Smart sleep

Add “Smart sleep” variants of all sleep methods that allows nodes to
receive buffered messages/commands from controller that was issued while
node was sleeping.. When calling the smartSleep() variant, the node
immediately sends a heartbeat mesage when waking up (informing
controller that node is awake). Before going back to sleep it waits
MY_SMART_SLEEP_WAIT_DURATION to process any incoming buffered messages
from the controller. NOTE: Controller must support this feature.

libraries/MySensors/MyConfig.h

@@ -74,6 +74,13 @@
 // Enables repeater functionality (relays messages from other nodes)
 // #define MY_REPEATER_FEATURE
 
+// The wait period before going to sleep when using smartSleep-functions
+// This period has to be long enough for controller to be able to send out
+// potential buffered messages.
+#ifndef MY_SMART_SLEEP_WAIT_DURATION
+#define MY_SMART_SLEEP_WAIT_DURATION 500
+#endif
+
 /**********************************
 *  Over the air firmware updates
 ***********************************/

libraries/MySensors/core/MyCapabilities.h

@@ -41,7 +41,7 @@
 #elif defined(MY_RS485)
 	#define MY_CAP_RADIO "S"
 #else
-	#define MY_CAP_RADIO "?"
+	#define MY_CAP_RADIO "-"
 #endif
 
 #if defined(MY_GATEWAY_FEATURE)
@@ -59,7 +59,7 @@
 #elif defined(ARDUINO_ARCH_AVR)
 	#define MY_CAP_ARCH "A"
 #else
-	#define MY_CAP_ARCH "?"
+	#define MY_CAP_ARCH "-"
 #endif
 
 #if defined(MY_SIGNING_ATSHA204)
@@ -67,10 +67,10 @@
 #elif defined(MY_SIGNING_SOFT)
 	#define MY_CAP_SIGN "S"
 #else
-	#define MY_CAP_SIGN "?"
+	#define MY_CAP_SIGN "-"
 #endif
 
 
-#define MY_CAPABILIIES MY_CAP_RESET MY_CAP_OTA_FW MY_CAP_TYPE MY_CAP_ARCH MY_CAP_SIGN
+#define MY_CAPABILIIES MY_CAP_RESET MY_CAP_RADIO MY_CAP_OTA_FW MY_CAP_TYPE MY_CAP_ARCH MY_CAP_SIGN
 
 #endif /* MyGatewayTransportEthernet_h */

libraries/MySensors/core/MySensorCore.cpp

@@ -334,6 +334,12 @@ void sleep(unsigned long ms) {
 	#endif
 }
 
+void smartSleep(unsigned long ms) {
+	wait(MY_SMART_SLEEP_WAIT_DURATION);
+	sleep(ms);
+	sendHeartbeat();
+}
+
 bool sleep(uint8_t interrupt, uint8_t mode, unsigned long ms) {
 	#if defined(MY_OTA_FIRMWARE_FEATURE)
 	if (_fwUpdateOngoing) {
@@ -350,6 +356,13 @@ bool sleep(uint8_t interrupt, uint8_t mode, unsigned long ms) {
 	#endif
 }
 
+bool smartSleep(uint8_t interrupt, uint8_t mode, unsigned long ms) {
+	wait(MY_SMART_SLEEP_WAIT_DURATION);
+	bool ret = sleep(interrupt, mode, ms);
+	sendHeartbeat();
+	return ret;
+}
+
 int8_t sleep(uint8_t interrupt1, uint8_t mode1, uint8_t interrupt2, uint8_t mode2, unsigned long ms) {
 	#if defined(MY_OTA_FIRMWARE_FEATURE)
 	if (_fwUpdateOngoing) {
@@ -366,6 +379,11 @@ int8_t sleep(uint8_t interrupt1, uint8_t mode1, uint8_t interrupt2, uint8_t mode
 	#endif
 }
 
-
+int8_t smartSleep(uint8_t interrupt1, uint8_t mode1, uint8_t interrupt2, uint8_t mode2, unsigned long ms) {
+	wait(MY_SMART_SLEEP_WAIT_DURATION);
+	int8_t ret = sleep(interrupt1, mode1, interrupt2, mode2, ms);
+	sendHeartbeat();
+	return ret;
+}
 
 

libraries/MySensors/core/MySensorCore.h

@@ -23,10 +23,6 @@
 
 #include "Version.h"   // Auto generated by bot
 #include "MyConfig.h"
-#ifdef MY_SIGNING_FEATURE
-#include "MySigning.h"
-#include "MySigningNone.h"
-#endif
 #include "MyMessage.h"
 #ifdef MY_OTA_FIRMWARE_FEATURE
 #include "drivers/SPIFlash/SPIFlash.h"
@@ -184,6 +180,7 @@ void wait(unsigned long ms);
  * @param ms Number of milliseconds to sleep.
  */
 void sleep(unsigned long ms);
+void smartSleep(unsigned long ms);
 
 /**
  * Sleep (PowerDownMode) the MCU and radio. Wake up on timer or pin change.
@@ -195,6 +192,7 @@ void sleep(unsigned long ms);
  * @return true if wake up was triggered by pin change and false means timer woke it up.
  */
 bool sleep(uint8_t interrupt, uint8_t mode, unsigned long ms=0);
+bool smartSleep(uint8_t interrupt, uint8_t mode, unsigned long ms=0);
 
 /**
  * Sleep (PowerDownMode) the MCU and radio. Wake up on timer or pin change for two separate interrupts.
@@ -208,6 +206,7 @@ bool sleep(uint8_t interrupt, uint8_t mode, unsigned long ms=0);
  * @return Interrupt number wake up was triggered by pin change and negative if timer woke it up.
  */
 int8_t sleep(uint8_t interrupt1, uint8_t mode1, uint8_t interrupt2, uint8_t mode2, unsigned long ms=0);
+int8_t smartSleep(uint8_t interrupt1, uint8_t mode1, uint8_t interrupt2, uint8_t mode2, unsigned long ms=0);
 
 
 /******  PRIVATE ********/

libraries/MySensors/keywords.txt

@@ -7,7 +7,6 @@ MySensor	KEYWORD1
 #######################################
 # Methods and Functions (KEYWORD2)
 #######################################
-setIncomingCallback	KEYWORD2
 present	KEYWORD2
 send	KEYWORD2
 sendSketchInfo	KEYWORD2
@@ -24,6 +23,8 @@ receiveTime	KEYWORD2
 loop	KEYWORD2
 setup	KEYWORD2
 presentation	KEYWORD2
+sleep	KEYWORD2
+smartSleep	KEYWORD2
 
 ######################################
 # Constants (LITERAL1)
@@ -107,3 +108,5 @@ MY_MQTT_CLIENT_ID	LITERAL1
 MY_GATEWAY_MQTT_CLIENT	LITERAL1
 MY_DISABLE_REMOTE_RESET	LITERAL1
 MY_RS485_DE_PIN	LITERAL1
+MY_SIGNING_REQUEST_SIGNATURES	LITERAL1
+MY_SMART_SLEEP_WAIT_DURATION	LITERAL1