diff --git a/libraries/MySensors/examples/MockMySensors/MockMySensors.ino b/libraries/MySensors/examples/MockMySensors/MockMySensors.ino index db15a6b..c88a700 100644 --- a/libraries/MySensors/examples/MockMySensors/MockMySensors.ino +++ b/libraries/MySensors/examples/MockMySensors/MockMySensors.ino @@ -42,36 +42,49 @@ // Some of these ID's have not been updated for v1.5. Uncommenting too many of them // will make the sketch too large for a pro mini's memory so it's probably best to try // one at a time. -//#define ID_S_ARMED 0 // dummy to controll armed stated for several sensors -//#define ID_S_DOOR 1 -//#define ID_S_MOTION 2 -//#define ID_S_SMOKE 3 -//#define ID_S_LIGHT 4 -//#define ID_S_DIMMER 5 -//#define ID_S_COVER 6 -//#define ID_S_TEMP 7 -//#define ID_S_HUM 8 -//#define ID_S_BARO 9 -//#define ID_S_WIND 10 -//#define ID_S_RAIN 11 -//#define ID_S_UV 12 -//#define ID_S_WEIGHT 13 -//#define ID_S_POWER 14 -//#define ID_S_HEATER 15 -//#define ID_S_DISTANCE 16 -//#define ID_S_LIGHT_LEVEL 17 -//#define ID_S_LOCK 18 -//#define ID_S_IR 19 -//#define ID_S_WATER 20 -//#define ID_S_AIR_QUALITY 21 -//#define ID_S_DUST 22 -//#define ID_S_SCENE_CONTROLLER 23 -#define ID_S_MOISTURE 24 -//#define ID_S_CUSTOM 99 +#define ID_S_ARMED 0 // dummy to controll armed stated for several sensors +#define ID_S_DOOR 1 +//#define ID_S_MOTION 2 +//#define ID_S_SMOKE 3 +//#define ID_S_LIGHT 4 +//#define ID_S_DIMMER 5 +//#define ID_S_COVER 6 +//#define ID_S_TEMP 7 +//#define ID_S_HUM 8 +//#define ID_S_BARO 9 +//#define ID_S_WIND 10 +//#define ID_S_RAIN 11 +//#define ID_S_UV 12 +//#define ID_S_WEIGHT 13 +//#define ID_S_POWER 14 +//#define ID_S_HEATER 15 +//#define ID_S_DISTANCE 16 +//#define ID_S_LIGHT_LEVEL 17 +//#define ID_S_LOCK 18 +//#define ID_S_IR 19 +//#define ID_S_WATER 20 +//#define ID_S_AIR_QUALITY 21 +//#define ID_S_DUST 22 +//#define ID_S_SCENE_CONTROLLER 23 +//// Lib 1.5 sensors +//#define ID_S_RGB_LIGHT 24 +//#define ID_S_RGBW_LIGHT 25 +//#define ID_S_COLOR_SENSOR 26 +//#define ID_S_HVAC 27 +//#define ID_S_MULTIMETER 28 +//#define ID_S_SPRINKLER 29 +//#define ID_S_WATER_LEAK 30 +//#define ID_S_SOUND 31 +//#define ID_S_VIBRATION 32 +//#define ID_S_MOISTURE 33 +// +//#define ID_S_CUSTOM 99 + + // Global Vars -unsigned long SLEEP_TIME = 300000; // Sleep time between reads (in milliseconds) +unsigned long SLEEP_TIME = 900000; // Sleep time between reads (in milliseconds) boolean metric = true; long randNumber; @@ -132,7 +145,8 @@ MyHwATMega328 hw; MyMessage msg_S_COVER_U(ID_S_COVER,V_UP); MyMessage msg_S_COVER_D(ID_S_COVER,V_DOWN); MyMessage msg_S_COVER_S(ID_S_COVER,V_STOP); - const char* coverVal = "V_STOP"; //compiler warnings + MyMessage msg_S_COVER_V(ID_S_COVER,V_VAR1); + int coverState=0; //0=Stop; 1=up; -1=down #endif #ifdef ID_S_TEMP @@ -170,20 +184,31 @@ MyHwATMega328 hw; #ifdef ID_S_POWER MyMessage msg_S_POWER_W(ID_S_POWER,V_WATT); MyMessage msg_S_POWER_K(ID_S_POWER,V_KWH); -// MyMessage msg_S_POWER_I(ID_S_POWER,V_IMPEDANCE); -// MyMessage msg_S_POWER_V(ID_S_POWER,V_VOLTAGE); -// MyMessage msg_S_POWER_C(ID_S_POWER,V_CURRENT); #endif -#ifdef ID_S_HEATER //V_HVAC_SETPOINT_HEAT, V_HVAC_FLOW_STATE, V_TEMP, V_STATUS + +#ifdef ID_S_HEATER + + //////// REVIEW IMPLEMENTATION //////////// + + MyMessage msg_S_HEATER_SET_POINT(ID_S_HEATER,V_HVAC_SETPOINT_HEAT); // HVAC/Heater setpoint (Integer between 0-100). S_HEATER, S_HVAC + MyMessage msg_S_HEATER_FLOW_STATE(ID_S_HEATER,V_HVAC_FLOW_STATE); // Mode of header. One of "Off", "HeatOn", "CoolOn", or "AutoChangeOver" // S_HVAC, S_HEATER + + //MyMessage msg_S_HEATER_STATUS(ID_S_HEATER,V_STATUS); + //MyMessage msg_S_HEATER_TEMP(ID_S_HEATER,V_TEMP); + float heater_setpoint=21.5; - float heater_temp=23.5; - bool heater_status=false; - String heater_flow_state = "Off"; - MyMessage msg_S_HEATER_SETPOINT(ID_S_HEATER,V_HVAC_SETPOINT_HEAT); - MyMessage msg_S_HEATER_STATUS(ID_S_HEATER,V_STATUS); - MyMessage msg_S_HEATER_TEMP(ID_S_HEATER,V_TEMP); - MyMessage msg_S_HEATER_FLOWSTATE(ID_S_HEATER,V_HVAC_FLOW_STATE); + String heater_flow_state="Off"; + +// float heater_temp=23.5; +// bool heater_status=false; + + + // V_TEMP // Temperature + // V_STATUS // Binary status. 0=off 1=on + // V_HVAC_FLOW_STATE // Mode of header. One of "Off", "HeatOn", "CoolOn", or "AutoChangeOver" + // V_HVAC_SPEED // HVAC/Heater fan speed ("Min", "Normal", "Max", "Auto") + // V_HVAC_SETPOINT_HEAT // HVAC/Heater setpoint #endif #ifdef ID_S_DISTANCE @@ -202,7 +227,7 @@ MyHwATMega328 hw; #ifdef ID_S_IR MyMessage msg_S_IR_S(ID_S_IR,V_IR_SEND); MyMessage msg_S_IR_R(ID_S_IR,V_IR_RECEIVE); - const char* irVal = ""; + long irVal = 0; #endif #ifdef ID_S_WATER @@ -224,17 +249,91 @@ MyHwATMega328 hw; // not sure if scene controller sends int or chars // betting on ints as Touch Display Scen by Hek // compiler warnings char *scenes[] = { - "All off", - "Good Morning", - "Clean Up!", - "All Lights Off", - "Music On/Off" + (char *)"Good Morning", + (char *)"Clean Up!", + (char *)"All Lights Off", + (char *)"Music On/Off" }; + int sceneVal=0; int sceneValPrevious=0; #endif +#ifdef ID_S_RGB_LIGHT + MyMessage msg_S_RGB_LIGHT_V_RGB(ID_S_RGB_LIGHT,V_RGB); + MyMessage msg_S_RGB_LIGHT_V_WATT(ID_S_RGB_LIGHT,V_WATT); + String rgbState="000000"; + //RGB light V_RGB, V_WATT + //RGB value transmitted as ASCII hex string (I.e "ff0000" for red) +#endif + +#ifdef ID_S_RGBW_LIGHT + MyMessage msg_S_RGBW_LIGHT_V_RGBW(ID_S_RGBW_LIGHT,V_RGBW); + MyMessage msg_S_RGBW_LIGHT_V_WATT(ID_S_RGBW_LIGHT,V_WATT); + String rgbwState="00000000"; + //RGBW light (with separate white component) V_RGBW, V_WATT + //RGBW value transmitted as ASCII hex string (I.e "ff0000ff" for red + full white) S_RGBW_LIGHT +#endif + +#ifdef ID_S_COLOR_SENSOR + MyMessage msg_S_COLOR_SENSOR_V_RGB(ID_S_COLOR_SENSOR,V_RGB); + //Color sensor V_RGB + //RGB value transmitted as ASCII hex string (I.e "ff0000" for red) S_RGB_LIGHT, S_COLOR_SENSOR +#endif + +#ifdef ID_S_HVAC + MyMessage msg_S_HVAC_V_HVAC_SETPOINT_HEAT(ID_S_HVAC,V_HVAC_SETPOINT_HEAT); + MyMessage msg_S_HVAC_V_HVAC_SETPOINT_COOL(ID_S_HVAC,V_HVAC_SETPOINT_COOL); + MyMessage msg_S_HVAC_V_HVAC_FLOW_STATET(ID_S_HVAC,V_HVAC_FLOW_STATE); + MyMessage msg_S_HVAC_V_HVAC_FLOW_MODE(ID_S_HVAC,V_HVAC_FLOW_MODE); + MyMessage msg_S_HVAC_V_HVAC_SPEED(ID_S_HVAC,V_HVAC_SPEED); + + float hvac_SetPointHeat = 16.5; + float hvac_SetPointCool = 25.5; + String hvac_FlowState = "AutoChangeOver"; + String