MySmartHome/MySensors
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Add support for serial gateway to Rpi

Browse Source
This commit is contained in:
Marcelo Aquino
2016-08-21 21:01:26 -03:00
parent cb8c98431e
commit 412e41967f
20 changed files with 1241 additions and 239 deletions
Download Patch File Download Diff File Expand all files Collapse all files
configure
Vendored
+18 -8
View File
@@ -35,15 +35,10 @@ MySensors options:
--my-debug=[enable|disable]
Enables or disables debugging.
Default to enable.
--my-gateway=[none|ethernet|mqtt]
--my-config-file=<FILE> Config file path. [/etc/MySensorGateway.cfg]
--my-gateway=[none|ethernet|serial|mqtt]
Gateway type, set to none to disable gateway feature.
Default to ethernet.
--my-config-file=<FILE> Config file path. [/etc/MySensorGateway.cfg]
--my-radio=[none|nrf24] Radio type, set to none to disable radio feature.
Default to rf24.
--my-rf24-channel=<0-125> RF channel for the sensor net, 0-125.
--my-rf24-pa-level=[RF24_PA_MAX|RF24_PA_LOW]
RF24 PA level.
--my-controller-url-address=<URL>
Controller or MQTT broker url.
--my-controller-ip-address=<IP>
@@ -51,11 +46,18 @@ MySensors options:
Use commas instead of points. Example: 127,0,0,1
--my-port=<PORT> The port to keep open on gateway mode.
If gateway is set to mqtt, it sets the broker port.
--my-serial-port=<PORT> Serial port. [/dev/ttyUSB0]
--my-serial-baudrate=<BAUD> Serial baud rate. [115200]
--my-mqtt-client-id=<ID> MQTT client id.
--my-mqtt-publish-topic-prefix=<PREFIX>
MQTT publish topic prefix.
--my-mqtt-subscribe-topic-prefix=<PREFIX>
MQTT subscribe topic prefix.
--my-radio=[none|nrf24] Radio type, set to none to disable radio feature.
Default to rf24.
--my-rf24-channel=<0-125> RF channel for the sensor net, 0-125.
--my-rf24-pa-level=[RF24_PA_MAX|RF24_PA_LOW]
RF24 PA level.
--my-rf24-irq-pin=<PIN> Pin number connected to nRF24L01 IRQ pin.
For RaspberryPi use BCM numbering.
--my-rx-message-buffer-size=<SIZE>
@@ -251,6 +253,12 @@ for opt do
--my-radio=*)
radio_type=${optarg}
;;
--my-serial-port=*)
CXXFLAGS="-DMY_LINUX_SERIAL_PORT=\\\"${optarg}\\\" $CXXFLAGS"
;;
--my-serial-baudrate=*)
CXXFLAGS="-DMY_BAUD_RATE=${optarg} $CXXFLAGS"
;;
--my-rf24-channel=*)
CXXFLAGS="-DMY_RF24_CHANNEL=${optarg} $CXXFLAGS"
;;
@@ -305,7 +313,7 @@ if [ -z "${CPUFLAGS}" ]; then
CPUFLAGS=$(gcc_cpu_flags $SOC)
fi
CXXFLAGS="$CPUFLAGS -Ofast -g -Wall -Wextra -DLINUX $CXXFLAGS"
CXXFLAGS="$CPUFLAGS -Ofast -g -Wall -Wextra $CXXFLAGS"
if [[ $TYPE == "RPi2" || $TYPE == "RPi3" || $REV == "0010" ]]; then
CXXFLAGS+="-D__RPI_BPLUS"
@@ -317,6 +325,8 @@ fi
if [[ ${gateway_type} == "ethernet" ]]; then
CXXFLAGS="-DMY_GATEWAY_LINUX $CXXFLAGS"
elif [[ ${gateway_type} == "serial" ]]; then
CXXFLAGS="-DMY_GATEWAY_SERIAL $CXXFLAGS"
elif [[ ${gateway_type} == "mqtt" ]]; then
LDFLAGS="-lmosquitto $LDFLAGS"
CXXFLAGS="-DMY_GATEWAY_LINUX -DMY_GATEWAY_MQTT_CLIENT $CXXFLAGS"