diff --git a/SerialGateway/SerialGateway.ino b/SerialGateway/SerialGateway.ino index a78a2de..83e9715 100644 --- a/SerialGateway/SerialGateway.ino +++ b/SerialGateway/SerialGateway.ino @@ -1,4 +1,4 @@ -/* + /* * Copyright (C) 2013 Henrik Ekblad * * This program is free software; you can redistribute it and/or @@ -22,8 +22,6 @@ */ #include -#include -#include #include #include @@ -31,7 +29,7 @@ #define INCLUSION_MODE_PIN 3 // Digital pin used for inclusion mode button -MyGateway gw(9, 10, INCLUSION_MODE_TIME, INCLUSION_MODE_PIN, 6, 5, 4); +MyGateway gw(DEFAULT_CE_PIN, DEFAULT_CS_PIN, INCLUSION_MODE_TIME, INCLUSION_MODE_PIN, 6, 5, 4); char inputString[MAX_RECEIVE_LENGTH] = ""; // A string to hold incoming commands from serial/ethernet interface int inputPos = 0; @@ -40,34 +38,15 @@ boolean commandComplete = false; // whether the string is complete void setup() { gw.begin(); - - // C++ classes and interrupts really sucks. Need to attach interrupt - // outside thw Gateway class due to language shortcomings! Gah! - - if (gw.isLedMode()) { - // Add led timer interrupt - MsTimer2::set(300, ledTimersInterrupt); - MsTimer2::start(); - // Add interrupt for inclustion button to pin - PCintPort::attachInterrupt(INCLUSION_MODE_PIN, startInclusionInterrupt, RISING); - } } void loop() { gw.processRadioMessage(); checkSerialInput(); - } -void startInclusionInterrupt() { - gw.startInclusionInterrupt(); -} - -void ledTimersInterrupt() { - gw.ledTimersInterrupt(); -} void checkSerialInput() { if (commandComplete) { diff --git a/libraries/MsTimer2/examples/FlashLed/FlashLed.pde b/libraries/MsTimer2/examples/FlashLed/FlashLed.pde deleted file mode 100644 index 4d04496..0000000 --- a/libraries/MsTimer2/examples/FlashLed/FlashLed.pde +++ /dev/null @@ -1,42 +0,0 @@ -char dummyvar; // to get Arduinoi IDE to include core headers properly - -/* - MsTimer2 is a small and very easy to use library to interface Timer2 with - humans. It's called MsTimer2 because it "hardcodes" a resolution of 1 - millisecond on timer2 - For Details see: http://www.arduino.cc/playground/Main/MsTimer2 -*/ -#include - -// Switch on LED on and off each half second - -#if defined(ARDUINO) && ARDUINO >= 100 -const int led_pin = LED_BUILTIN; // 1.0 built in LED pin var -#else -#if defined(CORE_LED0_PIN) -const int led_pin = CORE_LED0_PIN; // 3rd party LED pin define -#else -const int led_pin = 13; // default to pin 13 -#endif -#endif - - -void flash() -{ - static boolean output = HIGH; - - digitalWrite(led_pin, output); - output = !output; -} - -void setup() -{ - pinMode(led_pin, OUTPUT); - - MsTimer2::set(500, flash); // 500ms period - MsTimer2::start(); -} - -void loop() -{ -} diff --git a/libraries/MsTimer2/keywords.txt b/libraries/MsTimer2/keywords.txt deleted file mode 100644 index 8b4fff7..0000000 --- a/libraries/MsTimer2/keywords.txt +++ /dev/null @@ -1,4 +0,0 @@ -MsTimer2 KEYWORD1 -set KEYWORD2 -start KEYWORD2 -stop KEYWORD2 diff --git a/libraries/MySensors/MyConfig.h b/libraries/MySensors/MyConfig.h index 9cb8cb6..aedf051 100644 --- a/libraries/MySensors/MyConfig.h +++ b/libraries/MySensors/MyConfig.h @@ -10,6 +10,10 @@ #define RF24_PA_LEVEL_GW RF24_PA_LEVEL //Gateway PA Level, defaults to Sensor net PA Level. Tune here if using an amplified nRF2401+ in your gateway. #define BASE_RADIO_ID ((uint64_t)0xA8A8E1FC00LL) // This is also act as base value for sensor nodeId addresses. Change this (or channel) if you have more than one sensor network. +// MySensors online examples defaults +#define DEFAULT_CE_PIN 9 +#define DEFAULT_CS_PIN 10 + /*** * Enable/Disable debug logging diff --git a/libraries/MySensors/MyGateway.cpp b/libraries/MySensors/MyGateway.cpp index b39e0a8..c8848cf 100644 --- a/libraries/MySensors/MyGateway.cpp +++ b/libraries/MySensors/MyGateway.cpp @@ -10,15 +10,21 @@ */ #include "MyGateway.h" +#include "utility/MsTimer2.h" +#include "utility/PinChangeInt.h" -MyGateway::MyGateway(uint8_t _cepin, uint8_t _cspin, uint8_t _inclusion_time) : MySensor(_cepin, _cspin) { - ledMode = false; - inclusionTime = _inclusion_time; -} +uint8_t pinRx; +uint8_t pinTx; +uint8_t pinEr; +boolean buttonTriggeredInclusion; +volatile uint8_t countRx; +volatile uint8_t countTx; +volatile uint8_t countErr; +boolean inclusionMode; // Keeps track on inclusion mode + MyGateway::MyGateway(uint8_t _cepin, uint8_t _cspin, uint8_t _inclusion_time, uint8_t _inclusion_pin, uint8_t _rx, uint8_t _tx, uint8_t _er) : MySensor(_cepin, _cspin) { - ledMode = true; pinInclusion = _inclusion_pin; inclusionTime = _inclusion_time; pinRx = _rx; @@ -26,6 +32,7 @@ MyGateway::MyGateway(uint8_t _cepin, uint8_t _cspin, uint8_t _inclusion_time, ui pinEr = _er; } + void MyGateway::begin(rf24_pa_dbm_e paLevel, uint8_t channel, rf24_datarate_e dataRate, void (*inDataCallback)(char *)) { Serial.begin(BAUD_RATE); repeaterMode = true; @@ -47,25 +54,23 @@ void MyGateway::begin(rf24_pa_dbm_e paLevel, uint8_t channel, rf24_datarate_e da countTx = 0; countErr = 0; - if (ledMode) { - // Setup led pins - pinMode(pinRx, OUTPUT); - pinMode(pinTx, OUTPUT); - pinMode(pinEr, OUTPUT); - digitalWrite(pinRx, LOW); - digitalWrite(pinTx, LOW); - digitalWrite(pinEr, LOW); + // Setup led pins + pinMode(pinRx, OUTPUT); + pinMode(pinTx, OUTPUT); + pinMode(pinEr, OUTPUT); + digitalWrite(pinRx, LOW); + digitalWrite(pinTx, LOW); + digitalWrite(pinEr, LOW); - // Setup digital in that triggers inclusion mode - pinMode(pinInclusion, INPUT); - digitalWrite(pinInclusion, HIGH); + // Setup digital in that triggers inclusion mode + pinMode(pinInclusion, INPUT); + digitalWrite(pinInclusion, HIGH); - // Set initial state of leds - digitalWrite(pinRx, HIGH); - digitalWrite(pinTx, HIGH); - digitalWrite(pinEr, HIGH); + // Set initial state of leds + digitalWrite(pinRx, HIGH); + digitalWrite(pinTx, HIGH); + digitalWrite(pinEr, HIGH); - } // Start up the radio library setupRadio(paLevel, channel, dataRate); @@ -73,21 +78,24 @@ void MyGateway::begin(rf24_pa_dbm_e paLevel, uint8_t channel, rf24_datarate_e da RF24::openReadingPipe(CURRENT_NODE_PIPE, BASE_RADIO_ID); RF24::startListening(); + // Add led timer interrupt + MsTimer2::set(300, ledTimersInterrupt); + MsTimer2::start(); + + // Add interrupt for inclusion button to pin + PCintPort::attachInterrupt(pinInclusion, startInclusionInterrupt, RISING); + // Send startup log message on serial - serial(PSTR("0;0;%d;0;%d;Arduino startup complete.\n"), C_INTERNAL, I_LOG_MESSAGE); - + serial(PSTR("0;0;%d;0;%d;Gateway startup complete.\n"), C_INTERNAL, I_GATEWAY_READY); } -boolean MyGateway::isLedMode() { - return ledMode; -} - -void MyGateway::startInclusionInterrupt() { +void startInclusionInterrupt() { buttonTriggeredInclusion = true; } + void MyGateway::checkButtonTriggeredInclusion() { if (buttonTriggeredInclusion) { // Ok, someone pressed the inclusion button on the gateway @@ -243,7 +251,7 @@ void MyGateway::serial(MyMessage &msg) { } -void MyGateway::ledTimersInterrupt() { +void ledTimersInterrupt() { if(countRx && countRx != 255) { // switch led on digitalWrite(pinRx, LOW); diff --git a/libraries/MySensors/MyGateway.h b/libraries/MySensors/MyGateway.h index e527bc3..21a93d6 100644 --- a/libraries/MySensors/MyGateway.h +++ b/libraries/MySensors/MyGateway.h @@ -14,8 +14,8 @@ #include "MySensor.h" -#define MAX_RECEIVE_LENGTH 100 // Max buffersize needed for messages coming from vera -#define MAX_SEND_LENGTH 120 // Max buffersize needed for messages coming from vera +#define MAX_RECEIVE_LENGTH 100 // Max buffersize needed for messages coming from controller +#define MAX_SEND_LENGTH 120 // Max buffersize needed for messages destined for controller class MyGateway : public MySensor { @@ -36,43 +36,27 @@ class MyGateway : public MySensor * @param _er Digital pin for error led * */ - MyGateway(uint8_t _cepin=9, uint8_t _cspin=10, uint8_t _inclusion_time = 1); - MyGateway(uint8_t _cepin, uint8_t _cspin, uint8_t _inclusion_time, uint8_t _inclusion_pin, uint8_t _rx, uint8_t _tx, uint8_t _er); + MyGateway(uint8_t _cepin=DEFAULT_CE_PIN, uint8_t _cspin=DEFAULT_CS_PIN, uint8_t _inclusion_time = 1, uint8_t _inclusion_pin = 3, uint8_t _rx=6, uint8_t _tx=5, uint8_t _er=4); /* Use this and pass a function that should be called when you want to process commands that arrive from radio network */ void begin(rf24_pa_dbm_e paLevel=RF24_PA_LEVEL_GW, uint8_t channel=RF24_CHANNEL, rf24_datarate_e dataRate=RF24_DATARATE, void (*dataCallback)(char *)=NULL); void processRadioMessage(); void parseAndSend(char *inputString); - boolean isLedMode(); - void ledTimersInterrupt(); - void startInclusionInterrupt(); private: char convBuf[MAX_PAYLOAD*2+1]; char serialBuffer[MAX_SEND_LENGTH]; // Buffer for building string when sending data to vera unsigned long inclusionStartTime; - boolean inclusionMode; // Keeps track on inclusion mode - boolean buttonTriggeredInclusion; - volatile uint8_t countRx; - volatile uint8_t countTx; - volatile uint8_t countErr; - boolean ledMode; boolean useWriteCallback; void (*dataCallback)(char *); - - uint8_t pinInclusion; uint8_t inclusionTime; - uint8_t pinRx; - uint8_t pinTx; - uint8_t pinEr; uint8_t h2i(char c); void serial(const char *fmt, ... ); void serial(MyMessage &msg); - void interruptStartInclusion(); void checkButtonTriggeredInclusion(); void setInclusionMode(boolean newMode); void checkInclusionFinished(); @@ -82,6 +66,7 @@ class MyGateway : public MySensor void errBlink(uint8_t cnt); }; - +void ledTimersInterrupt(); +void startInclusionInterrupt(); #endif diff --git a/libraries/MySensors/MyMessage.h b/libraries/MySensors/MyMessage.h index 729dacd..bc7a086 100644 --- a/libraries/MySensors/MyMessage.h +++ b/libraries/MySensors/MyMessage.h @@ -39,7 +39,7 @@ typedef enum { V_IMPEDANCE, V_ARMED, V_TRIPPED, V_WATT, V_KWH, V_SCENE_ON, V_SCENE_OFF, V_HEATER, V_HEATER_SW, V_LIGHT_LEVEL, V_VAR1, V_VAR2, V_VAR3, V_VAR4, V_VAR5, V_UP, V_DOWN, V_STOP, V_IR_SEND, V_IR_RECEIVE, V_FLOW, V_VOLUME, V_LOCK_STATUS, - V_DUST_LEVEL + V_DUST_LEVEL, V_VOLTAGE, V_CURRENT } data; // Type of internal messages (for internal messages) @@ -47,7 +47,7 @@ typedef enum { I_BATTERY_LEVEL, I_TIME, I_VERSION, I_ID_REQUEST, I_ID_RESPONSE, I_INCLUSION_MODE, I_CONFIG, I_FIND_PARENT, I_FIND_PARENT_RESPONSE, I_LOG_MESSAGE, I_CHILDREN, I_SKETCH_NAME, I_SKETCH_VERSION, - I_REBOOT + I_REBOOT, I_GATEWAY_READY } internal; // Type of sensor (for presentation message) diff --git a/libraries/MySensors/MySensor.h b/libraries/MySensors/MySensor.h index 45544ba..f6dbba1 100644 --- a/libraries/MySensors/MySensor.h +++ b/libraries/MySensors/MySensor.h @@ -88,10 +88,10 @@ class MySensor : public RF24 * * Creates a new instance of Sensor class. * - * @param _cepin The pin attached to RF24 Chip Enable on the RF module (defualt 9) + * @param _cepin The pin attached to RF24 Chip Enable on the RF module (default 9) * @param _cspin The pin attached to RF24 Chip Select (default 10) */ - MySensor(uint8_t _cepin=9, uint8_t _cspin=10); + MySensor(uint8_t _cepin=DEFAULT_CE_PIN, uint8_t _cspin=DEFAULT_CS_PIN); /** * Begin operation of the MySensors library diff --git a/libraries/MsTimer2/MsTimer2.cpp b/libraries/MySensors/utility/MsTimer2.cpp similarity index 100% rename from libraries/MsTimer2/MsTimer2.cpp rename to libraries/MySensors/utility/MsTimer2.cpp diff --git a/libraries/MsTimer2/MsTimer2.h b/libraries/MySensors/utility/MsTimer2.h similarity index 100% rename from libraries/MsTimer2/MsTimer2.h rename to libraries/MySensors/utility/MsTimer2.h diff --git a/libraries/PinChangeInt/PinChangeInt.h b/libraries/MySensors/utility/PinChangeInt.h similarity index 100% rename from libraries/PinChangeInt/PinChangeInt.h rename to libraries/MySensors/utility/PinChangeInt.h diff --git a/libraries/PinChangeInt/Examples/ByteBuffer/ByteBuffer.cpp b/libraries/PinChangeInt/Examples/ByteBuffer/ByteBuffer.cpp deleted file mode 100644 index db49dce..0000000 --- a/libraries/PinChangeInt/Examples/ByteBuffer/ByteBuffer.cpp +++ /dev/null @@ -1,272 +0,0 @@ -/* - ByteBuffer.cpp - A circular buffer implementation for Arduino - Created by Sigurdur Orn, July 19, 2010. - siggi@mit.edu - Updated by GreyGnome (aka Mike Schwager) Thu Feb 23 17:25:14 CST 2012 - added the putString() method and the fillError variable. - added the checkError() and resetError() methods. The checkError() method resets the fillError variable - to false as a side effect. - added the ByteBuffer(unsigned int buf_size) constructor. - added the init() method, and had the constructor call it automagically. - Also made the capacity, position, length, and fillError variables volatile, for safe use by interrupts. - */ - -#include "ByteBuffer.h" - -void ByteBuffer::init(){ - ByteBuffer::init(DEFAULTBUFSIZE); -} - -void ByteBuffer::init(unsigned int buf_length){ - data = (byte*)malloc(sizeof(byte)*buf_length); - capacity = buf_length; - position = 0; - length = 0; - fillError=false; -} - -void ByteBuffer::deAllocate(){ - free(data); -} - -void ByteBuffer::clear(){ - position = 0; - length = 0; -} - -void ByteBuffer::resetError(){ - fillError=false; -} - -boolean ByteBuffer::checkError(){ - /* - if (fillError) { - Serial.print("E: checkError: length "); - Serial.println(length, DEC); - } - */ - - boolean result=fillError; - fillError=false; - return(result); -} - -int ByteBuffer::getSize(){ - return length; -} - -int ByteBuffer::getCapacity(){ - return capacity; -} - -byte ByteBuffer::peek(unsigned int index){ - byte b = data[(position+index)%capacity]; - return b; -} - -uint8_t ByteBuffer::put(byte in){ - if(length < capacity){ - // save data byte at end of buffer - data[(position+length) % capacity] = in; - // increment the length - length++; - return 1; - } - // return failure - //Serial.print("E: put: "); - //Serial.println(length, DEC); - fillError=true; - return 0; -} - - -uint8_t ByteBuffer::putString(char *in){ - uint8_t count=0; - char *inString; - - inString=in; - uint8_t oldSREG = SREG; cli(); - while(length <= capacity){ - if (length == capacity) { - fillError=true; - return count; - } - // save data byte at end of buffer - data[(position+length) % capacity] = *inString; - // increment the length - length++; - inString++; - count++; - if (*inString == 0) { - if (count==0) fillError=true; // Serial.println("E: putString"); }; - SREG = oldSREG; // Restore register; reenables interrupts - return count; - } - } - SREG = oldSREG; // Restore register; reenables interrupts - return count; -} - -uint8_t ByteBuffer::putInFront(byte in){ - uint8_t oldSREG = SREG; cli(); - if(length < capacity){ - // save data byte at end of buffer - if( position == 0 ) - position = capacity-1; - else - position = (position-1)%capacity; - data[position] = in; - // increment the length - length++; - SREG = oldSREG; // Restore register; reenables interrupts - return 1; - } - // return failure - //Serial.println("E: putInFront"); - fillError=true; - SREG = oldSREG; // Restore register; reenables interrupts - return 0; -} - -byte ByteBuffer::get(){ - uint8_t oldSREG = SREG; cli(); - byte b = 0; - - if(length > 0){ - b = data[position]; - // move index down and decrement length - position = (position+1)%capacity; - length--; - } - SREG = oldSREG; // Restore register; reenables interrupts - return b; -} - -byte ByteBuffer::getFromBack(){ - byte b = 0; - if(length > 0){ - uint8_t oldSREG = SREG; cli(); - b = data[(position+length-1)%capacity]; - length--; - SREG = oldSREG; // Restore register; reenables interrupts - } - - return b; -} - -// -// Ints -// - -void ByteBuffer::putIntInFront(int in){ - byte *pointer = (byte *)∈ - putInFront(pointer[0]); - putInFront(pointer[1]); -} - -void ByteBuffer::putInt(int in){ - byte *pointer = (byte *)∈ - put(pointer[1]); - put(pointer[0]); -} - - -int ByteBuffer::getInt(){ - int ret; - byte *pointer = (byte *)&ret; - pointer[1] = get(); - pointer[0] = get(); - return ret; -} - -int ByteBuffer::getIntFromBack(){ - int ret; - byte *pointer = (byte *)&ret; - pointer[0] = getFromBack(); - pointer[1] = getFromBack(); - return ret; -} - -// -// Longs -// - -void ByteBuffer::putLongInFront(long in){ - byte *pointer = (byte *)∈ - putInFront(pointer[0]); - putInFront(pointer[1]); - putInFront(pointer[2]); - putInFront(pointer[3]); -} - -void ByteBuffer::putLong(long in){ - byte *pointer = (byte *)∈ - put(pointer[3]); - put(pointer[2]); - put(pointer[1]); - put(pointer[0]); -} - - -long ByteBuffer::getLong(){ - long ret; - byte *pointer = (byte *)&ret; - pointer[3] = get(); - pointer[2] = get(); - pointer[1] = get(); - pointer[0] = get(); - return ret; -} - -long ByteBuffer::getLongFromBack(){ - long ret; - byte *pointer = (byte *)&ret; - pointer[0] = getFromBack(); - pointer[1] = getFromBack(); - pointer[2] = getFromBack(); - pointer[3] = getFromBack(); - return ret; -} - - -// -// Floats -// - -void ByteBuffer::putFloatInFront(float in){ - byte *pointer = (byte *)∈ - putInFront(pointer[0]); - putInFront(pointer[1]); - putInFront(pointer[2]); - putInFront(pointer[3]); -} - -void ByteBuffer::putFloat(float in){ - byte *pointer = (byte *)∈ - put(pointer[3]); - put(pointer[2]); - put(pointer[1]); - put(pointer[0]); -} - -float ByteBuffer::getFloat(){ - float ret; - byte *pointer = (byte *)&ret; - pointer[3] = get(); - pointer[2] = get(); - pointer[1] = get(); - pointer[0] = get(); - return ret; -} - -float ByteBuffer::getFloatFromBack(){ - float ret; - byte *pointer = (byte *)&ret; - pointer[0] = getFromBack(); - pointer[1] = getFromBack(); - pointer[2] = getFromBack(); - pointer[3] = getFromBack(); - return ret; -} - - diff --git a/libraries/PinChangeInt/Examples/ByteBuffer/ByteBuffer.h b/libraries/PinChangeInt/Examples/ByteBuffer/ByteBuffer.h deleted file mode 100644 index 8916e58..0000000 --- a/libraries/PinChangeInt/Examples/ByteBuffer/ByteBuffer.h +++ /dev/null @@ -1,104 +0,0 @@ -/* - ByteBuffer.h - A circular buffer implementation for Arduino - Created by Sigurdur Orn, July 19, 2010. siggi@mit.edu - Updated by GreyGnome (aka Mike Schwager) Thu Feb 23 17:25:14 CST 2012 - added the putString() method and the fillError variable. - added the checkError() and resetError() methods. The checkError() method resets the fillError variable - to false as a side effect. - added the ByteBuffer(unsigned int buf_size) constructor. - added the init() method, and had the constructor call it automagically. - protected certain sections of the code with cli()/sei() calls, for safe use by interrupts. - Also made the capacity, position, length, and fillError variables volatile, for safe use by interrupts. - */ - -#ifndef ByteBuffer_h -#define ByteBuffer_h - -#if defined(ARDUINO) && ARDUINO >= 100 - #include -#else - #include -#endif -//#include - -#define DEFAULTBUFSIZE 32 -class ByteBuffer -{ -public: - ByteBuffer() { - init(); - }; - ByteBuffer(unsigned int buf_size) { - init(buf_size); - }; - - // This method initializes the datastore of the buffer to a certain size. - void init(unsigned int buf_size); - - // This method initializes the datastore of the buffer to the default size. - void init(); - - // This method resets the buffer into an original state (with no data) - void clear(); - - // This method resets the fillError variable to false. - void resetError(); - - // This method tells you if your buffer overflowed at some time since the last - // check. The error state will be reset to false. - boolean checkError(); - - // This releases resources for this buffer, after this has been called the buffer should NOT be used - void deAllocate(); - - // Returns how much space is used in the buffer - int getSize(); - - // Returns the maximum capacity of the buffer - int getCapacity(); - - // This method returns the byte that is located at index in the buffer but doesn't modify the buffer like the get methods (doesn't remove the retured byte from the buffer) - byte peek(unsigned int index); - - // - // Put methods, either a regular put in back or put in front - // - uint8_t putInFront(byte in); - uint8_t put(byte in); - uint8_t putString(char *in); - - void putIntInFront(int in); - void putInt(int in); - - void putLongInFront(long in); - void putLong(long in); - - void putFloatInFront(float in); - void putFloat(float in); - - // - // Get methods, either a regular get from front or from back - // - byte get(); - byte getFromBack(); - - int getInt(); - int getIntFromBack(); - - long getLong(); - long getLongFromBack(); - - float getFloat(); - float getFloatFromBack(); - -private: - byte* data; - - volatile unsigned int capacity; - volatile unsigned int position; - volatile unsigned int length; - volatile boolean fillError; -}; - -#endif - diff --git a/libraries/PinChangeInt/Examples/GetPSTR/GetPSTR.h b/libraries/PinChangeInt/Examples/GetPSTR/GetPSTR.h deleted file mode 100644 index aaab06a..0000000 --- a/libraries/PinChangeInt/Examples/GetPSTR/GetPSTR.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef INCLUDE_GETPSTR -#define INCLUDE_GETPSTR - -#if defined(ARDUINO) && ARDUINO >= 100 - #include -#else - #include "pins_arduino.h" - #include "WProgram.h" - #include "wiring.h" -#endif - -#define getPSTR(s) pgmStrToRAM(PSTR(s)) - -char *_pstr_to_print; -char *pgmStrToRAM(PROGMEM char *theString) { - free(_pstr_to_print); - _pstr_to_print=(char *) malloc(strlen_P(theString)); - strcpy_P(_pstr_to_print, theString); - return (_pstr_to_print); -} -#endif diff --git a/libraries/PinChangeInt/Examples/PinChangeIntExample/PinChangeIntExample.pde b/libraries/PinChangeInt/Examples/PinChangeIntExample/PinChangeIntExample.pde deleted file mode 100644 index 2f254d4..0000000 --- a/libraries/PinChangeInt/Examples/PinChangeIntExample/PinChangeIntExample.pde +++ /dev/null @@ -1,77 +0,0 @@ -// PinChangeIntExample, version 1.1 Sun Jan 15 06:24:19 CST 2012 -// See the Wiki at http://code.google.com/p/arduino-pinchangeint/wiki for more information. -//-------- define these in your sketch, if applicable ---------------------------------------------------------- -// You can reduce the memory footprint of this handler by declaring that there will be no pin change interrupts -// on any one or two of the three ports. If only a single port remains, the handler will be declared inline -// reducing the size and latency of the handler. -//#define NO_PORTB_PINCHANGES // to indicate that port b will not be used for pin change interrupts -//#define NO_PORTC_PINCHANGES // to indicate that port c will not be used for pin change interrupts -// #define NO_PORTD_PINCHANGES // to indicate that port d will not be used for pin change interrupts -// if there is only one PCInt vector in use the code can be inlined -// reducing latency and code size -// define DISABLE_PCINT_MULTI_SERVICE below to limit the handler to servicing a single interrupt per invocation. -// #define DISABLE_PCINT_MULTI_SERVICE -//-------- define the above in your sketch, if applicable ------------------------------------------------------ -#include - -// This example demonstrates a configuration of 3 interrupting pins and 2 interrupt functions. -// All interrupts are serviced immediately, but one of the pins (pin 4) will show you immediately -// on the Terminal. The other function connected to 2 pins sets an array member that is queried in loop(). -// You can then query the array at your leisure. -// This makes loop timing non-critical. - -// Add more Pins at your leisure. -// For the Analog Input pins used as digital input pins, and you can use 14, 15, 16, etc. -// or you can use A0, A1, A2, etc. (the Arduino code comes with #define's -// for the Analog Input pins and will properly recognize e.g., pinMode(A0, INPUT); -#define PIN1 2 -#define PIN2 3 -#define PIN3 4 - -uint8_t latest_interrupted_pin; -uint8_t interrupt_count[20]={0}; // 20 possible arduino pins -void quicfunc() { - latest_interrupted_pin=PCintPort::arduinoPin; - interrupt_count[latest_interrupted_pin]++; -}; - -// You can assign any number of functions to any number of pins. -// How cool is that? -void pin3func() { - Serial.print("Pin "); Serial.print(PIN3, DEC); Serial.println("!"); -} - -void setup() { - pinMode(PIN1, INPUT); digitalWrite(PIN1, HIGH); - PCintPort::attachInterrupt(PIN1, &quicfunc, FALLING); // add more attachInterrupt code as required - pinMode(PIN2, INPUT); digitalWrite(PIN2, HIGH); - PCintPort::attachInterrupt(PIN2, &quicfunc, FALLING); - pinMode(PIN3, INPUT); digitalWrite(PIN3, HIGH); - PCintPort::attachInterrupt(PIN3, &pin3func, CHANGE); - Serial.begin(115200); - Serial.println("---------------------------------------"); -} - -uint8_t i; -void loop() { - uint8_t count; - Serial.print("."); - delay(1000); - for (i=0; i < 20; i++) { - if (interrupt_count[i] != 0) { - count=interrupt_count[i]; - interrupt_count[i]=0; - Serial.print("Count for pin "); - if (i < 14) { - Serial.print("D"); - Serial.print(i, DEC); - } else { - Serial.print("A"); - Serial.print(i-14, DEC); - } - Serial.print(" is "); - Serial.println(count, DEC); - } - } -} - diff --git a/libraries/PinChangeInt/Examples/PinChangeIntSpeedTest/PinChangeIntSpeedTest.pde b/libraries/PinChangeInt/Examples/PinChangeIntSpeedTest/PinChangeIntSpeedTest.pde deleted file mode 100644 index f0ac0f2..0000000 --- a/libraries/PinChangeInt/Examples/PinChangeIntSpeedTest/PinChangeIntSpeedTest.pde +++ /dev/null @@ -1,265 +0,0 @@ -// PinChangeIntSpeedTest by GreyGnome aka Mike Schwager. Version numbers here refer to this sketch. -// Version 1.0 - initial version -// Version 1.1 - added code to test digitalRead() -// Version 1.2 - added new comments for the #define's for the NO_PORTx_PINCHANGES. -// Version 1.3 - includes cbiface.h with ooPinChangeInt, rather than cb.h -// Version 1.4 - testing version 2.10Beta with robtillaart's optimization -// Also added a #define/#undef INLINE_PCINTFUNC for inlining of the function called by the interrupt. -// Default: #undef for using the function as per usual. Changed PCIVERSION so that -// ooPinChangeInt starts at 1000 instead of 200. Modified the "Start" message to show "Start..", pause -// for 1 second, show "*\n" (where \n is a newline), pause for 1 second, then run the test. -// Version 1.4 - made this compatible with version 1.5 of PinChangeInt -// Version 1.5 - modified it to use #define OOPCIVERSION for ooPinChangeInt - -// This version number is for ooPinChangeInt -//#define OOPCIVERSION 1030 -#ifndef OOPCIVERSION -#define PCIVERSION 217 // 110 if using PinChangeInt-1.1, 120 for version 1.2 - // 1000 for ooPinChangeIntversion 1.00, 1001 for ooPinChangeInt version 1.01, etc. -#endif - -//-------- define these in your sketch, if applicable ---------------------------------------------------------- -// You can reduce the memory footprint of this handler by declaring that there will be no pin change interrupts -// on any one or two of the three ports. If only a single port remains, the handler will be declared inline -// reducing the size and latency of the handler. -#undef NO_PORTB_PINCHANGES // to indicate that port b will not be used for pin change interrupts -#undef NO_PORTC_PINCHANGES // to indicate that port c will not be used for pin change interrupts -// #define NO_PORTD_PINCHANGES // to indicate that port d will not be used for pin change interrupts -// You can reduce the code size by 20-50 bytes, and you can speed up the interrupt routine -// slightly by declaring that you don't care if the static variables PCintPort::pinState and/or -// PCintPort::arduinoPin are set and made available to your interrupt routine. -// #define NO_PIN_STATE // to indicate that you don't need the pinState -// #define NO_PIN_NUMBER // to indicate that you don't need the arduinoPin -// if there is only one PCInt vector in use the code can be inlined -// reducing latency and code size -// define DISABLE_PCINT_MULTI_SERVICE below to limit the handler to servicing a single interrupt per invocation. -//#define DISABLE_PCINT_MULTI_SERVICE -//-------- define the above in your sketch, if applicable ------------------------------------------------------ -#if defined(OOPCIVERSION) - #define LIBRARYUNDERTEST "ooPinChangeInt" - #include - #if PCIVERSION == 1001 - #include - #else - #include - #endif -#else - #define LIBRARYUNDERTEST "PinChangeInt" - #include -#endif - -#define SERIALSTUFF // undef to take out all serial statements. Default: #define for measuring time. -#undef MEMTEST // undef to take out memory tests. Default: #undef for measuring time. -#undef INLINE_PCINTFUNC // define to inline the function called from the interrupt. This should