Move master branch from from mios git repo
This commit is contained in:
hek
@@ -0,0 +1,206 @@
|
||||
PROJECT_NAME = $(PWD:B) ;
|
||||
PROJECT_DIR = . ;
|
||||
PROJECT_LIBS = SPI RF24 ;
|
||||
|
||||
OUT_DIR = ojam ;
|
||||
F_CPU = 16000000 ;
|
||||
MCU = atmega328p ;
|
||||
PORTS = /dev/tty.usbserial-A600eHIs /dev/tty.usbserial-A40081RP /dev/tty.usbserial-A9007LmI ;
|
||||
|
||||
UPLOAD_RATE = 57600 ;
|
||||
AVRDUDE_PROTOCOL = stk500v1 ;
|
||||
COM = 33 ;
|
||||
|
||||
# Host-specific overrides for locations
|
||||
if $(OS) = MACOSX
|
||||
{
|
||||
ARDUINO_VERSION = 22 ;
|
||||
OLD_DIR = /opt/arduino-0021 ;
|
||||
AVR_TOOLS_PATH = $(OLD_DIR)/hardware/tools/avr/bin ;
|
||||
AVRDUDECONFIG_PATH = $(OLD_DIR)/hardware/tools/avr/etc ;
|
||||
ARDUINO_DIR = /opt/Arduino ;
|
||||
ARDUINO_AVR = /usr/lib/avr/include ;
|
||||
}
|
||||
|
||||
# Where is everything?
|
||||
ARDUINO_VERSION ?= 22 ;
|
||||
AVR_TOOLS_PATH ?= /usr/bin ;
|
||||
ARDUINO_DIR ?= /opt/arduino-00$(ARDUINO_VERSION) ;
|
||||
ARDUINO_AVR ?= $(ARDUINO_DIR)/hardware/tools/avr/avr/include/avr ;
|
||||
AVRDUDECONFIG_PATH ?= $(ARDUINO_DIR)/hardware/tools ;
|
||||
ARDUINO_CORE = $(ARDUINO_DIR)/hardware/arduino/cores/arduino ;
|
||||
ARDUINO_LIB = $(ARDUINO_DIR)/libraries ;
|
||||
SKETCH_LIB = $(HOME)/Source/Arduino/libraries ;
|
||||
AVR_CC = $(AVR_TOOLS_PATH)/avr-gcc ;
|
||||
AVR_CXX = $(AVR_TOOLS_PATH)/avr-g++ ;
|
||||
AVR_LD = $(AVR_TOOLS_PATH)/avr-gcc ;
|
||||
AVR_OBJCOPY = $(AVR_TOOLS_PATH)/avr-objcopy ;
|
||||
AVRDUDE = $(AVR_TOOLS_PATH)/avrdude ;
|
||||
|
||||
DEFINES = F_CPU=$(F_CPU)L ARDUINO=$(ARDUINO_VERSION) VERSION_H ;
|
||||
CTUNING = -ffunction-sections -fdata-sections ;
|
||||
CXXTUNING = -fno-exceptions -fno-strict-aliasing ;
|
||||
CFLAGS = -Os -Werror -Wall -Wextra -mmcu=$(MCU) $(CTUNING) ;
|
||||
CXXFLAGS = $(CFLAGS) $(CXXTUNING) ;
|
||||
LDFLAGS = -Os -lm -Wl,--gc-sections -mmcu=atmega328p ;
|
||||
|
||||
# Search everywhere for headers
|
||||
HDRS = $(PROJECT_DIR) $(ARDUINO_AVR) $(ARDUINO_CORE) [ GLOB $(ARDUINO_LIB) $(SKETCH_LIB) : [^.]* ] ;
|
||||
|
||||
# Grab everything from the core directory
|
||||
CORE_MODULES = [ GLOB $(ARDUINO_CORE) : *.c *.cpp ] ;
|
||||
|
||||
# Grab everything from libraries. To avoid this "grab everything" behaviour, you
|
||||
# can specify specific modules to pick up in PROJECT_MODULES
|
||||
LIB_MODULES = [ GLOB $(ARDUINO_LIB)/$(PROJECT_LIBS) $(SKETCH_LIB)/$(PROJECT_LIBS) : *.cpp ] ;
