diff --git a/libraries/MySensors/MyConfig.h b/libraries/MySensors/MyConfig.h index d25a446..79b1c95 100644 --- a/libraries/MySensors/MyConfig.h +++ b/libraries/MySensors/MyConfig.h @@ -6,12 +6,15 @@ */ // pick ONE of these - other board layouts can be easily added this way -#define MYSENSORS_SENSOR -//#define MYSENSORS_SERIAL_GATEWAY +// #define MYSENSORS_SENSOR +#define MYSENSORS_SERIAL_GATEWAY //#define MYSENSORS_ETHERNET_MQTT_GATEWAY // Choose radio type by enabling one of the following -#define MYSENSORS_RF_NRF24 +//#define MYSENSORS_RF_NRF24 +#define MYSENSORS_RF_RF69 + + @@ -20,6 +23,11 @@ typedef class MyDriverNRF24 MyDriverClass; #endif +#ifdef MYSENSORS_RF_RF69 +#include "MyDriverRF69.h" +typedef class MyDriverRF69 MyDriverClass; +#endif + /*** * Enable/Disable debug logging */ diff --git a/libraries/MySensors/MyDriverNRF24.cpp b/libraries/MySensors/MyDriverNRF24.cpp index f59f2d5..a6b3ac1 100644 --- a/libraries/MySensors/MyDriverNRF24.cpp +++ b/libraries/MySensors/MyDriverNRF24.cpp @@ -15,13 +15,13 @@ void MyDriverNRF24::init() { } rf24->setAutoAck(1); rf24->setAutoAck(BROADCAST_PIPE,false); // Turn off auto ack for broadcast - rf24->enableAckPayload(); rf24->setChannel(RF24_CHANNEL); rf24->setPALevel(RF24_PA_LEVEL); rf24->setDataRate(RF24_DATARATE); rf24->setRetries(5,15); rf24->setCRCLength(RF24_CRC_16); rf24->enableDynamicPayloads(); + rf24->enableDynamicAck(); // All nodes listen to broadcast pipe (for FIND_PARENT_RESPONSE messages) rf24->openReadingPipe(BROADCAST_PIPE, TO_ADDR(BROADCAST_ADDRESS)); diff --git a/libraries/MySensors/MyDriverRF69.cpp b/libraries/MySensors/MyDriverRF69.cpp new file mode 100644 index 0000000..126e364 --- /dev/null +++ b/libraries/MySensors/MyDriverRF69.cpp @@ -0,0 +1,50 @@ +#include +#include "MyDriver.h" +#include "MyDriverRF69.h" + +MyDriverRF69::MyDriverRF69() : MyDriver() { + radio = new RFM69(); +} + +void MyDriverRF69::init() { + // Start up the radio library + radio->initialize(FREQUENCY,_address,NETWORKID); +#ifdef IS_RFM69HW + radio->setHighPower(); //uncomment only for RFM69HW! +#endif + // radio->encrypt(ENCRYPTKEY); + +} + +void MyDriverRF69::setAddress(uint8_t address) { + _address = address; + radio->setAddress(address); +} + +uint8_t MyDriverRF69::getAddress() { + return _address; +} + +bool MyDriverRF69::send(uint8_t to, const void* data, uint8_t len) { + // Make sure radio has powered up + return radio->sendWithRetry(to,data,len); +} + +bool MyDriverRF69::available(uint8_t *to) { + return radio->receiveDone(); +} + +uint8_t MyDriverRF69::receive(void* data) { + // for (byte i = 0; i < radio->DATALEN; i++){ + // data[i]= (void)radio->DATA[i]; + // } + memcpy(data,(const void *)radio->DATA, radio->DATALEN); + if (radio->ACKRequested()) + { + radio->sendACK(); + } +} + +void MyDriverRF69::powerDown() { + radio->sleep(); +} diff --git a/libraries/MySensors/MyDriverRF69.h b/libraries/MySensors/MyDriverRF69.h new file mode 100644 index 0000000..4c53786 --- /dev/null +++ b/libraries/MySensors/MyDriverRF69.h @@ -0,0 +1,44 @@ +#ifndef MyCommDriver_h +#define MyCommDriver_h + +#include "MyConfig.h" +#include "MyDriver.h" +#include +#include "RFM69.h" +#include + +#define NODEID 2 //unique for each node on same network +#define NETWORKID 100 //the same on all nodes that talk to each other +#define GATEWAYID 1 +//Match frequency to the hardware version of the radio on your Moteino (uncomment one): +// #define FREQUENCY RF69_433MHZ +#define FREQUENCY RF69_868MHZ +//#define FREQUENCY RF69_915MHZ +#define ENCRYPTKEY "sampleEncryptKey" //exactly the same 16 characters/bytes on all nodes! +//#define IS_RFM69HW //uncomment only for RFM69HW! Leave out if you have RFM69W! +#define ACK_TIME 30 // max # of ms to wait for an ack +#ifdef __AVR_ATmega1284P__ + #define LED 15 // Moteino MEGAs have LEDs on D15 + #define FLASH_SS 23 // and FLASH SS on D23 +#else + #define LED 9 // Moteinos have LEDs on D9 + #define FLASH_SS 8 // and FLASH SS on D8 +#endif + +class MyDriverRF69 : public MyDriver +{ +public: + MyDriverRF69(); + void init(); + void setAddress(uint8_t address); + uint8_t getAddress(); + bool send(uint8_t to, const void* data, uint8_t len); + bool available(uint8_t *to); + uint8_t receive(void* data); + void powerDown(); +private: + RFM69 *radio = NULL; + uint8_t _address; +}; + +#endif \ No newline at end of file diff --git a/libraries/MySensors/MySensor.cpp b/libraries/MySensors/MySensor.cpp index bf8205f..c56da76 100755 --- a/libraries/MySensors/MySensor.cpp +++ b/libraries/MySensors/MySensor.cpp @@ -275,6 +275,7 @@ boolean MySensor::process() { msg.sender, msg.last, msg.destination, msg.sensor, mGetCommand(msg), msg.type, mGetPayloadType(msg), mGetLength(msg), msg.getString(convBuf)); if(!(mGetVersion(msg) == PROTOCOL_VERSION)) { + debug(PSTR("version: %d\n"),mGetVersion(msg)); debug(PSTR("version mismatch\n")); return false; } diff --git a/libraries/MySensors/RFM69.cpp b/libraries/MySensors/RFM69.cpp new file mode 100644 index 0000000..8b0305f --- /dev/null +++ b/libraries/MySensors/RFM69.cpp @@ -0,0 +1,464 @@ +// ********************************************************************************** +// Driver definition for HopeRF RFM69W/RFM69HW/RFM69CW/RFM69HCW, Semtech SX1231/1231H +// ********************************************************************************** +// Copyright Felix Rusu (2014), felix@lowpowerlab.com +// http://lowpowerlab.com/ +// ********************************************************************************** +// License +// ********************************************************************************** +// This program is free software; you can redistribute it +// and/or modify it under the terms of the GNU General +// Public License as published by the Free Software +// Foundation; either version 2 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will +// be useful, but WITHOUT ANY WARRANTY; without even the +// implied warranty of MERCHANTABILITY or FITNESS FOR A +// PARTICULAR PURPOSE. See the GNU General Public +// License for more details. +// +// You should have received a copy of the GNU General +// Public License along with this program; if not, write +// to the Free Software Foundation, Inc., +// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +// +// Licence can be viewed at +// http://www.fsf.org/licenses/gpl.txt +// +// Please maintain this license information along with authorship +// and copyright notices in any redistribution of this code +// ********************************************************************************** +#include +#include +#include + +volatile byte RFM69::DATA[RF69_MAX_DATA_LEN]; +volatile byte RFM69::_mode; // current transceiver state +volatile byte RFM69::DATALEN; +volatile byte RFM69::SENDERID; +volatile byte RFM69::TARGETID; //should match _address +volatile byte RFM69::PAYLOADLEN; +volatile byte RFM69::ACK_REQUESTED; +volatile byte RFM69::ACK_RECEIVED; /// Should be polled immediately after sending a packet with ACK request +volatile int RFM69::RSSI; //most accurate RSSI during reception (closest to the reception) +RFM69* RFM69::selfPointer; + +bool RFM69::initialize(byte freqBand, byte nodeID, byte networkID) +{ + const byte CONFIG[][2] = + { + /* 0x01 */ { REG_OPMODE, RF_OPMODE_SEQUENCER_ON | RF_OPMODE_LISTEN_OFF | RF_OPMODE_STANDBY }, + /* 0x02 */ { REG_DATAMODUL, RF_DATAMODUL_DATAMODE_PACKET | RF_DATAMODUL_MODULATIONTYPE_FSK | RF_DATAMODUL_MODULATIONSHAPING_00 }, //no shaping + /* 0x03 */ { REG_BITRATEMSB, RF_BITRATEMSB_55555}, //default:4.8 KBPS + /* 0x04 */ { REG_BITRATELSB, RF_BITRATELSB_55555}, + /* 0x05 */ { REG_FDEVMSB, RF_FDEVMSB_50000}, //default:5khz, (FDEV + BitRate/2 <= 500Khz) + /* 0x06 */ { REG_FDEVLSB, RF_FDEVLSB_50000}, + + /* 0x07 */ { REG_FRFMSB, (freqBand==RF69_315MHZ ? RF_FRFMSB_315 : (freqBand==RF69_433MHZ ? RF_FRFMSB_433 : (freqBand==RF69_868MHZ ? RF_FRFMSB_868 : RF_FRFMSB_915))) }, + /* 0x08 */ { REG_FRFMID, (freqBand==RF69_315MHZ ? RF_FRFMID_315 : (freqBand==RF69_433MHZ ? RF_FRFMID_433 : (freqBand==RF69_868MHZ ? RF_FRFMID_868 : RF_FRFMID_915))) }, + /* 0x09 */ { REG_FRFLSB, (freqBand==RF69_315MHZ ? RF_FRFLSB_315 : (freqBand==RF69_433MHZ ? RF_FRFLSB_433 : (freqBand==RF69_868MHZ ? RF_FRFLSB_868 : RF_FRFLSB_915))) }, + + // looks like PA1 and PA2 are not implemented on RFM69W, hence the max output power is 13dBm + // +17dBm and +20dBm are possible on RFM69HW + // +13dBm formula: Pout=-18+OutputPower (with PA0 or PA1**) + // +17dBm formula: Pout=-14+OutputPower (with PA1 and PA2)** + // +20dBm formula: Pout=-11+OutputPower (with PA1 and PA2)** and high power PA settings (section 3.3.7 in datasheet) + ///* 0x11 */ { REG_PALEVEL, RF_PALEVEL_PA0_ON | RF_PALEVEL_PA1_OFF | RF_PALEVEL_PA2_OFF | RF_PALEVEL_OUTPUTPOWER_11111}, + ///* 0x13 */ { REG_OCP, RF_OCP_ON | RF_OCP_TRIM_95 }, //over current protection (default is 95mA) + + // RXBW defaults are { REG_RXBW, RF_RXBW_DCCFREQ_010 | RF_RXBW_MANT_24 | RF_RXBW_EXP_5} (RxBw: 10.4khz) + /* 0x19 */ { REG_RXBW, RF_RXBW_DCCFREQ_010 | RF_RXBW_MANT_16 | RF_RXBW_EXP_2 }, //(BitRate < 2 * RxBw) + //for BR-19200: //* 0x19 */ { REG_RXBW, RF_RXBW_DCCFREQ_010 | RF_RXBW_MANT_24 | RF_RXBW_EXP_3 }, + /* 0x25 */ { REG_DIOMAPPING1, RF_DIOMAPPING1_DIO0_01 }, //DIO0 is the only IRQ we're using + /* 0x29 */ { REG_RSSITHRESH, 220 }, //must be set to dBm = (-Sensitivity / 2) - default is 0xE4=228 so -114dBm + ///* 0x2d */ { REG_PREAMBLELSB, RF_PREAMBLESIZE_LSB_VALUE } // default 3 preamble bytes 0xAAAAAA + /* 0x2e */ { REG_SYNCCONFIG, RF_SYNC_ON | RF_SYNC_FIFOFILL_AUTO | RF_SYNC_SIZE_2 | RF_SYNC_TOL_0 }, + /* 0x2f */ { REG_SYNCVALUE1, 0x2D }, //attempt to make this compatible with sync1 byte of RFM12B lib + /* 0x30 */ { REG_SYNCVALUE2, networkID }, //NETWORK ID + /* 0x37 */ { REG_PACKETCONFIG1, RF_PACKET1_FORMAT_VARIABLE | RF_PACKET1_DCFREE_OFF | RF_PACKET1_CRC_ON | RF_PACKET1_CRCAUTOCLEAR_ON | RF_PACKET1_ADRSFILTERING_OFF }, + /* 0x38 */ { REG_PAYLOADLENGTH, 66 }, //in variable length mode: the max frame size, not used in TX + //* 0x39 */ { REG_NODEADRS, nodeID }, //turned off because we're not using address filtering + /* 0x3C */ { REG_FIFOTHRESH, RF_FIFOTHRESH_TXSTART_FIFONOTEMPTY | RF_FIFOTHRESH_VALUE }, //TX on FIFO not empty + /* 0x3d */ { REG_PACKETCONFIG2, RF_PACKET2_RXRESTARTDELAY_2BITS | RF_PACKET2_AUTORXRESTART_ON | RF_PACKET2_AES_OFF }, //RXRESTARTDELAY must match transmitter PA ramp-down time (bitrate dependent) + //for BR-19200: //* 0x3d */ { REG_PACKETCONFIG2, RF_PACKET2_RXRESTARTDELAY_NONE | RF_PACKET2_AUTORXRESTART_ON | RF_PACKET2_AES_OFF }, //RXRESTARTDELAY must match transmitter PA ramp-down time (bitrate dependent) + //* 0x6F */ { REG_TESTDAGC, RF_DAGC_CONTINUOUS }, // run DAGC continuously in RX mode + /* 0x6F */ { REG_TESTDAGC, RF_DAGC_IMPROVED_LOWBETA0 }, // run DAGC continuously in RX mode, recommended default for AfcLowBetaOn=0 + {255, 0} + }; + + pinMode(_slaveSelectPin, OUTPUT); + SPI.begin(); + + do writeReg(REG_SYNCVALUE1, 0xaa); while (readReg(REG_SYNCVALUE1) != 0xaa); + do writeReg(REG_SYNCVALUE1, 0x55); while (readReg(REG_SYNCVALUE1) != 0x55); + + for (byte i = 0; CONFIG[i][0] != 255; i++) + writeReg(CONFIG[i][0], CONFIG[i][1]); + + // Encryption is persistent between resets and can trip you up during debugging. + // Disable it during initialization so we always start from a known state. + encrypt(0); + + setHighPower(_isRFM69HW); //called regardless if it's a RFM69W or RFM69HW + setMode(RF69_MODE_STANDBY); + while ((readReg(REG_IRQFLAGS1) & RF_IRQFLAGS1_MODEREADY) == 0x00); // Wait for ModeReady + attachInterrupt(_interruptNum, RFM69::isr0, RISING); + + selfPointer = this; + _address = nodeID; + return true; +} + +void RFM69::setFrequency(uint32_t FRF) +{ + writeReg(REG_FRFMSB, FRF >> 16); + writeReg(REG_FRFMID, FRF >> 8); + writeReg(REG_FRFLSB, FRF); +} + +void RFM69::setMode(byte newMode) +{ + if (newMode == _mode) return; //TODO: can remove this? + + switch (newMode) { + case RF69_MODE_TX: + writeReg(REG_OPMODE, (readReg(REG_OPMODE) & 0xE3) | RF_OPMODE_TRANSMITTER); + if (_isRFM69HW) setHighPowerRegs(true); + break; + case RF69_MODE_RX: + writeReg(REG_OPMODE, (readReg(REG_OPMODE) & 0xE3) | RF_OPMODE_RECEIVER); + if (_isRFM69HW) setHighPowerRegs(false); + break; + case RF69_MODE_SYNTH: + writeReg(REG_OPMODE, (readReg(REG_OPMODE) & 0xE3) | RF_OPMODE_SYNTHESIZER); + break; + case RF69_MODE_STANDBY: + writeReg(REG_OPMODE, (readReg(REG_OPMODE) & 0xE3) | RF_OPMODE_STANDBY); + break; + case RF69_MODE_SLEEP: + writeReg(REG_OPMODE, (readReg(REG_OPMODE) & 0xE3) | RF_OPMODE_SLEEP); + break; + default: return; + } + + // we are using packet mode, so this check is not really needed + // but waiting for mode ready is necessary when going from sleep because the FIFO may not be immediately available from previous mode + while (_mode == RF69_MODE_SLEEP && (readReg(REG_IRQFLAGS1) & RF_IRQFLAGS1_MODEREADY) == 0x00); // Wait for ModeReady + + _mode = newMode; +} + +void RFM69::sleep() { + setMode(RF69_MODE_SLEEP); +} + +void RFM69::setAddress(byte addr) +{ + _address = addr; + writeReg(REG_NODEADRS, _address); +} + +// set output power: 0=min, 31=max +// this results in a "weaker" transmitted signal, and directly results in a lower RSSI at the receiver +void RFM69::setPowerLevel(byte powerLevel) +{ + _powerLevel = powerLevel; + writeReg(REG_PALEVEL, (readReg(REG_PALEVEL) & 0xE0) | (_powerLevel > 31 ? 31 : _powerLevel)); +} + +bool RFM69::canSend() +{ + if (_mode == RF69_MODE_RX && PAYLOADLEN == 0 && readRSSI() < CSMA_LIMIT) //if signal stronger than -100dBm is detected assume channel activity + { + setMode(RF69_MODE_STANDBY); + return true; + } + return false; +} + +void RFM69::send(byte toAddress, const void* buffer, byte bufferSize, bool requestACK) +{ + writeReg(REG_PACKETCONFIG2, (readReg(REG_PACKETCONFIG2) & 0xFB) | RF_PACKET2_RXRESTART); // avoid RX deadlocks + long now = millis(); + while (!canSend() && millis()-now < RF69_CSMA_LIMIT_MS) receiveDone(); + sendFrame(toAddress, buffer, bufferSize, requestACK, false); +} + +// to increase the chance of getting a packet across, call this function instead of send +// and it handles all the ACK requesting/retrying for you :) +// The only twist is that you have to manually listen to ACK requests on the other side and send back the ACKs +// The reason for the semi-automaton is that the lib is ingterrupt driven and +// requires user action to read the received data and decide what to do with it +// replies usually take only 5-8ms at 50kbps@915Mhz +bool RFM69::sendWithRetry(byte toAddress, const void* buffer, byte bufferSize, byte retries, byte retryWaitTime) { + long sentTime; + for (byte i=0; i<=retries; i++) + { + send(toAddress, buffer, bufferSize, true); + sentTime = millis(); + while (millis()-sentTime RF69_MAX_DATA_LEN) bufferSize = RF69_MAX_DATA_LEN; + + //write to FIFO + select(); + SPI.transfer(REG_FIFO | 0x80); + SPI.transfer(bufferSize + 3); + SPI.transfer(toAddress); + SPI.transfer(_address); + + //control byte + if (sendACK) + SPI.transfer(0x80); + else if (requestACK) + SPI.transfer(0x40); + else SPI.transfer(0x00); + + for (byte i = 0; i < bufferSize; i++) + SPI.transfer(((byte*)buffer)[i]); + unselect(); + + /* no need to wait for transmit mode to be ready since its handled by the radio */ + setMode(RF69_MODE_TX); + while (digitalRead(_interruptPin) == 0); //wait for DIO0 to turn HIGH signalling transmission finish + //while (readReg(REG_IRQFLAGS2) & RF_IRQFLAGS2_PACKETSENT == 0x00); // Wait for ModeReady + setMode(RF69_MODE_STANDBY); +} + +void RFM69::interruptHandler() { + //pinMode(4, OUTPUT); + //digitalWrite(4, 1); + if (_mode == RF69_MODE_RX && (readReg(REG_IRQFLAGS2) & RF_IRQFLAGS2_PAYLOADREADY)) + { + //RSSI = readRSSI(); + setMode(RF69_MODE_STANDBY); + select(); + SPI.transfer(REG_FIFO & 0x7f); + PAYLOADLEN = SPI.transfer(0); + PAYLOADLEN = PAYLOADLEN > 66 ? 