Merge remote-tracking branch 'upstream/master'

libraries/MySensors/examples/UVSensor/UVSensor.ino

@@ -1,5 +1,7 @@
+#include <SPI.h>
+#include <MySensor.h>  
 /*
-  Vera Arduino UVM-30A
+  Arduino UVM-30A
 
   connect the sensor as follows :
 
@@ -7,44 +9,55 @@
   -   >>> GND
   out >>> A0     
   
-  Contribution: epierre, bulldoglowell
+  Contribution: epierre, bulldoglowell, gizmocuz
-  Converted to 1.4 by Henrik Ekblad
+
+  Index table taken from: http://www.elecrow.com/sensors-c-111/environment-c-111_112/uv-sensor-moduleuvm30a-p-716.html
+  Because this table is pretty lineair, we can calculate a UVI with one decimal 
 
   License: Attribution-NonCommercial-ShareAlike 3.0 Unported (CC BY-NC-SA 3.0)
- 
 */
 
 #include <MySensor.h>  
 #include <SPI.h>
 
-#define CHILD_ID_UV 0
 #define UV_SENSOR_ANALOG_PIN 0
+
+#define CHILD_ID_UV 0
+
 unsigned long SLEEP_TIME = 30*1000; // Sleep time between reads (in milliseconds)
 
 MySensor gw;
 MyMessage uvMsg(CHILD_ID_UV, V_UV);
-int lastUV = -1;
+
-int uvIndexValue [13] = { 50, 227, 318, 408, 503, 606, 696, 795, 881, 976, 1079, 1170, 3000};
+unsigned long lastSend =0; 
-int uvIndex;
+float uvIndex;
+float lastUV = -1;
+int uvIndexValue [12] = { 50, 227, 318, 408, 503, 606, 696, 795, 881, 976, 1079, 1170};
 
 void setup()  
 { 
   gw.begin();
 
   // Send the sketch version information to the gateway and Controller
-  gw.sendSketchInfo("UV Sensor", "1.1");
+  gw.sendSketchInfo("UV Sensor", "1.2");
 
   // Register all sensors to gateway (they will be created as child devices)
   gw.present(CHILD_ID_UV, S_UV);
-
 }
 
 void loop()      
 {
-  uint16_t uv = analogRead(0);// Get UV value
+  unsigned long currentTime = millis();
-  Serial.print("Uv reading: ");
+  
-  Serial.println(uv);
+  uint16_t uv = analogRead(UV_SENSOR_ANALOG_PIN);// Get UV value
-  for (int i = 0; i < 13; i++)
+  if (uv>1170)
+    uv=1170;
+    
+  //Serial.print("UV Analog reading: ");
+  //Serial.println(uv);
+  
+  int i;
+  for (i = 0; i < 12; i++)
   {
     if (uv <= uvIndexValue[i]) 
     {
@@ -52,11 +65,21 @@ void loop()
       break;
     }
   }
-  Serial.print("Uv index: ");
-  Serial.println(uvIndex);
   
-  if (uvIndex != lastUV) {
+  //calculate 1 decimal if possible
-      gw.send(uvMsg.set(uvIndex));
+  if (i>0) {
+    float vRange=uvIndexValue[i]-uvIndexValue[i-1];
+    float vCalc=uv-uvIndexValue[i-1];
+    uvIndex+=(1.0/vRange)*vCalc-1.0;
+  }
+
+  //Serial.print("UVI: ");
+  //Serial.println(uvIndex,2);
+
+  //Send value to gateway if changed, or at least every 5 minutes
+  if ((uvIndex != lastUV)||(currentTime-lastSend >= 5*60*1000)) {
+      lastSend=currentTime;
+      gw.send(uvMsg.set(uvIndex,2));
       lastUV = uvIndex;
   }
   

libraries/MySensors/examples/WaterMeterPulseSensor/WaterMeterPulseSensor.ino

@@ -13,14 +13,22 @@
 #include <MySensor.h>  
 
 #define DIGITAL_INPUT_SENSOR 3                  // The digital input you attached your sensor.  (Only 2 and 3 generates interrupt!)
+#define SENSOR_INTERRUPT DIGITAL_INPUT_SENSOR-2        // Usually the interrupt = pin -2 (on uno/nano anyway)
+
 #define PULSE_FACTOR 1000                       // Nummber of blinks per m3 of your meter (One rotation/liter)
+
 #define SLEEP_MODE false                        // flowvalue can only be reported when sleep mode is false.
-#define MAX_FLOW 40                             // Max flow (l/min) value to report. This filetrs outliers.
+
-#define INTERRUPT DIGITAL_INPUT_SENSOR-2        // Usually the interrupt = pin -2 (on uno/nano anyway)
+#define MAX_FLOW 40                             // Max flow (l/min) value to report. This filters outliers.
-#define CHILD_ID 5                              // Id of the sensor child
+
+#define CHILD_ID 1                              // Id of the sensor child
+
 unsigned long SEND_FREQUENCY = 20000;           // Minimum time between send (in milliseconds). We don't want to spam the gateway.
 
