Update file headers.

2015-04-08 21:14:52 +02:00
parent d2dacd8670
commit caaadf44cf
67 changed files with 1795 additions and 401 deletions
@@ -1,3 +1,23 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */
 #ifndef MyConfig_h
 #define MyConfig_h
 #include <stdint.h>
@@ -1,3 +1,22 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */
 #include "MyHw.h"
 MyHw::MyHw() {
@@ -1,3 +1,22 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */
 #ifndef MyHw_h
 #define MyHw_h
@@ -1,3 +1,22 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */
 #include "MyHw.h"
 #include "MyHwATMega328.h"
@@ -1,3 +1,22 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */
 #ifndef MyHwATMega328_h
 #define MyHwATMega328_h
@@ -1,3 +1,23 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */
 #include "MyMessage.h"
 #include <stdio.h>
 #include <stdlib.h>
@@ -1,14 +1,23 @@
-/*
+/**
- The MySensors library adds a new layer on top of the RF24 library.
+ * The MySensors Arduino library handles the wireless radio link and protocol
- It handles radio network routing, relaying and ids.
+ * between your home built sensors/actuators and HA controller of choice.
-
+ * The sensors forms a self healing radio network with optional repeaters. Each
- Created by Henrik Ekblad <henrik.ekblad@gmail.com>
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
-
+ * network topology allowing messages to be routed to nodes.
- This program is free software; you can redistribute it and/or
+ *
- modify it under the terms of the GNU General Public License
+ * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
- version 2 as published by the Free Software Foundation.
+ * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */
 #ifndef MyMessage_h
 #define MyMessage_h
@@ -1,3 +1,22 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */
 #include "MyParser.h"
 MyParser::MyParser() {
@@ -1,3 +1,22 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */
 #ifndef MyParser_h
 #define MyParser_h
@@ -1,3 +1,22 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */
 #include "MyParser.h"
 #include "MyParserSerial.h"
 #include "MyTransport.h"
@@ -1,3 +1,22 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */
 #ifndef MyParserSerial_h
 #define MyParserSerial_h
@@ -1,14 +1,23 @@
- /*
+/**
- The MySensors library adds a new layer on top of the RF24 library.
+ * The MySensors Arduino library handles the wireless radio link and protocol
- It handles radio network routing, relaying and ids.
+ * between your home built sensors/actuators and HA controller of choice.
-
+ * The sensors forms a self healing radio network with optional repeaters. Each
- Created by Henrik Ekblad <henrik.ekblad@gmail.com>
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
-
+ * network topology allowing messages to be routed to nodes.
- This program is free software; you can redistribute it and/or
+ *
- modify it under the terms of the GNU General Public License
+ * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
- version 2 as published by the Free Software Foundation.
+ * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */
 #include "MySensor.h"
 #define DISTANCE_INVALID (0xFF)
@@ -101,9 +110,9 @@ void MySensor::begin(void (*_msgCallback)(const MyMessage &), uint8_t _nodeId, b
 	if (isGateway) {
 		// Set configuration for gateway
-		nc.parentNodeId = 0;
+		nc.parentNodeId = GATEWAY_ADDRESS;
 		nc.distance = 0;
-		nc.nodeId = 0;
+		nc.nodeId = GATEWAY_ADDRESS;
 	} else {
 		// Read settings from eeprom
 		hw_readConfigBlock((void*)&nc, (void*)EEPROM_NODE_ID_ADDRESS, sizeof(NodeConfig));
@@ -1,14 +1,23 @@
-/*
+/**
- The MySensors library adds a new layer on top of the RF24 library.
+ * The MySensors Arduino library handles the wireless radio link and protocol
- It handles radio network routing, relaying and ids.
+ * between your home built sensors/actuators and HA controller of choice.
-
+ * The sensors forms a self healing radio network with optional repeaters. Each
- Created by Henrik Ekblad <henrik.ekblad@gmail.com>
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
-	
+ * network topology allowing messages to be routed to nodes.
- This program is free software; you can redistribute it and/or
+ *
- modify it under the terms of the GNU General Public License
+ * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
- version 2 as published by the Free Software Foundation.
+ * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */
 #ifndef MySensor_h
 #define MySensor_h
@@ -1,3 +1,22 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */
 #include "MySigning.h"
 MySigning::MySigning(bool requestSignatures) : _requestSignatures(requestSignatures) {
@@ -1,8 +1,28 @@
-/*
+/**
- The MySigning driver provides a generic API for various signing backends to offer
+ * The MySensors Arduino library handles the wireless radio link and protocol
- signing of MySensors messages.
+ * between your home built sensors/actuators and HA controller of choice.
- 
+ * The sensors forms a self healing radio network with optional repeaters. Each
- Created by Patrick "Anticimex" Fallberg <patrick@fallberg.net>
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * DESCRIPTION
 * Signing support created by Patrick "Anticimex" Fallberg <patrick@fallberg.net>
 * The MySigning driver provides a generic API for various signing backends to offer
 * signing of MySensors messages.
 *
 */
 #ifndef MySigning_h
 #define MySigning_h
@@ -1,9 +1,30 @@
-/*
+/**
- ATSHA204 signing backend. The Atmel ATSHA204 offers true random number generation and
+ * The MySensors Arduino library handles the wireless radio link and protocol
- HMAC-SHA256 authentication with a readout-protected key.
+ * between your home built sensors/actuators and HA controller of choice.
- 
+ * The sensors forms a self healing radio network with optional repeaters. Each
- Created by Patrick "Anticimex" Fallberg <patrick@fallberg.net>
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * DESCRIPTION
 * Signing support created by Patrick "Anticimex" Fallberg <patrick@fallberg.net>
 * ATSHA204 signing backend. The Atmel ATSHA204 offers true random number generation and
 * HMAC-SHA256 authentication with a readout-protected key.
 *
 */
 #include "MySigning.h"
 #include "MySigningAtsha204.h"
@@ -1,9 +1,30 @@
-/*
+/**
- ATSHA204 signing backend. The Atmel ATSHA204 offers true random number generation and
+ * The MySensors Arduino library handles the wireless radio link and protocol
- HMAC-SHA256 authentication with a readout-protected key.
+ * between your home built sensors/actuators and HA controller of choice.
- 
+ * The sensors forms a self healing radio network with optional repeaters. Each
- Created by Patrick "Anticimex" Fallberg <patrick@fallberg.net>
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * DESCRIPTION
 * Signing support created by Patrick "Anticimex" Fallberg <patrick@fallberg.net>
 * ATSHA204 signing backend. The Atmel ATSHA204 offers true random number generation and
 * HMAC-SHA256 authentication with a readout-protected key.
 *
 */
 #ifndef MySigningAtsha204_h
 #define MySigningAtsha204_h
@@ -1,12 +1,33 @@
-/*
+/**
- ATSHA204 emulated signing backend. The emulated ATSHA204 implementation offers pseudo random
+ * The MySensors Arduino library handles the wireless radio link and protocol
- number generation and HMAC-SHA256 authentication compatible with a "physical" ATSHA204.