66 : PAYLOADLEN; //precaution + TARGETID = SPI.transfer(0); + if(!(_promiscuousMode || TARGETID==_address || TARGETID==RF69_BROADCAST_ADDR)) //match this node's address, or broadcast address or anything in promiscuous mode + { + PAYLOADLEN = 0; + unselect(); + //digitalWrite(4, 0); + return; + } + DATALEN = PAYLOADLEN - 3; + SENDERID = SPI.transfer(0); + byte CTLbyte = SPI.transfer(0); + + ACK_RECEIVED = CTLbyte & 0x80; //extract ACK-requested flag + ACK_REQUESTED = CTLbyte & 0x40; //extract ACK-received flag + + for (byte i= 0; i < DATALEN; i++) + { + DATA[i] = SPI.transfer(0); + } + if (DATALENinterruptHandler(); } + +void RFM69::receiveBegin() { + DATALEN = 0; + SENDERID = 0; + TARGETID = 0; + PAYLOADLEN = 0; + ACK_REQUESTED = 0; + ACK_RECEIVED = 0; + RSSI = 0; + if (readReg(REG_IRQFLAGS2) & RF_IRQFLAGS2_PAYLOADREADY) + writeReg(REG_PACKETCONFIG2, (readReg(REG_PACKETCONFIG2) & 0xFB) | RF_PACKET2_RXRESTART); // avoid RX deadlocks + writeReg(REG_DIOMAPPING1, RF_DIOMAPPING1_DIO0_01); //set DIO0 to "PAYLOADREADY" in receive mode + setMode(RF69_MODE_RX); +} + +bool RFM69::receiveDone() { +// ATOMIC_BLOCK(ATOMIC_FORCEON) +// { + noInterrupts(); //re-enabled in unselect() via setMode() or via receiveBegin() + if (_mode == RF69_MODE_RX && PAYLOADLEN>0) + { + setMode(RF69_MODE_STANDBY); //enables interrupts + return true; + } + else if (_mode == RF69_MODE_RX) //already in RX no payload yet + { + interrupts(); //explicitly re-enable interrupts + return false; + } + receiveBegin(); + return false; +//} +} + +// To enable encryption: radio.encrypt("ABCDEFGHIJKLMNOP"); +// To disable encryption: radio.encrypt(null) or radio.encrypt(0) +// KEY HAS TO BE 16 bytes !!! +void RFM69::encrypt(const char* key) { + setMode(RF69_MODE_STANDBY); + if (key!=0) + { + select(); + SPI.transfer(REG_AESKEY1 | 0x80); + for (byte i = 0; i<16; i++) + SPI.transfer(key[i]); + unselect(); + } + writeReg(REG_PACKETCONFIG2, (readReg(REG_PACKETCONFIG2) & 0xFE) | (key ? 1 : 0)); +} + +int RFM69::readRSSI(bool forceTrigger) { + int rssi = 0; + if (forceTrigger) + { + //RSSI trigger not needed if DAGC is in continuous mode + writeReg(REG_RSSICONFIG, RF_RSSI_START); + while ((readReg(REG_RSSICONFIG) & RF_RSSI_DONE) == 0x00); // Wait for RSSI_Ready + } + rssi = -readReg(REG_RSSIVALUE); + rssi >>= 1; + return rssi; +} + +byte RFM69::readReg(byte addr) +{ + select(); + SPI.transfer(addr & 0x7F); + byte regval = SPI.transfer(0); + unselect(); + return regval; +} + +void RFM69::writeReg(byte addr, byte value) +{ + select(); + SPI.transfer(addr | 0x80); + SPI.transfer(value); + unselect(); +} + +/// Select the transceiver +void RFM69::select() { + noInterrupts(); + //save current SPI settings + _SPCR = SPCR; + _SPSR = SPSR; + //set RFM69 SPI settings + SPI.setDataMode(SPI_MODE0); + SPI.setBitOrder(MSBFIRST); + SPI.setClockDivider(SPI_CLOCK_DIV4); //decided to slow down from DIV2 after SPI stalling in some instances, especially visible on mega1284p when RFM69 and FLASH chip both present + digitalWrite(_slaveSelectPin, LOW); +} + +/// UNselect the transceiver chip +void RFM69::unselect() { + digitalWrite(_slaveSelectPin, HIGH); + //restore SPI settings to what they were before talking to RFM69 + SPCR = _SPCR; + SPSR = _SPSR; + interrupts(); +} + +// ON = disable filtering to capture all frames on network +// OFF = enable node+broadcast filtering to capture only frames sent to this/broadcast address +void RFM69::promiscuous(bool onOff) { + _promiscuousMode=onOff; + //writeReg(REG_PACKETCONFIG1, (readReg(REG_PACKETCONFIG1) & 0xF9) | (onOff ? RF_PACKET1_ADRSFILTERING_OFF : RF_PACKET1_ADRSFILTERING_NODEBROADCAST)); +} + +void RFM69::setHighPower(bool onOff) { + _isRFM69HW = onOff; + writeReg(REG_OCP, _isRFM69HW ? RF_OCP_OFF : RF_OCP_ON); + if (_isRFM69HW) //turning ON + writeReg(REG_PALEVEL, (readReg(REG_PALEVEL) & 0x1F) | RF_PALEVEL_PA1_ON | RF_PALEVEL_PA2_ON); //enable P1 & P2 amplifier stages + else + writeReg(REG_PALEVEL, RF_PALEVEL_PA0_ON | RF_PALEVEL_PA1_OFF | RF_PALEVEL_PA2_OFF | _powerLevel); //enable P0 only +} + +void RFM69::setHighPowerRegs(bool onOff) { + writeReg(REG_TESTPA1, onOff ? 0x5D : 0x55); + writeReg(REG_TESTPA2, onOff ? 0x7C : 0x70); +} + +void RFM69::setCS(byte newSPISlaveSelect) { + _slaveSelectPin = newSPISlaveSelect; + pinMode(_slaveSelectPin, OUTPUT); +} + +//for debugging +void RFM69::readAllRegs() +{ + byte regVal; + + for (byte regAddr = 1; regAddr <= 0x4F; regAddr++) + { + select(); + SPI.transfer(regAddr & 0x7f); // send address + r/w bit + regVal = SPI.transfer(0); + unselect(); + + Serial.print(regAddr, HEX); + Serial.print(" - "); + Serial.print(regVal,HEX); + Serial.print(" - "); + Serial.println(regVal,BIN); + } + unselect(); +} + +byte RFM69::readTemperature(byte calFactor) //returns centigrade +{ + setMode(RF69_MODE_STANDBY); + writeReg(REG_TEMP1, RF_TEMP1_MEAS_START); + while ((readReg(REG_TEMP1) & RF_TEMP1_MEAS_RUNNING)) Serial.print('*'); + return ~readReg(REG_TEMP2) + COURSE_TEMP_COEF + calFactor; //'complement'corrects the slope, rising temp = rising val +} // COURSE_TEMP_COEF puts reading in the ballpark, user can add additional correction + +void RFM69::rcCalibration() +{ + writeReg(REG_OSC1, RF_OSC1_RCCAL_START); + while ((readReg(REG_OSC1) & RF_OSC1_RCCAL_DONE) == 0x00); +} \ No newline at end of file diff --git a/libraries/MySensors/RFM69.h b/libraries/MySensors/RFM69.h new file mode 100644 index 0000000..23eb044 --- /dev/null +++ b/libraries/MySensors/RFM69.h @@ -0,0 +1,136 @@ +// ********************************************************************************** +// Driver definition for HopeRF RFM69W/RFM69HW/RFM69CW/RFM69HCW, Semtech SX1231/1231H +// ********************************************************************************** +// Copyright Felix Rusu (2014), felix@lowpowerlab.com +// http://lowpowerlab.com/ +// ********************************************************************************** +// License +// ********************************************************************************** +// This program is free software; you can redistribute it +// and/or modify it under the terms of the GNU General +// Public License as published by the Free Software +// Foundation; either version 2 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will +// be useful, but WITHOUT ANY WARRANTY; without even the +// implied warranty of MERCHANTABILITY or FITNESS FOR A +// PARTICULAR PURPOSE. See the GNU General Public +// License for more details. +// +// You should have received a copy of the GNU General +// Public License along with this program; if not, write +// to the Free Software Foundation, Inc., +// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +// +// Licence can be viewed at +// http://www.fsf.org/licenses/gpl.txt +// +// Please maintain this license information along with authorship +// and copyright notices in any redistribution of this code +// ********************************************************************************** +#ifndef RFM69_h +#define