diff --git a/libraries/MySensors/examples/DallasTemperatureSensor/DallasTemperatureSensor.ino b/libraries/MySensors/examples/DallasTemperatureSensor/DallasTemperatureSensor.ino
index b62e869..242cde5 100644
--- a/libraries/MySensors/examples/DallasTemperatureSensor/DallasTemperatureSensor.ino
+++ b/libraries/MySensors/examples/DallasTemperatureSensor/DallasTemperatureSensor.ino
@@ -46,6 +46,7 @@ void setup()
  
 void loop()     
 {     
+  gw.powerUp();
   sensors.requestTemperatures(); // Fetch temperatures from Dallas
   delay(100);
   for (int i=0; i<numSensors && i<MAX_ATTACHED_DS18B20; i++) {
diff --git a/libraries/MySensors/examples/DistanceSensor/DistanceSensor.ino b/libraries/MySensors/examples/DistanceSensor/DistanceSensor.ino
index 7ab2463..dcabe03 100644
--- a/libraries/MySensors/examples/DistanceSensor/DistanceSensor.ino
+++ b/libraries/MySensors/examples/DistanceSensor/DistanceSensor.ino
@@ -35,6 +35,7 @@ void setup()
 
 void loop()      
 {     
+  gw.powerUp(); // Power up radio
   int dist = metric?sonar.ping_cm():sonar.ping_in();
 
   Serial.print("Ping: ");
diff --git a/libraries/MySensors/examples/EnergyMeterPulseSensor/EnergyMeterPulseSensor.ino b/libraries/MySensors/examples/EnergyMeterPulseSensor/EnergyMeterPulseSensor.ino
index 6319456..a823f0e 100644
--- a/libraries/MySensors/examples/EnergyMeterPulseSensor/EnergyMeterPulseSensor.ino
+++ b/libraries/MySensors/examples/EnergyMeterPulseSensor/EnergyMeterPulseSensor.ino
@@ -60,9 +60,11 @@ void setup()
 
 void loop()     
 { 
-  unsigned long now = millis();
+   unsigned long now = millis();
   // Only send values at a maximum frequency or woken up from sleep
   if (SLEEP_MODE || now - lastSend > 1000*SEND_FREQUENCY) {
+    gw.powerUp(); // Power up radio
+
     // New watt value has been calculated  
     if (!SLEEP_MODE && watt != oldWatt) {
       // Check that we dont get unresonable large watt value. 
diff --git a/libraries/MySensors/examples/HumiditySensor/HumiditySensor.ino b/libraries/MySensors/examples/HumiditySensor/HumiditySensor.ino
index d58600b..5300455 100644
--- a/libraries/MySensors/examples/HumiditySensor/HumiditySensor.ino
+++ b/libraries/MySensors/examples/HumiditySensor/HumiditySensor.ino
@@ -36,7 +36,8 @@ void setup()
 }
 
 void loop()      
-{     
+{  
+  gw.powerUp(); // Power up radio
   delay(dht.getMinimumSamplingPeriod());
 
   float temperature = dht.getTemperature();
diff --git a/libraries/MySensors/examples/LightSensor/LightSensor.ino b/libraries/MySensors/examples/LightSensor/LightSensor.ino
index 0de64ee..62a24cf 100644
--- a/libraries/MySensors/examples/LightSensor/LightSensor.ino
+++ b/libraries/MySensors/examples/LightSensor/LightSensor.ino
@@ -28,6 +28,8 @@ void setup()
 
 void loop()      
 {     
+  gw.powerUp(); // Power up radio
+
   int lightLevel = (1023-analogRead(LIGHT_SENSOR_ANALOG_PIN))/10.23; 
   Serial.println(lightLevel);
   if (lightLevel != lastLightLevel) {
diff --git a/libraries/MySensors/examples/MotionSensor/MotionSensor.ino b/libraries/MySensors/examples/MotionSensor/MotionSensor.ino
index 357aedb..24e7513 100644
--- a/libraries/MySensors/examples/MotionSensor/MotionSensor.ino
+++ b/libraries/MySensors/examples/MotionSensor/MotionSensor.ino
@@ -28,6 +28,7 @@ void setup()
 
 void loop()     
 {     
+  gw.powerUp(); // Power up radio
   // Read digital motion value
   boolean tripped = digitalRead(DIGITAL_INPUT_SENSOR) == HIGH; 
         
diff --git a/libraries/MySensors/examples/PressureSensor/PressureSensor.ino b/libraries/MySensors/examples/PressureSensor/PressureSensor.ino
index 2712b64..f1fd7ff 100644
--- a/libraries/MySensors/examples/PressureSensor/PressureSensor.ino
+++ b/libraries/MySensors/examples/PressureSensor/PressureSensor.ino
@@ -47,6 +47,8 @@ void setup() {
 
 
 void loop() {
+  gw.powerUp(); // Power up radio
+
   float pressure = bmp.readPressure();
   float temperature = bmp.readTemperature();
   
diff --git a/libraries/MySensors/examples/SoilMoistSensor/SoilMoistSensor.ino b/libraries/MySensors/examples/SoilMoistSensor/SoilMoistSensor.ino
index 6e08ba7..4f4ab49 100644
--- a/libraries/MySensors/examples/SoilMoistSensor/SoilMoistSensor.ino
+++ b/libraries/MySensors/examples/SoilMoistSensor/SoilMoistSensor.ino
@@ -30,6 +30,7 @@ int lastSoilValue = -1;
  
 void loop()     
 {     
+  gw.powerUp(); // Power up radio
   // Read digital soil value
   int soilValue = digitalRead(DIGITAL_INPUT_SOIL_SENSOR); // 1 = Not triggered, 0 = In soil with water 
   if (soilValue != lastSoilValue) {
diff --git a/libraries/MySensors/examples/WaterMeterPulseSensor/WaterMeterPulseSensor.ino b/libraries/MySensors/examples/WaterMeterPulseSensor/WaterMeterPulseSensor.ino
index 7490402..7193ce8 100644
--- a/libraries/MySensors/examples/WaterMeterPulseSensor/WaterMeterPulseSensor.ino
+++ b/libraries/MySensors/examples/WaterMeterPulseSensor/WaterMeterPulseSensor.ino
@@ -79,6 +79,8 @@ void loop()
 	
     // Only send values at a maximum frequency or woken up from sleep
   if (SLEEP_MODE || currentTime - lastSend > 1000*SEND_FREQUENCY) {
+    gw.powerUp(); // Power up radio
+    
     // New flow value has been calculated  
     if (!SLEEP_MODE && flow != oldflow) {
       // Check that we dont get unresonable large flow value.