Update file headers.

2015-04-08 21:14:52 +02:00
parent d2dacd8670
commit caaadf44cf
67 changed files with 1795 additions and 401 deletions
@@ -1,3 +1,23 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */
 #ifndef MyConfig_h
 #define MyConfig_h
 #include <stdint.h>
@@ -1,3 +1,22 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */
 #include "MyHw.h"
 MyHw::MyHw() {
@@ -1,3 +1,22 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */
 #ifndef MyHw_h
 #define MyHw_h
@@ -1,3 +1,22 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */
 #include "MyHw.h"
 #include "MyHwATMega328.h"
@@ -1,3 +1,22 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */
 #ifndef MyHwATMega328_h
 #define MyHwATMega328_h
@@ -1,3 +1,23 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */
 #include "MyMessage.h"
 #include <stdio.h>
 #include <stdlib.h>
@@ -1,14 +1,23 @@
-/*
+/**
- The MySensors library adds a new layer on top of the RF24 library.
+ * The MySensors Arduino library handles the wireless radio link and protocol
- It handles radio network routing, relaying and ids.
+ * between your home built sensors/actuators and HA controller of choice.
-
+ * The sensors forms a self healing radio network with optional repeaters. Each
- Created by Henrik Ekblad <henrik.ekblad@gmail.com>
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
-
+ * network topology allowing messages to be routed to nodes.
- This program is free software; you can redistribute it and/or
+ *
- modify it under the terms of the GNU General Public License
+ * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
- version 2 as published by the Free Software Foundation.
+ * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */
 #ifndef MyMessage_h
 #define MyMessage_h
@@ -1,3 +1,22 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */
 #include "MyParser.h"
 MyParser::MyParser() {
@@ -1,3 +1,22 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */
 #ifndef MyParser_h
 #define MyParser_h
@@ -1,3 +1,22 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */
 #include "MyParser.h"
 #include "MyParserSerial.h"
 #include "MyTransport.h"
@@ -1,3 +1,22 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */
 #ifndef MyParserSerial_h
 #define MyParserSerial_h
@@ -1,14 +1,23 @@
- /*
+/**
- The MySensors library adds a new layer on top of the RF24 library.
+ * The MySensors Arduino library handles the wireless radio link and protocol
- It handles radio network routing, relaying and ids.
+ * between your home built sensors/actuators and HA controller of choice.
-
+ * The sensors forms a self healing radio network with optional repeaters. Each
- Created by Henrik Ekblad <henrik.ekblad@gmail.com>
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
-
+ * network topology allowing messages to be routed to nodes.
- This program is free software; you can redistribute it and/or
+ *
- modify it under the terms of the GNU General Public License
+ * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
- version 2 as published by the Free Software Foundation.
+ * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */
 #include "MySensor.h"
 #define DISTANCE_INVALID (0xFF)
@@ -101,9 +110,9 @@ void MySensor::begin(void (*_msgCallback)(const MyMessage &), uint8_t _nodeId, b
 	if (isGateway) {
 		// Set configuration for gateway
-		nc.parentNodeId = 0;
+		nc.parentNodeId = GATEWAY_ADDRESS;
 		nc.distance = 0;
-		nc.nodeId = 0;
+		nc.nodeId = GATEWAY_ADDRESS;
 	} else {
 		// Read settings from eeprom
 		hw_readConfigBlock((void*)&nc, (void*)EEPROM_NODE_ID_ADDRESS, sizeof(NodeConfig));
@@ -1,13 +1,22 @@
-/*
+/**
- The MySensors library adds a new layer on top of the RF24 library.
+ * The MySensors Arduino library handles the wireless radio link and protocol
- It handles radio network routing, relaying and ids.
+ * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */
 Created by Henrik Ekblad <henrik.ekblad@gmail.com>
 This program is free software; you can redistribute it and/or
 modify it under the terms of the GNU General Public License
 version 2 as published by the Free Software Foundation.
 */
 #ifndef MySensor_h
 #define MySensor_h
@@ -1,3 +1,22 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */
 #include "MySigning.h"
 MySigning::MySigning(bool requestSignatures) : _requestSignatures(requestSignatures) {
@@ -1,9 +1,29 @@
-/*
+/**
- The MySigning driver provides a generic API for various signing backends to offer
+ * The MySensors Arduino library handles the wireless radio link and protocol
- signing of MySensors messages.
+ * between your home built sensors/actuators and HA controller of choice.
- 
+ * The sensors forms a self healing radio network with optional repeaters. Each
- Created by Patrick "Anticimex" Fallberg <patrick@fallberg.net>
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
-*/
+ * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * DESCRIPTION
 * Signing support created by Patrick "Anticimex" Fallberg <patrick@fallberg.net>
 * The MySigning driver provides a generic API for various signing backends to offer
 * signing of MySensors messages.
 *
 */
 #ifndef MySigning_h
 #define MySigning_h
@@ -1,9 +1,30 @@
-/*
+/**
- ATSHA204 signing backend. The Atmel ATSHA204 offers true random number generation and
+ * The MySensors Arduino library handles the wireless radio link and protocol
- HMAC-SHA256 authentication with a readout-protected key.
+ * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * DESCRIPTION
 * Signing support created by Patrick "Anticimex" Fallberg <patrick@fallberg.net>
 * ATSHA204 signing backend. The Atmel ATSHA204 offers true random number generation and
 * HMAC-SHA256 authentication with a readout-protected key.
 *
 */
 Created by Patrick "Anticimex" Fallberg <patrick@fallberg.net>
 */
 #include "MySigning.h"
 #include "MySigningAtsha204.h"
@@ -1,9 +1,30 @@
-/*
+/**
- ATSHA204 signing backend. The Atmel ATSHA204 offers true random number generation and
+ * The MySensors Arduino library handles the wireless radio link and protocol
- HMAC-SHA256 authentication with a readout-protected key.
+ * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * DESCRIPTION
 * Signing support created by Patrick "Anticimex" Fallberg <patrick@fallberg.net>
 * ATSHA204 signing backend. The Atmel ATSHA204 offers true random number generation and
 * HMAC-SHA256 authentication with a readout-protected key.
 *
 */
 Created by Patrick "Anticimex" Fallberg <patrick@fallberg.net>
 */
 #ifndef MySigningAtsha204_h
 #define MySigningAtsha204_h
@@ -1,12 +1,33 @@
-/*
+/**
- ATSHA204 emulated signing backend. The emulated ATSHA204 implementation offers pseudo random
+ * The MySensors Arduino library handles the wireless radio link and protocol
- number generation and HMAC-SHA256 authentication compatible with a "physical" ATSHA204.
+ * between your home built sensors/actuators and HA controller of choice.
- NOTE: Key is stored in clear text in the Arduino firmware. Therefore, the use of this back-end
+ * The sensors forms a self healing radio network with optional repeaters. Each
- could compromise the key used in the signed message infrastructure if device is lost and its memory
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
- dumped.
+ * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * DESCRIPTION
 * Signing support created by Patrick "Anticimex" Fallberg <patrick@fallberg.net>
 * ATSHA204 emulated signing backend. The emulated ATSHA204 implementation offers pseudo random
 * number generation and HMAC-SHA256 authentication compatible with a "physical" ATSHA204.
 * NOTE: Key is stored in clear text in the Arduino firmware. Therefore, the use of this back-end
 * could compromise the key used in the signed message infrastructure if device is lost and its memory
 * dumped.
 *
 */
 Created by Patrick "Anticimex" Fallberg <patrick@fallberg.net>
 */
 #include "MyConfig.h"
 #include "MySigning.h"
 #include "MySigningAtsha204Soft.h"
@@ -1,12 +1,33 @@
-/*
+/**
- ATSHA204 emulated signing backend. The emulated ATSHA204 implementation offers pseudo random
+ * The MySensors Arduino library handles the wireless radio link and protocol
- number generation and HMAC-SHA256 authentication compatible with a "physical" ATSHA204.
+ * between your home built sensors/actuators and HA controller of choice.
- NOTE: Key is stored in clear text in the Arduino firmware. Therefore, the use of this back-end
+ * The sensors forms a self healing radio network with optional repeaters. Each
- could compromise the key used in the signed message infrastructure if device is lost and its memory
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
- dumped.
+ * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * DESCRIPTION
 * Signing support created by Patrick "Anticimex" Fallberg <patrick@fallberg.net>
 * ATSHA204 emulated signing backend. The emulated ATSHA204 implementation offers pseudo random
 * number generation and HMAC-SHA256 authentication compatible with a "physical" ATSHA204.
 * NOTE: Key is stored in clear text in the Arduino firmware. Therefore, the use of this back-end
 * could compromise the key used in the signed message infrastructure if device is lost and its memory
 * dumped.
 *
 */
 Created by Patrick "Anticimex" Fallberg <patrick@fallberg.net>
 */
 #ifndef MySigningHmac256Soft_h
 #define MySigningHmac256Soft_h
@@ -1,8 +1,30 @@
-/*
+/**
- Disabled signing backend. Does not provide any security measures.
+ * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * DESCRIPTION
 * Signing support created by Patrick "Anticimex" Fallberg <patrick@fallberg.net>
 * Disabled signing backend. Does not provide any security measures.
 *
 */
 Created by Patrick "Anticimex" Fallberg <patrick@fallberg.net>
 */
 #include "MyConfig.h"
 #include "MySigning.h"
 #include "MySigningNone.h"
@@ -1,8 +1,30 @@
-/*
+/**
- Disabled signing backend. Does not provide any security measures.
+ * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * DESCRIPTION
 * Signing support created by Patrick "Anticimex" Fallberg <patrick@fallberg.net>
 * Disabled signing backend. Does not provide any security measures.
 *
 */
 Created by Patrick "Anticimex" Fallberg <patrick@fallberg.net>
 */
 #ifndef MySigningNone_h
 #define MySigningNone_h
@@ -1,3 +1,22 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */
 #include "MyTransport.h"
 MyTransport::MyTransport() {
@@ -1,3 +1,22 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */
 #ifndef MyTransport_h
 #define MyTransport_h
@@ -1,3 +1,22 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */
 #include "MyTransport.h"
 #include "MyTransportNRF24.h"
@@ -1,3 +1,22 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */
 #ifndef MyTransportNRF24_h
 #define MyTransportNRF24_h
@@ -1,3 +1,22 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */
 #include "MyTransport.h"
 #include "MyTransportRFM69.h"
@@ -1,3 +1,22 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */
 #ifndef MyTransportRF69_h
 #define MyTransportRF69_h
@@ -1,11 +1,11 @@
 /***
 *  This file defines the Sensor library version number 
 *  Normally, contributors should not modify this directly
- *  as it is manaaged by the MySensors Bot.
+ *  as it is managed by the MySensors Bot.
 */
 #ifndef Version_h
 #define Version_h
-#define LIBRARY_VERSION "1.4.1"
+#define LIBRARY_VERSION "1.5 b1"
 #endif
@@ -1,20 +1,38 @@
-/*
+/**
-  Vera Arduino MQ2
+ * The MySensors Arduino library handles the wireless radio link and protocol
-
+ * between your home built sensors/actuators and HA controller of choice.
-  connect the MQ2 sensor as follows :
+ * The sensors forms a self healing radio network with optional repeaters. Each
-
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
-  A H A   >>> 5V
+ * network topology allowing messages to be routed to nodes.
-  B		  >>> A0
+ *
-  H       >>> GND
+ * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
-  B       >>> 10K ohm >>> GND
+ * Copyright (C) 2013-2015 Sensnology AB
-  
+ * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
-  Contribution: epierre
+ *
-  Based on http://sandboxelectronics.com/?p=165
+ * Documentation: http://www.mysensors.org
-  
+ * Support Forum: http://forum.mysensors.org
-  License: Attribution-NonCommercial-ShareAlike 3.0 Unported (CC BY-NC-SA 3.0)
+ *
- 
+ * This program is free software; you can redistribute it and/or
-  Modified by HEK to work in 1.4
+ * modify it under the terms of the GNU General Public License
-*/
+ * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * DESCRIPTION
 *
 * Connect the MQ2 sensor as follows :
 * 
 *   A H A   >>> 5V
 *   B       >>> A0
 *   H       >>> GND
 *   B       >>> 10K ohm >>> GND
 * 
 * Contribution: epierre
 * Based on http://sandboxelectronics.com/?p=165
 * License: Attribution-NonCommercial-ShareAlike 3.0 Unported (CC BY-NC-SA 3.0)
 * Modified by HEK to work in 1.4
 * 
 */
 #include <SPI.h>
 #include <MySensor.h>  
@@ -1,6 +1,31 @@
-// This is an example that demonstrates how to report the battery level for a sensor
+/**
-// Instructions for measuring battery capacity on A0 are available in the follwoing forum
+ * The MySensors Arduino library handles the wireless radio link and protocol
-// thread: http://forum.micasaverde.com/index.php/topic,20078.0.html
+ * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * DESCRIPTION
 *
 * This is an example that demonstrates how to report the battery level for a sensor
 * Instructions for measuring battery capacity on A0 are available here:
 * http://www.mysensors.org/build/battery
 * 
 */
 #include <SPI.h>
 #include <MySensor.h>
@@ -1,6 +1,31 @@
-// Simple binary switch example 
+/**
-// Connect button or door/window reed switch between 
+ * The MySensors Arduino library handles the wireless radio link and protocol
-// digitial I/O pin 3 (BUTTON_PIN below) and GND.
+ * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * DESCRIPTION
 *
 * Simple binary switch example 
 * Connect button or door/window reed switch between 
 * digitial I/O pin 3 (BUTTON_PIN below) and GND.
