diff --git a/AVR/lib/RF24/Doxyfile b/AVR/lib/RF24/Doxyfile deleted file mode 100644 index 4604afc..0000000 --- a/AVR/lib/RF24/Doxyfile +++ /dev/null @@ -1,1551 +0,0 @@ -# Doxyfile 1.6.3 - -# This file describes the settings to be used by the documentation system -# doxygen (www.doxygen.org) for a project -# -# All text after a hash (#) is considered a comment and will be ignored -# The format is: -# TAG = value [value, ...] -# For lists items can also be appended using: -# TAG += value [value, ...] -# Values that contain spaces should be placed between quotes (" ") - -#--------------------------------------------------------------------------- -# Project related configuration options -#--------------------------------------------------------------------------- - -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all -# text before the first occurrence of this tag. Doxygen uses libiconv (or the -# iconv built into libc) for the transcoding. See -# http://www.gnu.org/software/libiconv for the list of possible encodings. - -DOXYFILE_ENCODING = UTF-8 - -# The PROJECT_NAME tag is a single word (or a sequence of words surrounded -# by quotes) that should identify the project. - -PROJECT_NAME = RF24 - -# The PROJECT_NUMBER tag can be used to enter a project or revision number. -# This could be handy for archiving the generated documentation or -# if some version control system is used. - -PROJECT_NUMBER = v1 - -# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) -# base path where the generated documentation will be put. -# If a relative path is entered, it will be relative to the location -# where doxygen was started. If left blank the current directory will be used. - -OUTPUT_DIRECTORY = docs - -# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create -# 4096 sub-directories (in 2 levels) under the output directory of each output -# format and will distribute the generated files over these directories. -# Enabling this option can be useful when feeding doxygen a huge amount of -# source files, where putting all generated files in the same directory would -# otherwise cause performance problems for the file system. - -CREATE_SUBDIRS = NO - -# The OUTPUT_LANGUAGE tag is used to specify the language in which all -# documentation generated by doxygen is written. Doxygen will use this -# information to generate all constant output in the proper language. -# The default language is English, other supported languages are: -# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, -# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, -# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. - -OUTPUT_LANGUAGE = English - -# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will -# include brief member descriptions after the members that are listed in -# the file and class documentation (similar to JavaDoc). -# Set to NO to disable this. - -BRIEF_MEMBER_DESC = YES - -# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend -# the brief description of a member or function before the detailed description. -# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the -# brief descriptions will be completely suppressed. - -REPEAT_BRIEF = YES - -# This tag implements a quasi-intelligent brief description abbreviator -# that is used to form the text in various listings. Each string -# in this list, if found as the leading text of the brief description, will be -# stripped from the text and the result after processing the whole list, is -# used as the annotated text. Otherwise, the brief description is used as-is. -# If left blank, the following values are used ("$name" is automatically -# replaced with the name of the entity): "The $name class" "The $name widget" -# "The $name file" "is" "provides" "specifies" "contains" -# "represents" "a" "an" "the" - -ABBREVIATE_BRIEF = - -# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then -# Doxygen will generate a detailed section even if there is only a brief -# description. - -ALWAYS_DETAILED_SEC = NO - -# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all -# inherited members of a class in the documentation of that class as if those -# members were ordinary class members. Constructors, destructors and assignment -# operators of the base classes will not be shown. - -INLINE_INHERITED_MEMB = NO - -# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full -# path before files name in the file list and in the header files. If set -# to NO the shortest path that makes the file name unique will be used. - -FULL_PATH_NAMES = YES - -# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag -# can be used to strip a user-defined part of the path. Stripping is -# only done if one of the specified strings matches the left-hand part of -# the path. The tag can be used to show relative paths in the file list. -# If left blank the directory from which doxygen is run is used as the -# path to strip. - -STRIP_FROM_PATH = - -# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of -# the path mentioned in the documentation of a class, which tells -# the reader which header file to include in order to use a class. -# If left blank only the name of the header file containing the class -# definition is used. Otherwise one should specify the include paths that -# are normally passed to the compiler using the -I flag. - -STRIP_FROM_INC_PATH = - -# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter -# (but less readable) file names. This can be useful is your file systems -# doesn't support long names like on DOS, Mac, or CD-ROM. - -SHORT_NAMES = NO - -# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen -# will interpret the first line (until the first dot) of a JavaDoc-style -# comment as the brief description. If set to NO, the JavaDoc -# comments will behave just like regular Qt-style comments -# (thus requiring an explicit @brief command for a brief description.) - -JAVADOC_AUTOBRIEF = YES - -# If the QT_AUTOBRIEF tag is set to YES then Doxygen will -# interpret the first line (until the first dot) of a Qt-style -# comment as the brief description. If set to NO, the comments -# will behave just like regular Qt-style comments (thus requiring -# an explicit \brief command for a brief description.) - -QT_AUTOBRIEF = YES - -# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen -# treat a multi-line C++ special comment block (i.e. a block of //! or /// -# comments) as a brief description. This used to be the default behaviour. -# The new default is to treat a multi-line C++ comment block as a detailed -# description. Set this tag to YES if you prefer the old behaviour instead. - -MULTILINE_CPP_IS_BRIEF = NO - -# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented -# member inherits the documentation from any documented member that it -# re-implements. - -INHERIT_DOCS = YES - -# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce -# a new page for each member. If set to NO, the documentation of a member will -# be part of the file/class/namespace that contains it. - -SEPARATE_MEMBER_PAGES = NO - -# The TAB_SIZE tag can be used to set the number of spaces in a tab. -# Doxygen uses this value to replace tabs by spaces in code fragments. - -TAB_SIZE = 8 - -# This tag can be used to specify a number of aliases that acts -# as commands in the documentation. An alias has the form "name=value". -# For example adding "sideeffect=\par Side Effects:\n" will allow you to -# put the command \sideeffect (or @sideeffect) in the documentation, which -# will result in a user-defined paragraph with heading "Side Effects:". -# You can put \n's in the value part of an alias to insert newlines. - -ALIASES = - -# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C -# sources only. Doxygen will then generate output that is more tailored for C. -# For instance, some of the names that are used will be different. The list -# of all members will be omitted, etc. - -OPTIMIZE_OUTPUT_FOR_C = NO - -# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java -# sources only. Doxygen will then generate output that is more tailored for -# Java. For instance, namespaces will be presented as packages, qualified -# scopes will look different, etc. - -OPTIMIZE_OUTPUT_JAVA = NO - -# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran -# sources only. Doxygen will then generate output that is more tailored for -# Fortran. - -OPTIMIZE_FOR_FORTRAN = NO - -# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL -# sources. Doxygen will then generate output that is tailored for -# VHDL. - -OPTIMIZE_OUTPUT_VHDL = NO - -# Doxygen selects the parser to use depending on the extension of the files it parses. -# With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this tag. -# The format is ext=language, where ext is a file extension, and language is one of -# the parsers supported by doxygen: IDL, Java, Javascript, C#, C, C++, D, PHP, -# Objective-C, Python, Fortran, VHDL, C, C++. For instance to make doxygen treat -# .inc files as Fortran files (default is PHP), and .f files as C (default is Fortran), -# use: inc=Fortran f=C. Note that for custom extensions you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. - -EXTENSION_MAPPING = - -# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want -# to include (a tag file for) the STL sources as input, then you should -# set this tag to YES in order to let doxygen match functions declarations and -# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. -# func(std::string) {}). This also make the inheritance and collaboration -# diagrams that involve STL classes more complete and accurate. - -BUILTIN_STL_SUPPORT = NO - -# If you use Microsoft's C++/CLI language, you should set this option to YES to -# enable parsing support. - -CPP_CLI_SUPPORT = NO - -# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. -# Doxygen will parse them like normal C++ but will assume all classes use public -# instead of private inheritance when no explicit protection keyword is present. - -SIP_SUPPORT = NO - -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen to replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. - -IDL_PROPERTY_SUPPORT = YES - -# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC -# tag is set to YES, then doxygen will reuse the documentation of the first -# member in the group (if any) for the other members of the group. By default -# all members of a group must be documented explicitly. - -DISTRIBUTE_GROUP_DOC = NO - -# Set the SUBGROUPING tag to YES (the default) to allow class member groups of -# the same type (for instance a group of public functions) to be put as a -# subgroup of that type (e.g. under the Public Functions section). Set it to -# NO to prevent subgrouping. Alternatively, this can be done per class using -# the \nosubgrouping command. - -SUBGROUPING = YES - -# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum -# is documented as struct, union, or enum with the name of the typedef. So -# typedef struct TypeS {} TypeT, will appear in the documentation as a struct -# with name TypeT. When disabled the typedef will appear as a member of a file, -# namespace, or class. And the struct will be named TypeS. This can typically -# be useful for C code in case the coding convention dictates that all compound -# types are typedef'ed and only the typedef is referenced, never the tag name. - -TYPEDEF_HIDES_STRUCT = NO - -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penality. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will rougly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols - -SYMBOL_CACHE_SIZE = 0 - -#--------------------------------------------------------------------------- -# Build related configuration options -#--------------------------------------------------------------------------- - -# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in -# documentation are documented, even if no documentation was available. -# Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES - -EXTRACT_ALL = NO - -# If the EXTRACT_PRIVATE tag is set to YES all private members of a class -# will be included in the documentation. - -EXTRACT_PRIVATE = NO - -# If the EXTRACT_STATIC tag is set to YES all static members of a file -# will be included in the documentation. - -EXTRACT_STATIC = NO - -# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) -# defined locally in source files will be included in the documentation. -# If set to NO only classes defined in header files are included. - -EXTRACT_LOCAL_CLASSES = YES - -# This flag is only useful for Objective-C code. When set to YES local -# methods, which are defined in the implementation section but not in -# the interface are included in the documentation. -# If set to NO (the default) only methods in the interface are included. - -EXTRACT_LOCAL_METHODS = NO - -# If this flag is set to YES, the members of anonymous namespaces will be -# extracted and appear in the documentation as a namespace called -# 'anonymous_namespace{file}', where file will be replaced with the base -# name of the file that contains the anonymous namespace. By default -# anonymous namespace are hidden. - -EXTRACT_ANON_NSPACES = NO - -# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all -# undocumented members of documented classes, files or namespaces. -# If set to NO (the default) these members will be included in the -# various overviews, but no documentation section is generated. -# This option has no effect if EXTRACT_ALL is enabled. - -HIDE_UNDOC_MEMBERS = NO - -# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all -# undocumented classes that are normally visible in the class hierarchy. -# If set to NO (the default) these classes will be included in the various -# overviews. This option has no effect if EXTRACT_ALL is enabled. - -HIDE_UNDOC_CLASSES = NO - -# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all -# friend (class|struct|union) declarations. -# If set to NO (the default) these declarations will be included in the -# documentation. - -HIDE_FRIEND_COMPOUNDS = NO - -# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any -# documentation blocks found inside the body of a function. -# If set to NO (the default) these blocks will be appended to the -# function's detailed documentation block. - -HIDE_IN_BODY_DOCS = NO - -# The INTERNAL_DOCS tag determines if documentation -# that is typed after a \internal command is included. If the tag is set -# to NO (the default) then the documentation will be excluded. -# Set it to YES to include the internal documentation. - -INTERNAL_DOCS = NO - -# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate -# file names in lower-case letters. If set to YES upper-case letters are also -# allowed. This is useful if you have classes or files whose names only differ -# in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. - -CASE_SENSE_NAMES = YES - -# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen -# will show members with their full class and namespace scopes in the -# documentation. If set to YES the scope will be hidden. - -HIDE_SCOPE_NAMES = NO - -# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen -# will put a list of the files that are included by a file in the documentation -# of that file. - -SHOW_INCLUDE_FILES = YES - -# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen -# will list include files with double quotes in the documentation -# rather than with sharp brackets. - -FORCE_LOCAL_INCLUDES = NO - -# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] -# is inserted in the documentation for inline members. - -INLINE_INFO = YES - -# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen -# will sort the (detailed) documentation of file and class members -# alphabetically by member name. If set to NO the members will appear in -# declaration order. - -SORT_MEMBER_DOCS = YES - -# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the -# brief documentation of file, namespace and class members alphabetically -# by member name. If set to NO (the default) the members will appear in -# declaration order. - -SORT_BRIEF_DOCS = NO - -# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the (brief and detailed) documentation of class members so that constructors and destructors are listed first. If set to NO (the default) the constructors will appear in the respective orders defined by SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO. - -SORT_MEMBERS_CTORS_1ST = NO - -# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the -# hierarchy of group names into alphabetical order. If set to NO (the default) -# the group names will appear in their defined order. - -SORT_GROUP_NAMES = NO - -# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be -# sorted by fully-qualified names, including namespaces. If set to -# NO (the default), the class list will be sorted only by class name, -# not including the namespace part. -# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. -# Note: This option applies only to the class list, not to the -# alphabetical list. - -SORT_BY_SCOPE_NAME = NO - -# The GENERATE_TODOLIST tag can be used to enable (YES) or -# disable (NO) the todo list. This list is created by putting \todo -# commands in the documentation. - -GENERATE_TODOLIST = YES - -# The GENERATE_TESTLIST tag can be used to enable (YES) or -# disable (NO) the test list. This list is created by putting \test -# commands in the documentation. - -GENERATE_TESTLIST = YES - -# The GENERATE_BUGLIST tag can be used to enable (YES) or -# disable (NO) the bug list. This list is created by putting \bug -# commands in the documentation. - -GENERATE_BUGLIST = YES - -# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or -# disable (NO) the deprecated list. This list is created by putting -# \deprecated commands in the documentation. - -GENERATE_DEPRECATEDLIST= YES - -# The ENABLED_SECTIONS tag can be used to enable conditional -# documentation sections, marked by \if sectionname ... \endif. - -ENABLED_SECTIONS = - -# The MAX_INITIALIZER_LINES tag determines the maximum number of lines -# the initial value of a variable or define consists of for it to appear in -# the documentation. If the initializer consists of more lines than specified -# here it will be hidden. Use a value of 0 to hide initializers completely. -# The appearance of the initializer of individual variables and defines in the -# documentation can be controlled using \showinitializer or \hideinitializer -# command in the documentation regardless of this setting. - -MAX_INITIALIZER_LINES = 30 - -# Set the SHOW_USED_FILES tag to NO to disable the list of files generated -# at the bottom of the documentation of classes and structs. If set to YES the -# list will mention the files that were used to generate the documentation. - -SHOW_USED_FILES = YES - -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = NO - -# Set the SHOW_FILES tag to NO to disable the generation of the Files page. -# This will remove the Files entry from the Quick Index and from the -# Folder Tree View (if specified). The default is YES. - -SHOW_FILES = YES - -# Set the SHOW_NAMESPACES tag to NO to disable the generation of the -# Namespaces page. -# This will remove the Namespaces entry from the Quick Index -# and from the Folder Tree View (if specified). The default is YES. - -SHOW_NAMESPACES = YES - -# The FILE_VERSION_FILTER tag can be used to specify a program or script that -# doxygen should invoke to get the current version for each file (typically from -# the version control system). Doxygen will invoke the program by executing (via -# popen()) the command , where is the value of -# the FILE_VERSION_FILTER tag, and is the name of an input file -# provided by doxygen. Whatever the program writes to standard output -# is used as the file version. See the manual for examples. - -FILE_VERSION_FILTER = - -# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by -# doxygen. The layout file controls the global structure of the generated output files -# in an output format independent way. The create the layout file that represents -# doxygen's defaults, run doxygen with the -l option. You can optionally specify a -# file name after the option, if omitted DoxygenLayout.xml will be used as the name -# of the layout file. - -LAYOUT_FILE = - -#--------------------------------------------------------------------------- -# configuration options related to warning and progress messages -#--------------------------------------------------------------------------- - -# The QUIET tag can be used to turn on/off the messages that are generated -# by doxygen. Possible values are YES and NO. If left blank NO is used. - -QUIET = NO - -# The WARNINGS tag can be used to turn on/off the warning messages that are -# generated by doxygen. Possible values are YES and NO. If left blank -# NO is used. - -WARNINGS = YES - -# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings -# for undocumented members. If EXTRACT_ALL is set to YES then this flag will -# automatically be disabled. - -WARN_IF_UNDOCUMENTED = YES - -# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for -# potential errors in the documentation, such as not documenting some -# parameters in a documented function, or documenting parameters that -# don't exist or using markup commands wrongly. - -WARN_IF_DOC_ERROR = YES - -# This WARN_NO_PARAMDOC option can be abled to get warnings for -# functions that are documented, but have no documentation for their parameters -# or return value. If set to NO (the default) doxygen will only warn about -# wrong or incomplete parameter documentation, but not about the absence of -# documentation. - -WARN_NO_PARAMDOC = NO - -# The WARN_FORMAT tag determines the format of the warning messages that -# doxygen can produce. The string should contain the $file, $line, and $text -# tags, which will be replaced by the file and line number from which the -# warning originated and the warning text. Optionally the format may contain -# $version, which will be replaced by the version of the file (if it could -# be obtained via FILE_VERSION_FILTER) - -WARN_FORMAT = "$file:$line: $text" - -# The WARN_LOGFILE tag can be used to specify a file to which warning -# and error messages should be written. If left blank the output is written -# to stderr. - -WARN_LOGFILE = - -#--------------------------------------------------------------------------- -# configuration options related to the input files -#--------------------------------------------------------------------------- - -# The INPUT tag can be used to specify the files and/or directories that contain -# documented source files. You may enter file names like "myfile.cpp" or -# directories like "/usr/src/myproject". Separate the files or directories -# with spaces. - -INPUT = . - -# This tag can be used to specify the character encoding of the source files -# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is -# also the default input encoding. Doxygen uses libiconv (or the iconv built -# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for -# the list of possible encodings. - -INPUT_ENCODING = UTF-8 - -# If the value of the INPUT tag contains directories, you can use the -# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp -# and *.h) to filter out the source-files in the directories. If left -# blank the following patterns are tested: -# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx -# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90 - -FILE_PATTERNS = *.h FAQ - -# The RECURSIVE tag can be used to turn specify whether or not subdirectories -# should be searched for input files as well. Possible values are YES and NO. -# If left blank NO is used. - -RECURSIVE = NO - -# The EXCLUDE tag can be used to specify files and/or directories that should -# excluded from the INPUT source files. This way you can easily exclude a -# subdirectory from a directory tree whose root is specified with the INPUT tag. - -EXCLUDE = - -# The EXCLUDE_SYMLINKS tag can be used select whether or not files or -# directories that are symbolic links (a Unix filesystem feature) are excluded -# from the input. - -EXCLUDE_SYMLINKS = NO - -# If the value of the INPUT tag contains directories, you can use the -# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude -# certain files from those directories. Note that the wildcards are matched -# against the file with absolute path, so to exclude all test directories -# for example use the pattern */test/* - -EXCLUDE_PATTERNS = - -# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names -# (namespaces, classes, functions, etc.) that should be excluded from the -# output. The symbol name can be a fully qualified