 MySensor gw;
+MyMessage flowMsg(CHILD_ID,V_FLOW);
+MyMessage volumeMsg(CHILD_ID,V_VOLUME);
+MyMessage lastCounterMsg(CHILD_ID,V_VAR1);
 
 double ppl = ((double)PULSE_FACTOR)/1000;        // Pulses per liter
 
@@ -31,78 +39,86 @@ boolean pcReceived = false;
 unsigned long oldPulseCount = 0;
 unsigned long newBlink = 0;   
 double oldflow = 0;
-double volume;                     
+double volume =0;                     
-double oldvolume;
+double oldvolume =0;
-unsigned long lastSend;
+unsigned long lastSend =0;
-unsigned long lastPulse;
+unsigned long lastPulse =0;
-unsigned long currentTime;
-boolean metric;
-MyMessage flowMsg(CHILD_ID,V_FLOW);
-MyMessage volumeMsg(CHILD_ID,V_VOLUME);
-MyMessage pcMsg(CHILD_ID,V_VAR1);
-
 
 void setup()  
 {  
   gw.begin(incomingMessage); 
 
   // Send the sketch version information to the gateway and Controller
-  gw.sendSketchInfo("Water Meter", "1.0");
+  gw.sendSketchInfo("Water Meter", "1.2");
 
   // Register this device as Waterflow sensor
   gw.present(CHILD_ID, S_WATER);       
 
+  pulseCount = oldPulseCount = 0;
+
   // Fetch last known pulse count value from gw
   gw.request(CHILD_ID, V_VAR1);
 
-  attachInterrupt(INTERRUPT, onPulse, RISING);
+  lastSend = lastPulse = millis();
-  lastSend = millis();
+
+  attachInterrupt(SENSOR_INTERRUPT, onPulse, RISING);
 }
 
 
 void loop()     
 { 
   gw.process();
-  currentTime = millis();
+  unsigned long currentTime = millis();
 	
     // Only send values at a maximum frequency or woken up from sleep
-  bool sendTime = currentTime - lastSend > SEND_FREQUENCY;
+  if (SLEEP_MODE || (currentTime - lastSend > SEND_FREQUENCY))
-  if (pcReceived && (SLEEP_MODE || sendTime)) {
+  {
-    // New flow value has been calculated  
+    lastSend=currentTime;
+    
+    if (!pcReceived) {
+      //Last Pulsecount not yet received from controller, request it again
+      gw.request(CHILD_ID, V_VAR1);
+      return;
+    }
+
     if (!SLEEP_MODE && flow != oldflow) {
+      oldflow = flow;
+
+      Serial.print("l/min:");
+      Serial.println(flow);
+
       // Check that we dont get unresonable large flow value. 
       // could hapen when long wraps or false interrupt triggered
       if (flow<((unsigned long)MAX_FLOW)) {
         gw.send(flowMsg.set(flow, 2));                   // Send flow value to gw
       }  
-      //Serial.print("l/min:");
-      //Serial.println(flow);
-      oldflow = flow;
     }
   
-    // No Pulse count in 2min 
+    // No Pulse count received in 2min 
     if(currentTime - lastPulse > 120000){
       flow = 0;
     } 
 
-  
     // Pulse count has changed
     if (pulseCount != oldPulseCount) {
-      gw.send(pcMsg.set(pulseCount));                  // Send  volumevalue to gw VAR1
-      double volume = ((double)pulseCount/((double)PULSE_FACTOR));     
       oldPulseCount = pulseCount;
+
+      Serial.print("pulsecount:");
+      Serial.println(pulseCount);
+
+      gw.send(lastCounterMsg.set(pulseCount));                  // Send  pulsecount value to gw in VAR1
+
+      double volume = ((double)pulseCount/((double)PULSE_FACTOR));     
       if (volume != oldvolume) {
-        gw.send(volumeMsg.set(volume, 3));               // Send volume value to gw
         oldvolume = volume;
+
+        Serial.print("volume:");
+        Serial.println(volume, 3);
+        
+        gw.send(volumeMsg.set(volume, 3));               // Send volume value to gw
       } 
     }
-    lastSend = currentTime;
-  } else if (sendTime && !pcReceived) {
-   // No count received. Try requesting it again
-    gw.request(CHILD_ID, V_VAR1);
-    lastSend=currentTime;
   }
-  
   if (SLEEP_MODE) {
     gw.sleep(SEND_FREQUENCY);
   }
@@ -110,29 +126,32 @@ void loop()
 
 void incomingMessage(const MyMessage &message) {
   if (message.type==V_VAR1) {
-    pulseCount = oldPulseCount = message.getLong();
+    unsigned long gwPulseCount=message.getULong();
+    pulseCount += gwPulseCount;
     Serial.print("Received last pulse count from gw:");
     Serial.println(pulseCount);
     pcReceived = true;
   }
 }
 
-
 void onPulse()     
 {
-  if (!SLEEP_MODE) {
+  if (!SLEEP_MODE)
+  {
     unsigned long newBlink = micros();   
     unsigned long interval = newBlink-lastBlink;
-	lastPulse = millis();
+    
-    if (interval<500000L) {
+    if (interval!=0)
-      // Sometimes we get interrupt on RISING,  500000 = 0.5sek debounce ( max 120 l/min)
+    {
-      return;   
+      lastPulse = millis();
+      if (interval<500000L) {
+        // Sometimes we get interrupt on RISING,  500000 = 0.5sek debounce ( max 120 l/min)
+        return;   
+      }
+      flow = (60000000.0 /interval) / ppl;
     }
-    flow = (60000000.0 /interval) / ppl;
     lastBlink = newBlink;
   }
   pulseCount++; 
 }
 
-
-