have no effect, - // because the compiler will store the registers upon calling the interrupt routine, just - // like calling a function. Still, we test all assumptions. -//----------------------- -// NOTE: BECAUSE OF COLLISIONS in these libraries, you CANNOT have both libraries: PinChangeInt -// and ooPinChangeInt in the libraries directory at the same time. That said, under UNIX-y operating -// systems, it's easy to move the library directory to a name such as "PinChangeInt-1.3", which the -// Arduino will not recognize, and then create a symbolic link when you want to use a library. Such as: -// cd ~/Documents/Arduino/libaries -// mv PinChangeInt PinChangeInt-1.30 -// mv ooPinChangeInt ooPinChangeInt-1.00 -// ln -s PinChangeInt-1.30 PinChangeInt - -#undef FLASH // to flash LED on pin 13 during test - -#ifdef MEMTEST -#include -#endif - -#define TEST 6 - -#if TEST == 1 -#define PTEST 2 // pin to trigger interrupt. pins 0 and 1 are used -#define PLOW 2 // by Serial, so steer clear of them! -#define PHIGH 2 // Interrupts are attached to these pins - -#elif TEST == 2 // see the #if TEST == 2 || TEST == 3 code, below -#define PTEST 2 -#define PLOW 2 -#define PHIGH 2 // need to attachInterrupt to 5 in the code - -#elif TEST == 3 // see the #if TEST == 2 || TEST == 3 code, below -#define PTEST 5 -#define PLOW 2 -#define PHIGH 2 // need to attachInterrupt to 5 in the code - -#elif TEST == 4 -#define PTEST 2 -#define PLOW 2 -#define PHIGH 5 - -#elif TEST == 5 -#define PTEST 3 -#define PLOW 2 -#define PHIGH 5 - -#elif TEST == 6 -#define PTEST 4 -#define PLOW 2 -#define PHIGH 5 - -#elif TEST == 7 -#define PTEST 5 -#define PLOW 2 -#define PHIGH 5 -#endif - -uint8_t qf0; - -#ifdef INLINE_PCINTFUNC -#define INLINE_PCINTFUNC inline -#else -#define INLINE_PCINTFUNC -#endif -INLINE_PCINTFUNC void quicfunc(); -void quicfunc() { - qf0=TCNT0; -} - -#if defined(OOPCIVERSION) -class speedy : public CallBackInterface -{ - public: - uint8_t id; - static uint8_t var0; - speedy () { id=0; }; - speedy (uint8_t _i): id(_i) {}; - - void cbmethod() { - speedy::var0=TCNT0; - //Serial.print("Speedy method "); // debugging - //Serial.println(id, DEC); - }; -}; -uint8_t speedy::var0=0; -#endif - -volatile uint8_t *led_port; -volatile uint8_t *pinT_OP; -volatile uint8_t *pinT_IP; -uint8_t led_mask, not_led_mask; -uint8_t pinT_M, not_pinT_M; -volatile uint8_t pintest, pinIntLow, pinIntHigh; -uint8_t totalpins; -#if defined(OOPCIVERSION) -speedy speedster[8]={speedy(0), speedy(1), speedy(2), speedy(3), speedy(4), speedy(5), speedy(6), speedy(7) }; -#endif -#ifdef MEMTEST -int freemem; -#endif - -int i=0; - -#define PINLED 13 -void setup() -{ -#ifdef SERIALSTUFF - Serial.begin(115200); Serial.println("---------------------------------------"); -#endif // SERIALSTUFF - // set up ports for trigger - pinMode(0, OUTPUT); digitalWrite(0, HIGH); - pinMode(1, OUTPUT); digitalWrite(1, HIGH); - pinMode(2, OUTPUT); digitalWrite(2, HIGH); - pinMode(3, OUTPUT); digitalWrite(3, HIGH); - pinMode(4, OUTPUT); digitalWrite(4, HIGH); - pinMode(5, OUTPUT); digitalWrite(5, HIGH); - pinMode(6, OUTPUT); digitalWrite(6, HIGH); - pinMode(7, OUTPUT); digitalWrite(7, HIGH); -#ifdef FLASH - led_port=portOutputRegister(digitalPinToPort(PINLED)); - led_mask=digitalPinToBitMask(PINLED); - not_led_mask=led_mask^0xFF; - pinMode(PINLED, OUTPUT); digitalWrite(PINLED, LOW); -#endif - // ***************************************************************************** - // set up ports for output ************ PIN TO TEST IS GIVEN HERE ************** - // ***************************************************************************** - pintest=PTEST; - pinIntLow=PLOW; pinIntHigh=PHIGH; // Interrupts are attached to these pins - // ***************************************************************************** - // ***************************************************************************** - pinT_OP=portOutputRegister(digitalPinToPort(pintest)); // output port - pinT_IP=portInputRegister(digitalPinToPort(pintest)); // input port - pinT_M=digitalPinToBitMask(pintest); // mask - not_pinT_M=pinT_M^0xFF; // not-mask - *pinT_OP|=pinT_M; - for (i=pinIntLow; i <= pinIntHigh; i++) { -#if defined(OOPCIVERSION) - PCintPort::attachInterrupt(i, &speedster[i], CHANGE); // C++ technique; v1.3 or better -#endif -#if defined(PCIVERSION) - PCintPort::attachInterrupt((uint8_t) i, &quicfunc, CHANGE); // C technique; v1.2 or earlier -#endif - } -#if TEST == 2 || TEST == 3 - i=5; totalpins=2; -#if defined(OOPCIVERSION) - PCintPort::attachInterrupt(i, &speedster[i], CHANGE); // C++ technique; v1.3 or better -#endif -#if defined(PCIVERSION) - PCintPort::attachInterrupt(i, &quicfunc, CHANGE); // C technique; v1.2 or earlier -#endif -#else - totalpins=pinIntHigh - pinIntLow + 1; -#endif - i=0; -} // end setup() - -uint8_t k=0; -unsigned long milliStart, milliEnd, elapsed; -void loop() { - k=0; - *pinT_OP|=pinT_M; // pintest to 1 -#ifdef SERIALSTUFF - Serial.print(LIBRARYUNDERTEST); Serial.print(" "); - Serial.print("TEST: "); Serial.print(TEST, DEC); Serial.print(" "); -#ifndef MEMTEST - Serial.print("test pin mask: "); Serial.print(pinT_M, HEX); - Serial.print(". Total of "); Serial.print(totalpins, DEC); Serial.println(" pins enabled."); -#endif -#ifdef MEMTEST - freemem=freeMemory(); Serial.print("Free memory: "); Serial.println(freemem, DEC); -#endif -#endif - delay(1000); - Serial.print("Start.."); - delay(1000); Serial.print("*"); - #ifdef FLASH - *led_port|=led_mask; - #endif - milliStart=millis(); - while (k < 10) { - i=0; - while (i < 10000) { - *pinT_OP&=not_pinT_M; // pintest to 0 ****************************** 16.8 us - *pinT_OP|=pinT_M; // pintest to 1 ****************************** ...to get here - i++; - } - k++; - } - milliEnd=millis(); - #ifdef FLASH - *led_port&=not_led_mask; - #endif - elapsed=milliEnd-milliStart; - #ifndef MEMTEST - Serial.print(" Elapsed: "); - Serial.println(elapsed, DEC); - #endif - #ifdef SERIALSTUFF - Serial.print("Interrupted pin: "); - #if defined(OOPCIVERSION) - Serial.println(speedster[pintest].id, DEC); - #else - Serial.println(PCintPort::arduinoPin, DEC); - #endif -#ifdef MEMTEST - freemem=freeMemory(); Serial.print("END-Free memory: "); Serial.println(freemem, DEC); -#endif -#endif - delay(500); -} - diff --git a/libraries/PinChangeInt/Examples/PinChangeIntTest/PinChangeIntTest.pde b/libraries/PinChangeInt/Examples/PinChangeIntTest/PinChangeIntTest.pde deleted file mode 100644 index c8df127..0000000 --- a/libraries/PinChangeInt/Examples/PinChangeIntTest/PinChangeIntTest.pde +++ /dev/null @@ -1,344 +0,0 @@ -// PinChangeIntTest -// version 1.0 Wed Feb 15 07:25:09 CST 2012 -// Version 1.1 Fri Jun 22 19:10:50 CDT 2012 minor tweaks to eliminate compiler warnings. Also, there were bugfixes in ByteBuffer. -// I had some "cli()" without "sei()" in there. -// See the Wiki at http://code.google.com/p/arduino-pinchangeint/wiki for more information. -// This sketch requires the ByteBuffer library, which is found in the PinChangeInt zipfile. -//-------- define these in your sketch, if applicable ---------------------------------------------------------- -//-------- This must go ahead of the #include statement -------------------------------------------------------- -// You can reduce the memory footprint of this handler by declaring that there will be no pin change interrupts -// on any one or two of the three ports. If only a single port remains, the handler will be declared inline -// reducing the size and latency of the handler. -// #define NO_PORTB_PINCHANGES // to indicate that port b will not be used for pin change interrupts -// #define NO_PORTC_PINCHANGES // to indicate that port c will not be used for pin change interrupts -// #define NO_PORTD_PINCHANGES // to indicate that port d will not be used for pin change interrupts -// You can reduce the code size by 20-50 bytes, and you can speed up the interrupt routine -// slightly by declaring that you don't care if the static variables PCintPort::pinState and/or -// PCintPort::arduinoPin are set and made available to your interrupt routine. -// #define NO_PIN_STATE // to indicate that you don't need the pinState -// #define NO_PIN_NUMBER // to indicate that you don't need the arduinoPin -// if there is only one PCInt vector in use the code can be inlined -// reducing latency and code size -// define DISABLE_PCINT_MULTI_SERVICE below to limit the handler to servicing a single interrupt per invocation. -// #define DISABLE_PCINT_MULTI_SERVICE -// The following is intended for testing purposes. If defined, then a variable PCintPort::pinMode can be read -// in your interrupt subroutine. It is not defined by default: -// #define PINMODE -//-------- define the above in your sketch, if applicable ------------------------------------------------------ -#define PINMODE -#define FLASH -#include -#include - -// This example demonstrates a configuration of 6 interrupting pins and 3 interrupt functions. -// A variety of interrupting pins have been chosen, so as to test all PORTs on the Arduino. -// The pins are as follows: -#define tPIN1 2 // port D -#define tPIN2 3 -#define tPIN3 11 // Port B -#define tPIN4 12 -#define tPIN5 A3 // Port C, also can be given as "17" -#define tPIN6 A4 // starts and stops the count -// All pins send interrupts. Arduino pins 2 and A4 (tPIN1,6) interrupt on FALLING. -// Arduino pins 3 and 12 (tPIN2,4) interrupt on RISING. -// Arduino pins 11 and A3 (tPIN5) interrupts on CHANGE. -// quicfunc0 is attached to Arduino pins 2, 3, 11, and 12 (tPIN1-4) -// quicfunc1 is attached to Arduino pin A3 (tPIN5) -// quicfunc2 is attached to Arduino pin A4 (tPIN6). -// NOTE: -// For the Analog Input pins used as digital input pins, you can use numbers such as 14, 15, 16, etc. -// or you can use A0, A1, A2, etc. (the Arduino code comes with #define's for the Analog Input pin -// names and will properly recognize e.g., pinMode(A0, INPUT)); - -// HOW IT WORKS -// The interrupt on Arduino pin A4 (tPIN6) will, when triggered, start the counting of interrupts. -// The array interrupt_count0[20] is updated in the interrupts; each cell keeps track of the number -// of interrupts on one of the 20 available interrupt pins on the Arduino. Every second in the main -// loop the array is scanned and registered interrupts are reported for all pins interrupted since -// the previous second. If no interrupts, the output is quiet. - -// tPIN6 is special. Not only does it start the counting of the interrups, but it turns on and off -// interrupts on pins 2, 11, and A3/17 (tPIN1, tPIN3, tPIN5). All pins start by interrupting, but after -// the count is turned on and then turned off, the 3 pins are detached from interrupts. -// Everytime thereafter when the count is turned off the 3 pins are detached. They are reattached -// when turned on. - -// Output is copied to a buffer, because we can't do a Serial.print() statement in an interrupt -// routine. The main loop checks for entries in the buffer and prints them if found. -// Output looks like this: -// -F- - an interrupt triggered by a falling signal occurred. -// +R+ - an interrupt triggered by a rising signal occurred. -// *C* - an interrupt triggered by a change in signal occurred. -// f#p#-P# - f# shows the interrupt subroutine that was called: 0, 1, or 2 -// - p# shows the pin number that triggered the interrupt -// - P# shows the port that this pin number is attached to. 2 is PORTB, 3 is PORTC, 4 is PORTD - -// HOW TO CONNECT -// Each pin gets a momentary contact switch connected to it. One side of the switch should connect -// to ground. The other side of the switch connects to the Arduino pin. For my purposes, I am using -// two rotary encoders. Each encoder contains 3 switches. But 6 regular pushbuttons would work, too. - -/* WHAT TO LOOK FOR - Output is sent to the serial line, so the Arduino IDE's serial terminal should be opened. - Upon startup, press tPINS1-5. You will see output like this: --F-f0p2-P4 (counting off) -..*C*f0p11-P2 (counting off) -+R+f0p3-P4 (counting off) - This shows that - 1. an interrupt was triggered on a falling signal (*F*). It called (f0) function 0, which is quicfunc0. - The triggering pin was (p2) Arduuino pin 2, which is on (P4) Port 4 (PORTD). Counting of this interrupt is - off, so you will not see any output from the main loop. - 2. Two dots appeared. Dots came from iterations of loop(), so these 2 dots show that the two interrupts happened 2 seconds apart. - 3. an interrupt was triggered on a change in signal (*C*). It called quicfunc0, from Arduino pin 11, on Port 2 (PORTB). - The interrupt was not counted. - 4. an interrupt was triggered on a rising signal (+R+). It called quicfunc0, from Arduino pin 3, on Purt 4 (PORTD). - The pin should have started out at the high level, so likely the signal fell during onother interrupt, and now - the rise has been caught. - - Now press the button attached to tPIN6 (in our case, A4 or D18). You will see something like this: --F-START! f2p18-P3 -.Count for pin A4 is 1 - This shows that - 1. The counting machanism (START!) was triggered by a folling signal (-F-) on pin 18 (p18) which is in Port 3 (P3) (which == PORTC) and - function f2 was called (f2). - 2. A dot appeared, which came from loop() because a second passed. - 3. The count for p18 or A4 was displayed. - - Now you will see messages for all the pins that you manipulate, for example: -*C*f0p11-P2 -+R+f0p3-P4 -*C*f0p11-P2 -+R+f0p3-P4 -*C*f0p11-P2 -.Count for pin D3 is 6 -Count for pin D11 is 9 -.+R+f0p3-P4 --F-f0p2-P4 -.Count for pin D2 is 1 -Count for pin D3 is 1 - These codes reflect the interrupts, as described above. This output will take place until you press tPIN6: --F-f2: STOP! Counting off. -Interrupt OFF on tPIN1 (2) tPIN3 (11) tPIN5 (17) - Then you will see output like this: -.....................+R+f0p12-P2 (counting off) -.