diff --git a/libraries/MySensors/Config.h b/libraries/MySensors/Config.h
new file mode 100644
index 0000000..3f7e97f
--- /dev/null
+++ b/libraries/MySensors/Config.h
@@ -0,0 +1,17 @@
+#ifndef Config_h
+#define Config_h
+
+/***
+ * Configure Sensor Network
+ */
+#define RF24_CHANNEL	   76             //RF channel for the sensor net, 0-127
+#define RF24_DATARATE 	   RF24_2MBPS     //RF24_250KBPS for 250kbs, RF24_1MBPS for 1Mbps, or RF24_2MBPS for 2Mbps
+#define RF24_PA_LEVEL 	   RF24_PA_MAX    //Senor PA Level == RF24_PA_MIN=-18dBm, RF24_PA_LOW=-12dBm, RF24_PA_HIGH=-6dBM, and RF24_PA_HIGH=0dBm
+#define RF24_PA_LEVEL_GW   RF24_PA_LEVEL  //Gateway PA Level, defaults to Sensor net PA Level.  Tune here if using an amplified nRF2401+ in your gateway.
+
+/***
+ * Enable/Disable debug logging
+ */
+//#define DEBUG
+
+#endif
diff --git a/libraries/MySensors/Gateway.h b/libraries/MySensors/Gateway.h
index 16aba64..261389c 100644
--- a/libraries/MySensors/Gateway.h
+++ b/libraries/MySensors/Gateway.h
@@ -40,7 +40,7 @@ class Gateway : public Relay
 		Gateway(uint8_t _cepin, uint8_t _cspin, uint8_t _inclusion_time, uint8_t _inclusion_pin, uint8_t _rx, uint8_t _tx, uint8_t _er);
 
 		/* Use this and pass a function that should be called when you want to process commands that arrive from radio network */
-		void begin(rf24_pa_dbm_e paLevel=RF24_PA_MAX, uint8_t channel=76, rf24_datarate_e dataRate=RF24_2MBPS, void (*dataCallback)(char *)=NULL);
+		void begin(rf24_pa_dbm_e paLevel=RF24_PA_LEVEL_GW, uint8_t channel=RF24_CHANNEL, rf24_datarate_e dataRate=RF24_DATARATE, void (*dataCallback)(char *)=NULL);
 
 		void processRadioMessage();
 	    void parseAndSend(char *inputString);
diff --git a/libraries/MySensors/Relay.h b/libraries/MySensors/Relay.h
index 65e8f10..a7811a1 100644
--- a/libraries/MySensors/Relay.h
+++ b/libraries/MySensors/Relay.h
@@ -39,7 +39,7 @@ class Relay : public Sensor
 		*/
 		Relay(uint8_t _cepin = 9, uint8_t _cspin = 10);
 
-		void begin(uint8_t radioId=AUTO, rf24_pa_dbm_e paLevel=RF24_PA_MAX, uint8_t channel=76, rf24_datarate_e dataRate=RF24_2MBPS);
+		void begin(uint8_t radioId=AUTO, rf24_pa_dbm_e paLevel=RF24_PA_LEVEL, uint8_t channel=RF24_CHANNEL, rf24_datarate_e dataRate=RF24_DATARATE);
 		boolean messageAvailable();
 		boolean send(message_s message, int length);
 
diff --git a/libraries/MySensors/Sensor.h b/libraries/MySensors/Sensor.h
index b8cc4a4..e4ba419 100644
--- a/libraries/MySensors/Sensor.h
+++ b/libraries/MySensors/Sensor.h
@@ -12,6 +12,7 @@
 #ifndef Sensor_h
 #define Sensor_h
 
+#include "Config.h"
 #include <nRF24L01.h>
 #include <RF24.h>
 #include <RF24_config.h>
@@ -22,8 +23,6 @@
 #include <avr/pgmspace.h>
 #include <stdarg.h>
 
-#define DEBUG
-
 #ifdef DEBUG
 #define debug(x,...) debugPrint(x, ##__VA_ARGS__)
 #else
@@ -137,7 +136,7 @@ class Sensor : public RF24
 	* @param channel Radio channel. Default is channel 76
 	* @param dataRate Radio transmission speed. Default RF24_2MBPS
 	*/
-	void begin(uint8_t radioId=AUTO, rf24_pa_dbm_e paLevel=RF24_PA_MAX, uint8_t channel=76, rf24_datarate_e dataRate=RF24_2MBPS);
+	void begin(uint8_t radioId=AUTO, rf24_pa_dbm_e paLevel=RF24_PA_LEVEL, uint8_t channel=RF24_CHANNEL, rf24_datarate_e dataRate=RF24_DATARATE);
 
 	uint8_t getRadioId();