|
||||
|
||||
# In addition to explicitly-specified program modules, pick up anything from the current
|
||||
# dir.
|
||||
PROJECT_MODULES += [ GLOB $(PROJECT_DIR) : *.c *.cpp *.pde ] ;
|
||||
|
||||
# Shortcut for the out files
|
||||
OUT = $(OUT_DIR)/$(PROJECT_NAME) ;
|
||||
|
||||
# AvrDude setup
|
||||
AVRDUDE_FLAGS = -V -F -D -C $(AVRDUDECONFIG_PATH)/avrdude.conf -p $(MCU) -c $(AVRDUDE_PROTOCOL) -b $(UPLOAD_RATE) ;
|
||||
|
||||
rule GitVersion
|
||||
{
|
||||
Always $(<) ;
|
||||
Depends all : $(<) ;
|
||||
}
|
||||
|
||||
actions GitVersion
|
||||
{
|
||||
echo "const char program_version[] = \"\\" > $(<)
|
||||
git log -1 --pretty=format:%h >> $(<)
|
||||
echo "\";" >> $(<)
|
||||
}
|
||||
|
||||
GitVersion version.h ;
|
||||
|
||||
rule AvrCc
|
||||
{
|
||||
Depends $(<) : $(>) ;
|
||||
Depends $(<) : $(<:D) ;
|
||||
Clean clean : $(<) ;
|
||||
|
||||
CCHDRS on $(<) = [ on $(<) FIncludes $(HDRS) ] ;
|
||||
CCDEFS on $(<) = [ on $(<) FDefines $(DEFINES) ] ;
|
||||
}
|
||||
|
||||
actions AvrCc
|
||||
{
|
||||
$(AVR_CC) -c -o $(<) $(CCHDRS) $(CCDEFS) $(CFLAGS) $(>)
|
||||
}
|
||||
|
||||
rule AvrC++
|
||||
{
|
||||
Depends $(<) : $(>) ;
|
||||
Depends $(<) : $(<:D) ;
|
||||
Clean clean : $(<) ;
|
||||
|
||||
CCHDRS on $(<) = [ on $(<) FIncludes $(HDRS) ] ;
|
||||
CCDEFS on $(<) = [ on $(<) FDefines $(DEFINES) ] ;
|
||||
}
|
||||
|
||||
actions AvrC++
|
||||
{
|
||||
$(AVR_CXX) -c -o $(<) $(CCHDRS) $(CCDEFS) $(CXXFLAGS) $(>)
|
||||
}
|
||||
|
||||
rule Pde
|
||||
{
|
||||
Depends $(<) : $(>) ;
|
||||
Depends $(<) : $(<:D) ;
|
||||
Clean clean : $(<) ;
|
||||
|
||||
}
|
||||
|
||||
actions Pde
|
||||
{
|
||||
echo "#include <WProgram.h>" > $(<)
|
||||
echo "#line 1 \"$(>)\"" >> $(<)
|
||||
cat $(>) >> $(<)
|
||||
}
|
||||
|
||||
rule AvrPde
|
||||
{
|
||||
local _CPP = $(OUT_DIR)/$(_I:B).cpp ;
|
||||
Pde $(_CPP) : $(>) ;
|
||||
AvrC++ $(<) : $(_CPP) ;
|
||||
}
|
||||
|
||||
rule AvrObject
|
||||
{
|
||||
switch $(>:S)
|
||||
{
|
||||
case .c : AvrCc $(<) : $(>) ;
|
||||
case .cpp : AvrC++ $(<) : $(>) ;
|
||||
case .pde : AvrPde $(<) : $(>) ;
|
||||
}
|
||||
}
|
||||
|
||||
rule AvrObjects
|
||||
{
|
||||
for _I in $(<)
|
||||
{
|
||||
AvrObject $(OUT_DIR)/$(_I:B).o : $(_I) ;
|
||||
}
|
||||
}
|
||||
|
||||
rule AvrMainFromObjects
|
||||
{
|
||||
Depends $(<) : $(>) ;
|
||||
Depends $(<) : $(<:D) ;
|
||||
MkDir $(<:D) ;
|
||||
Depends all : $(<) ;
|
||||
Clean clean : $(<) ;