hvac_FlowMode = "Auto"; + String hvac_Speed = "Normal"; + + //Thermostat/HVAC device + //V_HVAC_SETPOINT_HEAT, // HVAC/Heater setpoint + //V_HVAC_SETPOINT_COOL, // HVAC cold setpoint + //V_HVAC_FLOW_STATE, // Mode of header. One of "Off", "HeatOn", "CoolOn", or "AutoChangeOver" + //V_HVAC_FLOW_MODE, // Flow mode for HVAC ("Auto", "ContinuousOn", "PeriodicOn") + //V_HVAC_SPEED // HVAC/Heater fan speed ("Min", "Normal", "Max", "Auto") + + // NOT IMPLEMENTED YET + //V_TEMP // Temperature + //V_STATUS // Binary status. 0=off 1=on +#endif + +#ifdef ID_S_MULTIMETER + MyMessage msg_S_MULTIMETER_V_IMPEDANCE(ID_S_MULTIMETER,V_IMPEDANCE); + MyMessage msg_S_MULTIMETER_V_VOLTAGE(ID_S_MULTIMETER,V_VOLTAGE); + MyMessage msg_S_MULTIMETER_V_CURRENT(ID_S_MULTIMETER,V_CURRENT); + + // Multimeter device V_VOLTAGE, V_CURRENT, V_IMPEDANCE + // V_IMPEDANCE 14 Impedance value + // V_VOLTAGE 38 Voltage level + // V_CURRENT 39 Current level +#endif + +#ifdef ID_S_SPRINKLER + // S_SPRINKLER 31 Sprinkler device V_STATUS (turn on/off), V_TRIPPED (if fire detecting device) + // V_STATUS 2 Binary status. 0=off 1=on + // V_ARMED 15 Armed status of a security sensor. 1=Armed, 0=Bypassed + // V_TRIPPED 16 Tripped status of a security sensor. 1=Tripped, 0=Untripped +#endif + +#ifdef ID_S_WATER_LEAK +#endif +#ifdef ID_S_SOUND +#endif +#ifdef ID_S_VIBRATION +#endif +#ifdef ID_S_MOISTURE +#endif + #ifdef ID_S_MOISTURE MyMessage msg_S_MOISTURE(ID_S_MOISTURE,V_LEVEL); #endif @@ -284,151 +383,192 @@ void setup() #ifdef ID_S_DOOR Serial.println(" S_DOOR"); - gw.present(ID_S_DOOR,S_DOOR); + gw.present(ID_S_DOOR,S_DOOR,"Outside Door"); gw.wait(SHORT_WAIT); #endif #ifdef ID_S_MOTION Serial.println(" S_MOTION"); - gw.present(ID_S_MOTION,S_MOTION); + gw.present(ID_S_MOTION,S_MOTION,"Outside Motion"); gw.wait(SHORT_WAIT); #endif #ifdef ID_S_SMOKE Serial.println(" S_SMOKE"); - gw.present(ID_S_SMOKE,S_SMOKE); + gw.present(ID_S_SMOKE,S_SMOKE,"Kitchen Smoke"); gw.wait(SHORT_WAIT); #endif #ifdef ID_S_LIGHT Serial.println(" S_LIGHT"); - gw.present(ID_S_LIGHT,S_LIGHT); + gw.present(ID_S_LIGHT,S_LIGHT,"Hall Light"); gw.wait(SHORT_WAIT); #endif #ifdef ID_S_DIMMER Serial.println(" S_DIMMER"); - gw.present(ID_S_DIMMER,S_DIMMER); + gw.present(ID_S_DIMMER,S_DIMMER,"Living room dimmer"); gw.wait(SHORT_WAIT); #endif #ifdef ID_S_COVER Serial.println(" S_COVER"); - gw.present(ID_S_COVER,S_COVER); + gw.present(ID_S_COVER,S_COVER,"Window cover"); gw.wait(SHORT_WAIT); #endif #ifdef ID_S_TEMP Serial.println(" S_TEMP"); - gw.present(ID_S_TEMP,S_TEMP); + gw.present(ID_S_TEMP,S_TEMP,"House Temperarue"); gw.wait(SHORT_WAIT); #endif #ifdef ID_S_HUM Serial.println(" S_HUM"); - gw.present(ID_S_HUM,S_HUM); + gw.present(ID_S_HUM,S_HUM,"Current Humidity"); gw.wait(SHORT_WAIT); #endif #ifdef ID_S_BARO Serial.println(" S_BARO"); - gw.present(ID_S_BARO,S_BARO); + gw.present(ID_S_BARO,S_BARO," Air pressure"); gw.wait(SHORT_WAIT); #endif #ifdef ID_S_WIND Serial.println(" S_WIND"); - gw.present(ID_S_WIND,S_WIND); + gw.present(ID_S_WIND,S_WIND,"Wind Station"); gw.wait(SHORT_WAIT); #endif #ifdef ID_S_RAIN Serial.println(" S_RAIN"); - gw.present(ID_S_RAIN,S_RAIN); + gw.present(ID_S_RAIN,S_RAIN,"Rain