Merge pull request #397 from fallberg/encryptiontests

Added NRF24 and RFM69 encryption to Jenkins tests

libraries/MySensors/core/MyTransportRFM69.cpp

@@ -32,7 +32,7 @@ bool transportInit() {
 		#ifdef MY_RFM69_ENABLE_ENCRYPTION
 			uint8_t _psk[16];
 			hwReadConfigBlock((void*)_psk, (void*)EEPROM_RF_ENCRYPTION_AES_KEY_ADDRESS, 16);
-			_radio.encrypt(_psk);
+			_radio.encrypt((const char*)_psk);
 			memset(_psk, 0, 16); // Make sure it is purged from memory when set
 		#endif
 		return true;

libraries/MySensors/drivers/AES/AES_config.h

@@ -31,6 +31,8 @@
 	#define PSTR(x) (x)
 #elif defined(ARDUINO_ARCH_ESP8266)
 	#include <pgmspace.h>
+#elif defined(ARDUINO_ARCH_SAMD)
+	#define printf_P printf
 #else
 	#include <avr/pgmspace.h>
 #endif

libraries/MySensors/tests/Arduino/sketches/hard_signing_no_whitelisting_full_debug/hard_signing_no_whitelisting_full_debug.ino

@@ -20,25 +20,13 @@
  */
 #define MY_DEBUG
 #define MY_DEBUG_VERBOSE_SIGNING
-#define MY_RADIO_NRF24 //!< NRF24L01 radio driver
+#define MY_RADIO_NRF24
-//#define MY_SIGNING_SOFT //!< Software signing
+//#define MY_SIGNING_SOFT
-#define MY_SIGNING_ATSHA204 //!< Hardware signing using ATSHA204A
+#define MY_SIGNING_ATSHA204
 //#define MY_SIGNING_NODE_WHITELISTING {{.nodeId = GATEWAY_ADDRESS,.serial = {0x09,0x08,0x07,0x06,0x05,0x04,0x03,0x02,0x01}}}
 #define MY_SIGNING_REQUEST_SIGNATURES
-#define MY_SIGNING_SOFT_RANDOMSEED_PIN 7 //!< Unconnected analog pin for random seed
+#define MY_SIGNING_SOFT_RANDOMSEED_PIN 7
-#define MY_SIGNING_ATSHA204_PIN 17 //!< A3 - pin where ATSHA204 is attached
+#define MY_SIGNING_ATSHA204_PIN 17
 
 #include <SPI.h>
 #include <MySensor.h>
-
-void setup() {
-}
-
-void presentation() {
-  // Present locally attached sensors here
-}
-
-
-void loop() {
-  // Send locally attached sensors data here
-}

libraries/MySensors/tests/Arduino/sketches/hard_signing_whitelisting_full_debug/hard_signing_whitelisting_full_debug.ino

@@ -20,25 +20,13 @@
  */
 #define MY_DEBUG
 #define MY_DEBUG_VERBOSE_SIGNING
-#define MY_RADIO_NRF24 //!< NRF24L01 radio driver
+#define MY_RADIO_NRF24
-//#define MY_SIGNING_SOFT //!< Software signing
+//#define MY_SIGNING_SOFT
-#define MY_SIGNING_ATSHA204 //!< Hardware signing using ATSHA204A
+#define MY_SIGNING_ATSHA204
 #define MY_SIGNING_NODE_WHITELISTING {{.nodeId = GATEWAY_ADDRESS,.serial = {0x09,0x08,0x07,0x06,0x05,0x04,0x03,0x02,0x01}}}
 #define MY_SIGNING_REQUEST_SIGNATURES
-#define MY_SIGNING_SOFT_RANDOMSEED_PIN 7 //!< Unconnected analog pin for random seed
+#define MY_SIGNING_SOFT_RANDOMSEED_PIN 7
-#define MY_SIGNING_ATSHA204_PIN 17 //!< A3 - pin where ATSHA204 is attached
+#define MY_SIGNING_ATSHA204_PIN 17
 
 #include <SPI.h>
 #include <MySensor.h>
-
-void setup() {
-}
-
-void presentation() {
-  // Present locally attached sensors here
-}
-
-
-void loop() {
-  // Send locally attached sensors data here
-}

libraries/MySensors/tests/Arduino/sketches/hard_signing_whitelisting_full_debug_nrf24_rsa/hard_signing_whitelisting_full_debug_nrf24_rsa.ino

@@ -0,0 +1,33 @@
+/*
+ * The MySensors Arduino library handles the wireless radio link and protocol
+ * between your home built sensors/actuators and HA controller of choice.
+ * The sensors forms a self healing radio network with optional repeaters. Each
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
+ * network topology allowing messages to be routed to nodes.
+ *
+ * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
+ * Copyright (C) 2013-2015 Sensnology AB
+ * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
+ *
+ * Documentation: http://www.mysensors.org
+ * Support Forum: http://forum.mysensors.org
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ *******************************
+ */
+#define MY_DEBUG
+#define MY_DEBUG_VERBOSE_SIGNING
+#define MY_RADIO_NRF24
+//#define MY_SIGNING_SOFT
+#define MY_SIGNING_ATSHA204
+#define MY_SIGNING_NODE_WHITELISTING {{.nodeId = GATEWAY_ADDRESS,.serial = {0x09,0x08,0x07,0x06,0x05,0x04,0x03,0x02,0x01}}}
+#define MY_SIGNING_REQUEST_SIGNATURES
+#define MY_SIGNING_SOFT_RANDOMSEED_PIN 7
+#define MY_SIGNING_ATSHA204_PIN 17
+#define MY_RF24_ENABLE_ENCRYPTION
+
+#include <SPI.h>
+#include <MySensor.h>

libraries/MySensors/tests/Arduino/sketches/hard_signing_whitelisting_full_debug_rfm69_rsa/hard_signing_whitelisting_full_debug_rfm69_rsa.ino