|
||||
}
|
||||
|
||||
actions AvrMainFromObjects
|
||||
{
|
||||
$(AVR_LD) $(LDFLAGS) -o $(<) $(>)
|
||||
}
|
||||
|
||||
rule AvrMain
|
||||
{
|
||||
AvrMainFromObjects $(<) : $(OUT_DIR)/$(>:B).o ;
|
||||
AvrObjects $(>) ;
|
||||
}
|
||||
|
||||
rule AvrHex
|
||||
{
|
||||
Depends $(<) : $(>) ;
|
||||
Depends $(<) : $(<:D) ;
|
||||
Depends hex : $(<) ;
|
||||
Clean clean : $(<) ;
|
||||
}
|
||||
|
||||
actions AvrHex
|
||||
{
|
||||
$(AVR_OBJCOPY) -O ihex -R .eeprom $(>) $(<)
|
||||
}
|
||||
|
||||
rule AvrUpload
|
||||
{
|
||||
Depends $(1) : $(2) ;
|
||||
Depends $(2) : $(3) ;
|
||||
NotFile $(1) ;
|
||||
Always $(1) ;
|
||||
Always $(2) ;
|
||||
AvrUploadAction $(2) : $(3) ;
|
||||
}
|
||||
|
||||
actions AvrUploadAction
|
||||
{
|
||||
$(AVRDUDE) $(AVRDUDE_FLAGS) -P $(<) $(AVRDUDE_WRITE_FLASH) -U flash:w:$(>):i
|
||||
}
|
||||
|
||||
AvrMain $(OUT).elf : $(CORE_MODULES) $(LIB_MODULES) $(PROJECT_MODULES) ;
|
||||
AvrHex $(OUT).hex : $(OUT).elf ;
|
||||
|
||||
AvrUpload p6 : /dev/tty.usbserial-A600eHIs : $(OUT).hex ;
|
||||
AvrUpload p4 : /dev/tty.usbserial-A40081RP : $(OUT).hex ;
|
||||
AvrUpload p9 : /dev/tty.usbserial-A9007LmI : $(OUT).hex ;
|
||||
|
||||
@@ -0,0 +1,395 @@
|
||||
/*
|
||||
Copyright (C) 2011 James Coliz, Jr. <maniacbug@ymail.com>
|
||||
|
||||
This program is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU General Public License
|
||||
version 2 as published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
/**
|
||||
* Full test on single RF pair
|
||||
*
|
||||
* This sketches uses as many RF24 methods as possible in a single test.
|
||||
*
|
||||
* To operate:
|
||||
* Upload this sketch on two nodes, each with IRQ -> pin 2
|
||||
* One node needs pin 7 -> GND, the other NC. That's the receiving node
|
||||
* Monitor the sending node's serial output
|
||||
* Look for "+OK PASS" or "+OK FAIL"
|
||||
*/
|
||||
|
||||
#include <SPI.h>
|
||||
#include "RF24.h"
|
||||
#include "printf.h"
|
||||
|
||||
//
|
||||
// Hardware configuration
|
||||
//
|
||||
|
||||
// Set up nRF24L01 radio on SPI bus plus pins 8 & 9
|
||||
|
||||
RF24 radio(8,9);
|
||||
|
||||
// sets the role of this unit in hardware. Connect to GND to be the 'pong' receiver
|
||||
// Leave open to be the 'ping' transmitter
|
||||
const short role_pin = 7;
|
||||
|
||||
//
|
||||
// Topology
|
||||
//
|
||||
|
||||
// Single radio pipe address for the 2 nodes to communicate.
