MySmartHome/MySensors
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

RPi: Add support for RS485 transport

Browse Source 
Remove serial print from MyTransportRS485.cpp to increase speed.
This commit is contained in:
Marcelo Aquino
2016-10-21 09:01:37 -02:00
parent f10e142630
commit 76dea1532c
8 changed files with 85 additions and 18 deletions
Download Patch File Download Diff File Expand all files Collapse all files
examples/GatewaySerialRS485/GatewaySerialRS485.ino
+7 -2
View File
@@ -32,8 +32,10 @@
* - TX (yellow) - blink fast on radio message transmitted. In inclusion mode will blink slowly
* - ERR (red) - fast blink on error during transmission error or recieve crc error
*
* The gateway uses AltSoftSerial to handle two serial links
* on one Arduino. Use the following pins for RS485 link
* If your Arduino board has additional serial ports
* you can use to connect the RS485 module.
* Otherwise, the gateway uses AltSoftSerial to handle two serial
* links on one Arduino. Use the following pins for RS485 link
*
* Board Transmit Receive PWM Unusable
* ----- -------- ------- ------------
@@ -60,6 +62,9 @@
// Set RS485 baud rate to use
#define MY_RS485_BAUD_RATE 9600
// Enable this if RS485 is connected to a hardware serial port
//#define MY_RS485_HWSERIAL Serial1
// Enable serial gateway
#define MY_GATEWAY_SERIAL