Repo restyled using astyle (#683)
The rules are in .tools/astyle/config/style.cfg and can also be reviewed at https://www.mysensors.org/view/260#coding-guidelines-core-library
This commit is contained in:
Patrick Fallberg
GitHub
@@ -1,40 +1,40 @@
|
||||
/**
|
||||
* The MySensors Arduino library handles the wireless radio link and protocol
|
||||
* between your home built sensors/actuators and HA controller of choice.
|
||||
* The sensors forms a self healing radio network with optional repeaters. Each
|
||||
* repeater and gateway builds a routing tables in EEPROM which keeps track of the
|
||||
* network topology allowing messages to be routed to nodes.
|
||||
*
|
||||
* Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
|
||||
* Copyright (C) 2013-2015 Sensnology AB
|
||||
* Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
|
||||
*
|
||||
* Documentation: http://www.mysensors.org
|
||||
* Support Forum: http://forum.mysensors.org
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* version 2 as published by the Free Software Foundation.
|
||||
*
|
||||
*******************************
|
||||
*
|
||||
* DESCRIPTION
|
||||
* The ArduinoGateway prints data received from sensors on the serial link.
|
||||
* The gateway accepts input on seral which will be sent out on radio network.
|
||||
*
|
||||
* This GW code is designed for Sensebender GateWay / (Arduino Zero variant)
|
||||
*
|
||||
* Wire connections (OPTIONAL):
|
||||
* - Inclusion button should be connected to SW2
|
||||
*
|
||||
* LEDs on board (default assignments):
|
||||
* - Orange: USB RX/TX - Blink when receiving / transmitting on USB CDC device
|
||||
* - Yellow: RX - Blink fast on radio message recieved. In inclusion mode will blink fast only on presentation recieved
|
||||
* - Green : TX - Blink fast on radio message transmitted. In inclusion mode will blink slowly
|
||||
* - Red : ERR - Fast blink on error during transmission error or recieve crc error
|
||||
* - Blue : free - (use with LED_BLUE macro)
|
||||
*
|
||||
*/
|
||||
/**
|
||||
* The MySensors Arduino library handles the wireless radio link and protocol
|
||||
* between your home built sensors/actuators and HA controller of choice.
|
||||
* The sensors forms a self healing radio network with optional repeaters. Each
|
||||
* repeater and gateway builds a routing tables in EEPROM which keeps track of the
|
||||
* network topology allowing messages to be routed to nodes.
|
||||
*
|
||||
* Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
|
||||
* Copyright (C) 2013-2015 Sensnology AB
|
||||
* Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
|
||||
*
|
||||
* Documentation: http://www.mysensors.org
|
||||
* Support Forum: http://forum.mysensors.org
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* version 2 as published by the Free Software Foundation.
|
||||
*
|
||||
*******************************
|
||||
*
|
||||
* DESCRIPTION
|
||||
* The ArduinoGateway prints data received from sensors on the serial link.
|
||||
* The gateway accepts input on seral which will be sent out on radio network.
|
||||
*
|
||||
* This GW code is designed for Sensebender GateWay / (Arduino Zero variant)
|
||||
*
|
||||
* Wire connections (OPTIONAL):
|
||||
* - Inclusion button should be connected to SW2
|
||||
*
|
||||
* LEDs on board (default assignments):
|
||||
