MySmartHome/MySensors
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Add nrf5 platform (#830)

Browse Source 
* Add NVRAM support

This is an EEPROM replacement based on MCU's internal Flash memory.
The NVRAM class is designed to be stateless. Each operation is
written to flash immediately.

The last 16k(nRF51)/32k(nRF52) of Flash memory are managed by the
VirtualPage class.  This class allows writing a single emulated 4k
page up 40,000 times.

The NVRAM class is a log based byte-wise storage allowing up to
40,000,000 writes depending on the number of used addresses.  Each
four allocated addresses from the beginning of the NVRAM reduce the
write log by one.

When first 256 bytes of the emulated storage are used, there is an
average writing capacity of 145,000 cycles per byte.

When the write log is full, the NVRAM is compressed into a new flash
page. After a new page is ready, the old page is released. This
process can take up to 4500 ms and cannot be interrupted.

The NVRAM functionality can easily be ported to ESP8266 or SAMD by
providing a Flash interface.

* Add NRF5 platform support

This is the support of the Nordic Semiconductor NRF51 (nrf51822,
nrf51422) and NRF52 (nrf52832) platform. Based on arduino-nRF5
(https://github.com/sandeepmistry/arduino-nRF5).

The included radio driver is compatible with the NRF24 devices.
Using a SoftDevice (BLE)is not supported and must be removed before
flashing MySensors with a "mass_erase" operation.
This commit is contained in:
d00616
2017-05-14 11:53:01 +02:00
committed by Olivier
parent a4c7b249c1
commit 726a20dad9
26 changed files with 3576 additions and 11 deletions
Download Patch File Download Diff File Expand all files Collapse all files
MySensors.h
+27 -6
View File
@@ -66,7 +66,7 @@
#define MY_DEBUG_VERBOSE_OTA_UPDATE //!< MY_DEBUG_VERBOSE_OTA_UPDATE
#endif
#if defined(MY_DEBUG) || defined(MY_DEBUG_VERBOSE_CORE) || defined(MY_DEBUG_VERBOSE_TRANSPORT) || defined(MY_DEBUG_VERBOSE_SIGNING) || defined(MY_DEBUG_VERBOSE_OTA_UPDATE) || defined(MY_DEBUG_VERBOSE_RF24) || defined(MY_DEBUG_VERBOSE_RFM69) || defined(MY_DEBUG_VERBOSE_RFM95)
#if defined(MY_DEBUG) || defined(MY_DEBUG_VERBOSE_CORE) || defined(MY_DEBUG_VERBOSE_TRANSPORT) || defined(MY_DEBUG_VERBOSE_SIGNING) || defined(MY_DEBUG_VERBOSE_OTA_UPDATE) || defined(MY_DEBUG_VERBOSE_RF24) || defined(MY_DEBUG_VERBOSE_NRF5_ESB) || defined(MY_DEBUG_VERBOSE_RFM69) || defined(MY_DEBUG_VERBOSE_RFM95)
#define DEBUG_OUTPUT_ENABLED //!< DEBUG_OUTPUT_ENABLED
#define DEBUG_OUTPUT(x,...) hwDebugPrint(x, ##__VA_ARGS__) //!< debug
#else
@@ -78,7 +78,7 @@
// Enable sensor network "feature" if one of the transport types was enabled
#if defined(MY_RADIO_RF24) || defined(MY_RADIO_RFM69) || defined(MY_RADIO_RFM95) || defined(MY_RS485)
#if defined(MY_RADIO_RF24) || defined(MY_RADIO_NRF5_ESB) || defined(MY_RADIO_RFM69) || defined(MY_RADIO_RFM95) || defined(MY_RS485)
#define MY_SENSOR_NETWORK
#endif
@@ -93,6 +93,10 @@
