fixed crlf for project
This commit is contained in:
Henrik Ekblad
@@ -1,62 +1,62 @@
|
||||
RemoteSensor library v1.0.1 (20120213) for Arduino 1.0
|
||||
Made by Randy Simons http://randysimons.nl/
|
||||
|
||||
This library provides an easy class for Arduino, to send and receive signals
|
||||
used by some common weather stations using remote 433MHz sensors, like those
|
||||
made by Cresta.
|
||||
E.g. http://www.cresta.nl/index.php?Itemid=2&option=com_zoo&view=item&category_id=32&item_id=281&lang=en
|
||||
|
||||
Cresta is just a brandname. The original OEM seems to be Hideki Electronics.
|
||||
There are other brands which use the same hardware and / or protocol. As far
|
||||
as I know these include Mebus, Irox, Honeywell, Cresta and RST.
|
||||
|
||||
This software is based on the work of Oopsje. See docs/CrestaProtocol.pdf
|
||||
|
||||
See SensorTransmitter.h and SensorReciver.h for details!
|
||||
|
||||
License: GPLv3. See ./RemoteSensor/license.txt
|
||||
|
||||
Latest source and wiki: https://bitbucket.org/fuzzillogic/433mhzforarduino
|
||||
|
||||
|
||||
Installation of library:
|
||||
- Make sure Arduino is closed
|
||||
- Copy the directory RemoteSensor to the Arduino library directory (usually
|
||||
<Sketchbook directory>/libraries/)
|
||||
See http://arduino.cc/en/Guide/Libraries for detailed instructions.
|
||||
|
||||
Default installation sender & demo:
|
||||
- Connect tha data-in-pin of a 433MHz transmitter to digital pin 11. See
|
||||
docs/hardware setup.jpg.
|
||||
(Note: your hardware may have a different pin configuration!)
|
||||
- Start Arduino, and open the example: File -> Examples -> RemoteSensor ->
|
||||
ThermoHygroTransmitter
|
||||
- Alter addresses/devices to reflect your own setup. Otherwise nothing will
|
||||
happen.
|
||||
- Compile, upload and run!
|
||||
|
||||
Default installation receiver & demo:
|
||||
- Connect the data-out-pin of a 433MHz receiver to digital pin 2. See photo.
|
||||
(Note: your hardware may have a different pin configuration!)
|
||||
- Start Arduino, and open the example: File -> Examples -> RemoteSensor ->
|
||||
ThermoHygroReceiver
|
||||
- Compile, upload and run
|
||||
- Open serial monitor in Arduino (115200 baud)
|
||||
- Wait for your 433MHz-sensor to transmit (less than 1 minute), and watch the
|
||||
serial monitor
|
||||
|
||||
|
||||
Changelog:
|
||||
RemoteSensor library v1.0.2 (20130601) for Arduino 1.0
|
||||
- Reduced memory usage (Flash, RAM). Because of this, a small backwards
|
||||
incompatibility is introduced: The last parameter of
|
||||
SensorReceiver::decodeThermoHygro now is a byte instead of short.
|
||||
- Dropped support for Arduino pre-1.0
|
||||
|
||||
RemoteSensor library v1.0.1 (20120213) for Arduino 0022/1.0
|
||||
- Ignore obviously too short or too long signals in SensorReceiver, for better
|
||||
recognition rate.
|
||||
- Support for Arduino 1.0.
|
||||
|
||||
RemoteSensor library v1.0.0 (20110919) for Arduino 0022
|
||||
RemoteSensor library v1.0.1 (20120213) for Arduino 1.0
|
||||
Made by Randy Simons http://randysimons.nl/
|
||||
|
||||
This library provides an easy class for Arduino, to send and receive signals
|
||||
used by some common weather stations using remote 433MHz sensors, like those
|
||||
made by Cresta.
|
||||
E.g. http://www.cresta.nl/index.php?Itemid=2&option=com_zoo&view=item&category_id=32&item_id=281&lang=en
|
||||
|
||||
Cresta is just a brandname. The original OEM seems to be Hideki Electronics.
|
||||
There are other brands which use the same hardware and / or protocol. As far
|
||||
as I know these include Mebus, Irox, Honeywell, Cresta and RST.
|
||||
|
||||
This software is based on the work of Oopsje. See docs/CrestaProtocol.pdf
|
||||
|
||||
See SensorTransmitter.h and SensorReciver.h for details!
|
||||
|
||||
License: GPLv3. See ./RemoteSensor/license.txt
|
||||
|
||||
Latest source and wiki: https://bitbucket.org/fuzzillogic/433mhzforarduino
|
||||
|
||||
|
||||
Installation of library:
|
||||
- Make sure Arduino is closed
|
||||
- Copy the directory RemoteSensor to the Arduino library directory (usually
|
||||
<Sketchbook directory>/libraries/)
|
||||
See http://arduino.cc/en/Guide/Libraries for detailed instructions.