name, a word, or if the -# wildcard * is used, a substring. Examples: ANamespace, AClass, -# AClass::ANamespace, ANamespace::*Test - -EXCLUDE_SYMBOLS = - -# The EXAMPLE_PATH tag can be used to specify one or more files or -# directories that contain example code fragments that are included (see -# the \include command). - -EXAMPLE_PATH = examples - -# If the value of the EXAMPLE_PATH tag contains directories, you can use the -# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp -# and *.h) to filter out the source-files in the directories. If left -# blank all files are included. - -EXAMPLE_PATTERNS = - -# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be -# searched for input files to be used with the \include or \dontinclude -# commands irrespective of the value of the RECURSIVE tag. -# Possible values are YES and NO. If left blank NO is used. - -EXAMPLE_RECURSIVE = YES - -# The IMAGE_PATH tag can be used to specify one or more files or -# directories that contain image that are included in the documentation (see -# the \image command). - -IMAGE_PATH = - -# The INPUT_FILTER tag can be used to specify a program that doxygen should -# invoke to filter for each input file. Doxygen will invoke the filter program -# by executing (via popen()) the command , where -# is the value of the INPUT_FILTER tag, and is the name of an -# input file. Doxygen will then use the output that the filter program writes -# to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. - -INPUT_FILTER = - -# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern -# basis. -# Doxygen will compare the file name with each pattern and apply the -# filter if there is a match. -# The filters are a list of the form: -# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further -# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER -# is applied to all files. - -FILTER_PATTERNS = - -# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using -# INPUT_FILTER) will be used to filter the input files when producing source -# files to browse (i.e. when SOURCE_BROWSER is set to YES). - -FILTER_SOURCE_FILES = NO - -#--------------------------------------------------------------------------- -# configuration options related to source browsing -#--------------------------------------------------------------------------- - -# If the SOURCE_BROWSER tag is set to YES then a list of source files will -# be generated. Documented entities will be cross-referenced with these sources. -# Note: To get rid of all source code in the generated output, make sure also -# VERBATIM_HEADERS is set to NO. - -SOURCE_BROWSER = NO - -# Setting the INLINE_SOURCES tag to YES will include the body -# of functions and classes directly in the documentation. - -INLINE_SOURCES = NO - -# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct -# doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. - -STRIP_CODE_COMMENTS = YES - -# If the REFERENCED_BY_RELATION tag is set to YES -# then for each documented function all documented -# functions referencing it will be listed. - -REFERENCED_BY_RELATION = NO - -# If the REFERENCES_RELATION tag is set to YES -# then for each documented function all documented entities -# called/used by that function will be listed. - -REFERENCES_RELATION = NO - -# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) -# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from -# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will -# link to the source code. -# Otherwise they will link to the documentation. - -REFERENCES_LINK_SOURCE = NO - -# If the USE_HTAGS tag is set to YES then the references to source code -# will point to the HTML generated by the htags(1) tool instead of doxygen -# built-in source browser. The htags tool is part of GNU's global source -# tagging system (see http://www.gnu.org/software/global/global.html). You -# will need version 4.8.6 or higher. - -USE_HTAGS = NO - -# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen -# will generate a verbatim copy of the header file for each class for -# which an include is specified. Set to NO to disable this. - -VERBATIM_HEADERS = YES - -#--------------------------------------------------------------------------- -# configuration options related to the alphabetical class index -#--------------------------------------------------------------------------- - -# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index -# of all compounds will be generated. Enable this if the project -# contains a lot of classes, structs, unions or interfaces. - -ALPHABETICAL_INDEX = NO - -# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then -# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns -# in which this list will be split (can be a number in the range [1..20]) - -COLS_IN_ALPHA_INDEX = 5 - -# In case all classes in a project start with a common prefix, all -# classes will be put under the same header in the alphabetical index. -# The IGNORE_PREFIX tag can be used to specify one or more prefixes that -# should be ignored while generating the index headers. - -IGNORE_PREFIX = - -#--------------------------------------------------------------------------- -# configuration options related to the HTML output -#--------------------------------------------------------------------------- - -# If the GENERATE_HTML tag is set to YES (the default) Doxygen will -# generate HTML output. - -GENERATE_HTML = YES - -# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `html' will be used as the default path. - -HTML_OUTPUT = html - -# The HTML_FILE_EXTENSION tag can be used to specify the file extension for -# each generated HTML page (for example: .htm,.php,.asp). If it is left blank -# doxygen will generate files with .html extension. - -HTML_FILE_EXTENSION = .html - -# The HTML_HEADER tag can be used to specify a personal HTML header for -# each generated HTML page. If it is left blank doxygen will generate a -# standard header. - -HTML_HEADER = - -# The HTML_FOOTER tag can be used to specify a personal HTML footer for -# each generated HTML page. If it is left blank doxygen will generate a -# standard footer. - -HTML_FOOTER = - -# The HTML_STYLESHEET tag can be used to specify a user-defined cascading -# style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# stylesheet in the HTML output directory as well, or it will be erased! - -HTML_STYLESHEET = doxygen-custom.css - -# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML -# page will contain the date and time when the page was generated. Setting -# this to NO can help when comparing the output of multiple runs. - -HTML_TIMESTAMP = YES - -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - -# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML -# documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). - -HTML_DYNAMIC_SECTIONS = NO - -# If the GENERATE_DOCSET tag is set to YES, additional index files -# will be generated that can be used as input for Apple's Xcode 3 -# integrated development environment, introduced with OSX 10.5 (Leopard). -# To create a documentation set, doxygen will generate a Makefile in the -# HTML output directory. Running make will produce the docset in that -# directory and running "make install" will install the docset in -# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find -# it at startup. -# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information. - -GENERATE_DOCSET = NO - -# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the -# feed. A documentation feed provides an umbrella under which multiple -# documentation sets from a single provider (such as a company or product suite) -# can be grouped. - -DOCSET_FEEDNAME = "Doxygen generated docs" - -# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that -# should uniquely identify the documentation set bundle. This should be a -# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen -# will append .docset to the name. - -DOCSET_BUNDLE_ID = org.doxygen.Project - -# If the GENERATE_HTMLHELP tag is set to YES, additional index files -# will be generated that can be used as input for tools like the -# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) -# of the generated HTML documentation. - -GENERATE_HTMLHELP = NO - -# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can -# be used to specify the file name of the resulting .chm file. You -# can add a path in front of the file if the result should not be -# written to the html output directory. - -CHM_FILE = - -# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can -# be used to specify the location (absolute path including file name) of -# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run -# the HTML help compiler on the generated index.hhp. - -HHC_LOCATION = - -# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag -# controls if a separate .chi index file is generated (YES) or that -# it should be included in the master .chm file (NO). - -GENERATE_CHI = NO - -# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING -# is used to encode HtmlHelp index (hhk), content (hhc) and project file -# content. - -CHM_INDEX_ENCODING = - -# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag -# controls whether a binary table of contents is generated (YES) or a -# normal table of contents (NO) in the .chm file. - -BINARY_TOC = NO - -# The TOC_EXPAND flag can be set to YES to add extra items for group members -# to the contents of the HTML help documentation and to the tree view. - -TOC_EXPAND = NO - -# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER -# are set, an additional index file will be generated that can be used as input for -# Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated -# HTML documentation. - -GENERATE_QHP = NO - -# If the QHG_LOCATION tag is specified, the QCH_FILE tag can -# be used to specify the file name of the resulting .qch file. -# The path specified is relative to the HTML output folder. - -QCH_FILE = - -# The QHP_NAMESPACE tag specifies the namespace to use when generating -# Qt Help Project output. For more information please see -# http://doc.trolltech.com/qthelpproject.html#namespace - -QHP_NAMESPACE = org.doxygen.Project - -# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating -# Qt Help Project output. For more information please see -# http://doc.trolltech.com/qthelpproject.html#virtual-folders - -QHP_VIRTUAL_FOLDER = doc - -# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to add. -# For more information please see -# http://doc.trolltech.com/qthelpproject.html#custom-filters - -QHP_CUST_FILTER_NAME = - -# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the custom filter to add.For more information please see -# Qt Help Project / Custom Filters. - -QHP_CUST_FILTER_ATTRS = - -# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this project's -# filter section matches. -# Qt Help Project / Filter Attributes. - -QHP_SECT_FILTER_ATTRS = - -# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can -# be used to specify the location of Qt's qhelpgenerator. -# If non-empty doxygen will try to run qhelpgenerator on the generated -# .qhp file. - -QHG_LOCATION = - -# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files -# will be generated, which together with the HTML files, form an Eclipse help -# plugin. To install this plugin and make it available under the help contents -# menu in Eclipse, the contents of the directory containing the HTML and XML -# files needs to be copied into the plugins directory of eclipse. The name of -# the directory within the plugins directory should be the same as -# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before the help appears. - -GENERATE_ECLIPSEHELP = NO - -# A unique identifier for the eclipse help plugin. When installing the plugin -# the directory name containing the HTML and XML files should also have -# this name. - -ECLIPSE_DOC_ID = org.doxygen.Project - -# The DISABLE_INDEX tag can be used to turn on/off the condensed index at -# top of each HTML page. The value NO (the default) enables the index and -# the value YES disables it. - -DISABLE_INDEX = NO - -# This tag can be used to set the number of enum values (range [1..20]) -# that doxygen will group on one line in the generated HTML documentation. - -ENUM_VALUES_PER_LINE = 4 - -# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index -# structure should be generated to display hierarchical information. -# If the tag value is set to YES, a side panel will be generated -# containing a tree-like index structure (just like the one that -# is generated for HTML Help). For this to work a browser that supports -# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser). -# Windows users are probably better off using the HTML help feature. - -GENERATE_TREEVIEW = NO - -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - -# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be -# used to set the initial width (in pixels) of the frame in which the tree -# is shown. - -TREEVIEW_WIDTH = 250 - -# Use this tag to change the font size of Latex formulas included -# as images in the HTML documentation. The default is 10. Note that -# when you change the font size after a successful doxygen run you need -# to manually remove any form_*.png images from the HTML output directory -# to force them to be regenerated. - -FORMULA_FONTSIZE = 10 - -# When the SEARCHENGINE tag is enabled doxygen will generate a search box for the HTML output. The underlying search engine uses javascript -# and DHTML and should work on any modern browser. Note that when using HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) there is already a search function so this one should -# typically be disabled. For large projects the javascript based search engine -# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution. - -SEARCHENGINE = YES - -# When the SERVER_BASED_SEARCH tag is enabled the search engine will be implemented using a PHP enabled web server instead of at the web client using Javascript. Doxygen will generate the search PHP script and index -# file to put on the web server. The advantage of the server based approach is that it scales better to large projects and allows full text search. The disadvances is that it is more difficult to setup -# and does not have live searching capabilities. - -SERVER_BASED_SEARCH = NO - -#--------------------------------------------------------------------------- -# configuration options related to the LaTeX output -#--------------------------------------------------------------------------- - -# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will -# generate Latex output. - -GENERATE_LATEX = NO - -# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `latex' will be used as the default path. - -LATEX_OUTPUT = latex - -# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be -# invoked. If left blank `latex' will be used as the default command name. -# Note that when enabling USE_PDFLATEX this option is only used for -# generating bitmaps for formulas in the HTML output, but not in the -# Makefile that is written to the output directory. - -LATEX_CMD_NAME = latex - -# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to -# generate index for LaTeX. If left blank `makeindex' will be used as the -# default command name. - -MAKEINDEX_CMD_NAME = makeindex - -# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact -# LaTeX documents. This may be useful for small projects and may help to -# save some trees in general. - -COMPACT_LATEX = NO - -# The PAPER_TYPE tag can be used to set the paper type that is used -# by the printer. Possible values are: a4, a4wide, letter, legal and -# executive. If left blank a4wide will be used. - -PAPER_TYPE = a4wide - -# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX -# packages that should be included in the LaTeX output. - -EXTRA_PACKAGES = - -# The LATEX_HEADER tag can be used to specify a personal LaTeX header for -# the generated latex document. The header should contain everything until -# the first chapter. If it is left blank doxygen will generate a -# standard header. Notice: only use this tag if you know what you are doing! - -LATEX_HEADER = - -# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated -# is prepared for conversion to pdf (using ps2pdf). The pdf file will -# contain links (just like the HTML output) instead of page references -# This makes the output suitable for online browsing using a pdf viewer. - -PDF_HYPERLINKS = YES - -# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of -# plain latex in the generated Makefile. Set this option to YES to get a -# higher quality PDF documentation. - -USE_PDFLATEX = YES - -# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. -# command to the generated LaTeX files. This will instruct LaTeX to keep -# running if errors occur, instead of asking the user for help. -# This option is also used when generating formulas in HTML. - -LATEX_BATCHMODE = NO - -# If LATEX_HIDE_INDICES is set to YES then doxygen will not -# include the index chapters (such as File Index, Compound Index, etc.) -# in the output. - -LATEX_HIDE_INDICES = NO - -# If LATEX_SOURCE_CODE is set to YES then doxygen will include source code with syntax highlighting in the LaTeX output. Note that which sources are shown also depends on other settings such as SOURCE_BROWSER. - -LATEX_SOURCE_CODE = NO - -#--------------------------------------------------------------------------- -# configuration options related to the RTF output -#--------------------------------------------------------------------------- - -# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output -# The RTF output is optimized for Word 97 and may not look very pretty with -# other RTF readers or editors. - -GENERATE_RTF = NO - -# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `rtf' will be used as the default path. - -RTF_OUTPUT = rtf - -# If the COMPACT_RTF tag is set to YES Doxygen generates more compact -# RTF documents. This may be useful for small projects and may help to -# save some trees in general. - -COMPACT_RTF = NO - -# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated -# will contain hyperlink fields. The RTF file will -# contain links (just like the HTML output) instead of page references. -# This makes the output suitable for online browsing using WORD or other -# programs which support those fields. -# Note: wordpad (write) and others do not support links. - -RTF_HYPERLINKS = NO - -# Load stylesheet definitions from file. Syntax is similar to doxygen's -# config file, i.e. a series of assignments. You only have to provide -# replacements, missing definitions are set to their default value. - -RTF_STYLESHEET_FILE = - -# Set optional variables used in the generation of an rtf document. -# Syntax is similar to doxygen's config file. - -RTF_EXTENSIONS_FILE = - -#--------------------------------------------------------------------------- -# configuration options related to the man page output -#--------------------------------------------------------------------------- - -# If the GENERATE_MAN tag is set to YES (the default) Doxygen will -# generate man pages - -GENERATE_MAN = NO - -# The MAN_OUTPUT tag is used to specify where the man pages will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `man' will be used as the default path. - -MAN_OUTPUT = man - -# The MAN_EXTENSION tag determines the extension that is added to -# the generated man pages (default is the subroutine's section .3) - -MAN_EXTENSION = .3 - -# If the MAN_LINKS tag is set to YES and Doxygen generates man output, -# then it will generate one additional man file for each entity -# documented in the real man page(s). These additional files -# only source the real man page, but without them the man command -# would be unable to find the correct page. The default is NO. - -MAN_LINKS = NO - -#--------------------------------------------------------------------------- -# configuration options related to the XML output -#--------------------------------------------------------------------------- - -# If the GENERATE_XML tag is set to YES Doxygen will -# generate an XML file that captures the structure of -# the code including all documentation. - -GENERATE_XML = YES - -# The XML_OUTPUT tag is used to specify where the XML pages will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `xml' will be used as the default path. - -XML_OUTPUT = xml - -# The XML_SCHEMA tag can be used to specify an XML schema, -# which can be used by a validating XML parser to check the -# syntax of the XML files. - -XML_SCHEMA = - -# The XML_DTD tag can be used to specify an XML DTD, -# which can be used by a validating XML parser to check the -# syntax of the XML files. - -XML_DTD = - -# If the XML_PROGRAMLISTING tag is set to YES Doxygen will -# dump the program listings (including syntax highlighting -# and cross-referencing information) to the XML output. Note that -# enabling this will significantly increase the size of the XML output. - -XML_PROGRAMLISTING = NO - -#--------------------------------------------------------------------------- -# configuration options for the AutoGen Definitions output -#--------------------------------------------------------------------------- - -# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will -# generate an AutoGen Definitions (see autogen.sf.net) file -# that captures the structure of the code including all -# documentation. Note that this feature is still experimental -# and incomplete at the moment. - -GENERATE_AUTOGEN_DEF = NO - -#--------------------------------------------------------------------------- -# configuration options related to the Perl module output -#--------------------------------------------------------------------------- - -# If the GENERATE_PERLMOD tag is set to YES Doxygen will -# generate a Perl module file that captures the structure of -# the code including all documentation. Note that this -# feature is still experimental and incomplete at the -# moment. - -GENERATE_PERLMOD = NO - -# If the PERLMOD_LATEX tag is set to YES Doxygen will generate -# the necessary Makefile rules, Perl scripts and LaTeX code to be able -# to generate PDF and DVI output from the Perl module output. - -PERLMOD_LATEX = NO - -# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be -# nicely formatted so it can be parsed by a human reader. -# This is useful -# if you want to understand what is going on. -# On the other hand, if this -# tag is set to NO the size of the Perl module output will be much smaller -# and Perl will parse it just the same. - -PERLMOD_PRETTY = YES - -# The names of the make variables in the generated doxyrules.make file -# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. -# This is useful so different doxyrules.make files included by the same -# Makefile don't overwrite each other's variables. - -PERLMOD_MAKEVAR_PREFIX = - -#--------------------------------------------------------------------------- -# Configuration options related to the preprocessor -#--------------------------------------------------------------------------- - -# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will -# evaluate all C-preprocessor directives found in the sources and include -# files. - -ENABLE_PREPROCESSING = YES - -# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro -# names in the source code. If set to NO (the default) only conditional -# compilation will be performed. Macro expansion can be done in a controlled -# way by setting EXPAND_ONLY_PREDEF to YES. - -MACRO_EXPANSION = NO - -# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES -# then the macro expansion is limited to the macros specified with the -# PREDEFINED and EXPAND_AS_DEFINED tags. - -EXPAND_ONLY_PREDEF = NO - -# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files -# in the INCLUDE_PATH (see below) will be search if a #include is found. - -SEARCH_INCLUDES = YES - -# The INCLUDE_PATH tag can be used to specify one or more directories that -# contain include files that are not input files but should be processed by -# the preprocessor. - -INCLUDE_PATH = - -# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard -# patterns (like *.h and *.hpp) to filter out the header-files in the -# directories. If left blank, the patterns specified with FILE_PATTERNS will -# be used. - -INCLUDE_FILE_PATTERNS = - -# The PREDEFINED tag can be used to specify one or more macro names that -# are defined before the preprocessor is started (similar to the -D option of -# gcc). The argument of the tag is a list of macros of the form: name -# or name=definition (no spaces). If the definition and the = are -# omitted =1 is assumed. To prevent a macro