#include "hal/architecture/MyHwSAMD.cpp"
#elif defined(ARDUINO_ARCH_STM32F1)
#include "hal/architecture/MyHwSTM32F1.cpp"
#elif defined(ARDUINO_ARCH_NRF5)
#include "drivers/NVM/VirtualPage.cpp"
#include "drivers/NVM/NVRAM.cpp"
#include "hal/architecture/MyHwNRF5.cpp"
#elif defined(__linux__)
#include "hal/architecture/MyHwLinuxGeneric.cpp"
#endif
@@ -247,7 +251,12 @@ MY_DEFAULT_RX_LED_PIN in your sketch instead to enable LEDs
#if defined(MY_RADIO_RF24)
#define __RF24CNT 1 //!< __RF24CNT
#else
#define __RF24CNT 0 //!< __RF24CNT
#define __RF24CNT 0 //!< __RF24CNT
#endif
#if defined(MY_RADIO_NRF5_ESB)
#define __NRF5ESBCNT 1 //!< __NRF5ESBCNT
#else
#define __NRF5ESBCNT 0 //!< __NRF5ESBCNT
#endif
#if defined(MY_RADIO_RFM69)
#define __RFM69CNT 1 //!< __RFM69CNT
@@ -265,12 +274,12 @@ MY_DEFAULT_RX_LED_PIN in your sketch instead to enable LEDs
#define __RS485CNT 0 //!< __RS485CNT
#endif
#if (__RF24CNT + __RFM69CNT + __RFM95CNT + __RS485CNT > 1)
#if (__RF24CNT + __NRF5ESBCNT + __RFM69CNT + __RFM95CNT + __RS485CNT > 1)
#error Only one forward link driver can be activated
#endif
// TRANSPORT INCLUDES
#if defined(MY_RADIO_RF24) || defined(MY_RADIO_RFM69) || defined(MY_RADIO_RFM95) || defined(MY_RS485)
#if defined(MY_RADIO_RF24) || defined(MY_RADIO_NRF5_ESB) || defined(MY_RADIO_RFM69) || defined(MY_RADIO_RFM95) || defined(MY_RS485)
#include "hal/transport/MyTransportHAL.h"
#include "core/MyTransport.h"
@@ -292,7 +301,7 @@ MY_DEFAULT_RX_LED_PIN in your sketch instead to enable LEDs
// RAM ROUTING TABLE
#if defined(MY_RAM_ROUTING_TABLE_FEATURE) && defined(MY_REPEATER_FEATURE)
// activate feature based on architecture
#if defined(ARDUINO_ARCH_ESP8266) || defined(ARDUINO_ARCH_SAMD) || defined(__linux__)
#if defined(ARDUINO_ARCH_ESP8266) || defined(ARDUINO_ARCH_SAMD) || defined(ARDUINO_ARCH_NRF5) || defined(__linux__)
#define MY_RAM_ROUTING_TABLE_ENABLED
#elif defined(ARDUINO_ARCH_AVR)
#if defined(__avr_atmega1280__) || defined(__avr_atmega1284__) || defined(__avr_atmega2560__)
@@ -331,6 +340,16 @@ MY_DEFAULT_RX_LED_PIN in your sketch instead to enable LEDs
#endif
#include "drivers/RF24/RF24.cpp"
#include "hal/transport/MyTransportRF24.cpp"
#elif defined(MY_RADIO_NRF5_ESB)
#if !defined(ARDUINO_ARCH_NRF5)
#error No support for nRF5 radio on this platform
#endif
#if defined(MY_NRF5_ESB_ENABLE_ENCRYPTION)
#include "drivers/AES/AES.cpp"
#endif
#include "drivers/NRF5/Radio.cpp"
#include "drivers/NRF5/Radio_ESB.cpp"
#include "hal/transport/MyTransportNRF5_ESB.cpp"
#elif defined(MY_RS485)
#if !defined(MY_RS485_HWSERIAL)
#if defined(__linux__)
@@ -399,6 +418,8 @@ MY_DEFAULT_RX_LED_PIN in your sketch instead to enable LEDs
#if !defined(MY_CORE_ONLY)
#if defined(ARDUINO_ARCH_ESP8266)
#include "hal/architecture/MyMainESP8266.cpp"
#elif defined(ARDUINO_ARCH_NRF5)
#include "hal/architecture/MyMainNRF5.cpp"
#elif defined(__linux__)
#include "hal/architecture/MyMainLinux.cpp"
#elif defined(ARDUINO_ARCH_STM32F1)