|
||||
|
||||
Default installation sender & demo:
|
||||
- Connect tha data-in-pin of a 433MHz transmitter to digital pin 11. See
|
||||
docs/hardware setup.jpg.
|
||||
(Note: your hardware may have a different pin configuration!)
|
||||
- Start Arduino, and open the example: File -> Examples -> RemoteSensor ->
|
||||
ThermoHygroTransmitter
|
||||
- Alter addresses/devices to reflect your own setup. Otherwise nothing will
|
||||
happen.
|
||||
- Compile, upload and run!
|
||||
|
||||
Default installation receiver & demo:
|
||||
- Connect the data-out-pin of a 433MHz receiver to digital pin 2. See photo.
|
||||
(Note: your hardware may have a different pin configuration!)
|
||||
- Start Arduino, and open the example: File -> Examples -> RemoteSensor ->
|
||||
ThermoHygroReceiver
|
||||
- Compile, upload and run
|
||||
- Open serial monitor in Arduino (115200 baud)
|
||||
- Wait for your 433MHz-sensor to transmit (less than 1 minute), and watch the
|
||||
serial monitor
|
||||
|
||||
|
||||
Changelog:
|
||||
RemoteSensor library v1.0.2 (20130601) for Arduino 1.0
|
||||
- Reduced memory usage (Flash, RAM). Because of this, a small backwards
|
||||
incompatibility is introduced: The last parameter of
|
||||
SensorReceiver::decodeThermoHygro now is a byte instead of short.
|
||||
- Dropped support for Arduino pre-1.0
|
||||
|
||||
RemoteSensor library v1.0.1 (20120213) for Arduino 0022/1.0
|
||||
- Ignore obviously too short or too long signals in SensorReceiver, for better
|
||||
recognition rate.
|
||||
- Support for Arduino 1.0.
|
||||
|
||||
RemoteSensor library v1.0.0 (20110919) for Arduino 0022
|
||||
- Initial version
|
||||
@@ -1,111 +1,111 @@
|
||||
/*
|
||||
* RemoteSensor library v1.0.2 (20130601) for Arduino 1.0
|
||||
*
|
||||
* This library encodes, encrypts en transmits data to
|
||||
* remote weather stations made by Hideki Electronics..
|
||||
*
|
||||
* Copyright 2011-2013 by Randy Simons http://randysimons.nl/
|
||||
*
|
||||
* Parts of this code based on Oopsje's CrestaProtocol.pdf, for which
|
||||
* I thank him very much!
|
||||
*
|
||||
* License: GPLv3. See license.txt
|
||||
*/
|
||||
|
||||
#ifndef SensorTransmitter_h
|
||||
#define SensorTransmitter_h
|
||||
|
||||
#include <Arduino.h>
|
||||
|
||||
/**
|
||||
* SensorTransmitter provides a generic class to simulate Cresta weather sensors, for use
|
||||
* with Cresta weather stations.
|
||||
* E.g. http://www.cresta.nl/index.php?Itemid=2&option=com_zoo&view=item&category_id=32&item_id=281&lang=en
|
||||
*
|
||||
* Cresta is just a brand name. The original OEM seems to be Hideki Electronics. There are
|
||||
* other brands which use the same hardware and / or protocol. As far as I know these include
|
||||
* Mebus, Irox, Honeywell, Cresta and RST.
|
||||
*
|
||||
* Hardware required for this library: a 433MHz/434MHz SAW oscillator transmitter, e.g.
|
||||
* http://www.sparkfun.com/products/10534
|
||||
* http://www.conrad.nl/goto/?product=130428
|
||||
*/
|
||||
class SensorTransmitter {
|
||||
public:
|
||||
/**
|
||||
* Initializes the transmitter. About the random id: "A sensor selects a random value
|
||||
* in the range of column 1 when it is reset. It keeps the same ID until it is reset again."
|
||||
* You can leave it at 0 for most purposes
|
||||
* The transmitter pin is set in OUTPUT mode; you don't have to do this yourself.
|
||||
*
|
||||
* @param transmitterPin Arduino-pin connected to the 433MHz transmitter
|
||||
* @param randomId A "random" value in the range [0..31]
|
||||
*/
|
||||
SensorTransmitter(byte transmitterPin, byte randomId);
|
||||
|
||||
/**
|
||||
* Sends a raw sensor package. Before transmitting, the data is encrypted and checksums are
|
||||
* added. The buffer of the data doesn't need to have room for the checksums, as the data is
|
||||
* copied internally to a new buffer which is always large enough.