|
||||
const uint64_t pipe = 0xE8E8F0F0E1LL;
|
||||
|
||||
//
|
||||
// Role management
|
||||
//
|
||||
// Set up role. This sketch uses the same software for all the nodes in this
|
||||
// system. Doing so greatly simplifies testing. The hardware itself specifies
|
||||
// which node it is.
|
||||
//
|
||||
// This is done through the role_pin
|
||||
//
|
||||
|
||||
// The various roles supported by this sketch
|
||||
typedef enum { role_sender = 1, role_receiver } role_e;
|
||||
|
||||
// The debug-friendly names of those roles
|
||||
const char* role_friendly_name[] = { "invalid", "Sender", "Receiver"};
|
||||
|
||||
// The role of the current running sketch
|
||||
role_e role;
|
||||
|
||||
// Interrupt handler, check the radio because we got an IRQ
|
||||
void check_radio(void);
|
||||
|
||||
//
|
||||
// Payload
|
||||
//
|
||||
|
||||
const int min_payload_size = 4;
|
||||
const int max_payload_size = 32;
|
||||
int payload_size_increments_by = 2;
|
||||
int next_payload_size = min_payload_size;
|
||||
|
||||
char receive_payload[max_payload_size+1]; // +1 to allow room for a terminating NULL char
|
||||
|
||||
//
|
||||
// Test state
|
||||
//
|
||||
|
||||
bool done; //*< Are we done with the test? */
|
||||
bool passed; //*< Have we passed the test? */
|
||||
bool notified; //*< Have we notified the user we're done? */
|
||||
const int num_needed = 10; //*< How many success/failures until we're done? */
|
||||
int receives_remaining = num_needed; //*< How many ack packets until we declare victory? */
|
||||
int failures_remaining = num_needed; //*< How many more failed sends until we declare failure? */
|
||||
int interval = 100; //*< ms to wait between sends */
|
||||
|
||||
char configuration = '1'; //*< Configuration key, one char sent in by the test framework to tell us how to configure, this is the default */
|
||||
|
||||
void one_ok(void)
|
||||
{
|
||||
// Have we received enough yet?
|
||||
if ( ! --receives_remaining )
|
||||
{
|
||||
done = true;
|
||||
passed = true;
|
||||
}
|
||||
}
|
||||
|
||||
void one_failed(void)
|
||||
{
|
||||
// Have we failed enough yet?
|
||||
if ( ! --failures_remaining )
|
||||
{
|
||||
done = true;
|
||||
passed = false;
|
||||
}
|
||||
}
|
||||
|
||||
//
|
||||
// Setup
|
||||
//
|
||||
|
||||
void setup(void)
|
||||
{
|
||||
//
|
||||
// Role
|
||||
//
|
||||
|
||||
// set up the role pin
|
||||
pinMode(role_pin, INPUT);
|
||||
digitalWrite(role_pin,HIGH);
|
||||
delay(20); // Just to get a solid reading on the role pin
|
||||
|
||||
// read the address pin, establish our role
|
||||
if ( digitalRead(role_pin) )
|
||||
role = role_sender;
|
||||
else
|
||||
role = role_receiver;
|
||||
|
||||
//
|
||||
// Print preamble
|
||||
//
|
||||
|
||||
Serial.begin(57600);
|
||||
printf_begin();
|
||||
printf("\n\rRF24/tests/pingpair_test/\n\r");
|
||||
printf("ROLE: %s\n\r",role_friendly_name[role]);
|
||||
|
||||
//
|
||||
// Read configuration from serial
|
||||
//
|
||||
// It would be a much better test if this program could accept configuration
|
||||
// from the serial port. Then it would be possible to run the same test under
|
||||
// lots of different circumstances.