definition from being -# undefined via #undef or recursively expanded use the := operator -# instead of the = operator. - -PREDEFINED = - -# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then -# this tag can be used to specify a list of macro names that should be expanded. -# The macro definition that is found in the sources will be used. -# Use the PREDEFINED tag if you want to use a different macro definition. - -EXPAND_AS_DEFINED = - -# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then -# doxygen's preprocessor will remove all function-like macros that are alone -# on a line, have an all uppercase name, and do not end with a semicolon. Such -# function macros are typically used for boiler-plate code, and will confuse -# the parser if not removed. - -SKIP_FUNCTION_MACROS = YES - -#--------------------------------------------------------------------------- -# Configuration::additions related to external references -#--------------------------------------------------------------------------- - -# The TAGFILES option can be used to specify one or more tagfiles. -# Optionally an initial location of the external documentation -# can be added for each tagfile. The format of a tag file without -# this location is as follows: -# -# TAGFILES = file1 file2 ... -# Adding location for the tag files is done as follows: -# -# TAGFILES = file1=loc1 "file2 = loc2" ... -# where "loc1" and "loc2" can be relative or absolute paths or -# URLs. If a location is present for each tag, the installdox tool -# does not have to be run to correct the links. -# Note that each tag file must have a unique name -# (where the name does NOT include the path) -# If a tag file is not located in the directory in which doxygen -# is run, you must also specify the path to the tagfile here. - -TAGFILES = - -# When a file name is specified after GENERATE_TAGFILE, doxygen will create -# a tag file that is based on the input files it reads. - -GENERATE_TAGFILE = - -# If the ALLEXTERNALS tag is set to YES all external classes will be listed -# in the class index. If set to NO only the inherited external classes -# will be listed. - -ALLEXTERNALS = NO - -# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed -# in the modules index. If set to NO, only the current project's groups will -# be listed. - -EXTERNAL_GROUPS = YES - -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of `which perl'). - -PERL_PATH = /usr/bin/perl - -#--------------------------------------------------------------------------- -# Configuration options related to the dot tool -#--------------------------------------------------------------------------- - -# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will -# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base -# or super classes. Setting the tag to NO turns the diagrams off. Note that -# this option is superseded by the HAVE_DOT option below. This is only a -# fallback. It is recommended to install and use dot, since it yields more -# powerful graphs. - -CLASS_DIAGRAMS = YES - -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see -# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - -# If set to YES, the inheritance and collaboration graphs will hide -# inheritance and usage relations if the target is undocumented -# or is not a class. - -HIDE_UNDOC_RELATIONS = YES - -# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is -# available from the path. This tool is part of Graphviz, a graph visualization -# toolkit from AT&T and Lucent Bell Labs. The other options in this section -# have no effect if this option is set to NO (the default) - -HAVE_DOT = NO - -# By default doxygen will write a font called FreeSans.ttf to the output -# directory and reference it in all dot files that doxygen generates. This -# font does not include all possible unicode characters however, so when you need -# these (or just want a differently looking font) you can specify the font name -# using DOT_FONTNAME. You need need to make sure dot is able to find the font, -# which can be done by putting it in a standard location or by setting the -# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory -# containing the font. - -DOT_FONTNAME = FreeSans - -# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. -# The default size is 10pt. - -DOT_FONTSIZE = 10 - -# By default doxygen will tell dot to use the output directory to look for the -# FreeSans.ttf font (which doxygen will put there itself). If you specify a -# different font using DOT_FONTNAME you can set the path where dot -# can find it using this tag. - -DOT_FONTPATH = - -# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for each documented class showing the direct and -# indirect inheritance relations. Setting this tag to YES will force the -# the CLASS_DIAGRAMS tag to NO. - -CLASS_GRAPH = YES - -# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for each documented class showing the direct and -# indirect implementation dependencies (inheritance, containment, and -# class references variables) of the class with other documented classes. - -COLLABORATION_GRAPH = YES - -# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for groups, showing the direct groups dependencies - -GROUP_GRAPHS = YES - -# If the UML_LOOK tag is set to YES doxygen will generate inheritance and -# collaboration diagrams in a style similar to the OMG's Unified Modeling -# Language. - -UML_LOOK = NO - -# If set to YES, the inheritance and collaboration graphs will show the -# relations between templates and their instances. - -TEMPLATE_RELATIONS = NO - -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT -# tags are set to YES then doxygen will generate a graph for each documented -# file showing the direct and indirect include dependencies of the file with -# other documented files. - -INCLUDE_GRAPH = YES - -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and -# HAVE_DOT tags are set to YES then doxygen will generate a graph for each -# documented header file showing the documented files that directly or -# indirectly include this file. - -INCLUDED_BY_GRAPH = YES - -# If the CALL_GRAPH and HAVE_DOT options are set to YES then -# doxygen will generate a call dependency graph for every global function -# or class method. Note that enabling this option will significantly increase -# the time of a run. So in most cases it will be better to enable call graphs -# for selected functions only using the \callgraph command. - -CALL_GRAPH = NO - -# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then -# doxygen will generate a caller dependency graph for every global function -# or class method. Note that enabling this option will significantly increase -# the time of a run. So in most cases it will be better to enable caller -# graphs for selected functions only using the \callergraph command. - -CALLER_GRAPH = NO - -# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen -# will graphical hierarchy of all classes instead of a textual one. - -GRAPHICAL_HIERARCHY = YES - -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES -# then doxygen will show the dependencies a directory has on other directories -# in a graphical way. The dependency relations are determined by the #include -# relations between the files in the directories. - -DIRECTORY_GRAPH = YES - -# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. Possible values are png, jpg, or gif -# If left blank png will be used. - -DOT_IMAGE_FORMAT = png - -# The tag DOT_PATH can be used to specify the path where the dot tool can be -# found. If left blank, it is assumed the dot tool can be found in the path. - -DOT_PATH = - -# The DOTFILE_DIRS tag can be used to specify one or more directories that -# contain dot files that are included in the documentation (see the -# \dotfile command). - -DOTFILE_DIRS = - -# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of -# nodes that will be shown in the graph. If the number of nodes in a graph -# becomes larger than this value, doxygen will truncate the graph, which is -# visualized by representing a node as a red box. Note that doxygen if the -# number of direct children of the root node in a graph is already larger than -# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note -# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. - -DOT_GRAPH_MAX_NODES = 50 - -# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the -# graphs generated by dot. A depth value of 3 means that only nodes reachable -# from the root by following a path via at most 3 edges will be shown. Nodes -# that lay further from the root node will be omitted. Note that setting this -# option to 1 or 2 may greatly reduce the computation time needed for large -# code bases. Also note that the size of a graph can be further restricted by -# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. - -MAX_DOT_GRAPH_DEPTH = 0 - -# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent -# background. This is disabled by default, because dot on Windows does not -# seem to support this out of the box. Warning: Depending on the platform used, -# enabling this option may lead to badly anti-aliased labels on the edges of -# a graph (i.e. they become hard to read). - -DOT_TRANSPARENT = NO - -# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output -# files in one run (i.e. multiple -o and -T options on the command line). This -# makes dot run faster, but since only newer versions of dot (>1.8.10) -# support this, this feature is disabled by default. - -DOT_MULTI_TARGETS = YES - -# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will -# generate a legend page explaining the meaning of the various boxes and -# arrows in the dot generated graphs. - -GENERATE_LEGEND = YES - -# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will -# remove the intermediate dot files that are used to generate -# the various graphs. - -DOT_CLEANUP = YES diff --git a/AVR/lib/RF24/FAQ b/AVR/lib/RF24/FAQ deleted file mode 100644 index eccd03a..0000000 --- a/AVR/lib/RF24/FAQ +++ /dev/null @@ -1,53 +0,0 @@ -/** - * @page FAQ Frequently Asked Questions - * - * @ref starting - * - * @ref hardware - * - * @ref range - * - * @ref issues - * - * @ref ram - * - * @ref tests - * - * @section starting Where do I start? - * - * See my blog post: - * Getting Started with nRF24L01+ on Arduino - * - * @section hardware Where can I buy some hardware? - * - * @li iTeadStudio sells the basic 2.4G Wireless nRF24L01+ Module for $4. Such a deal! - * @li MDfly.com sells the same unit, 2.4Ghz Wireless nRF24L01+ Transceiver Module for $6.95, but it ships from the US so it gets there a lot faster. Great place to get a few units and get started quickly. - * @li MDfly.com also has the nRF24L01 2.4GHz Transceiver Module w/ Power Amplifier for $13.95, which increases range dramatically and uses a chip antenna - * @li MDfly.com also has the 2.4GHz Transceiver Module w/ Power Amplifier with an external antenna for $19.95 - * - * @section range What is the range of these units? - * - * Here are some results from measurements I have taken, using the basic $4 iTeadStudio units. - * I recommend that everyone take their own measurements in their particular circumstances. - * - * @li non-plus unit, 2MBps (worst case), 41+ ft line of sight indoors, immediate dropoff with any deviation from LOS. (41 ft is as far as I can go in my house without turning a corner) - * @li Plus unit, 250kbps (best case), 46 ft around two corners indoors, 49 ft around one corner. More importantly, at 250k, packet loss is almost negligible through almost all of that range. - * @li Both units at 1MBps, plus unit gets about 10% range improvement over non-plus in almost all situations. - * - * @section issues What should I do if I find a problem? - * - * Please open an issue on github if you find any problems using it with any version of Arduino or Maple. - * - * @section ram What is the RAM footprint of this library? - * - * 16 bytes. A single radio object consumes 16 bytes of RAM, and the library - * does not use any other RAM statically. - * - * @section tests Why are the examples in the 'tests' directory failing? - * - * The sketches in the 'tests' directory are not for general use. - * Please use the examples in the 'examples' directory instead. - * - * The 'tests' directory is only for people making changes to the library - * to ensure that their changes do not break anything. - */ diff --git a/AVR/lib/RF24/README.md b/AVR/lib/RF24/README.md deleted file mode 100644 index c0e71c0..0000000 --- a/AVR/lib/RF24/README.md +++ /dev/null @@ -1,20 +0,0 @@ -# Arduino driver for nRF24L01 2.4GHz Wireless Transceiver - -Design Goals: This library is designed to be... - -* Maximally compliant with the intended operation of the chip -* Easy for beginners to use -* Consumed with a public interface that's similiar to other Arduino standard libraries -* Built against the standard SPI library. - -Please refer to: - -* [Documentation Main Page](http://maniacbug.github.com/RF24) -* [RF24 Class Documentation](http://maniacbug.github.com/RF24/classRF24.html) -* [Source Code](https://github.com/maniacbug/RF24) -* [Downloads](https://github.com/maniacbug/RF24/archives/master) -* [Chip Datasheet](http://www.nordicsemi.com/files/Product/data_sheet/nRF24L01_Product_Specification_v2_0.pdf) - -This chip uses the SPI bus, plus two chip control pins. Remember that pin 10 must still remain an output, or -the SPI hardware will go into 'slave' mode. - diff --git a/AVR/lib/RF24/RF24.c b/AVR/lib/RF24/RF24.c deleted file mode 100644 index 6543f63..0000000 --- a/AVR/lib/RF24/RF24.c +++ /dev/null @@ -1,1027 +0,0 @@ -/* - Copyright (C) 2011,2012 J. Coliz , jaseg - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - version 2 as published by the Free Software Foundation. - */ - -#include "nRF24L01.h" -#include "RF24_config.h" -#include "RF24.h" - -#ifndef RF24_NOUART -#include "uart.h" -#endif - -#include "util.h" - -#include -#include -#include -#include -#include -#include -#include - -#include - -#undef SERIAL_DEBUG -#ifdef SERIAL_DEBUG -#define IF_SERIAL_DEBUG(x) ({x;}) -#else -#define IF_SERIAL_DEBUG(x) -#endif - - -//Global status variables -uint8_t nrf24_wide_band = TRUE; /* 2Mbs data rate in use? */ -uint8_t nrf24_p_variant = FALSE; /* False for RF24L01 and TRUE for RF24L01P */ -uint8_t nrf24_payload_size = 32; /**< Fixed size of payloads */ -uint8_t nrf24_ack_payload_available = FALSE; /**< Whether there is an ack payload waiting */ -uint8_t nrf24_dynamic_payloads_enabled = FALSE; /**< Whether dynamic payloads are enabled. */ -uint8_t nrf24_ack_payload_length; /**< Dynamic size of pending ack payload. */ -uint64_t nrf24_pipe0_reading_address = 0; /**< Last address set on pipe 0 for reading. */ - - -inline void nrf24_csn(int mode) -{ - // Minimum ideal SPI bus speed is 2x data rate - // If we assume 2Mbs data rate and 16Mhz clock, a - // divider of 4 is the minimum we want. - // CLK:BUS 8Mhz:2Mhz, 16Mhz:4Mhz, or 20Mhz:5Mhz - // CHANGED!!! - setup_spi(SPI_MODE_0, SPI_MSB, SPI_NO_INTERRUPT, SPI_MSTR_CLK4); - RF24_CSN_PORT &= ~_BV(RF24_CSN_PIN); - RF24_CSN_PORT |= mode<> RX_P_NO) & 0x7); - uart_puts_p(PSTR("TX_FULL=")); - uart_putc((status & _BV(TX_FULL))?'1':'0'); - uart_putc('\n'); -} - -void nrf24_print_observe_tx(uint8_t value) -{ - uart_puts_p(PSTR("RF24 OBSERVE_TX=")); - uart_puthex(value); - uart_puts_p(PSTR(": POLS_CNT=")); - uart_puthex((value >> PLOS_CNT) & 0xF); - uart_puts_p(PSTR("ARC_CNT=")); - uart_puthex((value >> ARC_CNT) & 0xF); - uart_putc('\n'); -} - -void nrf24_print_byte_register(const char* name, uint8_t reg, uint8_t qty) -{ - if(!qty){ - qty = 1; - } - uart_puts_p(PSTR("RF24 ")); - uart_puts(name); - uart_putc('\t'); - if(strlen_P(name) < 8){ - uart_putc('\t'); - } - uart_putc(' '); - uart_putc('='); - while (qty--){ - uart_putc(' '); - uart_putc('0'); - uart_putc('x'); - uart_puthex(nrf24_read_register(reg++)); - } - uart_putc('\n'); -} - -void nrf24_print_address_register(const char* name, uint8_t reg, uint8_t qty) -{ - if(!qty){ - qty = 1; - } - uart_puts_p(PSTR("RF24 ")); - uart_puts(name); - uart_putc('\t'); - if(strlen_P(name) < 8){ - uart_putc('\t'); - } - uart_putc(' '); - uart_putc('='); - while (qty--) - { - uint8_t buffer[5]; - nrf24_read_register_buf(reg++,buffer,sizeof(buffer)); - uart_putc(' '); - uart_putc('0'); - uart_putc('x'); - uint8_t* bufptr = buffer + sizeof(buffer); - while( --bufptr >= buffer ){ - uart_puthex(*bufptr); - } - } - uart_putc('\n'); -} -#endif - - -void nrf24_setChannel(uint8_t channel) -{ - // TODO: This method could take advantage of the 'wide_band' calculation - // done in nrf24_setChannel() to require nrf24_certain channel spacing. - - nrf24_write_register(RF_CH,min(channel,127)); -} - - - -void nrf24_setPayloadSize(uint8_t size) -{ - nrf24_payload_size = min(size,MAX_PAYLOAD_SIZE); -} - - - -uint8_t nrf24_getPayloadSize(void) -{ - return nrf24_payload_size; -} - - - -static const char rf24_datarate_e_str_0[] PROGMEM = "1MBPS"; -static const char rf24_datarate_e_str_1[] PROGMEM = "2MBPS"; -static const char rf24_datarate_e_str_2[] PROGMEM = "250KBPS"; -static const char * const rf24_datarate_e_str_P[] PROGMEM = { - rf24_datarate_e_str_0, - rf24_datarate_e_str_1, - rf24_datarate_e_str_2, -}; -static const char rf24_model_e_str_0[] PROGMEM = "nRF24L01"; -static const char rf24_model_e_str_1[] PROGMEM = "nRF24L01+"; -static const char * const rf24_model_e_str_P[] PROGMEM = { - rf24_model_e_str_0, - rf24_model_e_str_1, -}; -static const char rf24_crclength_e_str_0[] PROGMEM = "Disabled"; -static const char rf24_crclength_e_str_1[] PROGMEM = "8 bits"; -static const char rf24_crclength_e_str_2[] PROGMEM = "16 bits" ; -static const char * const rf24_crclength_e_str_P[] PROGMEM = { - rf24_crclength_e_str_0, - rf24_crclength_e_str_1, - rf24_crclength_e_str_2, -}; -static const char rf24_pa_dbm_e_str_0[] PROGMEM = "PA_MIN"; -static const char rf24_pa_dbm_e_str_1[] PROGMEM = "PA_LOW"; -static const char rf24_pa_dbm_e_str_2[] PROGMEM = "LA_MED"; -static const char rf24_pa_dbm_e_str_3[] PROGMEM = "PA_HIGH"; -static const char * const rf24_pa_dbm_e_str_P[] PROGMEM = { - rf24_pa_dbm_e_str_0, - rf24_pa_dbm_e_str_1, - rf24_pa_dbm_e_str_2, - rf24_pa_dbm_e_str_3, -}; - -#ifndef RF24_NOUART -void nrf24_printDetails(void) -{ - nrf24_print_status(nrf24_get_status()); - - nrf24_print_address_register(PSTR("RX_ADDR_P0-1"),RX_ADDR_P0,2); - nrf24_print_byte_register(PSTR("RX_ADDR_P2-5"),RX_ADDR_P2,4); - nrf24_print_address_register(PSTR("TX_ADDR"),TX_ADDR,1); - - nrf24_print_byte_register(PSTR("RX_PW_P0-6"),RX_PW_P0,6); - nrf24_print_byte_register(PSTR("EN_AA"),EN_AA,1); - nrf24_print_byte_register(PSTR("EN_RXADDR"),EN_RXADDR,1); - nrf24_print_byte_register(PSTR("RF_CH"),RF_CH,1); - nrf24_print_byte_register(PSTR("RF_SETUP"),RF_SETUP,1); - nrf24_print_byte_register(PSTR("CONFIG"),CONFIG,1); - nrf24_print_byte_register(PSTR("DYNPD/FEATURE"),DYNPD,2); - - uart_puts_p(PSTR("RF24 Data Rate\t = ")); - uart_puts_p((const char*)pgm_read_word(&rf24_datarate_e_str_P[nrf24_getDataRate()])); - uart_putc('\n'); - uart_puts_p(PSTR("RF24 Model\t\t = ")); - uart_puts_p((const char*)pgm_read_word(&rf24_model_e_str_P[nrf24_isPVariant()])); - uart_putc('\n'); - uart_puts_p(PSTR("RF24 CRC Length\t = ")); - uart_puts_p((const char*)pgm_read_word(&rf24_crclength_e_str_P[nrf24_getCRCLength()])); - uart_putc('\n'); - uart_puts_p(PSTR("RF24 PA Power\t = ")); - uart_puts_p((const char*)pgm_read_word(&rf24_pa_dbm_e_str_P[nrf24_getPALevel()])); - uart_putc('\n'); -} -#endif - - -void nrf24_begin(void) -{ - // Initialize pins - RF24_CE_DDR |= _BV(RF24_CE_PIN); - RF24_CSN_DDR |= _BV(RF24_CSN_PIN); - - // Initialize SPI bus -// spi_init(); - - nrf24_ce(LOW); - nrf24_csn(HIGH); - - // Must allow the radio time to settle else configuration bits will not necessarily stick. - // This is actually only required following power up but some settling time also appears to - // be required after resets too. For full coverage, we'll always assume the worst. - // Enabling 16b CRC is by far the most obvious case if the wrong timing is used - or skipped. - // Technically we require 4.5ms + 14us as a worst case. We'll just call it 5ms for good measure. - // WARNING: Delay is based on P-variant whereby non-P *may* require different timing. - _delay_ms( 5 ) ; - - // Set 1500uS (minimum for 32B payload in ESB@250KBPS) timeouts, to make testing a little easier - // WARNING: If this is ever lowered, either 250KBS mode with AA is broken or maximum packet - // sizes must never be used. See documentation for a more complete explanation. - nrf24_write_register(SETUP_RETR,(0x4 << ARD) | (0xF << ARC)); - - // Restore our default PA level - nrf24_setPALevel( RF24_PA_MAX ) ; - - // Determine if this is a p or non-p RF24 module and then - // reset our data rate back to default value. This works - // because a non-P variant won't allow the data rate to - // be set to 250Kbps. - if( nrf24_setDataRate( RF24_250KBPS ) ) - { - nrf24_p_variant = TRUE ; - } - - // Then set the data rate to the slowest (and most reliable) speed supported by all - // hardware. - nrf24_setDataRate( RF24_1MBPS ) ; - - // Initialize CRC and request 2-byte (16bit) CRC - nrf24_setCRCLength( RF24_CRC_16 ) ; - - // Disable dynamic payloads, to match dynamic_payloads_enabled setting - nrf24_write_register(DYNPD,0); - - // Reset current status - // Notice reset and nrf24_flush is the last thing we do - nrf24_write_register(STATUS,_BV(RX_DR) | _BV(TX_DS) | _BV(MAX_RT) ); - - // Set up default configuration. Callers can always change it later. - // This channel should be universally safe and not bleed over into adjacent - // spectrum. - nrf24_setChannel(76); - - // Flush buffers - nrf24_flush_rx(); - nrf24_flush_tx(); -} - - - -void nrf24_startListening(void) -{ - nrf24_write_register(CONFIG, nrf24_read_register(CONFIG) | _BV(PWR_UP) | _BV(PRIM_RX)); - nrf24_write_register(STATUS, _BV(RX_DR) | _BV(TX_DS) | _BV(MAX_RT) ); - - // Restore the pipe0 adddress, if exists - if (nrf24_pipe0_reading_address) - nrf24_write_register_buf(RX_ADDR_P0, (const uint8_t*)(&nrf24_pipe0_reading_address), 5); - - // Flush buffers -// nrf24_flush_rx(); -// nrf24_flush_tx(); - - // Go! - nrf24_ce(HIGH); - - // wait for the radio to come up (130us actually only needed) - _delay_us(130); -} - - - -void nrf24_stopListening(void) -{ - nrf24_ce(LOW); - nrf24_flush_tx(); - nrf24_flush_rx(); -} - - - -void nrf24_powerDown(void) -{ - nrf24_write_register(CONFIG,nrf24_read_register(CONFIG) & ~_BV(PWR_UP)); -} - - - -void nrf24_powerUp(void) -{ - nrf24_write_register(CONFIG,nrf24_read_register(CONFIG) | _BV(PWR_UP)); -} - - - -uint8_t nrf24_write( const void* buf, uint8_t len ) -{ - uint8_t result = FALSE; - - // Begin the write - nrf24_startWrite(buf,len); - - // ------------ - // At this point we could return from a non-blocking write, and then call - // the rest after an interrupt - // FIXME - - // Instead, we are going to block here until we get TX_DS (transmission completed and ack'd) - // or MAX_RT (maximum retries, transmission failed). Also, we'll timeout in case the radio - // is flaky and we get neither. - - // IN the end, the send should be blocking. It comes back in 60ms worst case, or much faster - // if I tighted up the retry logic. (Default settings will be 1500us. - // Monitor the send - uint8_t observe_tx; - uint8_t status; - const uint32_t timeout = 500000; //ms to wait for timeout - uint32_t cycles = 0; - do - { - status = nrf24_read_register_buf(OBSERVE_TX,&observe_tx,1); - IF_SERIAL_DEBUG(uart_puthex(observe_tx)); - cycles++; - } - while( ! ( status & ( _BV(TX_DS) | _BV(MAX_RT) ) ) && ( cycles < timeout ) ); - - // The part above is what you could recreate with your own interrupt handler, - // and then call this when you got an interrupt - // ------------ - - // Call this when you get an interrupt - // The status tells us three things - // * The send was successful (TX_DS) - // * The send failed, too many retries (MAX_RT) - // * There is an ack packet waiting (RX_DR) - uint8_t tx_ok=0, tx_fail=0; - nrf24_whatHappened(&tx_ok,&tx_fail,&nrf24_ack_payload_available); - - //printf("%u%u%u\r\n",tx_ok,tx_fail,ack_payload_available); - - result = tx_ok; - IF_SERIAL_DEBUG(uart_puts(result?"