+R+f0p12-P2 (counting off) -+R+f0p12-P2 (counting off) -+R+f0p12-P2 (counting off) - and tPIN1, tPIN3, and tPIN5 will not trigger interrupts. -*/ -// NOTES -// Output overwrites: -// It's possible during moderately fast interrupts to see your print output get garbled; eg, -// +R+f0p12-P2 (+R+f0p12-P2 (counting +R+f0p12-P2 (cou+R+f0p12-P+R+f0p12 -// This is because the print of the buffer takes place inside a while loop, and it can -// be interrupted and new data inserted into the buffer at a midpoint of the buffer's text. -// Just by spinning my rotary encoders I can readily generate over 200 interrupts per second -// on a pin, which is easily fast enough to overrun Serial output at 115,200 bps. -// The lesson here? ...Interrupts are tricky, and interrupt service routines should be fast. -// Just sayin'. - -// Pins: -// We want to use pins from each of ports B, C and D. So choose wisely. Ports are shown in -// this diagram of the ATmega328P chip. PD0 means "Port D, pin 0". PC3 means "Port C, Pin 3", -// PB2 means "Port B, pin 2" and so on. The corresponding Arduino pins are in parentheses. -// So PB2 is Arduino pin D 10, for example. -/* - +-\/-+ - PC6 1| |28 PC5 (AI 5) - (D 0) PD0 2| |27 PC4 (AI 4) - (D 1) PD1 3| |26 PC3 (AI 3) - (D 2) PD2 4| |25 PC2 (AI 2) - PWM+ (D 3) PD3 5| |24 PC1 (AI 1) - (D 4) PD4 6| |23 PC0 (AI 0) - VCC 7| |22 GND - GND 8| |21 AREF - PB6 9| |20 AVCC - PB7 10| |19 PB5 (D 13) - PWM+ (D 5) PD5 11| |18 PB4 (D 12) - PWM+ (D 6) PD6 12| |17 PB3 (D 11) PWM - (D 7) PD7 13| |16 PB2 (D 10) PWM - (D 8) PB0 14| |15 PB1 (D 9) PWM - +----+ -*/ - -uint8_t pins[6]={ tPIN1, tPIN2, tPIN3, tPIN4, tPIN5, tPIN6 }; -uint8_t ports[6]={ 0, 0, 0, 0, 0, 0 }; - -uint8_t latest_interrupted_pin; -uint8_t interrupt_count[20]={0}; // 20 possible arduino pins -uint8_t port; -uint8_t mode; - -ByteBuffer printBuffer(80); -char charArray[16]; -char numBuffer[4] = { 0, 0, 0, 0 }; -uint8_t printFull=0; - -volatile boolean start=0; -volatile boolean initial=true; -long begintime=0; -long now=0; - -void uint8ToString(char *outString, uint8_t number) { - uint8_t hundreds=0; - uint8_t tens=0; - uint8_t ones=0; - - while (number >= 100 ) { - hundreds++; - number-=100; - } - while (number >= 10 ) { - tens++; - number-=10; - } - ones=number; - ones+=48; - if (hundreds > 0) { hundreds+=48; tens+=48; outString[0]=hundreds; outString[1]=tens; outString[2]=ones; outString[3]=0; } - else if (tens > 0) { tens+=48; outString[0]=tens; outString[1]=ones; outString[2]=0; } - else { outString[0]=ones; outString[1]=0; }; -} - -void showMode() { - switch (mode) { - case FALLING: - printBuffer.putString((char *) "-F-"); - break; - case RISING: - printBuffer.putString((char *) "+R+"); - break; - case CHANGE: - printBuffer.putString((char *) "*C*"); - break; - } -} - -void quicfunc0() { - latest_interrupted_pin=PCintPort::arduinoPin; - mode=PCintPort::pinmode; - showMode(); - if (start==1) { - interrupt_count[latest_interrupted_pin]++; - } - uint8ToString(numBuffer, latest_interrupted_pin); - printBuffer.putString((char *) "f0p"); printBuffer.putString(numBuffer); printBuffer.putString((char *) "-P"); - uint8ToString(numBuffer, digitalPinToPort(latest_interrupted_pin)); - printBuffer.putString(numBuffer); - if (start !=1) printBuffer.putString((char *) " (counting off)"); - printBuffer.putString((char *) "\n"); -}; - -void quicfunc1() { - latest_interrupted_pin=PCintPort::arduinoPin; - mode=PCintPort::pinmode; - showMode(); - if (start==1) { - interrupt_count[latest_interrupted_pin]++; - } - uint8ToString(numBuffer, latest_interrupted_pin); - printBuffer.putString((char *) "f1p"); printBuffer.putString(numBuffer); printBuffer.putString((char *) "-P"); - uint8ToString(numBuffer, digitalPinToPort(latest_interrupted_pin)); - printBuffer.putString(numBuffer); - if (start !=1) printBuffer.putString((char *) " (counting off)"); - printBuffer.putString((char *) "\n"); -}; - -void quicfunc2() { - latest_interrupted_pin=PCintPort::arduinoPin; - mode=PCintPort::pinmode; - showMode(); - if (start == 1) { - printBuffer.putString((char *) "f2: STOP! Counting off.\n"); - printBuffer.putString((char *) "Interrupt OFF on tPIN1 ("); uint8ToString(numBuffer, tPIN1), printBuffer.putString(numBuffer); - printBuffer.putString((char *) ") tPIN3 (");uint8ToString(numBuffer, tPIN3), printBuffer.putString(numBuffer); - printBuffer.putString((char *) ") tPIN5 (");uint8ToString(numBuffer, tPIN5), printBuffer.putString(numBuffer); - printBuffer.putString((char *) ")\n"); - PCintPort::detachInterrupt(tPIN1); PCintPort::detachInterrupt(tPIN3); PCintPort::detachInterrupt(tPIN5); - start=0; - } else { - start=1; - interrupt_count[latest_interrupted_pin]++; - printBuffer.putString((char *) "START! f2p"); - uint8ToString(numBuffer, latest_interrupted_pin); - printBuffer.putString(numBuffer); printBuffer.putString((char *) "-P"); - uint8ToString(numBuffer, digitalPinToPort(latest_interrupted_pin)); - printBuffer.putString(numBuffer); printBuffer.putString((char *) "\n"); - if (! initial) { - PCintPort::attachInterrupt(tPIN1, &quicfunc0, FALLING); - PCintPort::attachInterrupt(tPIN3, &quicfunc0, CHANGE); - PCintPort::attachInterrupt(tPIN5, &quicfunc1, CHANGE); - } else { - initial=false; - } - } -}; - -uint8_t i; -void setup() { - Serial.begin(115200); - delay(250); - Serial.println("Test"); - delay(500); - for (i=0; i < 7; i++) { - pinMode(pins[i], INPUT); digitalWrite(pins[i], HIGH); - ports[i]=digitalPinToPort(pins[i]); - switch (pins[i]) { - case tPIN1: - PCintPort::attachInterrupt(pins[i], &quicfunc0, FALLING); - break; - case tPIN3: - PCintPort::attachInterrupt(pins[i], &quicfunc0, CHANGE); - break; - case tPIN2: - case tPIN4: - PCintPort::attachInterrupt(pins[i], &quicfunc0, RISING); - break; - case tPIN5: - PCintPort::attachInterrupt(pins[i], &quicfunc1, CHANGE); - break; - case tPIN6: - PCintPort::attachInterrupt(pins[i], &quicfunc2, FALLING); - break; - } - } - //Serial.println(printBuffer.getCapacity(), DEC); - //Serial.println("*---------------------------------------*"); - Serial.print("*---*"); - delay(250); - begintime=millis(); -} - -void loop() { - now=millis(); - uint8_t count; - char outChar; - // uint8_t bufsize; - //if (printBuffer.getSize() != 0) { Serial.print("SZ:"); Serial.println (printBuffer.getSize(), DEC); }; - //bufsize=printBuffer.getSize(); - //if (bufsize > 0) { Serial.print("S:"); Serial.println(bufsize); } - while ((outChar=(char)printBuffer.get()) != 0) Serial.print(outChar); - if ((now - begintime) > 1000) { - Serial.print("."); - if (printBuffer.checkError()) { - Serial.println("NOTICE: Some output lost due to filled buffer."); - } - for (i=0; i < 20; i++) { - if (interrupt_count[i] != 0) { - count=interrupt_count[i]; - interrupt_count[i]=0; - Serial.print("Count for pin "); - if (i < 14) { - Serial.print("D"); - Serial.print(i, DEC); - } else { - Serial.print("A"); - Serial.print(i-14, DEC); - } - Serial.print(" is "); - Serial.println(count, DEC); - } - } - begintime=millis(); - } -} - diff --git a/libraries/PinChangeInt/Examples/PinChangeIntTest2/PinChangeIntTest2.ino b/libraries/PinChangeInt/Examples/PinChangeIntTest2/PinChangeIntTest2.ino deleted file mode 100644 index aec34c4..0000000 --- a/libraries/PinChangeInt/Examples/PinChangeIntTest2/PinChangeIntTest2.ino +++ /dev/null @@ -1,275 +0,0 @@ -//#define DISABLE_PCINT_MULTI_SERVICE -#define PINMODE -#define FLASH -#include -#include -#include - -// This example demonstrates a configuration of 6 interrupting pins and 3 interrupt functions. -// A variety of interrupting pins have been chosen, so as to test all PORTs on the Arduino. -// The pins are as follows: -#define tPIN1 2 // port D -#define tPIN2 3 -#define tPIN3 11 // Port B -#define tPIN4 12 -#define tPIN5 A3 // Port C, also can be given as "17" -#define tPIN6 A4 // starts and stops the count - -uint8_t pins[6]={ tPIN1, tPIN2, tPIN3, tPIN4, tPIN5, tPIN6 }; -uint8_t ports[6]={ 0, 0, 0, 0, 0, 0 }; - -uint8_t latest_interrupted_pin; -uint8_t interrupt_count[20]={0}; // 20 possible arduino pins -uint8_t port; -uint8_t mode; - -ByteBuffer printBuffer(200); -char charArray[16]; -char numBuffer[5] = { 0, 0, 0, 0, 0 }; -uint8_t printFull=0; - -volatile boolean start=0; -volatile boolean initial=true; -long begintime=0; -long now=0; - -void uint8ToHexString(char *outString, uint8_t theByte) { - outString[0]='0'; outString[1]='x'; - uint8_t hinybble=theByte>>4; - uint8_t lonybble=theByte & 0x0F; - if (hinybble < 0x0a) outString[2]=hinybble+48; - else outString[2]=hinybble+55; - if (lonybble < 0x0a) outString[3]=lonybble+48; - else outString[3]=lonybble+55; - outString[4]=0; -} - -void uint8ToString(char *outString, uint8_t number) { - uint8_t hundreds=0; - uint8_t tens=0; - uint8_t ones=0; - - while (number >= 100 ) { - hundreds++; - number-=100; - } - while (number >= 10 ) { - tens++; - number-=10; - } - ones=number; - ones+=48; - if (hundreds > 0) { hundreds+=48; tens+=48; outString[0]=hundreds; outString[1]=tens; outString[2]=ones; outString[3]=0; } - else if (tens > 0) { tens+=48; outString[0]=tens; outString[1]=ones; outString[2]=0; } - else { outString[0]=ones; outString[1]=0; }; -} - -void showMode() { - switch (mode) { - case FALLING: - printBuffer.putString(getPSTR("-F-")); - break; - case RISING: - printBuffer.putString(getPSTR("+R+")); - break; - case CHANGE: - printBuffer.putString(getPSTR("*C*")); - break; - } -} - -/* -void quicfunc0() { - latest_interrupted_pin=PCintPort::arduinoPin; - mode=PCintPort::pinmode; - showMode(); - if (start==1) { - interrupt_count[latest_interrupted_pin]++; - } - uint8ToString(numBuffer, latest_interrupted_pin); - printBuffer.putString((char *) "f0p"); printBuffer.putString(numBuffer); printBuffer.putString((char *) "-P"); - uint8ToString(numBuffer, digitalPinToPort(latest_interrupted_pin)); - printBuffer.putString(numBuffer); - if (start !=1) printBuffer.putString(getPSTR(" no count")); - printBuffer.putString((char *) "\n"); -}; - -void quicfunc1() { - latest_interrupted_pin=PCintPort::arduinoPin; - mode=PCintPort::pinmode; - showMode(); - if (start==1) { - interrupt_count[latest_interrupted_pin]++; - } - uint8ToString(numBuffer, latest_interrupted_pin); - printBuffer.putString(getPSTR("f1p")); printBuffer.putString(numBuffer); printBuffer.putString((char *) "-P"); - uint8ToString(numBuffer, digitalPinToPort(latest_interrupted_pin)); - printBuffer.putString(numBuffer); - if (start !=1) printBuffer.putString(getPSTR(" (counting off)")); - printBuffer.putString((char *) "\n"); -}; -*/ - -void quicfunc2() { - //*led_port|=led_mask; - //*led_port&=not_led_mask; // 2 micros to here (ie, 2 micros used to push registers and call subroutine) - latest_interrupted_pin=PCintPort::arduinoPin; - mode=PCintPort::pinmode; - showMode(); - *led_port|=led_mask; // 73 micros to get here from above. Used in "Rigol Timing Example" - *led_port&=not_led_mask; - //uint8ToString(numBuffer, PCintPort::s_count); printBuffer.putString(numBuffer); - *led_port|=led_mask; // 73 micros to get here from above. Second pulse in "Rigol Timing Example" - *led_port&=not_led_mask; - printBuffer.putString(getPSTR(" f2: P"));/* - uint8ToHexString(numBuffer, *portInputRegister(3)); printBuffer.putString(numBuffer);// C port - printBuffer.putString(getPSTR(" pin:")); uint8ToString(numBuffer, latest_interrupted_pin); printBuffer.putString(numBuffer); - printBuffer.putString(getPSTR(" c")); uint8ToHexString(numBuffer, PCintPort::curr); printBuffer.putString(numBuffer); - printBuffer.putString(getPSTR(" l")); uint8ToHexString(numBuffer, PCintPort::s_lastPinView); printBuffer.putString(numBuffer); - printBuffer.putString(getPSTR(" r")); uint8ToHexString(numBuffer, PCintPort::s_portRisingPins); printBuffer.putString(numBuffer); - printBuffer.putString(getPSTR(" f")); uint8ToHexString(numBuffer, PCintPort::s_portFallingPins); printBuffer.putString(numBuffer); - printBuffer.putString(getPSTR(" m")); uint8ToHexString(numBuffer, PCintPort::s_pmask); printBuffer.putString(numBuffer); - printBuffer.putString(getPSTR(" P")); printBuffer.put(PCintPort::s_PORT); printBuffer.putString("\r\n"); - printBuffer.putString(getPSTR("cp")); uint8ToHexString(numBuffer, PCintPort::s_changedPins); printBuffer.putString(numBuffer); - printBuffer.putString(getPSTR(" cXORlpv")); uint8ToHexString(numBuffer, PCintPort::s_currXORlastPinView); printBuffer.putString(numBuffer); - printBuffer.putString(getPSTR(" rp_nCurr")); uint8ToHexString(numBuffer, PCintPort::s_portRisingPins_nCurr); printBuffer.putString(numBuffer); - printBuffer.putString(getPSTR(" fp_nNCurr")); uint8ToHexString(numBuffer, PCintPort::s_portFallingPins_nNCurr); printBuffer.putString(numBuffer); - */printBuffer.putString("\r\n"); - if (PCintPort::pcint_multi > 0) { - printBuffer.putString("MULTI!