|
||||
//
|
||||
// The idea is that we will print "+READY" at this point. The python script
|
||||
// will wait for it, and then send down a configuration script that we
|
||||
// execute here and then run with.
|
||||
//
|
||||
// The test controller will need to configure the receiver first, then go run
|
||||
// the test on the sender.
|
||||
//
|
||||
|
||||
printf("+READY press any key to start\n\r\n\r");
|
||||
|
||||
while (! Serial.available() ) {}
|
||||
configuration = Serial.read();
|
||||
printf("Configuration\t = %c\n\r",configuration);
|
||||
|
||||
//
|
||||
// Setup and configure rf radio
|
||||
//
|
||||
|
||||
radio.begin();
|
||||
|
||||
// We will be using the Ack Payload feature, so please enable it
|
||||
radio.enableAckPayload();
|
||||
|
||||
// Config 2 is special radio config
|
||||
if (configuration=='2')
|
||||
{
|
||||
radio.setCRCLength(RF24_CRC_8);
|
||||
radio.setDataRate(RF24_250KBPS);
|
||||
radio.setChannel(10);
|
||||
}
|
||||
else
|
||||
{
|
||||
//Otherwise, default radio config
|
||||
|
||||
// Optional: Increase CRC length for improved reliability
|
||||
radio.setCRCLength(RF24_CRC_16);
|
||||
|
||||
// Optional: Decrease data rate for improved reliability
|
||||
radio.setDataRate(RF24_1MBPS);
|
||||
|
||||
// Optional: Pick a high channel
|
||||
radio.setChannel(90);
|
||||
}
|
||||
|
||||
// Config 3 is static payloads only
|
||||
if (configuration == '3')
|
||||
{
|
||||
next_payload_size = 16;
|
||||
payload_size_increments_by = 0;
|
||||
radio.setPayloadSize(next_payload_size);
|
||||
}
|
||||
else
|
||||
{
|
||||
// enable dynamic payloads
|
||||
radio.enableDynamicPayloads();
|
||||
}
|
||||
|
||||
//
|
||||
// Open pipes to other nodes for communication
|
||||
//
|
||||
|
||||
// This simple sketch opens a single pipe for these two nodes to communicate
|
||||
// back and forth. One listens on it, the other talks to it.
|
||||
|
||||
if ( role == role_sender )
|
||||
{
|
||||
radio.openWritingPipe(pipe);
|
||||
}
|
||||
else
|
||||
{
|
||||
radio.openReadingPipe(1,pipe);
|
||||
}
|
||||
|
||||
//
|
||||
// Start listening
|
||||
//
|
||||
|
||||
if ( role == role_receiver )
|
||||
radio.startListening();
|
||||
|
||||
//
|
||||
// Dump the configuration of the rf unit for debugging
|
||||
//
|
||||
radio.printDetails();
|
||||
|
||||
//
|
||||
// Attach interrupt handler to interrupt #0 (using pin 2)
|
||||
// on BOTH the sender and receiver
|
||||
//
|
||||
delay(40) ;
|
||||
attachInterrupt(0, check_radio, FALLING);
|
||||
}
|
||||
|
||||
//
|
||||
// Loop
|
||||
//
|
||||
|
||||
static uint32_t message_count = 0;
|
||||
static uint32_t last_message_count = 0;
|
||||
|
||||
void loop(void)
|
||||
{
|
||||
//
|
||||
// Sender role. Repeatedly send the current time
|
||||
//
|
||||
|
||||
if (role == role_sender && !done)
|
||||
{
|
||||
// The payload will always be the same, what will change is how much of it we send.
|
||||
static char send_payload[] = "ABCDEFGHIJKLMNOPQRSTUVWXYZ789012";
|
||||
|
||||
// First, stop listening so we can talk.
