From 616b7d8b09e83aacf8821814765576204d85eaa7 Mon Sep 17 00:00:00 2001
From: "Bruce B. Lacey" <bruce@blacey.com>
Date: Sat, 11 Jul 2015 09:09:14 -0700
Subject: [PATCH 1/2] Changed the extended_fuses from 0xFE to 0x06 (set unused
 bits 3-7 to 0 instead of F) to improve compatibility with a broader range of
 programmers (e.g. ATMEL Dragon and USBTiny ISP v3).

---
 hardware/MySensors/avr/boards.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/hardware/MySensors/avr/boards.txt b/hardware/MySensors/avr/boards.txt
index 2a3c638..7fc0ec8 100644
--- a/hardware/MySensors/avr/boards.txt
+++ b/hardware/MySensors/avr/boards.txt
@@ -16,7 +16,7 @@ MysensorsMicro.bootloader.unlock_bits=0x3F
 MysensorsMicro.bootloader.lock_bits=0x0F
 MysensorsMicro.bootloader.low_fuses=0xE2
 MysensorsMicro.bootloader.high_fuses=0xD2
-MysensorsMicro.bootloader.extended_fuses=0xFE
+MysensorsMicro.bootloader.extended_fuses=0x06
 MysensorsMicro.bootloader.file=DualOptiboot/optiboot_atmega328_pro_8MHz.hex
 
 MysensorsMicro.build.board=AVR_MICRO8

From 4abaa6ded34d22e3f3dd98d33d3d12450a537706 Mon Sep 17 00:00:00 2001
From: "Bruce B. Lacey" <bruce@blacey.com>
Date: Sat, 11 Jul 2015 09:31:30 -0700
Subject: [PATCH 2/2] Changed WITH_LEDS_BLINKING option to use the default LED
 pins as described on http://www.mysensors.org/build/advanced_gateway for
 consistency and backwards compatibility.  Also corrected the LED on/off state
 to HIGH/LOW from LOW/HIGH respectively.

---
 libraries/MySensors/MyConfig.h   |  6 +++---
 libraries/MySensors/MySensor.cpp | 18 +++++++++---------
 2 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/libraries/MySensors/MyConfig.h b/libraries/MySensors/MyConfig.h
index c2148ab..11c8af1 100644
--- a/libraries/MySensors/MyConfig.h
+++ b/libraries/MySensors/MyConfig.h
@@ -58,11 +58,11 @@
 // default LEDs blinking period in milliseconds
 #define DEFAULT_LED_BLINK_PERIOD 300
 // The RX LED default pin
-#define DEFAULT_RX_LED_PIN 8
+#define DEFAULT_RX_LED_PIN 6
 // The TX LED default pin
-#define DEFAULT_TX_LED_PIN 9
+#define DEFAULT_TX_LED_PIN 5
 // The Error LED default pin
-#define DEFAULT_ERR_LED_PIN 7
+#define DEFAULT_ERR_LED_PIN 4
 
 
 /**********************************
diff --git a/libraries/MySensors/MySensor.cpp b/libraries/MySensors/MySensor.cpp
index 2e2d70e..c32e44b 100644
--- a/libraries/MySensors/MySensor.cpp
+++ b/libraries/MySensors/MySensor.cpp
@@ -110,33 +110,33 @@ void MySensor::handleLedsBlinking() {
 	// do the actual blinking
 	if(countRx && countRx != 255) {
 		// switch led on
-		digitalWrite(pinRx, LOW);
+		digitalWrite(pinRx, HIGH);
 	}
 	else if(!countRx) {
 		// switching off
-		digitalWrite(pinRx, HIGH);
+		digitalWrite(pinRx, LOW);
 	}
 	if(countRx != 255)
 		--countRx;
 
 	if(countTx && countTx != 255) {
 		// switch led on
-		digitalWrite(pinTx, LOW);
+		digitalWrite(pinTx, HIGH);
 	}
 	else if(!countTx) {
 		// switching off
-		digitalWrite(pinTx, HIGH);
+		digitalWrite(pinTx, LOW);
 	}
 	if(countTx != 255)
 		--countTx;
 
 	if(countErr && countErr != 255) {
 		// switch led on
-		digitalWrite(pinEr, LOW);
+		digitalWrite(pinEr, HIGH);
 	}
 	else if(!countErr) {
 		// switching off
-		digitalWrite(pinEr, HIGH);
+		digitalWrite(pinEr, LOW);
 	}
 	if(countErr != 255)
 		--countErr;
@@ -182,9 +182,9 @@ void MySensor::begin(void (*_msgCallback)(const MyMessage &), uint8_t _nodeId, b
 	pinMode(pinEr, OUTPUT);
 
 	// Set initial state of leds
-	digitalWrite(pinRx, HIGH);
-	digitalWrite(pinTx, HIGH);
-	digitalWrite(pinEr, HIGH);
+	digitalWrite(pinRx, LOW);
+	digitalWrite(pinTx, LOW);
+	digitalWrite(pinEr, LOW);
 
 	// initialize counters
 	countRx = 0;