 * http://www.mysensors.org/build/binary
 */
 #include <MySensor.h>
 #include <SPI.h>
@@ -1,9 +1,34 @@
-// Interrupt driven binary switch example with dual interrupts
+/**
-// Author: Patrick 'Anticimex' Fallberg
+ * The MySensors Arduino library handles the wireless radio link and protocol
-// Connect one button or door/window reed switch between 
+ * between your home built sensors/actuators and HA controller of choice.
-// digitial I/O pin 3 (BUTTON_PIN below) and GND and the other
+ * The sensors forms a self healing radio network with optional repeaters. Each
-// one in similar fashion on digital I/O pin 2.
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
-// This example is designed to fit Arduino Nano/Pro Mini
+ * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * DESCRIPTION
 *
 * Interrupt driven binary switch example with dual interrupts
 * Author: Patrick 'Anticimex' Fallberg
 * Connect one button or door/window reed switch between 
 * digitial I/O pin 3 (BUTTON_PIN below) and GND and the other
 * one in similar fashion on digital I/O pin 2.
 * This example is designed to fit Arduino Nano/Pro Mini
 * 
 */
 #include <MySensor.h>
 #include <SPI.h>
@@ -1,8 +1,28 @@
-/*
+/**
-*
+ * The MySensors Arduino library handles the wireless radio link and protocol
-* This sketch clears radioId, relayId and routing info in EEPROM 
+ * between your home built sensors/actuators and HA controller of choice.
-*
+ * The sensors forms a self healing radio network with optional repeaters. Each
-*/
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * DESCRIPTION
 *
 * This sketch clears radioId, relayId and other routing information in EEPROM back to factory default
 * 
 */
 #include <SPI.h>
 #include <EEPROM.h>  
@@ -1,4 +1,29 @@
-// Example sketch showing how to send in OneWire temperature readings
+/**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * DESCRIPTION
 *
 * Example sketch showing how to send in DS1820B OneWire temperature readings back to the controller
 * http://www.mysensors.org/build/temp
 */
 #include <MySensor.h>  
 #include <SPI.h>
 #include <DallasTemperature.h>
@@ -1,8 +1,27 @@
-/***
+/**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - February 15, 2014 - Bruce Lacey
 * Version 1.1 - August 13, 2014 - Converted to 1.4 (hek) 
 *
 * DESCRIPTION
 * This sketch provides a Dimmable LED Light using PWM and based Henrik Ekblad 
 * <henrik.ekblad@gmail.com> Vera Arduino Sensor project.  
@@ -13,12 +32,9 @@
 * to the LED negative terminal and the MOSFET Source pin is connected to ground.  
 *
 * This sketch is extensible to support more than one MOSFET/PWM dimmer per circuit.
- *
+ * http://www.mysensors.org/build/dimmer
- * REVISION HISTORY
+ */
- * Version 1.0 - February 15, 2014 - Bruce Lacey
+
 * Version 1.1 - August 13, 2014 - Converted to 1.4 (hek) 
 *
 ***/
 #define SN "DimmableLED"
 #define SV "1.1"
@@ -1,20 +1,33 @@
-/***
+/**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - January 30, 2015 - Developed by GizMoCuz (Domoticz)
 * 
 * DESCRIPTION
 * This sketch provides an example how to implement a Dimmable Light 
 * It is pure virtual and it logs messages to the serial output
 * It can be used as a base sketch for actual hardware.
 * Stores the last light state and level in eeprom.
 * 
- * Developed by GizMoCuz (Domoticz)
+ */
 *
 * REVISION HISTORY
 * Version 1.0 - January 30, 2015
 *
 ***/
 #include <SPI.h>
 #include <MySensor.h>  
@@ -1,3 +1,31 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Henrik EKblad
 * 
 * DESCRIPTION
 * This sketch provides an example how to implement a distance sensor using HC-SR04 
 * http://www.mysensors.org/build/distance
 */
 #include <SPI.h>
 #include <MySensor.h>  
 #include <NewPing.h>
@@ -1,21 +1,42 @@
-/*
+/**
-  Arduino Dust Sensort
+ * The MySensors Arduino library handles the wireless radio link and protocol
-
+ * between your home built sensors/actuators and HA controller of choice.
-  connect the sensor as follows :
+ * The sensors forms a self healing radio network with optional repeaters. Each
-
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
-  VCC       >>> 5V
+ * network topology allowing messages to be routed to nodes.
-  A         >>> A0
+ *
-  GND       >>> GND
+ * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
-
+ * Copyright (C) 2013-2015 Sensnology AB
-  Based on: http://www.dfrobot.com/wiki/index.php/Sharp_GP2Y1010AU 
+ * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
-  Authors: Cyrille Médard de Chardon (serialC), Christophe Trefois (Trefex)
+ *
-  Contribution: epierre
+ * Documentation: http://www.mysensors.org
-  COnverted to 1.4 by Henrik Ekblad
+ * Support Forum: http://forum.mysensors.org
-  
+ *
-  The dust sensor used (see purchase guide for latest link):
+ * This program is free software; you can redistribute it and/or
-  http://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=2&pub=5575069610&toolid=10001&campid=5337433187&customid=&icep_item=171259125886&ipn=psmain&icep_vectorid=229466&kwid=902099&mtid=824&kw=lg
+ * modify it under the terms of the GNU General Public License
-  
+ * version 2 as published by the Free Software Foundation.
-*/
+ *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - epierre
 * Converted to 1.4 by Henrik Ekblad
 * 
 * DESCRIPTION
 * Arduino Dust Sensort
 *
 * connect the sensor as follows :
 * 
 *   VCC       >>> 5V
 *   A         >>> A0
 *   GND       >>> GND
 *
 * Based on: http://www.dfrobot.com/wiki/index.php/Sharp_GP2Y1010AU 
 * Authors: Cyrille Médard de Chardon (serialC), Christophe Trefois (Trefex)
 * 
 * http://www.mysensors.org/build/dust
 * 
 */
 #include <MySensor.h>  
 #include <SPI.h>
@@ -1,11 +1,38 @@
-// Use this sensor to measure KWH and Watt of your house meeter
+/**
-// You need to set the correct pulsefactor of your meeter (blinks per KWH).
+ * The MySensors Arduino library handles the wireless radio link and protocol
-// The sensor starts by fetching current KWH value from gateway.
+ * between your home built sensors/actuators and HA controller of choice.
-// Reports both KWH and Watt back to gateway.
+ * The sensors forms a self healing radio network with optional repeaters. Each
-//
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
-// Unfortunately millis() won't increment when the Arduino is in 
+ * network topology allowing messages to be routed to nodes.
-// sleepmode. So we cannot make this sensor sleep if we also want 
+ *
-// to calculate/report watt-number.
+ * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Henrik EKblad
 * 
 * DESCRIPTION
 * This sketch provides an example how to implement a distance sensor using HC-SR04 
 * Use this sensor to measure KWH and Watt of your house meeter
 * You need to set the correct pulsefactor of your meeter (blinks per KWH).
 * The sensor starts by fetching current KWH value from gateway.
 * Reports both KWH and Watt back to gateway.
 *
 * Unfortunately millis() won't increment when the Arduino is in 
 * sleepmode. So we cannot make this sensor sleep if we also want 
 * to calculate/report watt-number.
 * http://www.mysensors.org/build/pulse_power
 */
 #include <SPI.h>
 #include <MySensor.h>  
@@ -1,14 +1,29 @@
-
+/**
-/*
+ * The MySensors Arduino library handles the wireless radio link and protocol
- * Copyright (C) 2013 Henrik Ekblad <henrik.ekblad@gmail.com>
+ * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
- * Contribution by a-lurker and Anticimex, 
+ * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
- * Contribution by Norbert Truchsess <norbert.truchsess@t-online.de>
+ * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Henrik EKblad
 * Contribution by a-lurker and Anticimex, 
 * Contribution by Norbert Truchsess <norbert.truchsess@t-online.de>
 *
 * 
 * DESCRIPTION
 * The EthernetGateway sends data received from sensors to the ethernet link. 
 * The gateway also accepts input on ethernet interface, which is then sent out to the radio network.
@@ -133,7 +133,7 @@ void parseAndSend(MySensor gw, char *commandBuffer) {
 }
 void setInclusionMode(boolean newMode) {
-  if (newMode != inclusionMode)
+  if (newMode != inclusionMode) {
    inclusionMode = newMode;
    // Send back mode change on serial line to ack command
    serial(PSTR("0;0;%d;0;%d;%d\n"), C_INTERNAL, I_INCLUSION_MODE, inclusionMode?1:0);
@@ -141,6 +141,7 @@ void setInclusionMode(boolean newMode) {
    if (inclusionMode) {
      inclusionStartTime = millis();
    }
  }
 }
@@ -1,3 +1,32 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Henrik EKblad
 * 
 * DESCRIPTION
 * This sketch provides an example how to implement a humidity/temperature
 * sensor using DHT11/DHT-22 
 * http://www.mysensors.org/build/humidity
 */
 #include <SPI.h>
 #include <MySensor.h>  
 #include <DHT.h>  
@@ -1,9 +1,35 @@
-// Example sketch showing how to control ir devices
+/**
-// An IR LED must be connected to Arduino PWM pin 3.
+ * The MySensors Arduino library handles the wireless radio link and protocol
-// An optional ir receiver can be connected to PWM pin 8. 
+ * between your home built sensors/actuators and HA controller of choice.
-// All receied ir signals will be sent to gateway device stored in VAR_1.
+ * The sensors forms a self healing radio network with optional repeaters. Each
-// When binary light on is clicked - sketch will send volume up ir command
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
-// When binary light off is clicked - sketch will send volume down ir command
+ * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Henrik EKblad
 * 
 * DESCRIPTION
 * Example sketch showing how to control ir devices
 * An IR LED must be connected to Arduino PWM pin 3.
 * An optional ir receiver can be connected to PWM pin 8. 
 * All receied ir signals will be sent to gateway device stored in VAR_1.
 * When binary light on is clicked - sketch will send volume up ir command
 * When binary light off is clicked - sketch will send volume down ir command
 * http://www.mysensors.org/build/ir
 */
 #include <MySensor.h>
 #include <SPI.h>
@@ -1,20 +1,41 @@
-/*
+/**
-  Vera Arduino BH1750FVI Light sensor
+ * The MySensors Arduino library handles the wireless radio link and protocol
-  communicate using I2C Protocol
+ * between your home built sensors/actuators and HA controller of choice.
-  this library enable 2 slave device addresses
+ * The sensors forms a self healing radio network with optional repeaters. Each
-  Main address  0x23
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
-  secondary address 0x5C
+ * network topology allowing messages to be routed to nodes.
-  connect the sensor as follows :
+ *
-
+ * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
-  VCC  >>> 5V
+ * Copyright (C) 2013-2015 Sensnology AB
-  Gnd  >>> Gnd
+ * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
-  ADDR >>> NC or GND  
+ *
-  SCL  >>> A5
+ * Documentation: http://www.mysensors.org
-  SDA  >>> A4
+ * Support Forum: http://forum.mysensors.org
-  
+ *
-  Contribution: idefix
+ * This program is free software; you can redistribute it and/or
- 
+ * modify it under the terms of the GNU General Public License
-*/
+ * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - idefix
 * 
 * DESCRIPTION
 * Arduino BH1750FVI Light sensor
 * communicate using I2C Protocol
 * this library enable 2 slave device addresses
 * Main address  0x23
 * secondary address 0x5C
 * connect the sensor as follows :
 *
 *   VCC  >>> 5V
 *   Gnd  >>> Gnd
 *   ADDR >>> NC or GND  
 *   SCL  >>> A5
 *   SDA  >>> A4
 * http://www.mysensors.org/build/light
 */
 #include <SPI.h>
 #include <MySensor.h>  
@@ -1,3 +1,31 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Henrik EKblad
 * 
 * DESCRIPTION
 * Example sketch showing how to measue light level using a LM393 photo-resistor 
 * http://www.mysensors.org/build/light
 */
 #include <SPI.h>
 #include <MySensor.h>  
@@ -1,14 +1,39 @@
-// MAX6875 Hight temperature sensor with range: -200 degC - +1300 degC 
+/**
-// Contribution by MrLynx
+ * The MySensors Arduino library handles the wireless radio link and protocol
-// http://forum.mysensors.org/topic/641/max6675
+ * between your home built sensors/actuators and HA controller of choice.
-//
+ * The sensors forms a self healing radio network with optional repeaters. Each
-// Connect:
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
-// MAX6675 - Arduino
+ * network topology allowing messages to be routed to nodes.
-//     CS0 - 4
+ *
-//      SO - 3 
+ * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
-//    SCLK - 5
+ * Copyright (C) 2013-2015 Sensnology AB
-//     VCC - 5V
+ * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
-//     GND - GND
+ *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - MrLynx
 * 
 * DESCRIPTION
 * MAX6875 High temperature sensor with range: -200 degC - +1300 degC 
 * http://forum.mysensors.org/topic/641/max6675
 *
 * Connect MAX6675 - Arduino
 *     CS0 - 4
 *      SO - 3 
 *    SCLK - 5
 *     VCC - 5V
 *     GND - GND
 *
 */
 #include <MySensor.h>
 #include <MAX6675.h>
@@ -1,60 +1,78 @@
-/* 				MyMQTT Broker Gateway 0.1b
+/**
-
+ * The MySensors Arduino library handles the wireless radio link and protocol
-Created by Daniel Wiegert <daniel.wiegert@gmail.com>
+ * between your home built sensors/actuators and HA controller of choice.
