MySmartHome/MySensors
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Bringing back AVR specific code, for time critical operations

Browse Source
This commit is contained in:
Thomas Mørch
2015-12-10 17:11:37 +01:00
parent 9ba8a9ba99
commit e2f45251a0
2 changed files with 57 additions and 24 deletions
Download Patch File Download Diff File Expand all files Collapse all files
libraries/sha204/sha204_library.cpp
+39 -24
View File
@@ -5,11 +5,25 @@
// atsha204Class Constructor
// Feed this function the Arduino-ized pin number you want to assign to the ATSHA204's SDA pin
// This will find the DDRX, PORTX, and PINX registrs it'll need to point to to control that pin
// For AVR ARCH, this will find the DDRX, PORTX, and PINX registrs it'll need to point to to control that pin
// As well as the bit value for each of those registers
// For others it will only store the pin number which is used in subsequent functions
atsha204Class::atsha204Class(uint8_t pin)
{
device_pin = pin; // Find the bit value of the pin
#if defined(ARDUINO_ARCH_AVR)
device_pin = digitalPinToBitMask(pin); // Find the bit value of the pin
uint8_t port = digitalPinToPort(pin); // temoporarily used to get the next three registers
// Point to data direction register port of pin
device_port_DDR = portModeRegister(port);
// Point to output register of pin
device_port_OUT = portOutputRegister(port);
// Point to input register of pin
device_port_IN = portInputRegister(port);
#else
device_pin = pin;
#endif
}
/* Puts a the ATSHA204's unique, 4-byte serial number in the response array
@@ -73,12 +87,14 @@ uint16_t atsha204Class::calculateAndUpdateCrc(uint8_t length, uint8_t *data, uin
void atsha204Class::swi_set_signal_pin(uint8_t is_high)
{
pinMode(device_pin, OUTPUT);
SHA204_SET_OUTPUT();
if (is_high) {
SHA204_SET_HIGH();
}
else {
SHA204_SET_LOW();
}
if (is_high)
digitalWrite(device_pin, HIGH);
else
digitalWrite(device_pin, LOW);
}
uint8_t atsha204Class::swi_send_bytes(uint8_t count, uint8_t *buffer)
@@ -89,9 +105,8 @@ uint8_t atsha204Class::swi_send_bytes(uint8_t count, uint8_t *buffer)
noInterrupts(); //swi_disable_interrupts();
// Set signal pin as output.
pinMode(device_pin, OUTPUT);
digitalWrite(device_pin, HIGH);
SHA204_SET_HIGH();
SHA204_SET_OUTPUT();
// Wait turn around time.
delayMicroseconds(RX_TX_DELAY); //RX_TX_DELAY;
@@ -101,22 +116,22 @@ uint8_t atsha204Class::swi_send_bytes(uint8_t count, uint8_t *buffer)
{
if (bit_mask & buffer[i])
{
digitalWrite(device_pin, LOW);
SHA204_SET_LOW();
delayMicroseconds(BIT_DELAY); //BIT_DELAY_1;
digitalWrite(device_pin, HIGH);
SHA204_SET_HIGH();
delayMicroseconds(7*BIT_DELAY); //BIT_DELAY_7;
}
else
{
// Send a zero bit.
digitalWrite(device_pin, LOW);
SHA204_SET_LOW();
delayMicroseconds(BIT_DELAY); //BIT_DELAY_1;
digitalWrite(device_pin, HIGH);
SHA204_SET_HIGH();
delayMicroseconds(BIT_DELAY); //BIT_DELAY_1;
digitalWrite(device_pin, LOW);
SHA204_SET_LOW();
delayMicroseconds(BIT_DELAY); //BIT_DELAY_1;
digitalWrite(device_pin, HIGH);
delayMicroseconds(5*BIT_DELAY); //BIT_DELAY_5;
SHA204_SET_HIGH();
delayMicroseconds(5*BIT_DELAY); //BIT_DELAY_5;
}
}
}
@@ -140,9 +155,9 @@ uint8_t atsha204Class::swi_receive_bytes(uint8_t count, uint8_t *buffer)
// Disable interrupts while receiving.
noInterrupts(); //swi_disable_interrupts();
// Configure signal pin as input.
pinMode(device_pin,INPUT);
// Configure signal pin as input
SHA204_SET_INPUT();
// Receive bits and store in buffer.
for (i = 0; i < count; i++)
{
@@ -159,7 +174,7 @@ uint8_t atsha204Class::swi_receive_bytes(uint8_t count, uint8_t *buffer)
while (--timeout_count > 0)
{
// Wait for falling edge.
if (digitalRead(device_pin) == 0)
if (SHA204_READ_PIN() == 0)
break;
}
@@ -172,7 +187,7 @@ uint8_t atsha204Class::swi_receive_bytes(uint8_t count, uint8_t *buffer)
do
{
// Wait for rising edge.
if (digitalRead(device_pin) != 0)
if (SHA204_READ_PIN() != 0)
{
// For an Atmel microcontroller this might be faster than "pulse_count++".
pulse_count = 1;
@@ -195,7 +210,7 @@ uint8_t atsha204Class::swi_receive_bytes(uint8_t count, uint8_t *buffer)
// Detect possible edge indicating zero bit.
do
{
if (digitalRead(device_pin) == 0)
if (SHA204_READ_PIN() == 0)
{
// For an Atmel microcontroller this might be faster than "pulse_count++".
pulse_count = 2;
@@ -209,7 +224,7 @@ uint8_t atsha204Class::swi_receive_bytes(uint8_t count, uint8_t *buffer)
{
do
{
if (digitalRead(device_pin) != 0)
if (SHA204_READ_PIN() != 0)
break;
} while (timeout_count-- > 0);
}