diff --git a/libraries/MySensors/examples/DimmableLEDActuator/DimmableLEDActuator.ino b/libraries/MySensors/examples/DimmableLEDActuator/DimmableLEDActuator.ino
new file mode 100644
index 0000000..23188f1
--- /dev/null
+++ b/libraries/MySensors/examples/DimmableLEDActuator/DimmableLEDActuator.ino
@@ -0,0 +1,107 @@
+/***
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ * 
+ * DESCRIPTION
+ * This sketch provides a Dimmable LED Light using PWM and based Henrik Ekblad 
+ * <henrik.ekblad@gmail.com> Vera Arduino Sensor project.  
+ * Developed by Bruce Lacey, inspired by Hek's MySensor's example sketches.
+ * 
+ * The circuit uses a MOSFET for Pulse-Wave-Modulation to dim the attached LED or LED strip.  
+ * The MOSFET Gate pin is connected to Arduino pin 3 (LED_PIN), the MOSFET Drain pin is connected
+ * to the LED negative terminal and the MOSFET Source pin is connected to ground.  
+ *
+ * This sketch is extensible to support more than one MOSFET/PWM dimmer per circuit.
+ *
+ * REVISION HISTORY
+ * Version 1.0 - February 15, 2014 - Bruce Lacey
+ * Version 1.1 - August 13, 2014 - Converted to 1.4 (hek) 
+ *
+ ***/
+#define SN "DimmableLED"
+#define SV "1.1"
+
+#include <MySensor.h> 
+#include <SPI.h>
+
+#define LED_PIN 3      // Arduino pin attached to MOSFET Gate pin
+#define FADE_DELAY 10  // Delay in ms for each percentage fade up/down (10ms = 1s full-range dim)
+
+MySensor gw(9,10);
+
+static int currentLevel = 0;  // Current dim level...
+MyMessage dimmerMsg(0, V_DIMMER);
+MyMessage lightMsg(0, V_LIGHT);
+
+
+/***
+ * Dimmable LED initialization method
+ */
+void setup()  
+{ 
+  Serial.println( SN ); 
+  gw.begin( incomingMessage );
+  
+  // Register the LED Dimmable Light with the gateway
+  gw.present( 0, S_DIMMER );
+  
+  gw.sendSketchInfo(SN, SV);
+  // Pull the gateway's current dim level - restore light level upon sendor node power-up
+  gw.request( 0, V_DIMMER );
+}
+
+/***
+ *  Dimmable LED main processing loop 
+ */
+void loop() 
+{
+  gw.process();
+}
+
+
+
+void incomingMessage(const MyMessage &message) {
+  if (message.type == V_LIGHT || message.type == V_DIMMER) {
+    
+    //  Retrieve the power or dim level from the incoming request message
+    int requestedLevel = atoi( message.data );
+    
+    // Adjust incoming level if this is a V_LIGHT variable update [0 == off, 1 == on]
+    requestedLevel *= ( message.type == V_LIGHT ? 100 : 1 );
+    
+    // Clip incoming level to valid range of 0 to 100
+    requestedLevel = requestedLevel > 100 ? 100 : requestedLevel;
+    requestedLevel = requestedLevel < 0   ? 0   : requestedLevel;
+    
+    Serial.print( "Changing level to " );
+    Serial.print( requestedLevel );
+    Serial.print( ", from " ); 
+    Serial.println( currentLevel );
+
+    fadeToLevel( requestedLevel );
+    
+    // Inform the gateway of the current DimmableLED's SwitchPower1 and LoadLevelStatus value...
+    gw.send(lightMsg.set(currentLevel > 0 ? 1 : 0));
+
+    // hek comment: Is this really nessesary?
+    gw.send( dimmerMsg.set(currentLevel) );
+
+    
+    }
+}
+
+/***
+ *  This method provides a graceful fade up/down effect
+ */
+void fadeToLevel( int toLevel ) {
+
+  int delta = ( toLevel - currentLevel ) < 0 ? -1 : 1;
+  
+  while ( currentLevel != toLevel ) {
+    currentLevel += delta;
+    analogWrite( LED_PIN, (int)(currentLevel / 100. * 255) );
+    delay( FADE_DELAY );
+  }
+}
+