Move master branch from from mios git repo

libraries/RemoteSensor/examples/ThermoHygroReceiver/ThermoHygroReceiver.ino

@@ -0,0 +1,54 @@
+/*
+ * This sketch receives and decodes data from a 433MHz thermo/hygro weather sensor.
+ * The received data (temperature, humidity, channel) is echo
+ *
+ * Setup:
+ * - Connect digital output of a 433MHz receiver to digital pin 2 of Arduino
+ * - Enable the serial monitor at 115200 baud. 
+ *
+ */
+
+#include <SensorReceiver.h>
+
+void setup() {
+  Serial.begin(115200);
+
+  // Init the receiver on interrupt pin 0 (digital pin 2).
+  // Set the callback to function "showTempHumi", which is called
+  // whenever valid sensor data has been received.
+  SensorReceiver::init(0, showTempHumi);
+}
+
+void loop() {
+  // Empty! However, you can do other stuff here if you like.
+}
+
+void showTempHumi(byte *data) {
+  // is data a ThermoHygro-device?
+  if ((data[3] & 0x1f) == 0x1e) {
+    // Yes!
+
+    byte channel, randomId;
+    int temp;
+    byte humidity;
+
+    // Decode the data
+    SensorReceiver::decodeThermoHygro(data, channel, randomId, temp, humidity);
+
+    // Print temperature. Note: temp is 10x the actual temperature!
+    Serial.print("Temperature: ");
+    Serial.print(temp / 10); // units
+    Serial.print('.');
+    Serial.print(temp % 10); // decimal
+
+    // Print humidity
+    Serial.print(" deg, Humidity: ");
+    Serial.print(humidity);
+    Serial.print("% REL");
+
+    // Print channel
+    Serial.print(", Channel: ");
+    Serial.println(channel, DEC);   
+  }
+}
+