Minor changes + reinserted led-blinking

MQTTGateway/MQTTGateway.ino

@@ -1,77 +1,56 @@
-/*            MyMQTT Gateway 0.1b
+// 				MyMQTT Gateway 0.1b
-
+//
- Created by Daniel Wiegert <daniel.wiegert@gmail.com>
+// Created by Daniel Wiegert <daniel.wiegert@gmail.com>
- Based on Mysensors Ethernet Gateway by Henrik Ekblad <henrik.ekblad@gmail.com>
+// Based on Mysensors Ethernet Gateway by Henrik Ekblad <henrik.ekblad@gmail.com>
- Requires MySensors lib 1.4b
+// http://www.mysensors.org
-    http://www.mysensors.org  
+//
- 
+// Requires MySensors lib 1.4b
- * Don't forget to look at the definitions in MyMQTT.h! 
+//
- * Don't forget to configure Radio pins, IP and MAC-address!
+// Don't forget to look at the definitions in MyMQTT.h!
- 
+// Don't forget to configure Radio pins, IP and MAC-address!
- * Address-layout is : [MQTT_BROKER_PREFIX]/[NodeID]/[SensorID]/Light
+//
-    NodeID and SensorID is number (0-255).
+// Address-layout is : [MQTT_BROKER_PREFIX]/[NodeID]/[SensorID]/Light
-    Last segment is translation of the sensor type, look inside MyMQTT.cpp for 
+// NodeID and SensorID is Decimal number.
-    the definitions. User can change this to their needs.
+// Last segment is translation of the sensor type, look inside MyMQTT.cpp for
-
+// the definitions. User can change this to their needs.
-Example openhab setup: http://www.openhab.org/
+//
-
+// Features:
-* openhab.cfg
+// Supports automatic nodeID delegation
----
+// Recieve sketchname and version Example: (openhab item)
-mqtt:mysensor.url=tcp://192.168.0.234:1883
+//String sketch20 "Node 20 Sketch name [%s]"			(sketch,name,a)	{mqtt="<[mysensor:MyMQTT/20/255/Sketch_name:state:default]"}
-mqtt:mysensor.clientId=MQTT
+//String sketch21 "Node 21 Sketch name [%s]"			(sketch,name,a)	{mqtt="<[mysensor:MyMQTT/21/255/Sketch_name:state:default]"}
----
+// ...
-
+//
-* items/test.items
+// Todo:
----
+// DOCUMENTATION...
-Group test
+// Special commands : clear or set EEPROM Values
-Number Temp_test  "Temp [%.1f °C]" (test)  {mqtt="<[mysensor:MyMQTT/20/#/Temperature:state:default]"}
+// Special commands : Reboot
-Number Hum_test  "Hum [%.1f %%]" (test)  {mqtt="<[mysensor:MyMQTT/20/#/Humidity:state:default]"}
+// ...
-Number test_test  "test [%s]" (test)  {mqtt="<[mysensor:MyMQTT/20/3/#:state:default]"}
+/*
-Switch sw1 "sw 1"     (test)     {<[mysensor:MyMQTT/21/1/Light:command:MAP(1.map)]"}
+Sketch uses 23,666 bytes (77%) of program storage space. Maximum is 30,720 bytes.
---- (Note; # = Wildcard character)
+Global variables use 766 bytes (37%) of dynamic memory, leaving 1,282 bytes for local variables. Maximum is 2,048 bytes.
-
-* sitemap/test.site
----
-sitemap demo label="Menu"
-Frame label="Openhab" {
-        Group item=test label="Test group"
-}
----
-
-* transform/1.map
----
-1=ON
-0=OFF
----
-
-* Features:
- - Supports automatic nodeID delegation
- - Recieve sketchname and version Example: (openhab item)
-String sketch20 "Node 20 Sketch name [%s]"			(sketch,name,a)	{mqtt="<[mysensor:MyMQTT/20/255/Sketch_name:state:default]"}
-String sketch21 "Node 21 Sketch name [%s]"			(sketch,name,a)	{mqtt="<[mysensor:MyMQTT/21/255/Sketch_name:state:default]"}
-[...]
-
-* Todo:
- - DOCUMENTATION...
- - Special commands
-    Read and set EEPROM Values
-    Send Reboot, And reboot gateway itself.
-...
 */
 
