Reshuffle arch files (#974)

MySensors.h

@@ -41,34 +41,40 @@
 #include <Arduino.h>
 #endif
 
+// general macros
+#if !defined(_BV)
+#define _BV(x) (1<<(x))	//!< _BV
+#endif
+
 #include "MyConfig.h"
 #include "core/MySplashScreen.h"
 #include "core/MySensorsCore.h"
 
-// OTA Debug, have to defined before HAL
+// OTA Debug, has to be defined before HAL
 #if defined(MY_OTA_LOG_SENDER_FEATURE) || defined(MY_OTA_LOG_RECEIVER_FEATURE)
 #include "core/MyOTALogging.h"
 #endif
 
 // HARDWARE
+#include "hal/architecture/MyHw.h"
 #if defined(ARDUINO_ARCH_ESP8266)
-#include "hal/architecture/MyHwESP8266.cpp"
+#include "hal/architecture/ESP8266/MyHwESP8266.cpp"
 #elif defined(ARDUINO_ARCH_AVR)
 #include "drivers/AVR/DigitalWriteFast/digitalWriteFast.h"
-#include "hal/architecture/MyHwAVR.cpp"
+#include "hal/architecture/AVR/MyHwAVR.cpp"
 #elif defined(ARDUINO_ARCH_SAMD)
 #include "drivers/extEEPROM/extEEPROM.cpp"
-#include "hal/architecture/MyHwSAMD.cpp"
+#include "hal/architecture/SAMD/MyHwSAMD.cpp"
 #elif defined(ARDUINO_ARCH_STM32F1)
-#include "hal/architecture/MyHwSTM32F1.cpp"
+#include "hal/architecture/STM32F1/MyHwSTM32F1.cpp"
 #elif defined(ARDUINO_ARCH_NRF5) || defined(ARDUINO_ARCH_NRF52)
 #include "drivers/NVM/VirtualPage.cpp"
 #include "drivers/NVM/NVRAM.cpp"
-#include "hal/architecture/MyHwNRF5.cpp"
+#include "hal/architecture/NRF5/MyHwNRF5.cpp"
 #elif defined(__arm__) && defined(TEENSYDUINO)
-#include "hal/architecture/MyHwTeensy3.cpp"
+#include "hal/architecture/Teensy3/MyHwTeensy3.cpp"
 #elif defined(__linux__)
-#include "hal/architecture/MyHwLinuxGeneric.cpp"
+#include "hal/architecture/Linux/MyHwLinuxGeneric.cpp"
 #endif
 
 // OTA Debug second part, depends on HAL
@@ -130,7 +136,7 @@ MY_DEFAULT_RX_LED_PIN in your sketch instead to enable LEDs
 
 // GATEWAY - TRANSPORT
 #if defined(MY_CONTROLLER_IP_ADDRESS) || defined(MY_CONTROLLER_URL_ADDRESS)
-#define MY_GATEWAY_CLIENT_MODE
+#define MY_GATEWAY_CLIENT_MODE	//!< gateway client mode
 #endif
 
 #if defined(MY_USE_UDP) && !defined(MY_GATEWAY_CLIENT_MODE)
@@ -248,7 +254,7 @@ MY_DEFAULT_RX_LED_PIN in your sketch instead to enable LEDs
 
 // SANITY CHECK
 #if defined(MY_REPEATER_FEATURE) || defined(MY_GATEWAY_FEATURE)
-#define MY_TRANSPORT_SANITY_CHECK
+#define MY_TRANSPORT_SANITY_CHECK		//!< enable regular transport sanity checks
 #endif
 
 // TRANSPORT INCLUDES
@@ -268,7 +274,7 @@ MY_DEFAULT_RX_LED_PIN in your sketch instead to enable LEDs
 // RAM ROUTING TABLE
 #if defined(MY_RAM_ROUTING_TABLE_FEATURE) && defined(MY_REPEATER_FEATURE)
 // activate feature based on architecture
-#if defined(ARDUINO_ARCH_ESP8266) || defined(ARDUINO_ARCH_SAMD) || defined(ARDUINO_ARCH_NRF5) || defined(__linux__)
+#if defined(ARDUINO_ARCH_ESP8266) || defined(ARDUINO_ARCH_SAMD) || defined(ARDUINO_ARCH_NRF5) || defined(ARDUINO_ARCH_STM32F1) || defined(TEENSYDUINO) || defined(__linux__)
 #define MY_RAM_ROUTING_TABLE_ENABLED
 #elif defined(ARDUINO_ARCH_AVR)
 #if defined(__avr_atmega1280__) || defined(__avr_atmega1284__) || defined(__avr_atmega2560__)
@@ -306,7 +312,7 @@ MY_DEFAULT_RX_LED_PIN in your sketch instead to enable LEDs
 #include "drivers/RF24/RF24.cpp"
 #include "hal/transport/MyTransportRF24.cpp"
 #elif defined(MY_RADIO_NRF5_ESB)
-#if  !defined(ARDUINO_ARCH_NRF5)
+#if !defined(ARDUINO_ARCH_NRF5)
 #error No support for nRF5 radio on this platform
 #endif
 #if defined(MY_NRF5_ESB_ENABLE_ENCRYPTION)
@@ -382,16 +388,20 @@ MY_DEFAULT_RX_LED_PIN in your sketch instead to enable LEDs
 