|
||||
* However, the data must be valid!
|
||||
*
|
||||
* The data is transmitted 3 times.
|
||||
*
|
||||
* Note that this is a static method.
|
||||
*
|
||||
* @param transmitterPin Arduino-pin connected to the 433MHz transmitter
|
||||
* @param data Pointer to data to transmit
|
||||
*/
|
||||
static void sendPackage(byte transmitterPin, byte *data);
|
||||
|
||||
protected:
|
||||
byte _transmitterPin;
|
||||
byte _randomId;
|
||||
|
||||
private:
|
||||
/**
|
||||
* Sends data as manchester encoded stream
|
||||
*/
|
||||
static void sendManchesterPackage(byte transmitterPin, byte *data, byte cnt);
|
||||
|
||||
/**
|
||||
* Sends a single byte as manchester encoded stream
|
||||
*/
|
||||
static void sendManchesterByte(byte transmitterPin, byte b);
|
||||
|
||||
/**
|
||||
* Encryption and checksum
|
||||
*/
|
||||
static byte encryptAndAddCheck(byte *buffer);
|
||||
static byte secondCheck(byte b);
|
||||
static byte encryptByte(byte b);
|
||||
};
|
||||
|
||||
class ThermoHygroTransmitter : public SensorTransmitter {
|
||||
public:
|
||||
/**
|
||||
* Mimics a Thermo / Hygro sensor. The channel of this device can be 1..5, but note
|
||||
* that only the more expensive receivers can use channels 4 and 5. However, for use
|
||||
* in conjunction with SensorReceiver this is of no concern.
|
||||
*
|
||||
* @param transmitterPin Arduino-pin connected to the 433MHz transmitter
|
||||
* @param randomId A "random" value in the range [0..31]
|
||||
* @channel The channel of this sensor, range [1..5]
|
||||
* @see SensorTransmitter::SensorTransmitter (constructor)
|
||||
*/
|
||||
ThermoHygroTransmitter(byte transmitterPin, byte randomId, byte channel);
|
||||
|
||||
/**
|
||||
* Sends temperature and humidity.
|
||||
*
|
||||
* @param temperature 10x the actual temperature. You want to send 23,5 degrees, then temperature should be 235.
|
||||
* @param humidty Humidity in percentage-points REL. Thus, for 34% REH humidity should be 34.
|
||||
*/
|
||||
void sendTempHumi(int temperature, byte humidity);
|
||||
|
||||
private:
|
||||
byte _channel; // Note: internally, the channels for the thermo/hygro-sensor are mapped as follow:
|
||||
// 1=>1, 2=>2, 3=>3, 4=>5, 5=>6.
|
||||
// This because interally the rain sensor, UV sensor and anemometer are on channel 4.
|
||||
};
|
||||
/*
|
||||
* RemoteSensor library v1.0.2 (20130601) for Arduino 1.0
|
||||
*
|
||||
* This library encodes, encrypts en transmits data to
|
||||
* remote weather stations made by Hideki Electronics..
|
||||
*
|
||||
* Copyright 2011-2013 by Randy Simons http://randysimons.nl/
|
||||
*
|
||||
* Parts of this code based on Oopsje's CrestaProtocol.pdf, for which
|
||||
* I thank him very much!
|
||||
*
|
||||
* License: GPLv3. See license.txt
|
||||
*/
|
||||
|
||||
#ifndef SensorTransmitter_h
|
||||
#define SensorTransmitter_h
|
||||
|
||||
#include <Arduino.h>
|
||||
|
||||
/**
|
||||
* SensorTransmitter provides a generic class to simulate Cresta weather sensors, for use
|
||||
* with Cresta weather stations.
|
||||
* E.g. http://www.cresta.nl/index.php?Itemid=2&option=com_zoo&view=item&category_id=32&item_id=281&lang=en
|
||||
*
|
||||
* Cresta is just a brand name. The original OEM seems to be Hideki Electronics. There are
|
||||
* other brands which use the same hardware and / or protocol. As far as I know these include
|
||||
* Mebus, Irox, Honeywell, Cresta and RST.
|
||||
*
|
||||
* Hardware required for this library: a 433MHz/434MHz SAW oscillator transmitter, e.g.
|
||||
* http://www.sparkfun.com/products/10534
|
||||
* http://www.conrad.nl/goto/?product=130428
|
||||
*/
|
||||
class SensorTransmitter {
|
||||
public:
|
||||
/**
|
||||
* Initializes the transmitter. About the random id: "A sensor selects a random value
|
||||
* in the range of column 1 when it is reset. It keeps the same ID until it is reset again."
