diff --git a/MyConfig.h b/MyConfig.h
index c08b1f2..8a48503 100644
--- a/MyConfig.h
+++ b/MyConfig.h
@@ -817,6 +817,18 @@
  */
 //#define MY_DEBUG_VERBOSE_RFM95
 
+/**
+ * @def MY_RFM95_ENABLE_ENCRYPTION
+ * @brief Define this to enable software based %AES encryption.
+ *
+ * All nodes and gateway must have this enabled, and all must be personalized with the same %AES
+ * key.
+ * @see @ref personalization
+ *
+ * @warning This driver always sets the initialization vector to 0 so encryption is weak.
+ */
+//#define MY_RFM95_ENABLE_ENCRYPTION
+
 /**
  * @def MY_RFM95_FREQUENCY
  * @brief The frequency to use.
@@ -1799,7 +1811,7 @@
 /**
  * @def MY_SIGNING_FEATURE
  * @ingroup internals
- * @brief Helper flag to indicate that some signing feature is enabled
+ * @brief Helper flag to indicate that some signing feature is enabled, set automatically
  */
 #if defined(MY_SIGNING_ATSHA204) || defined(MY_SIGNING_SOFT)
 #define MY_SIGNING_FEATURE
@@ -1812,7 +1824,7 @@
  * @brief These options control encryption related configurations.
  *
  * Note that encryption is toggled on a per-radio basis.
- * @see MY_RF24_ENABLE_ENCRYPTION, MY_RFM69_ENABLE_ENCRYPTION, MY_NRF5_ESB_ENABLE_ENCRYPTION
+ * @see MY_RF24_ENABLE_ENCRYPTION, MY_RFM69_ENABLE_ENCRYPTION, MY_NRF5_ESB_ENABLE_ENCRYPTION, MY_RFM95_ENABLE_ENCRYPTION
  * @{
  */
 
@@ -1845,14 +1857,18 @@
 #ifndef MY_NRF5_ESB_ENABLE_ENCRYPTION
 #define MY_NRF5_ESB_ENABLE_ENCRYPTION
 #endif
+#ifndef MY_RFM95_ENABLE_ENCRYPTION
+#define MY_RFM95_ENABLE_ENCRYPTION
+#endif
 #endif
 
