Merge branch 'development' into development

README.md

@@ -1,7 +1,7 @@
 Arduino
 =======
 
-MySensors Arduino Library v1.5
+MySensors Arduino Library v2.0.0-beta
 
 Please visit www.mysensors.org for more information
 

libraries/MySensors/MyConfig.h

@@ -371,7 +371,17 @@
 
 /**
  * @def MY_RF24_CHANNEL
- * @brief RF channel for the sensor net, 0-127.
+ * @brief RF channel for the sensor net, 0-125.
+ * Frequence: 2400 Mhz - 2525 Mhz Channels: 126
+ * http://www.mysensors.org/radio/nRF24L01Plus.pdf
+ * 0 => 2400 Mhz (RF24 channel 1)
+ * 1 => 2401 Mhz (RF24 channel 2)
+ * 76 => 2476 Mhz (RF24 channel 77)
+ * 83 => 2483 Mhz (RF24 channel 84)
+ * 124 => 2524 Mhz (RF24 channel 125)
+ * 125 => 2525 Mhz (RF24 channel 126)
+ * In some countries there might be limitations, in Germany for example only the range 2400,0 - 2483,5 Mhz is allowed
+ * http://www.bundesnetzagentur.de/SharedDocs/Downloads/DE/Sachgebiete/Telekommunikation/Unternehmen_Institutionen/Frequenzen/Allgemeinzuteilungen/2013_10_WLAN_2,4GHz_pdf.pdf
  */
 #ifndef MY_RF24_CHANNEL
 #define MY_RF24_CHANNEL	76

libraries/MySensors/MySensor.h

@@ -85,7 +85,7 @@
 #endif
 
 // Not necessary to include blinking feature if no LED's are defined!
-#if defined(MY_LEDS_BLINKING_FEATURE) && !defined(MY_DEFAULT_RX_LED_PIN) && !defined(MU_DEFAULT_TX_LED_PIN) && !defined(MY_ERR_LED_PIN)
+#if defined(MY_LEDS_BLINKING_FEATURE) && !defined(MY_DEFAULT_RX_LED_PIN) && !defined(MY_DEFAULT_TX_LED_PIN) && !defined(MY_ERR_LED_PIN)
 	#undef MY_LEDS_BLINKING_FEATURE
 #endif
 
@@ -179,9 +179,10 @@
 	#endif
 	// GATEWAY - COMMON FUNCTIONS
 	// We only support MQTT Client using W5100 and ESP8266 at the moment
-	#if !defined(MY_CONTROLLER_IP_ADDRESS)
+	#if !(defined(MY_CONTROLLER_URL_ADDRESS) || defined(MY_CONTROLLER_IP_ADDRESS))
-		#error You must specify MY_CONTROLLER_IP_ADDRESS (MQTT broker address)
+		#error You must specify MY_CONTROLLER_IP_ADDRESS or MY_CONTROLLER_URL_ADDRESS
 	#endif
+
 	#if !defined(MY_MQTT_PUBLISH_TOPIC_PREFIX)
 		#error You must specify a topic publish prefix MY_MQTT_PUBLISH_TOPIC_PREFIX for this MQTT client
 	#endif

libraries/MySensors/core/MyGatewayTransportEthernet.cpp

@@ -156,7 +156,11 @@ bool gatewayTransportSend(MyMessage &message)
 			ret = _ethernetServer.endPacket();
 		#else
 			EthernetClient client;
-			if (client.connect(_ethernetControllerIP, MY_PORT)) {
+			#if defined(MY_CONTROLLER_URL_ADDRESS)
+				if (client.connect(MY_CONTROLLER_URL_ADDRESS, MY_PORT)) {
+			#else
+				if (client.connect(_ethernetControllerIP, MY_PORT)) {
+			#endif
 				client.write(_ethernetMsg, strlen(_ethernetMsg));
 				client.stop();
 			}

libraries/MySensors/core/MyGatewayTransportMQTTClient.cpp

@@ -28,12 +28,16 @@
 uint8_t protocolH2i(char c);
 
 
-IPAddress _brokerIp(MY_CONTROLLER_IP_ADDRESS);
+#if defined MY_CONTROLLER_IP_ADDRESS
+  IPAddress _brokerIp(MY_CONTROLLER_IP_ADDRESS);
+#endif
 
 #if defined(MY_GATEWAY_ESP8266)
 	#define EthernetClient WiFiClient
-	IPAddress _gatewayIp(MY_IP_GATEWAY_ADDRESS);
+	#if defined(MY_IP_ADDRESS)
-	IPAddress _subnetIp(MY_IP_SUBNET_ADDRESS);
+ 		IPAddress _gatewayIp(MY_IP_GATEWAY_ADDRESS);
+ 		IPAddress _subnetIp(MY_IP_SUBNET_ADDRESS);
+ 	#endif
 #else
 	byte _clientMAC[] = { MY_MAC_ADDRESS };
 #endif
@@ -44,6 +48,7 @@ IPAddress _brokerIp(MY_CONTROLLER_IP_ADDRESS);
 