...OK.":"...Failed")); - - // Handle the ack packet - if ( nrf24_ack_payload_available ) - { - nrf24_ack_payload_length = nrf24_getDynamicPayloadSize(); -#ifdef SERIAL_DEBUG - uart_puts_p(PSTR("RF24 [AckPacket]/")); - uart_putdec(uart_ack_payload_length); - uart_putc('\n'); -#endif//SERIAL_DEBUG - } - - // Yay, we are done. - - // Power down - nrf24_powerDown(); - - // Flush buffers (Is this a relic of past experimentation, and not needed anymore??) - nrf24_flush_tx(); - - return result; -} - - -void nrf24_startWrite( const void* buf, uint8_t len ) -{ - // Transmitter power-up - nrf24_write_register(CONFIG, ( nrf24_read_register(CONFIG) | _BV(PWR_UP) ) & ~_BV(PRIM_RX) ); - _delay_us(150); - - // Send the payload - nrf24_write_payload( buf, len ); - - // Allons! - nrf24_ce(HIGH); - _delay_us(15); - nrf24_ce(LOW); -} - - - -uint8_t nrf24_getDynamicPayloadSize(void) -{ - uint8_t result = 0; - - nrf24_csn(LOW); - send_spi( R_RX_PL_WID ); - result = send_spi(0xff); - nrf24_csn(HIGH); - - return result; -} - - - -uint8_t nrf24_available(void) -{ - return nrf24_available_pipe(NULL); -} - - - -uint8_t nrf24_available_pipe(uint8_t* pipe_num) -{ - uint8_t status = nrf24_get_status(); - - // Too noisy, enable if you really want lots o data!! - //IF_SERIAL_DEBUG(print_status(status)); - - uint8_t result = ( status & _BV(RX_DR) ); - - if (result) - { - // If the caller wants the pipe number, include that - if ( pipe_num ) - *pipe_num = ( status >> RX_P_NO ) & 7; - - // Clear the status bit - - // ??? Should this REALLY be cleared now? Or wait until we - // actually READ the payload? - - nrf24_write_register(STATUS,_BV(RX_DR) ); - - // Handle ack payload receipt - if ( status & _BV(TX_DS) ) - { - nrf24_write_register(STATUS,_BV(TX_DS)); - } - } - - return result; -} - - - -uint8_t nrf24_read( void* buf, uint8_t len ) -{ - // Fetch the payload - nrf24_read_payload( buf, len ); - - // was this the last of the data available? - return nrf24_read_register(FIFO_STATUS) & _BV(RX_EMPTY); -} - - - -void nrf24_whatHappened(uint8_t *tx_ok, uint8_t *tx_fail, uint8_t *rx_ready) -{ - // Read the status & reset the status in one easy call - // Or is that such a good idea? - uint8_t status = nrf24_write_register(STATUS,_BV(RX_DR) | _BV(TX_DS) | _BV(MAX_RT) ); - - // Report to the user what happened - *tx_ok = status & _BV(TX_DS); - *tx_fail = status & _BV(MAX_RT); - *rx_ready = status & _BV(RX_DR); -} - - - -void nrf24_openWritingPipe(uint64_t value) -{ - // Note that AVR 8-bit uC's store this LSB first, and the NRF24L01(+) - // expects it LSB first too, so we're good. - - nrf24_write_register_buf(RX_ADDR_P0, (uint8_t*)(&value), 5); - nrf24_write_register_buf(TX_ADDR, (uint8_t*)(&value), 5); - - nrf24_write_register(RX_PW_P0,min(nrf24_payload_size,MAX_PAYLOAD_SIZE)); -} - - - -static const uint8_t child_pipe[] PROGMEM = -{ - RX_ADDR_P0, RX_ADDR_P1, RX_ADDR_P2, RX_ADDR_P3, RX_ADDR_P4, RX_ADDR_P5 -}; -static const uint8_t child_payload_size[] PROGMEM = -{ - RX_PW_P0, RX_PW_P1, RX_PW_P2, RX_PW_P3, RX_PW_P4, RX_PW_P5 -}; -static const uint8_t child_pipe_enable[] PROGMEM = -{ - ERX_P0, ERX_P1, ERX_P2, ERX_P3, ERX_P4, ERX_P5 -}; - -void nrf24_openReadingPipe(uint8_t child, uint64_t address) -{ - // If this is pipe 0, cache the address. This is needed because - // openWritingPipe() will overwrite the pipe 0 address, so - // startListening() will have to restore it. - if (child == 0) - nrf24_pipe0_reading_address = address; - - if (child <= 6) - { - // For pipes 2-5, only write the LSB - if ( child < 2 ) - nrf24_write_register_buf(pgm_read_byte(&child_pipe[child]), (const uint8_t*)(&address), 5); - else - nrf24_write_register_buf(pgm_read_byte(&child_pipe[child]), (const uint8_t*)(&address), 1); - - nrf24_write_register(pgm_read_byte(&child_payload_size[child]), nrf24_payload_size); - - // Note it would be more efficient to set all of the bits for all open - // pipes at once. However, I thought it would make the calling code - // more simple to do it this way. - nrf24_write_register(EN_RXADDR,nrf24_read_register(EN_RXADDR) | _BV(pgm_read_byte(&child_pipe_enable[child]))); - } -} - - - -void nrf24_toggle_features(void) -{ - nrf24_csn(LOW); - send_spi( ACTIVATE ); - send_spi( 0x73 ); - nrf24_csn(HIGH); -} - - - -void nrf24_enableDynamicPayloads(void) -{ - // Enable dynamic payload throughout the system - nrf24_write_register(FEATURE,nrf24_read_register(FEATURE) | _BV(EN_DPL) ); - - // If it didn't work, the features are not enabled - if ( ! nrf24_read_register(FEATURE) ) - { - // So enable them and try again - nrf24_toggle_features(); - nrf24_write_register(FEATURE,nrf24_read_register(FEATURE) | _BV(EN_DPL) ); - } - -#ifdef SERIAL_DEBUG - uart_puts_p(PSTR("RF24 FEATURE=")); - uart_putdec(read_register(FEATURE)); - uart_putc('\n'); -#endif//SERIAL_DEBUG - - // Enable dynamic payload on all pipes - // - // Not sure the use case of only having dynamic payload on nrf24_certain - // pipes, so the library does not support it. - nrf24_write_register(DYNPD,nrf24_read_register(DYNPD) | _BV(DPL_P5) | _BV(DPL_P4) | _BV(DPL_P3) | _BV(DPL_P2) | _BV(DPL_P1) | _BV(DPL_P0)); - - nrf24_dynamic_payloads_enabled = TRUE; -} - - - -void nrf24_enableAckPayload(void) -{ - // - // enable ack payload and dynamic payload features - // - - nrf24_write_register(FEATURE,nrf24_read_register(FEATURE) | _BV(EN_ACK_PAY) | _BV(EN_DPL) ); - - // If it didn't work, the features are not enabled - if ( ! nrf24_read_register(FEATURE) ) - { - // So enable them and try again - nrf24_toggle_features(); - nrf24_write_register(FEATURE,nrf24_read_register(FEATURE) | _BV(EN_ACK_PAY) | _BV(EN_DPL) ); - } - -#ifdef SERIAL_DEBUG - uart_puts_p(PSTR("RF24 FEATURE=")); - uart_putdec(read_register(FEATURE)); - uart_putc('\n'); -#endif - - // - // Enable dynamic payload on pipes 0 & 1 - // - - nrf24_write_register(DYNPD,nrf24_read_register(DYNPD) | _BV(DPL_P1) | _BV(DPL_P0)); -} - - - -void nrf24_writeAckPayload(uint8_t pipe, const void* buf, uint8_t len) -{ - const uint8_t* current = (const uint8_t*)(buf); - - nrf24_csn(LOW); - send_spi( W_ACK_PAYLOAD | ( pipe & 7 ) ); - uint8_t data_len = min(len,MAX_PAYLOAD_SIZE); - while ( data_len-- ) - send_spi(*current++); - - nrf24_csn(HIGH); -} - - - -uint8_t nrf24_isAckPayloadAvailable(void) -{ - uint8_t result = nrf24_ack_payload_available; - nrf24_ack_payload_available = FALSE; - return result; -} - - - -uint8_t nrf24_isPVariant(void) -{ - return nrf24_p_variant ; -} - - - -void nrf24_setAutoAck(uint8_t enable) -{ - if ( enable ) - nrf24_write_register(EN_AA, 0x3F); - else - nrf24_write_register(EN_AA, 0); -} - - - -void nrf24_setAutoAck_pipe( uint8_t pipe, uint8_t enable ) -{ - if ( pipe <= 6 ) - { - uint8_t en_aa = nrf24_read_register( EN_AA ) ; - if( enable ) - { - en_aa |= _BV(pipe) ; - } - else - { - en_aa &= ~_BV(pipe) ; - } - nrf24_write_register( EN_AA, en_aa ) ; - } -} - - - -uint8_t nrf24_testCarrier(void) -{ - return ( nrf24_read_register(CD) & 1 ); -} - - - -uint8_t nrf24_testRPD(void) -{ - return ( nrf24_read_register(RPD) & 1 ) ; -} - - - -void nrf24_setPALevel(rf24_pa_dbm_e level) -{ - uint8_t setup = nrf24_read_register(RF_SETUP) ; - setup &= ~(_BV(RF_PWR_LOW) | _BV(RF_PWR_HIGH)) ; - - // switch uses RAM (evil!) - if ( level == RF24_PA_MAX ) - { - setup |= (_BV(RF_PWR_LOW) | _BV(RF_PWR_HIGH)) ; - } - else if ( level == RF24_PA_HIGH ) - { - setup |= _BV(RF_PWR_HIGH) ; - } - else if ( level == RF24_PA_LOW ) - { - setup |= _BV(RF_PWR_LOW); - } - else if ( level == RF24_PA_MIN ) - { - // nothing - } - else if ( level == RF24_PA_ERROR ) - { - // On error, go to maximum PA - setup |= (_BV(RF_PWR_LOW) | _BV(RF_PWR_HIGH)) ; - } - - nrf24_write_register( RF_SETUP, setup ) ; -} - - - -rf24_pa_dbm_e nrf24_getPALevel(void) -{ - rf24_pa_dbm_e result = RF24_PA_ERROR ; - uint8_t power = nrf24_read_register(RF_SETUP) & (_BV(RF_PWR_LOW) | _BV(RF_PWR_HIGH)) ; - - // switch uses RAM (evil!) - if ( power == (_BV(RF_PWR_LOW) | _BV(RF_PWR_HIGH)) ) - { - result = RF24_PA_MAX ; - } - else if ( power == _BV(RF_PWR_HIGH) ) - { - result = RF24_PA_HIGH ; - } - else if ( power == _BV(RF_PWR_LOW) ) - { - result = RF24_PA_LOW ; - } - else - { - result = RF24_PA_MIN ; - } - - return result ; -} - - - -uint8_t nrf24_setDataRate(rf24_datarate_e speed) -{ - uint8_t setup = nrf24_read_register(RF_SETUP) ; - - // HIGH and LOW '00' is 1Mbs - our default - nrf24_wide_band = FALSE ; - setup &= ~(_BV(RF_DR_LOW) | _BV(RF_DR_HIGH)) ; - if( speed == RF24_250KBPS ) - { - // Must set the RF_DR_LOW to 1; RF_DR_HIGH (used to be RF_DR) is already 0 - // Making it '10'. - nrf24_wide_band = FALSE ; - setup |= _BV( RF_DR_LOW ) ; - } - else - { - // Set 2Mbs, RF_DR (RF_DR_HIGH) is set 1 - // Making it '01' - if ( speed == RF24_2MBPS ) - { - nrf24_wide_band = TRUE ; - setup |= _BV(RF_DR_HIGH); - } - else - { - // 1Mbs - nrf24_wide_band = FALSE ; - } - } - nrf24_write_register(RF_SETUP,setup); - - // Verify our result - if ( nrf24_read_register(RF_SETUP) == setup ){ - return TRUE; - } - else{ - nrf24_wide_band = FALSE; - } - return FALSE; -} - - - -rf24_datarate_e nrf24_getDataRate( void ) -{ - rf24_datarate_e result ; - uint8_t dr = nrf24_read_register(RF_SETUP) & (_BV(RF_DR_LOW) | _BV(RF_DR_HIGH)); - - // switch uses RAM (evil!) - // Order matters in our case below - if ( dr == _BV(RF_DR_LOW) ) - { - // '10' = 250KBPS - result = RF24_250KBPS ; - } - else if ( dr == _BV(RF_DR_HIGH) ) - { - // '01' = 2MBPS - result = RF24_2MBPS ; - } - else - { - // '00' = 1MBPS - result = RF24_1MBPS ; - } - return result ; -} - - - -void nrf24_setCRCLength(rf24_crclength_e length) -{ - uint8_t config = nrf24_read_register(CONFIG) & ~( _BV(CRCO) | _BV(EN_CRC)) ; - - // switch uses RAM (evil!) - if ( length == RF24_CRC_DISABLED ) - { - // Do nothing, we turned it off above. - } - else if ( length == RF24_CRC_8 ) - { - config |= _BV(EN_CRC); - } - else - { - config |= _BV(EN_CRC); - config |= _BV( CRCO ); - } - nrf24_write_register( CONFIG, config ) ; -} - - - -rf24_crclength_e nrf24_getCRCLength(void) -{ - rf24_crclength_e result = RF24_CRC_DISABLED; - uint8_t config = nrf24_read_register(CONFIG) & ( _BV(CRCO) | _BV(EN_CRC)) ; - - if ( config & _BV(EN_CRC ) ) - { - if ( config & _BV(CRCO) ) - result = RF24_CRC_16; - else - result = RF24_CRC_8; - } - - return result; -} - - - -void nrf24_disableCRC( void ) -{ - uint8_t disable = nrf24_read_register(CONFIG) & ~_BV(EN_CRC) ; - nrf24_write_register( CONFIG, disable ) ; -} - - -void nrf24_setRetries(uint8_t delay, uint8_t count) -{ - nrf24_write_register(SETUP_RETR,(delay&0xf)< - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - version 2 as published by the Free Software Foundation. - */ - -#include "nRF24L01.h" -#include "RF24_config.h" -#include "RF24.h" - -inline void nrf24_csn(int mode) -{ - // Minimum ideal SPI bus speed is 2x data rate - // If we assume 2Mbs data rate and 16Mhz clock, a - // divider of 4 is the minimum we want. - // CLK:BUS 8Mhz:2Mhz, 16Mhz:4Mhz, or 20Mhz:5Mhz - spi_setup(SPI_MSBFIRST | SPI_MODE0 | SPI_CLOCK_DIV4); - CSN_PORT &= ~_BV(CSN_PIN); - CSN_PORT |= mode<> RX_P_NO) & 0x7); - uart_puts_p(PSTR("TX_FULL=")); - uart_putc((status & _BV(TX_FULL))?'1':'0'); - uart_putc('\n'); - -} - -void nrf24_print_observe_tx(uint8_t value) -{ - uart_puts_p(PSTR("RF24 OBSERVE_TX=")); - uart_puthex(value); - uart_puts_p(PSTR(": POLS_CNT=")); - uart_puthex((value >> PLOS_CNT) & 0xF); - uart_puts_p(PSTR("ARC_CNT=")); - uart_puthex((value >> ARC_CNT) & 0xF); - uart_putc('\n'); -} - - - -void nrf24_print_byte_register(const char* name, uint8_t reg, uint8_t qty) -{ - uart_puts_p("RF24 "); - uart_puts(name); - uart_putc('\t'); - if(strlen_P(name) < 8){ - uart_putc('\t'); - } - uart_putc(' '); - uart_putc('='); - while (qty--){ - uart_putc(' '); - uart_putc('0'); - uart_putc('x'); - uart_puthex(read_register(reg++)); - } - uart_putc('\n'); -} - - - -void nrf24_print_address_register(const char* name, uint8_t reg, uint8_t qty) -{ - uart_puts_p("RF24 "); - uart_puts(name); - uart_putc('\t'); - if(strlen_P(name) < 8){ - uart_putc('\t'); - } - uart_putc(' '); - uart_putc('='); - while (qty--) - { - uint8_t buffer[5]; - read_register(reg++,buffer,sizeof(buffer)); - uart_putc(' '); - uart_putc('0'); - uart_putc('x'); - uint8_t* bufptr = buffer + sizeof(buffer); - while( --bufptr >= buffer ){ - uart_puthex(*bufptr); - } - } - uart_putc('\n'); -} - - - -void nrf24_setChannel(uint8_t channel) -{ - // TODO: This method could take advantage of the 'wide_band' calculation - // done in setChannel() to require certain channel spacing. - - const uint8_t max_channel = 127; - write_register(RF_CH,min(channel,max_channel)); -} - - - -void nrf24_setPayloadSize(uint8_t size) -{ - const uint8_t max_payload_size = 32; - payload_size = min(size,max_payload_size); -} - - - -uint8_t nrf24_getPayloadSize(void) -{ - return payload_size; -} - - - -static const char rf24_datarate_e_str_0[] PROGMEM = "1MBPS"; -static const char rf24_datarate_e_str_1[] PROGMEM = "2MBPS"; -static const char rf24_datarate_e_str_2[] PROGMEM = "250KBPS"; -static const char * const rf24_datarate_e_str_P[] PROGMEM = { - rf24_datarate_e_str_0, - rf24_datarate_e_str_1, - rf24_datarate_e_str_2, -}; -static const char rf24_model_e_str_0[] PROGMEM = "nRF24L01"; -static const char rf24_model_e_str_1[] PROGMEM = "nRF24L01+"; -static const char * const rf24_model_e_str_P[] PROGMEM = { - rf24_model_e_str_0, - rf24_model_e_str_1, -}; -static const char rf24_crclength_e_str_0[] PROGMEM = "Disabled"; -static const char rf24_crclength_e_str_1[] PROGMEM = "8 bits"; -static const char rf24_crclength_e_str_2[] PROGMEM = "16 bits" ; -static const char * const rf24_crclength_e_str_P[] PROGMEM = { - rf24_crclength_e_str_0, - rf24_crclength_e_str_1, - rf24_crclength_e_str_2, -}; -static const char rf24_pa_dbm_e_str_0[] PROGMEM = "PA_MIN"; -static const char rf24_pa_dbm_e_str_1[] PROGMEM = "PA_LOW"; -static const char rf24_pa_dbm_e_str_2[] PROGMEM = "LA_MED"; -static const char rf24_pa_dbm_e_str_3[] PROGMEM = "PA_HIGH"; -static const char * const rf24_pa_dbm_e_str_P[] PROGMEM = { - rf24_pa_dbm_e_str_0, - rf24_pa_dbm_e_str_1, - rf24_pa_dbm_e_str_2, - rf24_pa_dbm_e_str_3, -}; - -void nrf24_printDetails(void) -{ - print_status(get_status()); - - print_address_register(PSTR("RX_ADDR_P0-1"),RX_ADDR_P0,2); - print_byte_register(PSTR("RX_ADDR_P2-5"),RX_ADDR_P2,4); - print_address_register(PSTR("TX_ADDR"),TX_ADDR); - - print_byte_register(PSTR("RX_PW_P0-6"),RX_PW_P0,6); - print_byte_register(PSTR("EN_AA"),EN_AA); - print_byte_register(PSTR("EN_RXADDR"),EN_RXADDR); - print_byte_register(PSTR("RF_CH"),RF_CH); - print_byte_register(PSTR("RF_SETUP"),RF_SETUP); - print_byte_register(PSTR("CONFIG"),CONFIG); - print_byte_register(PSTR("DYNPD/FEATURE"),DYNPD,2); - - uart_puts_p(PSTR("RF24 Data Rate\t = ")); - uart_puts(pgm_read_word(&rf24_datarate_e_str_P[getDataRate()])); - uart_putc('\n'); - uart_puts_p(PSTR("RF24 Model\t\t = ")); - uart_puts(pgm_read_word(&rf24_model_e_str_P[isPVariant()])); - uart_putc('\n'); - uart_puts_p(PSTR("RF24 CRC Length\t = ")); - uart_puts(pgm_read_word(&rf24_crclength_e_str_P[getCRCLength()])); - uart_putc('\n'); - uart_puts_p(PSTR("RF24 PA Power\t = ")); - uart_puts(pgm_read_word(&rf24_pa_dbm_e_str_P[getPALevel()])); - uart_putc('\n'); -} - - - -void nrf24_begin(void) -{ - // Initialize pins - CE_DDR |= _BV(CE_PIN); - CSN_DDR |= _BV(CSN_PIN); - - // Initialize SPI bus - spi_begin(); - - ce(LOW); - csn(HIGH); - - // Must allow the radio time to settle else configuration bits will not necessarily stick. - // This is actually only required following power up but some settling time also appears to - // be required after resets too. For full coverage, we'll always assume the worst. - // Enabling 16b CRC is by far the most obvious case if the wrong timing is used - or skipped. - // Technically we require 4.5ms + 14us as a worst case. We'll just call it 5ms for good measure. - // WARNING: Delay is based on P-variant whereby non-P *may* require different timing. - delay( 5 ) ; - - // Set 1500uS (minimum for 32B payload in ESB@250KBPS) timeouts, to make testing a little easier - // WARNING: If this is ever lowered, either 250KBS mode with AA is broken or maximum packet - // sizes must never be used. See documentation for a more complete explanation. - write_register(SETUP_RETR,(B0100 << ARD) | (B1111 << ARC)); - - // Restore our default PA level - setPALevel( RF24_PA_MAX ) ; - - // Determine if this is a p or non-p RF24 module and then - // reset our data rate back to default value. This works - // because a non-P variant won't allow the data rate to - // be set to 250Kbps. - if( setDataRate( RF24_250KBPS ) ) - { - p_variant = true ; - } - - // Then set the data rate to the slowest (and most reliable) speed supported by all - // hardware. - setDataRate( RF24_1MBPS ) ; - - // Initialize CRC and request 2-byte (16bit) CRC - setCRCLength( RF24_CRC_16 ) ; - - // Disable dynamic payloads, to match dynamic_payloads_enabled setting - write_register(DYNPD,0); - - // Reset current status - // Notice reset and flush is the last thing we do - write_register(STATUS,_BV(RX_DR) | _BV(TX_DS) | _BV(MAX_RT) ); - - // Set up default configuration. Callers can always change it later. - // This channel should be universally safe and not bleed over into adjacent - // spectrum. - setChannel(76); - - // Flush buffers - flush_rx(); - flush_tx(); -} - - - -void nrf24_startListening(void) -{ - write_register(CONFIG, read_register(CONFIG) | _BV(PWR_UP) | _BV(PRIM_RX)); - write_register(STATUS, _BV(RX_DR) | _BV(TX_DS) | _BV(MAX_RT) ); - - // Restore the pipe0 adddress, if exists - if (pipe0_reading_address) - write_register(RX_ADDR_P0, (const uint8_t*)(pipe0_reading_address), 5); - - // Flush buffers - flush_rx(); - flush_tx(); - - // Go! - ce(HIGH); - - // wait for the radio to come up (130us actually only needed) - delayMicroseconds(130); -} - - - -void nrf24_stopListening(void) -{ - ce(LOW); - flush_tx(); - flush_rx(); -} - - - -void nrf24_powerDown(void) -{ - write_register(CONFIG,read_register(CONFIG) & ~_BV(PWR_UP)); -} - - - -void nrf24_powerUp(void) -{ - write_register(CONFIG,read_register(CONFIG) | _BV(PWR_UP)); -} - - - -bool nrf24_write( const void* buf, uint8_t len ) -{ - bool result = false; - - // Begin the write - startWrite(buf,len); - - // ------------ - // At this point we could return from a non-blocking write, and then call - // the rest after an interrupt - - // Instead, we are going to block here until we get TX_DS (transmission completed and ack'd) - // or MAX_RT (maximum retries, transmission failed). Also, we'll timeout in case the radio - // is flaky and we get neither. - - // IN the end, the send should be blocking. It comes back in 60ms worst case, or much faster - // if I tighted up the retry logic. (Default settings will be 1500us. - // Monitor the send - uint8_t observe_tx; - uint8_t status; - uint32_t sent_at = millis(); - const uint32_t timeout = 500; //ms to wait for timeout - do - { - status = read_register(OBSERVE_TX,&observe_tx,1); - IF_SERIAL_DEBUG(uart_puthex(observe_tx)); - } - while( ! ( status & ( _BV(TX_DS) | _BV(MAX_RT) ) ) && ( millis() - sent_at < timeout ) ); - - // The part above is what you could recreate with your own interrupt handler, - // and then call this when you got an interrupt - // ------------ - - // Call this when you get an interrupt - // The status tells us three things - // * The send was successful (TX_DS) - // * The send failed, too many retries (MAX_RT) - // * There is an ack packet waiting (RX_DR) - bool tx_ok, tx_fail; - whatHappened(tx_ok,tx_fail,ack_payload_available); - - //printf("%u%u%u\r\n",tx_ok,tx_fail,ack_payload_available); - - result = tx_ok; - IF_SERIAL_DEBUG(uart_puts(result?"...OK.":"...Failed")); - - // Handle the ack packet - if ( ack_payload_available ) - { - ack_payload_length = getDynamicPayloadSize(); -#ifdef SERIAL_DEBUG - uart_puts_p(PSTR("RF24 [AckPacket]/")); - uart_putdec(uart_ack_payload_length); - uart_putc('\n'); -#endif//SERIAL_DEBUG - } - - // Yay, we are done. - - // Power down - powerDown(); - - // Flush buffers (Is this a relic of past experimentation, and not needed anymore??) - flush_tx(); - - return result; -} - - -void nrf24_startWrite( const void* buf, uint8_t len ) -{ - // Transmitter power-up - write_register(CONFIG, ( read_register(CONFIG) | _BV(PWR_UP) ) & ~_BV(PRIM_RX) ); - delayMicroseconds(150); - - // Send the payload - write_payload( buf, len ); - - // Allons! - ce(HIGH); - delayMicroseconds(15); - ce(LOW); -} - - - -uint8_t nrf24_getDynamicPayloadSize(void) -{ - uint8_t result = 0; - - csn(LOW); - spi_transfer( R_RX_PL_WID ); - result = spi_transfer(0xff); - csn(HIGH); - - return result; -} - - - -bool nrf24_available(void) -{ - return available(NULL); -} - - - -bool nrf24_available(uint8_t* pipe_num) -{ - uint8_t status = get_status(); - - // Too noisy, enable if you really want lots o data!! - //IF_SERIAL_DEBUG(print_status(status)); - - bool result = ( status & _BV(RX_DR) ); - - if (result) - { - // If the caller wants the pipe number, include that - if ( pipe_num ) - *pipe_num = ( status >> RX_P_NO ) & B111; - - // Clear the status bit - - // ??? Should this REALLY be cleared now? Or wait until we - // actually READ the payload? - - write_register(STATUS,_BV(RX_DR) ); - - // Handle ack payload receipt - if ( status & _BV(TX_DS) ) - { - write_register(STATUS,_BV(TX_DS)); - } - } - - return result; -} - - - -bool nrf24_read( void* buf, uint8_t len ) -{ - // Fetch the payload - read_payload( buf, len ); - - // was this the last of the data available? - return read_register(FIFO_STATUS) & _BV(RX_EMPTY); -} - - - -void nrf24_whatHappened(bool& tx_ok,bool& tx_fail,bool& rx_ready) -{ - // Read the status & reset the status in one easy call - // Or is that such a good idea? - uint8_t status = write_register(STATUS,_BV(RX_DR) | _BV(TX_DS) | _BV(MAX_RT) ); - - // Report to the user what happened - tx_ok = status & _BV(TX_DS); - tx_fail = status & _BV(MAX_RT); - rx_ready = status & _BV(RX_DR); -} - - - -void nrf24_openWritingPipe(uint64_t value) -{ - // Note that AVR 8-bit uC's store this LSB first, and the NRF24L01(+) - // expects it LSB first too, so we're good. - - write_register(RX_ADDR_P0, (uint8_t*)(&value), 5); - write_register(TX_ADDR, (uint8_t*)(&value), 5); - - const uint8_t max_payload_size = 32; - write_register(RX_PW_P0,min(payload_size,max_payload_size)); -} - - - -static const uint8_t child_pipe[] PROGMEM = -{ - RX_ADDR_P0, RX_ADDR_P1, RX_ADDR_P2, RX_ADDR_P3, RX_ADDR_P4, RX_ADDR_P5 -}; -static const uint8_t child_payload_size[] PROGMEM = -{ - RX_PW_P0, RX_PW_P1, RX_PW_P2, RX_PW_P3, RX_PW_P4, RX_PW_P5 -}; -static const uint8_t child_pipe_enable[] PROGMEM = -{ - ERX_P0, ERX_P1, ERX_P2, ERX_P3, ERX_P4, ERX_P5 -}; - -void nrf24_openReadingPipe(uint8_t child, uint64_t address) -{ - // If this is pipe 0, cache the address. This is needed because - // openWritingPipe() will overwrite the pipe 0 address, so - // startListening() will have to restore it. - if (child == 0) - pipe0_reading_address = address; - - if (child <= 6) - { - // For pipes 2-5, only write the LSB - if ( child < 2 ) - write_register(pgm_read_byte(&child_pipe[child]), (const uint8_t*)(&address), 5); - else - write_register(pgm_read_byte(&child_pipe[child]), (const uint8_t*)(&address), 1); - - write_register(pgm_read_byte(&child_payload_size[child]),payload_size); - - // Note it would be more efficient to set all of the bits for all open - // pipes at once. However, I thought it would make the calling code - // more simple to do it this way. - write_register(EN_RXADDR,read_register(EN_RXADDR) | _BV(pgm_read_byte(&child_pipe_enable[child]))); - } -} - - - -void nrf24_toggle_features(void) -{ - csn(LOW); - spi_transfer( ACTIVATE ); - spi_transfer( 0x73 ); - csn(HIGH); -} - - - -void nrf24_enableDynamicPayloads(void) -{ - // Enable dynamic payload throughout the system - write_register(FEATURE,read_register(FEATURE) | _BV(EN_DPL) ); - - // If it didn't work, the features are not enabled - if ( ! read_register(FEATURE) ) - { - // So enable them and try again - toggle_features(); - write_register(FEATURE,read_register(FEATURE) | _BV(EN_DPL) ); - } - -#ifdef SERIAL_DEBUG - uart_puts_p(PSTR("RF24 FEATURE=")); - uart_putdec(read_register(FEATURE)); - uart_putc('\n'); -#endif//SERIAL_DEBUG - - // Enable dynamic payload on all pipes - // - // Not sure the use case of only having dynamic payload on certain - // pipes, so the library does not support it. - write_register(DYNPD,read_register(DYNPD) | _BV(DPL_P5) | _BV(DPL_P4) | _BV(DPL_P3) | _BV(DPL_P2) | _BV(DPL_P1) | _BV(DPL_P0)); - - dynamic_payloads_enabled = true; -} - - - -void nrf24_enableAckPayload(void) -{ - // - // enable ack payload and dynamic payload features - // - - write_register(FEATURE,read_register(FEATURE) | _BV(EN_ACK_PAY) | _BV(EN_DPL) ); - - // If it didn't work, the features are not enabled - if ( ! read_register(FEATURE) ) - { - // So enable them and try again - toggle_features(); - write_register(FEATURE,read_register(FEATURE) | _BV(EN_ACK_PAY) | _BV(EN_DPL) ); - } - -#ifdef SERIAL_DEBUG - uart_puts_p(PSTR("RF24 FEATURE=")); - uart_putdec(read_register(FEATURE)); - uart_putc('\n'); -#endif - - // - // Enable dynamic payload on pipes 0 & 1 - // - - write_register(DYNPD,read_register(DYNPD) | _BV(DPL_P1) | _BV(DPL_P0)); -} - - - -void