RFM69_h +#include //assumes Arduino IDE v1.0 or greater + +#define RF69_MAX_DATA_LEN 61 // to take advantage of the built in AES/CRC we want to limit the frame size to the internal FIFO size (66 bytes - 3 bytes overhead) +#define RF69_SPI_CS SS // SS is the SPI slave select pin, for instance D10 on atmega328 + +// INT0 on AVRs should be connected to RFM69's DIO0 (ex on Atmega328 it's D2, on Atmega644/1284 it's D2) +#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega88) || defined(__AVR_ATmega8__) || defined(__AVR_ATmega88__) || defined(__AVR_ATmega32U4__) + #define RF69_IRQ_PIN 2 + #define RF69_IRQ_NUM 0 +#elif defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__) + #define RF69_IRQ_PIN 2 + #define RF69_IRQ_NUM 2 +#endif + +#define CSMA_LIMIT -90 // upper RX signal sensitivity threshold in dBm for carrier sense access +#define RF69_MODE_SLEEP 0 // XTAL OFF +#define RF69_MODE_STANDBY 1 // XTAL ON +#define RF69_MODE_SYNTH 2 // PLL ON +#define RF69_MODE_RX 3 // RX MODE +#define RF69_MODE_TX 4 // TX MODE + +//available frequency bands +#define RF69_315MHZ 31 // non trivial values to avoid misconfiguration +#define RF69_433MHZ 43 +#define RF69_868MHZ 86 +#define RF69_915MHZ 91 + +#define null 0 +#define COURSE_TEMP_COEF -90 // puts the temperature reading in the ballpark, user can fine tune the returned value +#define RF69_BROADCAST_ADDR 255 +#define RF69_CSMA_LIMIT_MS 1000 + +class RFM69 { + public: + static volatile byte DATA[RF69_MAX_DATA_LEN]; // recv/xmit buf, including hdr & crc bytes + static volatile byte DATALEN; + static volatile byte SENDERID; + static volatile byte TARGETID; //should match _address + static volatile byte PAYLOADLEN; + static volatile byte ACK_REQUESTED; + static volatile byte ACK_RECEIVED; /// Should be polled immediately after sending a packet with ACK request + static volatile int RSSI; //most accurate RSSI during reception (closest to the reception) + static volatile byte _mode; //should be protected? + + RFM69(byte slaveSelectPin=RF69_SPI_CS, byte interruptPin=RF69_IRQ_PIN, bool isRFM69HW=false, byte interruptNum=RF69_IRQ_NUM) { + _slaveSelectPin = slaveSelectPin; + _interruptPin = interruptPin; + _interruptNum = interruptNum; + _mode = RF69_MODE_STANDBY; + _promiscuousMode = false; + _powerLevel = 31; + _isRFM69HW = isRFM69HW; + } + + bool initialize(byte freqBand, byte ID, byte networkID=1); + void setAddress(byte addr); + bool canSend(); + void send(byte toAddress, const void* buffer, byte bufferSize, bool requestACK=false); + bool sendWithRetry(byte toAddress, const void* buffer, byte bufferSize, byte retries=2, byte retryWaitTime=40); //40ms roundtrip req for 61byte packets + bool receiveDone(); + bool ACKReceived(byte fromNodeID); + bool ACKRequested(); + void sendACK(const void* buffer = "", uint8_t bufferSize=0); + void setFrequency(uint32_t FRF); + void encrypt(const char* key); + void setCS(byte newSPISlaveSelect); + int readRSSI(bool forceTrigger=false); + void promiscuous(bool onOff=true); + void setHighPower(bool onOFF=true); //have to call it after initialize for RFM69HW + void setPowerLevel(byte level); //reduce/increase transmit power level + void sleep(); + byte readTemperature(byte calFactor=0); //get CMOS temperature (8bit) + void rcCalibration(); //calibrate the internal RC oscillator for use in wide temperature variations - see datasheet section [4.3.5. RC Timer Accuracy] + + // allow hacking registers by making these public + byte readReg(byte addr); + void writeReg(byte addr, byte val); + void readAllRegs(); + + protected: + static void isr0(); + void virtual interruptHandler(); + void sendFrame(byte toAddress, const void* buffer, byte size, bool requestACK=false, bool sendACK=false); + + static RFM69* selfPointer; + byte _slaveSelectPin; + byte _interruptPin; + byte _interruptNum; + byte _address; + bool _promiscuousMode; + byte _powerLevel; + bool _isRFM69HW; + byte _SPCR; + byte _SPSR; + + void receiveBegin(); + void setMode(byte mode); + void setHighPowerRegs(bool onOff); + void select(); + void unselect(); +}; + +#endif diff --git a/libraries/MySensors/RFM69registers.h b/libraries/MySensors/RFM69registers.h new file mode 100644 index 0000000..ff720b1 --- /dev/null +++ b/libraries/MySensors/RFM69registers.h @@ -0,0 +1,1069 @@ +// ********************************************************************************** +// Registers used in driver definition for HopeRF RFM69W/RFM69HW, Semtech SX1231/1231H +// ********************************************************************************** +// Copyright Felix Rusu (2014), felix@lowpowerlab.com +// http://lowpowerlab.com/ +// ********************************************************************************** +// License +// ********************************************************************************** +// This program is free software; you can redistribute it +// and/or modify it under the terms of the GNU General +// Public License as published by the Free Software +// Foundation; either version 2 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will +// be useful, but WITHOUT ANY WARRANTY; without even the +// implied warranty of MERCHANTABILITY or FITNESS FOR A +// PARTICULAR PURPOSE. See the GNU General Public +// License for more details. +// +// You should have received a copy of the GNU General +// Public License along with this program; if not, write +// to the Free Software Foundation, Inc., +// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +// +// Licence can be viewed at +// http://www.fsf.org/licenses/gpl.txt +// +// Please maintain this license information along with authorship +// and copyright notices in any redistribution of this code +// ********************************************************************************** +// RFM69/SX1231 Internal registers addresses +//************************************************** +#define REG_FIFO 0x00 +#define REG_OPMODE 0x01 +#define REG_DATAMODUL 0x02 +#define REG_BITRATEMSB 0x03 +#define REG_BITRATELSB 0x04 +#define REG_FDEVMSB 0x05 +#define REG_FDEVLSB 0x06 +#define REG_FRFMSB 0x07 +#define REG_FRFMID 0x08 +#define REG_FRFLSB 0x09 +#define REG_OSC1 0x0A +#define REG_AFCCTRL 0x0B +#define REG_LOWBAT 0x0C +#define REG_LISTEN1 0x0D +#define REG_LISTEN2 0x0E +#define REG_LISTEN3 0x0F +#define REG_VERSION 0x10 +#define REG_PALEVEL 0x11 +#define REG_PARAMP 0x12 +#define REG_OCP 0x13 +#define REG_AGCREF 0x14 +#define REG_AGCTHRESH1 0x15 +#define REG_AGCTHRESH2 0x16 +#define REG_AGCTHRESH3 0x17 +#define REG_LNA 0x18 +#define REG_RXBW 0x19 +#define REG_AFCBW 0x1A +#define REG_OOKPEAK 0x1B +#define REG_OOKAVG 0x1C +#define REG_OOKFIX 0x1D +#define REG_AFCFEI 0x1E +#define REG_AFCMSB 0x1F +#define REG_AFCLSB 0x20 +#define REG_FEIMSB 0x21 +#define REG_FEILSB 0x22 +#define REG_RSSICONFIG 0x23 +#define REG_RSSIVALUE 0x24 +#define REG_DIOMAPPING1 0x25 +#define REG_DIOMAPPING2 0x26 +#define REG_IRQFLAGS1 0x27 +#define REG_IRQFLAGS2 0x28 +#define REG_RSSITHRESH 0x29 +#define REG_RXTIMEOUT1 0x2A +#define REG_RXTIMEOUT2 0x2B +#define REG_PREAMBLEMSB 0x2C +#define REG_PREAMBLELSB 0x2D +#define REG_SYNCCONFIG 0x2E +#define REG_SYNCVALUE1 0x2F +#define REG_SYNCVALUE2 0x30 +#define REG_SYNCVALUE3 0x31 +#define REG_SYNCVALUE4 0x32 +#define REG_SYNCVALUE5 0x33 +#define REG_SYNCVALUE6 0x34 +#define REG_SYNCVALUE7 0x35 +#define REG_SYNCVALUE8 0x36 +#define REG_PACKETCONFIG1 0x37 +#define REG_PAYLOADLENGTH 0x38 +#define REG_NODEADRS 0x39 +#define REG_BROADCASTADRS 0x3A +#define REG_AUTOMODES 0x3B +#define REG_FIFOTHRESH 0x3C +#define REG_PACKETCONFIG2 0x3D +#define REG_AESKEY1 0x3E +#define REG_AESKEY2 0x3F +#define REG_AESKEY3 0x40 +#define REG_AESKEY4 0x41 +#define REG_AESKEY5 0x42 +#define REG_AESKEY6 0x43 +#define REG_AESKEY7 0x44 +#define REG_AESKEY8 0x45 +#define REG_AESKEY9 0x46 +#define REG_AESKEY10 0x47 +#define REG_AESKEY11 0x48 +#define REG_AESKEY12 0x49 +#define REG_AESKEY13 0x4A +#define REG_AESKEY14 0x4B +#define REG_AESKEY15 0x4C +#define REG_AESKEY16 0x4D +#define REG_TEMP1 0x4E +#define REG_TEMP2 0x4F +#define REG_TESTPA1 0x5A //only present on RFM69HW/SX1231H +#define REG_TESTPA2 0x5C //only present on RFM69HW/SX1231H +#define REG_TESTDAGC 0x6F + +//****************************************************** +// RF69/SX1231 bit control definition +//****************************************************** +// RegOpMode +#define RF_OPMODE_SEQUENCER_OFF 0x80 +#define RF_OPMODE_SEQUENCER_ON 0x00 // Default + +#define RF_OPMODE_LISTEN_ON 0x40 +#define RF_OPMODE_LISTEN_OFF 0x00 // Default + +#define RF_OPMODE_LISTENABORT 0x20 + +#define RF_OPMODE_SLEEP 0x00 +#define RF_OPMODE_STANDBY 0x04 // Default +#define RF_OPMODE_SYNTHESIZER 0x08 +#define RF_OPMODE_TRANSMITTER 0x0C +#define RF_OPMODE_RECEIVER 0x10 + +// RegDataModul +#define RF_DATAMODUL_DATAMODE_PACKET 0x00 // Default +#define RF_DATAMODUL_DATAMODE_CONTINUOUS 0x40 +#define RF_DATAMODUL_DATAMODE_CONTINUOUSNOBSYNC 0x60 + +#define RF_DATAMODUL_MODULATIONTYPE_FSK 0x00 // Default +#define RF_DATAMODUL_MODULATIONTYPE_OOK 0x08 + +#define RF_DATAMODUL_MODULATIONSHAPING_00 0x00 // Default +#define RF_DATAMODUL_MODULATIONSHAPING_01 0x01 +#define RF_DATAMODUL_MODULATIONSHAPING_10 0x02 +#define RF_DATAMODUL_MODULATIONSHAPING_11 0x03 + +// RegBitRate (bits/sec) example bit rates +#define RF_BITRATEMSB_1200 0x68 +#define RF_BITRATELSB_1200 0x2B +#define RF_BITRATEMSB_2400 0x34 +#define RF_BITRATELSB_2400 0x15 +#define RF_BITRATEMSB_4800 0x1A // Default +#define RF_BITRATELSB_4800 0x0B // Default +#define RF_BITRATEMSB_9600 0x0D +#define RF_BITRATELSB_9600 0x05 +#define RF_BITRATEMSB_19200 0x06 +#define RF_BITRATELSB_19200 0x83 +#define RF_BITRATEMSB_38400 0x03 +#define RF_BITRATELSB_38400 0x41 + +#define RF_BITRATEMSB_38323 0x03 +#define RF_BITRATELSB_38323 0x43 + +#define RF_BITRATEMSB_34482 0x03 +#define RF_BITRATELSB_34482 0xA0 + +#define RF_BITRATEMSB_76800 0x01 +#define RF_BITRATELSB_76800 0xA1 +#define RF_BITRATEMSB_153600 0x00 +#define RF_BITRATELSB_153600 0xD0 +#define RF_BITRATEMSB_57600 0x02 +#define RF_BITRATELSB_57600 0x2C +#define RF_BITRATEMSB_115200 0x01 +#define RF_BITRATELSB_115200 0x16 +#define RF_BITRATEMSB_12500 0x0A +#define RF_BITRATELSB_12500 0x00 +#define RF_BITRATEMSB_25000 0x05 +#define RF_BITRATELSB_25000 0x00 +#define RF_BITRATEMSB_50000 0x02 +#define RF_BITRATELSB_50000 0x80 +#define RF_BITRATEMSB_100000 0x01 +#define RF_BITRATELSB_100000 0x40 +#define RF_BITRATEMSB_150000 0x00 +#define RF_BITRATELSB_150000 0xD5 +#define RF_BITRATEMSB_200000 0x00 +#define RF_BITRATELSB_200000 0xA0 +#define RF_BITRATEMSB_250000 0x00 +#define RF_BITRATELSB_250000 0x80 +#define RF_BITRATEMSB_300000 0x00 +#define RF_BITRATELSB_300000 0x6B +#define RF_BITRATEMSB_32768 0x03 +#define RF_BITRATELSB_32768 0xD1 +//custom bit rates +#define RF_BITRATEMSB_55555 0x02 +#define RF_BITRATELSB_55555 0x40 +#define RF_BITRATEMSB_200KBPS 0x00 +#define RF_BITRATELSB_200KBPS 0xa0 + +// RegFdev - frequency deviation (Hz) +#define RF_FDEVMSB_2000 0x00 +#define RF_FDEVLSB_2000 0x21 +#define RF_FDEVMSB_5000 0x00 // Default +#define RF_FDEVLSB_5000 0x52 // Default +#define RF_FDEVMSB_7500 0x00 +#define RF_FDEVLSB_7500 0x7B +#define RF_FDEVMSB_10000 0x00 +#define RF_FDEVLSB_10000 0xA4 +#define RF_FDEVMSB_15000 0x00 +#define RF_FDEVLSB_15000 0xF6 +#define RF_FDEVMSB_20000 0x01 +#define RF_FDEVLSB_20000 0x48 +#define RF_FDEVMSB_25000 0x01 +#define RF_FDEVLSB_25000 0x9A +#define RF_FDEVMSB_30000 0x01 +#define RF_FDEVLSB_30000 0xEC +#define RF_FDEVMSB_35000 0x02 +#define RF_FDEVLSB_35000 0x3D +#define RF_FDEVMSB_40000 0x02 +#define RF_FDEVLSB_40000 0x8F +#define RF_FDEVMSB_45000 0x02 +#define RF_FDEVLSB_45000 0xE1 +#define RF_FDEVMSB_50000 0x03 +#define RF_FDEVLSB_50000 0x33 +#define RF_FDEVMSB_55000 0x03 +#define RF_FDEVLSB_55000 0x85 +#define RF_FDEVMSB_60000 0x03 +#define RF_FDEVLSB_60000 0xD7 +#define RF_FDEVMSB_65000 0x04 +#define RF_FDEVLSB_65000 0x29 +#define RF_FDEVMSB_70000 0x04 +#define RF_FDEVLSB_70000 0x7B +#define RF_FDEVMSB_75000 0x04 +#define RF_FDEVLSB_75000 0xCD +#define RF_FDEVMSB_80000 0x05 +#define RF_FDEVLSB_80000 0x1F +#define RF_FDEVMSB_85000 0x05 +#define RF_FDEVLSB_85000 0x71 +#define RF_FDEVMSB_90000 0x05 +#define RF_FDEVLSB_90000 0xC3 +#define RF_FDEVMSB_95000 0x06 +#define RF_FDEVLSB_95000 0x14 +#define RF_FDEVMSB_100000 0x06 +#define RF_FDEVLSB_100000 0x66 +#define RF_FDEVMSB_110000 0x07 +#define RF_FDEVLSB_110000 0x0A +#define RF_FDEVMSB_120000 0x07 +#define RF_FDEVLSB_120000 0xAE +#define RF_FDEVMSB_130000 0x08 +#define RF_FDEVLSB_130000 0x52 +#define RF_FDEVMSB_140000 0x08 +#define RF_FDEVLSB_140000 0xF6 +#define RF_FDEVMSB_150000 0x09 +#define RF_FDEVLSB_150000 0x9A +#define RF_FDEVMSB_160000 0x0A +#define RF_FDEVLSB_160000 0x3D +#define RF_FDEVMSB_170000 0x0A +#define RF_FDEVLSB_170000 0xE1 +#define RF_FDEVMSB_180000 0x0B +#define RF_FDEVLSB_180000 0x85 +#define RF_FDEVMSB_190000 0x0C +#define RF_FDEVLSB_190000 0x29 +#define RF_FDEVMSB_200000 0x0C +#define RF_FDEVLSB_200000 0xCD +#define RF_FDEVMSB_210000 0x0D +#define RF_FDEVLSB_210000 0x71 +#define RF_FDEVMSB_220000 0x0E +#define RF_FDEVLSB_220000 0x14 +#define RF_FDEVMSB_230000 0x0E +#define RF_FDEVLSB_230000 0xB8 +#define RF_FDEVMSB_240000 0x0F +#define RF_FDEVLSB_240000 0x5C +#define RF_FDEVMSB_250000 0x10 +#define RF_FDEVLSB_250000 0x00 +#define RF_FDEVMSB_260000 0x10 +#define RF_FDEVLSB_260000 0xA4 +#define RF_FDEVMSB_270000 0x11 +#define RF_FDEVLSB_270000 0x48 +#define RF_FDEVMSB_280000 0x11 +#define RF_FDEVLSB_280000 0xEC +#define RF_FDEVMSB_290000 0x12 +#define RF_FDEVLSB_290000 0x8F +#define RF_FDEVMSB_300000 0x13 +#define RF_FDEVLSB_300000 0x33 + +// RegFrf (MHz) - carrier frequency +// 315Mhz band +#define RF_FRFMSB_314 0x4E +#define RF_FRFMID_314 0x80 +#define RF_FRFLSB_314 0x00 +#define RF_FRFMSB_315 0x4E +#define RF_FRFMID_315 0xC0 +#define RF_FRFLSB_315 0x00 +#define RF_FRFMSB_316 0x4F +#define RF_FRFMID_316 0x00 +#define RF_FRFLSB_316 0x00 +// 433mhz band +#define RF_FRFMSB_433 0x6C +#define RF_FRFMID_433 0x40 +#define RF_FRFLSB_433 0x00 +#define RF_FRFMSB_434 0x6C +#define RF_FRFMID_434 0x80 +#define RF_FRFLSB_434 0x00 +#define RF_FRFMSB_435 0x6C +#define RF_FRFMID_435 0xC0 +#define RF_FRFLSB_435 0x00 +// 868Mhz band +#define RF_FRFMSB_863 0xD7 +#define RF_FRFMID_863 0xC0 +#define RF_FRFLSB_863 0x00 +#define RF_FRFMSB_864 0xD8 +#define RF_FRFMID_864 0x00 +#define RF_FRFLSB_864 0x00 +#define RF_FRFMSB_865 0xD8 +#define RF_FRFMID_865 0x40 +#define RF_FRFLSB_865 0x00 +#define RF_FRFMSB_866 0xD8 +#define RF_FRFMID_866 0x80 +#define RF_FRFLSB_866 0x00 +#define RF_FRFMSB_867 0xD8 +#define RF_FRFMID_867 0xC0 +#define RF_FRFLSB_867 0x00 +#define RF_FRFMSB_868 0xD9 +#define RF_FRFMID_868 0x00 +#define RF_FRFLSB_868 0x00 +#define RF_FRFMSB_869 0xD9 +#define RF_FRFMID_869 0x40 +#define RF_FRFLSB_869 0x00 +#define RF_FRFMSB_870 0xD9 +#define RF_FRFMID_870 0x80 +#define RF_FRFLSB_870 0x00 +// 915Mhz band +#define RF_FRFMSB_902 0xE1 +#define RF_FRFMID_902 0x80 +#define RF_FRFLSB_902 0x00 +#define RF_FRFMSB_903 0xE1 +#define RF_FRFMID_903 0xC0 +#define RF_FRFLSB_903 0x00 +#define RF_FRFMSB_904 0xE2 +#define RF_FRFMID_904 0x00 +#define RF_FRFLSB_904 0x00 +#define RF_FRFMSB_905 0xE2 +#define RF_FRFMID_905 0x40 +#define RF_FRFLSB_905 0x00 +#define