MySmartHome/MySensors
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Add support for PTY to RPi serial gateway

Browse Source
This commit is contained in:
Marcelo Aquino
2016-09-03 12:39:37 -03:00
parent f0c5a993d5
commit b4f4e28545
9 changed files with 198 additions and 56 deletions
Download Patch File Download Diff File Expand all files Collapse all files
configure
Vendored
+20 -17
View File
@@ -11,12 +11,7 @@ Options:
Help:
-h, --help print this message
Driver options:
--driver=[SPIDEV|MRAA|RPi|LittleWire]
Driver for RF24 library. [configure autodetected]
Building options:
--os=[LINUX|DARWIN] Operating system. [configure autodetected]
--soc=[BCM2835|BCM2836|AM33XX|A10|A13|A20|H3]
SoC type to be used. [configure autodetected]
--cpu-flags=<CXXFLAGS> CPU defining/optimizing flags to be used. [configure autodetected]
@@ -33,12 +28,10 @@ Installation options:
MySensors options:
--my-debug=[enable|disable]
Enables or disables debugging.
Default to enable.
Enables or disables debugging. [enable]
--my-config-file=<FILE> Config file path. [/etc/mysensors.dat]
--my-gateway=[none|ethernet|serial|mqtt]
Gateway type, set to none to disable gateway feature.
Default to ethernet.
Gateway type, set to none to disable gateway feature. [ethernet]
--my-controller-url-address=<URL>
Controller or MQTT broker url.
--my-controller-ip-address=<IP>
@@ -48,21 +41,25 @@ MySensors options:
If gateway is set to mqtt, it sets the broker port.
--my-serial-port=<PORT> Serial port. [/dev/ttyUSB0]
--my-serial-baudrate=<BAUD> Serial baud rate. [115200]
--my-serial-is-pty Set the serial port to be a pseudo terminal. Use this if you want
to connect to a controller running on the same device.
--my-serial-pty=<NAME> Symlink name for the PTY device. [/dev/ttyMySensorsGateway]
--my-serial-groupname=<GROUP>
Grant access to the specified system group for the serial device.
--my-mqtt-client-id=<ID> MQTT client id.
--my-mqtt-publish-topic-prefix=<PREFIX>
MQTT publish topic prefix.
--my-mqtt-subscribe-topic-prefix=<PREFIX>
MQTT subscribe topic prefix.
--my-radio=[none|nrf24] Radio type, set to none to disable radio feature.
Default to rf24.
--my-radio=[none|nrf24] Radio type, set to none to disable radio feature. [rf24]
--my-rf24-channel=<0-125> RF channel for the sensor net, 0-125.
--my-rf24-pa-level=[RF24_PA_MAX|RF24_PA_LOW]
RF24 PA level.
--my-rf24-irq-pin=<PIN> Pin number connected to nRF24L01 IRQ pin.
For RaspberryPi use BCM numbering.
--my-rx-message-buffer-size=<SIZE>
Buffer size for incoming messages when using rf24 interrupts.
Default is 20.
Buffer size for incoming messages when using rf24 interrupts. [20]
EOF
}
@@ -202,7 +199,7 @@ debug=enable
gateway_type=ethernet
radio_type=nrf24
params="OS SOC CXXFLAGS LDFLAGS PREFIX CXX RF24H_LIB_DIR GATEWAY_DIR INIT_SYSTEM"
params="SOC CXXFLAGS LDFLAGS PREFIX CXX RF24H_LIB_DIR GATEWAY_DIR INIT_SYSTEM"
for opt do
if [ "$opt" = "-h" ] || [ "$opt" = "--help" ]; then
@@ -211,9 +208,6 @@ for opt do
fi
optarg="${opt#*=}"
case "$opt" in
--os=*)
OS="$optarg"
;;
--soc=*)
SOC="$optarg"
;;
@@ -259,6 +253,15 @@ for opt do
--my-serial-baudrate=*)
CXXFLAGS="-DMY_BAUD_RATE=${optarg} $CXXFLAGS"
;;
--my-serial-is-pty*)
CXXFLAGS="-DMY_IS_SERIAL_PTY $CXXFLAGS"
;;
--my-serial-pty=*)
CXXFLAGS="-DMY_LINUX_SERIAL_PTY=\\\"${optarg}\\\" $CXXFLAGS"
;;
--my-serial-groupname=*)
CXXFLAGS="-DMY_LINUX_SERIAL_GROUPNAME=\\\"${optarg}\\\" $CXXFLAGS"
;;
--my-rf24-channel=*)
CXXFLAGS="-DMY_RF24_CHANNEL=${optarg} $CXXFLAGS"
;;