-Based on MySensors Ethernet Gateway by Henrik Ekblad <henrik.ekblad@gmail.com>
+ * The sensors forms a self healing radio network with optional repeaters. Each
-http://www.mysensors.org
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
-
+ * network topology allowing messages to be routed to nodes.
-Requires MySensors lib 1.4b
+ *
-
+ * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
-* Change below; TCP_IP, TCP_PORT, TCP_MAC
+ * Copyright (C) 2013-2015 Sensnology AB
-This will listen on your selected TCP_IP:TCP_PORT below, Please change TCP_MAC your liking also.
+ * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
-*1 -> NOTE: Keep first byte at x2, x6, xA or xE (replace x with any hex value) for using Local Ranges.
+ *
-
+ * Documentation: http://www.mysensors.org
-*2 You can use standard pin set-up as MySensors recommends or if you own a IBOARD you may change
+ * Support Forum: http://forum.mysensors.org
-	the radio-pins below if you hardware mod your iBoard. see [URL BELOW] for more details.
+ *
-	http://forum.mysensors.org/topic/224/iboard-cheap-single-board-ethernet-arduino-with-radio/5
+ * This program is free software; you can redistribute it and/or
-
+ * modify it under the terms of the GNU General Public License
-* Don't forget to look at the definitions in libraries\MySensors\MyMQTT.h!
+ * version 2 as published by the Free Software Foundation.
-
+ *
-	define TCPDUMP and connect serial interface if you have problems, please write on
+ *******************************
-	http://forum.mysensors.org/ and explain your problem, include serial output. Don't forget to
+ *
-	turn on DEBUG in libraries\MySensors\MyConfig.h also.
+ * REVISION HISTORY
-
+ * Version 1.0 - Created by Daniel Wiegert <daniel.wiegert@gmail.com>
-	MQTT_FIRST_SENSORID is for 'DHCP' server in MyMQTT. You may limit the ID's with FIRST and LAST definition.
+ * 
-	If you want your manually configured below 20 set MQTT_FIRST_SENSORID to 20.
+ * DESCRIPTION
-	To disable: set MQTT_FIRST_SENSORID to 255.
+ * MyMQTT Broker Gateway 0.1b
-
+ * Latest instructions found here:
-	MQTT_BROKER_PREFIX is the leading prefix for your nodes. This can be only one char if like.
+ * http://www.mysensors.org/build/mqtt_gateway
-
+ * http://www.mysensors.org/build/ethernet_gateway
-	MQTT_SEND_SUBSCRIPTION is if you want the MyMQTT to send a empty payload message to your nodes.
+ * 
-	This can be useful if you want to send latest state back to the MQTT client. Just check if incoming
+ * Change below; TCP_IP, TCP_PORT, TCP_MAC
-	message has any length or not.
+ * This will listen on your selected TCP_IP:TCP_PORT below, Please change TCP_MAC your liking also.
-	Example: if (msg.type==V_LIGHT && strlen(msg.getString())>0) otherwise the code might do strange things.
+ * 1 -> NOTE: Keep first byte at x2, x6, xA or xE (replace x with any hex value) for using Local Ranges.
-
+ * 2 You can use standard pin set-up as MySensors recommends or if you own a IBOARD you may change
-* Address-layout is : [MQTT_BROKER_PREFIX]/[NodeID]/[SensorID]/V_[SensorType]
+ *	the radio-pins below if you hardware mod your iBoard. see [URL BELOW] for more details.
-	NodeID and SensorID is uint8 (0-255) number.
+ *	http://forum.mysensors.org/topic/224/iboard-cheap-single-board-ethernet-arduino-with-radio/5
-	Last segment is translation of the sensor type, look inside MyMQTT.cpp for the definitions.
+ *
-	User can change this to their needs. We have also left some space for custom types.
+ * Don't forget to look at the definitions in MyMQTT.h!
-
+ *
-Special: (sensor 255 reserved for special commands)
+ *	define TCPDUMP and connect serial interface if you have problems, please write on
-You can receive a node sketch name with MyMQTT/20/255/V_Sketch_name (or version with _version)
+ *	http://forum.mysensors.org/ and explain your problem, include serial output. Don't forget to
-
+ *	turn on DEBUG in libraries\MySensors\MyConfig.h also.
-To-do:
+ *
-Special commands : clear or set EEPROM Values, Send REBOOT and Receive reboot for MyMQTT itself.
+ *	MQTT_FIRST_SENSORID is for 'DHCP' server in MyMQTT. You may limit the ID's with FIRST and LAST definition.
-Be able to send ACK so client returns the data being sent.
+ *	If you want your manually configured below 20 set MQTT_FIRST_SENSORID to 20.
-... Please come with ideas!
+ *	To disable: set MQTT_FIRST_SENSORID to 255.
-What to do with publish messages.
+ *
-
+ *	MQTT_BROKER_PREFIX is the leading prefix for your nodes. This can be only one char if like.
-Test in more MQTT clients, So far tested in openhab and MyMQTT for Android (Not my creation)
+ *
- http://www.openhab.org/
+ *	MQTT_SEND_SUBSCRIPTION is if you want the MyMQTT to send a empty payload message to your nodes.
- https://play.google.com/store/apps/details?id=at.tripwire.mqtt.client&hl=en
+ *	This can be useful if you want to send latest state back to the MQTT client. Just check if incoming
-... Please notify me if you use this broker with other software.
+ *	message has any length or not.
-
+ *	Example: if (msg.type==V_LIGHT && strlen(msg.getString())>0) otherwise the code might do strange things.
-
+ *
-* How to set-up Openhab and MQTTGateway:
+ * (*) Address-layout is : [MQTT_BROKER_PREFIX]/[NodeID]/[SensorID]/V_[SensorType]
-http://forum.mysensors.org/topic/303/mqtt-broker-gateway
+ *	NodeID and SensorID is uint8 (0-255) number.
-
+ *	Last segment is translation of the sensor type, look inside MyMQTT.cpp for the definitions.
-*/
+ *	User can change this to their needs. We have also left some space for custom types.
 *
 * Special: (sensor 255 reserved for special commands)
 * You can receive a node sketch name with MyMQTT/20/255/V_Sketch_name (or version with _version)
 *
 * To-do:
 * Special commands : clear or set EEPROM Values, Send REBOOT and Receive reboot for MyMQTT itself.
 * Be able to send ACK so client returns the data being sent.
 * ... Please come with ideas!
 * What to do with publish messages.
 *
 * Test in more MQTT clients, So far tested in openhab and MyMQTT for Android (Not my creation)
 * - http://www.openhab.org/
 * - https://play.google.com/store/apps/details?id=at.tripwire.mqtt.client&hl=en
 * ... Please notify me if you use this broker with other software.
