MySmartHome/MySensors
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Repo restyled using astyle (#683)

Browse Source 
The rules are in .tools/astyle/config/style.cfg
and can also be reviewed at
https://www.mysensors.org/view/260#coding-guidelines-core-library
This commit is contained in:
Patrick Fallberg
2016-12-07 23:44:29 +01:00
committed by GitHub
parent d4c4ab82ea
commit 8e1ef13804
167 changed files with 16103 additions and 15168 deletions
Download Patch File Download Diff File Expand all files Collapse all files
examples/MotionSensorRS485/MotionSensorRS485.ino
+26 -25
View File
@@ -20,18 +20,18 @@
*
* REVISION HISTORY
* Version 1.0 - Henrik Ekblad
*
*
* DESCRIPTION
* This is an example of sensors using RS485 as transport layer
*
* Motion Sensor example using HC-SR501
*
* Motion Sensor example using HC-SR501
* http://www.mysensors.org/build/motion
*
*
* If your Arduino board has additional serial ports
* you can use to connect the RS485 module.
* Otherwise, the transport uses AltSoftSerial to handle two serial
* links on one Arduino. Use the following pins for RS485 link
*
*
* Board Transmit Receive PWM Unusable
* ----- -------- ------- ------------
* Teensy 3.0 & 3.1 21 20 22
@@ -41,8 +41,8 @@
* Arduino Leonardo 5 13 (none)
* Arduino Mega 46 48 44, 45
* Wiring-S 5 6 4
* Sanguino 13 14 12 *
*
* Sanguino 13 14 12 *
*
*/
// Enable debug prints to serial monitor
@@ -51,7 +51,7 @@
// Enable RS485 transport layer
#define MY_RS485
// Define this to enables DE-pin management on defined pin
// Define this to enables DE-pin management on defined pin
#define MY_RS485_DE_PIN 2
// Set RS485 baud rate to use
@@ -69,29 +69,30 @@ unsigned long SLEEP_TIME = 120000; // Sleep time between reports (in millisecond
// Initialize motion message
MyMessage msg(CHILD_ID, V_TRIPPED);
void setup()
{
pinMode(DIGITAL_INPUT_SENSOR, INPUT); // sets the motion sensor digital pin as input
void setup()
{
pinMode(DIGITAL_INPUT_SENSOR, INPUT); // sets the motion sensor digital pin as input
}
void presentation() {
// Send the sketch version information to the gateway and Controller
sendSketchInfo("Motion Sensor", "1.0");
void presentation()
{
// Send the sketch version information to the gateway and Controller
sendSketchInfo("Motion Sensor", "1.0");
// Register all sensors to gw (they will be created as child devices)
present(CHILD_ID, S_MOTION);
// Register all sensors to gw (they will be created as child devices)
present(CHILD_ID, S_MOTION);
}
void loop()
{
// Read digital motion value
bool tripped = digitalRead(DIGITAL_INPUT_SENSOR) == HIGH;
Serial.println(tripped);
send(msg.set(tripped?"1":"0")); // Send tripped value to gw
void loop()
{
// Read digital motion value
bool tripped = digitalRead(DIGITAL_INPUT_SENSOR) == HIGH;
// Sleep until interrupt comes in on motion sensor. Send update every two minute.
sleep(digitalPinToInterrupt(DIGITAL_INPUT_SENSOR), CHANGE, SLEEP_TIME);
Serial.println(tripped);
send(msg.set(tripped?"1":"0")); // Send tripped value to gw
// Sleep until interrupt comes in on motion sensor. Send update every two minute.
sleep(digitalPinToInterrupt(DIGITAL_INPUT_SENSOR), CHANGE, SLEEP_TIME);
}