diff --git a/hardware/MySensors/samd/libraries/Ethernet/src/Ethernet.cpp b/hardware/MySensors/samd/libraries/Ethernet/src/Ethernet.cpp
index 54cf8d6..cf4f612 100644
--- a/hardware/MySensors/samd/libraries/Ethernet/src/Ethernet.cpp
+++ b/hardware/MySensors/samd/libraries/Ethernet/src/Ethernet.cpp
@@ -16,10 +16,10 @@ int EthernetClass::begin(uint8_t *mac_address, unsigned long timeout, unsigned l
 
   // Initialise the basic info
   W5100.init();
-  SPI.beginTransaction(SPI_ETHERNET_SETTINGS);
+  SPI_ETH.beginTransaction(SPI_ETHERNET_SETTINGS);
   W5100.setMACAddress(mac_address);
   W5100.setIPAddress(IPAddress(0,0,0,0).raw_address());
-  SPI.endTransaction();
+  SPI_ETH.endTransaction();
 
   // Now try to get our config info from a DHCP server
   int ret = _dhcp->beginWithDHCP(mac_address, timeout, responseTimeout);
@@ -27,11 +27,11 @@ int EthernetClass::begin(uint8_t *mac_address, unsigned long timeout, unsigned l
   {
     // We've successfully found a DHCP server and got our configuration info, so set things
     // accordingly
-    SPI.beginTransaction(SPI_ETHERNET_SETTINGS);
+    SPI_ETH.beginTransaction(SPI_ETHERNET_SETTINGS);
     W5100.setIPAddress(_dhcp->getLocalIp().raw_address());
     W5100.setGatewayIp(_dhcp->getGatewayIp().raw_address());
     W5100.setSubnetMask(_dhcp->getSubnetMask().raw_address());
-    SPI.endTransaction();
+    SPI_ETH.endTransaction();
     _dnsServerAddress = _dhcp->getDnsServerIp();
   }
 
@@ -65,12 +65,12 @@ void EthernetClass::begin(uint8_t *mac_address, IPAddress local_ip, IPAddress dn
 void EthernetClass::begin(uint8_t *mac, IPAddress local_ip, IPAddress dns_server, IPAddress gateway, IPAddress subnet)
 {
   W5100.init();
-  SPI.beginTransaction(SPI_ETHERNET_SETTINGS);
+  SPI_ETH.beginTransaction(SPI_ETHERNET_SETTINGS);
   W5100.setMACAddress(mac);
   W5100.setIPAddress(local_ip.raw_address());
   W5100.setGatewayIp(gateway.raw_address());
   W5100.setSubnetMask(subnet.raw_address());
-  SPI.endTransaction();
+  SPI_ETH.endTransaction();
   _dnsServerAddress = dns_server;
 }
 
@@ -86,11 +86,11 @@ int EthernetClass::maintain(){
       case DHCP_CHECK_RENEW_OK:
       case DHCP_CHECK_REBIND_OK:
         //we might have got a new IP.
-        SPI.beginTransaction(SPI_ETHERNET_SETTINGS);
+        SPI_ETH.beginTransaction(SPI_ETHERNET_SETTINGS);
         W5100.setIPAddress(_dhcp->getLocalIp().raw_address());
         W5100.setGatewayIp(_dhcp->getGatewayIp().raw_address());
         W5100.setSubnetMask(_dhcp->getSubnetMask().raw_address());
-        SPI.endTransaction();
+        SPI_ETH.endTransaction();
         _dnsServerAddress = _dhcp->getDnsServerIp();
         break;
       default:
@@ -104,27 +104,27 @@ int EthernetClass::maintain(){
 IPAddress EthernetClass::localIP()
 {
   IPAddress ret;
-  SPI.beginTransaction(SPI_ETHERNET_SETTINGS);
+  SPI_ETH.beginTransaction(SPI_ETHERNET_SETTINGS);
   W5100.getIPAddress(ret.raw_address());
-  SPI.endTransaction();
+  SPI_ETH.endTransaction();
   return ret;
 }
 
 IPAddress EthernetClass::subnetMask()
 {
   IPAddress ret;
-  SPI.beginTransaction(SPI_ETHERNET_SETTINGS);
+  SPI_ETH.beginTransaction(SPI_ETHERNET_SETTINGS);
   W5100.getSubnetMask(ret.raw_address());
-  SPI.endTransaction();
+  SPI_ETH.endTransaction();
   return ret;
 }
 
 IPAddress EthernetClass::gatewayIP()
 {
   IPAddress ret;
-  SPI.beginTransaction(SPI_ETHERNET_SETTINGS);
+  SPI_ETH.beginTransaction(SPI_ETHERNET_SETTINGS);
   W5100.getGatewayIp(ret.raw_address());
-  SPI.endTransaction();
+  SPI_ETH.endTransaction();
   return ret;
 }
 
diff --git a/libraries/MySensors/MyConfig.h b/libraries/MySensors/MyConfig.h
index bbbabdb..c28e15f 100644
--- a/libraries/MySensors/MyConfig.h
+++ b/libraries/MySensors/MyConfig.h
@@ -152,35 +152,12 @@
 
