ATTiny support fr jscrane fork tested and working

ATTiny support pulled in from https://github.com/jscrane/RF24
- SPI support for ATTiny is included with the library. Do NOT include
SPI.h with tiny.

Pin info etc can be found at:
http://programmablehardware.blogspot.ca/2013/09/rf24-with-attiny84.html

ATTiny 85 Example:
RF24 radio(4,3);    // CE: 4  CS: 3

RF24.cpp

@@ -380,7 +380,7 @@ uint8_t RF24::getPayloadSize(void)
 
 /****************************************************************************/
 
-#if !defined (MINIMAL)
+
 
 static const char rf24_datarate_e_str_0[] PROGMEM = "1MBPS";
 static const char rf24_datarate_e_str_1[] PROGMEM = "2MBPS";
@@ -414,7 +414,7 @@ static const char * const rf24_pa_dbm_e_str_P[] PROGMEM = {
   rf24_pa_dbm_e_str_2,
   rf24_pa_dbm_e_str_3,
 };
-
+#if !defined (MINIMAL)
 void RF24::printDetails(void)
 {
   print_status(get_status());
@@ -1210,50 +1210,51 @@ void RF24::setRetries(uint8_t delay, uint8_t count)
 }
 
 
+//ATTiny support code pulled in from https://github.com/jscrane/RF24
 
-
+#if defined(__AVR_ATtiny25__) || defined(__AVR_ATtiny45__) || defined(__AVR_ATtiny85__)
-
+// see http://gammon.com.au/spi
-
+#	define DI   0  // D0, pin 5  Data In
-#if defined (ATTINY)
+#	define DO   1  // D1, pin 6  Data Out (this is *not* MOSI)
-
+#	define USCK 2  // D2, pin 7  Universal Serial Interface clock
-#include "pins_arduino.h"
+#	define SS   3  // D3, pin 2  Slave Select
-
+#elif defined(__AVR_ATtiny24__) || defined(__AVR_ATtiny44__) || defined(__AVR_ATtiny84__)
-#if defined( __AVR_ATtiny85__ )
+// these depend on the core used (check pins_arduino.h)
-const static uint8_t _CS = PB4;
+// this is for jeelabs' one (based on google-code core)
-const static uint8_t _MOSI = PB1;
+#	define DI   4   // PA6
-const static uint8_t _MISO = PB0;
+#	define DO   5   // PA5
-const static uint8_t _SCK  = PB2;
+#	define USCK 6   // PA4
+#	define SS   3   // PA7
 #endif
 
-#if defined( __AVR_ATtiny84__ )
+#if defined(__AVR_ATtiny25__) || defined(__AVR_ATtiny45__) || defined(__AVR_ATtiny85__) || defined(__AVR_ATtiny24__) || defined(__AVR_ATtiny44__) || defined(__AVR_ATtiny84__)
-const static uint8_t _CS   = 3;
-const static uint8_t _MOSI = 5;
-const static uint8_t _MISO = 4;
-const static uint8_t _SCK  = 6;
-#endif
-
-SPIClass SPI;
 
 void SPIClass::begin() {
 
-  pinMode(_SCK, OUTPUT);
+  digitalWrite(SS, HIGH);
-  pinMode(_MOSI, OUTPUT);
+  pinMode(USCK, OUTPUT);
-  pinMode(_MISO,INPUT);
+  pinMode(DO, OUTPUT);
+  pinMode(SS, OUTPUT);
+  pinMode(DI, INPUT);
+  USICR = _BV(USIWM0);
 
-  digitalWrite(_MISO,HIGH);
-  digitalWrite(_SCK, LOW);
-  digitalWrite(_MOSI, LOW);
 }
 
-void SPIClass::end() {
+byte SPIClass::transfer(byte b) {
+
+  USIDR = b;
+  USISR = _BV(USIOIF);
+  do
+    USICR = _BV(USIWM0) | _BV(USICS1) | _BV(USICLK) | _BV(USITC);
+  while ((USISR & _BV(USIOIF)) == 0);
+  return USIDR;
 
-  pinMode(_SCK, INPUT);
-  pinMode(_MOSI, INPUT);
-  pinMode(_MISO,INPUT);
 }
 
-void SPIClass::setDataMode(byte mode){}
+void SPIClass::end() {}
-void SPIClass::setClockDivider(byte rate){}
+void SPIClass::setDataMode(uint8_t mode){}
+void SPIClass::setBitOrder(uint8_t bitOrder){}
+void SPIClass::setClockDivider(uint8_t rate){}
+
 
