Cleanup driver initialization

libraries/MySensors/MyConfig.h

@@ -1,6 +1,6 @@
 #ifndef MyConfig_h
 #define MyConfig_h
-
+#include <stdint.h>
 /**********************************
 *  Enable/Disable debug logging
 ***********************************/
@@ -15,13 +15,14 @@
 // which might vary, especially in networks with many hops. 5s ought to be enough for anyone.
 #define MY_VERIFICATION_TIMEOUT_MS 5000
 
-// MySigningDriverAtsha204 settinga
+// MySigningDriverAtsha204 default setting
 #define MY_ATSHA204_PIN 17 // A3 - pin where ATSHA204 is attached
 
-// MySigningDriverAtsha204Soft settings
+// MySigningDriverAtsha204Soft default settings
 #define MY_RANDOMSEED_PIN 7 // A7 - Pin used for random generation (do not connect anything to this)
 // Key to use for HMAC calculation in MySigningDriverAtsha204Soft (32 bytes)
-#define MY_HMAC_KEY 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+#define MY_HMAC_KEY 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
+					0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
 
 
 /**********************************
@@ -30,7 +31,18 @@
 #define RF24_CE_PIN		   9
 #define RF24_CS_PIN		   10
 #define RF24_PA_LEVEL 	   RF24_PA_MAX
+#define RF24_CHANNEL	   76             //RF channel for the sensor net, 0-127
+#define RF24_DATARATE 	   RF24_250KBPS   //RF24_250KBPS for 250kbs, RF24_1MBPS for 1Mbps, or RF24_2MBPS for 2Mbps
+#define RF24_BASE_RADIO_ID ((uint64_t)0xA8A8E1FC00LL) // This is also act as base value for sensor nodeId addresses. Change this (or channel) if you have more than one sensor network.
 
+// Enable SOFTSPI for the W5100 Ethernet module
+//#define SOFTSPI
+#ifdef SOFTSPI
+	// Define the soft SPI pins used for NRF radio
+	const uint8_t SOFT_SPI_MISO_PIN = 16;
+    const uint8_t SOFT_SPI_MOSI_PIN = 15;
+    const uint8_t SOFT_SPI_SCK_PIN = 14;
+#endif
 
 
 #endif