RF_FRFMSB_906 0xE2 +#define RF_FRFMID_906 0x80 +#define RF_FRFLSB_906 0x00 +#define RF_FRFMSB_907 0xE2 +#define RF_FRFMID_907 0xC0 +#define RF_FRFLSB_907 0x00 +#define RF_FRFMSB_908 0xE3 +#define RF_FRFMID_908 0x00 +#define RF_FRFLSB_908 0x00 +#define RF_FRFMSB_909 0xE3 +#define RF_FRFMID_909 0x40 +#define RF_FRFLSB_909 0x00 +#define RF_FRFMSB_910 0xE3 +#define RF_FRFMID_910 0x80 +#define RF_FRFLSB_910 0x00 +#define RF_FRFMSB_911 0xE3 +#define RF_FRFMID_911 0xC0 +#define RF_FRFLSB_911 0x00 +#define RF_FRFMSB_912 0xE4 +#define RF_FRFMID_912 0x00 +#define RF_FRFLSB_912 0x00 +#define RF_FRFMSB_913 0xE4 +#define RF_FRFMID_913 0x40 +#define RF_FRFLSB_913 0x00 +#define RF_FRFMSB_914 0xE4 +#define RF_FRFMID_914 0x80 +#define RF_FRFLSB_914 0x00 +#define RF_FRFMSB_915 0xE4 // Default +#define RF_FRFMID_915 0xC0 // Default +#define RF_FRFLSB_915 0x00 // Default +#define RF_FRFMSB_916 0xE5 +#define RF_FRFMID_916 0x00 +#define RF_FRFLSB_916 0x00 +#define RF_FRFMSB_917 0xE5 +#define RF_FRFMID_917 0x40 +#define RF_FRFLSB_917 0x00 +#define RF_FRFMSB_918 0xE5 +#define RF_FRFMID_918 0x80 +#define RF_FRFLSB_918 0x00 +#define RF_FRFMSB_919 0xE5 +#define RF_FRFMID_919 0xC0 +#define RF_FRFLSB_919 0x00 +#define RF_FRFMSB_920 0xE6 +#define RF_FRFMID_920 0x00 +#define RF_FRFLSB_920 0x00 +#define RF_FRFMSB_921 0xE6 +#define RF_FRFMID_921 0x40 +#define RF_FRFLSB_921 0x00 +#define RF_FRFMSB_922 0xE6 +#define RF_FRFMID_922 0x80 +#define RF_FRFLSB_922 0x00 +#define RF_FRFMSB_923 0xE6 +#define RF_FRFMID_923 0xC0 +#define RF_FRFLSB_923 0x00 +#define RF_FRFMSB_924 0xE7 +#define RF_FRFMID_924 0x00 +#define RF_FRFLSB_924 0x00 +#define RF_FRFMSB_925 0xE7 +#define RF_FRFMID_925 0x40 +#define RF_FRFLSB_925 0x00 +#define RF_FRFMSB_926 0xE7 +#define RF_FRFMID_926 0x80 +#define RF_FRFLSB_926 0x00 +#define RF_FRFMSB_927 0xE7 +#define RF_FRFMID_927 0xC0 +#define RF_FRFLSB_927 0x00 +#define RF_FRFMSB_928 0xE8 +#define RF_FRFMID_928 0x00 +#define RF_FRFLSB_928 0x00 + + +// RegOsc1 +#define RF_OSC1_RCCAL_START 0x80 +#define RF_OSC1_RCCAL_DONE 0x40 + +// RegLowBat +#define RF_LOWBAT_MONITOR 0x10 +#define RF_LOWBAT_ON 0x08 +#define RF_LOWBAT_OFF 0x00 // Default + +#define RF_LOWBAT_TRIM_1695 0x00 +#define RF_LOWBAT_TRIM_1764 0x01 +#define RF_LOWBAT_TRIM_1835 0x02 // Default +#define RF_LOWBAT_TRIM_1905 0x03 +#define RF_LOWBAT_TRIM_1976 0x04 +#define RF_LOWBAT_TRIM_2045 0x05 +#define RF_LOWBAT_TRIM_2116 0x06 +#define RF_LOWBAT_TRIM_2185 0x07 + + +// RegListen1 +#define RF_LISTEN1_RESOL_64 0x50 +#define RF_LISTEN1_RESOL_4100 0xA0 // Default +#define RF_LISTEN1_RESOL_262000 0xF0 + +#define RF_LISTEN1_CRITERIA_RSSI 0x00 // Default +#define RF_LISTEN1_CRITERIA_RSSIANDSYNC 0x08 + +#define RF_LISTEN1_END_00 0x00 +#define RF_LISTEN1_END_01 0x02 // Default +#define RF_LISTEN1_END_10 0x04 + + +// RegListen2 +#define RF_LISTEN2_COEFIDLE_VALUE 0xF5 // Default + +// RegListen3 +#define RF_LISTEN3_COEFRX_VALUE 0x20 // Default + +// RegPaLevel +#define RF_PALEVEL_PA0_ON 0x80 // Default +#define RF_PALEVEL_PA0_OFF 0x00 +#define RF_PALEVEL_PA1_ON 0x40 +#define RF_PALEVEL_PA1_OFF 0x00 // Default +#define RF_PALEVEL_PA2_ON 0x20 +#define RF_PALEVEL_PA2_OFF 0x00 // Default + +#define RF_PALEVEL_OUTPUTPOWER_00000 0x00 +#define RF_PALEVEL_OUTPUTPOWER_00001 0x01 +#define RF_PALEVEL_OUTPUTPOWER_00010 0x02 +#define RF_PALEVEL_OUTPUTPOWER_00011 0x03 +#define RF_PALEVEL_OUTPUTPOWER_00100 0x04 +#define RF_PALEVEL_OUTPUTPOWER_00101 0x05 +#define RF_PALEVEL_OUTPUTPOWER_00110 0x06 +#define RF_PALEVEL_OUTPUTPOWER_00111 0x07 +#define RF_PALEVEL_OUTPUTPOWER_01000 0x08 +#define RF_PALEVEL_OUTPUTPOWER_01001 0x09 +#define RF_PALEVEL_OUTPUTPOWER_01010 0x0A +#define RF_PALEVEL_OUTPUTPOWER_01011 0x0B +#define RF_PALEVEL_OUTPUTPOWER_01100 0x0C +#define RF_PALEVEL_OUTPUTPOWER_01101 0x0D +#define RF_PALEVEL_OUTPUTPOWER_01110 0x0E +#define RF_PALEVEL_OUTPUTPOWER_01111 0x0F +#define RF_PALEVEL_OUTPUTPOWER_10000 0x10 +#define RF_PALEVEL_OUTPUTPOWER_10001 0x11 +#define RF_PALEVEL_OUTPUTPOWER_10010 0x12 +#define RF_PALEVEL_OUTPUTPOWER_10011 0x13 +#define RF_PALEVEL_OUTPUTPOWER_10100 0x14 +#define RF_PALEVEL_OUTPUTPOWER_10101 0x15 +#define RF_PALEVEL_OUTPUTPOWER_10110 0x16 +#define RF_PALEVEL_OUTPUTPOWER_10111 0x17 +#define RF_PALEVEL_OUTPUTPOWER_11000 0x18 +#define RF_PALEVEL_OUTPUTPOWER_11001 0x19 +#define RF_PALEVEL_OUTPUTPOWER_11010 0x1A +#define RF_PALEVEL_OUTPUTPOWER_11011 0x1B +#define RF_PALEVEL_OUTPUTPOWER_11100 0x1C +#define RF_PALEVEL_OUTPUTPOWER_11101 0x1D +#define RF_PALEVEL_OUTPUTPOWER_11110 0x1E +#define RF_PALEVEL_OUTPUTPOWER_11111 0x1F // Default + + +// RegPaRamp +#define RF_PARAMP_3400 0x00 +#define RF_PARAMP_2000 0x01 +#define RF_PARAMP_1000 0x02 +#define RF_PARAMP_500 0x03 +#define RF_PARAMP_250 0x04 +#define RF_PARAMP_125 0x05 +#define RF_PARAMP_100 0x06 +#define RF_PARAMP_62 0x07 +#define RF_PARAMP_50 0x08 +#define RF_PARAMP_40 0x09 // Default +#define RF_PARAMP_31 0x0A +#define RF_PARAMP_25 0x0B +#define RF_PARAMP_20 0x0C +#define RF_PARAMP_15 0x0D +#define RF_PARAMP_12 0x0E +#define RF_PARAMP_10 0x0F + + +// RegOcp +#define RF_OCP_OFF 0x0F +#define RF_OCP_ON 0x1A // Default + +#define RF_OCP_TRIM_45 0x00 +#define RF_OCP_TRIM_50 0x01 +#define RF_OCP_TRIM_55 0x02 +#define RF_OCP_TRIM_60 0x03 +#define RF_OCP_TRIM_65 0x04 +#define RF_OCP_TRIM_70 0x05 +#define RF_OCP_TRIM_75 0x06 +#define RF_OCP_TRIM_80 0x07 +#define RF_OCP_TRIM_85 0x08 +#define RF_OCP_TRIM_90 0x09 +#define RF_OCP_TRIM_95 0x0A +#define RF_OCP_TRIM_100 0x0B // Default +#define RF_OCP_TRIM_105 0x0C +#define RF_OCP_TRIM_110 0x0D +#define RF_OCP_TRIM_115 0x0E +#define RF_OCP_TRIM_120 0x0F + + +// RegAgcRef +#define RF_AGCREF_AUTO_ON 0x40 // Default +#define RF_AGCREF_AUTO_OFF 0x00 + +#define RF_AGCREF_LEVEL_MINUS80 0x00 // Default +#define RF_AGCREF_LEVEL_MINUS81 0x01 +#define RF_AGCREF_LEVEL_MINUS82 0x02 +#define RF_AGCREF_LEVEL_MINUS83 0x03 +#define RF_AGCREF_LEVEL_MINUS84 0x04 +#define RF_AGCREF_LEVEL_MINUS85 0x05 +#define RF_AGCREF_LEVEL_MINUS86 0x06 +#define RF_AGCREF_LEVEL_MINUS87 0x07 +#define RF_AGCREF_LEVEL_MINUS88 0x08 +#define RF_AGCREF_LEVEL_MINUS89 0x09 +#define RF_AGCREF_LEVEL_MINUS90 0x0A +#define RF_AGCREF_LEVEL_MINUS91 0x0B +#define RF_AGCREF_LEVEL_MINUS92 0x0C +#define RF_AGCREF_LEVEL_MINUS93 0x0D +#define RF_AGCREF_LEVEL_MINUS94 0x0E +#define RF_AGCREF_LEVEL_MINUS95 0x0F +#define RF_AGCREF_LEVEL_MINUS96 0x10 +#define RF_AGCREF_LEVEL_MINUS97 0x11 +#define RF_AGCREF_LEVEL_MINUS98 0x12 +#define RF_AGCREF_LEVEL_MINUS99 0x13 +#define RF_AGCREF_LEVEL_MINUS100 0x14 +#define RF_AGCREF_LEVEL_MINUS101 0x15 +#define RF_AGCREF_LEVEL_MINUS102 0x16 +#define RF_AGCREF_LEVEL_MINUS103 0x17 +#define RF_AGCREF_LEVEL_MINUS104 0x18 +#define RF_AGCREF_LEVEL_MINUS105 0x19 +#define RF_AGCREF_LEVEL_MINUS106 0x1A +#define RF_AGCREF_LEVEL_MINUS107 0x1B +#define RF_AGCREF_LEVEL_MINUS108 0x1C +#define RF_AGCREF_LEVEL_MINUS109 0x1D +#define RF_AGCREF_LEVEL_MINUS110 0x1E +#define RF_AGCREF_LEVEL_MINUS111 0x1F +#define RF_AGCREF_LEVEL_MINUS112 0x20 +#define RF_AGCREF_LEVEL_MINUS113 0x21 +#define RF_AGCREF_LEVEL_MINUS114 0x22 +#define RF_AGCREF_LEVEL_MINUS115 0x23 +#define RF_AGCREF_LEVEL_MINUS116 0x24 +#define RF_AGCREF_LEVEL_MINUS117 0x25 +#define RF_AGCREF_LEVEL_MINUS118 0x26 +#define RF_AGCREF_LEVEL_MINUS119 0x27 +#define RF_AGCREF_LEVEL_MINUS120 0x28 +#define RF_AGCREF_LEVEL_MINUS121 0x29 +#define RF_AGCREF_LEVEL_MINUS122 0x2A +#define RF_AGCREF_LEVEL_MINUS123 0x2B +#define RF_AGCREF_LEVEL_MINUS124 0x2C +#define RF_AGCREF_LEVEL_MINUS125 0x2D +#define RF_AGCREF_LEVEL_MINUS126 0x2E +#define RF_AGCREF_LEVEL_MINUS127 0x2F +#define RF_AGCREF_LEVEL_MINUS128 0x30 +#define RF_AGCREF_LEVEL_MINUS129 