\n"); PCintPort::pcint_multi=0; - } - if (PCintPort::PCIFRbug > 0) { printBuffer.putString("ERROR: BUG- PCIFR should be reset!"); PCintPort::PCIFRbug=0; } - //s_registers, if it existed, could be used to keep a running queue of the latest interrupts that have - //been serviced by the PCint(). But generally I don't think it's necessary for debugging at this point (famous last words?) - /*if (PCintPort::s_count > 2) { - for (uint8_t i=0; i < PCintPort::s_count; i++) { - uint8ToHexString(numBuffer, PCintPort::s_registers[i]); printBuffer.putString(numBuffer); printBuffer.putString(" "); - } - } - PCintPort::s_count=0;*/ - /* - if (start == 1) { - printBuffer.putString(getPSTR("STOP Count off\n")); - printBuffer.putString(getPSTR("Intr OFF: (")); uint8ToString(numBuffer, tPIN1), printBuffer.putString(numBuffer); - printBuffer.putString((char *) " "); uint8ToString(numBuffer, tPIN3), printBuffer.putString(numBuffer); - printBuffer.putString((char *) " "); uint8ToString(numBuffer, tPIN5), printBuffer.putString(numBuffer); - printBuffer.putString((char *) ")\n"); - PCintPort::detachInterrupt(tPIN1); PCintPort::detachInterrupt(tPIN3); PCintPort::detachInterrupt(tPIN5); - start=0; - } else { - start=1; - interrupt_count[latest_interrupted_pin]++; - printBuffer.putString(getPSTR("START! p")); - uint8ToString(numBuffer, latest_interrupted_pin); - printBuffer.putString(numBuffer); printBuffer.putString((char *) "-P"); - // MIKE put the REAL PORT HERE - uint8ToString(numBuffer, digitalPinToPort(latest_interrupted_pin)); - printBuffer.putString(numBuffer); printBuffer.putString((char *) "\n"); - if (! initial) { - PCintPort::attachInterrupt(tPIN1, &quicfunc0, FALLING); - PCintPort::attachInterrupt(tPIN3, &quicfunc0, CHANGE); - PCintPort::attachInterrupt(tPIN5, &quicfunc1, CHANGE); - } else { - initial=false; - } - }*/ -}; - -uint8_t i; -char hexBuffer[5]; -void setup() { - int8_t returncode=1; - Serial.begin(115200); - Serial.println("Test"); - delay(500); - for (i=5; i < 6; i++) { - pinMode(pins[i], INPUT); digitalWrite(pins[i], HIGH); - ports[i]=digitalPinToPort(pins[i]); - switch (pins[i]) { - /*case tPIN1: - #if PCINT_VERSION > 2100 - returncode=PCintPort::attachInterrupt(pins[i], &quicfunc0, FALLING); - #else - PCintPort::attachInterrupt(pins[i], &quicfunc0, FALLING); - #endif - Serial.println(getPSTR("FIRST FAILURE OK.")); - break; - case tPIN3: - #if PCINT_VERSION > 2100 - returncode=PCintPort::attachInterrupt(pins[i], &quicfunc0, CHANGE); - #else - PCintPort::attachInterrupt(pins[i], &quicfunc0, CHANGE); - #endif - break; - case tPIN2: - case tPIN4: - #if PCINT_VERSION > 2100 - returncode=PCintPort::attachInterrupt(pins[i], &quicfunc0, RISING); - #else - PCintPort::attachInterrupt(pins[i], &quicfunc0, RISING); - #endif - break; - case tPIN5: - #if PCINT_VERSION > 2100 - returncode=PCintPort::attachInterrupt(pins[i], &quicfunc1, CHANGE); - #else - PCintPort::attachInterrupt(pins[i], &quicfunc1, CHANGE); - #endif - break;*/ - case tPIN6: - #if PCINT_VERSION > 2100 - returncode=PCintPort::attachInterrupt(pins[i], &quicfunc2, FALLING); - #else - PCintPort::attachInterrupt(pins[i], &quicfunc2, FALLING); - #endif - break; - } - #if PCINT_VERSION > 2100 - Serial.print(getPSTR("setup(): Interrupt attach ")); - if (returncode != 1) Serial.print(getPSTR("unsuccessful ")); - else Serial.print(getPSTR("GOOD ")); - Serial.print(pins[i], DEC); - Serial.print(getPSTR(":pin, code: ")); Serial.println(returncode, DEC); - #endif - } - //Serial.println(printBuffer.getCapacity(), DEC); - //Serial.println("*---------------------------------------*"); - Serial.print("*---*"); - delay(250); - begintime=millis(); -} - -void loop() { - now=millis(); - uint8_t count; - char outChar; - // uint8_t bufsize; - //if (printBuffer.getSize() != 0) { Serial.print("SZ:"); Serial.println (printBuffer.getSize(), DEC); }; - //bufsize=printBuffer.getSize(); - //if (bufsize > 0) { Serial.print("S:"); Serial.println(bufsize); } - while ((outChar=(char)printBuffer.get()) != 0) Serial.print(outChar); - if ((now - begintime) > 1000) { - Serial.print("."); - if (printBuffer.checkError()) { - Serial.println(getPSTR("!Some output lost due to full buffer!")); - } - for (i=0; i < 20; i++) { - if (interrupt_count[i] != 0) { - count=interrupt_count[i]; - interrupt_count[i]=0; - Serial.print(getPSTR("Count for pin ")); - if (i < 14) { - Serial.print("D"); - Serial.print(i, DEC); - } else { - Serial.print("A"); - Serial.print(i-14, DEC); - } - Serial.print(" is "); - Serial.println(count, DEC); - } - } - begintime=millis(); - } -} - diff --git a/libraries/PinChangeInt/RELEASE_NOTES b/libraries/PinChangeInt/RELEASE_NOTES deleted file mode 100644 index 635e4f8..0000000 --- a/libraries/PinChangeInt/RELEASE_NOTES +++ /dev/null @@ -1,332 +0,0 @@ -****************************************************************************** - - PinChangeInt - ---- RELEASE NOTES --- - -Version 2.19 (beta) Tue Nov 20 07:33:37 CST 2012 -SANGUINO SUPPORT! ...And Mioduino! -...The ATmega644 chip is so cool, how can I not? 4 full ports of Pin Change Interrupt bliss! 32 i/o pins! 64k Flash! 4k RAM! Well I wish I had one. That said, Sanguino users, PLEASE send in your bug or bliss reports! Your interrupt-loving brethren and sistren are depending on you, so I can assure everyone that my changes work on that platform. Thanks. - -Modified the addPin() method to save 12 bytes; thanks again robtilllart! - if (firstPin != NULL) { - tmp=firstPin; - do { - if (tmp->arduinoPin == arduinoPin) { enable(tmp, userFunc, mode); return(0); } - if (tmp->next == NULL) break; - tmp=tmp->next; - } while (true); - } -Also changed the goto in the PCint() loop to be a while/break combination. No change to -code speed, but it looks better and passes the cleanliness "gut check". - -Includes PinChangeIntTest 1.5 sketch. - -...Ooops! Forgot the GetPSTR library, needed for the PinChangeIntTest code! Now it's included. -****************************************************************************** -Version 2.17 (beta) Sat Nov 17 09:46:50 CST 2012 -Another bugfix in the PCINT_MULTI_SERVICE section. I was using sbi(PCIFR, PCICRbit); -I didn't realize that was for I/O ports, and not ATmega registers. -But according to "deprecated.h", -"These macros became obsolete, as reading and writing IO ports can - be done by simply using the IO port name in an expression, and all - bit manipulation (including those on IO ports) can be done using - generic C bit manipulation operators." -So now I do: - PCIFR |= PCICRbit; -****************************************************************************** -Version 2.15 (beta) Sat Nov 17 01:17:44 CST 2012 -Fixed it so that attachInterrupt() will now follow your changes to the user function, -as well as the mode. detachInterrupt() still does not delete the PCintPin object but -at least you can detach and reattach at will, using different modes (RISING, FALLING, -CHANGE) and different functions as you wish. - -****************************************************************************** -Version 2.13 (beta) Mon Nov 12 09:33:06 CST 2012 -SIGNIFICANT BUGFIX release! Significant changes: -1. PCintPort::curr bug. Interrupts that occur rapidly will likely not get serviced properly by PCint(). -2. PCint() interrupt handler optimization. -3. PCIFR port bit set bug fix. -4. Many static variables added for debugging; used only when #define PINMODE is on. -5. detachInterrupt() no longer does a delete(), since that wasn't working anyway. When you detachInterrupt(), the PORT just disables interrupts for that pin; the PCintPin object remains in memory and in the linked list of pins (possibly slowing down your interrupts a couple of micros). You can reenable a detached interrupt- but you must do it within the PinChangeInt library (would anyone ever enable an interrupt on a pin, then disable it, then have need to reenable it but not using the library?). -6. attachInterrupt() now returns a uint8_t value: 1 on successful attach, 0 on successful attach but using an already-enabled pin, and -1 if the new() operator failed to create a PCintPin object. -Also, modified these release notes. - -Details: - -Uncovered a nasty bug, thanks to robtillaart on the Arduino Forums and Andre' Franken who posted to the PinChangeInt groups. This bug was introduced by me when I assigned PCintPort::curr early in the interrupt handler: -ISR(PCINT0_vect) { - PCintPort::curr = portB.portInputReg; - portB.PCint(); -} -Later, in the interrupt handler PCint(), we loop as long as PCIFR indicates a new interrupt wants to be triggered, provided DISABLE_PCINT_MULTI_SERVICE is not defined (it is not by default): -#ifndef DISABLE_PCINT_MULTI_SERVICE - pcifr = PCIFR & PCICRbit; - PCIFR = pcifr; // clear the interrupt if we will process it (no effect if bit is zero) -} while(pcifr); -#endif -...Well. Problem is, if a pin pops up and causes the PCIFR to change, we have to reread the port and look at how it is now! I wasn't doing that before, so if a new interrupt appeared while I was still servicing the old one, odd behavior would take place. For example, an interrupt would register but then the userFunc would not be called upon to service it. The code needs to be: - pcifr = PCIFR & PCICRbit; - PCIFR = pcifr; // clear the interrupt if we will process it (no effect if bit is zero) - PCintPort::curr=portInputReg; // ...Fixed in 2.11beta. -} while(pcifr); - -Also, made the interrupt handler even faster with an optimization from robtillaart to take out the checks for changed pins from the while() loop that steps through the pins: -uint8_t changedPins = (PCintPort::curr ^ lastPinView) & - ((portRisingPins & PCintPort::curr ) | ( portFallingPins & ~PCintPort::curr )); - -...This speedup is offset by more changes in the PCint() handler, which now looks like the following; there are two bug fixes: ----------------------------- -FIX 1: sbi(PCIFR, PCICRbit); -FIX 2: ...the aforementioned PCintPort::curr=portInputReg; -Here's the new code: ----------------------------- - #ifndef DISABLE_PCINT_MULTI_SERVICE - pcifr = PCIFR & PCICRbit; - if (pcifr) { - //if (PCIFR & PCICRbit) { // believe it or not, this adds .6 micros - sbi(PCIFR, PCICRbit); // This was a BUG: PCIFR = pcifr ...And here is the fix. - #ifdef PINMODE - PCintPort::pcint_multi++; - if (PCIFR & PCICRbit) PCintPort::PCIFRbug=1; // PCIFR & PCICRbit should ALWAYS be 0 here! - #endif - PCintPort::curr=portInputReg; // ...Fixed in 2.11beta. - goto loop; // A goto!!! Don't want to look at the portInputReg gratuitously, so the while() will not do. - } - #endif - -Also I added a lot of variables for debugging when PINMODE is defined, for routing out nasty bugs. I may need them in the future... :-( - -Finally, I am not putting newlines in this commentary so I can make it easier to paste online. - -****************************************************************************** -Version 2.11 (beta) Mon Nov 12 09:33:06 CST 2012 -See version 2.13 (beta) above. No change other than tidying up the release notes. -****************************************************************************** - Version 2.01 (beta) Thu Jun 28 12:35:48 CDT 2012 - ...Wow, Version 2! What? Why? - Modified the way that the pin is tested inside the interrupt subroutine (ISR) PCintPort::PCint(), - to make the interrupt quicker and slightly reduce the memory footprint. The interrupt's time is - reduced by 2 microseconds or about 7%. Instead of using the mode variable, two bitmasks are maintained - for each port. One bitmask contains all the pins that are configured to work on RISING signals, the other - on FALLING signals. A pin configured to work on CHANGE signals will appear in both bitmasks of the port. - Then, the test for a change goes like this: - if (thisChangedPin) { - if ((thisChangedPin & portRisingPins & PCintPort::curr ) || - (thisChangedPin & portFallingPins & ~PCintPort::curr )) { - where portRisingPins is the bitmask for the pins configured to interrupt on RISING signals, and - portFallingPins is the bitmask for the pins configured to interrupt on FALLING signals. Each port includes - these two bitmask variables. - - This is a significant change to some core functionality to the library, and it saves an appreciable amount - of time (2 out of 36 or so micros). Hence, the 2.00 designation. - - Tue Jun 26 12:42:20 CDT 2012 - I was officially given permission to use the PCint library: - - Re: PCint library - « Sent to: GreyGnome on: Today at 08:10:33 AM » - « You have forwarded or responded to this message. » - Quote Reply Remove - HI, - Yeah, I wrote the original PCint library. It was a bit of a hack and the new one has better features. - I intended the code to be freely usable. Didn't really think about a license. Feel free to use it in - your code: I hereby grant you permission. - - I'll investigate the MIT license, and see if it is appropriate. - Chris J. Kiick - Robot builder and all around geek. - - Version 1.81 (beta) Tue Jun 19 07:29:08 CDT 2012 - Created the getPCIntVersion function, and its associated GET_PCINT_VERSION preprocessor macro. The version - is a 16-bit int, therefore versions are represented as a 4-digit integer. 1810, then, is the first beta - release of 1.81x series. 1811 would be a bugfix of 1.810. 1820 would be the production release. - - Reversed the order of this list, so the most recent notes come first. - - Made some variables "volatile", because they are changed in the interrupt code. Thanks, Tony Cappellini! - - Added support for the Arduino Mega! Thanks to cserveny...@gmail.com! - NOTE: I don't have a Mega, so I rely on you to give me error (or working) reports! - To sum it up for the Mega: No Port C, no Port D. Instead, you get Port J and Port K. Port B remains. - Port J, however, is practically useless because there is only 1 pin available for interrupts. - Most of the Port J pins are not even connected to a header connector. Caveat Programmer. - - Created a function to report the version of this code. Put this #define ahead of the #include of this file, - in your sketch: - #define GET_PCINT_VERSION - Then you can call - uint16_t getPCIntVersion (); - and it will return a 16-bit integer representation of the version of this library. That is, version 1.73beta - will be reported as "1730". 