nrf24_writeAckPayload(uint8_t pipe, const void* buf, uint8_t len) -{ - const uint8_t* current = (const uint8_t*)(buf); - - csn(LOW); - spi_transfer( W_ACK_PAYLOAD | ( pipe & B111 ) ); - const uint8_t max_payload_size = 32; - uint8_t data_len = min(len,max_payload_size); - while ( data_len-- ) - spi_transfer(*current++); - - csn(HIGH); -} - - - -bool nrf24_isAckPayloadAvailable(void) -{ - bool result = ack_payload_available; - ack_payload_available = false; - return result; -} - - - -bool nrf24_isPVariant(void) -{ - return p_variant ; -} - - - -void nrf24_setAutoAck(bool enable) -{ - if ( enable ) - write_register(EN_AA, 0x3F); - else - write_register(EN_AA, 0); -} - - - -void nrf24_setAutoAck( uint8_t pipe, bool enable ) -{ - if ( pipe <= 6 ) - { - uint8_t en_aa = read_register( EN_AA ) ; - if( enable ) - { - en_aa |= _BV(pipe) ; - } - else - { - en_aa &= ~_BV(pipe) ; - } - write_register( EN_AA, en_aa ) ; - } -} - - - -bool nrf24_testCarrier(void) -{ - return ( read_register(CD) & 1 ); -} - - - -bool nrf24_testRPD(void) -{ - return ( read_register(RPD) & 1 ) ; -} - - - -void nrf24_setPALevel(rf24_pa_dbm_e level) -{ - uint8_t setup = read_register(RF_SETUP) ; - setup &= ~(_BV(RF_PWR_LOW) | _BV(RF_PWR_HIGH)) ; - - // switch uses RAM (evil!) - if ( level == RF24_PA_MAX ) - { - setup |= (_BV(RF_PWR_LOW) | _BV(RF_PWR_HIGH)) ; - } - else if ( level == RF24_PA_HIGH ) - { - setup |= _BV(RF_PWR_HIGH) ; - } - else if ( level == RF24_PA_LOW ) - { - setup |= _BV(RF_PWR_LOW); - } - else if ( level == RF24_PA_MIN ) - { - // nothing - } - else if ( level == RF24_PA_ERROR ) - { - // On error, go to maximum PA - setup |= (_BV(RF_PWR_LOW) | _BV(RF_PWR_HIGH)) ; - } - - write_register( RF_SETUP, setup ) ; -} - - - -rf24_pa_dbm_e nrf24_getPALevel(void) -{ - rf24_pa_dbm_e result = RF24_PA_ERROR ; - uint8_t power = read_register(RF_SETUP) & (_BV(RF_PWR_LOW) | _BV(RF_PWR_HIGH)) ; - - // switch uses RAM (evil!) - if ( power == (_BV(RF_PWR_LOW) | _BV(RF_PWR_HIGH)) ) - { - result = RF24_PA_MAX ; - } - else if ( power == _BV(RF_PWR_HIGH) ) - { - result = RF24_PA_HIGH ; - } - else if ( power == _BV(RF_PWR_LOW) ) - { - result = RF24_PA_LOW ; - } - else - { - result = RF24_PA_MIN ; - } - - return result ; -} - - - -bool nrf24_setDataRate(rf24_datarate_e speed) -{ - bool result = false; - uint8_t setup = read_register(RF_SETUP) ; - - // HIGH and LOW '00' is 1Mbs - our default - wide_band = false ; - setup &= ~(_BV(RF_DR_LOW) | _BV(RF_DR_HIGH)) ; - if( speed == RF24_250KBPS ) - { - // Must set the RF_DR_LOW to 1; RF_DR_HIGH (used to be RF_DR) is already 0 - // Making it '10'. - wide_band = false ; - setup |= _BV( RF_DR_LOW ) ; - } - else - { - // Set 2Mbs, RF_DR (RF_DR_HIGH) is set 1 - // Making it '01' - if ( speed == RF24_2MBPS ) - { - wide_band = true ; - setup |= _BV(RF_DR_HIGH); - } - else - { - // 1Mbs - wide_band = false ; - } - } - write_register(RF_SETUP,setup); - - // Verify our result - if ( read_register(RF_SETUP) == setup ) - { - result = true; - } - else - { - wide_band = false; - } - - return result; -} - - - -rf24_datarate_e nrf24_getDataRate( void ) -{ - rf24_datarate_e result ; - uint8_t dr = read_register(RF_SETUP) & (_BV(RF_DR_LOW) | _BV(RF_DR_HIGH)); - - // switch uses RAM (evil!) - // Order matters in our case below - if ( dr == _BV(RF_DR_LOW) ) - { - // '10' = 250KBPS - result = RF24_250KBPS ; - } - else if ( dr == _BV(RF_DR_HIGH) ) - { - // '01' = 2MBPS - result = RF24_2MBPS ; - } - else - { - // '00' = 1MBPS - result = RF24_1MBPS ; - } - return result ; -} - - - -void nrf24_setCRCLength(rf24_crclength_e length) -{ - uint8_t config = read_register(CONFIG) & ~( _BV(CRCO) | _BV(EN_CRC)) ; - - // switch uses RAM (evil!) - if ( length == RF24_CRC_DISABLED ) - { - // Do nothing, we turned it off above. - } - else if ( length == RF24_CRC_8 ) - { - config |= _BV(EN_CRC); - } - else - { - config |= _BV(EN_CRC); - config |= _BV( CRCO ); - } - write_register( CONFIG, config ) ; -} - - - -rf24_crclength_e nrf24_getCRCLength(void) -{ - rf24_crclength_e result = RF24_CRC_DISABLED; - uint8_t config = read_register(CONFIG) & ( _BV(CRCO) | _BV(EN_CRC)) ; - - if ( config & _BV(EN_CRC ) ) - { - if ( config & _BV(CRCO) ) - result = RF24_CRC_16; - else - result = RF24_CRC_8; - } - - return result; -} - - - -void nrf24_disableCRC( void ) -{ - uint8_t disable = read_register(CONFIG) & ~_BV(EN_CRC) ; - write_register( CONFIG, disable ) ; -} - - -void nrf24_setRetries(uint8_t delay, uint8_t count) -{ - write_register(SETUP_RETR,(delay&0xf)<, jaseg - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - version 2 as published by the Free Software Foundation. - */ - -/** - * @file RF24.h - * - * Class declaration for RF24 and helper enums - */ - -#ifndef __RF24_H__ -#define __RF24_H__ - -//#include - -#define HIGH 1 -#define LOW 0 - -#define TRUE 1 -#define FALSE 0 - -/** - * Power Amplifier level. - * - * For use with setPALevel() - */ -typedef enum { RF24_PA_MIN = 0,RF24_PA_LOW, RF24_PA_HIGH, RF24_PA_MAX, RF24_PA_ERROR } rf24_pa_dbm_e ; - -/** - * Data rate. How fast data moves through the air. - * - * For use with setDataRate() - */ -typedef enum { RF24_1MBPS = 0, RF24_2MBPS, RF24_250KBPS } rf24_datarate_e; - -/** - * CRC Length. How big (if any) of a CRC is included. - * - * For use with setCRCLength() - */ -typedef enum { RF24_CRC_DISABLED = 0, RF24_CRC_8, RF24_CRC_16 } rf24_crclength_e; - -/** - * Driver for nRF24L01(+) 2.4GHz Wireless Transceiver - */ - -/** - * @name Low-level internal interface. - * - * Protected methods that address the chip directly. Regular users cannot - * ever call these. They are documented for completeness and for developers who - * may want to extend this class. - */ -/**@{*/ - -/** - * Set chip select pin - * - * Running SPI bus at PI_CLOCK_DIV2 so we don't waste time transferring data - * and best of all, we make use of the radio's FIFO buffers. A lower speed - * means we're less likely to effectively leverage our FIFOs and pay a higher - * AVR runtime cost as toll. - * - * @param mode HIGH to take this unit off the SPI bus, LOW to put it on - */ -void nrf24_csn(int mode); - -/** - * Set chip enable - * - * @param level HIGH to actively begin transmission or LOW to put in standby. Please see data sheet - * for a much more detailed description of this pin. - */ -void nrf24_ce(int level); - -/** - * Read a chunk of data in from a register - * - * @param reg Which register. Use constants from nRF24L01.h - * @param buf Where to put the data - * @param len How many bytes of data to transfer - * @return Current value of status register - */ -uint8_t nrf24_read_register_buf(uint8_t reg, uint8_t* buf, uint8_t len); - -/** - * Read single byte from a register - * - * @param reg Which register. Use constants from nRF24L01.h - * @return Current value of register @p reg - */ -uint8_t nrf24_read_register(uint8_t reg); - -/** - * Write a chunk of data to a register - * - * @param reg Which register. Use constants from nRF24L01.h - * @param buf Where to get the data - * @param len How many bytes of data to transfer - * @return Current value of status register - */ -uint8_t nrf24_write_register_buf(uint8_t reg, const uint8_t* buf, uint8_t len); - -/** - * Write a single byte to a register - * - * @param reg Which register. Use constants from nRF24L01.h - * @param value The new value to write - * @return Current value of status register - */ -uint8_t nrf24_write_register(uint8_t reg, uint8_t value); - -/** - * Write the transmit payload - * - * The size of data written is the fixed payload size, see getPayloadSize() - * - * @param buf Where to get the data - * @param len Number of bytes to be sent - * @return Current value of status register - */ -uint8_t nrf24_write_payload(const void* buf, uint8_t len); - -/** - * Read the receive payload - * - * The size of data read is the fixed payload size, see getPayloadSize() - * - * @param buf Where to put the data - * @param len Maximum number of bytes to read - * @return Current value of status register - */ -uint8_t nrf24_read_payload(void* buf, uint8_t len); - -/** - * Empty the receive buffer - * - * @return Current value of status register - */ -uint8_t nrf24_flush_rx(void); - -/** - * Empty the transmit buffer - * - * @return Current value of status register - */ -uint8_t nrf24_flush_tx(void); - -/** - * Retrieve the current status of the chip - * - * @return Current value of status register - */ -uint8_t nrf24_get_status(void); - -/** - * Decode and print the given status to stdout - * - * @param status Status value to print - * - * @warning Does nothing if stdout is not defined. See fdevopen in stdio.h - */ -void nrf24_print_status(uint8_t status); - -/** - * Decode and print the given 'observe_tx' value to stdout - * - * @param value The observe_tx value to print - * - * @warning Does nothing if stdout is not defined. See fdevopen in stdio.h - */ -void nrf24_print_observe_tx(uint8_t value); - -/** - * Print the name and value of an 8-bit register to stdout - * - * Optionally it can print some quantity of successive - * registers on the same line. This is useful for printing a group - * of related registers on one line. - * - * @param name Name of the register - * @param reg Which register. Use constants from nRF24L01.h - * @param qty How many successive registers to print - */ -void nrf24_print_byte_register(const char* name, uint8_t reg, uint8_t qty); - -/** - * Print the name and value of a 40-bit address register to stdout - * - * Optionally it can print some quantity of successive - * registers on the same line. This is useful for printing a group - * of related registers on one line. - * - * @param name Name of the register - * @param reg Which register. Use constants from nRF24L01.h - * @param qty How many successive registers to print - */ -void nrf24_print_address_register(const char* name, uint8_t reg, uint8_t qty); - -/** - * Turn on or off the special features of the chip - * - * The chip has certain 'features' which are only available when the 'features' - * are enabled. See the datasheet for details. - */ -void nrf24_toggle_features(void); -/**@}*/ - -/** - * @name Primary public interface - * - * These are the main methods you need to operate the chip - */ -/**@{*/ - -/** - * Begin operation of the chip - * - * Call this in setup(), before calling any other methods. - */ -void nrf24_begin(void); - -/** - * Start listening on the pipes opened for reading. - * - * Be sure to call openReadingPipe() first. Do not call write() while - * in this mode, without first calling stopListening(). Call - * isAvailable() to check for incoming traffic, and read() to get it. - */ -void nrf24_startListening(void); - -/** - * Stop listening for incoming messages - * - * Do this before calling write(). - */ -void nrf24_stopListening(void); - -/** - * Write to the open writing pipe - * - * Be sure to call openWritingPipe() first to set the destination - * of where to write to. - * - * This blocks until the message is successfully acknowledged by - * the receiver or the timeout/retransmit maxima are reached. In - * the current configuration, the max delay here is 60ms. - * - * The maximum size of data written is the fixed payload size, see - * getPayloadSize(). However, you can write less, and the remainder - * will just be filled with zeroes. - * - * @param buf Pointer to the data to be sent - * @param len Number of bytes to be sent - * @return True if the payload was delivered successfully FALSE if not - */ -uint8_t nrf24_write( const void* buf, uint8_t len ); - -/** - * Test whether there are bytes available to be read - * - * @return True if there is a payload available, FALSE if none is - */ -uint8_t nrf24_available(void); - -/** - * Read the payload - * - * Return the last payload received - * - * The size of data read is the fixed payload size, see getPayloadSize() - * - * @note I specifically chose 'void*' as a data type to make it easier - * for beginners to use. No casting needed. - * - * @param buf Pointer to a buffer where the data should be written - * @param len Maximum number of bytes to read into the buffer - * @return True if the payload was delivered successfully FALSE if not - */ -uint8_t nrf24_read( void* buf, uint8_t len ); - -/** - * Open a pipe for writing - * - * Only one pipe can be open at once, but you can change the pipe - * you'll listen to. Do not call this while actively listening. - * Remember to stopListening() first. - * - * Addresses are 40-bit hex values, e.g.: - * - * @code - * openWritingPipe(0xF0F0F0F0F0); - * @endcode - * - * @param address The 40-bit address of the pipe to open. This can be - * any value whatsoever, as long as you are the only one writing to it - * and only one other radio is listening to it. Coordinate these pipe - * addresses amongst nodes on the network. - */ -void nrf24_openWritingPipe(uint64_t address); - -/** - * Open a pipe for reading - * - * Up to 6 pipes can be open for reading at once. Open all the - * reading pipes, and then call startListening(). - * - * @see openWritingPipe - * - * @warning Pipes 1-5 should share the first 32 bits. - * Only the least significant byte should be unique, e.g. - * @code - * openReadingPipe(1,0xF0F0F0F0AA); - * openReadingPipe(2,0xF0F0F0F066); - * @endcode - * - * @warning Pipe 0 is also used by the writing pipe. So if you open - * pipe 0 for reading, and then startListening(), it will overwrite the - * writing pipe. Ergo, do an openWritingPipe() again before write(). - * - * @todo Enforce the restriction that pipes 1-5 must share the top 32 bits - * - * @param number Which pipe# to open, 0-5. - * @param address The 40-bit address of the pipe to open. - */ -void nrf24_openReadingPipe(uint8_t number, uint64_t address); - -/**@}*/ -/** - * @name Optional Configurators - * - * Methods you can use to get or set the configuration of the chip. - * None are required. Calling begin() sets up a reasonable set of - * defaults. - */ -/**@{*/ -/** - * Set the number and delay of retries upon failed submit - * - * @param delay How long to wait between each retry, in multiples of 250us, - * max is 15. 0 means 250us, 15 means 4000us. - * @param count How many retries before giving up, max 15 - */ -void nrf24_setRetries(uint8_t delay, uint8_t count); - -/** - * Set RF communication channel - * - * @param channel Which RF channel to communicate on, 0-127 - */ -void nrf24_setChannel(uint8_t channel); - -/** - * Set Static Payload Size - * - * This implementation uses a pre-stablished fixed payload size for all - * transmissions. If this method is never called, the driver will always - * transmit the maximum payload size (32 bytes), no matter how much - * was sent to write(). - * - * @todo Implement variable-sized payloads feature - * - * @param size The number of bytes in the payload - */ -void nrf24_setPayloadSize(uint8_t size); - -/** - * Get Static Payload Size - * - * @see setPayloadSize() - * - * @return The number of bytes in the payload - */ -uint8_t nrf24_getPayloadSize(void); - -/** - * Get Dynamic Payload Size - * - * For dynamic payloads, this pulls the size of the payload off - * the chip - * - * @return Payload length of last-received dynamic payload - */ -uint8_t nrf24_getDynamicPayloadSize(void); - -/** - * Enable custom payloads on the acknowledge packets - * - * Ack payloads are a handy way to return data back to senders without - * manually changing the radio modes on both units. - * - * @see examples/pingpair_pl/pingpair_pl.pde - */ -void nrf24_enableAckPayload(void); - -/** - * Enable dynamically-sized payloads - * - * This way you don't always have to send large packets just to send them - * once in a while. This enables dynamic payloads on ALL pipes. - * - * @see examples/pingpair_pl/pingpair_dyn.pde - */ -void nrf24_enableDynamicPayloads(void); - -/** - * Determine whether the hardware is an nRF24L01+ or not. - * - * @return TRUE if the hardware is nRF24L01+ (or compatible) and FALSE - * if its not. - */ -uint8_t nrf24_isPVariant(void) ; - -/** - * Enable or disable auto-acknowlede packets - * - * This is enabled by default, so it's only needed if you want to turn - * it off for some reason. - * - * @param enable Whether to enable (TRUE) or disable (FALSE) auto-acks - */ -void nrf24_setAutoAck(uint8_t enable); - -/** - * Enable or disable auto-acknowlede packets on a per pipeline basis. - * - * AA is enabled by default, so it's only needed if you want to turn - * it off/on for some reason on a per pipeline basis. - * - * @param pipe Which pipeline to modify - * @param enable Whether to enable (TRUE) or disable (FALSE) auto-acks - */ -void nrf24_setAutoAck_pipe( uint8_t pipe, uint8_t enable ) ; - -/** - * Set Power Amplifier (PA) level to one of four levels. - * Relative mnemonics have been used to allow for future PA level - * changes. According to 6.5 of the nRF24L01+ specification sheet, - * they translate to: RF24_PA_MIN=-18dBm, RF24_PA_LOW=-12dBm, - * RF24_PA_MED=-6dBM, and RF24_PA_HIGH=0dBm. - * - * @param level Desired PA level. - */ -void nrf24_setPALevel( rf24_pa_dbm_e level ) ; - -/** - * Fetches the current PA level. - * - * @return Returns a value from the rf24_pa_dbm_e enum describing - * the current PA setting. Please remember, all values represented - * by the enum mnemonics are negative dBm. See setPALevel for - * return value descriptions. - */ -rf24_pa_dbm_e nrf24_getPALevel( void ) ; - -/** - * Set the transmission data rate - * - * @warning setting RF24_250KBPS will fail for non-plus units - * - * @param speed RF24_250KBPS for 250kbs, RF24_1MBPS for 1Mbps, or RF24_2MBPS for 2Mbps - * @return TRUE if the change was successful - */ -uint8_t nrf24_setDataRate(rf24_datarate_e speed); - -/** - * Fetches the transmission data rate - * - * @return Returns the hardware's currently configured datarate. The value - * is one of 250kbs, RF24_1MBPS for 1Mbps, or RF24_2MBPS, as defined in the - * rf24_datarate_e enum. - */ -rf24_datarate_e nrf24_getDataRate( void ) ; - -/** - * Set the CRC length - * - * @param length RF24_CRC_8 for 8-bit or RF24_CRC_16 for 16-bit - */ -void nrf24_setCRCLength(rf24_crclength_e length); - -/** - * Get the CRC length - * - * @return RF24_DISABLED if disabled or RF24_CRC_8 for 8-bit or RF24_CRC_16 for 16-bit - */ -rf24_crclength_e nrf24_getCRCLength(void); - -/** - * Disable CRC validation - * - */ -void nrf24_disableCRC( void ) ; - -/**@}*/ -/** - * @name Advanced Operation - * - * Methods you can use to drive the chip in more advanced ways - */ -/**@{*/ - -/** - * Print a giant block of debugging information to stdout - * - * @warning Does nothing if stdout is not defined. See fdevopen in stdio.h - */ -void nrf24_printDetails(void); - -/** - * Enter low-power mode - * - * To return to normal power mode, either write() some data or - * startListening, or powerUp(). - */ -void nrf24_powerDown(void); - -/** - * Leave low-power mode - making radio more responsive - * - * To return to low power mode, call powerDown(). - */ -void nrf24_powerUp(void) ; - -/** - * Test whether there are bytes available to be read - * - * Use this version to discover on which pipe the message - * arrived. - * - * @param[out] pipe_num Which pipe has the payload available - * @return True if there is a payload available, FALSE if none is - */ -uint8_t nrf24_available_pipe(uint8_t* pipe_num); - -/** - * Non-blocking write to the open writing pipe - * - * Just like write(), but it returns immediately. To find out what happened - * to the send, catch the IRQ and then call whatHappened(). - * - * @see write() - * @see whatHappened() - * - * @param buf Pointer to the data to be sent - * @param len Number of bytes to be sent - * @return True if the payload was delivered successfully FALSE if not - */ -void nrf24_startWrite( const void* buf, uint8_t len ); - -/** - * Write an ack payload for the specified pipe - * - * The next time a message is received on @p pipe, the data in @p buf will - * be sent back in the acknowledgement. - * - * @warning According to the data sheet, only three of these can be pending - * at any time. I have not tested this. - * - * @param pipe Which pipe# (typically 1-5) will get this response. - * @param buf Pointer to data that is sent - * @param len Length of the data to send, up to 32 bytes max. Not affected - * by the static payload set by setPayloadSize(). - */ -void nrf24_writeAckPayload(uint8_t pipe, const void* buf, uint8_t len); - -/** - * Determine if an ack payload was received in the most recent call to - * write(). - * - * Call read() to retrieve the ack payload. - * - * @warning Calling this function clears the internal flag which indicates - * a payload is available. If it returns TRUE, you must read the packet - * out as the very next interaction with the radio, or the results are - * undefined. - * - * @return True if an ack payload is available. - */ -uint8_t nrf24_isAckPayloadAvailable(void); - -/** - * Call this when you get an interrupt to find out why - * - * Tells you what caused the interrupt, and clears the state of - * interrupts. - * - * @param[out] tx_ok The send was successful (TX_DS) - * @param[out] tx_fail The send failed, too many retries (MAX_RT) - * @param[out] rx_ready There is a message waiting to be read (RX_DS) - */ -void nrf24_whatHappened(uint8_t *tx_ok,uint8_t *tx_fail,uint8_t *rx_ready); - -/** - * Test whether there was a carrier on the line for the - * previous listening period. - * - * Useful to check for interference on the current channel. - * - * @return TRUE if was carrier, FALSE if not - */ -uint8_t nrf24_testCarrier(void); - -/** - * Test whether a signal (carrier or otherwise) greater than - * or equal to -64dBm is present on the channel. Valid only - * on nRF24L01P (+) hardware. On nRF24L01, use testCarrier(). - * - * Useful to check for interference on the current channel and - * channel hopping strategies. - * - * @return TRUE if signal => -64dBm, FALSE if not - */ -uint8_t nrf24_testRPD(void) ; - -/**@}*/ - -/** - * @example GettingStarted.pde - * - * This is an example which corresponds to my "Getting Started" blog post: - * Getting Started with nRF24L01+ on Arduino. - * - * It is an example of how to use the RF24 class. Write this sketch to two - * different nodes. Put one of the nodes into 'transmit' mode by connecting - * with the serial monitor and sending a 'T'. The ping node sends the current - * time to the pong node, which responds by sending the value back. The ping - * node can then see how long the whole cycle took. - */ - -/** - * @example nordic_fob.pde - * - * This is an example of how to use the RF24 class to receive signals from the - * Sparkfun Nordic FOB. See http://www.sparkfun.com/products/8602 . - * Thanks to Kirk Mower for providing test hardware. - */ - -/** - * @example led_remote.pde - * - * This is an example of how to use the RF24 class to control a remote - * bank of LED's using buttons on a remote control. - * - * Every time the buttons change on the remote, the entire state of - * buttons is send to the led board, which displays the state. - */ - -/** - * @example pingpair.pde - * - * This is an example of how to use the RF24 class. Write this sketch to two - * different nodes, connect the role_pin to ground on one. The ping node sends - * the current time to the pong node, which responds by sending the value back. - * The ping node can then see how long the whole cycle took. - */ - -/** - * @example pingpair_maple.pde - * - * This is an example of how to use the RF24 class on the Maple. For a more - * detailed explanation, see my blog post: - * nRF24L01+ Running on Maple - * - * It will communicate well to an Arduino-based unit as well, so it's not for only Maple-to-Maple communication. - * - * Write this sketch to two different nodes, - * connect the role_pin to ground on one. The ping node sends the current time to the pong node, - * which responds by sending the value back. The ping node can then see how long the whole cycle - * took. - */ - -/** - * @example starping.pde - * - * This sketch is a more complex example of using the RF24 library for Arduino. - * Deploy this on up to six nodes. Set one as the 'pong receiver' by tying the - * role_pin low, and the others will be 'ping transmit' units. The ping units - * unit will send out the value of millis() once a second. The pong unit will - * respond back with a copy of the value. Each ping unit can get that response - * back, and determine how long the whole cycle took. - * - * This example requires a bit more complexity to determine which unit is which. - * The pong receiver is identified by having its role_pin tied to ground. - * The ping senders are further differentiated by a byte in eeprom. - */ - -/** - * @example pingpair_pl.pde - * - * This is an example of how to do two-way communication without changing - * transmit/receive modes. Here, a payload is set to the transmitter within - * the Ack packet of each transmission. Note that the payload is set BEFORE - * the sender's message arrives. - */ - -/** - * @example pingpair_irq.pde - * - * This is an example of how to user interrupts to interact with the radio. - * It builds on the pingpair_pl example, and uses ack payloads. - */ - -/** - * @example pingpair_sleepy.pde - * - * This is an example of how to use the RF24 class to create a battery- - * efficient system. It is just like the pingpair.pde example, but the - * ping node powers down the radio and sleeps the MCU after every - * ping/pong cycle. - */ - -/** - * @example scanner.pde - * - * Example to detect interference on the various channels available. - * This is a good diagnostic tool to check whether you're picking a - * good channel for your application. - * - * Inspired by cpixip. - * See http://arduino.cc/forum/index.php/topic,54795.0.html - */ - -/** - * @mainpage Driver for nRF24L01(+) 2.4GHz Wireless Transceiver - * - * @section Goals Design Goals - * - * This library is designed to be... - * @li Maximally compliant with the intended operation of the chip - * @li Easy for beginners to use - * @li Consumed with a public interface that's similiar to other Arduino standard libraries - * - * @section News News - * - * NOW COMPATIBLE WITH ARDUINO 1.0 - The 'master' branch and all examples work with both Arduino 1.0 and earlier versions. - * Please open an issue if you find any problems using it with any version of Arduino. - * - * NOW COMPATIBLE WITH MAPLE - RF24 has been tested with the - * Maple Native, - * and should work with any Maple board. See the pingpair_maple example. - * Note that only the pingpair_maple example has been tested on Maple, although - * the others can certainly be adapted. - * - * @section Useful Useful References - * - * Please refer to: - * - * @li Documentation Main Page - * @li RF24 Class Documentation - * @li Source Code - * @li Downloads Page - * @li Chip Datasheet - * - * This chip uses the SPI bus, plus two chip control pins. Remember that pin 10 must still remain an output, or - * the SPI hardware will go into 'slave' mode. - * - * @section More More Information - * - * @subpage FAQ - * - * @section Projects Projects - * - * Stuff I have built with RF24 - * - * RF24 Getting Started - Finished Product - * - * Getting Started with nRF24L01+ on Arduino - * - * Nordic FOB and nRF24L01+ - * - * Using the Sparkfun Nordic FOB - * - * RF Duinode V3 (2V4) - * - * Low-Power Wireless Sensor Node - * - * nRF24L01+ connected to Leaf Labs Maple Native - * - * nRF24L01+ Running on Maple - */ - - -#include "RF24.c" - -#endif // __RF24_H__ -// vim:ai:cin:sts=2 sw=2 ft=cpp - diff --git a/AVR/lib/RF24/RF24_config.h b/AVR/lib/RF24/RF24_config.h deleted file mode 100644 index 6b49201..0000000 --- a/AVR/lib/RF24/RF24_config.