Update RGB-3D.ino

libraries/MySensors/examples/RGB-3D/RGB-3D.ino

@@ -29,38 +29,37 @@
 #define SN   "RGB Led strip 3D"
 #define SV   "v1"
 
+// Load mysensors library	
+#include <MySensor.h>	
+// Load Serial Peripheral Interface library  
+#include <SPI.h>
 
-    // Load mysensors library	
+// Arduino pin attached to MOSFET Gate pin
-	  #include <MySensor.h>	
+#define RED_PIN 3 	
-    // Load Serial Peripheral Interface library  
+#define GREEN_PIN 5
-    #include <SPI.h>
+#define BLUE_PIN 6
 
-	  // Arduino pin attached to MOSFET Gate pin
+MySensor gw;	
-	  #define RED_PIN 3 	
-    #define GREEN_PIN 5
-    #define BLUE_PIN 6
 
-    MySensor gw;	
+// Define message name and type to send sensor info
+MyMessage RedStatus(RED_PIN, V_DIMMER);		
+MyMessage GreenStatus(GREEN_PIN, V_DIMMER);
+MyMessage BlueStatus(BLUE_PIN, V_DIMMER);
+MyMessage Status(1, V_DIMMER);
+MyMessage rgbShowState(0, V_LIGHT);
     
-    // Define message name and type to send sensor info
+// Serial.print translate sensor id to sensor name
-	  MyMessage RedStatus(RED_PIN, V_DIMMER);		
+char color[][6] = {"","","","RED","","GREEN","BLUE"};	
-    MyMessage GreenStatus(GREEN_PIN, V_DIMMER);
-    MyMessage BlueStatus(BLUE_PIN, V_DIMMER);
-    MyMessage Status(1, V_DIMMER);
-    MyMessage rgbShowState(0, V_LIGHT);
    
-    // Serial.print translate sensor id to sensor name
+// Vars for rgbShow function
-	  char color[][6] = {"","","","RED","","GREEN","BLUE"};	
+int redval = 0;
+int greenval = 0;
+int blueval = 0;
+long time=0;
+int isShow;
      
-    // Vars for rgbShow function
+void setup() 
-    int redval = 0;
+{
-    int greenval = 0;
-    int blueval = 0;
-    long time=0;
-    int isShow;
-     
-    void setup() 
-    {
   // Initializes the sensor node (Callback function for incoming messages, node id, is repeater)
   gw.begin(incomingMessage, 31, true);		
        
@@ -112,12 +111,12 @@
   // Send RGB show state to controler (request ack back: true/false)
   gw.send( rgbShowState.set(isShow), false);
   
-  		if (isShow==1){	Serial.println("RGB show running..."); }
+  if (isShow==1){Serial.println("RGB show running..."); }
   Serial.println("Ready to receive messages...");  
-    }
+}
 
-    void loop()
+void loop()
-    {
+{
   // Process incoming messages (like config and light state from controller)
   gw.process();		
       
@@ -129,11 +128,11 @@
   	analogWrite(GREEN_PIN, greenval);
   	analogWrite(BLUE_PIN, blueval);
    } 
-    }
+}
 
 
-    void incomingMessage(const MyMessage &message)
+void incomingMessage(const MyMessage &message)
-	  {
+{
   if (message.isAck())
   {
    	Serial.println("Got ack from gateway");
@@ -230,10 +229,10 @@
     	// Stop the show if it's running
     	if (isShow==1){ rgbShowStop(message.sensor); }
     }
-    }
+}
    
-   void rgbShow()
+void rgbShow()
-  	{
+{
   time = millis();
   redval = 128+250*cos(2*PI/300000*time);
   greenval = 128+250*cos(2*PI/300000*time-222);
@@ -242,20 +241,20 @@
   redval = constrain(redval, 0, 255);
   greenval = constrain(greenval, 0, 255);
   blueval = constrain(blueval, 0, 255);
-  	}
+}
 
-   void rgbShowOn()
+void rgbShowOn()
-  	{
+{
   // define show On
   isShow=1;
   // Save state
   gw.saveState(0, 1); 
   // Write some debug info
   Serial.println("Show must go on");
-  	}
+}
    
-   void rgbShowOff()
+void rgbShowOff()
-  	{
+{
   // define show Off
   isShow=0;
   // Save state
@@ -272,10 +271,10 @@
   gw.send( GreenStatus.set(gw.loadState(GREEN_PIN)), false );
   gw.send( BlueStatus.set(gw.loadState(BLUE_PIN)), false );
   gw.send( rgbShowState.set(0), false);
-    }
+}
 
-    void rgbShowStop(int sensor)
+void rgbShowStop(int sensor)
-    {
+{
    // define show Off
    isShow=0;
    // Save state
@@ -300,7 +299,7 @@
         gw.send( BlueStatus.set(gw.loadState(BLUE_PIN)), false );
     }
     gw.send( rgbShowState.set(0), false);
-    }
+}