 #include <SPI.h>
 #include <MyMQTT.h>
 #include <Ethernet.h>
+#include <MsTimer2.h>
 
 
 // Use this for IBOARD modded to use standard MISO/MOSI/SCK More information see;
 // http://forum.mysensors.org/topic/224/iboard-cheap-single-board-ethernet-arduino-with-radio/5
-#define RADIO_CE_PIN        3            // radio chip enable
+//#define RADIO_CE_PIN        3		// radio chip enable
-#define RADIO_SPI_SS_PIN    8            // radio SPI serial select
+//#define RADIO_SPI_SS_PIN    8		// radio SPI serial select
+//#define RADIO_ERROR_LED_PIN A2		// Error led pin
+//#define RADIO_RX_LED_PIN    A1		// Receive led pin
+//#define RADIO_TX_LED_PIN    A0		// the PCB, on board LED
 
 //Use this for default configured pro mini / nano etc :
-//#define RADIO_CE_PIN        5			// radio chip enable
+#define RADIO_CE_PIN        5		// radio chip enable
-//#define RADIO_SPI_SS_PIN    6			// radio SPI serial select 
+#define RADIO_SPI_SS_PIN    6		// radio SPI serial select
+#define RADIO_ERROR_LED_PIN 7		// Error led pin
+#define RADIO_RX_LED_PIN    8		// Receive led pin
+#define RADIO_TX_LED_PIN    9		// the PCB, on board LED
 
 #define IP_PORT 1883                    // MQTT Listening port
 IPAddress myIp ( 192, 168, 0, 234 );    // Configure your static ip-address here
@@ -80,6 +59,8 @@ byte mac[] = { 0x02, 0xDE, 0xAD, 0x00, 0x00, 0x42 };  // Mac-address - Change th
 
 EthernetServer server = EthernetServer(IP_PORT);
 MyMQTT gw(RADIO_CE_PIN, RADIO_SPI_SS_PIN);
+// Uncomment this constructor if you have leds and include button attached to your gateway
+// MyMQTT gw(RADIO_CE_PIN, RADIO_SPI_SS_PIN, RADIO_RX_LED_PIN, RADIO_TX_LED_PIN, RADIO_ERROR_LED_PIN);
 
 void processEthernetMessages() {
   char inputString[MQTT_MAX_PACKET_SIZE] = "";
@@ -99,16 +80,23 @@ void writeEthernet(char *writeBuffer, int *writeSize) {
   server.write(writeBuffer, *writeSize); // Should this really be *writeSize?
 }
 
+void ledTimersInterrupt() {
+  gw.ledTimersInterrupt();
+}
+
 int main(void) {
   init();
   Ethernet.begin(mac, myIp);
   delay(1000);   // Wait for Ethernet to get configured.
   gw.begin(RF24_PA_LEVEL_GW, RF24_CHANNEL, RF24_DATARATE, writeEthernet);
   server.begin();
+  if (gw.isLedMode()) {
+    // Add led timer interrupt
+    MsTimer2::set(300, ledTimersInterrupt);
+    MsTimer2::start();
+  }
   while (1) {
     processEthernetMessages();
     gw.processRadioMessage();
   }
 }
-
-

libraries/MySensors/MyMQTT.cpp

@@ -73,24 +73,32 @@ PROGMEM const char *sType[] =
 	S_41, S_42, S_43, S_44, S_45, S_46, S_47, S_48, S_49, S_50};
 
 
-MyMQTT::MyMQTT(uint8_t _cepin, uint8_t _cspin) : 
+MyMQTT::MyMQTT(uint8_t _cepin, uint8_t _cspin, uint8_t _rx, uint8_t _tx, uint8_t _er) :
 MySensor(_cepin, _cspin) {
+	if (_rx != NULL) {
+		pinRx = _rx;
+		pinMode(pinRx, OUTPUT);
+		ledMode = true;
+	}
+	if (_tx != NULL) {
+		pinTx = _tx;
+		pinMode(pinTx, OUTPUT);
+		ledMode = true;
+	}
+	if (_er != NULL) {
+		pinEr = _er;
+		pinMode(pinEr, OUTPUT);
+		ledMode = true;
+	}
 }
 
