Harmonize transport code (#710)

core/MyTransport.h

@@ -269,11 +269,11 @@ typedef struct {
 // PRIVATE functions
 
 /**
-* @brief Initialise SM variables and transport HW
+* @brief Initialize SM variables and transport HW
 */
 void stInitTransition(void);
 /**
-* @brief Initialise transport
+* @brief Initialize transport
 */
 void stInitUpdate(void);
 /**
@@ -345,7 +345,7 @@ void transportProcessMessage(void);
 /**
 * @brief Assign node ID
 * @param newNodeId New node ID
-* @return true if node ID valid and successfully assigned
+* @return true if node ID is valid and successfully assigned
 */
 bool transportAssignNodeID(const uint8_t newNodeId);
 /**
@@ -409,7 +409,7 @@ void transportInitialize(void);
 void transportProcess(void);
 /**
 * @brief Flag transport ready
-* @return true if transport is initialize and ready
+* @return true if transport is initialized and ready
 */
 bool isTransportReady(void);
 /**
@@ -462,51 +462,6 @@ void transportSetRoute(const uint8_t node, const uint8_t route);
 * @return route to node
 */
 uint8_t transportGetRoute(const uint8_t node);
-
-
-// interface functions for radio driver
-
-/**
-* @brief Initialize transport HW
-* @return true if initialization successful
-*/
-bool transportInit();
-/**
-* @brief Set node address
-*/
-void transportSetAddress(uint8_t address);
-/**
-* @brief Retrieve node address
-*/
-uint8_t transportGetAddress();
-/**
-* @brief Send message
-* @param to recipient
-* @param data message to be sent
-* @param len length of message (header + payload)
-* @return true if message sent successfully
-*/
-bool transportSend(uint8_t to, const void* data, uint8_t len);
-/**
-* @brief Verify if RX FIFO has pending messages
-* @return true if message available in RX FIFO
-*/
-bool transportAvailable();
-/**
-* @brief Sanity check for transport: is transport still responsive?
-* @return true transport ok
-*/
-bool transportSanityCheck();
-/**
-* @brief Receive message from FIFO
-* @return length of recevied message (header + payload)
-*/
-uint8_t transportReceive(void* data);
-/**
-* @brief Power down transport HW
-*/
-void transportPowerDown();
-
 /**
 * @brief Get node ID
 * @return node ID
@@ -523,6 +478,48 @@ uint8_t transportGetParentNodeId(void);
 */
 uint8_t transportGetDistanceGW(void);
 
+// interface functions for radio driver
+
+/**
+* @brief Initialize transport HW
+* @return true if initialization successful
+*/
+bool transportInit(void);
+/**
+* @brief Set node address
+*/
+void transportSetAddress(const uint8_t address);
+/**
+* @brief Retrieve node address
+*/
+uint8_t transportGetAddress(void);
+/**
+* @brief Send message
+* @param to recipient
+* @param data message to be sent
+* @param len length of message (header + payload)
+* @return true if message sent successfully
+*/
+bool transportSend(const uint8_t to, const void* data, const uint8_t len);
+/**
+* @brief Verify if RX FIFO has pending messages
+* @return true if message available in RX FIFO
+*/
+bool transportAvailable(void);
+/**
+* @brief Sanity check for transport: is transport still responsive?
+* @return true if transport HW is ok
+*/
+bool transportSanityCheck(void);
+/**
+* @brief Receive message from FIFO
+* @return length of recevied message (header + payload)
+*/
+uint8_t transportReceive(void* data);
+/**
+* @brief Power down transport HW
+*/
+void transportPowerDown(void);
 
 #endif // MyTransport_h
 /** @}*/

core/MyTransportNRF24.cpp

@@ -94,19 +94,19 @@ uint8_t transportGetAddress(void)
 	return RF24_getNodeID();
 }
 