1.74, then, will return "1740". And so on, for whatever version of the library - this happens to be. The odd number in the 10's position will indicate a beta version, as per usual, and the - number in the 1s place will indicate the beta revision (bugs may necessitate a 1.731, 1.732, etc.). - - Here are some of his notes based on his changes: - Mega and friends are using port B, J and K for interrupts. B is working without any modifications. - - J is mostly useless, because of the hardware UART. I was not able to get pin change notifications from - the TX pin (14), so only 15 left. All other (PORT J) pins are not connected on the Arduino boards. - - K controls Arduino pin A8-A15, working fine. - - 328/168 boards use C and D. So in case the lib is compiled with Mega target, the C and D will be - disabled. Also you cannot see port J/K with other targets. For J and K new flags introduced: - NO_PORTJ_PINCHANGES and NO_PORTK_PINCHANGES. - Maybe we should have PORTJ_PINCHANGES to enable PJ, because they will be most likely unused. - - Enjoy! - - Note: To remain consistent, I have not included PORTJ_PINCHANGES. All ports behave the same, - no matter how trivial those ports may seem... no surprises... - - Version 1.72 Wed Mar 14 18:57:55 CDT 2012 - Release. - - Version 1.71beta Sat Mar 10 12:57:05 CST 2012 - Code reordering: Starting in version 1.3 of this library, I put the code that enables - interrupts for the given pin, and the code that enables Pin Change Interrupts, ahead of actually - setting the user's function for the pin. Thus in the small interval between turning on the - interrupts and actually creating a valid link to an interrupt handler, it is possible to get an - interrupt. At that point the value of the pointer is 0, so this means that the Arduino - will start over again from memory location 0- just as if you'd pressed the reset button. Oops! - - I corrected it so the code now operates in the proper order. - (EDITORIAL NOTE: If you want to really learn something, teach it!) - - Minor code clean-up: All references to PCintPort::curr are now explicit. This changes the compiled - hex code not one whit. I just sleep better at night. - - Numbering: Changed the numbering scheme. Beta versions will end with an odd number in the hundredths - place- because they may be odd- and continue to be marked "beta". I'll just sleep better at night. :-) - - Version 1.70beta Mon Feb 27 07:20:42 CST 2012 - Happy Birthday to me! Happy Birthday tooooo meee! Happy Birthday, Dear Meeeeee-eeeee! - Happy Birthday to me! - - Yes, it is on this auspicious occasion of mine (and Elizabeth Taylor's [R.I.P.]) birthday that I - humbly submit to you, gracious Arduino PinChangeInt user, version 1.70beta of the PinChangeInt - library. I hope you enjoy it. - - New in this release: - The PinChangeIntTest sketch was created, which can be found in the Examples directory. It exercises: - * Two interrupting pins, one on each of the Arduino's PORTs. - * detachInterrupt() (and subsequent attachInterrupt()s). - Hopefully this will help avoid the embarrassing bugs that I have heretofore missed. - - As well, it has come to this author's (GreyGnome) attention that the Serial class in Arduino 1.0 - uses an interrupt that, if you attempt to print from an interrupt (which is what I was doing in my - tests) can easily lock up the Arduino. So I have taken SigurðurOrn's excellent ByteBuffer library - and modified it for my own nefarious purposes. (see http://siggiorn.com/?p=460). The zipfile - comes complete with the ByteBuffer library; see the ByteBuffer/ByteBuffer.h file for a list of - changes, and see the PinChangeIntTest sketch for a usage scenario. Now the (interrupt-less and) - relatively fast operation of filling a circular buffer is used in the interrupt routines. The buffer - is then printed from loop(). - - The library has been modified so it can be used in other libraries, such as my AdaEncoder library - (http://code.google.com/p/adaencoder/). When #include'd by another library you should #define - the LIBCALL_PINCHANGEINT macro. For example: - #ifndef PinChangeInt_h - #define LIBCALL_PINCHANGEINT - #include "../PinChangeInt/PinChangeInt.h" - #endif - This is necessary because the IDE compiles both your sketch and the .cpp file of your library, and - the .h file is included in both places. But since the .h file actually contains the code, any variable - or function definitions would occur twice and cause compilation errors- unless #ifdef'ed out. - - Version 1.6beta Fri Feb 10 08:48:35 CST 2012 - Set the value of the current register settings, first thing in each ISR; e.g., - ISR(PCINT0_vect) { - PCintPort::curr = portB.portInputReg; // version 1.6 - ... - ...instead of at the beginning of the PCintPort::PCint() static method. This means that the port is read - closer to the beginning of the interrupt, and may be slightly more accurate- only by a couple of microseconds, - really, but it's a cheap win. - - Fixed a bug- a BUG!- in the attachInterrupt() and detachInterrupt() methods. I didn't have breaks in my - switch statements! Augh! What am I, a (UNIX) shell programmer? ...Uh, generally, yes... - - Added the PINMODE define and the PCintPort::pinmode variable. - - Version 1.51 Sun Feb 5 23:28:02 CST 2012 - Crap, a bug! Changed line 392 from this: - PCintPort::pinState=curr & changedPins ? HIGH : LOW; - to this: - PCintPort::pinState=curr & p->mask ? HIGH : LOW; - Also added a few lines of (commented-out) debug code. - - Version 1.5 Thu Feb 2 18:09:49 CST 2012 - Added the PCintPort::pinState static variable to allow the programmer to query the state of the pin - at the time of interrupt. - Added two new #defines, NO_PIN_STATE and NO_PIN_NUMBER so as to reduce the code size by 20-50 bytes, - and to speed up the interrupt routine slightly by declaring that you don't care if the static variables - PCintPort::pinState and/or PCintPort::arduinoPin are set and made available to your interrupt routine. - // #define NO_PIN_STATE // to indicate that you don't need the pinState - // #define NO_PIN_NUMBER // to indicate that you don't need the arduinoPin - - Version 1.4 Tue Jan 10 09:41:14 CST 2012 - All the code has been moved into this .h file, so as to allow #define's to work from the user's - sketch. Thanks to Paul Stoffregen from pjrc.com for the inspiration! (Check out his website for - some nice [lots more memory] Arduino-like boards at really good prices. ...This has been an unsolicited - plug. Now back to our regular programming. ...Hehe, "programming", get it?) - - As a result, we no longer use the PinChangeIntConfig.h file. The user must #define things in his/her - sketch. Which is better anyway. - - Removed the pcIntPorts[] array, which created all the ports by default no matter what. Now, only - those ports (PCintPort objects) that you need will get created if you use the NO_PORTx_PINCHANGES #defines. - This saves flash memory, and actually we get a bit of a memory savings anyway even if all the ports are - left enabled. - - The attachInterrupt and detachInterrupt routines were modified to handle the new PCintPort objects. - - Version 1.3 Sat Dec 3 22:56:20 CST 2011 - Significant internal changes: - Tested and modified to work with Arduino 1.0. - - Modified to use the new() operator and symbolic links instead of creating a pre-populated - PCintPins[]. Renamed some variables to simplify or make their meaning more obvious (IMHO anyway). - Modified the PCintPort::PCint() code (ie, the interrupt code) to loop over a linked-list. For - those who love arrays, I have left some code in there that should work to loop over an array - instead. But it is commented out in the release version. - - For Arduino versions prior to 1.0: The new() operator requires the cppfix.h library, which is - included with this package. For Arduino 1.0 and above: new.h comes with the distribution, and - that is #included. - - Version 1.2 Sat Dec 3 Sat Dec 3 09:15:52 CST 2011 - Modified Thu Sep 8 07:33:17 CDT 2011 by GreyGnome. Fixes a bug with the initial port - value. Now it sets the initial value to be the state of the port at the time of - attachInterrupt(). The line is port.PCintLast=port.portInputReg; in attachInterrupt(). - See GreyGnome comment, below. - - Added the "arduinoPin" variable, so the user's function will know exactly which pin on - the Arduino was triggered. - - Version 1.1 Sat Dec 3 00:06:03 CST 2011 - ...updated to fix the "delPin" function as per "pekka"'s bug report. Thanks! - - ---- ^^^ VERSIONS ^^^ (NOTE TO SELF: Update the PCINT_VERSION define, below) ------------- - - See google code project for latest, bugs and info http://code.google.com/p/arduino-pinchangeint/ - For more information Refer to avr-gcc header files, arduino source and atmega datasheet. - - This library was inspired by and derived from "johnboiles" (it seems) - PCInt Arduino Playground example here: http://www.arduino.cc/playground/Main/PcInt - If you are the original author, please let us know at the google code page - - It provides an extension to the interrupt support for arduino by - adding pin change interrupts, giving a way for users to have - interrupts drive off of any pin. - - This program is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . diff --git a/libraries/PinChangeInt/gpl.txt b/libraries/PinChangeInt/gpl.txt deleted file mode 100644 index 94a9ed0..0000000 --- a/libraries/PinChangeInt/gpl.txt +++ /dev/null @@ -1,674 +0,0 @@ - GNU GENERAL PUBLIC LICENSE - Version 3, 29 June 2007 - - Copyright (C) 2007 Free Software Foundation, Inc. - Everyone is permitted to copy and distribute verbatim copies - of this license document, but changing it is not allowed. - - Preamble - - The GNU General Public License is a free, copyleft license for -software and other kinds of works. - - The licenses for most software and other practical works are designed -to take away your freedom to share and change the works. By contrast, -the GNU General Public License is intended to guarantee your freedom to -share and change all versions of a program--to make sure it remains free -software for all its users. We, the Free Software Foundation, use the -GNU General Public License for most of our software; it applies also to -any other work released this way by its authors. You can apply it to -your programs, too. - - When we speak of free software, we are referring to freedom, not -price. Our General Public Licenses are designed to make sure that you -have the freedom to distribute copies of free software (and charge for -them if you wish), that you receive source code or can get it if you -want it, that you can change the software or use pieces of it in new -free programs, and that you know you can do these things. - - To protect your rights, we need to prevent others from denying you -these rights or asking you to surrender the rights. Therefore, you have -certain responsibilities if you distribute copies of the software, or if -you modify it: responsibilities to respect the freedom of others. - - For example, if you distribute copies of such a program, whether -gratis or for a fee, you must pass on to the recipients the same -freedoms that you received. You must make sure that they, too, receive -or can get the source code. And you must show them these terms so they -know their rights. - - Developers that use the GNU GPL protect your rights with two steps: -(1) assert copyright on the software, and (2) offer you this License -giving you legal permission to copy, distribute and/or modify it. - - For the developers' and authors' protection, the GPL clearly explains -that there is no warranty for this free software. For both users' and -authors' sake, the GPL requires that modified versions be marked as -changed, so that their problems will not be attributed erroneously to -authors of previous versions. - - Some devices are designed to deny users access to install or run -modified versions of the software inside them, although the manufacturer -can do so. This is fundamentally incompatible with the aim of -protecting users' freedom to change the software. The systematic -pattern of such abuse occurs in the area of products for individuals to -use, which is precisely where it is most unacceptable. Therefore, we -have designed this version of the GPL to prohibit the practice for those -products. If such problems arise substantially in other domains, we -stand ready to extend this provision to those domains in future versions -of the GPL, as needed to protect the freedom of users. - - Finally, every program is threatened constantly by software patents. -States should not allow patents to restrict development and use of -software on general-purpose computers, but in those that do, we wish to -avoid the special danger that patents applied to a free program could -make it effectively proprietary. To prevent this, the GPL assures that -patents cannot be used to render the program non-free. - - The precise terms and conditions for copying, distribution and -modification follow. - - TERMS AND CONDITIONS - - 0. Definitions. - - "This License" refers to version 3 of the GNU General Public License. - - "Copyright" also means copyright-like laws that apply to other kinds of -works, such as semiconductor masks. - - "The Program" refers to any copyrightable work licensed under this -License. Each licensee is addressed as "you". "Licensees" and -"recipients" may be individuals or organizations. - - To "modify" a work means to copy from or adapt all or part of the work -in a fashion requiring copyright permission, other than the making of an -exact copy. The resulting work is called a "modified version" of the -earlier work or a work "based on" the earlier work. - - A "covered work" means either the unmodified Program or a work based -on the Program. - - To "propagate" a work means to do anything with it that, without -permission, would make you directly or secondarily liable for -infringement under applicable copyright law, except executing it on a -computer or modifying a private copy. Propagation includes copying, -distribution (with or without modification), making available to the -public, and in some countries other activities as well. - - To "convey" a work means any kind of propagation that enables other -parties to make or receive copies. Mere interaction with a user through -a computer network, with no transfer of a copy, is not conveying. - - An interactive user interface displays "Appropriate Legal Notices" -to the extent that it includes a convenient and prominently visible -feature that (1) displays an appropriate copyright notice, and (2) -tells the user that there is no warranty for the work (except to the -extent that warranties are provided), that licensees may convey the -work under this License, and how to view a copy of this License. If -the interface presents a list of user commands or options, such as a -menu, a prominent item in the list meets this criterion. - - 1. Source Code. - - The "source code" for a work means the preferred form of the work -for making modifications to it. "Object code" means any non-source -form of a work. - - A "Standard Interface" means an interface that either is an official -standard defined by a recognized standards body, or, in the case of -interfaces specified for a particular programming language, one that -is widely used among developers working in that language. - - The "System Libraries" of an executable work include anything, other -than the work as a whole, that (a) is included in the normal form of -packaging a Major Component, but which is not part of that Major -Component, and (b) serves only to enable use of the work with that -Major Component, or to implement a Standard Interface for which an -implementation is available to the public in source code form. A -"Major