+ * between your home built sensors/actuators and HA controller of choice.
- NOTE: Key is stored in clear text in the Arduino firmware. Therefore, the use of this back-end
+ * The sensors forms a self healing radio network with optional repeaters. Each
- could compromise the key used in the signed message infrastructure if device is lost and its memory
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
- dumped.
+ * network topology allowing messages to be routed to nodes.
- 
+ *
- Created by Patrick "Anticimex" Fallberg <patrick@fallberg.net>
+ * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * DESCRIPTION
 * Signing support created by Patrick "Anticimex" Fallberg <patrick@fallberg.net>
 * ATSHA204 emulated signing backend. The emulated ATSHA204 implementation offers pseudo random
 * number generation and HMAC-SHA256 authentication compatible with a "physical" ATSHA204.
 * NOTE: Key is stored in clear text in the Arduino firmware. Therefore, the use of this back-end
 * could compromise the key used in the signed message infrastructure if device is lost and its memory
 * dumped.
 *
 */
 #include "MyConfig.h"
 #include "MySigning.h"
 #include "MySigningAtsha204Soft.h"
@@ -1,12 +1,33 @@
-/*
+/**
- ATSHA204 emulated signing backend. The emulated ATSHA204 implementation offers pseudo random
+ * The MySensors Arduino library handles the wireless radio link and protocol
- number generation and HMAC-SHA256 authentication compatible with a "physical" ATSHA204.
+ * between your home built sensors/actuators and HA controller of choice.
- NOTE: Key is stored in clear text in the Arduino firmware. Therefore, the use of this back-end
+ * The sensors forms a self healing radio network with optional repeaters. Each
- could compromise the key used in the signed message infrastructure if device is lost and its memory
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
- dumped.
+ * network topology allowing messages to be routed to nodes.
- 
+ *
- Created by Patrick "Anticimex" Fallberg <patrick@fallberg.net>
+ * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * DESCRIPTION
 * Signing support created by Patrick "Anticimex" Fallberg <patrick@fallberg.net>
 * ATSHA204 emulated signing backend. The emulated ATSHA204 implementation offers pseudo random
 * number generation and HMAC-SHA256 authentication compatible with a "physical" ATSHA204.
 * NOTE: Key is stored in clear text in the Arduino firmware. Therefore, the use of this back-end
 * could compromise the key used in the signed message infrastructure if device is lost and its memory
 * dumped.
 *
 */
 #ifndef MySigningHmac256Soft_h
 #define MySigningHmac256Soft_h
@@ -1,8 +1,30 @@
-/*
+/**
- Disabled signing backend. Does not provide any security measures.
+ * The MySensors Arduino library handles the wireless radio link and protocol
- 
+ * between your home built sensors/actuators and HA controller of choice.
- Created by Patrick "Anticimex" Fallberg <patrick@fallberg.net>
+ * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * DESCRIPTION
 * Signing support created by Patrick "Anticimex" Fallberg <patrick@fallberg.net>
 * Disabled signing backend. Does not provide any security measures.
 *
 */
 #include "MyConfig.h"
 #include "MySigning.h"
 #include "MySigningNone.h"
@@ -1,8 +1,30 @@
-/*
+/**
- Disabled signing backend. Does not provide any security measures.
+ * The MySensors Arduino library handles the wireless radio link and protocol
- 
+ * between your home built sensors/actuators and HA controller of choice.
- Created by Patrick "Anticimex" Fallberg <patrick@fallberg.net>
+ * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * DESCRIPTION
 * Signing support created by Patrick "Anticimex" Fallberg <patrick@fallberg.net>
 * Disabled signing backend. Does not provide any security measures.
 *
 */
 #ifndef MySigningNone_h
 #define MySigningNone_h
@@ -1,3 +1,22 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */
 #include "MyTransport.h"
 MyTransport::MyTransport() {
@@ -1,3 +1,22 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */
 #ifndef MyTransport_h
 #define MyTransport_h
@@ -1,3 +1,22 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */
 #include "MyTransport.h"
 #include "MyTransportNRF24.h"
@@ -1,3 +1,22 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */
 #ifndef MyTransportNRF24_h
 #define MyTransportNRF24_h
@@ -1,3 +1,22 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */
 #include "MyTransport.h"
 #include "MyTransportRFM69.h"
@@ -1,3 +1,22 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */
 #ifndef MyTransportRF69_h
 #define MyTransportRF69_h
@@ -1,11 +1,11 @@
 /***
 *  This file defines the Sensor library version number 
 *  Normally, contributors should not modify this directly
- *  as it is manaaged by the MySensors Bot.
+ *  as it is managed by the MySensors Bot.
 */
 #ifndef Version_h
 #define Version_h
-#define LIBRARY_VERSION "1.4.1"
+#define LIBRARY_VERSION "1.5 b1"
 #endif
@@ -1,19 +1,37 @@
-/*
+/**
-  Vera Arduino MQ2
+ * The MySensors Arduino library handles the wireless radio link and protocol
-
+ * between your home built sensors/actuators and HA controller of choice.
-  connect the MQ2 sensor as follows :
+ * The sensors forms a self healing radio network with optional repeaters. Each
-
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
-  A H A   >>> 5V
+ * network topology allowing messages to be routed to nodes.
-  B		  >>> A0
+ *
-  H       >>> GND
+ * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
-  B       >>> 10K ohm >>> GND
+ * Copyright (C) 2013-2015 Sensnology AB
-  
+ * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
-  Contribution: epierre
+ *
-  Based on http://sandboxelectronics.com/?p=165
+ * Documentation: http://www.mysensors.org
-  
+ * Support Forum: http://forum.mysensors.org
-  License: Attribution-NonCommercial-ShareAlike 3.0 Unported (CC BY-NC-SA 3.0)
+ *
- 
+ * This program is free software; you can redistribute it and/or
-  Modified by HEK to work in 1.4
+ * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * DESCRIPTION
 *
 * Connect the MQ2 sensor as follows :
 * 
 *   A H A   >>> 5V
 *   B       >>> A0
 *   H       >>> GND
 *   B       >>> 10K ohm >>> GND
 * 
 * Contribution: epierre
 * Based on http://sandboxelectronics.com/?p=165
 * License: Attribution-NonCommercial-ShareAlike 3.0 Unported (CC BY-NC-SA 3.0)
 * Modified by HEK to work in 1.4
 * 
 */
 #include <SPI.h>
@@ -1,6 +1,31 @@
-// This is an example that demonstrates how to report the battery level for a sensor
+/**
-// Instructions for measuring battery capacity on A0 are available in the follwoing forum
+ * The MySensors Arduino library handles the wireless radio link and protocol
-// thread: http://forum.micasaverde.com/index.php/topic,20078.0.html
+ * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * DESCRIPTION
 *
 * This is an example that demonstrates how to report the battery level for a sensor
 * Instructions for measuring battery capacity on A0 are available here:
 * http://www.mysensors.org/build/battery
 * 
 */
 #include <SPI.h>
 #include <MySensor.h>
@@ -1,6 +1,31 @@
-// Simple binary switch example 
+/**
-// Connect button or door/window reed switch between 
+ * The MySensors Arduino library handles the wireless radio link and protocol
-// digitial I/O pin 3 (BUTTON_PIN below) and GND.
+ * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * DESCRIPTION
 *
 * Simple binary switch example 
 * Connect button or door/window reed switch between 
 * digitial I/O pin 3 (BUTTON_PIN below) and GND.
 * http://www.mysensors.org/build/binary
 */
 #include <MySensor.h>
 #include <SPI.h>
@@ -1,9 +1,34 @@
-// Interrupt driven binary switch example with dual interrupts
+/**
-// Author: Patrick 'Anticimex' Fallberg
+ * The MySensors Arduino library handles the wireless radio link and protocol
-// Connect one button or door/window reed switch between 
+ * between your home built sensors/actuators and HA controller of choice.
-// digitial I/O pin 3 (BUTTON_PIN below) and GND and the other
+ * The sensors forms a self healing radio network with optional repeaters. Each
-// one in similar fashion on digital I/O pin 2.
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
-// This example is designed to fit Arduino Nano/Pro Mini
+ * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * DESCRIPTION
 *
 * Interrupt driven binary switch example with dual interrupts
 * Author: Patrick 'Anticimex' Fallberg
 * Connect one button or door/window reed switch between 
 * digitial I/O pin 3 (BUTTON_PIN below) and GND and the other
 * one in similar fashion on digital I/O pin 2.
 * This example is designed to fit Arduino Nano/Pro Mini
 * 
 */
 #include <MySensor.h>
 #include <SPI.h>
@@ -1,6 +1,26 @@
-/*
+/**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
-* This sketch clears radioId, relayId and routing info in EEPROM 
+ * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * DESCRIPTION
 *
 * This sketch clears radioId, relayId and other routing information in EEPROM back to factory default
 * 
 */
@@ -1,4 +1,29 @@
-// Example sketch showing how to send in OneWire temperature readings
+/**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * DESCRIPTION
 *
 * Example sketch showing how to send in DS1820B OneWire temperature readings back to the controller
 * http://www.mysensors.org/build/temp
 */
 #include <MySensor.h>  
 #include <SPI.h>
 #include <DallasTemperature.h>
@@ -1,8 +1,27 @@
-/***
+/**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - February 15, 2014 - Bruce Lacey
 * Version 1.1 - August 13, 2014 - Converted to 1.4 (hek) 
 *
 * DESCRIPTION
 * This sketch provides a Dimmable LED Light using PWM and based Henrik Ekblad 
 * <henrik.ekblad@gmail.com> Vera Arduino Sensor project.  
@@ -13,12 +32,9 @@
 * to the LED negative terminal and the MOSFET Source pin is connected to ground.  
 *
 * This sketch is extensible to support more than one MOSFET/PWM dimmer per circuit.
- *
+ * http://www.mysensors.org/build/dimmer
- * REVISION HISTORY
+ */
- * Version 1.0 - February 15, 2014 - Bruce Lacey
+
 * Version 1.1 - August 13, 2014 - Converted to 1.4 (hek) 
 *
 ***/
 #define SN "DimmableLED"
 #define SV "1.1"
@@ -1,20 +1,33 @@
-/***
+/**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - January 30, 2015 - Developed by GizMoCuz (Domoticz)
 * 
 * DESCRIPTION
 * This sketch provides an example how to implement a Dimmable Light 
 * It is pure virtual and it logs messages to the serial output
 * It can be used as a base sketch for actual hardware.
 * Stores the last light state and level in eeprom.
 * 
- * Developed by GizMoCuz (Domoticz)
+ */
 *
 * REVISION HISTORY
 * Version 1.0 - January 30, 2015
 *
 ***/
 #include <SPI.h>
 #include <MySensor.h>  
@@ -1,3 +1,31 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Henrik EKblad
 * 
 * DESCRIPTION
 * This sketch provides an example how to implement a distance sensor using HC-SR04 
 * http://www.mysensors.org/build/distance
 */
 #include <SPI.h>
 #include <MySensor.h>  
 #include <NewPing.h>
@@ -1,20 +1,41 @@
-/*
+/**
-  Arduino Dust Sensort
+ * The MySensors Arduino library handles the wireless radio link and protocol
-
+ * between your home built sensors/actuators and HA controller of choice.
-  connect the sensor as follows :
+ * The sensors forms a self healing radio network with optional repeaters. Each
-
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
-  VCC       >>> 5V
+ * network topology allowing messages to be routed to nodes.
-  A         >>> A0
+ *
-  GND       >>> GND
+ * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
-
+ * Copyright (C) 2013-2015 Sensnology AB
-  Based on: http://www.dfrobot.com/wiki/index.php/Sharp_GP2Y1010AU 
+ * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
-  Authors: Cyrille Médard de Chardon (serialC), Christophe Trefois (Trefex)
+ *
-  Contribution: epierre
+ * Documentation: http://www.mysensors.org
-  COnverted to 1.4 by Henrik Ekblad
+ * Support Forum: http://forum.mysensors.org
-  
+ *
-  The dust sensor used (see purchase guide for latest link):
+ * This program is free software; you can redistribute it and/or
-  http://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=2&pub=5575069610&toolid=10001&campid=5337433187&customid=&icep_item=171259125886&ipn=psmain&icep_vectorid=229466&kwid=902099&mtid=824&kw=lg
+ * modify it under the terms of the GNU General Public License
-  
+ * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - epierre
 * Converted to 1.4 by Henrik Ekblad
 * 
 * DESCRIPTION
 * Arduino Dust Sensort
 *
 * connect the sensor as follows :
 * 
 *   VCC       >>> 5V
 *   A         >>> A0
 *   GND       >>> GND
 *
 * Based on: http://www.dfrobot.com/wiki/index.php/Sharp_GP2Y1010AU 
 * Authors: Cyrille Médard de Chardon (serialC), Christophe Trefois (Trefex)
 * 
 * http://www.mysensors.org/build/dust
 * 
 */
 #include <MySensor.h>  
@@ -1,11 +1,38 @@
-// Use this sensor to measure KWH and Watt of your house meeter
+/**
-// You need to set the correct pulsefactor of your meeter (blinks per KWH).
+ * The MySensors Arduino library handles the wireless radio link and protocol
-// The sensor starts by fetching current KWH value from gateway.
+ * between your home built sensors/actuators and HA controller of choice.
-// Reports both KWH and Watt back to gateway.
+ * The sensors forms a self healing radio network with optional repeaters. Each
-//
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
-// Unfortunately millis() won't increment when the Arduino is in 
+ * network topology allowing messages to be routed to nodes.
-// sleepmode. So we cannot make this sensor sleep if we also want 
+ *
-// to calculate/report watt-number.
+ * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Henrik EKblad
 * 
 * DESCRIPTION
 * This sketch provides an example how to implement a distance sensor using HC-SR04 
 * Use this sensor to measure KWH and Watt of your house meeter
 * You need to set the correct pulsefactor of your meeter (blinks per KWH).
 * The sensor starts by fetching current KWH value from gateway.
 * Reports both KWH and Watt back to gateway.
 *
 * Unfortunately millis() won't increment when the Arduino is in 
 * sleepmode. So we cannot make this sensor sleep if we also want 
 * to calculate/report watt-number.
 * http://www.mysensors.org/build/pulse_power
 */
 #include <SPI.h>
 #include <MySensor.h>  
@@ -1,14 +1,29 @@
-
+/**
-/*
+ * The MySensors Arduino library handles the wireless radio link and protocol
- * Copyright (C) 2013 Henrik Ekblad <henrik.ekblad@gmail.com>
+ * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
- * Contribution by a-lurker and Anticimex, 
+ * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
- * Contribution by Norbert Truchsess <norbert.truchsess@t-online.de>
+ * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Henrik EKblad
 * Contribution by a-lurker and Anticimex, 
 * Contribution by Norbert Truchsess <norbert.truchsess@t-online.de>
 *
 * 
 * DESCRIPTION
 * The EthernetGateway sends data received from sensors to the ethernet link. 
 * The gateway also accepts input on ethernet interface, which is then sent out to the radio network.
@@ -133,7 +133,7 @@ void parseAndSend(MySensor gw, char *commandBuffer) {
 }
 void setInclusionMode(boolean newMode) {
-  if (newMode != inclusionMode)
+  if (newMode != inclusionMode) {
    inclusionMode = newMode;
    // Send back mode change on serial line to ack command
    serial(PSTR("0;0;%d;0;%d;%d\n"), C_INTERNAL, I_INCLUSION_MODE, inclusionMode?1:0);
@@ -142,6 +142,7 @@ void setInclusionMode(boolean newMode) {
      inclusionStartTime = millis();
    }
  }
 }
@@ -1,3 +1,32 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Henrik EKblad
 * 
 * DESCRIPTION
 * This sketch provides an example how to implement a humidity/temperature
 * sensor using DHT11/DHT-22 
 * http://www.mysensors.org/build/humidity
 */
 #include <SPI.h>
 #include <MySensor.h>  
 #include <DHT.h>  
@@ -1,9 +1,35 @@
-// Example sketch showing how to control ir devices
+/**
-// An IR LED must be connected to Arduino PWM pin 3.
+ * The MySensors Arduino library handles the wireless radio link and protocol
-// An optional ir receiver can be connected to PWM pin 8. 
+ * between your home built sensors/actuators and HA controller of choice.
-// All receied ir signals will be sent to gateway device stored in VAR_1.
+ * The sensors forms a self healing radio network with optional repeaters. Each
-// When binary light on is clicked - sketch will send volume up ir command
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
-// When binary light off is clicked - sketch will send volume down ir command
+ * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Henrik EKblad
 * 
 * DESCRIPTION
 * Example sketch showing how to control ir devices
 * An IR LED must be connected to Arduino PWM pin 3.
 * An optional ir receiver can be connected to PWM pin 8. 
 * All receied ir signals will be sent to gateway device stored in VAR_1.
 * When binary light on is clicked - sketch will send volume up ir command
 * When binary light off is clicked - sketch will send volume down ir command
 * http://www.mysensors.org/build/ir
 */
 #include <MySensor.h>
 #include <SPI.h>
@@ -1,19 +1,40 @@
-/*
+/**
-  Vera Arduino BH1750FVI Light sensor
+ * The MySensors Arduino library handles the wireless radio link and protocol
-  communicate using I2C Protocol
+ * between your home built sensors/actuators and HA controller of choice.
-  this library enable 2 slave device addresses
+ * The sensors forms a self healing radio network with optional repeaters. Each
-  Main address  0x23
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
-  secondary address 0x5C
+ * network topology allowing messages to be routed to nodes.
-  connect the sensor as follows :
+ *
-
+ * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
-  VCC  >>> 5V
+ * Copyright (C) 2013-2015 Sensnology AB
-  Gnd  >>> Gnd
+ * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
-  ADDR >>> NC or GND  
+ *
-  SCL  >>> A5
+ * Documentation: http://www.mysensors.org
-  SDA  >>> A4
+ * Support Forum: http://forum.mysensors.org
-  
+ *
-  Contribution: idefix
+ * This program is free software; you can redistribute it and/or
- 
+ * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - idefix
 * 
 * DESCRIPTION
 * Arduino BH1750FVI Light sensor
 * communicate using I2C Protocol
 * this library enable 2 slave device addresses
 * Main address  0x23
 * secondary address 0x5C
 * connect the sensor as follows :
 *
 *   VCC  >>> 5V
 *   Gnd  >>> Gnd
 *   ADDR >>> NC or GND  
 *   SCL  >>> A5
 *   SDA  >>> A4
 * http://www.mysensors.org/build/light
 */
 #include <SPI.h>
@@ -1,3 +1,31 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Henrik EKblad
 * 
 * DESCRIPTION
 * Example sketch showing how to measue light level using a LM393 photo-resistor 
 * http://www.mysensors.org/build/light
 */
 #include <SPI.h>
 #include <MySensor.h>  
@@ -1,14 +1,39 @@
-// MAX6875 Hight temperature sensor with range: -200 degC - +1300 degC 
+/**
-// Contribution by MrLynx
+ * The MySensors Arduino library handles the wireless radio link and protocol
-// http://forum.mysensors.org/topic/641/max6675
+ * between your home built sensors/actuators and HA controller of choice.
-//
+ * The sensors forms a self healing radio network with optional repeaters. Each
-// Connect:
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
-// MAX6675 - Arduino
+ * network topology allowing messages to be routed to nodes.
-//     CS0 - 4
+ *
-//      SO - 3 
+ * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
-//    SCLK - 5
+ * Copyright (C) 2013-2015 Sensnology AB
-//     VCC - 5V
+ * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
-//     GND - GND
+ *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - MrLynx
 * 
 * DESCRIPTION
 * MAX6875 High temperature sensor with range: -200 degC - +1300 degC 
 * http://forum.mysensors.org/topic/641/max6675
 *
 * Connect MAX6675 - Arduino
 *     CS0 - 4
 *      SO - 3 
 *    SCLK - 5
 *     VCC - 5V
 *     GND - GND
 *
 */
 #include <MySensor.h>
 #include <MAX6675.h>
@@ -1,59 +1,77 @@
-/* 				MyMQTT Broker Gateway 0.1b
+/**
-
+ * The MySensors Arduino library handles the wireless radio link and protocol
-Created by Daniel Wiegert <daniel.wiegert@gmail.com>
+ * between your home built sensors/actuators and HA controller of choice.