* - Orange: USB RX/TX - Blink when receiving / transmitting on USB CDC device
|
||||
* - Yellow: RX - Blink fast on radio message recieved. In inclusion mode will blink fast only on presentation recieved
|
||||
* - Green : TX - Blink fast on radio message transmitted. In inclusion mode will blink slowly
|
||||
* - Red : ERR - Fast blink on error during transmission error or recieve crc error
|
||||
* - Blue : free - (use with LED_BLUE macro)
|
||||
*
|
||||
*/
|
||||
|
||||
#define SKETCH_VERSION "0.2"
|
||||
// Enable debug prints to serial monitor
|
||||
@@ -92,177 +92,189 @@ Sd2Card card;
|
||||
static uint8_t num_of_leds = 5;
|
||||
static uint8_t leds[] = {LED_BLUE, LED_RED, LED_GREEN, LED_YELLOW, LED_ORANGE};
|
||||
|
||||
void setup() {
|
||||
// Setup locally attached sensors
|
||||
void setup()
|
||||
{
|
||||
// Setup locally attached sensors
|
||||
}
|
||||
|
||||
void presentation() {
|
||||
// Present locally attached sensors
|
||||
void presentation()
|
||||
{
|
||||
// Present locally attached sensors
|
||||
}
|
||||
|
||||
void loop() {
|
||||
// Send locally attached sensor data here
|
||||
void loop()
|
||||
{
|
||||
// Send locally attached sensor data here
|
||||
}
|
||||
|
||||
|
||||
void preHwInit() {
|
||||
void preHwInit()
|
||||
{
|
||||
|
||||
pinMode(MY_SWC1, INPUT_PULLUP);
|
||||
pinMode(MY_SWC2, INPUT_PULLUP);
|
||||
if (digitalRead(MY_SWC1) && digitalRead(MY_SWC2)) return;
|
||||
pinMode(MY_SWC1, INPUT_PULLUP);
|
||||
pinMode(MY_SWC2, INPUT_PULLUP);
|
||||
if (digitalRead(MY_SWC1) && digitalRead(MY_SWC2)) {
|
||||
return;
|
||||
}
|
||||
|
||||
uint8_t tests = 0;
|
||||
uint8_t tests = 0;
|
||||
|
||||
for (int i=0; i< num_of_leds; i++) {
|
||||
pinMode(leds[i], OUTPUT);
|
||||
}
|
||||
uint8_t led_state = 0;
|
||||
if (digitalRead(MY_SWC1)) {
|
||||
while (!Serial) {
|
||||
digitalWrite(LED_BLUE, led_state);
|
||||
led_state ^= 0x01;
|
||||
delay(500);
|
||||
} // Wait for USB to be connected, before spewing out data.
|
||||
}
|
||||
digitalWrite(LED_BLUE, LOW);
|
||||
if (Serial) {
|
||||
Serial.println("Sensebender GateWay test routine");
|
||||
Serial.print("Mysensors core version : ");
|
||||
Serial.println(MYSENSORS_LIBRARY_VERSION);
|
||||
Serial.print("GateWay sketch version : ");
|
||||
Serial.println(SKETCH_VERSION);
|
||||
Serial.println("----------------------------------");
|
||||
Serial.println();
|
||||
}
|
||||
if (testSha204()) {
|
||||
digitalWrite(LED_GREEN, HIGH);
|
||||
tests++;
|
||||
}
|
||||
if (testSDCard()) {
|
||||
digitalWrite(LED_YELLOW, HIGH);
|
||||
tests++;
|
||||
}
|
||||
for (int i=0; i< num_of_leds; i++) {
|
||||
pinMode(leds[i], OUTPUT);
|
||||
}
|
||||
uint8_t led_state = 0;
|
||||
if (digitalRead(MY_SWC1)) {
|
||||
while (!Serial) {
|
||||
digitalWrite(LED_BLUE, led_state);
|
||||
led_state ^= 0x01;
|
||||
delay(500);
|
||||
} // Wait for USB to be connected, before spewing out data.
|
||||
}
|
||||
digitalWrite(LED_BLUE, LOW);
|
||||
if (Serial) {
|
||||
Serial.println("Sensebender GateWay test routine");
|
||||
Serial.print("Mysensors core version : ");
|
||||
Serial.println(MYSENSORS_LIBRARY_VERSION);
|
||||
Serial.print("GateWay sketch version : ");
|
||||
Serial.println(SKETCH_VERSION);
|
||||
Serial.println("----------------------------------");
|
||||
Serial.println();
|
||||
}
|
||||
if (testSha204()) {
|
||||
digitalWrite(LED_GREEN, HIGH);
|
||||
tests++;
|
||||