 // HW mains
 #if !defined(MY_CORE_ONLY)
-#if defined(ARDUINO_ARCH_ESP8266)
+#if defined(ARDUINO_ARCH_AVR)
-#include "hal/architecture/MyMainESP8266.cpp"
+#include "hal/architecture/AVR/MyMainAVR.cpp"
+#elif defined(ARDUINO_ARCH_SAMD)
+#include "hal/architecture/SAMD/MyMainSAMD.cpp"
+#elif defined(ARDUINO_ARCH_ESP8266)
+#include "hal/architecture/ESP8266/MyMainESP8266.cpp"
+#elif defined(ARDUINO_ARCH_NRF5)
+#include "hal/architecture/NRF5/MyMainNRF5.cpp"
 #elif defined(__linux__)
-#include "hal/architecture/MyMainLinux.cpp"
+#include "hal/architecture/Linux/MyMainLinux.cpp"
 #elif defined(ARDUINO_ARCH_STM32F1)
-#include "hal/architecture/MyMainSTM32F1.cpp"
+#include "hal/architecture/STM32F1/MyMainSTM32F1.cpp"
 #elif defined(TEENSYDUINO)
-#include "hal/architecture/MyMainTeensy3.cpp"
+#include "hal/architecture/Teensy3/MyMainTeensy3.cpp"
-#else
-#include "hal/architecture/MyMainDefault.cpp"
 #endif
 #endif
 

drivers/NRF5/Radio_ESB.cpp

@@ -21,7 +21,7 @@
 
 #include "Radio.h"
 #include "Radio_ESB.h"
-#include "hal/architecture/MyHwNRF5.h"
+#include "hal/architecture/NRF5/MyHwNRF5.h"
 #include "drivers/CircularBuffer/CircularBuffer.h"
 #include <stdio.h>
 

drivers/RF24/RF24.h

@@ -105,10 +105,6 @@ _SPI;
 #include <stdio.h>
 #include <string.h>
 
-#if !defined(_BV)
-#define _BV(x) (1<<(x))		//!< _BV()
-#endif
-
 #if defined(__arm__) || defined(__linux__)
 #include <SPI.h>
 #else

hal/architecture/AVR/MyHwAVR.h

@@ -1,4 +1,4 @@
-/*
+/*
  * The MySensors Arduino library handles the wireless radio link and protocol
  * between your home built sensors/actuators and HA controller of choice.
  * The sensors forms a self healing radio network with optional repeaters. Each
@@ -20,7 +20,6 @@
 #ifndef MyHwAVR_h
 #define MyHwAVR_h
 
-#include "MyHw.h"
 #include <avr/eeprom.h>
 #include <avr/pgmspace.h>
 #include <avr/sleep.h>

hal/architecture/AVR/MyMainAVR.cpp

@@ -0,0 +1,39 @@
+/*
+ * The MySensors Arduino library handles the wireless radio link and protocol
+ * between your home built sensors/actuators and HA controller of choice.
+ * The sensors forms a self healing radio network with optional repeaters. Each
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
+ * network topology allowing messages to be routed to nodes.
+ *
+ * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
+ * Copyright (C) 2013-2017 Sensnology AB
+ * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
+ *
+ * Documentation: http://www.mysensors.org
+ * Support Forum: http://forum.mysensors.org
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+// Initialize library and handle sketch functions like we want to
+
+int main(void)
+{
+	init();
+#if defined(USBCON)
+	USBDevice.attach();
+#endif
+	_begin(); // Startup MySensors library
+	for(;;) {
+		_process();  // Process incoming data
+		if (loop) {
+			loop(); // Call sketch loop
+		}
+		if (serialEventRun) {
+			serialEventRun();
+		}
+	}
+	return 0;
+}

hal/architecture/ESP8266/MyHwESP8266.h

@@ -1,4 +1,4 @@
-/*
+/*
  * The MySensors Arduino library handles the wireless radio link and protocol
  * between your home built sensors/actuators and HA controller of choice.
  * The sensors forms a self healing radio network with optional repeaters. Each
@@ -19,8 +19,6 @@
 #ifndef MyHwESP8266_h
 #define MyHwESP8266_h
 