-Based on MySensors Ethernet Gateway by Henrik Ekblad <henrik.ekblad@gmail.com>
+ * The sensors forms a self healing radio network with optional repeaters. Each
-http://www.mysensors.org
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
-
+ * network topology allowing messages to be routed to nodes.
-Requires MySensors lib 1.4b
+ *
-
+ * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Created by Daniel Wiegert <daniel.wiegert@gmail.com>
 * 
 * DESCRIPTION
 * MyMQTT Broker Gateway 0.1b
 * Latest instructions found here:
 * http://www.mysensors.org/build/mqtt_gateway
 * http://www.mysensors.org/build/ethernet_gateway
 * 
 * Change below; TCP_IP, TCP_PORT, TCP_MAC
-This will listen on your selected TCP_IP:TCP_PORT below, Please change TCP_MAC your liking also.
+ * This will listen on your selected TCP_IP:TCP_PORT below, Please change TCP_MAC your liking also.
 * 1 -> NOTE: Keep first byte at x2, x6, xA or xE (replace x with any hex value) for using Local Ranges.
 * 2 You can use standard pin set-up as MySensors recommends or if you own a IBOARD you may change
-	the radio-pins below if you hardware mod your iBoard. see [URL BELOW] for more details.
+ *	the radio-pins below if you hardware mod your iBoard. see [URL BELOW] for more details.
-	http://forum.mysensors.org/topic/224/iboard-cheap-single-board-ethernet-arduino-with-radio/5
+ *	http://forum.mysensors.org/topic/224/iboard-cheap-single-board-ethernet-arduino-with-radio/5
-
+ *
-* Don't forget to look at the definitions in libraries\MySensors\MyMQTT.h!
+ * Don't forget to look at the definitions in MyMQTT.h!
-
+ *
-	define TCPDUMP and connect serial interface if you have problems, please write on
+ *	define TCPDUMP and connect serial interface if you have problems, please write on
-	http://forum.mysensors.org/ and explain your problem, include serial output. Don't forget to
+ *	http://forum.mysensors.org/ and explain your problem, include serial output. Don't forget to
-	turn on DEBUG in libraries\MySensors\MyConfig.h also.
+ *	turn on DEBUG in libraries\MySensors\MyConfig.h also.
-
+ *
-	MQTT_FIRST_SENSORID is for 'DHCP' server in MyMQTT. You may limit the ID's with FIRST and LAST definition.
+ *	MQTT_FIRST_SENSORID is for 'DHCP' server in MyMQTT. You may limit the ID's with FIRST and LAST definition.
-	If you want your manually configured below 20 set MQTT_FIRST_SENSORID to 20.
+ *	If you want your manually configured below 20 set MQTT_FIRST_SENSORID to 20.
-	To disable: set MQTT_FIRST_SENSORID to 255.
+ *	To disable: set MQTT_FIRST_SENSORID to 255.
-
+ *
-	MQTT_BROKER_PREFIX is the leading prefix for your nodes. This can be only one char if like.
+ *	MQTT_BROKER_PREFIX is the leading prefix for your nodes. This can be only one char if like.
-
+ *
-	MQTT_SEND_SUBSCRIPTION is if you want the MyMQTT to send a empty payload message to your nodes.
+ *	MQTT_SEND_SUBSCRIPTION is if you want the MyMQTT to send a empty payload message to your nodes.
-	This can be useful if you want to send latest state back to the MQTT client. Just check if incoming
+ *	This can be useful if you want to send latest state back to the MQTT client. Just check if incoming
-	message has any length or not.
+ *	message has any length or not.
-	Example: if (msg.type==V_LIGHT && strlen(msg.getString())>0) otherwise the code might do strange things.
+ *	Example: if (msg.type==V_LIGHT && strlen(msg.getString())>0) otherwise the code might do strange things.
-
+ *
-* Address-layout is : [MQTT_BROKER_PREFIX]/[NodeID]/[SensorID]/V_[SensorType]
+ * (*) Address-layout is : [MQTT_BROKER_PREFIX]/[NodeID]/[SensorID]/V_[SensorType]
-	NodeID and SensorID is uint8 (0-255) number.
+ *	NodeID and SensorID is uint8 (0-255) number.
-	Last segment is translation of the sensor type, look inside MyMQTT.cpp for the definitions.
+ *	Last segment is translation of the sensor type, look inside MyMQTT.cpp for the definitions.
-	User can change this to their needs. We have also left some space for custom types.
+ *	User can change this to their needs. We have also left some space for custom types.
-
+ *
-Special: (sensor 255 reserved for special commands)
+ * Special: (sensor 255 reserved for special commands)
-You can receive a node sketch name with MyMQTT/20/255/V_Sketch_name (or version with _version)
+ * You can receive a node sketch name with MyMQTT/20/255/V_Sketch_name (or version with _version)
-
+ *
-To-do:
+ * To-do:
-Special commands : clear or set EEPROM Values, Send REBOOT and Receive reboot for MyMQTT itself.
+ * Special commands : clear or set EEPROM Values, Send REBOOT and Receive reboot for MyMQTT itself.
-Be able to send ACK so client returns the data being sent.
+ * Be able to send ACK so client returns the data being sent.
-... Please come with ideas!
+ * ... Please come with ideas!
-What to do with publish messages.
+ * What to do with publish messages.
-
+ *
-Test in more MQTT clients, So far tested in openhab and MyMQTT for Android (Not my creation)
+ * Test in more MQTT clients, So far tested in openhab and MyMQTT for Android (Not my creation)
- http://www.openhab.org/
+ * - http://www.openhab.org/
- https://play.google.com/store/apps/details?id=at.tripwire.mqtt.client&hl=en
+ * - https://play.google.com/store/apps/details?id=at.tripwire.mqtt.client&hl=en
-... Please notify me if you use this broker with other software.
+ * ... Please notify me if you use this broker with other software.
-
+ * 
 *  How to set-up Openhab and MQTTGateway:
-http://forum.mysensors.org/topic/303/mqtt-broker-gateway
+ * http://forum.mysensors.org/topic/303/mqtt-broker-gateway
 */
 #include <DigitalIO.h>
@@ -1,3 +1,32 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Henrik Ekblad
 * 
 * DESCRIPTION
 * Motion Sensor example using HC-SR501 
 * http://www.mysensors.org/build/motion
 *
 */
 #include <MySensor.h>  
 #include <SPI.h>
@@ -1,9 +1,36 @@
-// Default sensor sketch for MySensor Micro module
+/**
-// Act as a temperature / humidity sensor by default.
+ * The MySensors Arduino library handles the wireless radio link and protocol
-//
+ * between your home built sensors/actuators and HA controller of choice.
-// If A0 is held low while powering on, it will enter testmode, which verifies all on-board peripherals
+ * The sensors forms a self healing radio network with optional repeaters. Each
-// 
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
-// Battery voltage is repported as child sensorId 199, as well as battery percentage
+ * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Thomas Bowman Mørch
 * 
 * DESCRIPTION
 * Default sensor sketch for MySensor Sensebender Micro module
 * Act as a temperature / humidity sensor by default.
