diff --git a/libraries/MySensors/examples/AirQualitySensor/AirQuality-CO2-MH-Z14.ino b/libraries/MySensors/examples/AirQualitySensor/AirQuality-CO2-MH-Z14.ino
deleted file mode 100644
index a9cbca7..0000000
--- a/libraries/MySensors/examples/AirQualitySensor/AirQuality-CO2-MH-Z14.ino
+++ /dev/null
@@ -1,100 +0,0 @@
-/**
- * The MySensors Arduino library handles the wireless radio link and protocol
- * between your home built sensors/actuators and HA controller of choice.
- * The sensors forms a self healing radio network with optional repeaters. Each
- * repeater and gateway builds a routing tables in EEPROM which keeps track of the
- * network topology allowing messages to be routed to nodes.
- *
- * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
- * Copyright (C) 2013-2015 Sensnology AB
- * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
- *
- * Documentation: http://www.mysensors.org
- * Support Forum: http://forum.mysensors.org
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- *******************************
- *
- * DESCRIPTION
- *
- *  MH-Z14 CO2 sensor
- * 
- *  Wiring:
- *   Pad 1, Pad 5: Vin (Voltage input 4.5V-6V) 
- *   Pad 2, Pad 3, Pad 12: GND 
- *   Pad 6: PWM output ==> pin 6
- *
- *	From: http://davidegironi.blogspot.fr/2014/01/co2-meter-using-ndir-infrared-mh-z14.html
- * 	  MH-Z14 has a PWM output, with a sensitivity range of 0ppm to 2000ppm CO2, an accurancy of ±200ppm.
- * 	  The cycle is 1004ms±5%, given the duty cicle Th (pulse high), Tl is 1004-Th, we can convert it to CO2 value using the formula:
- *	  CO2ppm = 2000 * (Th - 2ms) /(Th + Tl - 4ms)
- * 	From: http://airqualityegg.wikispaces.com/Sensor+Tests
- *	  - response time is less than 30 s
- *   - 3 minute warm up time
- *	datasheet: http://www.futurlec.com/Datasheet/Sensor/MH-Z14.pdf
-* Contributor: epierre
-**/
-
-
-#include <MySensor.h>  
-#include <SPI.h>
-
-#define CHILD_ID_AIQ 0
-#define AIQ_SENSOR_ANALOG_PIN 6
-
-unsigned long SLEEP_TIME = 30*1000; // Sleep time between reads (in milliseconds)
-
-float valAIQ =0.0;
-float lastAIQ =0.0;
-
-MySensor gw;
-MyMessage msg(CHILD_ID_AIQ, V_LEVEL);
-MyMessage msg2(CHILD_ID_AIQ, V_UNIT_PREFIX);
-
-void setup()  
-{
-  gw.begin();
-
-  // Send the sketch version information to the gateway and Controller
-  gw.sendSketchInfo("AIQ Sensor CO2 MH-Z14", "1.0");
-
-  // Register all sensors to gateway (they will be created as child devices)
-  gw.present(CHILD_ID_AIQ, S_AIR_QUALITY);  
-  gw.send(msg2.set("ppm"));
-  
-  gw.sleep(SLEEP_TIME);
-  
-  pinMode(AIQ_SENSOR_ANALOG_PIN, INPUT);
-   
-}
-
-void loop() { 
-
-  //unsigned long duration = pulseIn(AIQ_SENSOR_ANALOG_PIN, HIGH);
-  while(digitalRead(AIQ_SENSOR_ANALOG_PIN) == HIGH) {;}
-  //wait for the pin to go HIGH and measure HIGH time
-  unsigned long duration = pulseIn(AIQ_SENSOR_ANALOG_PIN, HIGH);
-  
-  //Serial.print(duration/1000); Serial.println(" ms ");
-  //from datasheet
-	//CO2 ppm = 2000 * (Th - 2ms) / (Th + Tl - 4ms)
-	//  given Tl + Th = 1004
-	//        Tl = 1004 - Th
-	//        = 2000 * (Th - 2ms) / (Th + 1004 - Th -4ms)
-	//        = 2000 * (Th - 2ms) / 1000 = 2 * (Th - 2ms)
-  long co2ppm = 2 * ((duration/1000) - 2);
-  //Serial.print(co2ppm);
-  if ((co2ppm != lastAIQ)&&(abs(co2ppm-lastAIQ)>=10)) {
-      gw.send(msg.set((long)ceil(co2ppm)));
-      lastAIQ = ceil(co2ppm);
-  }
-  
-  //Serial.println();
-  
-  // Power down the radio.  Note that the radio will get powered back up
-  // on the next write() call.
-  gw.sleep(SLEEP_TIME); //sleep for: sleepTime
-}