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - Copyright (C) 2011,2012 J. Coliz , jaseg - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - version 3 as published by the Free Software Foundation. - */ - -/*#ifndef __RF24_CONFIG_H__ -#define __RF24_CONFIG_H__ - -#define CE_PORT PORTB -#define CE_DDR DDRB -#define CE_PIN 0 - -#define CSN_PORT PORTL -#define CSN_DDR DDRL -#define CSN_PIN 0 - -#define MAX_PAYLOAD_SIZE 32 - -//typedef char const char; - -#endif // __RF24_CONFIG_H__ -*/ \ No newline at end of file diff --git a/AVR/lib/RF24/doxygen-custom.css b/AVR/lib/RF24/doxygen-custom.css deleted file mode 100644 index d7d0e12..0000000 --- a/AVR/lib/RF24/doxygen-custom.css +++ /dev/null @@ -1,835 +0,0 @@ -/* The standard CSS for doxygen */ - -body, table, div, p, dl { - font-family: Lucida Grande, Verdana, Geneva, Arial, sans-serif; - font-size: 12px; -} - -/* @group Heading Levels */ - -h1 { - font-size: 150%; -} - -.title { - font-size: 150%; - font-weight: bold; - margin: 10px 2px; -} - -h2 { - font-size: 120%; -} - -h3 { - font-size: 100%; -} - -dt { - font-weight: bold; -} - -div.multicol { - -moz-column-gap: 1em; - -webkit-column-gap: 1em; - -moz-column-count: 3; - -webkit-column-count: 3; -} - -p.startli, p.startdd, p.starttd { - margin-top: 2px; -} - -p.endli { - margin-bottom: 0px; -} - -p.enddd { - margin-bottom: 4px; -} - -p.endtd { - margin-bottom: 2px; -} - -/* @end */ - -caption { - font-weight: bold; -} - -span.legend { - font-size: 70%; - text-align: center; -} - -h3.version { - font-size: 90%; - text-align: center; -} - -div.qindex, div.navtab{ - background-color: #EBEFF6; - border: 1px solid #A3B4D7; - text-align: center; - margin: 2px; - padding: 2px; -} - -div.qindex, div.navpath { - width: 100%; - line-height: 140%; -} - -div.navtab { - margin-right: 15px; -} - -/* @group Link Styling */ - -a { - color: #3D578C; - font-weight: normal; - text-decoration: none; -} - -.contents a:visited { - color: #4665A2; -} - -a:hover { - text-decoration: underline; -} - -a.qindex { - font-weight: bold; -} - -a.qindexHL { - font-weight: bold; - background-color: #9CAFD4; - color: #ffffff; - border: 1px double #869DCA; -} - -.contents a.qindexHL:visited { - color: #ffffff; -} - -a.el { - font-weight: bold; -} - -a.elRef { -} - -a.code { - color: #4665A2; -} - -a.codeRef { - color: #4665A2; -} - -/* @end */ - -dl.el { - margin-left: -1cm; -} - -.fragment { - font-family: monospace, fixed; - font-size: 105%; -} - -pre.fragment { - border: 1px solid #C4CFE5; - background-color: #FBFCFD; - padding: 4px 6px; - margin: 4px 8px 4px 2px; - overflow: auto; - word-wrap: break-word; - font-size: 9pt; - line-height: 125%; -} - -div.ah { - background-color: black; - font-weight: bold; - color: #ffffff; - margin-bottom: 3px; - margin-top: 3px; - padding: 0.2em; - border: solid thin #333; - border-radius: 0.5em; - -webkit-border-radius: .5em; - -moz-border-radius: .5em; - box-shadow: 2px 2px 3px #999; - -webkit-box-shadow: 2px 2px 3px #999; - -moz-box-shadow: rgba(0, 0, 0, 0.15) 2px 2px 2px; - background-image: -webkit-gradient(linear, left top, left bottom, from(#eee), to(#000),color-stop(0.3, #444)); - background-image: -moz-linear-gradient(center top, #eee 0%, #444 40%, #000); -} - -div.groupHeader { - margin-left: 16px; - margin-top: 12px; - font-weight: bold; -} - -div.groupText { - margin-left: 16px; - font-style: italic; -} - -body { - background: white; - color: black; - margin: 0; -} - -div.contents { - margin-top: 10px; - margin-left: 10px; - margin-right: 5px; -} - -td.indexkey { - background-color: #EBEFF6; - font-weight: bold; - border: 1px solid #C4CFE5; - margin: 2px 0px 2px 0; - padding: 2px 10px; -} - -td.indexvalue { - background-color: #EBEFF6; - border: 1px solid #C4CFE5; - padding: 2px 10px; - margin: 2px 0px; -} - -tr.memlist { - background-color: #EEF1F7; -} - -p.formulaDsp { - text-align: center; -} - -img.formulaDsp { - -} - -img.formulaInl { - vertical-align: middle; -} - -div.center { - text-align: center; - margin-top: 0px; - margin-bottom: 0px; - padding: 0px; -} - -div.center img { - border: 0px; -} - -address.footer { - text-align: right; - padding-right: 12px; -} - -img.footer { - border: 0px; - vertical-align: middle; -} - -/* @group Code Colorization */ - -span.keyword { - color: #008000 -} - -span.keywordtype { - color: #604020 -} - -span.keywordflow { - color: #e08000 -} - -span.comment { - color: #800000 -} - -span.preprocessor { - color: #806020 -} - -span.stringliteral { - color: #002080 -} - -span.charliteral { - color: #008080 -} - -span.vhdldigit { - color: #ff00ff -} - -span.vhdlchar { - color: #000000 -} - -span.vhdlkeyword { - color: #700070 -} - -span.vhdllogic { - color: #ff0000 -} - -/* @end */ - -/* -.search { - color: #003399; - font-weight: bold; -} - -form.search { - margin-bottom: 0px; - margin-top: 0px; -} - -input.search { - font-size: 75%; - color: #000080; - font-weight: normal; - background-color: #e8eef2; -} -*/ - -td.tiny { - font-size: 75%; -} - -.dirtab { - padding: 4px; - border-collapse: collapse; - border: 1px solid #A3B4D7; -} - -th.dirtab { - background: #EBEFF6; - font-weight: bold; -} - -hr { - height: 0px; - border: none; - border-top: 1px solid #4A6AAA; -} - -hr.footer { - height: 1px; -} - -/* @group Member Descriptions */ - -table.memberdecls { - border-spacing: 0px; - padding: 0px; -} - -.mdescLeft, .mdescRight, -.memItemLeft, .memItemRight, -.memTemplItemLeft, .memTemplItemRight, .memTemplParams { - background-color: #F9FAFC; - border: none; - margin: 4px; - padding: 1px 0 0 8px; -} - -.mdescLeft, .mdescRight { - padding: 0px 8px 4px 8px; - color: #555; -} - -.memItemLeft, .memItemRight, .memTemplParams { - border-top: 1px solid #C4CFE5; -} - -.memItemLeft, .memTemplItemLeft { - white-space: nowrap; -} - -.memItemRight { - width: 100%; -} - -.memTemplParams { - color: #4665A2; - white-space: nowrap; -} - -/* @end */ - -/* @group Member Details */ - -/* Styles for detailed member documentation */ - -.memtemplate { - font-size: 80%; - color: #4665A2; - font-weight: normal; - margin-left: 9px; -} - -.memnav { - background-color: #EBEFF6; - border: 1px solid #A3B4D7; - text-align: center; - margin: 2px; - margin-right: 15px; - padding: 2px; -} - -.mempage { - width: 100%; -} - -.memitem { - padding: 0; - margin-bottom: 10px; - margin-right: 5px; -} - -.memname { - white-space: nowrap; - font-weight: bold; - margin-left: 6px; -} - -.memproto { - border-top: 1px solid #A8B8D9; - border-left: 1px solid #A8B8D9; - border-right: 1px solid #A8B8D9; - padding: 6px 0px 6px 0px; - color: #253555; - font-weight: bold; - text-shadow: 0px 1px 1px rgba(255, 255, 255, 0.9); - /* opera specific markup */ - box-shadow: 5px 5px 5px rgba(0, 0, 0, 0.15); - border-top-right-radius: 8px; - border-top-left-radius: 8px; - /* firefox specific markup */ - -moz-box-shadow: rgba(0, 0, 0, 0.15) 5px 5px 5px; - -moz-border-radius-topright: 8px; - -moz-border-radius-topleft: 8px; - /* webkit specific markup */ - -webkit-box-shadow: 5px 5px 5px rgba(0, 0, 0, 0.15); - -webkit-border-top-right-radius: 8px; - -webkit-border-top-left-radius: 8px; - background-image:url('nav_f.png'); - background-repeat:repeat-x; - background-color: #E2E8F2; - -} - -.memdoc { - border-bottom: 1px solid #A8B8D9; - border-left: 1px solid #A8B8D9; - border-right: 1px solid #A8B8D9; - padding: 2px 5px; - background-color: #FBFCFD; - border-top-width: 0; - /* opera specific markup */ - border-bottom-left-radius: 8px; - border-bottom-right-radius: 8px; - box-shadow: 5px 5px 5px rgba(0, 0, 0, 0.15); - /* firefox specific markup */ - -moz-border-radius-bottomleft: 8px; - -moz-border-radius-bottomright: 8px; - -moz-box-shadow: rgba(0, 0, 0, 0.15) 5px 5px 5px; - background-image: -moz-linear-gradient(center top, #FFFFFF 0%, #FFFFFF 60%, #F7F8FB 95%, #EEF1F7); - /* webkit specific markup */ - -webkit-border-bottom-left-radius: 8px; - -webkit-border-bottom-right-radius: 8px; - -webkit-box-shadow: 5px 5px 5px rgba(0, 0, 0, 0.15); - background-image: -webkit-gradient(linear,center top,center bottom,from(#FFFFFF), color-stop(0.6,#FFFFFF), color-stop(0.60,#FFFFFF), color-stop(0.95,#F7F8FB), to(#EEF1F7)); -} - -.paramkey { - text-align: right; -} - -.paramtype { - white-space: nowrap; -} - -.paramname { - color: #602020; - white-space: nowrap; -} -.paramname em { - font-style: normal; -} - -.params, .retval, .exception, .tparams { - border-spacing: 6px 2px; -} - -.params .paramname, .retval .paramname { - font-weight: bold; - vertical-align: top; -} - -.params .paramtype { - font-style: italic; - vertical-align: top; -} - -.params .paramdir { - font-family: "courier new",courier,monospace; - vertical-align: top; -} - - - - -/* @end */ - -/* @group Directory (tree) */ - -/* for the tree view */ - -.ftvtree { - font-family: sans-serif; - margin: 0px; -} - -/* these are for tree view when used as main index */ - -.directory { - font-size: 9pt; - font-weight: bold; - margin: 5px; -} - -.directory h3 { - margin: 0px; - margin-top: 1em; - font-size: 11pt; -} - -/* -The following two styles can be used to replace the root node title -with an image of your choice. Simply uncomment the next two styles, -specify the name of your image and be sure to set 'height' to the -proper pixel height of your image. -*/ - -/* -.directory h3.swap { - height: 61px; - background-repeat: no-repeat; - background-image: url("yourimage.gif"); -} -.directory h3.swap span { - display: none; -} -*/ - -.directory > h3 { - margin-top: 0; -} - -.directory p { - margin: 0px; - white-space: nowrap; -} - -.directory div { - display: none; - margin: 0px; -} - -.directory img { - vertical-align: -30%; -} - -/* these are for tree view when not used as main index */ - -.directory-alt { - font-size: 100%; - font-weight: bold; -} - -.directory-alt h3 { - margin: 0px; - margin-top: 1em; - font-size: 11pt; -} - -.directory-alt > h3 { - margin-top: 0; -} - -.directory-alt p { - margin: 0px; - white-space: nowrap; -} - -.directory-alt div { - display: none; - margin: 0px; -} - -.directory-alt img { - vertical-align: -30%; -} - -/* @end */ - -div.dynheader { - margin-top: 8px; -} - -address { - font-style: normal; - color: #2A3D61; -} - -table.doxtable { - border-collapse:collapse; -} - -table.doxtable td, table.doxtable th { - border: 1px solid #2D4068; - padding: 3px 7px 2px; -} - -table.doxtable th { - background-color: #374F7F; - color: #FFFFFF; - font-size: 110%; - padding-bottom: 4px; - padding-top: 5px; - text-align:left; -} - -.tabsearch { - top: 0px; - left: 10px; - height: 36px; - background-image: url('tab_b.png'); - z-index: 101; - overflow: hidden; - font-size: 13px; -} - -.navpath ul -{ - font-size: 11px; - background-image:url('tab_b.png'); - background-repeat:repeat-x; - height:30px; - line-height:30px; - color:#8AA0CC; - border:solid 1px #C2CDE4; - overflow:hidden; - margin:0px; - padding:0px; -} - -.navpath li -{ - list-style-type:none; - float:left; - padding-left:10px; - padding-right:15px; - background-image:url('bc_s.png'); - background-repeat:no-repeat; - background-position:right; - color:#364D7C; -} - -.navpath li.navelem a -{ - height:32px; - display:block; - text-decoration: none; - outline: none; -} - -.navpath li.navelem a:hover -{ - color:#6884BD; -} - -.navpath li.footer -{ - list-style-type:none; - float:right; - padding-left:10px; - padding-right:15px; - background-image:none; - background-repeat:no-repeat; - background-position:right; - color:#364D7C; - font-size: 8pt; -} - - -div.summary -{ - float: right; - font-size: 8pt; - padding-right: 5px; - width: 50%; - text-align: right; -} - -div.summary a -{ - white-space: nowrap; -} - -div.ingroups -{ - font-size: 8pt; - padding-left: 5px; - width: 50%; - text-align: left; -} - -div.ingroups a -{ - white-space: nowrap; -} - -div.header -{ - background-image:url('nav_h.png'); - background-repeat:repeat-x; - background-color: #F9FAFC; - margin: 0px; - border-bottom: 1px solid #C4CFE5; -} - -div.headertitle -{ - padding: 5px 5px 5px 10px; -} - -dl -{ - padding: 0 0 0 10px; -} - -dl.note, dl.warning, dl.attention, dl.pre, dl.post, dl.invariant, dl.deprecated, dl.todo, dl.test, dl.bug -{ - border-left:4px solid; - padding: 0 0 0 6px; -} - -dl.note -{ - border-color: #D0C000; -} - -dl.warning, dl.attention -{ - border-color: #FF0000; -} - -dl.pre, dl.post, dl.invariant -{ - border-color: #00D000; -} - -dl.deprecated -{ - border-color: #505050; -} - -dl.todo -{ - border-color: #00C0E0; -} - -dl.test -{ - border-color: #3030E0; -} - -dl.bug -{ - border-color: #C08050; -} - -#projectlogo -{ - text-align: center; - vertical-align: bottom; - border-collapse: separate; -} - -#projectlogo img -{ - border: 0px none; -} - -#projectname -{ - font: 300% Tahoma, Arial,sans-serif; - margin: 0px; - padding: 2px 0px; -} - -#projectbrief -{ - font: 120% Tahoma, Arial,sans-serif; - margin: 0px; - padding: 0px; -} - -#projectnumber -{ - font: 50% Tahoma, Arial,sans-serif; - margin: 0px; - padding: 0px; -} - -#titlearea -{ - padding: 0px; - margin: 0px; - width: 100%; - border-bottom: 1px solid #5373B4; -} - -.image -{ - text-align: left; -} - -.dotgraph -{ - text-align: center; -} - -.mscgraph -{ - text-align: center; -} - -.caption -{ - font-weight: bold; -} - diff --git a/AVR/lib/RF24/examples/GettingStarted/GettingStarted.pde b/AVR/lib/RF24/examples/GettingStarted/GettingStarted.pde deleted file mode 100644 index 3cb32d5..0000000 --- a/AVR/lib/RF24/examples/GettingStarted/GettingStarted.pde +++ /dev/null @@ -1,227 +0,0 @@ -/* - Copyright (C) 2011 J. Coliz - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - version 2 as published by the Free Software Foundation. - */ - -/** - * Example for Getting Started with nRF24L01+ radios. - * - * This is an example of how to use the RF24 class. Write this sketch to two - * different nodes. Put one of the nodes into 'transmit' mode by connecting - * with the serial monitor and sending a 'T'. The ping node sends the current - * time to the pong node, which responds by sending the value back. The ping - * node can then see how long the whole cycle took. - */ - -#include -#include "nRF24L01.h" -#include "RF24.h" -#include "printf.h" - -// -// Hardware configuration -// - -// Set up nRF24L01 radio on SPI bus plus pins 9 & 10 - -RF24 radio(9,10); - -// -// Topology -// - -// Radio pipe addresses for the 2 nodes to communicate. -const uint64_t pipes[2] = { 0xF0F0F0F0E1LL, 0xF0F0F0F0D2LL }; - -// -// Role management -// -// Set up role. This sketch uses the same software for all the nodes -// in this system. Doing so greatly simplifies testing. -// - -// The various roles supported by this sketch -typedef enum { role_ping_out = 1, role_pong_back } role_e; - -// The debug-friendly names of those roles -const char* role_friendly_name[] = { "invalid", "Ping out", "Pong back"}; - -// The role of the current running sketch -role_e role = role_pong_back; - -void setup(void) -{ - // - // Print preamble - // - - Serial.begin(57600); - printf_begin(); - printf("\n\rRF24/examples/GettingStarted/\n\r"); - printf("ROLE: %s\n\r",role_friendly_name[role]); - printf("*** PRESS 'T' to begin transmitting to the other node\n\r"); - - // - // Setup and configure rf radio - // - - radio.begin(); - - // optionally, increase the delay between retries & # of retries - radio.setRetries(15,15); - - // optionally, reduce the payload size. seems to - // improve reliability - radio.setPayloadSize(8); - - // - // Open pipes to other nodes for communication - // - - // This simple sketch opens two pipes for these two nodes to communicate - // back and forth. - // Open 'our' pipe for writing - // Open the 'other' pipe for reading, in position #1 (we can have up to 5 pipes open for reading) - - if ( role == role_ping_out ) - { - radio.openWritingPipe(pipes[0]); - radio.openReadingPipe(1,pipes[1]); - } - else - { - radio.openWritingPipe(pipes[1]); - radio.openReadingPipe(1,pipes[0]); - } - - // - // Start listening - // - - radio.startListening(); - - // - // Dump the configuration of the rf unit for debugging - // - - radio.printDetails(); -} - -void loop(void) -{ - // - // Ping out role. Repeatedly send the current time - // - - if (role == role_ping_out) - { - // First, stop listening so we can talk. - radio.stopListening(); - - // Take the time, and send it. This will block until complete - unsigned long time = millis(); - printf("Now sending %lu...",time); - bool ok = radio.write( &time, sizeof(unsigned long) ); - - if (ok) - printf("ok..."); - else - printf("failed.\n\r"); - - // Now, continue listening - radio.startListening(); - - // Wait here until we get a response, or timeout (250ms) - unsigned long started_waiting_at = millis(); - bool timeout = false; - while ( ! radio.available() && ! timeout ) - if (millis() - started_waiting_at > 200 ) - timeout = true; - - // Describe the results - if ( timeout ) - { - printf("Failed, response timed out.\n\r"); - } - else - { - // Grab the response, compare, and send to debugging spew - unsigned long got_time; - radio.read( &got_time, sizeof(unsigned long) ); - - // Spew it - printf("Got response %lu, round-trip delay: %lu\n\r",got_time,millis()-got_time); - } - - // Try again 1s later - delay(1000); - } - - // - // Pong back role. Receive each packet, dump it out, and send it back - // - - if ( role == role_pong_back ) - { - // if there is data ready - if ( radio.available() ) - { - // Dump the payloads until we've gotten everything - unsigned long got_time; - bool done = false; - while (!done) - { - // Fetch the payload, and see if this was the last one. - done = radio.read( &got_time, sizeof(unsigned long) ); - - // Spew it - printf("Got payload %lu...",got_time); - - // Delay just a little bit to let the other unit - // make the transition to receiver - delay(20); - } - - // First, stop listening so we can talk - radio.stopListening(); - - // Send the final one back. - radio.write( &got_time, sizeof(unsigned long) ); - printf("Sent response.\n\r"); - - // Now, resume listening so we catch the next packets. - radio.startListening(); - } - } - - // - // Change roles - // - - if ( Serial.available() ) - { - char c = toupper(Serial.read()); - if ( c == 'T' && role == role_pong_back ) - { - printf("*** CHANGING TO TRANSMIT ROLE -- PRESS 'R' TO SWITCH BACK\n\r"); - - // Become the primary transmitter (ping out) - role = role_ping_out; - radio.openWritingPipe(pipes[0]); - radio.openReadingPipe(1,pipes[1]); - } - else if ( c == 'R' && role == role_ping_out ) - { - printf("*** CHANGING TO RECEIVE ROLE -- PRESS 'T' TO SWITCH BACK\n\r"); - - // Become the primary receiver (pong back) - role = role_pong_back; - radio.openWritingPipe(pipes[1]); - radio.openReadingPipe(1,pipes[0]); - } - } -} -// vim:cin:ai:sts=2 sw=2 ft=cpp diff --git a/AVR/lib/RF24/examples/GettingStarted/Jamfile b/AVR/lib/RF24/examples/GettingStarted/Jamfile deleted file mode 100644 index 6a2499a..0000000 --- a/AVR/lib/RF24/examples/GettingStarted/Jamfile +++ /dev/null @@ -1,210 +0,0 @@ -# (1) Project Information - -PROJECT_LIBS = SPI RF24 ; - -# (2) Board Information - -UPLOAD_PROTOCOL ?= stk500v1 ; -UPLOAD_SPEED ?= 57600 ; -MCU ?= atmega328p ; -F_CPU ?= 16000000 ; -CORE ?= arduino ; -VARIANT ?= standard ; -ARDUINO_VERSION ?= 100 ; - -# (3) USB Ports - -PORTS = p4 p6 p9 u0 u1 u2 ; -PORT_p6 = /dev/tty.usbserial-A600eHIs ; -PORT_p4 = /dev/tty.usbserial-A40081RP ; -PORT_p9 = /dev/tty.usbserial-A9007LmI ; -PORT_u0 = /dev/ttyUSB0 ; -PORT_u1 = /dev/ttyUSB1 ; -PORT_u2 = /dev/ttyUSB2 ; - -# (4) Location of AVR tools -# -# This configuration assumes using avr-tools that were obtained separate from the Arduino -# distribution. - -if $(OS) = MACOSX -{ - AVR_BIN = /usr/local/avrtools/bin ; - AVR_ETC = /usr/local/avrtools/etc ; - AVR_INCLUDE = /usr/local/avrtools/include ; -} -else -{ - AVR_BIN = /usr/bin ; - AVR_INCLUDE = /usr/lib/avr/include ; - AVR_ETC = /etc ; -} - -# (5) Directories where Arduino core and libraries are located - -ARDUINO_DIR ?= /opt/Arduino ; -ARDUINO_CORE = $(ARDUINO_DIR)/hardware/arduino/cores/$(CORE) $(ARDUINO_DIR)/hardware/arduino/variants/$(VARIANT) ; -ARDUINO_LIB = $(ARDUINO_DIR)/libraries ; -SKETCH_LIB = $(HOME)/Source/Arduino/libraries ; - -# -# -------------------------------------------------- -# Below this line usually never needs to be modified -# - -# Tool locations - -CC = $(AVR_BIN)/avr-gcc ; -C++ = $(AVR_BIN)/avr-g++ ; -LINK = $(AVR_BIN)/avr-gcc ; -OBJCOPY = $(AVR_BIN)/avr-objcopy ; -AVRDUDE = $(AVR_BIN)/avrdude ; - -# Flags - -DEFINES += F_CPU=$(F_CPU)L ARDUINO=$(ARDUINO_VERSION) VERSION_H ; -OPTIM = -Os ; -CCFLAGS = -Wall -Wextra -mmcu=$(MCU) -ffunction-sections -fdata-sections ; -C++FLAGS = $(CCFLAGS) -fno-exceptions -fno-strict-aliasing ; -LINKFLAGS = $(OPTIM) -lm -Wl,--gc-sections -mmcu=$(MCU) ; -AVRDUDEFLAGS = -V -F -D -C $(AVR_ETC)/avrdude.conf -p $(MCU) -c $(UPLOAD_PROTOCOL) -b $(UPLOAD_SPEED) ; - -# Search everywhere for headers - -HDRS = $(PWD) $(AVR_INCLUDE) $(ARDUINO_CORE) $(ARDUINO_LIB)/$(PROJECT_LIBS) $(ARDUINO_LIB)/$(PROJECT_LIBS)/utility $(SKETCH_LIB)/$(PROJECT_LIBS) ; - -# Output locations - -LOCATE_TARGET = $(F_CPU) ; -LOCATE_SOURCE = $(F_CPU) ; - -# -# Custom rules -# - -rule GitVersion -{ - Always $(<) ; - Depends all : $(<) ; -} - -actions GitVersion -{ - echo "const char program_version[] = \"\\" > $(<) - git log -1 --pretty=format:%h >> $(<) - echo "\";" >> $(<) -} - -GitVersion version.h ; - -rule Pde -{ - Depends $(<) : $(>) ; - MakeLocate $(<) : $(LOCATE_SOURCE) ; - Clean clean : $(<) ; -} - -if ( $(ARDUINO_VERSION) < 100 ) -{ - ARDUINO_H = WProgram.h ; -} -else -{ - ARDUINO_H = Arduino.h ; -} - -actions Pde -{ - echo "#include <$(ARDUINO_H)>" > $(<) - echo "#line 1 \"$(>)\"" >> $(<) - cat $(>) >> $(<) -} - -rule C++Pde -{ - local _CPP = $(>:B).cpp ; - Pde $(_CPP) : $(>) ; - C++ $(<) : $(_CPP) ; -} - -rule UserObject -{ - switch $(>:S) - { - case .ino : C++Pde $(<) : $(>) ; - case .pde : C++Pde $(<) : $(>) ; - } -} - -rule Objects -{ - local _i ; - - for _i in [ FGristFiles $(<) ] - { - local _b = $(_i:B)$(SUFOBJ) ; - local _o = $(_b:G=$(SOURCE_GRIST:E)) ; - Object $(_o) : $(_i) ; - Depends obj : $(_o) ; - } -} - -rule Main -{ - MainFromObjects $(<) : $(>:B)$(SUFOBJ) ; - Objects $(>) ; -} - -rule Hex -{ - Depends $(<) : $(>) ; - MakeLocate $(<) : $(LOCATE_TARGET) ; - Depends hex : $(<) ; - Clean clean : $(<) ; -} - -actions Hex -{ - $(OBJCOPY) -O ihex -R .eeprom $(>) $(<) -} - -rule Upload -{ - Depends $(1) : $(2) ; - Depends $(2) : $(3) ; - NotFile $(1) ; - Always $(1) ; - Always $(2) ; - UploadAction $(2) : $(3) ; -} - -actions UploadAction -{ - $(AVRDUDE) $(AVRDUDEFLAGS) -P $(<) $(AVRDUDE_WRITE_FLASH) -U flash:w:$(>):i -} - -# -# Targets -# - -# Grab everything from the core directory -CORE_MODULES = [ GLOB $(ARDUINO_CORE) : *.c *.cpp ] ; - -# Grab everything from libraries. To avoid this "grab everything" behaviour, you -# can specify specific modules to pick up in PROJECT_MODULES -LIB_MODULES = [ GLOB $(ARDUINO_LIB)/$(PROJECT_LIBS) $(ARDUINO_LIB)/$(PROJECT_LIBS)/utility $(SKETCH_LIB)/$(PROJECT_LIBS) : *.cpp *.c ] ; - -# Grab everything from the current dir -PROJECT_MODULES += [ GLOB $(PWD) : *.c *.cpp *.pde *.ino ] ; - -# Main output executable -MAIN = $(PWD:B).elf ; - -Main $(MAIN) : $(CORE_MODULES) $(LIB_MODULES) $(PROJECT_MODULES) ; -Hex $(MAIN:B).hex : $(MAIN) ; - -# Upload targets -for _p in $(PORTS) -{ - Upload $(_p) : $(PORT_$(_p)) : $(MAIN:B).hex ; -} diff --git a/AVR/lib/RF24/examples/GettingStarted/printf.h b/AVR/lib/RF24/examples/GettingStarted/printf.h deleted file mode 100644 index b2efd56..0000000 --- a/AVR/lib/RF24/examples/GettingStarted/printf.