 #endif
-

RF24.h

@@ -948,7 +948,7 @@ private:
  */
 
 /**
- * @example pingpair_dyn.pde
+ * @example pingpair_dyn.ino
  *
  * This is an example of how to use payloads of a varying (dynamic) size.
  */
@@ -1018,7 +1018,7 @@ private:
  * - Extended timeout periods have been added to aid in noisy or otherwise unreliable environments
  * - Delays have been removed where possible to ensure maximum efficiency
  * - Full Due support with extended SPI functions
- * - Initial ATTiny support added (Untested)
+ * - ATTiny 24/44/84 25/45/85 now supported.
  * - More! See the links below and class documentation for more info.
  *
  * If issues are discovered with the documentation, please report them here: <a href="https://github.com/TMRh20/tmrh20.github.io/issues"> here</a>
@@ -1042,8 +1042,11 @@ private:
  * - ATMega 328 based boards (Uno, Nano, etc)
  * - Mega Boards (1280, 2560, etc)
  * - ARM based boards (Arduino Due)  Note: Do not include printf.h or use printf begin. This functionality is already present. Must use one of the
- * 	hardware SS/CSN pins.
+ * 	hardware SS/CSN pins as extended SPI methods are used.
- * - ATTiny boards (Not fully tested) Note: Do not include SPI.h. The SPI functions for ATTiny are already included.
+ *  Initial Due support taken from https://github.com/mcrosson/RF24/tree/due
+ * - ATTiny board support added from https://github.com/jscrane/RF24
+ * Note: ATTiny support is built into the library. Do not include SPI.h.
+ * See <a href="http://programmablehardware.blogspot.ca/2013/09/rf24-with-attiny84.html">here </a>for wiring/pin info.
  *
  * @section More More Information
  *

RF24_config.h

@@ -24,8 +24,15 @@
   //#define MINIMAL
 
   // Define _BV for non-Arduino platforms and for Arduino DUE
-
+#if defined (ARDUINO)
-
+	#include <SPI.h>
+#else
+	#include <stdint.h>
+	#include <stdio.h>
+	#include <string.h>
+	extern HardwareSPI SPI;
+	#define _BV(x) (1<<(x))
+  #endif
 
 
   #undef SERIAL_DEBUG
@@ -33,6 +40,9 @@
 	#define IF_SERIAL_DEBUG(x) ({x;})
   #else
 	#define IF_SERIAL_DEBUG(x)
+	#if defined(__AVR_ATtiny84__) || defined(__AVR_ATtiny85__)
+	#define printf_P(...)
+    #endif
   #endif
 
 // Avoid spurious warnings
@@ -68,24 +78,13 @@ typedef char const char;
 #endif
 
 
-// Define _BV for non-Arduino platforms and for Arduino DUE
-#if ! defined(ARDUINO) || (defined(ARDUINO) && defined(__arm__))
-#define _BV(x) (1<<(x))
-#endif
-  // Stuff that is normally provided by Arduino
-  #if !defined (ARDUINO)
 
-	#include <stdint.h>
+// ATTiny support code is from https://github.com/jscrane/RF24
+
+#if defined(__AVR_ATtiny25__) || defined(__AVR_ATtiny45__) || defined(__AVR_ATtiny85__) || defined(__AVR_ATtiny24__) || defined(__AVR_ATtiny44__) || defined(__AVR_ATtiny84__)
 #include <stdio.h>
-	#include <string.h>
+#include <Arduino.h>
-	extern HardwareSPI SPI;
+#include <avr/pgmspace.h>
-	#define _BV(x) (1<<(x))
-  #else
-
-    #if !defined( __AVR_ATtiny85__ ) || defined( __AVR_ATtiny84__)
-	  #include <SPI.h>
-    #else
-	  #define ATTINY
 
 #define SPI_CLOCK_DIV4 0x00
 #define SPI_CLOCK_DIV16 0x01
@@ -109,31 +108,22 @@ typedef char const char;
 
 class SPIClass {
 public:
-	    inline static byte transfer(byte _data);
+  static byte transfer(byte _data);
+
+  // SPI Configuration methods
+
+  inline static void attachInterrupt();
+  inline static void detachInterrupt(); // Default
 
   static void begin(); // Default
   static void end();
 
-	    static void setDataMode(byte);
+  static void setBitOrder(uint8_t);
-	    static void setClockDivider(byte);
+  static void setDataMode(uint8_t);
-	    static void setBitOrder(byte);
+  static void setClockDivider(uint8_t);
 };
-
 extern SPIClass SPI;
 
-	  byte SPIClass::transfer(byte _data){
+#endif //ATTiny
-
-	  	USIDR = _data;
-	  	USISR = _BV(USIOIF);
-
-		while((USISR & _BV(USIOIF)) == 0){
-	    	USICR = _BV(USIWM0) | _BV(USICS1) | _BV(USICLK) | _BV(USITC);
-	  	}
-	  	return USIDR;
-	  }
-    #endif //ATTINY
-
-  #endif //Defined Arduino
-
 #endif // __RF24_CONFIG_H__