ESP8266: Fix example compilation error (#932)

examples/AirQualitySensor/AirQualitySensor.ino

@@ -63,7 +63,7 @@
 #define         GAS_CO                       (1)
 #define         GAS_SMOKE                    (2)
 /*****************************Globals***********************************************/
-unsigned long SLEEP_TIME = 30000; // Sleep time between reads (in milliseconds)
+uint32_t SLEEP_TIME = 30000; // Sleep time between reads (in milliseconds)
 //VARIABLES
 float Ro = 10000.0;    // this has to be tuned 10K Ohm
 int val = 0;           // variable to store the value coming from the sensor

examples/BatteryPoweredSensor/BatteryPoweredSensor.ino

@@ -41,7 +41,7 @@
 
 int BATTERY_SENSE_PIN = A0;  // select the input pin for the battery sense point
 
-unsigned long SLEEP_TIME = 900000;  // sleep time between reads (seconds * 1000 milliseconds)
+uint32_t SLEEP_TIME = 900000;  // sleep time between reads (seconds * 1000 milliseconds)
 int oldBatteryPcnt = 0;
 
 void setup()

examples/CO2Sensor/CO2Sensor.ino

@@ -1,4 +1,4 @@
-/*
+/**
  * The MySensors Arduino library handles the wireless radio link and protocol
  * between your home built sensors/actuators and HA controller of choice.
  * The sensors forms a self healing radio network with optional repeaters. Each
@@ -52,7 +52,7 @@
 #define CHILD_ID_AIQ 0
 #define AIQ_SENSOR_ANALOG_PIN 6
 
-unsigned long SLEEP_TIME = 30*1000; // Sleep time between reads (in milliseconds)
+uint32_t SLEEP_TIME = 30*1000; // Sleep time between reads (in milliseconds)
 
 float valAIQ =0.0;
 float lastAIQ =0.0;
@@ -78,12 +78,12 @@ void presentation()
 void loop()
 {
 
-	//unsigned long duration = pulseIn(AIQ_SENSOR_ANALOG_PIN, HIGH);
+	//uint32_t duration = pulseIn(AIQ_SENSOR_ANALOG_PIN, HIGH);
 	while(digitalRead(AIQ_SENSOR_ANALOG_PIN) == HIGH) {
 		;
 	}
 	//wait for the pin to go HIGH and measure HIGH time
-	unsigned long duration = pulseIn(AIQ_SENSOR_ANALOG_PIN, HIGH);
+	uint32_t duration = pulseIn(AIQ_SENSOR_ANALOG_PIN, HIGH);
 
 	//Serial.print(duration/1000); Serial.println(" ms ");
 	//from datasheet

examples/DustSensor/DustSensor.ino

@@ -52,7 +52,7 @@
 #define CHILD_ID_DUST 0
 #define DUST_SENSOR_ANALOG_PIN 1
 
-unsigned long SLEEP_TIME = 30*1000; // Sleep time between reads (in milliseconds)
+uint32_t SLEEP_TIME = 30*1000; // Sleep time between reads (in milliseconds)
 //VARIABLES
 int val = 0;           // variable to store the value coming from the sensor
 float valDUST =0.0;

examples/DustSensorDSM/DustSensorDSM.ino

@@ -46,18 +46,18 @@
 #define DUST_SENSOR_DIGITAL_PIN_PM10  6
 #define DUST_SENSOR_DIGITAL_PIN_PM25  3
 
-unsigned long SLEEP_TIME = 30*1000; // Sleep time between reads (in milliseconds)
+uint32_t SLEEP_TIME = 30*1000; // Sleep time between reads (in milliseconds)
 //VARIABLES
 int val = 0;           // variable to store the value coming from the sensor
 float valDUSTPM25 =0.0;
 float lastDUSTPM25 =0.0;
 float valDUSTPM10 =0.0;
 float lastDUSTPM10 =0.0;
-unsigned long duration;
+uint32_t duration;
-unsigned long starttime;
+uint32_t starttime;
-unsigned long endtime;
+uint32_t endtime;
-unsigned long sampletime_ms = 30000;
+uint32_t sampletime_ms = 30000;
-unsigned long lowpulseoccupancy = 0;
+uint32_t lowpulseoccupancy = 0;
 float ratio = 0;
 long concentrationPM25 = 0;
 long concentrationPM10 = 0;
@@ -88,7 +88,7 @@ void presentation()
 void loop()
 {
 