Station"); gw.wait(SHORT_WAIT); #endif #ifdef ID_S_UV Serial.println(" S_UV"); - gw.present(ID_S_UV,S_UV); + gw.present(ID_S_UV,S_UV,"Ultra Violet"); gw.wait(SHORT_WAIT); #endif #ifdef ID_S_WEIGHT Serial.println(" S_WEIGHT"); - gw.present(ID_S_WEIGHT,S_WEIGHT); + gw.present(ID_S_WEIGHT,S_WEIGHT,"Outdoor Scale"); gw.wait(SHORT_WAIT); #endif #ifdef ID_S_POWER Serial.println(" S_POWER"); - gw.present(ID_S_POWER,S_POWER); + gw.present(ID_S_POWER,S_POWER,"Power Metric"); gw.wait(SHORT_WAIT); #endif #ifdef ID_S_HEATER Serial.println(" S_HEATER"); - gw.present(ID_S_HEATER,S_HEATER); + gw.present(ID_S_HEATER,S_HEATER,"Garage Heater"); gw.wait(SHORT_WAIT); #endif #ifdef ID_S_DISTANCE Serial.println(" S_DISTANCE"); - gw.present(ID_S_DISTANCE,S_DISTANCE); + gw.present(ID_S_DISTANCE,S_DISTANCE,"Distance Measure"); gw.wait(SHORT_WAIT); #endif #ifdef ID_S_LIGHT_LEVEL Serial.println(" S_LIGHT_LEVEL"); - gw.present(ID_S_LIGHT_LEVEL,S_LIGHT_LEVEL); + gw.present(ID_S_LIGHT_LEVEL,S_LIGHT_LEVEL,"Outside Light Level"); gw.wait(SHORT_WAIT); #endif #ifdef ID_S_LOCK Serial.println(" S_LOCK"); - gw.present(ID_S_LOCK,S_LOCK); + gw.present(ID_S_LOCK,S_LOCK,"Front Door Lock"); gw.wait(SHORT_WAIT); #endif #ifdef ID_S_IR Serial.println(" S_IR"); - gw.present(ID_S_IR,S_IR); + gw.present(ID_S_IR,S_IR,"Univeral Command"); gw.wait(SHORT_WAIT); #endif #ifdef ID_S_WATER Serial.println(" S_WATER"); - gw.present(ID_S_WATER,S_WATER); + gw.present(ID_S_WATER,S_WATER,"Water Level"); gw.wait(SHORT_WAIT); #endif #ifdef ID_S_AIR_QUALITY Serial.println(" S_AIR_QUALITY"); - gw.present(ID_S_AIR_QUALITY,S_AIR_QUALITY); + gw.present(ID_S_AIR_QUALITY,S_AIR_QUALITY,"Air Station"); gw.wait(SHORT_WAIT); #endif #ifdef ID_S_DUST Serial.println(" S_DUST"); - gw.present(ID_S_DUST,S_DUST); + gw.present(ID_S_DUST,S_DUST,"Dust Level"); gw.wait(SHORT_WAIT); #endif #ifdef ID_S_SCENE_CONTROLLER Serial.println(" S_SCENE_CONTROLLER"); - gw.present(ID_S_SCENE_CONTROLLER,S_SCENE_CONTROLLER); + gw.present(ID_S_SCENE_CONTROLLER,S_SCENE_CONTROLLER,"Scene Controller"); gw.wait(SHORT_WAIT); #endif + + #ifdef ID_S_RGB_LIGHT + Serial.println(" RGB_LIGHT"); + gw.present(ID_S_RGB_LIGHT,S_RGB_LIGHT,"Mood Light"); + gw.wait(SHORT_WAIT); + #endif + + #ifdef ID_S_RGBW_LIGHT + Serial.println(" RGBW_LIGHT"); + gw.present(ID_S_RGBW_LIGHT,S_RGBW_LIGHT,"Mood Light 2"); + gw.wait(SHORT_WAIT); + #endif + + #ifdef ID_S_COLOR_SENSOR + Serial.println(" COLOR_SENSOR"); + gw.present(ID_S_COLOR_SENSOR,S_COLOR_SENSOR,"Hall Painting"); + gw.wait(SHORT_WAIT); + #endif + + #ifdef ID_S_HVAC + Serial.println(" HVAC"); + gw.present(ID_S_HVAC,S_HVAC,"HVAC"); + gw.wait(SHORT_WAIT); + #endif + + #ifdef ID_S_MULTIMETER + Serial.println(" MULTIMETER"); + gw.present(ID_S_MULTIMETER,S_MULTIMETER,"Electric Staion"); + gw.wait(SHORT_WAIT); + #endif + + #ifdef ID_S_SPRINKLER + #endif + #ifdef ID_S_WATER_LEAK + #endif + #ifdef ID_S_SOUND + #endif + #ifdef ID_S_VIBRATION + #endif + #ifdef ID_S_MOISTURE + #endif #ifdef ID_S_MOISTURE Serial.println(" S_MOISTURE"); - gw.present(ID_S_MOISTURE,S_MOISTURE); + gw.present(ID_S_MOISTURE,S_MOISTURE,"Basement Sensor"); gw.wait(SHORT_WAIT); #endif #ifdef ID_S_CUSTOM Serial.println(" S_CUSTOM"); - gw.present(ID_S_CUSTOM,S_CUSTOM); + gw.present(ID_S_CUSTOM,S_CUSTOM,"Other