use codebender to compile sketches

I had codebender username/password included originally but compiling
works without. Codebender usage guidelines allow "usage via API".

NodeJsController/NodeJsController.js

@@ -1,18 +1,18 @@
-const gwType						= 'Ethernet';
+//const gwType						= 'Ethernet';
-const gwAddress						= '10.0.1.99';
+//const gwAddress						= '10.0.1.99';
-const gwPort						= 9999;
+//const gwPort						= 9999;
 
-//const gwType = 'Serial';
+const gwType = 'Serial';
 //const gwPort = 'COM4';
-//const gwPort = '/dev/ttyUSB0';
+const gwPort = '/dev/ttyAMA0';
-//const gwBaud = 115200;
+const gwBaud = 115200;
 
 const dbAddress						= '127.0.0.1';
 const dbPort						= 27017;
 const dbName						= 'MySensorsDb';
 
-const fwHexFiles 					= [ ];
+const fwSketches					= [ '../libraries/MySensors/examples/DallasTemperatureSensor/DallasTemperatureSensor.ino' ];
-const fwDefaultType 				= 0xFFFF; // index of hex file from array above (0xFFFF == none defined)
+const fwDefaultType 				= 0; // index of hex file from array above
 
 const FIRMWARE_BLOCK_SIZE			= 16;
 const BROADCAST_ADDRESS				= 255;
@@ -117,6 +117,8 @@ const P_ULONG32						= 5;
 const P_CUSTOM						= 6;
 
 var fs = require('fs');
+var path = require('path');
+var requestify = require('requestify');
 var appendedString="";
 
 function crcUpdate(old, value) {
@@ -146,13 +148,32 @@ function pushDWord(arr, val) {
 	arr.push((val  >> 24) & 0x000000FF);
 }
 
-function loadFirmware(fwtype, fwversion, filename, db) {
+function loadFirmware(fwtype, fwversion, sketch, db) {
+	var filename = path.basename(sketch);
+        console.log("compiling firmware: " + filename);
+        var req = {
+                files: [{
+                        filename: filename,
+                        content: fs.readFileSync(sketch).toString()
+                }],
+                format: "hex",
+                version: "105",
+                build: {
+                        mcu: "atmega328p",
+                        f_cpu: "16000000L",
+                        core: "arduino",
+                        variant: "standard"
+                }
+        };
+        requestify.post('https://codebender.cc/utilities/compile/', req).then(function(res) {
+                var body = JSON.parse(res.getBody());
+                if (body.success) {
 			console.log("loading firmware: " + filename);
 			fwdata = [];
 			var start = 0;
 			var end = 0;
 			var pos = 0;
-	var hex = fs.readFileSync(filename).toString().split("\n");
+			var hex = body.output.split("\n");
 			for(l in hex) {
 				line = hex[l].trim();
 				if (line.length > 0) {
@@ -216,6 +237,10 @@ function loadFirmware(fwtype, fwversion, filename, db) {
 				});
 			});
 			console.log("loading firmware done. blocks: " + blocks + " / crc: " + crc);
+                } else {
+                        console.log("error: %j", res.body);
+                }
+        });
 }
 
 /*
@@ -645,8 +670,8 @@ dbc.connect('mongodb://' + dbAddress + ':' + dbPort + '/' + dbName, function(err
 	db.createCollection('firmware', function(err, collection) { });
 
 	// ToDo : check for new hex files / only load if new / get type and version from filename
-	for (var i = 0; i < fwHexFiles.length; i++)
+	for (var i = 0; i < fwSketches.length; i++)
-		loadFirmware(i, 1, fwHexFiles[i], db);
+		loadFirmware(i, 1, fwSketches[i], db);
 
 	var gw;
 	if (gwType == 'Ethernet') {

NodeJsController/package.json

@@ -5,6 +5,7 @@
   "dependencies": {
     "mongodb": "~1.4.7",
     "net": "~1.0.2",
+    "requestify": "^0.1.16",
     "serialport": "^1.4.5"
   }
 }