0x31 +#define RF_AGCREF_LEVEL_MINUS130 0x32 +#define RF_AGCREF_LEVEL_MINUS131 0x33 +#define RF_AGCREF_LEVEL_MINUS132 0x34 +#define RF_AGCREF_LEVEL_MINUS133 0x35 +#define RF_AGCREF_LEVEL_MINUS134 0x36 +#define RF_AGCREF_LEVEL_MINUS135 0x37 +#define RF_AGCREF_LEVEL_MINUS136 0x38 +#define RF_AGCREF_LEVEL_MINUS137 0x39 +#define RF_AGCREF_LEVEL_MINUS138 0x3A +#define RF_AGCREF_LEVEL_MINUS139 0x3B +#define RF_AGCREF_LEVEL_MINUS140 0x3C +#define RF_AGCREF_LEVEL_MINUS141 0x3D +#define RF_AGCREF_LEVEL_MINUS142 0x3E +#define RF_AGCREF_LEVEL_MINUS143 0x3F + + +// RegAgcThresh1 +#define RF_AGCTHRESH1_SNRMARGIN_000 0x00 +#define RF_AGCTHRESH1_SNRMARGIN_001 0x20 +#define RF_AGCTHRESH1_SNRMARGIN_010 0x40 +#define RF_AGCTHRESH1_SNRMARGIN_011 0x60 +#define RF_AGCTHRESH1_SNRMARGIN_100 0x80 +#define RF_AGCTHRESH1_SNRMARGIN_101 0xA0 // Default +#define RF_AGCTHRESH1_SNRMARGIN_110 0xC0 +#define RF_AGCTHRESH1_SNRMARGIN_111 0xE0 + +#define RF_AGCTHRESH1_STEP1_0 0x00 +#define RF_AGCTHRESH1_STEP1_1 0x01 +#define RF_AGCTHRESH1_STEP1_2 0x02 +#define RF_AGCTHRESH1_STEP1_3 0x03 +#define RF_AGCTHRESH1_STEP1_4 0x04 +#define RF_AGCTHRESH1_STEP1_5 0x05 +#define RF_AGCTHRESH1_STEP1_6 0x06 +#define RF_AGCTHRESH1_STEP1_7 0x07 +#define RF_AGCTHRESH1_STEP1_8 0x08 +#define RF_AGCTHRESH1_STEP1_9 0x09 +#define RF_AGCTHRESH1_STEP1_10 0x0A +#define RF_AGCTHRESH1_STEP1_11 0x0B +#define RF_AGCTHRESH1_STEP1_12 0x0C +#define RF_AGCTHRESH1_STEP1_13 0x0D +#define RF_AGCTHRESH1_STEP1_14 0x0E +#define RF_AGCTHRESH1_STEP1_15 0x0F +#define RF_AGCTHRESH1_STEP1_16 0x10 // Default +#define RF_AGCTHRESH1_STEP1_17 0x11 +#define RF_AGCTHRESH1_STEP1_18 0x12 +#define RF_AGCTHRESH1_STEP1_19 0x13 +#define RF_AGCTHRESH1_STEP1_20 0x14 +#define RF_AGCTHRESH1_STEP1_21 0x15 +#define RF_AGCTHRESH1_STEP1_22 0x16 +#define RF_AGCTHRESH1_STEP1_23 0x17 +#define RF_AGCTHRESH1_STEP1_24 0x18 +#define RF_AGCTHRESH1_STEP1_25 0x19 +#define RF_AGCTHRESH1_STEP1_26 0x1A +#define RF_AGCTHRESH1_STEP1_27 0x1B +#define RF_AGCTHRESH1_STEP1_28 0x1C +#define RF_AGCTHRESH1_STEP1_29 0x1D +#define RF_AGCTHRESH1_STEP1_30 0x1E +#define RF_AGCTHRESH1_STEP1_31 0x1F + + +// RegAgcThresh2 +#define RF_AGCTHRESH2_STEP2_0 0x00 +#define RF_AGCTHRESH2_STEP2_1 0x10 +#define RF_AGCTHRESH2_STEP2_2 0x20 +#define RF_AGCTHRESH2_STEP2_3 0x30 // XXX wrong -- Default +#define RF_AGCTHRESH2_STEP2_4 0x40 +#define RF_AGCTHRESH2_STEP2_5 0x50 +#define RF_AGCTHRESH2_STEP2_6 0x60 +#define RF_AGCTHRESH2_STEP2_7 0x70 // default +#define RF_AGCTHRESH2_STEP2_8 0x80 +#define RF_AGCTHRESH2_STEP2_9 0x90 +#define RF_AGCTHRESH2_STEP2_10 0xA0 +#define RF_AGCTHRESH2_STEP2_11 0xB0 +#define RF_AGCTHRESH2_STEP2_12 0xC0 +#define RF_AGCTHRESH2_STEP2_13 0xD0 +#define RF_AGCTHRESH2_STEP2_14 0xE0 +#define RF_AGCTHRESH2_STEP2_15 0xF0 + +#define RF_AGCTHRESH2_STEP3_0 0x00 +#define RF_AGCTHRESH2_STEP3_1 0x01 +#define RF_AGCTHRESH2_STEP3_2 0x02 +#define RF_AGCTHRESH2_STEP3_3 0x03 +#define RF_AGCTHRESH2_STEP3_4 0x04 +#define RF_AGCTHRESH2_STEP3_5 0x05 +#define RF_AGCTHRESH2_STEP3_6 0x06 +#define RF_AGCTHRESH2_STEP3_7 0x07 +#define RF_AGCTHRESH2_STEP3_8 0x08 +#define RF_AGCTHRESH2_STEP3_9 0x09 +#define RF_AGCTHRESH2_STEP3_10 0x0A +#define RF_AGCTHRESH2_STEP3_11 0x0B // Default +#define RF_AGCTHRESH2_STEP3_12 0x0C +#define RF_AGCTHRESH2_STEP3_13 0x0D +#define RF_AGCTHRESH2_STEP3_14 0x0E +#define RF_AGCTHRESH2_STEP3_15 0x0F + + +// RegAgcThresh3 +#define RF_AGCTHRESH3_STEP4_0 0x00 +#define RF_AGCTHRESH3_STEP4_1 0x10 +#define RF_AGCTHRESH3_STEP4_2 0x20 +#define RF_AGCTHRESH3_STEP4_3 0x30 +#define RF_AGCTHRESH3_STEP4_4 0x40 +#define RF_AGCTHRESH3_STEP4_5 0x50 +#define RF_AGCTHRESH3_STEP4_6 0x60 +#define RF_AGCTHRESH3_STEP4_7 0x70 +#define RF_AGCTHRESH3_STEP4_8 0x80 +#define RF_AGCTHRESH3_STEP4_9 0x90 // Default +#define RF_AGCTHRESH3_STEP4_10 0xA0 +#define RF_AGCTHRESH3_STEP4_11 0xB0 +#define RF_AGCTHRESH3_STEP4_12 0xC0 +#define RF_AGCTHRESH3_STEP4_13 0xD0 +#define RF_AGCTHRESH3_STEP4_14 0xE0 +#define RF_AGCTHRESH3_STEP4_15 0xF0 + +#define RF_AGCTHRESH3_STEP5_0 0x00 +#define RF_AGCTHRESH3_STEP5_1 0x01 +#define RF_AGCTHRESH3_STEP5_2 0x02 +#define RF_AGCTHRESH3_STEP5_3 0x03 +#define RF_AGCTHRESH3_STEP5_4 0x04 +#define RF_AGCTHRESH3_STEP5_5 0x05 +#define RF_AGCTHRESH3_STEP5_6 0x06 +#define RF_AGCTHRESH3_STEP5_7 0x07 +#define RF_AGCTHRES33_STEP5_8 0x08 +#define RF_AGCTHRESH3_STEP5_9 0x09 +#define RF_AGCTHRESH3_STEP5_10 0x0A +#define RF_AGCTHRESH3_STEP5_11 0x0B // Default +#define RF_AGCTHRESH3_STEP5_12 0x0C +#define RF_AGCTHRESH3_STEP5_13 0x0D +#define RF_AGCTHRESH3_STEP5_14 0x0E +#define RF_AGCTHRESH3_STEP5_15 0x0F + + +// RegLna +#define RF_LNA_ZIN_50 0x00 +#define RF_LNA_ZIN_200 0x80 // Default + +#define RF_LNA_LOWPOWER_OFF 0x00 // Default +#define RF_LNA_LOWPOWER_ON 0x40 + +#define RF_LNA_CURRENTGAIN 0x08 + +#define RF_LNA_GAINSELECT_AUTO 0x00 // Default +#define RF_LNA_GAINSELECT_MAX 0x01 +#define RF_LNA_GAINSELECT_MAXMINUS6 0x02 +#define RF_LNA_GAINSELECT_MAXMINUS12 0x03 +#define RF_LNA_GAINSELECT_MAXMINUS24 0x04 +#define RF_LNA_GAINSELECT_MAXMINUS36 0x05 +#define RF_LNA_GAINSELECT_MAXMINUS48 0x06 + + +// RegRxBw +#define RF_RXBW_DCCFREQ_000 0x00 +#define RF_RXBW_DCCFREQ_001 0x20 +#define RF_RXBW_DCCFREQ_010 0x40 // Default +#define RF_RXBW_DCCFREQ_011 0x60 +#define RF_RXBW_DCCFREQ_100 0x80 +#define RF_RXBW_DCCFREQ_101 0xA0 +#define RF_RXBW_DCCFREQ_110 0xC0 +#define RF_RXBW_DCCFREQ_111 0xE0 + +#define RF_RXBW_MANT_16 0x00 +#define RF_RXBW_MANT_20 0x08 +#define RF_RXBW_MANT_24 0x10 // Default + +#define RF_RXBW_EXP_0 0x00 +#define RF_RXBW_EXP_1 0x01 +#define RF_RXBW_EXP_2 0x02 +#define RF_RXBW_EXP_3 0x03 +#define RF_RXBW_EXP_4 0x04 +#define RF_RXBW_EXP_5 0x05 // Default +#define RF_RXBW_EXP_6 0x06 +#define RF_RXBW_EXP_7 0x07 + + +// RegAfcBw +#define RF_AFCBW_DCCFREQAFC_000 0x00 +#define RF_AFCBW_DCCFREQAFC_001 0x20 +#define RF_AFCBW_DCCFREQAFC_010 0x40 +#define RF_AFCBW_DCCFREQAFC_011 0x60 +#define RF_AFCBW_DCCFREQAFC_100 0x80 // Default +#define RF_AFCBW_DCCFREQAFC_101 0xA0 +#define RF_AFCBW_DCCFREQAFC_110 0xC0 +#define RF_AFCBW_DCCFREQAFC_111 0xE0 + +#define RF_AFCBW_MANTAFC_16 0x00 +#define RF_AFCBW_MANTAFC_20 0x08 // Default +#define RF_AFCBW_MANTAFC_24 0x10 + +#define RF_AFCBW_EXPAFC_0 0x00 +#define RF_AFCBW_EXPAFC_1 0x01 +#define RF_AFCBW_EXPAFC_2 0x02 +#define RF_AFCBW_EXPAFC_3 0x03 // Default +#define RF_AFCBW_EXPAFC_4 0x04 +#define RF_AFCBW_EXPAFC_5 0x05 +#define RF_AFCBW_EXPAFC_6 0x06 +#define RF_AFCBW_EXPAFC_7 0x07 + + +// RegOokPeak +#define RF_OOKPEAK_THRESHTYPE_FIXED 0x00 +#define RF_OOKPEAK_THRESHTYPE_PEAK 0x40 // Default +#define RF_OOKPEAK_THRESHTYPE_AVERAGE 0x80 + +#define RF_OOKPEAK_PEAKTHRESHSTEP_000 0x00 // Default +#define RF_OOKPEAK_PEAKTHRESHSTEP_001 0x08 +#define RF_OOKPEAK_PEAKTHRESHSTEP_010 0x10 +#define RF_OOKPEAK_PEAKTHRESHSTEP_011 0x18 +#define RF_OOKPEAK_PEAKTHRESHSTEP_100 0x20 +#define RF_OOKPEAK_PEAKTHRESHSTEP_101 0x28 +#define RF_OOKPEAK_PEAKTHRESHSTEP_110 0x30 +#define RF_OOKPEAK_PEAKTHRESHSTEP_111 0x38 + +#define RF_OOKPEAK_PEAKTHRESHDEC_000 0x00 // Default +#define RF_OOKPEAK_PEAKTHRESHDEC_001 0x01 +#define RF_OOKPEAK_PEAKTHRESHDEC_010 0x02 +#define RF_OOKPEAK_PEAKTHRESHDEC_011 0x03 +#define RF_OOKPEAK_PEAKTHRESHDEC_100 0x04 +#define RF_OOKPEAK_PEAKTHRESHDEC_101 0x05 +#define RF_OOKPEAK_PEAKTHRESHDEC_110 0x06 +#define RF_OOKPEAK_PEAKTHRESHDEC_111 0x07 + + +// RegOokAvg +#define RF_OOKAVG_AVERAGETHRESHFILT_00 0x00 +#define RF_OOKAVG_AVERAGETHRESHFILT_01 0x40 +#define RF_OOKAVG_AVERAGETHRESHFILT_10 0x80 // Default +#define RF_OOKAVG_AVERAGETHRESHFILT_11 0xC0 + + +// RegOokFix +#define RF_OOKFIX_FIXEDTHRESH_VALUE 0x06 // Default + + +// RegAfcFei +#define