-#include "MyHw.h"
-
 #ifdef __cplusplus
 #include <Arduino.h>
 #endif

hal/architecture/Linux/MyHwLinuxGeneric.h

@@ -22,7 +22,6 @@
 
 #include <cstdlib>
 #include <pthread.h>
-#include "MyHw.h"
 #include "SerialPort.h"
 #include "SerialSimulator.h"
 

hal/architecture/NRF5/MyHwNRF5.h

@@ -1,4 +1,4 @@
-/**
+/**
  * The MySensors Arduino library handles the wireless radio link and protocol
  * between your home built sensors/actuators and HA controller of choice.
  * The sensors forms a self healing radio network with optional repeaters. Each
@@ -22,8 +22,6 @@
 #ifndef MyHwNRF5_h
 #define MyHwNRF5_h
 
-#include "MyHw.h"
-
 #ifdef __cplusplus
 #include <Arduino.h>
 #endif

hal/architecture/NRF5/MyMainNRF5.cpp

@@ -0,0 +1,39 @@
+/*
+ * The MySensors Arduino library handles the wireless radio link and protocol
+ * between your home built sensors/actuators and HA controller of choice.
+ * The sensors forms a self healing radio network with optional repeaters. Each
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
+ * network topology allowing messages to be routed to nodes.
+ *
+ * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
+ * Copyright (C) 2013-2017 Sensnology AB
+ * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
+ *
+ * Documentation: http://www.mysensors.org
+ * Support Forum: http://forum.mysensors.org
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+// Initialize library and handle sketch functions like we want to
+
+int main(void)
+{
+	init();
+#if defined(USBCON)
+	USBDevice.attach();
+#endif
+	_begin(); // Startup MySensors library
+	for(;;) {
+		_process();  // Process incoming data
+		if (loop) {
+			loop(); // Call sketch loop
+		}
+		if (serialEventRun) {
+			serialEventRun();
+		}
+	}
+	return 0;
+}

hal/architecture/SAMD/MyHwSAMD.h

@@ -1,4 +1,4 @@
-/*
+/*
  * The MySensors Arduino library handles the wireless radio link and protocol
  * between your home built sensors/actuators and HA controller of choice.
  * The sensors forms a self healing radio network with optional repeaters. Each
@@ -19,8 +19,6 @@
 #ifndef MyHwSAMD_h
 #define MyHwSAMD_h
 
-#include "MyHw.h"
-
 #ifdef __cplusplus
 #include <Arduino.h>
 #endif

hal/architecture/SAMD/MyMainSAMD.cpp

@@ -1,4 +1,4 @@
-/*
+/*
  * The MySensors Arduino library handles the wireless radio link and protocol
  * between your home built sensors/actuators and HA controller of choice.
  * The sensors forms a self healing radio network with optional repeaters. Each
@@ -25,14 +25,11 @@ int main(void)
 {
 	init();
 #if defined(USBCON)
-#if defined(ARDUINO_ARCH_SAMD)
 	__libc_init_array();
 	USBDevice.init();
-#endif
 	USBDevice.attach();
 #endif
 	_begin(); // Startup MySensors library
-
 	for(;;) {
 		_process();  // Process incoming data
 		if (loop) {

hal/architecture/STM32F1/MyHwSTM32F1.h

@@ -20,8 +20,6 @@
 #ifndef MyHwSTM32F1_h
 #define MyHwSTM32F1_h
 
-#include "MyHw.h"
-
 #include <libmaple/iwdg.h>
 #include <itoa.h>
 #include <EEPROM.h>

hal/architecture/Teensy3/MyHwTeensy3.h

@@ -1,4 +1,4 @@
-/**
+/**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
@@ -28,7 +28,6 @@
 #ifndef MyHwTeensy3_h
 #define MyHwTeensy3_h
 
-#include "MyHw.h"
 #ifdef __cplusplus
 #include <Arduino.h>
 #endif