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - Copyright (C) 2011 J. Coliz - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - version 2 as published by the Free Software Foundation. - */ - -/** - * @file printf.h - * - * Setup necessary to direct stdout to the Arduino Serial library, which - * enables 'printf' - */ - -#ifndef __PRINTF_H__ -#define __PRINTF_H__ - -#ifdef ARDUINO - -int serial_putc( char c, FILE * ) -{ - Serial.write( c ); - - return c; -} - -void printf_begin(void) -{ - fdevopen( &serial_putc, 0 ); -} - -#else -#error This example is only for use on Arduino. -#endif // ARDUINO - -#endif // __PRINTF_H__ diff --git a/AVR/lib/RF24/examples/led_remote/Jamfile b/AVR/lib/RF24/examples/led_remote/Jamfile deleted file mode 100644 index 901f8da..0000000 --- a/AVR/lib/RF24/examples/led_remote/Jamfile +++ /dev/null @@ -1,206 +0,0 @@ -PROJECT_NAME = $(PWD:B) ; -PROJECT_DIR = . ; -PROJECT_LIBS = SPI RF24 ; - -OUT_DIR = ojam ; -F_CPU = 16000000 ; -MCU = atmega328p ; -PORTS = /dev/tty.usbserial-A600eHIs /dev/tty.usbserial-A40081RP /dev/tty.usbserial-A9007LmI ; - -UPLOAD_RATE = 57600 ; -AVRDUDE_PROTOCOL = stk500v1 ; -COM = 33 ; - -# Host-specific overrides for locations -if $(OS) = MACOSX -{ -ARDUINO_VERSION = 22 ; -OLD_DIR = /opt/arduino-0021 ; -AVR_TOOLS_PATH = $(OLD_DIR)/hardware/tools/avr/bin ; -AVRDUDECONFIG_PATH = $(OLD_DIR)/hardware/tools/avr/etc ; -ARDUINO_DIR = /opt/Arduino ; -ARDUINO_AVR = /usr/lib/avr/include ; -} - -# Where is everything? -ARDUINO_VERSION ?= 22 ; -AVR_TOOLS_PATH ?= /usr/bin ; -ARDUINO_DIR ?= /opt/arduino-00$(ARDUINO_VERSION) ; -ARDUINO_AVR ?= $(ARDUINO_DIR)/hardware/tools/avr/avr/include/avr ; -AVRDUDECONFIG_PATH ?= $(ARDUINO_DIR)/hardware/tools ; -ARDUINO_CORE = $(ARDUINO_DIR)/hardware/arduino/cores/arduino ; -ARDUINO_LIB = $(ARDUINO_DIR)/libraries ; -SKETCH_LIB = $(HOME)/Source/Arduino/libraries ; -AVR_CC = $(AVR_TOOLS_PATH)/avr-gcc ; -AVR_CXX = $(AVR_TOOLS_PATH)/avr-g++ ; -AVR_LD = $(AVR_TOOLS_PATH)/avr-gcc ; -AVR_OBJCOPY = $(AVR_TOOLS_PATH)/avr-objcopy ; -AVRDUDE = $(AVR_TOOLS_PATH)/avrdude ; - -DEFINES = F_CPU=$(F_CPU)L ARDUINO=$(ARDUINO_VERSION) VERSION_H ; -CTUNING = -ffunction-sections -fdata-sections ; -CXXTUNING = -fno-exceptions -fno-strict-aliasing ; -CFLAGS = -Os -Wall -Wextra -mmcu=$(MCU) $(CTUNING) ; -CXXFLAGS = $(CFLAGS) $(CXXTUNING) ; -LDFLAGS = -Os -lm -Wl,--gc-sections -mmcu=atmega328p ; - -# Search everywhere for headers -HDRS = $(PROJECT_DIR) $(ARDUINO_AVR) $(ARDUINO_CORE) [ GLOB $(ARDUINO_LIB) $(SKETCH_LIB) : [^.]* ] ; - -# Grab everything from the core directory -CORE_MODULES = [ GLOB $(ARDUINO_CORE) : *.c *.cpp ] ; - -# Grab everything from libraries. To avoid this "grab everything" behaviour, you -# can specify specific modules to pick up in PROJECT_MODULES -LIB_MODULES = [ GLOB $(ARDUINO_LIB)/$(PROJECT_LIBS) $(SKETCH_LIB)/$(PROJECT_LIBS) : *.cpp ] ; - -# In addition to explicitly-specified program modules, pick up anything from the current -# dir. -PROJECT_MODULES += [ GLOB $(PROJECT_DIR) : *.c *.cpp *.pde ] ; - -# Shortcut for the out files -OUT = $(OUT_DIR)/$(PROJECT_NAME) ; - -# AvrDude setup -AVRDUDE_FLAGS = -V -F -D -C $(AVRDUDECONFIG_PATH)/avrdude.conf -p $(MCU) -c $(AVRDUDE_PROTOCOL) -b $(UPLOAD_RATE) ; - -rule GitVersion -{ - Always $(<) ; - Depends all : $(<) ; -} - -actions GitVersion -{ - echo "const char program_version[] = \"\\" > $(<) - git log -1 --pretty=format:%h >> $(<) - echo "\";" >> $(<) -} - -GitVersion version.h ; - -rule AvrCc -{ - Depends $(<) : $(>) ; - Depends $(<) : $(<:D) ; - Clean clean : $(<) ; - - CCHDRS on $(<) = [ on $(<) FIncludes $(HDRS) ] ; - CCDEFS on $(<) = [ on $(<) FDefines $(DEFINES) ] ; -} - -actions AvrCc -{ - $(AVR_CC) -c -o $(<) $(CCHDRS) $(CCDEFS) $(CFLAGS) $(>) -} - -rule AvrC++ -{ - Depends $(<) : $(>) ; - Depends $(<) : $(<:D) ; - Clean clean : $(<) ; - - CCHDRS on $(<) = [ on $(<) FIncludes $(HDRS) ] ; - CCDEFS on $(<) = [ on $(<) FDefines $(DEFINES) ] ; -} - -actions AvrC++ -{ - $(AVR_CXX) -c -o $(<) $(CCHDRS) $(CCDEFS) $(CXXFLAGS) $(>) -} - -rule Pde -{ - Depends $(<) : $(>) ; - Depends $(<) : $(<:D) ; - Clean clean : $(<) ; - -} - -actions Pde -{ - echo "#include " > $(<) - echo "#line 1 \"$(>)\"" >> $(<) - cat $(>) >> $(<) -} - -rule AvrPde -{ - local _CPP = $(OUT_DIR)/$(_I:B).cpp ; - Pde $(_CPP) : $(>) ; - AvrC++ $(<) : $(_CPP) ; -} - -rule AvrObject -{ - switch $(>:S) - { - case .c : AvrCc $(<) : $(>) ; - case .cpp : AvrC++ $(<) : $(>) ; - case .pde : AvrPde $(<) : $(>) ; - } -} - -rule AvrObjects -{ - for _I in $(<) - { - AvrObject $(OUT_DIR)/$(_I:B).o : $(_I) ; - } -} - -rule AvrMainFromObjects -{ - Depends $(<) : $(>) ; - Depends $(<) : $(<:D) ; - MkDir $(<:D) ; - Depends all : $(<) ; - Clean clean : $(<) ; -} - -actions AvrMainFromObjects -{ - $(AVR_LD) $(LDFLAGS) -o $(<) $(>) -} - -rule AvrMain -{ - AvrMainFromObjects $(<) : $(OUT_DIR)/$(>:B).o ; - AvrObjects $(>) ; -} - -rule AvrHex -{ - Depends $(<) : $(>) ; - Depends $(<) : $(<:D) ; - Depends hex : $(<) ; - Clean clean : $(<) ; -} - -actions AvrHex -{ - $(AVR_OBJCOPY) -O ihex -R .eeprom $(>) $(<) -} - -rule AvrUpload -{ - Depends $(1) : $(2) ; - Depends $(2) : $(3) ; - NotFile $(1) ; - Always $(1) ; - Always $(2) ; - AvrUploadAction $(2) : $(3) ; -} - -actions AvrUploadAction -{ - $(AVRDUDE) $(AVRDUDE_FLAGS) -P $(<) $(AVRDUDE_WRITE_FLASH) -U flash:w:$(>):i -} - -AvrMain $(OUT).elf : $(CORE_MODULES) $(LIB_MODULES) $(PROJECT_MODULES) ; -AvrHex $(OUT).hex : $(OUT).elf ; - -AvrUpload p6 : /dev/tty.usbserial-A600eHIs : $(OUT).hex ; -AvrUpload p4 : /dev/tty.usbserial-A40081RP : $(OUT).hex ; -AvrUpload p9 : /dev/tty.usbserial-A9007LmI : $(OUT).hex ; - diff --git a/AVR/lib/RF24/examples/led_remote/led_remote.pde b/AVR/lib/RF24/examples/led_remote/led_remote.pde deleted file mode 100644 index 7aeeb3b..0000000 --- a/AVR/lib/RF24/examples/led_remote/led_remote.pde +++ /dev/null @@ -1,255 +0,0 @@ -/* - Copyright (C) 2011 J. Coliz - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - version 2 as published by the Free Software Foundation. - */ - -/** - * Example LED Remote - * - * This is an example of how to use the RF24 class to control a remote - * bank of LED's using buttons on a remote control. - * - * On the 'remote', connect any number of buttons or switches from - * an arduino pin to ground. Update 'button_pins' to reflect the - * pins used. - * - * On the 'led' board, connect the same number of LED's from an - * arduino pin to a resistor to ground. Update 'led_pins' to reflect - * the pins used. Also connect a separate pin to ground and change - * the 'role_pin'. This tells the sketch it's running on the LED board. - * - * Every time the buttons change on the remote, the entire state of - * buttons is send to the led board, which displays the state. - */ - -#include -#include "nRF24L01.h" -#include "RF24.h" -#include "printf.h" - -// -// Hardware configuration -// - -// Set up nRF24L01 radio on SPI bus plus pins 9 & 10 - -RF24 radio(9,10); - -// sets the role of this unit in hardware. Connect to GND to be the 'led' board receiver -// Leave open to be the 'remote' transmitter -const int role_pin = A4; - -// Pins on the remote for buttons -const uint8_t button_pins[] = { 2,3,4,5,6,7 }; -const uint8_t num_button_pins = sizeof(button_pins); - -// Pins on the LED board for LED's -const uint8_t led_pins[] = { 2,3,4,5,6,7 }; -const uint8_t num_led_pins = sizeof(led_pins); - -// -// Topology -// - -// Single radio pipe address for the 2 nodes to communicate. -const uint64_t pipe = 0xE8E8F0F0E1LL; - -// -// Role management -// -// Set up role. This sketch uses the same software for all the nodes in this -// system. Doing so greatly simplifies testing. The hardware itself specifies -// which node it is. -// -// This is done through the role_pin -// - -// The various roles supported by this sketch -typedef enum { role_remote = 1, role_led } role_e; - -// The debug-friendly names of those roles -const char* role_friendly_name[] = { "invalid", "Remote", "LED Board"}; - -// The role of the current running sketch -role_e role; - -// -// Payload -// - -uint8_t button_states[num_button_pins]; -uint8_t led_states[num_led_pins]; - -// -// Setup -// - -void setup(void) -{ - // - // Role - // - - // set up the role pin - pinMode(role_pin, INPUT); - digitalWrite(role_pin,HIGH); - delay(20); // Just to get a solid reading on the role pin - - // read the address pin, establish our role - if ( digitalRead(role_pin) ) - role = role_remote; - else - role = role_led; - - // - // Print preamble - // - - Serial.begin(57600); - printf_begin(); - printf("\n\rRF24/examples/led_remote/\n\r"); - printf("ROLE: %s\n\r",role_friendly_name[role]); - - // - // Setup and configure rf radio - // - - radio.begin(); - - // - // Open pipes to other nodes for communication - // - - // This simple sketch opens a single pipes for these two nodes to communicate - // back and forth. One listens on it, the other talks to it. - - if ( role == role_remote ) - { - radio.openWritingPipe(pipe); - } - else - { - radio.openReadingPipe(1,pipe); - } - - // - // Start listening - // - - if ( role == role_led ) - radio.startListening(); - - // - // Dump the configuration of the rf unit for debugging - // - - radio.printDetails(); - - // - // Set up buttons / LED's - // - - // Set pull-up resistors for all buttons - if ( role == role_remote ) - { - int i = num_button_pins; - while(i--) - { - pinMode(button_pins[i],INPUT); - digitalWrite(button_pins[i],HIGH); - } - } - - // Turn LED's ON until we start getting keys - if ( role == role_led ) - { - int i = num_led_pins; - while(i--) - { - pinMode(button_pins[i],OUTPUT); - led_states[i] = HIGH; - digitalWrite(led_pins[i],led_states[i]); - } - } - -} - -// -// Loop -// - -void loop(void) -{ - // - // Remote role. If the state of any button has changed, send the whole state of - // all buttons. - // - - if ( role == role_remote ) - { - // Get the current state of buttons, and - // Test if the current state is different from the last state we sent - int i = num_button_pins; - bool different = false; - while(i--) - { - uint8_t state = ! digitalRead(button_pins[i]); - if ( state != button_states[i] ) - { - different = true; - button_states[i] = state; - } - } - - // Send the state of the buttons to the LED board - if ( different ) - { - printf("Now sending..."); - bool ok = radio.write( button_states, num_button_pins ); - if (ok) - printf("ok\n\r"); - else - printf("failed\n\r"); - } - - // Try again in a short while - delay(20); - } - - // - // LED role. Receive the state of all buttons, and reflect that in the LEDs - // - - if ( role == role_led ) - { - // if there is data ready - if ( radio.available() ) - { - // Dump the payloads until we've gotten everything - bool done = false; - while (!done) - { - // Fetch the payload, and see if this was the last one. - done = radio.read( button_states, num_button_pins ); - - // Spew it - printf("Got buttons\n\r"); - - // For each button, if the button now on, then toggle the LED - int i = num_led_pins; - while(i--) - { - if ( button_states[i] ) - { - led_states[i] ^= HIGH; - digitalWrite(led_pins[i],led_states[i]); - } - } - } - } - } -} -// vim:ai:cin:sts=2 sw=2 ft=cpp diff --git a/AVR/lib/RF24/examples/led_remote/printf.h b/AVR/lib/RF24/examples/led_remote/printf.h deleted file mode 100644 index b2efd56..0000000 --- a/AVR/lib/RF24/examples/led_remote/printf.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - Copyright (C) 2011 J. Coliz - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - version 2 as published by the Free Software Foundation. - */ - -/** - * @file printf.h - * - * Setup necessary to direct stdout to the Arduino Serial library, which - * enables 'printf' - */ - -#ifndef __PRINTF_H__ -#define __PRINTF_H__ - -#ifdef ARDUINO - -int serial_putc( char c, FILE * ) -{ - Serial.write( c ); - - return c; -} - -void printf_begin(void) -{ - fdevopen( &serial_putc, 0 ); -} - -#else -#error This example is only for use on Arduino. -#endif // ARDUINO - -#endif // __PRINTF_H__ diff --git a/AVR/lib/RF24/examples/nordic_fob/Jamfile b/AVR/lib/RF24/examples/nordic_fob/Jamfile deleted file mode 100644 index ec519f7..0000000 --- a/AVR/lib/RF24/examples/nordic_fob/Jamfile +++ /dev/null @@ -1,219 +0,0 @@ -# (1) Project Information - -PROJECT_LIBS = RF24 SPI ; -PROJECT_DIRS = $(PWD) ; - -# (2) Board Information - -UPLOAD_PROTOCOL ?= stk500v1 ; -UPLOAD_SPEED ?= 115200 ; -MCU ?= atmega328p ; -F_CPU ?= 16000000 ; -CORE ?= arduino ; -VARIANT ?= standard ; -ARDUINO_VERSION ?= 100 ; - -# (3) USB Ports - -PORTS = p4 p6 p9 u0 u1 u2 ; -PORT_p6 = /dev/tty.usbserial-A600eHIs ; -PORT_p4 = /dev/tty.usbserial-A40081RP ; -PORT_p9 = /dev/tty.usbserial-A9007LmI ; -PORT_u0 = /dev/ttyUSB0 ; -PORT_u1 = /dev/ttyUSB1 ; -PORT_u2 = /dev/ttyUSB2 ; - -# (4) Location of AVR tools -# -# This configuration assumes using avr-tools that were obtained separate from the Arduino -# distribution. - -if $(OS) = MACOSX -{ - AVR_BIN = /usr/local/avrtools/bin ; - AVR_ETC = /usr/local/avrtools/etc ; - AVR_INCLUDE = /usr/local/avrtools/include ; -} -else -{ - AVR_BIN = /usr/bin ; - AVR_INCLUDE = /usr/lib/avr/include ; - AVR_ETC = /etc ; -} - -# (5) Directories where Arduino core and libraries are located - -ARDUINO_DIR ?= /opt/Arduino ; -ARDUINO_CORE = $(ARDUINO_DIR)/hardware/arduino/cores/$(CORE) $(ARDUINO_DIR)/hardware/arduino/variants/$(VARIANT) ; -ARDUINO_LIB = $(ARDUINO_DIR)/libraries ; -SKETCH_LIB = $(HOME)/Source/Arduino/libraries ; - -# -# -------------------------------------------------- -# Below this line usually never needs to be modified -# - -# Tool locations - -CC = $(AVR_BIN)/avr-gcc ; -C++ = $(AVR_BIN)/avr-g++ ; -LINK = $(AVR_BIN)/avr-gcc ; -AR = $(AVR_BIN)/avr-ar rcs ; -RANLIB = ; -OBJCOPY = $(AVR_BIN)/avr-objcopy ; -AVRDUDE = $(AVR_BIN)/avrdude ; - -# Flags - -DEFINES += F_CPU=$(F_CPU)L ARDUINO=$(ARDUINO_VERSION) VERSION_H ; -OPTIM = -Os ; -CCFLAGS = -Wall -Wextra -Wno-strict-aliasing -mmcu=$(MCU) -ffunction-sections -fdata-sections ; -C++FLAGS = $(CCFLAGS) -fno-exceptions -fno-strict-aliasing ; -LINKFLAGS = $(OPTIM) -lm -Wl,--gc-sections -mmcu=$(MCU) ; -AVRDUDEFLAGS = -V -F -D -C $(AVR_ETC)/avrdude.conf -p $(MCU) -c $(UPLOAD_PROTOCOL) -b $(UPLOAD_SPEED) ; - -# Search everywhere for headers - -HDRS = $(PROJECT_DIRS) $(AVR_INCLUDE) $(ARDUINO_CORE) $(ARDUINO_LIB)/$(PROJECT_LIBS) $(ARDUINO_LIB)/$(PROJECT_LIBS)/utility $(SKETCH_LIB)/$(PROJECT_LIBS) ; - -# Output locations - -LOCATE_TARGET = $(F_CPU) ; -LOCATE_SOURCE = $(F_CPU) ; - -# -# Custom rules -# - -rule GitVersion -{ - Always $(<) ; - Depends all : $(<) ; -} - -actions GitVersion -{ - echo "const char program_version[] = \"\\" > $(<) - git log -1 --pretty=format:%h >> $(<) - echo "\";" >> $(<) -} - -GitVersion version.h ; - -rule Pde -{ - Depends $(<) : $(>) ; - MakeLocate $(<) : $(LOCATE_SOURCE) ; - Clean clean : $(<) ; -} - -if ( $(ARDUINO_VERSION) < 100 ) -{ - ARDUINO_H = WProgram.h ; -} -else -{ - ARDUINO_H = Arduino.h ; -} - -actions Pde -{ - echo "#include <$(ARDUINO_H)>" > $(<) - echo "#line 1 \"$(>)\"" >> $(<) - cat $(>) >> $(<) -} - -rule C++Pde -{ - local _CPP = $(>:B).cpp ; - Pde $(_CPP) : $(>) ; - C++ $(<) : $(_CPP) ; -} - -rule UserObject -{ - switch $(>:S) - { - case .ino : C++Pde $(<) : $(>) ; - case .pde : C++Pde $(<) : $(>) ; - } -} - -rule Objects -{ - local _i ; - - for _i in [ FGristFiles $(<) ] - { - local _b = $(_i:B)$(SUFOBJ) ; - local _o = $(_b:G=$(SOURCE_GRIST:E)) ; - Object $(_o) : $(_i) ; - Depends obj : $(_o) ; - } -} - -rule Library -{ - LibraryFromObjects $(<) : $(>:B)$(SUFOBJ) ; - Objects $(>) ; -} - -rule Main -{ - MainFromObjects $(<) : $(>:B)$(SUFOBJ) ; - Objects $(>) ; -} - -rule Hex -{ - Depends $(<) : $(>) ; - MakeLocate $(<) : $(LOCATE_TARGET) ; - Depends hex : $(<) ; - Clean clean : $(<) ; -} - -actions Hex -{ - $(OBJCOPY) -O ihex -R .eeprom $(>) $(<) -} - -rule Upload -{ - Depends $(1) : $(2) ; - Depends $(2) : $(3) ; - NotFile $(1) ; - Always $(1) ; - Always $(2) ; - UploadAction $(2) : $(3) ; -} - -actions UploadAction -{ - $(AVRDUDE) $(AVRDUDEFLAGS) -P $(<) $(AVRDUDE_WRITE_FLASH) -U flash:w:$(>):i -} - -rule Arduino -{ - LINKFLAGS on $(<) = $(LINKFLAGS) -Wl,-Map=$(LOCATE_TARGET)/$(<:B).map ; - Main $(<) : $(>) ; - LinkLibraries $(<) : libs core ; - Hex $(<:B).hex : $(<) ; - for _p in $(PORTS) - { - Upload $(_p) : $(PORT_$(_p)) : $(<:B).hex ; - } -} - -# -# Targets -# - -# Grab everything from the core directory -Library core : [ GLOB $(ARDUINO_CORE) : *.c *.cpp ] ; - -# Grab everything from libraries. To avoid this "grab everything" behaviour, you -# can specify specific modules to pick up in PROJECT_MODULES -Library libs : [ GLOB $(ARDUINO_LIB)/$(PROJECT_LIBS) $(ARDUINO_LIB)/$(PROJECT_LIBS)/utility $(SKETCH_LIB)/$(PROJECT_LIBS) : *.cpp *.c ] ; - -# Main output executable -Arduino $(PWD:B).elf : $(PROJECT_MODULES) [ GLOB $(PROJECT_DIRS) : *.c *.cpp *.pde *.ino ] ; diff --git a/AVR/lib/RF24/examples/nordic_fob/nordic_fob.pde b/AVR/lib/RF24/examples/nordic_fob/nordic_fob.pde deleted file mode 100644 index 5a316a0..0000000 --- a/AVR/lib/RF24/examples/nordic_fob/nordic_fob.pde +++ /dev/null @@ -1,142 +0,0 @@ -/* - Copyright (C) 2012 J. Coliz - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - version 2 as published by the Free Software Foundation. - */ - -/** - * Example Nordic FOB Receiver - * - * This is an example of how to use the RF24 class to receive signals from the - * Sparkfun Nordic FOB. Thanks to Kirk Mower for providing test hardware. - * - * See blog post at http://maniacbug.wordpress.com/2012/01/08/nordic-fob/ - */ - -#include -#include -#include "nRF24L01.h" -#include "printf.h" - -// -// Hardware configuration -// - -// Set up nRF24L01 radio on SPI bus plus pins 9 & 10 - -RF24 radio(9,10); - -// -// Payload -// - -struct payload_t -{ - uint8_t buttons; - uint16_t id; - uint8_t empty; -}; - -const char* button_names[] = { "Up", "Down", "Left", "Right", "Center" }; -const int num_buttons = 5; - -// -// Forward declarations -// - -uint16_t flip_endian(uint16_t in); - -// -// Setup -// - -void setup(void) -{ - // - // Print preamble - // - - Serial.begin(57600); - printf_begin(); - printf("\r\nRF24/examples/nordic_fob/\r\n"); - - // - // Setup and configure rf radio according to the built-in parameters - // of the FOB. - // - - radio.begin(); - radio.setChannel(2); - radio.setPayloadSize(4); - radio.setAutoAck(false); - radio.setCRCLength(RF24_CRC_8); - radio.openReadingPipe(1,0xE7E7E7E7E7LL); - - // - // Start listening - // - - radio.startListening(); - - // - // Dump the configuration of the rf unit for debugging - // - - radio.printDetails(); -} - -// -// Loop -// - -void loop(void) -{ - // - // Receive each packet, dump it out - // - - // if there is data ready - if ( radio.available() ) - { - // Get the packet from the radio - payload_t payload; - radio.read( &payload, sizeof(payload) ); - - // Print the ID of this message. Note that the message - // is sent 'big-endian', so we have to flip it. - printf("#%05u Buttons ",flip_endian(payload.id)); - - // Print the name of each button - int i = num_buttons; - while (i--) - { - if ( ! ( payload.buttons & _BV(i) ) ) - { - printf("%s ",button_names[i]); - } - } - - // If no buttons, print None - if ( payload.buttons == _BV(num_buttons) - 1 ) - printf("None"); - - printf("\r\n"); - } -} - -// -// Helper functions -// - -// Change a big-endian word into a little-endian -uint16_t flip_endian(uint16_t in) -{ - uint16_t low = in >> 8; - uint16_t high = in << 8; - - return high | low; -} - -// vim:cin:ai:sts=2 sw=2 ft=cpp diff --git a/AVR/lib/RF24/examples/nordic_fob/printf.h b/AVR/lib/RF24/examples/nordic_fob/printf.h deleted file mode 100644 index b2efd56..0000000 --- a/AVR/lib/RF24/examples/nordic_fob/printf.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - Copyright (C) 2011 J. Coliz - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - version 2 as published by the Free Software Foundation. - */ - -/** - * @file printf.h - * - * Setup necessary to direct stdout to the Arduino Serial library, which - * enables 'printf' - */ - -#ifndef __PRINTF_H__ -#define __PRINTF_H__ - -#ifdef ARDUINO - -int serial_putc( char c, FILE * ) -{ - Serial.write( c ); - - return c; -} - -void printf_begin(void) -{ - fdevopen( &serial_putc, 0 ); -} - -#else -#error This example is only for use on Arduino. -#endif // ARDUINO - -#endif // __PRINTF_H__ diff --git a/AVR/lib/RF24/examples/pingpair/Jamfile b/AVR/lib/RF24/examples/pingpair/Jamfile deleted file mode 100644 index 18244ec..0000000 --- a/AVR/lib/RF24/examples/pingpair/Jamfile +++ /dev/null @@ -1,219 +0,0 @@ -# (1) Project Information - -PROJECT_LIBS = SPI RF24 ; -PROJECT_DIRS = $(PWD) ; - -# (2) Board Information - -UPLOAD_PROTOCOL ?= arduino ; -UPLOAD_SPEED ?= 115200 ; -MCU ?= atmega328p ; -F_CPU ?= 16000000 ; -CORE ?= arduino ; -VARIANT ?= standard ; -ARDUINO_VERSION ?= 100 ; - -# (3) USB Ports - -PORTS = p4 p6 p9 u0 u1 u2 ; -PORT_p6 = /dev/tty.usbserial-A600eHIs ; -PORT_p4 = /dev/tty.usbserial-A40081RP ; -PORT_p9 = /dev/tty.usbserial-A9007LmI ; -PORT_u0 = /dev/ttyUSB0 ; -PORT_u1 = /dev/ttyUSB1 ; -PORT_u2 = /dev/ttyUSB2 ; - -# (4) Location of AVR tools -# -# This configuration assumes using avr-tools that were obtained separate from the Arduino -# distribution. - -if $(OS) = MACOSX -{ - AVR_BIN ?= /usr/local/avrtools/bin ; - AVR_ETC = /usr/local/avrtools/etc ; - AVR_INCLUDE = /usr/local/avrtools/include ; -} -else -{ - AVR_BIN ?= /usr/bin ; - AVR_INCLUDE = /usr/lib/avr/include ; - AVR_ETC = /etc ; -} - -# (5) Directories where Arduino core and libraries are located - -ARDUINO_DIR ?= /opt/Arduino ; -ARDUINO_CORE = $(ARDUINO_DIR)/hardware/arduino/cores/$(CORE) $(ARDUINO_DIR)/hardware/arduino/variants/$(VARIANT) ; -ARDUINO_LIB = $(ARDUINO_DIR)/libraries ; -SKETCH_LIB = $(HOME)/Source/Arduino/libraries ; - -# -# -------------------------------------------------- -# Below this line usually never needs to be modified -# - -# Tool locations - -CC = $(AVR_BIN)/avr-gcc ; -C++ = $(AVR_BIN)/avr-g++ ; -LINK = $(AVR_BIN)/avr-gcc ; -AR = $(AVR_BIN)/avr-ar rcs ; -RANLIB = ; -OBJCOPY = $(AVR_BIN)/avr-objcopy ; -AVRDUDE ?