 * 
 *  How to set-up Openhab and MQTTGateway:
 * http://forum.mysensors.org/topic/303/mqtt-broker-gateway
 */
 #include <DigitalIO.h>
 #include <SPI.h>
@@ -1,3 +1,32 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Henrik Ekblad
 * 
 * DESCRIPTION
 * Motion Sensor example using HC-SR501 
 * http://www.mysensors.org/build/motion
 *
 */
 #include <MySensor.h>  
 #include <SPI.h>
@@ -1,9 +1,36 @@
-// Default sensor sketch for MySensor Micro module
+/**
-// Act as a temperature / humidity sensor by default.
+ * The MySensors Arduino library handles the wireless radio link and protocol
-//
+ * between your home built sensors/actuators and HA controller of choice.
-// If A0 is held low while powering on, it will enter testmode, which verifies all on-board peripherals
+ * The sensors forms a self healing radio network with optional repeaters. Each
-// 
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
-// Battery voltage is repported as child sensorId 199, as well as battery percentage
+ * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Thomas Bowman Mørch
 * 
 * DESCRIPTION
 * Default sensor sketch for MySensor Sensebender Micro module
 * Act as a temperature / humidity sensor by default.
 *
 * If A0 is held low while powering on, it will enter testmode, which verifies all on-board peripherals
 * 
 * Battery voltage is repported as child sensorId 199, as well as battery percentage
 *
 */
 #include <MySensor.h>
@@ -1,3 +1,32 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Henrik Ekblad
 * 
 * DESCRIPTION
 * Pressure sensor example using BMP085 module  
 * http://www.mysensors.org/build/pressure
 *
 */
 #include <SPI.h>
 #include <MySensor.h>  
 #include <Wire.h>
@@ -1,4 +1,27 @@
-/*
+/**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Henrik Ekblad
 * 
 * DESCRIPTION
 * This sketch demonstrates how to use InterruptChain to receive and
 * decode remote switches (old and new) and remote sensors.
 *
@@ -15,7 +38,6 @@
 * Setup:
 * - connect a 433MHz receiver on digital pin 2.
 *
 *
 * MySensor note: This example has not yet been adopted but can be used as an example
 * of receiving 433Mhz stuff. 
 * 
@@ -1,26 +1,47 @@
-/* 
+/**
-  RFID Lock sensor/actuator
+ * The MySensors Arduino library handles the wireless radio link and protocol
-  
+ * between your home built sensors/actuators and HA controller of choice.
-  Henrik Ekblad <henrik.ekblad@mysensors.org>
+ * The sensors forms a self healing radio network with optional repeaters. Each
-
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
-  Use RFID tag to lock/unlock a door or trigger a scene on your controller.
+ * network topology allowing messages to be routed to nodes.
-  This example sketch allows you to add an optional relay or solenoid 
+ *
-  which can be activated/opened by RFID or controller.  
+ * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
-
+ * Copyright (C) 2013-2015 Sensnology AB
-  Use the I2C wiring option for your RFID module and connect to the following Arduino pins.
+ * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
-  
+ *
-  RFID       Arduino
+ * Documentation: http://www.mysensors.org
-  -----      -------
+ * Support Forum: http://forum.mysensors.org
-  GND   ->   GND
+ *
-  VCC   ->   +5V
+ * This program is free software; you can redistribute it and/or
-  SCL   ->   A5
+ * modify it under the terms of the GNU General Public License
-  SDA   ->   A4
+ * version 2 as published by the Free Software Foundation.
-  
+ *
-  Use normal wiring for NRF24L01 radio
+ *******************************
-  
+ *
-  Attach a optional relay or solonoid lock to pin 4
+ * REVISION HISTORY
-  
+ * Version 1.0 - Henrik Ekblad
-*/
+ * 
 * DESCRIPTION
 * RFID Lock sensor/actuator
 * 
 * Use RFID tag to lock/unlock a door or trigger a scene on your controller.
 * This example sketch allows you to add an optional relay or solenoid 
 * which can be activated/opened by RFID or controller.  
 *
 * Use the I2C wiring option for your RFID module and connect to the following Arduino pins.
 * 
 * RFID       Arduino
 * -----      -------
 * GND   ->   GND
 * VCC   ->   +5V
 * SCL   ->   A5
 * SDA   ->   A4
 * 
 * Use normal wiring for NRF24L01 radio
 * 
 * Attach a optional relay or solonoid lock to pin 4
 * http://www.mysensors.org/build/rfid 
 */
 #include <MySensor.h>  
 #include <SPI.h>
@@ -1,18 +1,43 @@
-
+/**
-// Example sketch showing how to request time from controller which is stored in RTC module
+ * The MySensors Arduino library handles the wireless radio link and protocol
-// The time and temperature (DS3231/DS3232) is shown on an attached Crystal LCD display
+ * between your home built sensors/actuators and HA controller of choice.
-// 
+ * The sensors forms a self healing radio network with optional repeaters. Each
-// Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
-// Inspired by Gregl
+ * network topology allowing messages to be routed to nodes.
-
+ *
-// Wiring (radio wiring on www.mysensors.org)
+ * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
-// ------------------------------------
+ * Copyright (C) 2013-2015 Sensnology AB
-// Arduino   RTC-Module     I2C Display 
+ * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
-// ------------------------------------
+ *
-// GND       GND            GND
+ * Documentation: http://www.mysensors.org
-// +5V       VCC            VCC
+ * Support Forum: http://forum.mysensors.org
-// A4        SDA            SDA
+ *
-// A5        SCL            SCL
+ * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Henrik Ekblad
 * 
 * DESCRIPTION
 * Example sketch showing how to request time from controller which is stored in RTC module
 * The time and temperature (DS3231/DS3232) is shown on an attached Crystal LCD display
 * 
 *
 * Wiring (radio wiring on www.mysensors.org)
 * ------------------------------------
 * Arduino   RTC-Module     I2C Display 
 * ------------------------------------
 * GND       GND            GND
 * +5V       VCC            VCC
 * A4        SDA            SDA
 * A5        SCL            SCL
 *
 * http://www.mysensors.org/build/display
 *
 */
 #include <SPI.h>
@@ -1,5 +1,31 @@
-// Example sketch showing how to control physical relays. 
+/**
-// This example will remember relay state even after power failure.
+ * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Henrik Ekblad
 * 
 * DESCRIPTION
 * Example sketch showing how to control physical relays. 
 * This example will remember relay state after power failure.
 * http://www.mysensors.org/build/relay
 */ 
 #include <MySigningNone.h>
 #include <MyTransportNRF24.h>
@@ -1,7 +1,33 @@
-// Example sketch för a "light switch" where you can control light or something 
+/**
-// else from both vera and a local physical button (connected between digital
+ * The MySensors Arduino library handles the wireless radio link and protocol
-// pin 3 and GND).
+ * between your home built sensors/actuators and HA controller of choice.
-// This node also works as a repeader for other nodes
+ * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Henrik Ekblad
 * 
 * DESCRIPTION
 * Example sketch for a "light switch" where you can control light or something 
 * else from both HA controller and a local physical button 
 * (connected between digital pin 3 and GND).