|
||||
radio.stopListening();
|
||||
|
||||
// Send it. This will block until complete
|
||||
radio.powerUp() ;
|
||||
printf("\n\rNow sending length %i...",next_payload_size);
|
||||
radio.startWrite( send_payload, next_payload_size );
|
||||
|
||||
// Update size for next time.
|
||||
next_payload_size += payload_size_increments_by;
|
||||
if ( next_payload_size > max_payload_size )
|
||||
next_payload_size = min_payload_size;
|
||||
|
||||
// Try again soon
|
||||
interval = 1 + (radio.getMaxTimeout()/1000) ;
|
||||
delay(interval);
|
||||
|
||||
// Timeout if we have not received anything back ever
|
||||
if ( ! last_message_count && millis() > interval * 10 )
|
||||
{
|
||||
printf("No responses received. Are interrupts connected??\n\r");
|
||||
done = true;
|
||||
}
|
||||
}
|
||||
|
||||
//
|
||||
// Receiver role: Does nothing! All the work is in IRQ
|
||||
//
|
||||
|
||||
//
|
||||
// Stop the test if we're done and report results
|
||||
//
|
||||
if ( done && ! notified )
|
||||
{
|
||||
notified = true;
|
||||
|
||||
printf("\n\r+OK ");
|
||||
if ( passed )
|
||||
printf("PASS\n\r\n\r");
|
||||
else
|
||||
printf("FAIL\n\r\n\r");
|
||||
}
|
||||
|
||||
//
|
||||
//
|
||||
}
|
||||
|
||||
void check_radio(void)
|
||||
{
|
||||
// What happened?
|
||||
bool tx,fail,rx;
|
||||
radio.whatHappened(tx,fail,rx);
|
||||
|
||||
// Have we successfully transmitted?
|
||||
if ( tx )
|
||||
{
|
||||
if ( role == role_sender )
|
||||
printf("Send:OK ");
|
||||
|
||||
if ( role == role_receiver )
|
||||
printf("Ack Payload:Sent\n\r");
|
||||
}
|
||||
|
||||
// Have we failed to transmit?
|
||||
if ( fail )
|
||||
{
|
||||
if ( role == role_sender )
|
||||
{
|
||||
printf("Send:Failed ");
|
||||
|
||||
// log status of this line
|
||||
one_failed();
|
||||
}
|
||||
|
||||
if ( role == role_receiver )
|
||||
printf("Ack Payload:Failed\n\r");
|
||||
}
|
||||
|
||||
// Transmitter can power down for now, because
|
||||
// the transmission is done.
|
||||
if ( ( tx || fail ) && ( role == role_sender ) )
|
||||
radio.powerDown();
|
||||
|
||||
// Did we receive a message?
|
||||
if ( rx )
|
||||
{
|
||||
// If we're the sender, we've received an ack payload
|
||||
if ( role == role_sender )
|
||||
{
|
||||
radio.read(&message_count,sizeof(message_count));
|
||||
printf("Ack:%lu ",message_count);
|
||||
|
||||
// is this ack what we were expecting? to account
|
||||
// for failures, we simply want to make sure we get a
|
||||
// DIFFERENT ack every time.
|
||||
if ( ( message_count != last_message_count ) || ( configuration=='3' && message_count == 16 ) )
|
||||
{
|
||||
printf("OK ");
|
||||
one_ok();
|
||||
}
|
||||
else
|
||||
{
|
||||
printf("FAILED ");
|
||||
one_failed();
|
||||
}
|
||||
last_message_count = message_count;
|
||||
}
|
||||
|
||||
// If we're the receiver, we've received a time message
|
||||
if ( role == role_receiver )
|
||||
{
|
||||
// Get this payload and dump it
|
||||
size_t len = max_payload_size;
|
||||
memset(receive_payload,0,max_payload_size);
|
||||
|
||||
if ( configuration == '3' )
|
||||
len = next_payload_size;
|
||||
else
|
||||
len = radio.getDynamicPayloadSize();
|
||||
|
||||
radio.read( receive_payload, len );
|
||||
|
||||
// Put a zero at the end for easy printing
|
||||
receive_payload[len] = 0;
|
||||
|
||||
// Spew it
|
||||
printf("Got payload size=%i value=%s strlen=%u\n\r",len,receive_payload,strlen(receive_payload));
|
||||
|
||||
// Add an ack packet for the next time around.