-	//get PM 2.5 density of particles over 2.5 μm.
+	//get PM 2.5 density of particles over 2.5 µm.
 	concentrationPM25=(long)getPM(DUST_SENSOR_DIGITAL_PIN_PM25);
 	Serial.print("PM25: ");
 	Serial.println(concentrationPM25);
@@ -99,7 +99,7 @@ void loop()
 		lastDUSTPM25 = ceil(concentrationPM25);
 	}
 
-	//get PM 1.0 - density of particles over 1 μm.
+	//get PM 1.0 - density of particles over 1 µm.
 	concentrationPM10=getPM(DUST_SENSOR_DIGITAL_PIN_PM10);
 	Serial.print("PM10: ");
 	Serial.println(concentrationPM10);

examples/EnergyMeterPulseSensor/EnergyMeterPulseSensor.ino

@@ -51,17 +51,17 @@
 #define MAX_WATT 10000          // Max watt value to report. This filetrs outliers.
 #define CHILD_ID 1              // Id of the sensor child
 
-unsigned long SEND_FREQUENCY =
+uint32_t SEND_FREQUENCY =
     20000; // Minimum time between send (in milliseconds). We don't wnat to spam the gateway.
 double ppwh = ((double)PULSE_FACTOR)/1000; // Pulses per watt hour
 bool pcReceived = false;
-volatile unsigned long pulseCount = 0;
+volatile uint32_t pulseCount = 0;
-volatile unsigned long lastBlink = 0;
+volatile uint32_t lastBlink = 0;
-volatile unsigned long watt = 0;
+volatile uint32_t watt = 0;
-unsigned long oldPulseCount = 0;
+uint32_t oldPulseCount = 0;
-unsigned long oldWatt = 0;
+uint32_t oldWatt = 0;
 double oldKwh;
-unsigned long lastSend;
+uint32_t lastSend;
 MyMessage wattMsg(CHILD_ID,V_WATT);
 MyMessage kwhMsg(CHILD_ID,V_KWH);
 MyMessage pcMsg(CHILD_ID,V_VAR1);
@@ -91,7 +91,7 @@ void presentation()
 
 void loop()
 {
-	unsigned long now = millis();
+	uint32_t now = millis();
 	// Only send values at a maximum frequency or woken up from sleep
 	bool sendTime = now - lastSend > SEND_FREQUENCY;
 	if (pcReceived && (SLEEP_MODE || sendTime)) {
@@ -99,7 +99,7 @@ void loop()
 		if (!SLEEP_MODE && watt != oldWatt) {
 			// Check that we dont get unresonable large watt value.
 			// could hapen when long wraps or false interrupt triggered
-			if (watt<((unsigned long)MAX_WATT)) {
+			if (watt<((uint32_t)MAX_WATT)) {
 				send(wattMsg.set(watt));  // Send watt value to gw
 			}
 			Serial.print("Watt:");
@@ -142,8 +142,8 @@ void receive(const MyMessage &message)
 void onPulse()
 {
 	if (!SLEEP_MODE) {
-		unsigned long newBlink = micros();
+		uint32_t newBlink = micros();
-		unsigned long interval = newBlink-lastBlink;
+		uint32_t interval = newBlink-lastBlink;
 		if (interval<10000L) { // Sometimes we get interrupt on RISING
 			return;
 		}
@@ -152,6 +152,3 @@ void onPulse()
 	}
 	pulseCount++;
 }
-
-
-

examples/LightSensor/LightSensor.ino

@@ -40,7 +40,7 @@
 #define CHILD_ID_LIGHT 0
 #define LIGHT_SENSOR_ANALOG_PIN 0
 
-unsigned long SLEEP_TIME = 30000; // Sleep time between reads (in milliseconds)
+uint32_t SLEEP_TIME = 30000; // Sleep time between reads (in milliseconds)
 
