MySmartHome/MySensors
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Fixes LED issues as discussed in #562

Browse Source 
Removing MY_LED_BLINKING_FEATURE, as we now are
using MY_DEFAULT_LED_xx_PIN defines to enable
LED blinking feature.

updated Gateway sketches to not refer to
MY_LED_BLINKING_FEATURE any more

fixes #562
This commit is contained in:
Thomas Mørch
2016-08-20 09:35:49 +02:00
parent c925dd6f5e
commit 15b46f8023
15 changed files with 216 additions and 276 deletions
Download Patch File Download Diff File Expand all files Collapse all files
MyConfig.h
+12 -15
View File
@@ -223,25 +223,22 @@
/**********************************
* Information LEDs blinking
***********************************/
// This feature enables LEDs blinking on message receive, transmit
// or if some error occurred. This was commonly used only in gateways,
// but now can be used in any sensor node. Also the LEDs can now be
// disabled in the gateway.
// If one of the following is defined here, or in the sketch, the pin will be used for the
// corresponding led function.
// They have to be enabled here (or in your sketch). Replace x with the pin number you have the LED on.
//
// NOTE!! that on some platforms (for example sensebender GW) the hardware variant can enable LEDs by default,
// These defaults can be overridden by defining one of these.
//#define MY_DEFAULT_ERR_LED_PIN x
//#define MY_DEFAULT_TX_LED_PIN x
//#define MY_DEFAULT_RX_LED_PIN x
//#define MY_LEDS_BLINKING_FEATURE
// The following setting allows you to inverse the blinking feature MY_LEDS_BLINKING_FEATURE
// The following setting allows you to inverse the LED blinking
// When MY_WITH_LEDS_BLINKING_INVERSE is enabled LEDSs are normally turned on and switches
// off when blinking
//#define MY_WITH_LEDS_BLINKING_INVERSE
// The following defines can be used to set the port pin, that the LED is connected to
// If one of the following is defined here, or in the sketch, MY_LEDS_BLINKING_FEATURE will be
// enabled by default. (Replace x with the pin number you have the LED on)
//#define MY_DEFAULT_ERR_LED_PIN x
//#define MY_DEFAULT_TX_LED_PIN x
//#define MY_DEFAULT_RX_LED_PIN x
/**********************************************
* Gateway inclusion button/mode configuration
@@ -431,7 +428,7 @@
/**
* @def MY_RX_MESSAGE_BUFFER_FEATURE
* @brief This enabled the receiving buffer feature.
* @brief This enabled the receiving buffer feature.
*
* This feature is currently not supported for RFM69 and RS485, for RF24 MY_RF24_IRQ_PIN has to be defined.
*/
@@ -439,7 +436,7 @@
/**
* @def MY_RX_MESSAGE_BUFFER_SIZE
* @brief Declare the amount of incoming messages that can be buffered.
* @brief Declare the amount of incoming messages that can be buffered.
*/
#ifdef MY_RX_MESSAGE_BUFFER_FEATURE
#ifndef MY_RX_MESSAGE_BUFFER_SIZE