|
||||
// Here we will report back how many bytes we got this time.
|
||||
radio.writeAckPayload( 1, &len, sizeof(len) );
|
||||
++message_count;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
// vim:ai:cin:sts=2 sw=2 ft=cpp
|
||||
@@ -0,0 +1,31 @@
|
||||
/*
|
||||
Copyright (C) 2011 James Coliz, Jr. <maniacbug@ymail.com>
|
||||
|
||||
This program is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU General Public License
|
||||
version 2 as published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file printf.h
|
||||
*
|
||||
* Setup necessary to direct stdout to the Arduino Serial library, which
|
||||
* enables 'printf'
|
||||
*/
|
||||
|
||||
#ifndef __PRINTF_H__
|
||||
#define __PRINTF_H__
|
||||
|
||||
int serial_putc( char c, FILE * )
|
||||
{
|
||||
Serial.write( c );
|
||||
|
||||
return c;
|
||||
}
|
||||
|
||||
void printf_begin(void)
|
||||
{
|
||||
fdevopen( &serial_putc, 0 );
|
||||
}
|
||||
|
||||
#endif // __PRINTF_H__
|
||||
@@ -0,0 +1,25 @@
|
||||
#!/opt/local/bin/python
|
||||
|
||||
import sys,serial
|
||||
|
||||
def read_until(token):
|
||||
while 1:
|
||||
line = ser.readline(None,"\r")
|
||||
sys.stdout.write(line)
|
||||
|
||||
if (line.startswith(token)):
|
||||
break
|
||||
return line
|
||||
|
||||
|
||||
ser = serial.Serial(sys.argv[1], 57600, timeout=5, dsrdtr=False, rtscts=False)
|
||||
|
||||
read_until("+READY")
|
||||
ser.write(sys.argv[2])
|
||||
|
||||
line = read_until("+OK")
|
||||
ser.close()
|
||||
if (line.find("PASS") != -1):
|
||||
sys.exit(0)
|
||||
else:
|
||||
sys.exit(1)
|
||||
@@ -0,0 +1,16 @@
|
||||
#!/bin/sh
|
||||
|
||||
# Connect p6 to receiver, p4 to sender
|
||||
# WARNING: Test config 2 only works with PLUS units.
|
||||
|
||||
jam p4 p6 || exit 1
|
||||
./runtest.py /dev/tty.usbserial-A600eHIs 1 &
|
||||
./runtest.py /dev/tty.usbserial-A40081RP 1 || ( kill `jobs -p` && exit 1 )
|
||||
kill `jobs -p`
|
||||
./runtest.py /dev/tty.usbserial-A600eHIs 2 &
|
||||
./runtest.py /dev/tty.usbserial-A40081RP 2 || ( kill `jobs -p` && exit 1 )
|
||||
kill `jobs -p`
|
||||
./runtest.py /dev/tty.usbserial-A600eHIs 3 &
|
||||
./runtest.py /dev/tty.usbserial-A40081RP 3 || ( kill `jobs -p` && exit 1 )
|
||||
kill `jobs -p`
|
||||
exit 0
|
||||
@@ -0,0 +1,11 @@
|
||||
#/usr/bin/expect
|
||||
|
||||
set timeout 100
|
||||
spawn picocom -b 57600 /dev/ttyUSB0
|
||||
expect "+READY"
|
||||
send [lindex $argv 0]
|
||||
expect "+OK"
|
||||
spawn picocom -b 57600 /dev/ttyUSB1
|
||||
expect "+READY"
|
||||
send [lindex $argv 0]
|
||||
expect "+OK"
|
||||
Reference in New Issue
Block a user