fixed crlf for project

2014-03-07 21:17:56 +01:00
parent 586a4d6239
commit c1441dca4a
62 changed files with 6964 additions and 6964 deletions
@@ -1,79 +1,79 @@
-#include <spi.h>
-#include <ds1305.h>
-
-#define DS1305_PIN 4
-#define LED_PIN 3
-
-// following two methods required by DS1305 library to select/deselect device
-void select_ds1305(void)
-{
-  digitalWrite(DS1305_PIN, HIGH);
-}
-
-void deselect_ds1305(void)
-{
-  digitalWrite(DS1305_PIN, LOW);
-}
-
-// flash led that's connected to pin 3
-void flash_led(void)
-{
-  pinMode(LED_PIN, OUTPUT);
-  for (int i=0; i<10; i++) {
-    digitalWrite(LED_PIN, i%2==0);
-    delay(50);
-  }
-}
-
-// called when pin INT0 goes from 1 to 0
-ISR(INT0_vect)
-{
-  // get alarm value to clear alarm interrupt flag on DS1305
-  DS1305_DATETIME alarm;
-  get_alarm0(&alarm);
-  flash_led();
-}
-
-void setup()
-{
-  // flash LED at start to indicate were about to start
-  flash_led();
-  flash_led();
-  
-  // pin used to enable DS1305
-  pinMode(DS1305_PIN, OUTPUT);
-
-  // Make sure ADC is unselected and setup spi
-  deselect_ds1305();
-  setup_spi(SPI_MODE_1, SPI_MSB, SPI_NO_INTERRUPT, SPI_MSTR_CLK16);
-  set_control(0);
-
-  // set current date/time to Thursday 06/05/09 20:32:30
-  DS1305_DATETIME current = {0x30, 0x32, 0x20, 0x05, 0x06, 0x05, 0x09};
-  set_time(&current);
-  
-  // change the value of alarm to the required time/granularity:
-  // raise alarm every day (at 20:32:00):
-  // DS1305_DATETIME alarm = {0x00, 0x32, 0x20, 0x00 | DS1305_ALARM_SET};
-  // raise alarm every minute (when seconds = 00):
-  // DS1305_DATETIME alarm = {0x00, 0x32 | DS1305_ALARM_SET,
-  //		   0x20 | DS1305_ALARM_SET, 0x05 | DS1305_ALARM_SET};
-  // raise alarm every second:
-  DS1305_DATETIME alarm = {0x55 | DS1305_ALARM_SET, 0x32 | DS1305_ALARM_SET,
-			   0x20 | DS1305_ALARM_SET, 0x05 | DS1305_ALARM_SET};
-  set_alarm0(&alarm);
-  // turn on timer and make alarm0 lower INT0 pin when alarm is triggered
-  set_control(DS1305_EOSC | DS1305_INTCN | DS1305_AIE0);
-
-  // raise interrupt when INT0 pin falls (pin PD0 at AT90usbXXX, pin PD2 on ATmegaXXX (arduino pin 2))
-  // the code in ISR(INT0_vect) above will be called
-  EICRA = (1<<ISC01) | (0<<ISC00);
-  // enable interrupts
-  EIMSK = (1<<INT0);
-  sei();
-}
-
-void loop()
-{
-  // do nothing - all action happens in interrupt
-}
+#include <spi.h>
+#include <ds1305.h>
+
+#define DS1305_PIN 4
+#define LED_PIN 3
+
+// following two methods required by DS1305 library to select/deselect device
+void select_ds1305(void)
+{
+  digitalWrite(DS1305_PIN, HIGH);
+}
+
+void deselect_ds1305(void)
+{
+  digitalWrite(DS1305_PIN, LOW);
+}
+
+// flash led that's connected to pin 3
+void flash_led(void)
+{
+  pinMode(LED_PIN, OUTPUT);
+  for (int i=0; i<10; i++) {
+    digitalWrite(LED_PIN, i%2==0);
+    delay(50);
+  }
+}
+
+// called when pin INT0 goes from 1 to 0
+ISR(INT0_vect)
+{
+  // get alarm value to clear alarm interrupt flag on DS1305
+  DS1305_DATETIME alarm;
+  get_alarm0(&alarm);
+  flash_led();
+}
+
+void setup()
+{
+  // flash LED at start to indicate were about to start
+  flash_led();
+  flash_led();
+  
+  // pin used to enable DS1305
+  pinMode(DS1305_PIN, OUTPUT);
+
+  // Make sure ADC is unselected and setup spi
+  deselect_ds1305();
+  setup_spi(SPI_MODE_1, SPI_MSB, SPI_NO_INTERRUPT, SPI_MSTR_CLK16);
+  set_control(0);
+
+  // set current date/time to Thursday 06/05/09 20:32:30
+  DS1305_DATETIME current = {0x30, 0x32, 0x20, 0x05, 0x06, 0x05, 0x09};
+  set_time(&current);
+  
+  // change the value of alarm to the required time/granularity:
+  // raise alarm every day (at 20:32:00):
+  // DS1305_DATETIME alarm = {0x00, 0x32, 0x20, 0x00 | DS1305_ALARM_SET};
+  // raise alarm every minute (when seconds = 00):
+  // DS1305_DATETIME alarm = {0x00, 0x32 | DS1305_ALARM_SET,
+  //		   0x20 | DS1305_ALARM_SET, 0x05 | DS1305_ALARM_SET};
+  // raise alarm every second:
+  DS1305_DATETIME alarm = {0x55 | DS1305_ALARM_SET, 0x32 | DS1305_ALARM_SET,
+			   0x20 | DS1305_ALARM_SET, 0x05 | DS1305_ALARM_SET};
+  set_alarm0(&alarm);
+  // turn on timer and make alarm0 lower INT0 pin when alarm is triggered
+  set_control(DS1305_EOSC | DS1305_INTCN | DS1305_AIE0);
+
+  // raise interrupt when INT0 pin falls (pin PD0 at AT90usbXXX, pin PD2 on ATmegaXXX (arduino pin 2))
+  // the code in ISR(INT0_vect) above will be called
+  EICRA = (1<<ISC01) | (0<<ISC00);
+  // enable interrupts
+  EIMSK = (1<<INT0);
+  sei();
+}
+
+void loop()
+{
+  // do nothing - all action happens in interrupt
+}