fixed crlf for project

2014-03-07 21:17:56 +01:00
parent 586a4d6239
commit c1441dca4a
62 changed files with 6964 additions and 6964 deletions
@@ -1,62 +1,62 @@
-RemoteSensor library v1.0.1 (20120213) for Arduino 1.0
-Made by Randy Simons http://randysimons.nl/
-
-This library provides an easy class for Arduino, to send and receive signals
-used by some common weather stations using remote 433MHz sensors, like those
-made by Cresta.
-E.g. http://www.cresta.nl/index.php?Itemid=2&option=com_zoo&view=item&category_id=32&item_id=281&lang=en
-
-Cresta is just a brandname. The original OEM seems to be Hideki Electronics.
-There are other brands which use the same hardware and / or protocol. As far
-as I know these include Mebus, Irox, Honeywell, Cresta and RST.
-
-This software is based on the work of Oopsje. See docs/CrestaProtocol.pdf
-
-See SensorTransmitter.h and SensorReciver.h for details!
-
-License: GPLv3. See ./RemoteSensor/license.txt
-
-Latest source and wiki: https://bitbucket.org/fuzzillogic/433mhzforarduino
-
-
-Installation of library:
- - Make sure Arduino is closed
- - Copy the directory RemoteSensor to the Arduino library directory (usually
-   <Sketchbook directory>/libraries/)
-   See http://arduino.cc/en/Guide/Libraries for detailed instructions.
- 
-Default installation sender & demo:
- - Connect tha data-in-pin of a 433MHz transmitter to digital pin 11. See 
-   docs/hardware setup.jpg.
-   (Note: your hardware may have a different pin configuration!)
- - Start Arduino, and open the example: File -> Examples -> RemoteSensor ->
-   ThermoHygroTransmitter
- - Alter addresses/devices to reflect your own setup. Otherwise nothing will
-   happen.
- - Compile, upload and run!
-
-Default installation receiver & demo:
- - Connect the data-out-pin of a 433MHz receiver to digital pin 2. See photo.
-  (Note: your hardware may have a different pin configuration!)
- - Start Arduino, and open the example: File -> Examples -> RemoteSensor ->
-   ThermoHygroReceiver
- - Compile, upload and run
- - Open serial monitor in Arduino (115200 baud)
- - Wait for your 433MHz-sensor to transmit (less than 1 minute), and watch the
-   serial monitor
-
-
-Changelog:
-RemoteSensor library v1.0.2 (20130601) for Arduino 1.0
- - Reduced memory usage (Flash, RAM). Because of this, a small backwards
-   incompatibility is introduced: The last parameter of
-   SensorReceiver::decodeThermoHygro now is a byte instead of short.
- - Dropped support for Arduino pre-1.0
-
-RemoteSensor library v1.0.1 (20120213) for Arduino 0022/1.0
- - Ignore obviously too short or too long signals in SensorReceiver, for better
-   recognition rate.
- - Support for Arduino 1.0.
-
-RemoteSensor library v1.0.0 (20110919) for Arduino 0022
+RemoteSensor library v1.0.1 (20120213) for Arduino 1.0
+Made by Randy Simons http://randysimons.nl/
+
+This library provides an easy class for Arduino, to send and receive signals
+used by some common weather stations using remote 433MHz sensors, like those
+made by Cresta.
+E.g. http://www.cresta.nl/index.php?Itemid=2&option=com_zoo&view=item&category_id=32&item_id=281&lang=en
+
+Cresta is just a brandname. The original OEM seems to be Hideki Electronics.
+There are other brands which use the same hardware and / or protocol. As far
+as I know these include Mebus, Irox, Honeywell, Cresta and RST.
+
+This software is based on the work of Oopsje. See docs/CrestaProtocol.pdf
+
+See SensorTransmitter.h and SensorReciver.h for details!
+
+License: GPLv3. See ./RemoteSensor/license.txt
+
+Latest source and wiki: https://bitbucket.org/fuzzillogic/433mhzforarduino
+
+
+Installation of library:
+ - Make sure Arduino is closed
+ - Copy the directory RemoteSensor to the Arduino library directory (usually
+   <Sketchbook directory>/libraries/)
+   See http://arduino.cc/en/Guide/Libraries for detailed instructions.
+ 
+Default installation sender & demo:
+ - Connect tha data-in-pin of a 433MHz transmitter to digital pin 11. See 
+   docs/hardware setup.jpg.
+   (Note: your hardware may have a different pin configuration!)
+ - Start Arduino, and open the example: File -> Examples -> RemoteSensor ->
+   ThermoHygroTransmitter
+ - Alter addresses/devices to reflect your own setup. Otherwise nothing will
+   happen.
+ - Compile, upload and run!
+
+Default installation receiver & demo:
+ - Connect the data-out-pin of a 433MHz receiver to digital pin 2. See photo.
+  (Note: your hardware may have a different pin configuration!)
+ - Start Arduino, and open the example: File -> Examples -> RemoteSensor ->
+   ThermoHygroReceiver
+ - Compile, upload and run
+ - Open serial monitor in Arduino (115200 baud)
+ - Wait for your 433MHz-sensor to transmit (less than 1 minute), and watch the
+   serial monitor
+
+
+Changelog:
+RemoteSensor library v1.0.2 (20130601) for Arduino 1.0
+ - Reduced memory usage (Flash, RAM). Because of this, a small backwards
+   incompatibility is introduced: The last parameter of
+   SensorReceiver::decodeThermoHygro now is a byte instead of short.
+ - Dropped support for Arduino pre-1.0
+
+RemoteSensor library v1.0.1 (20120213) for Arduino 0022/1.0
+ - Ignore obviously too short or too long signals in SensorReceiver, for better
+   recognition rate.
+ - Support for Arduino 1.0.
+
+RemoteSensor library v1.0.0 (20110919) for Arduino 0022
 - Initial version