HeatpumpIR library + sensors example to send IR commands to heatpumps

2015-09-29 20:21:42 +03:00
parent 1b8c87704c
commit c9ffef8da3
42 changed files with 4004 additions and 0 deletions
@@ -0,0 +1,73 @@
+/*
+    Hisense AQV12PSBN / AQV09ASA heatpump control (remote control P/N zzz)
+*/
+#ifndef HisenseHeatpumpIR_h
+#define HisenseHeatpumpIR_h
+
+#include <HeatpumpIR.h>
+
+
+// Hisense timing constants
+#define HISENSE_AIRCON1_HDR_MARK   9060
+#define HISENSE_AIRCON1_HDR_SPACE  4550
+#define HISENSE_AIRCON1_BIT_MARK   520
+#define HISENSE_AIRCON1_ONE_SPACE  1700
+#define HISENSE_AIRCON1_ZERO_SPACE 630
+#define HISENSE_AIRCON1_MSG_SPACE  8140
+
+// Power state
+#define HISENSE_AIRCON1_POWER_OFF   0x04	//**
+#define HISENSE_AIRCON1_POWER_ON    0x00	//**
+
+// Operating modes
+// Hisense codes
+#define HISENSE_AIRCON1_MODE_AUTO  0x04 // Not available 0x00
+#define HISENSE_AIRCON1_MODE_HEAT  0x00
+#define HISENSE_AIRCON1_MODE_COOL  0x02
+#define HISENSE_AIRCON1_MODE_DRY   0x03
+#define HISENSE_AIRCON1_MODE_FAN   0x04
+#define HISENSE_AIRCON1_MODE_MAINT 0x04 // Power OFF
+
+// Fan speeds. Note that some heatpumps have less than 5 fan speeds
+
+#define HISENSE_AIRCON1_FAN_AUTO   0x00 // Fan speed
+#define HISENSE_AIRCON1_FAN1       0x03 // * low
+#define HISENSE_AIRCON1_FAN2       0x02 // * med
+#define HISENSE_AIRCON1_FAN3       0x01 // * high
+#define HISENSE_AIRCON1_FAN4       0x01 // * high Not available
+#define HISENSE_AIRCON1_FAN5       0x01 // * high Not available
+
+// Not available in this model.
+// Vertical air directions. Note that these cannot be set on all heat pumps
+#define HISENSE_VDIR_AUTO   0
+#define HISENSE_VDIR_MANUAL 0
+#define HISENSE_VDIR_SWING  0
+#define HISENSE_VDIR_UP     0
+#define HISENSE_VDIR_MUP    0
+#define HISENSE_VDIR_MIDDLE 0
+#define HISENSE_VDIR_MDOWN  0
+#define HISENSE_VDIR_DOWN   0
+
+// Not available in this model.
+// Horizontal air directions. Note that these cannot be set on all heat pumps
+#define HISENSE_HDIR_AUTO   0
+#define HISENSE_HDIR_MANUAL 0
+#define HISENSE_HDIR_SWING  0
+#define HISENSE_HDIR_MIDDLE 0
+#define HISENSE_HDIR_LEFT   0
+#define HISENSE_HDIR_MLEFT  0
+#define HISENSE_HDIR_MRIGHT 0
+#define HISENSE_HDIR_RIGHT  0
+
+
+class HisenseHeatpumpIR : public HeatpumpIR
+{
+  public:
+    HisenseHeatpumpIR();
+    void send(IRSender& IR, byte powerModeCmd, byte operatingModeCmd, byte fanSpeedCmd, byte temperatureCmd, byte swingVCmd, byte swingHCmd);
+
+  private:
+    void sendHisense(IRSender& IR, byte powerMode, byte operatingMode, byte fanSpeed, byte temperature, byte swingV, byte swingH);
+};
+
+#endif