-bool transportSend(const uint8_t recipient, const void* data, uint8_t len)
+bool transportSend(const uint8_t to, const void* data, const uint8_t len)
 {
 #if defined(MY_RF24_ENABLE_ENCRYPTION)
 	// copy input data because it is read-only
 	(void)memcpy(_dataenc,data,len);
 	// has to be adjusted, WIP!
 	_aes.set_IV(0);
-	len = len > 16 ? 32 : 16;
+	const uint8_t finalLength = len > 16 ? 32 : 16;
 	//encrypt data
-	_aes.cbc_encrypt(_dataenc, _dataenc, len/16);
+	_aes.cbc_encrypt(_dataenc, _dataenc, finalLength /16);
-	return RF24_sendMessage(recipient, _dataenc, len);
+	return RF24_sendMessage(to, _dataenc, finalLength);
 #else
-	return RF24_sendMessage(recipient, data, len);
+	return RF24_sendMessage(to, data, len);
 #endif
 }
 

core/MyTransportRFM69.cpp

@@ -26,7 +26,7 @@ RFM69 _radio(MY_RF69_SPI_CS, MY_RF69_IRQ_PIN, MY_RFM69HW, MY_RF69_IRQ_NUM);
 uint8_t _address;
 
 
-bool transportInit()
+bool transportInit(void)
 {
 	// Start up the radio library (_address will be set later by the MySensors library)
 	if (_radio.initialize(MY_RFM69_FREQUENCY, _address, MY_RFM69_NETWORKID)) {
@@ -41,28 +41,28 @@ bool transportInit()
 	return false;
 }
 
-void transportSetAddress(uint8_t address)
+void transportSetAddress(const uint8_t address)
 {
 	_address = address;
 	_radio.setAddress(address);
 }
 
-uint8_t transportGetAddress()
+uint8_t transportGetAddress(void)
 {
 	return _address;
 }
 
-bool transportSend(uint8_t to, const void* data, uint8_t len)
+bool transportSend(const uint8_t to, const void* data, const uint8_t len)
 {
 	return _radio.sendWithRetry(to,data,len);
 }
 
-bool transportAvailable()
+bool transportAvailable(void)
 {
 	return _radio.receiveDone();
 }
 
-bool transportSanityCheck()
+bool transportSanityCheck(void)
 {
 	// not implemented yet
 	return true;
@@ -80,7 +80,7 @@ uint8_t transportReceive(void* data)
 	return dataLen;
 }
 
-void transportPowerDown()
+void transportPowerDown(void)
 {
 	_radio.sleep();
 }

core/MyTransportRFM95.cpp

@@ -32,7 +32,7 @@ bool transportInit(void)
 	return result;
 }
 
-void transportSetAddress(uint8_t address)
+void transportSetAddress(const uint8_t address)
 {
 	RFM95_setAddress(address);
 }
@@ -42,7 +42,7 @@ uint8_t transportGetAddress(void)
 	return RFM95_getAddress();
 }
 
-bool transportSend(uint8_t to, const void* data, uint8_t len)
+bool transportSend(const uint8_t to, const void* data, const uint8_t len)
 {
 	return RFM95_sendWithRetry(to, data, len);
 }

core/MyTransportRS485.cpp

@@ -239,7 +239,7 @@ bool _serialProcess()
 	return true;
 }
 
-bool transportSend(uint8_t to, const void* data, uint8_t len)
+bool transportSend(const uint8_t to, const void* data, const uint8_t len)
 {
 	const char *datap = static_cast<char const *>(data);
 	unsigned char i;
@@ -319,7 +319,7 @@ bool transportSend(uint8_t to, const void* data, uint8_t len)
 
 
 
-bool transportInit()
+bool transportInit(void)
 {
 	// Reset the state machine
 	_dev.begin(MY_RS485_BAUD_RATE);
@@ -331,24 +331,24 @@ bool transportInit()
 	return true;
 }
 
-void transportSetAddress(uint8_t address)
+void transportSetAddress(const uint8_t address)
 {
 	_nodeId = address;
 }
 
-uint8_t transportGetAddress()
+uint8_t transportGetAddress(void)
 {
 	return _nodeId;
 }
 
 
-bool transportAvailable()
+bool transportAvailable(void)
 {
 	_serialProcess();
 	return _packet_received;
 }
 
-bool transportSanityCheck()
+bool transportSanityCheck(void)
 {
 	// not implemented yet
 	return true;
@@ -365,7 +365,7 @@ uint8_t transportReceive(void* data)
 	}
 }
 
-void transportPowerDown()
+void transportPowerDown(void)
 {
 	// Nothing to shut down here
 }