 /**
  * @def MY_ENCRYPTION_FEATURE
  * @ingroup internals
- * @brief Helper flag to indicate that some encryption feature is enabled
+ * @brief Helper flag to indicate that some encryption feature is enabled, set automatically
+ * @see MY_RF24_ENABLE_ENCRYPTION, MY_RFM69_ENABLE_ENCRYPTION, MY_NRF5_ESB_ENABLE_ENCRYPTION, MY_RFM95_ENABLE_ENCRYPTION
  */
-#if defined(MY_RF24_ENABLE_ENCRYPTION) || defined(MY_RFM69_ENABLE_ENCRYPTION) || defined(MY_NRF5_ESB_ENABLE_ENCRYPTION)
+#if defined(MY_RF24_ENABLE_ENCRYPTION) || defined(MY_RFM69_ENABLE_ENCRYPTION) || defined(MY_NRF5_ESB_ENABLE_ENCRYPTION) || defined(MY_RFM95_ENABLE_ENCRYPTION)
 #define MY_ENCRYPTION_FEATURE
 #endif
 /** @}*/ // End of EncryptionSettingGrpPub group
@@ -2303,6 +2319,7 @@
 // RFM95
 #define MY_RADIO_RFM95
 #define MY_DEBUG_VERBOSE_RFM95
+#define MY_RFM95_ENABLE_ENCRYPTION
 #define MY_RFM95_ATC_MODE_DISABLED
 #define MY_RFM95_RST_PIN
 #define MY_RFM95_MODEM_CONFIGRUATION
diff --git a/configure b/configure
index dcca71b..b545e29 100755
--- a/configure
+++ b/configure
@@ -85,6 +85,10 @@ MySensors options:
                                 Enables RFM69 encryption.
                                 All nodes and gateway must have this enabled, and all must be
                                 personalized with the same AES key.
+     --my-rfm95-encryption-enabled
+                                Enables RFM95 encryption.
+                                All nodes and gateway must have this enabled, and all must be
+                                personalized with the same AES key.
     --my-rs485-serial-port=<PORT>
                                 RS485 serial port. You must provide a port.
     --my-rs485-baudrate=<BAUD>  RS485 baudrate. [9600]
@@ -450,6 +454,10 @@ for opt do
         encryption=true
         CPPFLAGS="-DMY_RFM69_ENABLE_ENCRYPTION $CPPFLAGS"
         ;;
+    --my-rfm95-encryption-enabled*)
+        encryption=true
+        CPPFLAGS="-DMY_RFM95_ENABLE_ENCRYPTION $CPPFLAGS"
+        ;;
     --my-rs485-serial-port=*)
         CPPFLAGS="-DMY_RS485_HWSERIAL=\\\"${optarg}\\\" $CPPFLAGS"
         ;;
diff --git a/core/MyCapabilities.h b/core/MyCapabilities.h
index d83875c..629ea6b 100644
--- a/core/MyCapabilities.h
+++ b/core/MyCapabilities.h
@@ -218,14 +218,14 @@
  * @def MY_CAP_ENCR
  * @brief Indicate the encryption setting.
  *
- * @see MY_RF24_ENABLE_ENCRYPTION, MY_RFM69_ENABLE_ENCRYPTION, MY_NRF5_ESB_ENABLE_ENCRYPTION
+ * @see MY_ENCRYPTION_FEATURE
  *
  * | Setting    | Indicator
  * |------------|----------
  * | Enabled    | X
  * | Disabled   | -
  */
-#if defined(MY_RF24_ENABLE_ENCRYPTION) || defined(MY_RFM69_ENABLE_ENCRYPTION) || defined (MY_NRF5_ESB_ENABLE_ENCRYPTION)
+#if defined(MY_ENCRYPTION_FEATURE)
 #define MY_CAP_ENCR "X"
 #else
 #define MY_CAP_ENCR "-"
diff --git a/hal/transport/RFM95/MyTransportRFM95.cpp b/hal/transport/RFM95/MyTransportRFM95.cpp
index 7003012..5e3bd64 100644
--- a/hal/transport/RFM95/MyTransportRFM95.cpp
+++ b/hal/transport/RFM95/MyTransportRFM95.cpp
@@ -18,6 +18,14 @@
  */
 
 #include "drivers/RFM95/RFM95.h"
+#if defined(MY_RFM95_ENABLE_ENCRYPTION)
+#include "drivers/AES/AES.h"
+#endif
+
+#if defined(MY_RFM95_ENABLE_ENCRYPTION)
+AES RFM95_aes;
+uint8_t RFM95_dataenc[32] = {0};
+#endif
 
 #if defined(MY_RFM95_ENABLE_ENCRYPTION)
 #include "drivers/AES/AES.cpp"
@@ -25,6 +33,20 @@
 
 bool transportInit(void)
 {
+#if defined(MY_RFM95_ENABLE_ENCRYPTION)
+	uint8_t RFM95_psk[16];
+#ifdef MY_SIGNING_SIMPLE_PASSWD
+	memset(RFM95_psk, 0, 16);
+	memcpy(RFM95_psk, MY_SIGNING_SIMPLE_PASSWD, strnlen(MY_SIGNING_SIMPLE_PASSWD, 16));
+#else
+	hwReadConfigBlock((void*)RFM95_psk, (void*)EEPROM_RF_ENCRYPTION_AES_KEY_ADDRESS, 16);
+#endif
+	//set up AES-key
+	RFM95_aes.set_key(RFM95_psk, 16);
+	// Make sure it is purged from memory when set
+	memset(RFM95_psk, 0, 16);
+#endif
+
 	const bool result = RFM95_initialise(MY_RFM95_FREQUENCY);
 #if defined(MY_RFM95_TCXO)
 	RFM95_enableTCXO();
@@ -48,11 +70,26 @@ uint8_t transportGetAddress(void)
 