RF_AFCFEI_FEI_DONE 0x40 +#define RF_AFCFEI_FEI_START 0x20 +#define RF_AFCFEI_AFC_DONE 0x10 +#define RF_AFCFEI_AFCAUTOCLEAR_ON 0x08 +#define RF_AFCFEI_AFCAUTOCLEAR_OFF 0x00 // Default + +#define RF_AFCFEI_AFCAUTO_ON 0x04 +#define RF_AFCFEI_AFCAUTO_OFF 0x00 // Default + +#define RF_AFCFEI_AFC_CLEAR 0x02 +#define RF_AFCFEI_AFC_START 0x01 + +// RegRssiConfig +#define RF_RSSI_FASTRX_ON 0x08 +#define RF_RSSI_FASTRX_OFF 0x00 // Default +#define RF_RSSI_DONE 0x02 +#define RF_RSSI_START 0x01 + + +// RegDioMapping1 +#define RF_DIOMAPPING1_DIO0_00 0x00 // Default +#define RF_DIOMAPPING1_DIO0_01 0x40 +#define RF_DIOMAPPING1_DIO0_10 0x80 +#define RF_DIOMAPPING1_DIO0_11 0xC0 + +#define RF_DIOMAPPING1_DIO1_00 0x00 // Default +#define RF_DIOMAPPING1_DIO1_01 0x10 +#define RF_DIOMAPPING1_DIO1_10 0x20 +#define RF_DIOMAPPING1_DIO1_11 0x30 + +#define RF_DIOMAPPING1_DIO2_00 0x00 // Default +#define RF_DIOMAPPING1_DIO2_01 0x04 +#define RF_DIOMAPPING1_DIO2_10 0x08 +#define RF_DIOMAPPING1_DIO2_11 0x0C + +#define RF_DIOMAPPING1_DIO3_00 0x00 // Default +#define RF_DIOMAPPING1_DIO3_01 0x01 +#define RF_DIOMAPPING1_DIO3_10 0x02 +#define RF_DIOMAPPING1_DIO3_11 0x03 + + +// RegDioMapping2 +#define RF_DIOMAPPING2_DIO4_00 0x00 // Default +#define RF_DIOMAPPING2_DIO4_01 0x40 +#define RF_DIOMAPPING2_DIO4_10 0x80 +#define RF_DIOMAPPING2_DIO4_11 0xC0 + +#define RF_DIOMAPPING2_DIO5_00 0x00 // Default +#define RF_DIOMAPPING2_DIO5_01 0x10 +#define RF_DIOMAPPING2_DIO5_10 0x20 +#define RF_DIOMAPPING2_DIO5_11 0x30 + +#define RF_DIOMAPPING2_CLKOUT_32 0x00 +#define RF_DIOMAPPING2_CLKOUT_16 0x01 +#define RF_DIOMAPPING2_CLKOUT_8 0x02 +#define RF_DIOMAPPING2_CLKOUT_4 0x03 +#define RF_DIOMAPPING2_CLKOUT_2 0x04 +#define RF_DIOMAPPING2_CLKOUT_1 0x05 +#define RF_DIOMAPPING2_CLKOUT_RC 0x06 +#define RF_DIOMAPPING2_CLKOUT_OFF 0x07 // Default + + +// RegIrqFlags1 +#define RF_IRQFLAGS1_MODEREADY 0x80 +#define RF_IRQFLAGS1_RXREADY 0x40 +#define RF_IRQFLAGS1_TXREADY 0x20 +#define RF_IRQFLAGS1_PLLLOCK 0x10 +#define RF_IRQFLAGS1_RSSI 0x08 +#define RF_IRQFLAGS1_TIMEOUT 0x04 +#define RF_IRQFLAGS1_AUTOMODE 0x02 +#define RF_IRQFLAGS1_SYNCADDRESSMATCH 0x01 + +// RegIrqFlags2 +#define RF_IRQFLAGS2_FIFOFULL 0x80 +#define RF_IRQFLAGS2_FIFONOTEMPTY 0x40 +#define RF_IRQFLAGS2_FIFOLEVEL 0x20 +#define RF_IRQFLAGS2_FIFOOVERRUN 0x10 +#define RF_IRQFLAGS2_PACKETSENT 0x08 +#define RF_IRQFLAGS2_PAYLOADREADY 0x04 +#define RF_IRQFLAGS2_CRCOK 0x02 +#define RF_IRQFLAGS2_LOWBAT 0x01 + +// RegRssiThresh +#define RF_RSSITHRESH_VALUE 0xE4 // Default + +// RegRxTimeout1 +#define RF_RXTIMEOUT1_RXSTART_VALUE 0x00 // Default + +// RegRxTimeout2 +#define RF_RXTIMEOUT2_RSSITHRESH_VALUE 0x00 // Default + +// RegPreamble +#define RF_PREAMBLESIZE_MSB_VALUE 0x00 // Default +#define RF_PREAMBLESIZE_LSB_VALUE 0x03 // Default + + +// RegSyncConfig +#define RF_SYNC_ON 0x80 // Default +#define RF_SYNC_OFF 0x00 + +#define RF_SYNC_FIFOFILL_AUTO 0x00 // Default -- when sync interrupt occurs +#define RF_SYNC_FIFOFILL_MANUAL 0x40 + +#define RF_SYNC_SIZE_1 0x00 +#define RF_SYNC_SIZE_2 0x08 +#define RF_SYNC_SIZE_3 0x10 +#define RF_SYNC_SIZE_4 0x18 // Default +#define RF_SYNC_SIZE_5 0x20 +#define RF_SYNC_SIZE_6 0x28 +#define RF_SYNC_SIZE_7 0x30 +#define RF_SYNC_SIZE_8 0x38 + +#define RF_SYNC_TOL_0 0x00 // Default +#define RF_SYNC_TOL_1 0x01 +#define RF_SYNC_TOL_2 0x02 +#define RF_SYNC_TOL_3 0x03 +#define RF_SYNC_TOL_4 0x04 +#define RF_SYNC_TOL_5 0x05 +#define RF_SYNC_TOL_6 0x06 +#define RF_SYNC_TOL_7 0x07 + + +// RegSyncValue1-8 +#define RF_SYNC_BYTE1_VALUE 0x00 // Default +#define RF_SYNC_BYTE2_VALUE 0x00 // Default +#define RF_SYNC_BYTE3_VALUE 0x00 // Default +#define RF_SYNC_BYTE4_VALUE 0x00 // Default +#define RF_SYNC_BYTE5_VALUE 0x00 // Default +#define RF_SYNC_BYTE6_VALUE 0x00 // Default +#define RF_SYNC_BYTE7_VALUE 0x00 // Default +#define RF_SYNC_BYTE8_VALUE 0x00 // Default + + +// RegPacketConfig1 +#define RF_PACKET1_FORMAT_FIXED 0x00 // Default +#define RF_PACKET1_FORMAT_VARIABLE 0x80 + +#define RF_PACKET1_DCFREE_OFF 0x00 // Default +#define RF_PACKET1_DCFREE_MANCHESTER 0x20 +#define RF_PACKET1_DCFREE_WHITENING 0x40 + +#define RF_PACKET1_CRC_ON 0x10 // Default +#define RF_PACKET1_CRC_OFF 0x00 + +#define RF_PACKET1_CRCAUTOCLEAR_ON 0x00 // Default +#define RF_PACKET1_CRCAUTOCLEAR_OFF 0x08 + +#define RF_PACKET1_ADRSFILTERING_OFF 0x00 // Default +#define RF_PACKET1_ADRSFILTERING_NODE 0x02 +#define RF_PACKET1_ADRSFILTERING_NODEBROADCAST 0x04 + + +// RegPayloadLength +#define RF_PAYLOADLENGTH_VALUE 0x40 // Default + +// RegBroadcastAdrs +#define RF_BROADCASTADDRESS_VALUE 0x00 + + +// RegAutoModes +#define RF_AUTOMODES_ENTER_OFF 0x00 // Default +#define RF_AUTOMODES_ENTER_FIFONOTEMPTY 0x20 +#define RF_AUTOMODES_ENTER_FIFOLEVEL 0x40 +#define RF_AUTOMODES_ENTER_CRCOK 0x60 +#define RF_AUTOMODES_ENTER_PAYLOADREADY 0x80 +#define RF_AUTOMODES_ENTER_SYNCADRSMATCH 0xA0 +#define RF_AUTOMODES_ENTER_PACKETSENT 0xC0 +#define RF_AUTOMODES_ENTER_FIFOEMPTY 0xE0 + +#define RF_AUTOMODES_EXIT_OFF 0x00 // Default +#define RF_AUTOMODES_EXIT_FIFOEMPTY 0x04 +#define RF_AUTOMODES_EXIT_FIFOLEVEL 0x08 +#define RF_AUTOMODES_EXIT_CRCOK 0x0C +#define RF_AUTOMODES_EXIT_PAYLOADREADY 0x10 +#define RF_AUTOMODES_EXIT_SYNCADRSMATCH 0x14 +#define RF_AUTOMODES_EXIT_PACKETSENT 0x18 +#define RF_AUTOMODES_EXIT_RXTIMEOUT 0x1C + +#define RF_AUTOMODES_INTERMEDIATE_SLEEP 0x00 // Default +#define RF_AUTOMODES_INTERMEDIATE_STANDBY 0x01 +#define RF_AUTOMODES_INTERMEDIATE_RECEIVER 0x02 +#define RF_AUTOMODES_INTERMEDIATE_TRANSMITTER 0x03 + + +// RegFifoThresh +#define RF_FIFOTHRESH_TXSTART_FIFOTHRESH 0x00 +#define RF_FIFOTHRESH_TXSTART_FIFONOTEMPTY 0x80 // Default + +#define RF_FIFOTHRESH_VALUE 0x0F // Default + + +// RegPacketConfig2 +#define RF_PACKET2_RXRESTARTDELAY_1BIT 0x00 // Default +#define RF_PACKET2_RXRESTARTDELAY_2BITS 0x10 +#define RF_PACKET2_RXRESTARTDELAY_4BITS 0x20 +#define RF_PACKET2_RXRESTARTDELAY_8BITS 0x30 +#define RF_PACKET2_RXRESTARTDELAY_16BITS 0x40 +#define RF_PACKET2_RXRESTARTDELAY_32BITS 0x50 +#define RF_PACKET2_RXRESTARTDELAY_64BITS 0x60 +#define RF_PACKET2_RXRESTARTDELAY_128BITS 0x70 +#define RF_PACKET2_RXRESTARTDELAY_256BITS 0x80 +#define RF_PACKET2_RXRESTARTDELAY_512BITS 0x90 +#define RF_PACKET2_RXRESTARTDELAY_1024BITS 0xA0 +#define RF_PACKET2_RXRESTARTDELAY_2048BITS 0xB0 +#define RF_PACKET2_RXRESTARTDELAY_NONE 0xC0 +#define RF_PACKET2_RXRESTART 0x04 + +#define RF_PACKET2_AUTORXRESTART_ON 0x02 // Default +#define RF_PACKET2_AUTORXRESTART_OFF 0x00 + +#define RF_PACKET2_AES_ON 0x01 +#define RF_PACKET2_AES_OFF 0x00 // Default + + +// RegAesKey1-16 +#define RF_AESKEY1_VALUE 0x00 // Default +#define RF_AESKEY2_VALUE 0x00 // Default +#define RF_AESKEY3_VALUE 0x00 // Default +#define RF_AESKEY4_VALUE 0x00 // Default +#define RF_AESKEY5_VALUE 0x00 // Default +#define RF_AESKEY6_VALUE 0x00 // Default +#define RF_AESKEY7_VALUE 0x00 // Default +#define RF_AESKEY8_VALUE 0x00 // Default +#define RF_AESKEY9_VALUE 0x00 // Default +#define RF_AESKEY10_VALUE 0x00 // Default +#define RF_AESKEY11_VALUE 0x00 // Default +#define RF_AESKEY12_VALUE 0x00 // Default +#define RF_AESKEY13_VALUE 0x00 // Default +#define RF_AESKEY14_VALUE 0x00 // Default +#define RF_AESKEY15_VALUE 0x00 // Default +#define RF_AESKEY16_VALUE 0x00 // Default + + +// RegTemp1 +#define RF_TEMP1_MEAS_START 0x08 +#define RF_TEMP1_MEAS_RUNNING 0x04 +#define RF_TEMP1_ADCLOWPOWER_ON 0x01 // Default +#define RF_TEMP1_ADCLOWPOWER_OFF 0x00 + +// RegTestDagc 0x6F: demodulator config and IO mode config +#define RF_DAGC_NORMAL 0x00 // Reset value +#define RF_DAGC_IMPROVED_LOWBETA1 0x20 // +#define RF_DAGC_IMPROVED_LOWBETA0 0x30 // Recommended default +