@@ -0,0 +1,33 @@
+/*
+ * The MySensors Arduino library handles the wireless radio link and protocol
+ * between your home built sensors/actuators and HA controller of choice.
+ * The sensors forms a self healing radio network with optional repeaters. Each
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
+ * network topology allowing messages to be routed to nodes.
+ *
+ * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
+ * Copyright (C) 2013-2015 Sensnology AB
+ * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
+ *
+ * Documentation: http://www.mysensors.org
+ * Support Forum: http://forum.mysensors.org
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ *******************************
+ */
+#define MY_DEBUG
+#define MY_DEBUG_VERBOSE_SIGNING
+#define MY_RADIO_RFM69
+//#define MY_SIGNING_SOFT
+#define MY_SIGNING_ATSHA204
+#define MY_SIGNING_NODE_WHITELISTING {{.nodeId = GATEWAY_ADDRESS,.serial = {0x09,0x08,0x07,0x06,0x05,0x04,0x03,0x02,0x01}}}
+#define MY_SIGNING_REQUEST_SIGNATURES
+#define MY_SIGNING_SOFT_RANDOMSEED_PIN 7
+#define MY_SIGNING_ATSHA204_PIN 17
+#define MY_RFM69_ENABLE_ENCRYPTION
+
+#include <SPI.h>
+#include <MySensor.h>

libraries/MySensors/tests/Arduino/sketches/soft_signing_no_whitelisting_full_debug/soft_signing_no_whitelisting_full_debug.ino

@@ -20,25 +20,13 @@
  */
 #define MY_DEBUG
 #define MY_DEBUG_VERBOSE_SIGNING
-#define MY_RADIO_NRF24 //!< NRF24L01 radio driver
+#define MY_RADIO_NRF24
-#define MY_SIGNING_SOFT //!< Software signing
+#define MY_SIGNING_SOFT
-//#define MY_SIGNING_ATSHA204 //!< Hardware signing using ATSHA204A
+//#define MY_SIGNING_ATSHA204
 //#define MY_SIGNING_NODE_WHITELISTING {{.nodeId = GATEWAY_ADDRESS,.serial = {0x09,0x08,0x07,0x06,0x05,0x04,0x03,0x02,0x01}}}
 #define MY_SIGNING_REQUEST_SIGNATURES
-#define MY_SIGNING_SOFT_RANDOMSEED_PIN 7 //!< Unconnected analog pin for random seed
+#define MY_SIGNING_SOFT_RANDOMSEED_PIN 7
-#define MY_SIGNING_ATSHA204_PIN 17 //!< A3 - pin where ATSHA204 is attached
+#define MY_SIGNING_ATSHA204_PIN 17
 
 #include <SPI.h>
 #include <MySensor.h>
-
-void setup() {
-}
-
-void presentation() {
-  // Present locally attached sensors here
-}
-
-
-void loop() {
-  // Send locally attached sensors data here
-}

libraries/MySensors/tests/Arduino/sketches/soft_signing_whitelisting_full_debug/soft_signing_whitelisting_full_debug.ino

@@ -20,25 +20,13 @@
  */
 #define MY_DEBUG
 #define MY_DEBUG_VERBOSE_SIGNING
-#define MY_RADIO_NRF24 //!< NRF24L01 radio driver
+#define MY_RADIO_NRF24
-#define MY_SIGNING_SOFT //!< Software signing
+#define MY_SIGNING_SOFT
-//#define MY_SIGNING_ATSHA204 //!< Hardware signing using ATSHA204A
+//#define MY_SIGNING_ATSHA204
 #define MY_SIGNING_NODE_WHITELISTING {{.nodeId = GATEWAY_ADDRESS,.serial = {0x09,0x08,0x07,0x06,0x05,0x04,0x03,0x02,0x01}}}
 #define MY_SIGNING_REQUEST_SIGNATURES
-#define MY_SIGNING_SOFT_RANDOMSEED_PIN 7 //!< Unconnected analog pin for random seed
+#define MY_SIGNING_SOFT_RANDOMSEED_PIN 7
-#define MY_SIGNING_ATSHA204_PIN 17 //!< A3 - pin where ATSHA204 is attached
+#define MY_SIGNING_ATSHA204_PIN 17
 
 #include <SPI.h>
 #include <MySensor.h>
-
-void setup() {
-}
-
-void presentation() {
-  // Present locally attached sensors here
-}
-
-
-void loop() {
-  // Send locally attached sensors data here
-}