 *
 * If A0 is held low while powering on, it will enter testmode, which verifies all on-board peripherals
 * 
 * Battery voltage is repported as child sensorId 199, as well as battery percentage
 *
 */
 #include <MySensor.h>
@@ -1,3 +1,32 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Henrik Ekblad
 * 
 * DESCRIPTION
 * Pressure sensor example using BMP085 module  
 * http://www.mysensors.org/build/pressure
 *
 */
 #include <SPI.h>
 #include <MySensor.h>  
 #include <Wire.h>
@@ -1,4 +1,27 @@
-/*
+/**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Henrik Ekblad
 * 
 * DESCRIPTION
 * This sketch demonstrates how to use InterruptChain to receive and
 * decode remote switches (old and new) and remote sensors.
 *
@@ -15,7 +38,6 @@
 * Setup:
 * - connect a 433MHz receiver on digital pin 2.
 *
 *
 * MySensor note: This example has not yet been adopted but can be used as an example
 * of receiving 433Mhz stuff. 
 * 
@@ -1,25 +1,46 @@
-/* 
+/**
-  RFID Lock sensor/actuator
+ * The MySensors Arduino library handles the wireless radio link and protocol
-  
+ * between your home built sensors/actuators and HA controller of choice.
-  Henrik Ekblad <henrik.ekblad@mysensors.org>
+ * The sensors forms a self healing radio network with optional repeaters. Each
-
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
-  Use RFID tag to lock/unlock a door or trigger a scene on your controller.
+ * network topology allowing messages to be routed to nodes.
-  This example sketch allows you to add an optional relay or solenoid 
+ *
-  which can be activated/opened by RFID or controller.  
+ * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
-
+ * Copyright (C) 2013-2015 Sensnology AB
-  Use the I2C wiring option for your RFID module and connect to the following Arduino pins.
+ * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
-  
+ *
-  RFID       Arduino
+ * Documentation: http://www.mysensors.org
-  -----      -------
+ * Support Forum: http://forum.mysensors.org
-  GND   ->   GND
+ *
-  VCC   ->   +5V
+ * This program is free software; you can redistribute it and/or
-  SCL   ->   A5
+ * modify it under the terms of the GNU General Public License
-  SDA   ->   A4
+ * version 2 as published by the Free Software Foundation.
-  
+ *
-  Use normal wiring for NRF24L01 radio
+ *******************************
-  
+ *
-  Attach a optional relay or solonoid lock to pin 4
+ * REVISION HISTORY
-  
+ * Version 1.0 - Henrik Ekblad
 * 
 * DESCRIPTION
 * RFID Lock sensor/actuator
 * 
 * Use RFID tag to lock/unlock a door or trigger a scene on your controller.
 * This example sketch allows you to add an optional relay or solenoid 
 * which can be activated/opened by RFID or controller.  
 *
 * Use the I2C wiring option for your RFID module and connect to the following Arduino pins.
 * 
 * RFID       Arduino
 * -----      -------
 * GND   ->   GND
 * VCC   ->   +5V
 * SCL   ->   A5
 * SDA   ->   A4
 * 
 * Use normal wiring for NRF24L01 radio
 * 
 * Attach a optional relay or solonoid lock to pin 4
 * http://www.mysensors.org/build/rfid 
 */
 #include <MySensor.h>  
@@ -1,18 +1,43 @@
-
+/**
-// Example sketch showing how to request time from controller which is stored in RTC module
+ * The MySensors Arduino library handles the wireless radio link and protocol
-// The time and temperature (DS3231/DS3232) is shown on an attached Crystal LCD display
+ * between your home built sensors/actuators and HA controller of choice.
-// 
+ * The sensors forms a self healing radio network with optional repeaters. Each
-// Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
-// Inspired by Gregl
+ * network topology allowing messages to be routed to nodes.
-
+ *
-// Wiring (radio wiring on www.mysensors.org)
+ * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
-// ------------------------------------
+ * Copyright (C) 2013-2015 Sensnology AB
-// Arduino   RTC-Module     I2C Display 
+ * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
-// ------------------------------------
+ *
-// GND       GND            GND
+ * Documentation: http://www.mysensors.org
-// +5V       VCC            VCC
+ * Support Forum: http://forum.mysensors.org
-// A4        SDA            SDA
+ *
-// A5        SCL            SCL
+ * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Henrik Ekblad
 * 
 * DESCRIPTION
 * Example sketch showing how to request time from controller which is stored in RTC module
 * The time and temperature (DS3231/DS3232) is shown on an attached Crystal LCD display
 * 
 *
 * Wiring (radio wiring on www.mysensors.org)
 * ------------------------------------
 * Arduino   RTC-Module     I2C Display 
 * ------------------------------------
 * GND       GND            GND
 * +5V       VCC            VCC
 * A4        SDA            SDA
 * A5        SCL            SCL
 *
 * http://www.mysensors.org/build/display
 *
 */
 #include <SPI.h>
@@ -1,5 +1,31 @@
-// Example sketch showing how to control physical relays. 
+/**
-// This example will remember relay state even after power failure.
+ * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Henrik Ekblad
 * 
 * DESCRIPTION
 * Example sketch showing how to control physical relays. 
 * This example will remember relay state after power failure.
 * http://www.mysensors.org/build/relay
 */ 
 #include <MySigningNone.h>
 #include <MyTransportNRF24.h>
@@ -1,7 +1,33 @@
-// Example sketch för a "light switch" where you can control light or something 
+/**
-// else from both vera and a local physical button (connected between digital
+ * The MySensors Arduino library handles the wireless radio link and protocol
-// pin 3 and GND).
+ * between your home built sensors/actuators and HA controller of choice.
-// This node also works as a repeader for other nodes
+ * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Henrik Ekblad
 * 
 * DESCRIPTION
 * Example sketch for a "light switch" where you can control light or something 
 * else from both HA controller and a local physical button 
 * (connected between digital pin 3 and GND).
 * This node also works as a repeader for other nodes
 * http://www.mysensors.org/build/relay
 */ 
 #include <MySensor.h>
 #include <SPI.h>
@@ -1,7 +1,32 @@
-// Example sketch showing how to create a node thay repeates messages
+/**
-// from nodes far from gateway back to gateway. 
+ * The MySensors Arduino library handles the wireless radio link and protocol
-// It is important that nodes that has enabled repeater mode calls  
+ * between your home built sensors/actuators and HA controller of choice.
-// gw.preocess() frequently. This node should never sleep. 
+ * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Henrik Ekblad
 * 
 * DESCRIPTION
 * Example sketch showing how to create a node thay repeates messages
 * from nodes far from gateway back to gateway. 
 * It is important that nodes that has enabled repeater mode calls  
 * gw.process() frequently. Repeaters should never sleep. 
 */
 #include <MySensor.h>
 #include <SPI.h>
@@ -1,27 +1,53 @@
-/* Secret Knock Sensor
+/**
-
+ * The MySensors Arduino library handles the wireless radio link and protocol
-   See original instructions here (note: The MySensors adopted code might differ in wiring. The instructions below is correct):
+ * between your home built sensors/actuators and HA controller of choice.