 MyMessage msg(CHILD_ID_LIGHT, V_LIGHT_LEVEL);
 int lastLightLevel;

examples/MockMySensors/MockMySensors.ino

@@ -86,7 +86,7 @@
 
 
 // Global Vars
-unsigned long SLEEP_TIME = 900000; // Sleep time between reads (in milliseconds)
+uint32_t SLEEP_TIME = 900000; // Sleep time between reads (in milliseconds)
 bool metric = true;
 long randNumber;
 
@@ -721,7 +721,7 @@ void loop()
 }
 
 // This is called when a new time value was received
-void receiveTime(unsigned long controllerTime)
+void receiveTime(uint32_t controllerTime)
 {
 
 	Serial.print("Time value received: ");

examples/MotionSensor/MotionSensor.ino

@@ -38,7 +38,7 @@
 
 #include <MySensors.h>
 
-unsigned long SLEEP_TIME = 120000; // Sleep time between reports (in milliseconds)
+uint32_t SLEEP_TIME = 120000; // Sleep time between reports (in milliseconds)
 #define DIGITAL_INPUT_SENSOR 3   // The digital input you attached your motion sensor.  (Only 2 and 3 generates interrupt!)
 #define CHILD_ID 1   // Id of the sensor child
 

examples/MotionSensorRS485/MotionSensorRS485.ino

@@ -62,7 +62,7 @@
 
 #include <MySensors.h>
 
-unsigned long SLEEP_TIME = 120000; // Sleep time between reports (in milliseconds)
+uint32_t SLEEP_TIME = 120000; // Sleep time between reports (in milliseconds)
 #define DIGITAL_INPUT_SENSOR 3   // The digital input you attached your motion sensor.  (Only 2 and 3 generates interrupt!)
 #define CHILD_ID 1   // Id of the sensor child
 

examples/PHSensor/PHSensor.ino

@@ -35,7 +35,7 @@
 
 #define COMPARE_PH 1 // Send PH only if changed? 1 = Yes 0 = No
 
-unsigned long SLEEP_TIME = 60000; // Sleep time between reads (in milliseconds)
+uint32_t SLEEP_TIME = 60000; // Sleep time between reads (in milliseconds)
 float lastPH;
 bool receivedConfig = false;
 bool metric = true;

examples/SecurityPersonalizer/SecurityPersonalizer.ino

@@ -432,8 +432,8 @@ static const uint8_t reset_buffer[32] = {
 void setup()
 {
 	// Delay startup a bit for serial consoles to catch up
-	unsigned long enter = hwMillis();
+	uint32_t enter = hwMillis();
-	while (hwMillis() - enter < (unsigned long)500);
+	while (hwMillis() - enter < (uint32_t)500);
 #ifdef USE_SOFT_SIGNING
 	// initialize pseudo-RNG
 	hwRandomNumberInit();
@@ -530,8 +530,8 @@ static bool generate_random_data(uint8_t* data, size_t sz)
 #if defined(USE_SOFT_SIGNING) && ! defined(MY_HW_HAS_GETENTROPY)
 	for (size_t i = 0; i < sz; i++) {
 		data[i] = random(256) ^ micros();
-		unsigned long enter = hwMillis();
+		uint32_t enter = hwMillis();
-		while (hwMillis() - enter < (unsigned long)2);
+		while (hwMillis() - enter < (uint32_t)2);
 	}
 	return true;
 #elif defined(USE_SOFT_SIGNING) && defined(MY_HW_HAS_GETENTROPY)

examples/SoilMoistSensor/SoilMoistSensor.ino

@@ -77,7 +77,7 @@
 #define CHILD_ID 0
 
 MyMessage msg(CHILD_ID, V_LEVEL);
-unsigned long SLEEP_TIME = 30000; // Sleep time between reads (in milliseconds)
+uint32_t SLEEP_TIME = 30000; // Sleep time between reads (in milliseconds)
 
 long buffer[NUM_READS];
 int idx;

examples/UVSensor/UVSensor.ino

@@ -51,11 +51,11 @@
 
 #define CHILD_ID_UV 0
 
-unsigned long SLEEP_TIME = 30*1000; // Sleep time between reads (in milliseconds)
+uint32_t SLEEP_TIME = 30*1000; // Sleep time between reads (in milliseconds)
 