Component", in this context, means a major essential component -(kernel, window system, and so on) of the specific operating system -(if any) on which the executable work runs, or a compiler used to -produce the work, or an object code interpreter used to run it. - - The "Corresponding Source" for a work in object code form means all -the source code needed to generate, install, and (for an executable -work) run the object code and to modify the work, including scripts to -control those activities. However, it does not include the work's -System Libraries, or general-purpose tools or generally available free -programs which are used unmodified in performing those activities but -which are not part of the work. For example, Corresponding Source -includes interface definition files associated with source files for -the work, and the source code for shared libraries and dynamically -linked subprograms that the work is specifically designed to require, -such as by intimate data communication or control flow between those -subprograms and other parts of the work. - - The Corresponding Source need not include anything that users -can regenerate automatically from other parts of the Corresponding -Source. - - The Corresponding Source for a work in source code form is that -same work. - - 2. Basic Permissions. - - All rights granted under this License are granted for the term of -copyright on the Program, and are irrevocable provided the stated -conditions are met. This License explicitly affirms your unlimited -permission to run the unmodified Program. The output from running a -covered work is covered by this License only if the output, given its -content, constitutes a covered work. This License acknowledges your -rights of fair use or other equivalent, as provided by copyright law. - - You may make, run and propagate covered works that you do not -convey, without conditions so long as your license otherwise remains -in force. You may convey covered works to others for the sole purpose -of having them make modifications exclusively for you, or provide you -with facilities for running those works, provided that you comply with -the terms of this License in conveying all material for which you do -not control copyright. Those thus making or running the covered works -for you must do so exclusively on your behalf, under your direction -and control, on terms that prohibit them from making any copies of -your copyrighted material outside their relationship with you. - - Conveying under any other circumstances is permitted solely under -the conditions stated below. Sublicensing is not allowed; section 10 -makes it unnecessary. - - 3. Protecting Users' Legal Rights From Anti-Circumvention Law. - - No covered work shall be deemed part of an effective technological -measure under any applicable law fulfilling obligations under article -11 of the WIPO copyright treaty adopted on 20 December 1996, or -similar laws prohibiting or restricting circumvention of such -measures. - - When you convey a covered work, you waive any legal power to forbid -circumvention of technological measures to the extent such circumvention -is effected by exercising rights under this License with respect to -the covered work, and you disclaim any intention to limit operation or -modification of the work as a means of enforcing, against the work's -users, your or third parties' legal rights to forbid circumvention of -technological measures. - - 4. Conveying Verbatim Copies. - - You may convey verbatim copies of the Program's source code as you -receive it, in any medium, provided that you conspicuously and -appropriately publish on each copy an appropriate copyright notice; -keep intact all notices stating that this License and any -non-permissive terms added in accord with section 7 apply to the code; -keep intact all notices of the absence of any warranty; and give all -recipients a copy of this License along with the Program. - - You may charge any price or no price for each copy that you convey, -and you may offer support or warranty protection for a fee. - - 5. Conveying Modified Source Versions. - - You may convey a work based on the Program, or the modifications to -produce it from the Program, in the form of source code under the -terms of section 4, provided that you also meet all of these conditions: - - a) The work must carry prominent notices stating that you modified - it, and giving a relevant date. - - b) The work must carry prominent notices stating that it is - released under this License and any conditions added under section - 7. This requirement modifies the requirement in section 4 to - "keep intact all notices". - - c) You must license the entire work, as a whole, under this - License to anyone who comes into possession of a copy. This - License will therefore apply, along with any applicable section 7 - additional terms, to the whole of the work, and all its parts, - regardless of how they are packaged. This License gives no - permission to license the work in any other way, but it does not - invalidate such permission if you have separately received it. - - d) If the work has interactive user interfaces, each must display - Appropriate Legal Notices; however, if the Program has interactive - interfaces that do not display Appropriate Legal Notices, your - work need not make them do so. - - A compilation of a covered work with other separate and independent -works, which are not by their nature extensions of the covered work, -and which are not combined with it such as to form a larger program, -in or on a volume of a storage or distribution medium, is called an -"aggregate" if the compilation and its resulting copyright are not -used to limit the access or legal rights of the compilation's users -beyond what the individual works permit. Inclusion of a covered work -in an aggregate does not cause this License to apply to the other -parts of the aggregate. - - 6. Conveying Non-Source Forms. - - You may convey a covered work in object code form under the terms -of sections 4 and 5, provided that you also convey the -machine-readable Corresponding Source under the terms of this License, -in one of these ways: - - a) Convey the object code in, or embodied in, a physical product - (including a physical distribution medium), accompanied by the - Corresponding Source fixed on a durable physical medium - customarily used for software interchange. - - b) Convey the object code in, or embodied in, a physical product - (including a physical distribution medium), accompanied by a - written offer, valid for at least three years and valid for as - long as you offer spare parts or customer support for that product - model, to give anyone who possesses the object code either (1) a - copy of the Corresponding Source for all the software in the - product that is covered by this License, on a durable physical - medium customarily used for software interchange, for a price no - more than your reasonable cost of physically performing this - conveying of source, or (2) access to copy the - Corresponding Source from a network server at no charge. - - c) Convey individual copies of the object code with a copy of the - written offer to provide the Corresponding Source. This - alternative is allowed only occasionally and noncommercially, and - only if you received the object code with such an offer, in accord - with subsection 6b. - - d) Convey the object code by offering access from a designated - place (gratis or for a charge), and offer equivalent access to the - Corresponding Source in the same way through the same place at no - further charge. You need not require recipients to copy the - Corresponding Source along with the object code. If the place to - copy the object code is a network server, the Corresponding Source - may be on a different server (operated by you or a third party) - that supports equivalent copying facilities, provided you maintain - clear directions next to the object code saying where to find the - Corresponding Source. Regardless of what server hosts the - Corresponding Source, you remain obligated to ensure that it is - available for as long as needed to satisfy these requirements. - - e) Convey the object code using peer-to-peer transmission, provided - you inform other peers where the object code and Corresponding - Source of the work are being offered to the general public at no - charge under subsection 6d. - - A separable portion of the object code, whose source code is excluded -from the Corresponding Source as a System Library, need not be -included in conveying the object code work. - - A "User Product" is either (1) a "consumer product", which means any -tangible personal property which is normally used for personal, family, -or household purposes, or (2) anything designed or sold for incorporation -into a dwelling. In determining whether a product is a consumer product, -doubtful cases shall be resolved in favor of coverage. For a particular -product received by a particular user, "normally used" refers to a -typical or common use of that class of product, regardless of the status -of the particular user or of the way in which the particular user -actually uses, or expects or is expected to use, the product. A product -is a consumer product regardless of whether the product has substantial -commercial, industrial or non-consumer uses, unless such uses represent -the only significant mode of use of the product. - - "Installation Information" for a User Product means any methods, -procedures, authorization keys, or other information required to install -and execute modified versions of a covered work in that User Product from -a modified version of its Corresponding Source. The information must -suffice to ensure that the continued functioning of the modified object -code is in no case prevented or interfered with solely because -modification has been made. - - If you convey an object code work under this section in, or with, or -specifically for use in, a User Product, and the conveying occurs as -part of a transaction in which the right of possession and use of the -User Product is transferred to the recipient in perpetuity or for a -fixed term (regardless of how the transaction is characterized), the -Corresponding Source conveyed under this section must be accompanied -by the Installation Information. But this requirement does not apply -if neither you nor any third party retains the ability to install -modified object code on the User Product (for example, the work has -been installed in ROM). - - The requirement to provide Installation Information does not include a -requirement to continue to provide support service, warranty, or updates -for a work that has been modified or installed by the recipient, or for -the User Product in which it has been modified or installed. Access to a -network may be denied when the modification itself materially and -adversely affects the operation of the network or violates the rules and -protocols for communication across the network. - - Corresponding Source conveyed, and Installation Information provided, -in accord with this section must be in a format that is publicly -documented (and with an implementation available to the public in -source code form), and must require no special password or key for -unpacking, reading or copying. - - 7. Additional Terms. - - "Additional permissions" are terms that supplement the terms of this -License by making exceptions from one or more of its conditions. -Additional permissions that are applicable to the entire Program shall -be treated as though they were included in this License, to the extent -that they are valid under applicable law. If additional permissions -apply only to part of the Program, that part may be used separately -under those permissions, but the entire Program remains governed by -this License without regard to the additional permissions. - - When you convey a copy of a covered work, you may at your option -remove any additional permissions from that copy, or from any part of -it. (Additional permissions may be written to require their own -removal in certain cases when you modify the work.) You may place -additional permissions on material, added by you to a covered work, -for which you have or can give appropriate copyright permission. - - Notwithstanding any other provision of this License, for material you -add to a covered work, you may (if authorized by the copyright holders of -that material) supplement the terms of this License with terms: - - a) Disclaiming warranty or limiting liability differently from the - terms of sections 15 and 16 of this License; or - - b) Requiring preservation of specified reasonable legal notices or - author attributions in that material or in the Appropriate Legal - Notices displayed by works containing it; or - - c) Prohibiting misrepresentation of the origin of that material, or - requiring that modified versions of such material be marked in - reasonable ways as different from the original version; or - - d) Limiting the use for publicity purposes of names of licensors or - authors of the material; or - - e) Declining to grant rights under trademark law for use of some - trade names, trademarks, or service marks; or - - f) Requiring indemnification of licensors and authors of that - material by anyone who conveys the material (or modified versions of - it) with contractual assumptions of liability to the recipient, for - any liability that these contractual assumptions directly impose on - those licensors and authors. - - All other non-permissive additional terms are considered "further -restrictions" within the meaning of section 10. If the Program as you -received it, or any part of it, contains a notice stating that it is -governed by this License along with a term that is a further -restriction, you may remove that term. If a license document contains -a further restriction but permits relicensing or conveying under this -License, you may add to a covered work material governed by the terms -of that license document, provided that the further restriction does -not