}
|
||||
if (testSDCard()) {
|
||||
digitalWrite(LED_YELLOW, HIGH);
|
||||
tests++;
|
||||
}
|
||||
|
||||
if (testEEProm()) {
|
||||
digitalWrite(LED_ORANGE, HIGH);
|
||||
tests++;
|
||||
}
|
||||
if (testAnalog()) {
|
||||
digitalWrite(LED_BLUE, HIGH);
|
||||
tests++;
|
||||
}
|
||||
if (tests == 4) {
|
||||
while(1) {
|
||||
for (int i=0; i<num_of_leds; i++) {
|
||||
digitalWrite(leds[i], HIGH);
|
||||
delay(200);
|
||||
digitalWrite(leds[i], LOW);
|
||||
}
|
||||
}
|
||||
}
|
||||
else {
|
||||
while (1) {
|
||||
digitalWrite(LED_RED, HIGH);
|
||||
delay(200);
|
||||
digitalWrite(LED_RED, LOW);
|
||||
delay(200);
|
||||
}
|
||||
}
|
||||
if (testEEProm()) {
|
||||
digitalWrite(LED_ORANGE, HIGH);
|
||||
tests++;
|
||||
}
|
||||
if (testAnalog()) {
|
||||
digitalWrite(LED_BLUE, HIGH);
|
||||
tests++;
|
||||
}
|
||||
if (tests == 4) {
|
||||
while(1) {
|
||||
for (int i=0; i<num_of_leds; i++) {
|
||||
digitalWrite(leds[i], HIGH);
|
||||
delay(200);
|
||||
digitalWrite(leds[i], LOW);
|
||||
}
|
||||
}
|
||||
} else {
|
||||
while (1) {
|
||||
digitalWrite(LED_RED, HIGH);
|
||||
delay(200);
|
||||
digitalWrite(LED_RED, LOW);
|
||||
delay(200);
|
||||
}
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
bool testSha204(){
|
||||
uint8_t rx_buffer[SHA204_RSP_SIZE_MAX];
|
||||
uint8_t ret_code;
|
||||
if (Serial) Serial.print("- > SHA204 ");
|
||||
atsha204_init(MY_SIGNING_ATSHA204_PIN);
|
||||
ret_code = atsha204_wakeup(rx_buffer);
|
||||
bool testSha204()
|
||||
{
|
||||
uint8_t rx_buffer[SHA204_RSP_SIZE_MAX];
|
||||
uint8_t ret_code;
|
||||
if (Serial) {
|
||||
Serial.print("- > SHA204 ");
|
||||
}
|
||||
atsha204_init(MY_SIGNING_ATSHA204_PIN);
|
||||
ret_code = atsha204_wakeup(rx_buffer);
|
||||
|
||||
if (ret_code == SHA204_SUCCESS)
|
||||
{
|
||||
ret_code = atsha204_getSerialNumber(rx_buffer);
|
||||
if (ret_code != SHA204_SUCCESS)
|
||||
{
|
||||
if (Serial) Serial.println(F("Failed to obtain device serial number. Response: ")); Serial.println(ret_code, HEX);
|
||||
}
|
||||
else
|
||||
{
|
||||
if (Serial) {
|
||||
Serial.print(F("Ok (serial : "));
|
||||
for (int i=0; i<9; i++)
|
||||
{
|
||||
if (rx_buffer[i] < 0x10)
|
||||
{
|
||||
Serial.print('0'); // Because Serial.print does not 0-pad HEX
|
||||
}
|
||||
Serial.print(rx_buffer[i], HEX);
|
||||
}
|
||||
Serial.println(")");
|
||||
}
|
||||
return true;
|
||||
}
|
||||
}
|
||||
else {
|
||||
if (Serial) Serial.println(F("Failed to wakeup SHA204"));
|
||||
}
|
||||
return false;
|
||||
if (ret_code == SHA204_SUCCESS) {
|
||||
ret_code = atsha204_getSerialNumber(rx_buffer);
|
||||
if (ret_code != SHA204_SUCCESS) {
|
||||
if (Serial) {
|
||||
Serial.println(F("Failed to obtain device serial number. Response: "));
|
||||
}
|
||||
Serial.println(ret_code, HEX);
|
||||
} else {
|
||||
if (Serial) {
|
||||
Serial.print(F("Ok (serial : "));
|
||||
for (int i=0; i<9; i++) {
|
||||
if (rx_buffer[i] < 0x10) {
|
||||
Serial.print('0'); // Because Serial.print does not 0-pad HEX
|
||||
}
|
||||
Serial.print(rx_buffer[i], HEX);
|
||||
}
|
||||
Serial.println(")");
|
||||
}
|
||||
return true;
|
||||
}
|
||||
} else {
|
||||
if (Serial) {
|
||||
Serial.println(F("Failed to wakeup SHA204"));
|
||||
}
|
||||
}
|
||||
return false;
|
||||
}
|
||||
|
||||
bool testSDCard() {
|
||||
if (Serial) Serial.print("- > SD CARD ");
|
||||
if (!card.init(SPI_HALF_SPEED, MY_SDCARD_CS)) {