 void MyMQTT::begin(rf24_pa_dbm_e paLevel, uint8_t channel, rf24_datarate_e dataRate, void (*inDataCallback)(char *, int *)) {
 	Serial.begin(BAUD_RATE);
 	repeaterMode = true;
 	isGateway = true;
-	MQTTClient = false;
+	MQTTClientConnected = false;
 	setupRepeaterMode();
-
+	dataCallback = inDataCallback;
-	if (inDataCallback != NULL) {
-		useWriteCallback = true;
-		dataCallback = inDataCallback;
-	} 
-	else {
-		useWriteCallback = false;
-	}
 
 	nc.nodeId = 0;
 	nc.distance = 0;
@@ -110,6 +118,7 @@ void MyMQTT::processRadioMessage() {
 		// A new message was received from one of the sensors
 		MyMessage message = getLastMessage();
 		// Pass along the message from sensors to serial line
+		rxBlink(3);
 		SendMQTT(message);
 	}
 
@@ -130,7 +139,7 @@ void MyMQTT::processMQTTMessage(char *inputString, int inputPos) {
 		buffer[buffsize++] = 0x02;                  // Remaining length
 		buffer[buffsize++] = 0x00;                  // Connection accepted
 		buffer[buffsize++] = 0x00;                  // Reserved
-		MQTTClient=true;
+		MQTTClientConnected=true;
 	}
 	if ((byte)inputString[0] >> 4 == MQTTPINGREQ) {
 		buffer[buffsize++] = MQTTPINGRESP << 4;
@@ -150,7 +159,7 @@ void MyMQTT::processMQTTMessage(char *inputString, int inputPos) {
 		buffer[buffsize++] = (byte)inputString[3];  // Message ID LSB
 	}
 	if ((byte)inputString[0] >> 4 == MQTTDISCONNECT) {
-		MQTTClient=false;
+		MQTTClientConnected=false;
 	}
 	if (buffsize > 0) {
 #ifdef TCPDUMP
@@ -209,7 +218,8 @@ void MyMQTT::processMQTTMessage(char *inputString, int inputPos) {
 		mSetRequestAck(msg,false);
 		mSetAck(msg,false);
 		mSetVersion(msg, PROTOCOL_VERSION);
-		sendRoute(msg);	
+		txBlink(1);
+		if (!sendRoute(msg)) errBlink(1);
 	}
 }
 
@@ -217,7 +227,7 @@ void MyMQTT::processMQTTMessage(char *inputString, int inputPos) {
 void MyMQTT::SendMQTT(MyMessage &msg) {
 //serial(PSTR("%d;%d;%d;%d;%s\n"),msg.sender, msg.sensor, mGetCommand(msg), msg.type, msg.getString(convBuf));
 	buffsize = 0;
-	if (!MQTTClient) return;
+	if (!MQTTClientConnected) return;
 	if (msg.isAck()) {
 Serial.println("msg is ack!");
 		if (msg.sender==255 && mGetCommand(msg)==C_INTERNAL && msg.type==I_ID_REQUEST) {
@@ -248,7 +258,8 @@ Serial.println("msg is ack!");
 			mSetAck(msg,false);
 			msg.set("M");
 			mSetVersion(msg, PROTOCOL_VERSION);
-			sendRoute(msg);
+			txBlink(1);
+			if (!sendRoute(msg)) errBlink(1);
 		} else if (mGetCommand(msg)==C_PRESENTATION && (msg.type==S_ARDUINO_NODE || msg.type==S_ARDUINO_REPEATER_NODE)) {
 			//Doesnt work to check new sensorID here, this message does not always arrive.. See above.
 		} else if (msg.sender==255 && mGetCommand(msg)==C_INTERNAL && msg.type==I_ID_REQUEST) {
@@ -264,7 +275,8 @@ Serial.println("msg is ack!");
 			mSetAck(msg,false);
 			msg.set((uint8_t)newNodeID);					//Payload
 			mSetVersion(msg, PROTOCOL_VERSION);
-			sendRoute(msg);
+			txBlink(1);
+			if (!sendRoute(msg)) errBlink(1);
 //			if (sendRoute(msg)) saveState(EEPROM_LATEST_NODE_ADDRESS,newNodeID);  // If send OK save to eeprom. DOES NOT ALWAYS RETURN 'OK'!?
 		} else if (mGetCommand(msg)!=0) {
 			if (mGetCommand(msg)==3) msg.type=msg.type+38;
@@ -296,6 +308,48 @@ Serial.println("msg is ack!");
 	}
 }
 