survive such relicensing or conveying. - - If you add terms to a covered work in accord with this section, you -must place, in the relevant source files, a statement of the -additional terms that apply to those files, or a notice indicating -where to find the applicable terms. - - Additional terms, permissive or non-permissive, may be stated in the -form of a separately written license, or stated as exceptions; -the above requirements apply either way. - - 8. Termination. - - You may not propagate or modify a covered work except as expressly -provided under this License. Any attempt otherwise to propagate or -modify it is void, and will automatically terminate your rights under -this License (including any patent licenses granted under the third -paragraph of section 11). - - However, if you cease all violation of this License, then your -license from a particular copyright holder is reinstated (a) -provisionally, unless and until the copyright holder explicitly and -finally terminates your license, and (b) permanently, if the copyright -holder fails to notify you of the violation by some reasonable means -prior to 60 days after the cessation. - - Moreover, your license from a particular copyright holder is -reinstated permanently if the copyright holder notifies you of the -violation by some reasonable means, this is the first time you have -received notice of violation of this License (for any work) from that -copyright holder, and you cure the violation prior to 30 days after -your receipt of the notice. - - Termination of your rights under this section does not terminate the -licenses of parties who have received copies or rights from you under -this License. If your rights have been terminated and not permanently -reinstated, you do not qualify to receive new licenses for the same -material under section 10. - - 9. Acceptance Not Required for Having Copies. - - You are not required to accept this License in order to receive or -run a copy of the Program. Ancillary propagation of a covered work -occurring solely as a consequence of using peer-to-peer transmission -to receive a copy likewise does not require acceptance. However, -nothing other than this License grants you permission to propagate or -modify any covered work. These actions infringe copyright if you do -not accept this License. Therefore, by modifying or propagating a -covered work, you indicate your acceptance of this License to do so. - - 10. Automatic Licensing of Downstream Recipients. - - Each time you convey a covered work, the recipient automatically -receives a license from the original licensors, to run, modify and -propagate that work, subject to this License. You are not responsible -for enforcing compliance by third parties with this License. - - An "entity transaction" is a transaction transferring control of an -organization, or substantially all assets of one, or subdividing an -organization, or merging organizations. If propagation of a covered -work results from an entity transaction, each party to that -transaction who receives a copy of the work also receives whatever -licenses to the work the party's predecessor in interest had or could -give under the previous paragraph, plus a right to possession of the -Corresponding Source of the work from the predecessor in interest, if -the predecessor has it or can get it with reasonable efforts. - - You may not impose any further restrictions on the exercise of the -rights granted or affirmed under this License. For example, you may -not impose a license fee, royalty, or other charge for exercise of -rights granted under this License, and you may not initiate litigation -(including a cross-claim or counterclaim in a lawsuit) alleging that -any patent claim is infringed by making, using, selling, offering for -sale, or importing the Program or any portion of it. - - 11. Patents. - - A "contributor" is a copyright holder who authorizes use under this -License of the Program or a work on which the Program is based. The -work thus licensed is called the contributor's "contributor version". - - A contributor's "essential patent claims" are all patent claims -owned or controlled by the contributor, whether already acquired or -hereafter acquired, that would be infringed by some manner, permitted -by this License, of making, using, or selling its contributor version, -but do not include claims that would be infringed only as a -consequence of further modification of the contributor version. For -purposes of this definition, "control" includes the right to grant -patent sublicenses in a manner consistent with the requirements of -this License. - - Each contributor grants you a non-exclusive, worldwide, royalty-free -patent license under the contributor's essential patent claims, to -make, use, sell, offer for sale, import and otherwise run, modify and -propagate the contents of its contributor version. - - In the following three paragraphs, a "patent license" is any express -agreement or commitment, however denominated, not to enforce a patent -(such as an express permission to practice a patent or covenant not to -sue for patent infringement). To "grant" such a patent license to a -party means to make such an agreement or commitment not to enforce a -patent against the party. - - If you convey a covered work, knowingly relying on a patent license, -and the Corresponding Source of the work is not available for anyone -to copy, free of charge and under the terms of this License, through a -publicly available network server or other readily accessible means, -then you must either (1) cause the Corresponding Source to be so -available, or (2) arrange to deprive yourself of the benefit of the -patent license for this particular work, or (3) arrange, in a manner -consistent with the requirements of this License, to extend the patent -license to downstream recipients. "Knowingly relying" means you have -actual knowledge that, but for the patent license, your conveying the -covered work in a country, or your recipient's use of the covered work -in a country, would infringe one or more identifiable patents in that -country that you have reason to believe are valid. - - If, pursuant to or in connection with a single transaction or -arrangement, you convey, or propagate by procuring conveyance of, a -covered work, and grant a patent license to some of the parties -receiving the covered work authorizing them to use, propagate, modify -or convey a specific copy of the covered work, then the patent license -you grant is automatically extended to all recipients of the covered -work and works based on it. - - A patent license is "discriminatory" if it does not include within -the scope of its coverage, prohibits the exercise of, or is -conditioned on the non-exercise of one or more of the rights that are -specifically granted under this License. You may not convey a covered -work if you are a party to an arrangement with a third party that is -in the business of distributing software, under which you make payment -to the third party based on the extent of your activity of conveying -the work, and under which the third party grants, to any of the -parties who would receive the covered work from you, a discriminatory -patent license (a) in connection with copies of the covered work -conveyed by you (or copies made from those copies), or (b) primarily -for and in connection with specific products or compilations that -contain the covered work, unless you entered into that arrangement, -or that patent license was granted, prior to 28 March 2007. - - Nothing in this License shall be construed as excluding or limiting -any implied license or other defenses to infringement that may -otherwise be available to you under applicable patent law. - - 12. No Surrender of Others' Freedom. - - If conditions are imposed on you (whether by court order, agreement or -otherwise) that contradict the conditions of this License, they do not -excuse you from the conditions of this License. If you cannot convey a -covered work so as to satisfy simultaneously your obligations under this -License and any other pertinent obligations, then as a consequence you may -not convey it at all. For example, if you agree to terms that obligate you -to collect a royalty for further conveying from those to whom you convey -the Program, the only way you could satisfy both those terms and this -License would be to refrain entirely from conveying the Program. - - 13. Use with the GNU Affero General Public License. - - Notwithstanding any other provision of this License, you have -permission to link or combine any covered work with a work licensed -under version 3 of the GNU Affero General Public License into a single -combined work, and to convey the resulting work. The terms of this -License will continue to apply to the part which is the covered work, -but the special requirements of the GNU Affero General Public License, -section 13, concerning interaction through a network will apply to the -combination as such. - - 14. Revised Versions of this License. - - The Free Software Foundation may publish revised and/or new versions of -the GNU General Public License from time to time. Such new versions will -be similar in spirit to the present version, but may differ in detail to -address new problems or concerns. - - Each version is given a distinguishing version number. If the -Program specifies that a certain numbered version of the GNU General -Public License "or any later version" applies to it, you have the -option of following the terms and conditions either of that numbered -version or of any later version published by the Free Software -Foundation. If the Program does not specify a version number of the -GNU General Public License, you may choose any version ever published -by the Free Software Foundation. - - If the Program specifies that a proxy can decide which future -versions of the GNU General Public License can be used, that proxy's -public statement of acceptance of a version permanently authorizes you -to choose that version for the Program. - - Later license versions may give you additional or different -permissions. However, no additional obligations are imposed on any -author or copyright holder as a result of your choosing to follow a -later version. - - 15. Disclaimer of Warranty. - - THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY -APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT -HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY -OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, -THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR -PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM -IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF -ALL NECESSARY SERVICING, REPAIR OR CORRECTION. - - 16. Limitation of Liability. - - IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING -WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS -THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY -GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE -USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF -DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD -PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), -EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF -SUCH DAMAGES. - - 17. Interpretation of Sections 15 and 16. - - If the disclaimer of warranty and limitation of liability provided -above cannot be given local legal effect according to their terms, -reviewing courts shall apply local law that most closely approximates -an absolute waiver of all civil liability in connection with the -Program, unless a warranty or assumption of liability accompanies a -copy of the Program in return for a fee. - - END OF TERMS AND CONDITIONS - - How to Apply These Terms to Your New Programs - - If you develop a new program, and you want it to be of the greatest -possible use to the public, the best way to achieve this is to make it -free software which everyone can redistribute and change under these terms. - - To do so, attach the following notices to the program. It is safest -to attach them to the start of each source file to most effectively -state the exclusion of warranty; and each file should have at least -the "copyright" line and a pointer to where the full notice is found. - - - Copyright (C) - - This program is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . - -Also add information on how to contact you by electronic and paper mail. - - If the program does terminal interaction, make it output a short -notice like this when it starts in an interactive mode: - - Copyright (C) - This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. - This is free software, and you are welcome to redistribute it - under certain conditions; type `show c' for details. - -The hypothetical commands `show w' and `show c' should show the appropriate -parts of the General Public License. Of course, your program's commands -might be different; for a GUI interface, you would use an "about box". - - You should also get your employer (if you work as a programmer) or school, -if any, to sign a "copyright disclaimer" for the program, if necessary. -For more information on this, and how to apply and follow the GNU GPL, see -. - - The GNU General Public License does not permit incorporating your program -into proprietary programs. If your program is a subroutine library, you -may consider it more useful to permit linking proprietary applications with -the library. If this is what you want to do, use the GNU Lesser General -Public License instead of this License. But first, please read -. diff --git a/libraries/PinChangeInt/keywords.txt b/libraries/PinChangeInt/keywords.txt deleted file mode 100644 index 24e1cec..0000000 --- a/libraries/PinChangeInt/keywords.txt +++ /dev/null @@ -1,10 +0,0 @@ -# LITERAL1 specifies constants - -# KEYWORD1 specifies datatypes and C/C++ keywords -pinState KEYWORD1 PinState -arduinoPin KEYWORD1 ArduinoPin -PCintPort KEYWORD1 PCInterruptPort - -# KEYWORD2 specifies methods and functions -attachInterrupt KEYWORD2 AttachInterrupt -detachInterrupt KEYWORD2 DetachInterrupt