Stuff"); gw.wait(SHORT_WAIT); #endif @@ -551,6 +691,37 @@ void loop() scene(); #endif + #ifdef ID_S_RGB_LIGHT + rgbLight(); + #endif + + #ifdef ID_S_RGBW_LIGHT + rgbwLight(); + #endif + + #ifdef ID_S_COLOR_SENSOR + color(); + #endif + + #ifdef ID_S_HVAC + hvac(); + #endif + + #ifdef ID_S_MULTIMETER + multimeter(); + #endif + + #ifdef ID_S_SPRINKLER + #endif + #ifdef ID_S_WATER_LEAK + #endif + #ifdef ID_S_SOUND + #endif + #ifdef ID_S_VIBRATION + #endif + #ifdef ID_S_MOISTURE + #endif + #ifdef ID_S_MOISTURE moisture(); #endif @@ -666,17 +837,17 @@ void cover(){ Serial.print("Cover is : " ); - if (coverVal == "V_UP"){ + if (coverState == 1){ Serial.println("Opening"); - gw.send(msg_S_COVER_U.set(V_UP)); - }else if (coverVal == "V_DOWN"){ + gw.send(msg_S_COVER_U.set(1)); + }else if (coverState == -1){ Serial.println("Closing"); - gw.send(msg_S_COVER_D.set(V_DOWN)); + gw.send(msg_S_COVER_D.set(0)); }else{ Serial.println("Idle"); - gw.send(msg_S_COVER_S.set(V_STOP)); + gw.send(msg_S_COVER_S.set(-1)); } - + gw.send(msg_S_COVER_V.set(coverState)); } #endif @@ -780,50 +951,38 @@ void weight(){ void power(){ Serial.print("Watt is: " ); - Serial.println(map(randNumber,1,100,0,150)); - + Serial.println(map(randNumber,1,100,0,150)); gw.send(msg_S_POWER_W.set(map(randNumber,1,100,0,150))); Serial.print("KWH is: " ); - Serial.println(map(randNumber,1,100,0,150)); - + Serial.println(map(randNumber,1,100,0,150)); gw.send(msg_S_POWER_K.set(map(randNumber,1,100,0,150))); -// Serial.print("Impedance is: " ); -// Serial.println(map(randNumber,1,100,0,150)); -// -// gw.send(msg_S_POWER_I.set(map(randNumber,1,100,0,150))); - -// Serial.print("Voltage is: " ); -// Serial.println(map(randNumber,1,100,0,150)); -// -// gw.send(msg_S_POWER_V.set(map(randNumber,1,100,0,150))); - -// Serial.print("Current is: " ); -// Serial.println(map(randNumber,1,100,0,150)); -// -// gw.send(msg_S_POWER_C.set(map(randNumber,1,100,0,150))); - } #endif #ifdef ID_S_HEATER void heater(){ +// float heater_setpoint=21.5; +// float heater_temp=23.5; +// bool heater_status=false; +// String heatState="Off"; + Serial.print("Heater flow state is: " ); Serial.println(heater_flow_state); - gw.send(msg_S_HEATER_FLOWSTATE.set(heater_flow_state.c_str())); + gw.send(msg_S_HEATER_FLOW_STATE.set(heater_flow_state.c_str())); - Serial.print("Heater on/off is: " ); - Serial.println((heater_status==true)?"On":"Off"); - gw.send(msg_S_HEATER_STATUS.set(heater_status)); +// Serial.print("Heater on/off is: " ); +// Serial.println((heater_status==true)?"On":"Off"); +// gw.send(msg_S_HEATER_STATUS.set(heater_status)); - Serial.print("Heater Temperature is: " ); - Serial.println(heater_temp,1); - gw.send(msg_S_HEATER_TEMP.set(heater_temp,1)); +// Serial.print("Heater Temperature is: " ); +// Serial.println(heater_temp,1); +// gw.send(msg_S_HEATER_TEMP.set(heater_temp,1)); Serial.print("Heater Setpoint: " ); Serial.println(heater_setpoint,1); - gw.send(msg_S_HEATER_SETPOINT.set(heater_setpoint,1)); + gw.send(msg_S_HEATER_SET_POINT.set(heater_setpoint,1)); } #endif @@ -866,6 +1025,7 @@ void ir(){ Serial.println(irVal); gw.send(msg_S_IR_S.set(irVal)); + gw.send(msg_S_IR_R.set(irVal)); } #endif @@ -923,6 +1083,115 @@ void scene(){ } #endif +#ifdef ID_S_RGB_LIGHT +void rgbLight(){ + + Serial.print("RGB Light state is: " ); + Serial.println(rgbState); + gw.send(msg_S_RGB_LIGHT_V_RGB.set(rgbState.c_str())); + + Serial.print("RGB Light Watt is: " ); + Serial.println(map(randNumber,1,100,0,150)); + gw.send(msg_S_RGB_LIGHT_V_WATT.set(map(randNumber,1,100,0,150))); + +} +#endif + +#ifdef ID_S_RGBW_LIGHT +void rgbwLight(){ + + Serial.print("RGBW Light state is: " ); + Serial.println(rgbwState); + gw.send(msg_S_RGBW_LIGHT_V_RGBW.set(rgbwState.c_str())); + + Serial.print("RGBW Light Watt is: " ); + Serial.println(map(randNumber,1,100,0,150)); + gw.send(msg_S_RGBW_LIGHT_V_WATT.set(map(randNumber,1,100,0,150))); + +} +#endif + +#ifdef ID_S_COLOR_SENSOR +void color(){ + String colorState; + + String red = String(random(0,256),HEX); + String green = String(random(0,256),HEX); + String blue = String(random(0,256),HEX); + + colorState=String(red + green + blue); + + Serial.print("Color state is: " ); + Serial.println(colorState); + gw.send(msg_S_COLOR_SENSOR_V_RGB.set(colorState.c_str())); + +} +#endif + +#ifdef ID_S_HVAC +void hvac(){ + +// float hvac_SetPointHeat = 16.5; +// float hvac_SetPointCool = 25.5; +// String hvac_FlowState = "AutoChangeOver"; +// String hvac_FlowMode = "Auto"; +// String hvac_Speed = "Normal"; + + Serial.print("HVAC Set Point Heat is: " ); + Serial.println(hvac_SetPointHeat); + gw.send(msg_S_HVAC_V_HVAC_SETPOINT_HEAT.set(hvac_SetPointHeat,1)); + + Serial.print("HVAC Set Point Cool is: " ); + Serial.println(hvac_SetPointCool); + gw.send(msg_S_HVAC_V_HVAC_SETPOINT_COOL.set(hvac_SetPointCool,1)); + + Serial.print("HVAC Flow State is: " ); + Serial.println(hvac_FlowState); + gw.send(msg_S_HVAC_V_HVAC_FLOW_STATET.set(hvac_FlowState.c_str())); + + Serial.print("HVAC Flow Mode is: " ); + Serial.println(hvac_FlowMode); + gw.send(msg_S_HVAC_V_HVAC_FLOW_MODE.set(hvac_FlowMode.c_str())); + + Serial.print("HVAC Speed is: " ); + Serial.println(hvac_Speed); + gw.send(msg_S_HVAC_V_HVAC_SPEED.set(hvac_Speed.c_str())); + +} +#endif + +#ifdef ID_S_MULTIMETER +void multimeter(){ + int impedance=map(randNumber,1,100,0,15000); + int volt=map(randNumber,1,100,0,380); + int amps=map(randNumber,1,100,0,16); + + Serial.print("Impedance is: " ); + Serial.println(impedance); + gw.send(msg_S_MULTIMETER_V_IMPEDANCE.set(impedance)); + + Serial.print("Voltage is: " ); + Serial.println(volt); + gw.send(msg_S_MULTIMETER_V_VOLTAGE.set(volt)); + + Serial.print("Current is: " ); + Serial.println(amps); + gw.send(msg_S_MULTIMETER_V_CURRENT.set(amps)); + +} +#endif + +#ifdef ID_S_SPRINKLER +#endif +#ifdef ID_S_WATER_LEAK +#endif +#ifdef ID_S_SOUND +#endif +#ifdef ID_S_VIBRATION +#endif +#ifdef ID_S_MOISTURE +#endif + #ifdef ID_S_MOISTURE void moisture(){ @@ -958,20 +1227,42 @@ void incomingMessage(const MyMessage &message) { Serial.print(message.sensor); Serial.print(", New status: "); Serial.println((isArmed ? "Armed":"Disarmed" )); - door();//temp ack for door + #ifdef ID_S_DOOR + door();//temp ack for door + #endif + #ifdef ID_S_MOTION + motion();//temp ack + #endif + #ifdef ID_S_SMOKE + smoke();//temp ack + #endif break; #endif + + case V_STATUS: // V_LIGHT: #ifdef ID_S_LIGHT - case V_LIGHT: + if(message.sensor==ID_S_LIGHT){ isLightOn = message.getBool(); Serial.print("Incoming change for ID_S_LIGHT:"); Serial.print(message.sensor); Serial.print(", New status: "); Serial.println((isLightOn ? "On":"Off")); light(); // temp ack - break; + } #endif +// #ifdef ID_S_HEATER +// if(message.sensor == ID_S_HEATER){ +// heater_status = message.getBool(); +// Serial.print("Incoming change for ID_S_HEATER:"); +// Serial.print(message.sensor); +// Serial.print(", New status: "); +// Serial.println(heater_status); +// heater();//temp ack +// } +// #endif + break; + #ifdef ID_S_DIMMER case V_DIMMER: @@ -984,58 +1275,90 @@ void incomingMessage(const MyMessage &message) { Serial.print(message.sensor); Serial.print(", New status: "); Serial.println(message.getInt()); + dimmer();// temp ack break; #endif #ifdef ID_S_COVER case V_UP: - coverVal="V_UP"; + coverState=1; Serial.print("Incoming change for ID_S_COVER:"); Serial.print(message.sensor); Serial.print(", New status: "); Serial.println("V_UP"); + cover(); // temp ack break; case V_DOWN: - coverVal="V_DOWN"; + coverState=-1; Serial.print("Incoming change for ID_S_COVER:"); Serial.print(message.sensor); Serial.print(", New status: "); Serial.println("V_DOWN"); + cover(); //temp ack break; case V_STOP: - coverVal="V_STOP"; + coverState=0; Serial.print("Incoming change for ID_S_COVER:"); Serial.print(message.sensor); Serial.print(", New status: "); Serial.println("V_STOP"); + cover(); //temp ack break; #endif - #ifdef ID_S_HEATER + case V_HVAC_SETPOINT_HEAT: + + #ifdef ID_S_HEATER + if(message.sensor == ID_S_HEATER){ + heater_setpoint=message.getFloat(); + Serial.print("Incoming set point for ID_S_HEATER:"); Serial.print(message.sensor); Serial.print(", New status: "); - heater_setpoint=message.getFloat(); Serial.println(heater_setpoint,1); - break; - case V_STATUS: - Serial.print("Incoming change for ID_S_HEATER:"); + heater();//temp ack + } + #endif + + #ifdef ID_S_HVAC + if(message.sensor == ID_S_HVAC){ + hvac_SetPointHeat=message.getFloat(); + Serial.print("Incoming set point for ID_S_HVAC:"); Serial.print(message.sensor); Serial.print(", New status: "); - heater_status = message.getBool(); - Serial.println(heater_status); + Serial.println(hvac_SetPointHeat,1); + hvac();//temp ack + } + #endif break; + case V_HVAC_FLOW_STATE: + #ifdef ID_S_HEATER + if(message.sensor == ID_S_HEATER){ + heater_flow_state=message.getString(); Serial.print("Incoming flow state change for ID_S_HEATER:"); Serial.print(message.sensor); Serial.print(", New status: "); - heater_flow_state=message.getString(); Serial.println(heater_flow_state); + heater();//temp ack + } + #endif + + #ifdef ID_S_HVAC + if(message.sensor == ID_S_HVAC){ + hvac_FlowState=message.getString(); + + Serial.print("Incoming set point for ID_S_HVAC:"); + Serial.print(message.sensor); + Serial.print(", New status: "); + Serial.println(hvac_FlowState); + hvac();//temp ack + } + #endif break; - #endif #ifdef ID_S_LOCK case V_LOCK_STATUS: @@ -1049,12 +1372,21 @@ void incomingMessage(const MyMessage &message) { #endif #ifdef ID_S_IR - case V_IR_RECEIVE: - irVal = message.getString(); + case V_IR_SEND: + irVal = message.getLong(); Serial.print("Incoming change for ID_S_IR:"); Serial.print(message.sensor); Serial.print(", New status: "); Serial.println(irVal); + ir(); // temp ack + break; + case V_IR_RECEIVE: + irVal = message.getLong(); + Serial.print("Incoming change for ID_S_IR:"); + Serial.print(message.sensor); + Serial.print(", New status: "); + Serial.println(irVal); + ir(); // temp ack break; #endif @@ -1066,7 +1398,7 @@ void incomingMessage(const MyMessage &message) { Serial.print(", New status: "); Serial.print(scenes[sceneVal]); Serial.println(" On"); - scene(); + scene();// temp ack break; case V_SCENE_OFF: sceneVal = message.getInt(); @@ -1075,10 +1407,71 @@ void incomingMessage(const MyMessage &message) { Serial.print(", New status: "); Serial.print(scenes[sceneVal]); Serial.println(" Off"); - scene(); + scene();// temp ack break; #endif - + + #ifdef ID_S_RGB_LIGHT + case V_RGB: + rgbState=message.getString(); + Serial.print("Incoming flow state change for ID_S_RGB_LIGHT:"); + Serial.print(message.sensor); + Serial.print(", New status: "); + Serial.println(rgbState); + rgbLight(); // temp ack + + break; + #endif + + #ifdef ID_S_RGBW_LIGHT + case V_RGBW: + rgbwState=message.getString(); + Serial.print("Incoming flow state change for ID_S_RGBW_LIGHT:"); + Serial.print(message.sensor); + Serial.print(", New status: "); + Serial.println(rgbwState); + rgbwLight(); + break; + #endif + + #ifdef ID_S_HVAC + // hvac_SetPointHeat + // hvac_SetPointCool + // hvac_FlowState + // hvac_FlowMode + // hvac_Speed + + case V_HVAC_SETPOINT_COOL: + hvac_SetPointCool=message.getFloat(); + + Serial.print("Incoming set point for ID_S_HVAC:"); + Serial.print(message.sensor); + Serial.print(", New status: "); + Serial.println(hvac_SetPointCool,1); + hvac();//temp ack + break; + + case V_HVAC_FLOW_MODE: + hvac_Speed=message.getString(); + + Serial.print("Incoming set point for ID_S_HVAC:"); + Serial.print(message.sensor); + Serial.print(", New status: "); + Serial.println(hvac_Speed); + hvac();//temp ack + break; + + case V_HVAC_SPEED: + hvac_FlowMode=message.getString(); + + Serial.print("Incoming set point for ID_S_HVAC:"); + Serial.print(message.sensor); + Serial.print(", New status: "); + Serial.println(hvac_FlowMode); + hvac();//temp ack + break; + #endif + default: Serial.print("Unknown/UnImplemented message type: "); Serial.println(message.type); diff --git a/libraries/MySensors/examples/MockMySensors/README.md b/libraries/MySensors/examples/MockMySensors/README.md index c835b2d..ef2062e 100644 --- a/libraries/MySensors/examples/MockMySensors/README.md +++ b/libraries/MySensors/examples/MockMySensors/README.md @@ -17,7 +17,23 @@ With a Mega you can have them all Changes Log ----------------- +2015-09-07 +Five more sensors + S_RGB_LIGHT + S_RGBW_LIGHT + S_COLOR_SENSOR + S_HVAC + S_MULTIMETER +Consolidated HVAC and HEATER incoming message + +2015-09-06 + +Merge with Gizmocuz (implementation of S_HEATER & S_MOISTURE +Implementation of S_COVER, S_IR, S_SCENE_CONTROLLER + + 2015-08-19 + Removed the load/save to eeprom Touched the heater sensor Created a pseudo sensor to handle the V_ARMED message.