-   https://learn.adafruit.com/secret-knock-activated-drawer-lock/ 
+ * The sensors forms a self healing radio network with optional repeaters. Each
-   Version 13.10.31  Built with Arduino IDE 1.0.5
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
-   
+ * network topology allowing messages to be routed to nodes.
-   By Steve Hoefer http://grathio.com
+ *
-   Adapted to MySensors by Henrik Ekblad
+ * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
-   
+ * Copyright (C) 2013-2015 Sensnology AB
-   Licensed under Creative Commons Attribution-Noncommercial-Share Alike 3.0
+ * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
-   http://creativecommons.org/licenses/by-nc-sa/3.0/us/
+ *
-   (In short: Do what you want, as long as you credit me, don't relicense it, and don't sell it or use it in anything you sell without contacting me.)
+ * Documentation: http://www.mysensors.org
-   
+ * Support Forum: http://forum.mysensors.org
-   ------Wiring------
+ *
-   Pin 0: Program button used for recording a new Knock (connect Pin0 -> button -> GND) 
+ * This program is free software; you can redistribute it and/or
-   Pin 1: Optional: Connect LED here (remember resisor in series)
+ * modify it under the terms of the GNU General Public License
-   Pin 2: Optional: Piezo element (for beeps). 
+ * version 2 as published by the Free Software Foundation.
-   Pin 5: A sound sensor (digital output) for sensing knocks. See MySensors purchase guide. I used this: http://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=2&pub=5575069610&toolid=10001&campid=5337433187&customid=&icep_item=200941260251&ipn=psmain&icep_vectorid=229466&kwid=902099&mtid=824&kw=lg 
+ *
-   Pin 4: Connects to either 1. Relay which open door or lock or 
+ *******************************
-                             2. transistor that opens a solenoid lock when HIGH (see adafruit guide for this option).
+ *
-                                 
+ * REVISION HISTORY
- 
+ * Version 1.0 - Henrik Ekblad
-   Connect radio according as usual(you can skip IRQ pin) 
+ * 
-   http://www.mysensors.org/build/connect_radio 
+ * DESCRIPTION
 *
 * Secret Knock Sensor
 * http://www.mysensors.org/build/knock
 *
 * See original instructions here (note: The MySensors adopted code might differ in wiring. The instructions below is correct):
 * https://learn.adafruit.com/secret-knock-activated-drawer-lock/ 
 * Version 13.10.31  Built with Arduino IDE 1.0.5
 * 
 * By Steve Hoefer http://grathio.com
 * Adapted to MySensors by Henrik Ekblad
 * 
 * Licensed under Creative Commons Attribution-Noncommercial-Share Alike 3.0
 * http://creativecommons.org/licenses/by-nc-sa/3.0/us/
 * (In short: Do what you want, as long as you credit me, don't relicense it, and don't sell it or use it in anything you sell without contacting me.)
 * 
 * ------Wiring------
 * Pin 0: Program button used for recording a new Knock (connect Pin0 -> button -> GND) 
 * Pin 1: Optional: Connect LED here (remember resisor in series)
 * Pin 2: Optional: Piezo element (for beeps). 
 * Pin 5: A sound sensor (digital output) for sensing knocks. See MySensors purchase guide. I used this: http://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=2&pub=5575069610&toolid=10001&campid=5337433187&customid=&icep_item=200941260251&ipn=psmain&icep_vectorid=229466&kwid=902099&mtid=824&kw=lg 
 * Pin 4: Connects to either 1. Relay which open door or lock or 
 *                           2. transistor that opens a solenoid lock when HIGH (see adafruit guide for this option).
 *                               
 *
 * Connect radio according as usual(you can skip IRQ pin) 
 * http://www.mysensors.org/build/connect_radio 
 */
 #include <MySensor.h>  
@@ -1,5 +1,31 @@
-// Example sketch showing how to securely control locks. 
+/**
-// This example will remember lock state even after power failure.
+ * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Patrick "Anticimex" Fallberg <patrick@fallberg.net>
 * 
 * DESCRIPTION
 * Example sketch showing how to securely control locks. 
 * This example will remember lock state even after power failure.
 */
 #define USE_SOFTWARE_ATSHA // Disable to use ATSHA204A circuit
@@ -1,3 +1,23 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 */
 #ifndef __GATEWAYUTIL_H__
 #define __GATEWAYUTIL_H__
@@ -133,7 +153,7 @@ void parseAndSend(MySensor gw, char *commandBuffer) {
 }
 void setInclusionMode(boolean newMode) {
-  if (newMode != inclusionMode)
+  if (newMode != inclusionMode) {
    inclusionMode = newMode;
    // Send back mode change on serial line to ack command
    serial(PSTR("0;0;%d;0;%d;%d\n"), C_INTERNAL, I_INCLUSION_MODE, inclusionMode?1:0);
@@ -142,6 +162,7 @@ void setInclusionMode(boolean newMode) {
      inclusionStartTime = millis();
    }
  }
 }
@@ -193,3 +214,4 @@ void errBlink(uint8_t cnt) {
 #endif // ARDUINO
 #endif 
@@ -1,10 +1,23 @@
-  /*
+/**
- * Copyright (C) 2013-2014 Henrik Ekblad <henrik.ekblad@gmail.com>
+ * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * DESCRIPTION
 * The ArduinoGateway prints data received from sensors on the serial link. 
 * The gateway accepts input on seral which will be sent out on radio network.
@@ -19,6 +32,7 @@
 * - RX (green) - blink fast on radio message recieved. In inclusion mode will blink fast only on presentation recieved
 * - TX (yellow) - blink fast on radio message transmitted. In inclusion mode will blink slowly
 * - ERR (red) - fast blink on error during transmission error or recieve crc error 
 * 
 */
 #define NO_PORTB_PINCHANGES  
@@ -139,3 +153,4 @@ void serialEvent() {
@@ -1,9 +1,35 @@
-// Example showing how to create an atuator for a servo.
+/**
-// Connect red to +5V, Black or brown to GND and the last cable to Digital pin 3.
+ * The MySensors Arduino library handles the wireless radio link and protocol
-// The servo consumes much power and should probably have its own powersource.'
+ * between your home built sensors/actuators and HA controller of choice.
-// The arduino might spontanally restart if too much power is used (happend
+ * The sensors forms a self healing radio network with optional repeaters. Each
-// to me when servo tried to pass the extreme positions = full load).
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
-// Contribution by: Derek Macias
+ * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Henrik Ekblad
 * Contribution by: Derek Macias
 * 
 * DESCRIPTION
 * Example showing how to create an atuator for a servo.
 * Connect red to +5V, Black or brown to GND and the last cable to Digital pin 3.
 * The servo consumes much power and should probably have its own powersource.'
 * The arduino might spontanally restart if too much power is used (happend
 * to me when servo tried to pass the extreme positions = full load).