+boolean MyMQTT::isLedMode() {
+	return ledMode;
+}
+
+void MyMQTT::ledTimersInterrupt() {
+  if(countRx && countRx != 255) {
+    // switch led on
+    digitalWrite(pinRx, LOW);
+  } else if(!countRx) {
+     // switching off
+     digitalWrite(pinRx, HIGH);
+  }
+  if(countRx != 255) { countRx--; }
+
+  if(countTx && countTx != 255) {
+    // switch led on
+    digitalWrite(pinTx, LOW);
+  } else if(!countTx) {
+     // switching off
+     digitalWrite(pinTx, HIGH);
+  }
+  if(countTx != 255) { countTx--; }
+  if(countErr && countErr != 255) {
+    // switch led on
+    digitalWrite(pinEr, LOW);
+  } else if(!countErr) {
+     // switching off
+     digitalWrite(pinEr, HIGH);
+  }
+  if(countErr != 255) { countErr--; }
+}
+
+void MyMQTT::rxBlink(uint8_t cnt) {
+  if(countRx == 255) { countRx = cnt; }
+}
+void MyMQTT::txBlink(uint8_t cnt) {
+  if(countTx == 255) { countTx = cnt; }
+}
+void MyMQTT::errBlink(uint8_t cnt) {
+  if(countErr == 255) { countErr = cnt; }
+}
+
 char MyMQTT::strncpysType_retL(char *str, char index, char start) {
 	char c;
 	char l;

libraries/MySensors/MyMQTT.h

@@ -14,11 +14,10 @@ version 2 as published by the Free Software Foundation.
 
 #include "MySensor.h"
 
-
 ///////////////////////////////////////////////////////////////////////////////////
 
 #ifdef DEBUG
-#define TCPDUMP						// Dump TCP packages.
+#define TCPDUMP					// Dump TCP packages.
 #endif
 
 #define MQTT_FIRST_SENSORID	20  		// If you want manually configured nodes below this value.
@@ -54,17 +53,19 @@ version 2 as published by the Free Software Foundation.
 #define MQTTQOS1        (1 << 1)
 #define MQTTQOS2        (2 << 1)
 
+#define MyTestVar F("Test")
+
 class MyMQTT :
 public MySensor {
 public:
-	MyMQTT(uint8_t _cepin=9, uint8_t _cspin=10);
+	MyMQTT(uint8_t _cepin=5, uint8_t _cspin=6, uint8_t _rx=NULL, uint8_t _tx=NULL, uint8_t _er=NULL);
-
 	void begin(rf24_pa_dbm_e paLevel=RF24_PA_LEVEL_GW, uint8_t channel=RF24_CHANNEL, rf24_datarate_e dataRate=RF24_DATARATE, void (*dataCallback)(char *, int *)=NULL);
 	void processRadioMessage();
 	void processMQTTMessage(char *inputString, int inputPos);
-	
+	boolean isLedMode();
+	void ledTimersInterrupt();
 private:
-	bool MQTTClient;
+	bool MQTTClientConnected;
 	char buffer[MQTT_MAX_PACKET_SIZE];
 	int buffsize;
 	char convBuf[MAX_PAYLOAD*2+1];
@@ -72,9 +73,18 @@ private:
 	void (*dataCallback)(char *, int *);
 	void SendMQTT(MyMessage &msg);
 	char strncpysType_retL(char *str, char index, char start);
+
+	volatile uint8_t countRx;
+	volatile uint8_t countTx;
+	volatile uint8_t countErr;
+	uint8_t pinRx;
+	uint8_t pinTx;
+	uint8_t pinEr;
+	boolean ledMode;
+	void ledTimers();
+	void rxBlink(uint8_t cnt);
+	void txBlink(uint8_t cnt);
+	void errBlink(uint8_t cnt);
 };
 
-
-
 #endif
-