 MyMessage uvMsg(CHILD_ID_UV, V_UV);
 
-unsigned long lastSend =0;
+uint32_t lastSend =0;
 float uvIndex;
 float lastUV = -1;
 uint16_t uvIndexValue [12] = { 50, 227, 318, 408, 503, 606, 696, 795, 881, 976, 1079, 1170};
@@ -72,7 +72,7 @@ void presentation()
 
 void loop()
 {
-	unsigned long currentTime = millis();
+	uint32_t currentTime = millis();
 
 	uint16_t uv = analogRead(UV_SENSOR_ANALOG_PIN);// Get UV value
 	if (uv>1170) {

examples/VibrationSensor/VibrationSensor.ino

@@ -48,7 +48,7 @@
 #define VIBRATION_SENSOR_DIGITAL_PIN 3
 #define SensorLED     13
 
-unsigned long SLEEP_TIME = 10*1000; // Sleep time between reads (in seconds)
+uint32_t SLEEP_TIME = 10*1000; // Sleep time between reads (in seconds)
 
 //VARIABLES
 int val = 0;           // variable to store the value coming from the sensor

examples/WaterMeterPulseSensor/WaterMeterPulseSensor.ino

@@ -55,7 +55,7 @@
 
 #define CHILD_ID 1                              // Id of the sensor child
 
-unsigned long SEND_FREQUENCY =
+uint32_t SEND_FREQUENCY =
     30000;           // Minimum time between send (in milliseconds). We don't want to spam the gateway.
 
 MyMessage flowMsg(CHILD_ID,V_FLOW);
@@ -64,17 +64,17 @@ MyMessage lastCounterMsg(CHILD_ID,V_VAR1);
 
 double ppl = ((double)PULSE_FACTOR)/1000;        // Pulses per liter
 
-volatile unsigned long pulseCount = 0;
+volatile uint32_t pulseCount = 0;
-volatile unsigned long lastBlink = 0;
+volatile uint32_t lastBlink = 0;
 volatile double flow = 0;
 bool pcReceived = false;
-unsigned long oldPulseCount = 0;
+uint32_t oldPulseCount = 0;
-unsigned long newBlink = 0;
+uint32_t newBlink = 0;
 double oldflow = 0;
 double volume =0;
 double oldvolume =0;
-unsigned long lastSend =0;
+uint32_t lastSend =0;
-unsigned long lastPulse =0;
+uint32_t lastPulse =0;
 
 void setup()
 {
@@ -102,7 +102,7 @@ void presentation()
 
 void loop()
 {
-	unsigned long currentTime = millis();
+	uint32_t currentTime = millis();
 
 	// Only send values at a maximum frequency or woken up from sleep
 	if (SLEEP_MODE || (currentTime - lastSend > SEND_FREQUENCY)) {
@@ -122,7 +122,7 @@ void loop()
 
 			// Check that we dont get unresonable large flow value.
 			// could hapen when long wraps or false interrupt triggered
-			if (flow<((unsigned long)MAX_FLOW)) {
+			if (flow<((uint32_t)MAX_FLOW)) {
 				send(flowMsg.set(flow, 2));                   // Send flow value to gw
 			}
 		}
@@ -160,7 +160,7 @@ void loop()
 void receive(const MyMessage &message)
 {
 	if (message.type==V_VAR1) {
-		unsigned long gwPulseCount=message.getULong();
+		uint32_t gwPulseCount=message.getULong();
 		pulseCount += gwPulseCount;
 		flow=oldflow=0;
 		Serial.print("Received last pulse count from gw:");
@@ -172,8 +172,8 @@ void receive(const MyMessage &message)
 void onPulse()
 {
 	if (!SLEEP_MODE) {
-		unsigned long newBlink = micros();
+		uint32_t newBlink = micros();
-		unsigned long interval = newBlink-lastBlink;
+		uint32_t interval = newBlink-lastBlink;
 
 		if (interval!=0) {
 			lastPulse = millis();