|
||||
* You can leave it at 0 for most purposes
|
||||
* The transmitter pin is set in OUTPUT mode; you don't have to do this yourself.
|
||||
*
|
||||
* @param transmitterPin Arduino-pin connected to the 433MHz transmitter
|
||||
* @param randomId A "random" value in the range [0..31]
|
||||
*/
|
||||
SensorTransmitter(byte transmitterPin, byte randomId);
|
||||
|
||||
/**
|
||||
* Sends a raw sensor package. Before transmitting, the data is encrypted and checksums are
|
||||
* added. The buffer of the data doesn't need to have room for the checksums, as the data is
|
||||
* copied internally to a new buffer which is always large enough.
|
||||
* However, the data must be valid!
|
||||
*
|
||||
* The data is transmitted 3 times.
|
||||
*
|
||||
* Note that this is a static method.
|
||||
*
|
||||
* @param transmitterPin Arduino-pin connected to the 433MHz transmitter
|
||||
* @param data Pointer to data to transmit
|
||||
*/
|
||||
static void sendPackage(byte transmitterPin, byte *data);
|
||||
|
||||
protected:
|
||||
byte _transmitterPin;
|
||||
byte _randomId;
|
||||
|
||||
private:
|
||||
/**
|
||||
* Sends data as manchester encoded stream
|
||||
*/
|
||||
static void sendManchesterPackage(byte transmitterPin, byte *data, byte cnt);
|
||||
|
||||
/**
|
||||
* Sends a single byte as manchester encoded stream
|
||||
*/
|
||||
static void sendManchesterByte(byte transmitterPin, byte b);
|
||||
|
||||
/**
|
||||
* Encryption and checksum
|
||||
*/
|
||||
static byte encryptAndAddCheck(byte *buffer);
|
||||
static byte secondCheck(byte b);
|
||||
static byte encryptByte(byte b);
|
||||
};
|
||||
|
||||
class ThermoHygroTransmitter : public SensorTransmitter {
|
||||
public:
|
||||
/**
|
||||
* Mimics a Thermo / Hygro sensor. The channel of this device can be 1..5, but note
|
||||
* that only the more expensive receivers can use channels 4 and 5. However, for use
|
||||
* in conjunction with SensorReceiver this is of no concern.
|
||||
*
|
||||
* @param transmitterPin Arduino-pin connected to the 433MHz transmitter
|
||||
* @param randomId A "random" value in the range [0..31]
|
||||
* @channel The channel of this sensor, range [1..5]
|
||||
* @see SensorTransmitter::SensorTransmitter (constructor)
|
||||
*/
|
||||
ThermoHygroTransmitter(byte transmitterPin, byte randomId, byte channel);
|
||||
|
||||
/**
|
||||
* Sends temperature and humidity.
|
||||
*
|
||||
* @param temperature 10x the actual temperature. You want to send 23,5 degrees, then temperature should be 235.
|
||||
* @param humidty Humidity in percentage-points REL. Thus, for 34% REH humidity should be 34.
|
||||
*/
|
||||
void sendTempHumi(int temperature, byte humidity);
|
||||
|
||||
private:
|
||||
byte _channel; // Note: internally, the channels for the thermo/hygro-sensor are mapped as follow:
|
||||
// 1=>1, 2=>2, 3=>3, 4=>5, 5=>6.
|
||||
// This because interally the rain sensor, UV sensor and anemometer are on channel 4.
|
||||
};
|
||||
#endif
|
||||
@@ -51,4 +51,4 @@ void retransmit(byte *data) {
|
||||
noInterrupts();
|
||||
SensorReceiver::enable();
|
||||
}
|
||||
|
||||
|
||||
|
||||
@@ -25,4 +25,4 @@
|
||||
// Wait two seconds before sending next.
|
||||
delay(2000);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
@@ -1,9 +1,9 @@
|
||||
SensorReceiver KEYWORD1
|
||||
init KEYWORD2
|
||||
decodeThermoHygro KEYWORD2
|
||||
enable KEYWORD2
|
||||
disable KEYWORD2
|
||||
interruptHandler KEYWORD2
|
||||
SensorTransmitter KEYWORD1
|
||||
sendPackage KEYWORD2
|
||||
SensorReceiver KEYWORD1
|
||||
init KEYWORD2
|
||||
decodeThermoHygro KEYWORD2
|
||||
enable KEYWORD2
|
||||
disable KEYWORD2
|
||||
interruptHandler KEYWORD2
|
||||
SensorTransmitter KEYWORD1
|
||||
sendPackage KEYWORD2
|
||||
ThermoHygroTransmitter KEYWORD1
|
||||
Reference in New Issue
Block a user