 * This node also works as a repeader for other nodes
 * http://www.mysensors.org/build/relay
 */ 
 #include <MySensor.h>
 #include <SPI.h>
@@ -1,7 +1,32 @@
-// Example sketch showing how to create a node thay repeates messages
+/**
-// from nodes far from gateway back to gateway. 
+ * The MySensors Arduino library handles the wireless radio link and protocol
-// It is important that nodes that has enabled repeater mode calls  
+ * between your home built sensors/actuators and HA controller of choice.
-// gw.preocess() frequently. This node should never sleep. 
+ * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Henrik Ekblad
 * 
 * DESCRIPTION
 * Example sketch showing how to create a node thay repeates messages
 * from nodes far from gateway back to gateway. 
 * It is important that nodes that has enabled repeater mode calls  
 * gw.process() frequently. Repeaters should never sleep. 
 */
 #include <MySensor.h>
 #include <SPI.h>
@@ -1,28 +1,54 @@
-/* Secret Knock Sensor
+/**
-
+ * The MySensors Arduino library handles the wireless radio link and protocol
-   See original instructions here (note: The MySensors adopted code might differ in wiring. The instructions below is correct):
+ * between your home built sensors/actuators and HA controller of choice.
-   https://learn.adafruit.com/secret-knock-activated-drawer-lock/ 
+ * The sensors forms a self healing radio network with optional repeaters. Each
-   Version 13.10.31  Built with Arduino IDE 1.0.5
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
-   
+ * network topology allowing messages to be routed to nodes.
-   By Steve Hoefer http://grathio.com
+ *
-   Adapted to MySensors by Henrik Ekblad
+ * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
-   
+ * Copyright (C) 2013-2015 Sensnology AB
-   Licensed under Creative Commons Attribution-Noncommercial-Share Alike 3.0
+ * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
-   http://creativecommons.org/licenses/by-nc-sa/3.0/us/
+ *
-   (In short: Do what you want, as long as you credit me, don't relicense it, and don't sell it or use it in anything you sell without contacting me.)
+ * Documentation: http://www.mysensors.org
-   
+ * Support Forum: http://forum.mysensors.org
-   ------Wiring------
+ *
-   Pin 0: Program button used for recording a new Knock (connect Pin0 -> button -> GND) 
+ * This program is free software; you can redistribute it and/or
-   Pin 1: Optional: Connect LED here (remember resisor in series)
+ * modify it under the terms of the GNU General Public License
-   Pin 2: Optional: Piezo element (for beeps). 
+ * version 2 as published by the Free Software Foundation.
-   Pin 5: A sound sensor (digital output) for sensing knocks. See MySensors purchase guide. I used this: http://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=2&pub=5575069610&toolid=10001&campid=5337433187&customid=&icep_item=200941260251&ipn=psmain&icep_vectorid=229466&kwid=902099&mtid=824&kw=lg 
+ *
-   Pin 4: Connects to either 1. Relay which open door or lock or 
+ *******************************
-                             2. transistor that opens a solenoid lock when HIGH (see adafruit guide for this option).
+ *
-                                 
+ * REVISION HISTORY
- 
+ * Version 1.0 - Henrik Ekblad
-   Connect radio according as usual(you can skip IRQ pin) 
+ * 
-   http://www.mysensors.org/build/connect_radio 
+ * DESCRIPTION
-*/
+ *
 * Secret Knock Sensor
 * http://www.mysensors.org/build/knock
 *
 * See original instructions here (note: The MySensors adopted code might differ in wiring. The instructions below is correct):
 * https://learn.adafruit.com/secret-knock-activated-drawer-lock/ 
 * Version 13.10.31  Built with Arduino IDE 1.0.5
 * 
 * By Steve Hoefer http://grathio.com
 * Adapted to MySensors by Henrik Ekblad
 * 
 * Licensed under Creative Commons Attribution-Noncommercial-Share Alike 3.0
 * http://creativecommons.org/licenses/by-nc-sa/3.0/us/
 * (In short: Do what you want, as long as you credit me, don't relicense it, and don't sell it or use it in anything you sell without contacting me.)
 * 
 * ------Wiring------
 * Pin 0: Program button used for recording a new Knock (connect Pin0 -> button -> GND) 
 * Pin 1: Optional: Connect LED here (remember resisor in series)
 * Pin 2: Optional: Piezo element (for beeps). 
 * Pin 5: A sound sensor (digital output) for sensing knocks. See MySensors purchase guide. I used this: http://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=2&pub=5575069610&toolid=10001&campid=5337433187&customid=&icep_item=200941260251&ipn=psmain&icep_vectorid=229466&kwid=902099&mtid=824&kw=lg 
 * Pin 4: Connects to either 1. Relay which open door or lock or 
 *                           2. transistor that opens a solenoid lock when HIGH (see adafruit guide for this option).
 *                               
 *
 * Connect radio according as usual(you can skip IRQ pin) 
 * http://www.mysensors.org/build/connect_radio 
 */
 #include <MySensor.h>  
 #include <SPI.h>
@@ -1,5 +1,31 @@
-// Example sketch showing how to securely control locks. 
+/**
-// This example will remember lock state even after power failure.
+ * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Patrick "Anticimex" Fallberg <patrick@fallberg.net>
 * 
 * DESCRIPTION
 * Example sketch showing how to securely control locks. 
 * This example will remember lock state even after power failure.
 */
 #define USE_SOFTWARE_ATSHA // Disable to use ATSHA204A circuit
@@ -1,3 +1,23 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 */
 #ifndef __GATEWAYUTIL_H__
 #define __GATEWAYUTIL_H__
@@ -133,7 +153,7 @@ void parseAndSend(MySensor gw, char *commandBuffer) {
 }
 void setInclusionMode(boolean newMode) {
-  if (newMode != inclusionMode)
+  if (newMode != inclusionMode) {
    inclusionMode = newMode;
    // Send back mode change on serial line to ack command
    serial(PSTR("0;0;%d;0;%d;%d\n"), C_INTERNAL, I_INCLUSION_MODE, inclusionMode?1:0);
@@ -141,6 +161,7 @@ void setInclusionMode(boolean newMode) {
    if (inclusionMode) {
      inclusionStartTime = millis();
    }
  }
 }
@@ -193,3 +214,4 @@ void errBlink(uint8_t cnt) {
 #endif // ARDUINO
 #endif 
@@ -1,10 +1,23 @@
-  /*
+/**
- * Copyright (C) 2013-2014 Henrik Ekblad <henrik.ekblad@gmail.com>
+ * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * DESCRIPTION
 * The ArduinoGateway prints data received from sensors on the serial link. 
 * The gateway accepts input on seral which will be sent out on radio network.
