Move master branch from from mios git repo

2014-01-23 00:23:15 +01:00
commit 609d9e5be9
352 changed files with 53418 additions and 0 deletions
@@ -0,0 +1,73 @@
+Name    : Sleep_n0m1 Library                         
+Author  : Noah Shibley, Michael Grant, NoMi Design Ltd. http://n0m1.com                       
+Date    : July 10th 2011                                    
+Version : 0.1                                              
+Notes   : Arduino Library to place the arduino into sleep mode for 
+          a specific length of time, or a specific number of sleep cycles 
+          Some of this code comes from "Cloudy" on the arduino forum
+	      http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1292898715   
+	 
+	  Refer to the examples for how to use this library.  
+			
+Dependencies:	
+	none
+	
+	
+			
+List of Functions:
+
+Function: idleMode
+Description: sets the Arduino into idle Mode sleep, 
+the least power saving, The idle mode stops the MCU
+but leaves peripherals and timers running. 
+------------------------------------------------------	
+Function: adcMode
+Description: sets the Arduino into adc Mode sleep, 
+This mode makes the MCU enter ADC Noise Reduction mode,
+stopping the CPU but allowing the ADC, the external interrupts,
+the 2-wire Serial Interface address watch, Timer/Counter2
+and the Watchdog to continue operating
+------------------------------------------------------
+Function: pwrSaveMode
+Description: sets the Arduino into power Save Mode sleep,
+The timer crystal will continue to operate in this mode, 
+Timer2 still active.
+------------------------------------------------------
+Function: extStandbyMode
+Description: sets the Arduino into extStandby Mode sleep,
+This mode is identical to Power-save with the exception
+that the Oscillator is kept running for fast wake up
+------------------------------------------------------ 
+Function: standbyMode
+Description: sets the Arduino into standby Mode sleep,
+This mode is identical to Power-down with the exception
+that the Oscillator is kept running for fast wake up
+------------------------------------------------------
+Function: pwrDownMode
+Description: sets the Arduino into power Down Mode sleep,
+The most power saving, all systems are powered down 
+except the watch dog timer and external reset
+------------------------------------------------------
+Function: sleepDelay
+Description: Works like the Arduino delay function, sets the
+Arduino into sleep mode for a specified time.
+Parameters: (unsigned long) time in ms of the sleep cycle
+------------------------------------------------------  
+Function: sleepDelay
+Description: Works like the Arduino delay function, sets the
+Arduino into sleep mode for a specified time.
+Parameters: (unsigned long) time in ms of the sleep cycle
+            (boolean) prevents the Arduino from entering sleep
+------------------------------------------------------
+Function: setCalibrationInterval
+Description: the WDT needs to be calibrated against timer 0 
+periodically to keep the sleep time accurate. Default calibration
+occurs every 100 wake/sleep cycles. recalibrate too often will
+waste power and too rarely will make the sleep time inaccurate. 
+Parameters: (int) set the # of wake/sleep cycles between calibrations
+------------------------------------------------------
+Function: sleepInterrupt
+Description: set the Arduino into sleep mode until an interrupt is
+triggered. The interrupts are passed in as parameters
+Parameters: (int) interrupt value, 0, 1, etc, see attachinterrupt()
+	    (int) mode of trigger, LOW,RISING,FALLING,CHANGE