 bool transportSend(const uint8_t to, const void *data, const uint8_t len, const bool noACK)
 {
+#if defined(MY_RFM95_ENABLE_ENCRYPTION)
+	// copy input data because it is read-only
+	(void)memcpy(RFM95_dataenc,data,len);
+	// has to be adjusted, WIP!
+	RFM95_aes.set_IV(0);
+	const uint8_t finalLength = len > 16 ? 32 : 16;
+	//encrypt data
+	RFM95_aes.cbc_encrypt(RFM95_dataenc, RFM95_dataenc, finalLength /16);
+	if (noACK) {
+		(void)RFM95_sendWithRetry(to, RFM95_dataenc, finalLength, 0, 0);
+		return true;
+	}
+	return RFM95_sendWithRetry(to, RFM95_dataenc, finalLength);
+#else
 	if (noACK) {
 		(void)RFM95_sendWithRetry(to, data, len, 0, 0);
 		return true;
 	}
 	return RFM95_sendWithRetry(to, data, len);
+#endif
 }
 
 bool transportAvailable(void)
@@ -68,7 +105,15 @@ bool transportSanityCheck(void)
 
 uint8_t transportReceive(void *data)
 {
-	const uint8_t len = RFM95_receive((uint8_t *)data, MAX_MESSAGE_LENGTH);
+	uint8_t len = RFM95_receive((uint8_t*)data, MAX_MESSAGE_LENGTH);
+#if defined(MY_RFM95_ENABLE_ENCRYPTION)
+	// has to be adjusted, WIP!
+	RFM95_aes.set_IV(0);
+	// decrypt data
+	if (RFM95_aes.cbc_decrypt((uint8_t*)(data), (uint8_t*)(data), len > 16 ? 2 : 1) != AES_SUCCESS) {
+		len = 0;
+	}
+#endif
 	return len;
 }
 
diff --git a/keywords.txt b/keywords.txt
index b22e5fd..2643bae 100644
--- a/keywords.txt
+++ b/keywords.txt
@@ -192,6 +192,7 @@ MY_RFM95_TCXO	LITERAL1
 MY_RFM95_TX_POWER	LITERAL1
 MY_RFM95_TX_POWER_DBM	LITERAL1
 MY_RFM95_TX_TIMEOUT_MS	LITERAL1
+MY_RFM95_ENABLE_ENCRYPTION	LITERAL1
 
 # RFM69
 MY_DEBUG_VERBOSE_RFM69	LITERAL1
diff --git a/tests/Arduino/sketches/hard_signing_whitelisting_full_debug_rfm95_rsa/hard_signing_whitelisting_full_debug_rfm95_rsa.ino b/tests/Arduino/sketches/hard_signing_whitelisting_full_debug_rfm95_rsa/hard_signing_whitelisting_full_debug_rfm95_rsa.ino
index 510c72c..67fc11e 100644
--- a/tests/Arduino/sketches/hard_signing_whitelisting_full_debug_rfm95_rsa/hard_signing_whitelisting_full_debug_rfm95_rsa.ino
+++ b/tests/Arduino/sketches/hard_signing_whitelisting_full_debug_rfm95_rsa/hard_signing_whitelisting_full_debug_rfm95_rsa.ino
@@ -33,6 +33,6 @@
 #ifndef MY_SIGNING_ATSHA204_PIN
 #define MY_SIGNING_ATSHA204_PIN 17
 #endif
-#define MY_RFM69_ENABLE_ENCRYPTION
+#define MY_RFM95_ENABLE_ENCRYPTION
 
 #include <MySensors.h>