 EthernetClient _ethClient;
 PubSubClient _client(_ethClient);
+bool _connecting = true;
 bool _available = false;
 char _convBuffer[MAX_PAYLOAD*2+1];
 char _fmtBuffer[MY_GATEWAY_MAX_SEND_LENGTH];
@@ -150,7 +155,13 @@ bool reconnectMQTT() {
 }
 
 bool gatewayTransportInit() {
-	_client.setServer(_brokerIp, MY_PORT);
+	_connecting = true;
+	#if defined(MY_CONTROLLER_IP_ADDRESS)
+		_client.setServer(_brokerIp, MY_PORT);
+	#else
+		_client.setServer(MY_CONTROLLER_URL_ADDRESS, MY_PORT);
+	#endif
+
 	_client.setCallback(incomingMQTT);
 
   	#if defined(MY_GATEWAY_ESP8266)
@@ -164,30 +175,42 @@ bool gatewayTransportInit() {
 			MY_SERIALDEVICE.print(".");
 			yield();
 		}
-		MY_SERIALDEVICE.print(F("IP: "));
+		MY_SERIALDEVICE.print("IP: ");
 		MY_SERIALDEVICE.println(WiFi.localIP());
 	#else
 		#ifdef MY_IP_ADDRESS
 			Ethernet.begin(_clientMAC, _clientIp);
-			MY_SERIALDEVICE.print(F("IP: "));
-			MY_SERIALDEVICE.println(Ethernet.localIP());
 		#else
 			// Get IP address from DHCP
-			Ethernet.begin(_clientMAC);
+			if (!Ethernet.begin(_clientMAC))
-			MY_SERIALDEVICE.print(F("IP: "));
+			{
+				MY_SERIALDEVICE.print("DHCP FAILURE...");
+				_connecting = false;
+				return false;
+			}
+			MY_SERIALDEVICE.print("IP: ");
 			MY_SERIALDEVICE.println(Ethernet.localIP());
-		#endif /* IP_ADDRESS_DHCP */
+		#endif
+
 		// give the Ethernet interface a second to initialize
 		// TODO: use HW delay
 		wait(1000);
 	#endif
+	_connecting = false;
 	return true;
 }
 
 
 bool gatewayTransportAvailable() {
+	if (_connecting)
+		return false;
+
+	//keep lease on dhcp address
+	//Ethernet.maintain();
 	if (!_client.connected()) {
-		reconnectMQTT();
+		//reinitialise client
+		if (gatewayTransportInit())
+			reconnectMQTT();
 		return false;
 	}
 	_client.loop();

libraries/MySensors/core/MySensorCore.cpp

@@ -123,8 +123,6 @@ void _begin() {
 	#elif defined(MY_RADIO_FEATURE)
 		// Read settings from eeprom
 		hwReadConfigBlock((void*)&_nc, (void*)EEPROM_NODE_ID_ADDRESS, sizeof(NodeConfig));
-		// Read latest received controller configuration from EEPROM
-		hwReadConfigBlock((void*)&_cc, (void*)EEPROM_CONTROLLER_CONFIG_ADDRESS, sizeof(ControllerConfig));
 		#ifdef MY_OTA_FIRMWARE_FEATURE
 			// Read firmware config from EEPROM, i.e. type, version, CRC, blocks
 			hwReadConfigBlock((void*)&_fc, (void*)EEPROM_FIRMWARE_TYPE_ADDRESS, sizeof(NodeFirmwareConfig));

libraries/MySensors/drivers/RF24/RF24.cpp

@@ -388,7 +388,7 @@ RF24::RF24(uint8_t _cepin, uint8_t _cspin):
 
 void RF24::setChannel(uint8_t channel)
 {
-  const uint8_t max_channel = 127;
+  const uint8_t max_channel = 125;
   write_register(RF_CH,min(channel,max_channel));
 }
 

libraries/MySensors/drivers/RF24/RF24.h

@@ -601,7 +601,7 @@ public:
   /**
    * Set RF communication channel
    *
-   * @param channel Which RF channel to communicate on, 0-127
+   * @param channel Which RF channel to communicate on, 0-125
    */
   void setChannel(uint8_t channel);
 

libraries/MySensors/examples/GatewayW5100MQTTClient/GatewayW5100MQTTClient.ino

@@ -103,8 +103,8 @@
 #define MY_IP_GATEWAY_ADDRESS 192,168,178,1
 #define MY_IP_SUBNET_ADDRESS 255,255,255,0
 
-
+// MQTT broker ip address or url. Define one or the other. 
-// MQTT broker ip address.  
+//#define MY_CONTROLLER_URL_ADDRESS "m20.cloudmqtt.com"
 #define MY_CONTROLLER_IP_ADDRESS 192, 168, 178, 68
 
 // The MQTT broker port to to open