 * http://www.mysensors.org/build/servo
 */
 #include <MySensor.h>
@@ -1,24 +1,47 @@
-/* SHA204 personalization sketch
+/**
-   by: Patrick Fallberg
+ * The MySensors Arduino library handles the wireless radio link and protocol
-   date: January 10, 2015
+ * between your home built sensors/actuators and HA controller of choice.
-   
+ * The sensors forms a self healing radio network with optional repeaters. Each
-   This sketch will write factory default settings to the configuration zone
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
-   and then lock it.
+ * network topology allowing messages to be routed to nodes.
-   It will then either
+ *
-   a. Generate a random value to use as a key which will be stored in
+ * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
-   slot 0. The key is printed on UART (115200) in clear text for the user to be
+ * Copyright (C) 2013-2015 Sensnology AB
-   able to use it as a user-supplied key in other personalization executions
+ * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
-   where the same key is needed.
+ *
-   b. Use a user-supplied value to use as a key which will be stored in
+ * Documentation: http://www.mysensors.org
-   slot 0.
+ * Support Forum: http://forum.mysensors.org
-   Finally it will lock the data zone.
+ *
-
+ * This program is free software; you can redistribute it and/or
-   By default, no locking is performed. User have to manually enable the flags that
+ * modify it under the terms of the GNU General Public License
-   turn on the locking. Furthermore, user have to send a SPACE character on serial
+ * version 2 as published by the Free Software Foundation.
-   console when prompted to do any locking. On boards that does not provide UART
+ *
-   input it is possible to configure the sketch to skip this confirmation.
+ *******************************
-   Default settings use ATSHA204 on pin 17 (A3).
+ *
 * REVISION HISTORY
 * Version 1.0 - Patrick Fallberg, January 10, 2015
 * 
 * DESCRIPTION
 * SHA204 personalization sketch
 *
 * This sketch will write factory default settings to the configuration zone
 * and then lock it.
 * It will then either
 * a. Generate a random value to use as a key which will be stored in
 * slot 0. The key is printed on UART (115200) in clear text for the user to be
 * able to use it as a user-supplied key in other personalization executions
 * where the same key is needed.
 * b. Use a user-supplied value to use as a key which will be stored in
 * slot 0.
 * Finally it will lock the data zone.
 *
 * By default, no locking is performed. User have to manually enable the flags that
 * turn on the locking. Furthermore, user have to send a SPACE character on serial
 * console when prompted to do any locking. On boards that does not provide UART
 * input it is possible to configure the sketch to skip this confirmation.
 * Default settings use ATSHA204 on pin 17 (A3).
 */
 #include <sha204_library.h>
 #include <sha204_lib_return_codes.h>
@@ -1,3 +1,31 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Henrik Ekblad
 * 
 * DESCRIPTION
 * Example sketch sending soil moisture alarm to controller 
 * http://www.mysensors.org/build/moisture
 */
 #include <SPI.h>
 #include <MySensor.h>  
@@ -1,6 +1,30 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Henrik Ekblad
 * 
 * DESCRIPTION
 * Example sketch showing how to request time from controller. 
 */
 // Example sketch showing how to request time from controller. 
 // Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 #include <SPI.h>
 #include <MySensor.h>  
@@ -1,5 +1,28 @@
-
+/**
-/*
+ * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Henrik Ekblad
 * 
 * DESCRIPTION
 * http://www.mysensors.org/build/scene_controller
 * Touch Display Scene Controller build using a touch enabled tft display
 * attached to a ATMega 2560. This example fetches time from controller and sends
 * in scene commands to the controller. 
@@ -1,22 +1,43 @@
-#include <SPI.h>
+/**
-#include <MySensor.h>  
+ * The MySensors Arduino library handles the wireless radio link and protocol
-/*
+ * between your home built sensors/actuators and HA controller of choice.
-  Arduino UVM-30A
+ * The sensors forms a self healing radio network with optional repeaters. Each
-
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
-  connect the sensor as follows :
+ * network topology allowing messages to be routed to nodes.
-
+ *
-  +   >>> 5V
+ * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
-  -   >>> GND
+ * Copyright (C) 2013-2015 Sensnology AB
-  out >>> A0     
+ * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
-  
+ *
-  Contribution: epierre, bulldoglowell, gizmocuz
+ * Documentation: http://www.mysensors.org
-
+ * Support Forum: http://forum.mysensors.org
-  Index table taken from: http://www.elecrow.com/sensors-c-111/environment-c-111_112/uv-sensor-moduleuvm30a-p-716.html
+ *
-  Because this table is pretty lineair, we can calculate a UVI with one decimal 
+ * This program is free software; you can redistribute it and/or
-
+ * modify it under the terms of the GNU General Public License
-  License: Attribution-NonCommercial-ShareAlike 3.0 Unported (CC BY-NC-SA 3.0)
+ * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - epierre
 * Contribution: bulldoglowell, gizmocuz
 * 
 * DESCRIPTION
 * Arduino UVM-30A
 * Index table taken from: http://www.elecrow.com/sensors-c-111/environment-c-111_112/uv-sensor-moduleuvm30a-p-716.html
 * Because this table is pretty lineair, we can calculate a UVI with one decimal 
 *
 * Connect sensor:
 *
 *   +   >>> 5V
 *   -   >>> GND
 *   out >>> A0     
 * 
 * License: Attribution-NonCommercial-ShareAlike 3.0 Unported (CC BY-NC-SA 3.0)
 */
 #include <SPI.h>
 #include <MySensor.h>  
 #include <MySensor.h>  
 #include <SPI.h>
@@ -1,13 +1,37 @@
-//
+/**
-// Use this sensor to measure volume and flow of your house watermeter.
+ * The MySensors Arduino library handles the wireless radio link and protocol
-// You need to set the correct pulsefactor of your meter (pulses per m3).
+ * between your home built sensors/actuators and HA controller of choice.
-// The sensor starts by fetching current volume reading from gateway (VAR 1).
+ * The sensors forms a self healing radio network with optional repeaters. Each
-// Reports both volume and flow back to gateway.
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
-//
+ * network topology allowing messages to be routed to nodes.
-// Unfortunately millis() won't increment when the Arduino is in 
+ *
-// sleepmode. So we cannot make this sensor sleep if we also want  
+ * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
-// to calculate/report flow.
+ * Copyright (C) 2013-2015 Sensnology AB
-//
+ * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Henrik Ekblad
 * 
 * DESCRIPTION
 * Use this sensor to measure volume and flow of your house watermeter.
 * You need to set the correct pulsefactor of your meter (pulses per m3).
 * The sensor starts by fetching current volume reading from gateway (VAR 1).
 * Reports both volume and flow back to gateway.
 *
 * Unfortunately millis() won't increment when the Arduino is in 
 * sleepmode. So we cannot make this sensor sleep if we also want  
 * to calculate/report flow.
 * http://www.mysensors.org/build/pulse_water
 */
 #include <SPI.h>
 #include <MySensor.h>