|
||||
if (Serial) Serial.println("SD CARD did not initialize!");
|
||||
}
|
||||
else {
|
||||
if (Serial) {
|
||||
Serial.print("SD Card initialized correct! - ");
|
||||
Serial.print("type detected : ");
|
||||
switch(card.type()) {
|
||||
case SD_CARD_TYPE_SD1:
|
||||
Serial.println("SD1");
|
||||
break;
|
||||
case SD_CARD_TYPE_SD2:
|
||||
Serial.println("SD2");
|
||||
break;
|
||||
case SD_CARD_TYPE_SDHC:
|
||||
Serial.println("SDHC");
|
||||
break;
|
||||
default:
|
||||
Serial.println("Unknown");
|
||||
}
|
||||
}
|
||||
return true;
|
||||
}
|
||||
return false;
|
||||
bool testSDCard()
|
||||
{
|
||||
if (Serial) {
|
||||
Serial.print("- > SD CARD ");
|
||||
}
|
||||
if (!card.init(SPI_HALF_SPEED, MY_SDCARD_CS)) {
|
||||
if (Serial) {
|
||||
Serial.println("SD CARD did not initialize!");
|
||||
}
|
||||
} else {
|
||||
if (Serial) {
|
||||
Serial.print("SD Card initialized correct! - ");
|
||||
Serial.print("type detected : ");
|
||||
switch(card.type()) {
|
||||
case SD_CARD_TYPE_SD1:
|
||||
Serial.println("SD1");
|
||||
break;
|
||||
case SD_CARD_TYPE_SD2:
|
||||
Serial.println("SD2");
|
||||
break;
|
||||
case SD_CARD_TYPE_SDHC:
|
||||
Serial.println("SDHC");
|
||||
break;
|
||||
default:
|
||||
Serial.println("Unknown");
|
||||
}
|
||||
}
|
||||
return true;
|
||||
}
|
||||
return false;
|
||||
}
|
||||
|
||||
bool testEEProm() {
|
||||
uint8_t eeprom_d1, eeprom_d2;
|
||||
SerialUSB.print(" -> EEPROM ");
|
||||
Wire.begin();
|
||||
eeprom_d1 = i2c_eeprom_read_byte(EEPROM_VERIFICATION_ADDRESS);
|
||||
delay(500);
|
||||
eeprom_d1 = ~eeprom_d1; // invert the bits
|
||||
i2c_eeprom_write_byte(EEPROM_VERIFICATION_ADDRESS, eeprom_d1);
|
||||
delay(500);
|
||||
eeprom_d2 = i2c_eeprom_read_byte(EEPROM_VERIFICATION_ADDRESS);
|
||||
if (eeprom_d1 == eeprom_d2) {
|
||||
SerialUSB.println("PASSED");
|
||||
i2c_eeprom_write_byte(EEPROM_VERIFICATION_ADDRESS, ~eeprom_d1);
|
||||
return true;
|
||||
}
|
||||
SerialUSB.println("FAILED!");
|
||||
return false;
|
||||
bool testEEProm()
|
||||
{
|
||||
uint8_t eeprom_d1, eeprom_d2;
|
||||
SerialUSB.print(" -> EEPROM ");
|
||||
Wire.begin();
|
||||
eeprom_d1 = i2c_eeprom_read_byte(EEPROM_VERIFICATION_ADDRESS);
|
||||
delay(500);
|
||||
eeprom_d1 = ~eeprom_d1; // invert the bits
|
||||
i2c_eeprom_write_byte(EEPROM_VERIFICATION_ADDRESS, eeprom_d1);
|
||||
delay(500);
|
||||
eeprom_d2 = i2c_eeprom_read_byte(EEPROM_VERIFICATION_ADDRESS);
|
||||
if (eeprom_d1 == eeprom_d2) {
|
||||
SerialUSB.println("PASSED");
|
||||
i2c_eeprom_write_byte(EEPROM_VERIFICATION_ADDRESS, ~eeprom_d1);
|
||||
return true;
|
||||
}
|
||||
SerialUSB.println("FAILED!");
|
||||
return false;
|
||||
}
|
||||
|
||||
bool testAnalog() {
|
||||
int bat_detect = analogRead(MY_BAT_DETECT);
|
||||
Serial.print("-> analog : ");
|
||||
Serial.print(bat_detect);
|
||||
if (bat_detect < 400 || bat_detect > 650) {
|
||||
Serial.println(" Failed");
|
||||
return false;
|
||||
}
|
||||
Serial.println(" Passed");
|
||||
return true;
|
||||
bool testAnalog()
|
||||
{
|
||||
int bat_detect = analogRead(MY_BAT_DETECT);
|
||||
Serial.print("-> analog : ");
|
||||
Serial.print(bat_detect);
|
||||
if (bat_detect < 400 || bat_detect > 650) {
|
||||
Serial.println(" Failed");
|
||||
return false;
|
||||
}
|
||||
Serial.println(" Passed");
|
||||
return true;
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user