@@ -19,6 +32,7 @@
 * - RX (green) - blink fast on radio message recieved. In inclusion mode will blink fast only on presentation recieved
 * - TX (yellow) - blink fast on radio message transmitted. In inclusion mode will blink slowly
 * - ERR (red) - fast blink on error during transmission error or recieve crc error 
 * 
 */
 #define NO_PORTB_PINCHANGES  
@@ -139,3 +153,4 @@ void serialEvent() {
@@ -1,9 +1,35 @@
-// Example showing how to create an atuator for a servo.
+/**
-// Connect red to +5V, Black or brown to GND and the last cable to Digital pin 3.
+ * The MySensors Arduino library handles the wireless radio link and protocol
-// The servo consumes much power and should probably have its own powersource.'
+ * between your home built sensors/actuators and HA controller of choice.
-// The arduino might spontanally restart if too much power is used (happend
+ * The sensors forms a self healing radio network with optional repeaters. Each
-// to me when servo tried to pass the extreme positions = full load).
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
-// Contribution by: Derek Macias
+ * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Henrik Ekblad
 * Contribution by: Derek Macias
 * 
 * DESCRIPTION
 * Example showing how to create an atuator for a servo.
 * Connect red to +5V, Black or brown to GND and the last cable to Digital pin 3.
 * The servo consumes much power and should probably have its own powersource.'
 * The arduino might spontanally restart if too much power is used (happend
 * to me when servo tried to pass the extreme positions = full load).
 * http://www.mysensors.org/build/servo
 */
 #include <MySensor.h>
@@ -1,24 +1,47 @@
-/* SHA204 personalization sketch
+/**
-   by: Patrick Fallberg
+ * The MySensors Arduino library handles the wireless radio link and protocol
-   date: January 10, 2015
+ * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Patrick Fallberg, January 10, 2015
 * 
 * DESCRIPTION
 * SHA204 personalization sketch
 *
 * This sketch will write factory default settings to the configuration zone
 * and then lock it.
 * It will then either
 * a. Generate a random value to use as a key which will be stored in
 * slot 0. The key is printed on UART (115200) in clear text for the user to be
 * able to use it as a user-supplied key in other personalization executions
 * where the same key is needed.
 * b. Use a user-supplied value to use as a key which will be stored in
 * slot 0.
 * Finally it will lock the data zone.
 *
 * By default, no locking is performed. User have to manually enable the flags that
 * turn on the locking. Furthermore, user have to send a SPACE character on serial
 * console when prompted to do any locking. On boards that does not provide UART
 * input it is possible to configure the sketch to skip this confirmation.
 * Default settings use ATSHA204 on pin 17 (A3).
 */
   This sketch will write factory default settings to the configuration zone
   and then lock it.
   It will then either
   a. Generate a random value to use as a key which will be stored in
   slot 0. The key is printed on UART (115200) in clear text for the user to be
   able to use it as a user-supplied key in other personalization executions
   where the same key is needed.
   b. Use a user-supplied value to use as a key which will be stored in
   slot 0.
   Finally it will lock the data zone.
   By default, no locking is performed. User have to manually enable the flags that
   turn on the locking. Furthermore, user have to send a SPACE character on serial
   console when prompted to do any locking. On boards that does not provide UART
   input it is possible to configure the sketch to skip this confirmation.
   Default settings use ATSHA204 on pin 17 (A3).
 */
 #include <sha204_library.h>
 #include <sha204_lib_return_codes.h>
@@ -1,3 +1,31 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Henrik Ekblad
 * 
 * DESCRIPTION
 * Example sketch sending soil moisture alarm to controller 
 * http://www.mysensors.org/build/moisture
 */
 #include <SPI.h>
 #include <MySensor.h>  
@@ -1,6 +1,30 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Henrik Ekblad
 * 
 * DESCRIPTION
 * Example sketch showing how to request time from controller. 
 */
 // Example sketch showing how to request time from controller. 
 // Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 #include <SPI.h>
 #include <MySensor.h>  
@@ -1,5 +1,28 @@
-
+/**
-/*
+ * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Henrik Ekblad
 * 
 * DESCRIPTION
 * http://www.mysensors.org/build/scene_controller
 * Touch Display Scene Controller build using a touch enabled tft display
 * attached to a ATMega 2560. This example fetches time from controller and sends
 * in scene commands to the controller. 
@@ -1,22 +1,43 @@
 /**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - epierre
 * Contribution: bulldoglowell, gizmocuz
 * 
 * DESCRIPTION
 * Arduino UVM-30A
 * Index table taken from: http://www.elecrow.com/sensors-c-111/environment-c-111_112/uv-sensor-moduleuvm30a-p-716.html
 * Because this table is pretty lineair, we can calculate a UVI with one decimal 
 *
 * Connect sensor:
 *
 *   +   >>> 5V
 *   -   >>> GND
 *   out >>> A0     
 * 
 * License: Attribution-NonCommercial-ShareAlike 3.0 Unported (CC BY-NC-SA 3.0)
 */
 #include <SPI.h>
 #include <MySensor.h>  
 /*
  Arduino UVM-30A
  connect the sensor as follows :
  +   >>> 5V
  -   >>> GND
  out >>> A0     
  Contribution: epierre, bulldoglowell, gizmocuz
  Index table taken from: http://www.elecrow.com/sensors-c-111/environment-c-111_112/uv-sensor-moduleuvm30a-p-716.html
  Because this table is pretty lineair, we can calculate a UVI with one decimal 
  License: Attribution-NonCommercial-ShareAlike 3.0 Unported (CC BY-NC-SA 3.0)
 */
 #include <MySensor.h>  
 #include <SPI.h>
@@ -1,13 +1,37 @@
-//
+/**
-// Use this sensor to measure volume and flow of your house watermeter.
+ * The MySensors Arduino library handles the wireless radio link and protocol
-// You need to set the correct pulsefactor of your meter (pulses per m3).
+ * between your home built sensors/actuators and HA controller of choice.
-// The sensor starts by fetching current volume reading from gateway (VAR 1).
+ * The sensors forms a self healing radio network with optional repeaters. Each
-// Reports both volume and flow back to gateway.
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
-//
+ * network topology allowing messages to be routed to nodes.
-// Unfortunately millis() won't increment when the Arduino is in 
+ *
-// sleepmode. So we cannot make this sensor sleep if we also want  
+ * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
-// to calculate/report flow.
+ * Copyright (C) 2013-2015 Sensnology AB
-//
+ * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Henrik Ekblad
 * 
 * DESCRIPTION
 * Use this sensor to measure volume and flow of your house watermeter.
 * You need to set the correct pulsefactor of your meter (pulses per m3).
 * The sensor starts by fetching current volume reading from gateway (VAR 1).
 * Reports both volume and flow back to gateway.
 *
 * Unfortunately millis() won't increment when the Arduino is in 
 * sleepmode. So we cannot make this sensor sleep if we also want  
 * to calculate/report flow.
 * http://www.mysensors.org/build/pulse_water
 */
 #include <SPI.h>
 #include <MySensor.h>