 //#define MY_WITH_LEDS_BLINKING_INVERSE
 
-
-// default LEDs blinking period in milliseconds
-#ifndef MY_DEFAULT_LED_BLINK_PERIOD
-#define MY_DEFAULT_LED_BLINK_PERIOD 300
-#endif
-// The RX LED default pin
-#ifndef MY_DEFAULT_RX_LED_PIN
-	#if defined(ARDUINO_ARCH_ESP8266)
-		#define MY_DEFAULT_RX_LED_PIN 8
-	#else
-		#define MY_DEFAULT_RX_LED_PIN 6
-	#endif
-#endif
-// The TX LED default pin
-#ifndef MY_DEFAULT_TX_LED_PIN
-	#if defined(ARDUINO_ARCH_ESP8266)
-		#define MY_DEFAULT_TX_LED_PIN 9
-	#else
-		#define MY_DEFAULT_TX_LED_PIN 5
-	#endif
-#endif
-// The Error LED default pin
-#ifndef MY_DEFAULT_ERR_LED_PIN
-	#if defined(ARDUINO_ARCH_ESP8266)
-		#define MY_DEFAULT_ERR_LED_PIN 7
-	#else
-		#define MY_DEFAULT_ERR_LED_PIN 4
-	#endif
-#endif
+// The following defines can be used to set the port pin, that the LED is connected to
+// If one of the following is defined here, or in the sketch, MY_LEDS_BLINKING_FEATURE will be
+// enabled by default. (Replace x with the pin number you have the LED on)
+//#define MY_DEFAULT_ERR_LED x
+//#define MY_DEFAULT_TX_LED x
+//#define MY_DEFAULT_RX_LED x
 
 /**********************************************
 *  Gateway inclusion button/mode configuration
diff --git a/libraries/MySensors/MySensor.h b/libraries/MySensors/MySensor.h
index 2833f5a..75ef82d 100644
--- a/libraries/MySensors/MySensor.h
+++ b/libraries/MySensors/MySensor.h
@@ -58,6 +58,7 @@
         #include "core/MyHwSAMD.cpp"
 #endif
 
+// LEDS
 #if !defined(MY_DEFAULT_ERR_LED_PIN) & defined(MY_HW_ERR_LED_PIN)
 	#define MY_DEFAULT_ERR_LED_PIN MY_HW_ERR_LED_PIN
 #endif
@@ -67,7 +68,7 @@
 #endif
 
 #if !defined(MY_DEFAULT_RX_LED_PIN) && defined(MY_HW_TX_LED_PIN)
-	#define MY_DEFAULT_TX_LED_PIN MY_HW_TX_LED_PIN
+	#define MY_DEFAULT_RX_LED_PIN MY_HW_TX_LED_PIN
 #endif
 
 // Not necessary to include blinking feature if no LED's are defined!
@@ -80,13 +81,43 @@
 	#define MY_LEDS_BLINKING_FEATURE
 #endif
 
-// LEDS
+
+// default LEDs blinking period in milliseconds
+#ifndef MY_DEFAULT_LED_BLINK_PERIOD
+#define MY_DEFAULT_LED_BLINK_PERIOD 300
+#endif
+// The RX LED default pin
+#ifndef MY_DEFAULT_RX_LED_PIN
+	#if defined(ARDUINO_ARCH_ESP8266)
+		#define MY_DEFAULT_RX_LED_PIN 8
+	#else
+		#define MY_DEFAULT_RX_LED_PIN 6
+	#endif
+#endif
+// The TX LED default pin
+#ifndef MY_DEFAULT_TX_LED_PIN
+	#if defined(ARDUINO_ARCH_ESP8266)
+		#define MY_DEFAULT_TX_LED_PIN 9
+	#else
+		#define MY_DEFAULT_TX_LED_PIN 5
+	#endif
+#endif
+// The Error LED default pin
+#ifndef MY_DEFAULT_ERR_LED_PIN
+	#if defined(ARDUINO_ARCH_ESP8266)
+		#define MY_DEFAULT_ERR_LED_PIN 7
+	#else
+		#define MY_DEFAULT_ERR_LED_PIN 4
+	#endif
+#endif
+
 #if defined(MY_LEDS_BLINKING_FEATURE)
 	#include "core/MyLeds.cpp"
 #else
 	#include "core/MyLeds.h"
 #endif
 
+
 // INCLUSION MODE
 #if defined(MY_INCLUSION_MODE_FEATURE)
 	#include "core/MyInclusionMode.cpp"