= $(AVR_BIN)/avrdude ; - -# Flags - -DEFINES += F_CPU=$(F_CPU)L ARDUINO=$(ARDUINO_VERSION) VERSION_H ; -OPTIM = -Os ; -CCFLAGS = -Wall -Wextra -Wno-strict-aliasing -mmcu=$(MCU) -ffunction-sections -fdata-sections ; -C++FLAGS = $(CCFLAGS) -fno-exceptions -fno-strict-aliasing ; -LINKFLAGS = $(OPTIM) -lm -Wl,--gc-sections -mmcu=$(MCU) ; -AVRDUDEFLAGS = -V -F -D -C $(AVR_ETC)/avrdude.conf -p $(MCU) -c $(UPLOAD_PROTOCOL) -b $(UPLOAD_SPEED) ; - -# Search everywhere for headers - -HDRS = $(PROJECT_DIRS) $(AVR_INCLUDE) $(ARDUINO_CORE) $(ARDUINO_LIB)/$(PROJECT_LIBS) $(ARDUINO_LIB)/$(PROJECT_LIBS)/utility $(SKETCH_LIB)/$(PROJECT_LIBS) ; - -# Output locations - -LOCATE_TARGET = $(F_CPU) ; -LOCATE_SOURCE = $(F_CPU) ; - -# -# Custom rules -# - -rule GitVersion -{ - Always $(<) ; - Depends all : $(<) ; -} - -actions GitVersion -{ - echo "const char program_version[] = \"\\" > $(<) - git log -1 --pretty=format:%h >> $(<) - echo "\";" >> $(<) -} - -GitVersion version.h ; - -rule Pde -{ - Depends $(<) : $(>) ; - MakeLocate $(<) : $(LOCATE_SOURCE) ; - Clean clean : $(<) ; -} - -if ( $(ARDUINO_VERSION) < 100 ) -{ - ARDUINO_H = WProgram.h ; -} -else -{ - ARDUINO_H = Arduino.h ; -} - -actions Pde -{ - echo "#include <$(ARDUINO_H)>" > $(<) - echo "#line 1 \"$(>)\"" >> $(<) - cat $(>) >> $(<) -} - -rule C++Pde -{ - local _CPP = $(>:B).cpp ; - Pde $(_CPP) : $(>) ; - C++ $(<) : $(_CPP) ; -} - -rule UserObject -{ - switch $(>:S) - { - case .ino : C++Pde $(<) : $(>) ; - case .pde : C++Pde $(<) : $(>) ; - } -} - -rule Objects -{ - local _i ; - - for _i in [ FGristFiles $(<) ] - { - local _b = $(_i:B)$(SUFOBJ) ; - local _o = $(_b:G=$(SOURCE_GRIST:E)) ; - Object $(_o) : $(_i) ; - Depends obj : $(_o) ; - } -} - -rule Library -{ - LibraryFromObjects $(<) : $(>:B)$(SUFOBJ) ; - Objects $(>) ; -} - -rule Main -{ - MainFromObjects $(<) : $(>:B)$(SUFOBJ) ; - Objects $(>) ; -} - -rule Hex -{ - Depends $(<) : $(>) ; - MakeLocate $(<) : $(LOCATE_TARGET) ; - Depends hex : $(<) ; - Clean clean : $(<) ; -} - -actions Hex -{ - $(OBJCOPY) -O ihex -R .eeprom $(>) $(<) -} - -rule Upload -{ - Depends $(1) : $(2) ; - Depends $(2) : $(3) ; - NotFile $(1) ; - Always $(1) ; - Always $(2) ; - UploadAction $(2) : $(3) ; -} - -actions UploadAction -{ - $(AVRDUDE) $(AVRDUDEFLAGS) -P $(<) $(AVRDUDE_WRITE_FLASH) -U flash:w:$(>):i -} - -rule Arduino -{ - LINKFLAGS on $(<) = $(LINKFLAGS) -Wl,-Map=$(LOCATE_TARGET)/$(<:B).map ; - Main $(<) : $(>) ; - LinkLibraries $(<) : core libs ; - Hex $(<:B).hex : $(<) ; - for _p in $(PORTS) - { - Upload $(_p) : $(PORT_$(_p)) : $(<:B).hex ; - } -} - -# -# Targets -# - -# Grab everything from the core directory -Library core : [ GLOB $(ARDUINO_CORE) : *.c *.cpp ] ; - -# Grab everything from libraries. To avoid this "grab everything" behaviour, you -# can specify specific modules to pick up in PROJECT_MODULES -Library libs : [ GLOB $(ARDUINO_LIB)/$(PROJECT_LIBS) $(ARDUINO_LIB)/$(PROJECT_LIBS)/utility $(SKETCH_LIB)/$(PROJECT_LIBS) : *.cpp *.c ] ; - -# Main output executable -Arduino $(PWD:B).elf : $(PROJECT_MODULES) [ GLOB $(PROJECT_DIRS) : *.c *.cpp *.pde *.ino ] ; diff --git a/AVR/lib/RF24/examples/pingpair/pingpair.pde b/AVR/lib/RF24/examples/pingpair/pingpair.pde deleted file mode 100644 index 3a57a67..0000000 --- a/AVR/lib/RF24/examples/pingpair/pingpair.pde +++ /dev/null @@ -1,220 +0,0 @@ -/* - Copyright (C) 2011 J. Coliz - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - version 2 as published by the Free Software Foundation. - */ - -/** - * Example RF Radio Ping Pair - * - * This is an example of how to use the RF24 class. Write this sketch to two different nodes, - * connect the role_pin to ground on one. The ping node sends the current time to the pong node, - * which responds by sending the value back. The ping node can then see how long the whole cycle - * took. - */ - -#include -#include "nRF24L01.h" -#include "RF24.h" -#include "printf.h" - -// -// Hardware configuration -// - -// Set up nRF24L01 radio on SPI bus plus pins 9 & 10 - -RF24 radio(9,10); - -// sets the role of this unit in hardware. Connect to GND to be the 'pong' receiver -// Leave open to be the 'ping' transmitter -const int role_pin = 7; - -// -// Topology -// - -// Radio pipe addresses for the 2 nodes to communicate. -const uint64_t pipes[2] = { 0xF0F0F0F0E1LL, 0xF0F0F0F0D2LL }; - -// -// Role management -// -// Set up role. This sketch uses the same software for all the nodes -// in this system. Doing so greatly simplifies testing. The hardware itself specifies -// which node it is. -// -// This is done through the role_pin -// - -// The various roles supported by this sketch -typedef enum { role_ping_out = 1, role_pong_back } role_e; - -// The debug-friendly names of those roles -const char* role_friendly_name[] = { "invalid", "Ping out", "Pong back"}; - -// The role of the current running sketch -role_e role; - -void setup(void) -{ - // - // Role - // - - // set up the role pin - pinMode(role_pin, INPUT); - digitalWrite(role_pin,HIGH); - delay(20); // Just to get a solid reading on the role pin - - // read the address pin, establish our role - if ( ! digitalRead(role_pin) ) - role = role_ping_out; - else - role = role_pong_back; - - // - // Print preamble - // - - Serial.begin(57600); - printf_begin(); - printf("\n\rRF24/examples/pingpair/\n\r"); - printf("ROLE: %s\n\r",role_friendly_name[role]); - - // - // Setup and configure rf radio - // - - radio.begin(); - - // optionally, increase the delay between retries & # of retries - radio.setRetries(15,15); - - // optionally, reduce the payload size. seems to - // improve reliability - radio.setPayloadSize(8); - - // - // Open pipes to other nodes for communication - // - - // This simple sketch opens two pipes for these two nodes to communicate - // back and forth. - // Open 'our' pipe for writing - // Open the 'other' pipe for reading, in position #1 (we can have up to 5 pipes open for reading) - - if ( role == role_ping_out ) - { - radio.openWritingPipe(pipes[0]); - radio.openReadingPipe(1,pipes[1]); - } - else - { - radio.openWritingPipe(pipes[1]); - radio.openReadingPipe(1,pipes[0]); - } - - // - // Start listening - // - - radio.startListening(); - - // - // Dump the configuration of the rf unit for debugging - // - - radio.printDetails(); -} - -void loop(void) -{ - // - // Ping out role. Repeatedly send the current time - // - - if (role == role_ping_out) - { - // First, stop listening so we can talk. - radio.stopListening(); - - // Take the time, and send it. This will block until complete - unsigned long time = millis(); - printf("Now sending %lu...",time); - bool ok = radio.write( &time, sizeof(unsigned long) ); - - if (ok) - printf("ok..."); - else - printf("failed.\n\r"); - - // Now, continue listening - radio.startListening(); - - // Wait here until we get a response, or timeout (250ms) - unsigned long started_waiting_at = millis(); - bool timeout = false; - while ( ! radio.available() && ! timeout ) - if (millis() - started_waiting_at > 200 ) - timeout = true; - - // Describe the results - if ( timeout ) - { - printf("Failed, response timed out.\n\r"); - } - else - { - // Grab the response, compare, and send to debugging spew - unsigned long got_time; - radio.read( &got_time, sizeof(unsigned long) ); - - // Spew it - printf("Got response %lu, round-trip delay: %lu\n\r",got_time,millis()-got_time); - } - - // Try again 1s later - delay(1000); - } - - // - // Pong back role. Receive each packet, dump it out, and send it back - // - - if ( role == role_pong_back ) - { - // if there is data ready - if ( radio.available() ) - { - // Dump the payloads until we've gotten everything - unsigned long got_time; - bool done = false; - while (!done) - { - // Fetch the payload, and see if this was the last one. - done = radio.read( &got_time, sizeof(unsigned long) ); - - // Spew it - printf("Got payload %lu...",got_time); - - // Delay just a little bit to let the other unit - // make the transition to receiver - delay(20); - } - - // First, stop listening so we can talk - radio.stopListening(); - - // Send the final one back. - radio.write( &got_time, sizeof(unsigned long) ); - printf("Sent response.\n\r"); - - // Now, resume listening so we catch the next packets. - radio.startListening(); - } - } -} -// vim:cin:ai:sts=2 sw=2 ft=cpp diff --git a/AVR/lib/RF24/examples/pingpair/printf.h b/AVR/lib/RF24/examples/pingpair/printf.h deleted file mode 100644 index b2efd56..0000000 --- a/AVR/lib/RF24/examples/pingpair/printf.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - Copyright (C) 2011 J. Coliz - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - version 2 as published by the Free Software Foundation. - */ - -/** - * @file printf.h - * - * Setup necessary to direct stdout to the Arduino Serial library, which - * enables 'printf' - */ - -#ifndef __PRINTF_H__ -#define __PRINTF_H__ - -#ifdef ARDUINO - -int serial_putc( char c, FILE * ) -{ - Serial.write( c ); - - return c; -} - -void printf_begin(void) -{ - fdevopen( &serial_putc, 0 ); -} - -#else -#error This example is only for use on Arduino. -#endif // ARDUINO - -#endif // __PRINTF_H__ diff --git a/AVR/lib/RF24/examples/pingpair_dyn/Jamfile b/AVR/lib/RF24/examples/pingpair_dyn/Jamfile deleted file mode 100644 index 901f8da..0000000 --- a/AVR/lib/RF24/examples/pingpair_dyn/Jamfile +++ /dev/null @@ -1,206 +0,0 @@ -PROJECT_NAME = $(PWD:B) ; -PROJECT_DIR = . ; -PROJECT_LIBS = SPI RF24 ; - -OUT_DIR = ojam ; -F_CPU = 16000000 ; -MCU = atmega328p ; -PORTS = /dev/tty.usbserial-A600eHIs /dev/tty.usbserial-A40081RP /dev/tty.usbserial-A9007LmI ; - -UPLOAD_RATE = 57600 ; -AVRDUDE_PROTOCOL = stk500v1 ; -COM = 33 ; - -# Host-specific overrides for locations -if $(OS) = MACOSX -{ -ARDUINO_VERSION = 22 ; -OLD_DIR = /opt/arduino-0021 ; -AVR_TOOLS_PATH = $(OLD_DIR)/hardware/tools/avr/bin ; -AVRDUDECONFIG_PATH = $(OLD_DIR)/hardware/tools/avr/etc ; -ARDUINO_DIR = /opt/Arduino ; -ARDUINO_AVR = /usr/lib/avr/include ; -} - -# Where is everything? -ARDUINO_VERSION ?= 22 ; -AVR_TOOLS_PATH ?= /usr/bin ; -ARDUINO_DIR ?= /opt/arduino-00$(ARDUINO_VERSION) ; -ARDUINO_AVR ?= $(ARDUINO_DIR)/hardware/tools/avr/avr/include/avr ; -AVRDUDECONFIG_PATH ?= $(ARDUINO_DIR)/hardware/tools ; -ARDUINO_CORE = $(ARDUINO_DIR)/hardware/arduino/cores/arduino ; -ARDUINO_LIB = $(ARDUINO_DIR)/libraries ; -SKETCH_LIB = $(HOME)/Source/Arduino/libraries ; -AVR_CC = $(AVR_TOOLS_PATH)/avr-gcc ; -AVR_CXX = $(AVR_TOOLS_PATH)/avr-g++ ; -AVR_LD = $(AVR_TOOLS_PATH)/avr-gcc ; -AVR_OBJCOPY = $(AVR_TOOLS_PATH)/avr-objcopy ; -AVRDUDE = $(AVR_TOOLS_PATH)/avrdude ; - -DEFINES = F_CPU=$(F_CPU)L ARDUINO=$(ARDUINO_VERSION) VERSION_H ; -CTUNING = -ffunction-sections -fdata-sections ; -CXXTUNING = -fno-exceptions -fno-strict-aliasing ; -CFLAGS = -Os -Wall -Wextra -mmcu=$(MCU) $(CTUNING) ; -CXXFLAGS = $(CFLAGS) $(CXXTUNING) ; -LDFLAGS = -Os -lm -Wl,--gc-sections -mmcu=atmega328p ; - -# Search everywhere for headers -HDRS = $(PROJECT_DIR) $(ARDUINO_AVR) $(ARDUINO_CORE) [ GLOB $(ARDUINO_LIB) $(SKETCH_LIB) : [^.]* ] ; - -# Grab everything from the core directory -CORE_MODULES = [ GLOB $(ARDUINO_CORE) : *.c *.cpp ] ; - -# Grab everything from libraries. To avoid this "grab everything" behaviour, you -# can specify specific modules to pick up in PROJECT_MODULES -LIB_MODULES = [ GLOB $(ARDUINO_LIB)/$(PROJECT_LIBS) $(SKETCH_LIB)/$(PROJECT_LIBS) : *.cpp ] ; - -# In addition to explicitly-specified program modules, pick up anything from the current -# dir. -PROJECT_MODULES += [ GLOB $(PROJECT_DIR) : *.c *.cpp *.pde ] ; - -# Shortcut for the out files -OUT = $(OUT_DIR)/$(PROJECT_NAME) ; - -# AvrDude setup -AVRDUDE_FLAGS = -V -F -D -C $(AVRDUDECONFIG_PATH)/avrdude.conf -p $(MCU) -c $(AVRDUDE_PROTOCOL) -b $(UPLOAD_RATE) ; - -rule GitVersion -{ - Always $(<) ; - Depends all : $(<) ; -} - -actions GitVersion -{ - echo "const char program_version[] = \"\\" > $(<) - git log -1 --pretty=format:%h >> $(<) - echo "\";" >> $(<) -} - -GitVersion version.h ; - -rule AvrCc -{ - Depends $(<) : $(>) ; - Depends $(<) : $(<:D) ; - Clean clean : $(<) ; - - CCHDRS on $(<) = [ on $(<) FIncludes $(HDRS) ] ; - CCDEFS on $(<) = [ on $(<) FDefines $(DEFINES) ] ; -} - -actions AvrCc -{ - $(AVR_CC) -c -o $(<) $(CCHDRS) $(CCDEFS) $(CFLAGS) $(>) -} - -rule AvrC++ -{ - Depends $(<) : $(>) ; - Depends $(<) : $(<:D) ; - Clean clean : $(<) ; - - CCHDRS on $(<) = [ on $(<) FIncludes $(HDRS) ] ; - CCDEFS on $(<) = [ on $(<) FDefines $(DEFINES) ] ; -} - -actions AvrC++ -{ - $(AVR_CXX) -c -o $(<) $(CCHDRS) $(CCDEFS) $(CXXFLAGS) $(>) -} - -rule Pde -{ - Depends $(<) : $(>) ; - Depends $(<) : $(<:D) ; - Clean clean : $(<) ; - -} - -actions Pde -{ - echo "#include " > $(<) - echo "#line 1 \"$(>)\"" >> $(<) - cat $(>) >> $(<) -} - -rule AvrPde -{ - local _CPP = $(OUT_DIR)/$(_I:B).cpp ; - Pde $(_CPP) : $(>) ; - AvrC++ $(<) : $(_CPP) ; -} - -rule AvrObject -{ - switch $(>:S) - { - case .c : AvrCc $(<) : $(>) ; - case .cpp : AvrC++ $(<) : $(>) ; - case .pde : AvrPde $(<) : $(>) ; - } -} - -rule AvrObjects -{ - for _I in $(<) - { - AvrObject $(OUT_DIR)/$(_I:B).o : $(_I) ; - } -} - -rule AvrMainFromObjects -{ - Depends $(<) : $(>) ; - Depends $(<) : $(<:D) ; - MkDir $(<:D) ; - Depends all : $(<) ; - Clean clean : $(<) ; -} - -actions AvrMainFromObjects -{ - $(AVR_LD) $(LDFLAGS) -o $(<) $(>) -} - -rule AvrMain -{ - AvrMainFromObjects $(<) : $(OUT_DIR)/$(>:B).o ; - AvrObjects $(>) ; -} - -rule AvrHex -{ - Depends $(<) : $(>) ; - Depends $(<) : $(<:D) ; - Depends hex : $(<) ; - Clean clean : $(<) ; -} - -actions AvrHex -{ - $(AVR_OBJCOPY) -O ihex -R .eeprom $(>) $(<) -} - -rule AvrUpload -{ - Depends $(1) : $(2) ; - Depends $(2) : $(3) ; - NotFile $(1) ; - Always $(1) ; - Always $(2) ; - AvrUploadAction $(2) : $(3) ; -} - -actions AvrUploadAction -{ - $(AVRDUDE) $(AVRDUDE_FLAGS) -P $(<) $(AVRDUDE_WRITE_FLASH) -U flash:w:$(>):i -} - -AvrMain $(OUT).elf : $(CORE_MODULES) $(LIB_MODULES) $(PROJECT_MODULES) ; -AvrHex $(OUT).hex : $(OUT).elf ; - -AvrUpload p6 : /dev/tty.usbserial-A600eHIs : $(OUT).hex ; -AvrUpload p4 : /dev/tty.usbserial-A40081RP : $(OUT).hex ; -AvrUpload p9 : /dev/tty.usbserial-A9007LmI : $(OUT).hex ; - diff --git a/AVR/lib/RF24/examples/pingpair_dyn/pingpair_dyn.pde b/AVR/lib/RF24/examples/pingpair_dyn/pingpair_dyn.pde deleted file mode 100644 index 7108f3b..0000000 --- a/AVR/lib/RF24/examples/pingpair_dyn/pingpair_dyn.pde +++ /dev/null @@ -1,232 +0,0 @@ -/* - Copyright (C) 2011 J. Coliz - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - version 2 as published by the Free Software Foundation. - */ - -/** - * Example using Dynamic Payloads - * - * This is an example of how to use payloads of a varying (dynamic) size. - */ - -#include -#include "nRF24L01.h" -#include "RF24.h" -#include "printf.h" - -// -// Hardware configuration -// - -// Set up nRF24L01 radio on SPI bus plus pins 9 & 10 - -RF24 radio(9,10); - -// sets the role of this unit in hardware. Connect to GND to be the 'pong' receiver -// Leave open to be the 'ping' transmitter -const int role_pin = 7; - -// -// Topology -// - -// Radio pipe addresses for the 2 nodes to communicate. -const uint64_t pipes[2] = { 0xF0F0F0F0E1LL, 0xF0F0F0F0D2LL }; - -// -// Role management -// -// Set up role. This sketch uses the same software for all the nodes -// in this system. Doing so greatly simplifies testing. The hardware itself specifies -// which node it is. -// -// This is done through the role_pin -// - -// The various roles supported by this sketch -typedef enum { role_ping_out = 1, role_pong_back } role_e; - -// The debug-friendly names of those roles -const char* role_friendly_name[] = { "invalid", "Ping out", "Pong back"}; - -// The role of the current running sketch -role_e role; - -// -// Payload -// - -const int min_payload_size = 4; -const int max_payload_size = 32; -const int payload_size_increments_by = 2; -int next_payload_size = min_payload_size; - -char receive_payload[max_payload_size+1]; // +1 to allow room for a terminating NULL char - -void setup(void) -{ - // - // Role - // - - // set up the role pin - pinMode(role_pin, INPUT); - digitalWrite(role_pin,HIGH); - delay(20); // Just to get a solid reading on the role pin - - // read the address pin, establish our role - if ( digitalRead(role_pin) ) - role = role_ping_out; - else - role = role_pong_back; - - // - // Print preamble - // - - Serial.begin(57600); - printf_begin(); - printf("\n\rRF24/examples/pingpair_dyn/\n\r"); - printf("ROLE: %s\n\r",role_friendly_name[role]); - - // - // Setup and configure rf radio - // - - radio.begin(); - - // enable dynamic payloads - radio.enableDynamicPayloads(); - - // optionally, increase the delay between retries & # of retries - radio.setRetries(15,15); - - // - // Open pipes to other nodes for communication - // - - // This simple sketch opens two pipes for these two nodes to communicate - // back and forth. - // Open 'our' pipe for writing - // Open the 'other' pipe for reading, in position #1 (we can have up to 5 pipes open for reading) - - if ( role == role_ping_out ) - { - radio.openWritingPipe(pipes[0]); - radio.openReadingPipe(1,pipes[1]); - } - else - { - radio.openWritingPipe(pipes[1]); - radio.openReadingPipe(1,pipes[0]); - } - - // - // Start listening - // - - radio.startListening(); - - // - // Dump the configuration of the rf unit for debugging - // - - radio.printDetails(); -} - -void loop(void) -{ - // - // Ping out role. Repeatedly send the current time - // - - if (role == role_ping_out) - { - // The payload will always be the same, what will change is how much of it we send. - static char send_payload[] = "ABCDEFGHIJKLMNOPQRSTUVWXYZ789012"; - - // First, stop listening so we can talk. - radio.stopListening(); - - // Take the time, and send it. This will block until complete - printf("Now sending length %i...",next_payload_size); - radio.write( send_payload, next_payload_size ); - - // Now, continue listening - radio.startListening(); - - // Wait here until we get a response, or timeout - unsigned long started_waiting_at = millis(); - bool timeout = false; - while ( ! radio.available() && ! timeout ) - if (millis() - started_waiting_at > 500 ) - timeout = true; - - // Describe the results - if ( timeout ) - { - printf("Failed, response timed out.\n\r"); - } - else - { - // Grab the response, compare, and send to debugging spew - uint8_t len = radio.getDynamicPayloadSize(); - radio.read( receive_payload, len ); - - // Put a zero at the end for easy printing - receive_payload[len] = 0; - - // Spew it - printf("Got response size=%i value=%s\n\r",len,receive_payload); - } - - // Update size for next time. - next_payload_size += payload_size_increments_by; - if ( next_payload_size > max_payload_size ) - next_payload_size = min_payload_size; - - // Try again 1s later - delay(1000); - } - - // - // Pong back role. Receive each packet, dump it out, and send it back - // - - if ( role == role_pong_back ) - { - // if there is data ready - if ( radio.available() ) - { - // Dump the payloads until we've gotten everything - uint8_t len; - bool done = false; - while (!done) - { - // Fetch the payload, and see if this was the last one. - len = radio.getDynamicPayloadSize(); - done = radio.read( receive_payload, len ); - - // Put a zero at the end for easy printing - receive_payload[len] = 0; - - // Spew it - printf("Got payload size=%i value=%s\n\r",len,receive_payload); - } - - // First, stop listening so we can talk - radio.stopListening(); - - // Send the final one back. - radio.write( receive_payload, len ); - printf("Sent response.\n\r"); - - // Now, resume listening so we catch the next packets. - radio.startListening(); - } - } -} -// vim:cin:ai:sts=2 sw=2 ft=cpp diff --git a/AVR/lib/RF24/examples/pingpair_dyn/printf.h b/AVR/lib/RF24/examples/pingpair_dyn/printf.h deleted file mode 100644 index b2efd56..0000000 --- a/AVR/lib/RF24/examples/pingpair_dyn/printf.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - Copyright (C) 2011 J. Coliz - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - version 2 as published by the Free Software Foundation. - */ - -/** - * @file printf.h - * - * Setup necessary to direct stdout to the Arduino Serial library, which - * enables 'printf' - */ - -#ifndef __PRINTF_H__ -#define __PRINTF_H__ - -#ifdef ARDUINO - -int serial_putc( char c, FILE * ) -{ - Serial.write( c ); - - return c; -} - -void printf_begin(void) -{ - fdevopen( &serial_putc, 0 ); -} - -#else -#error This example is only for use on Arduino. -#endif // ARDUINO - -#endif // __PRINTF_H__ diff --git a/AVR/lib/RF24/examples/pingpair_irq/Jamfile b/AVR/lib/RF24/examples/pingpair_irq/Jamfile deleted file mode 100644 index 18244ec..0000000 --- a/AVR/lib/RF24/examples/pingpair_irq/Jamfile +++ /dev/null @@ -1,219 +0,0 @@ -# (1) Project Information - -PROJECT_LIBS = SPI RF24 ; -PROJECT_DIRS = $(PWD) ; - -# (2) Board Information - -UPLOAD_PROTOCOL ?= arduino ; -UPLOAD_SPEED ?= 115200 ; -MCU ?= atmega328p ; -F_CPU ?= 16000000 ; -CORE ?= arduino ; -VARIANT ?= standard ; -ARDUINO_VERSION ?= 100 ; - -# (3) USB Ports - -PORTS = p4 p6 p9 u0 u1 u2 ; -PORT_p6 = /dev/tty.usbserial-A600eHIs ; -PORT_p4 = /dev/tty.usbserial-A40081RP ; -PORT_p9 = /dev/tty.usbserial-A9007LmI ; -PORT_u0 = /dev/ttyUSB0 ; -PORT_u1 = /dev/ttyUSB1 ; -PORT_u2 = /dev/ttyUSB2 ; - -# (4) Location of AVR tools -# -# This configuration assumes using avr-tools that were obtained separate from the Arduino -# distribution. - -if $(OS) = MACOSX -{ - AVR_BIN ?= /usr/local/avrtools/bin ; - AVR_ETC = /usr/local/avrtools/etc ; - AVR_INCLUDE = /usr/local/avrtools/include ; -} -else -{ - AVR_BIN ?= /usr/bin ; - AVR_INCLUDE = /usr/lib/avr/include ; - AVR_ETC = /etc ; -} - -# (5) Directories where Arduino core and libraries are located - -ARDUINO_DIR ?= /opt/Arduino ; -ARDUINO_CORE = $(ARDUINO_DIR)/hardware/arduino/cores/$(CORE) $(ARDUINO_DIR)/hardware/arduino/variants/$(VARIANT) ; -ARDUINO_LIB = $(ARDUINO_DIR)/libraries ; -SKETCH_LIB = $(HOME)/Source/Arduino/libraries ; - -# -# -------------------------------------------------- -# Below this line usually never needs to be modified -# - -# Tool locations - -CC = $(AVR_BIN)/avr-gcc ; -C++ = $(AVR_BIN)/avr-g++ ; -LINK = $(AVR_BIN)/avr-gcc ; -AR = $(AVR_BIN)/avr-ar rcs ; -RANLIB = ; -OBJCOPY = $(AVR_BIN)/avr-objcopy ; -AVRDUDE ?= $(AVR_BIN)/avrdude ; - -# Flags - -DEFINES += F_CPU=$(F_CPU)L ARDUINO=$(ARDUINO_VERSION) VERSION_H ; -OPTIM = -Os ; -CCFLAGS = -Wall -Wextra -Wno-strict-aliasing -mmcu=$(MCU) -ffunction-sections -fdata-sections ; -C++FLAGS = $(CCFLAGS) -fno-exceptions -fno-strict-aliasing ; -LINKFLAGS = $(OPTIM) -lm -Wl,--gc-sections -mmcu=$(MCU) ; -AVRDUDEFLAGS = -V -F -D -C $(AVR_ETC)/avrdude.conf -p $(MCU) -c $(UPLOAD_PROTOCOL) -b $(UPLOAD_SPEED) ; - -# Search everywhere for headers - -HDRS = $(PROJECT_DIRS) $(AVR_INCLUDE) $(ARDUINO_CORE) $(ARDUINO_LIB)/$(PROJECT_LIBS) $(ARDUINO_LIB)/$(PROJECT_LIBS)/utility $(SKETCH_LIB)/$(PROJECT_LIBS) ; - -# Output locations - -LOCATE_TARGET = $(F_CPU) ; -LOCATE_SOURCE = $(F_CPU) ; - -# -# Custom rules -# - -rule GitVersion -{ - Always $(<) ; - Depends all : $(<) ; -} - -actions GitVersion -{ - echo "const char program_version[] = \"\\" > $(<) - git log -1 --pretty=format:%h >> $(<) - echo "\";" >> $(<) -} - -GitVersion version.h ; - -rule Pde -{ - Depends $(<) : $(>) ; - MakeLocate $(<) : $(LOCATE_SOURCE) ; - Clean clean : $(<) ; -} - -if ( $(ARDUINO_VERSION) < 100 ) -{ - ARDUINO_H = WProgram.h ; -} -else -{ - ARDUINO_H = Arduino.h ; -} - -actions Pde -{ - echo "#include <$(ARDUINO_H)>" > $(<) - echo "#line 1 \"$(>)\"" >> $(<) - cat $(>) >> $(<) -} - -rule C++Pde -{ - local _CPP = $(>:B).cpp ; - Pde $(_CPP) : $(>) ; - C++ $(<) : $(_CPP) ; -} - -rule UserObject -{ - switch $(>:S) - { - case .ino : C++Pde $(<) : $(>) ; - case .pde : C++Pde $(<) : $(>) ; - } -} - -rule Objects -{ - local _i ; - - for _i in [ FGristFiles $(<) ] - { - local _b = $(_i:B)$(SUFOBJ) ; - local _o = $(_b:G=$(SOURCE_GRIST:E)) ; - Object $(_o) : $(_i) ; - Depends obj : $(_o) ; - } -} - -rule Library -{ - LibraryFromObjects $(<) : $(>:B)$(SUFOBJ) ; - Objects $(>) ; -} - -rule Main -{ - MainFromObjects $(<) : $(>:B)$(SUFOBJ) ; - Objects $(>) ; -} - -rule Hex -{ - Depends $(<) : $(>) ; - MakeLocate $(<) : $(LOCATE_TARGET) ; - Depends hex : $(<) ; - Clean clean : $(<) ; -} - -actions Hex -{ - $(OBJCOPY) -O ihex -R .eeprom $(>) $(<) -} - -rule Upload -{ - Depends $(1) : $(2) ; - Depends $(2) : $(3) ; - NotFile $(1) ; - Always $(1) ; - Always $(2) ; - UploadAction $(2) : $(3) ; -} - -actions UploadAction -{ - $(AVRDUDE) $(AVRDUDEFLAGS) -P $(<) $(AVRDUDE_WRITE_FLASH) -U flash:w:$(>):i -} - -rule Arduino -{ - LINKFLAGS on $(<) = $(LINKFLAGS) -Wl,-Map=$(LOCATE_TARGET)/$(<:B).map ; - Main $(<) : $(>) ; - LinkLibraries $(<) : core libs ; - Hex $(<:B).hex : $(<) ; - for _p in $(PORTS) - { - Upload $(_p) : $(PORT_$(_p)) : $(<:B).hex ; - } -} - -# -# Targets -# - -# Grab everything from the core directory -Library core : [ GLOB $(ARDUINO_CORE) : *.c *.cpp ] ; - -# Grab everything from libraries. To avoid this "grab everything" behaviour, you -# can specify specific modules to pick up in PROJECT_MODULES -Library libs : [ GLOB $(ARDUINO_LIB)/$(PROJECT_LIBS) $(ARDUINO_LIB)/$(PROJECT_LIBS)/utility $(SKETCH_LIB)/$(PROJECT_LIBS) : *.cpp *.c ] ; - -# Main output executable -Arduino $(PWD:B).elf : $(PROJECT_MODULES) [ GLOB $(PROJECT_DIRS) : *.c *.cpp *.pde *.ino ] ; diff --git a/AVR/lib/RF24/examples/pingpair_irq/pingpair_irq.pde b/AVR/lib/RF24/examples/pingpair_irq/pingpair_irq.pde deleted file mode 100644 index 47084a1..0000000 --- a/AVR/lib/RF24/examples/pingpair_irq/pingpair_irq.pde +++ /dev/null @@ -1,216 +0,0 @@ -/* - Copyright (C) 2011 J. Coliz - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - version 2 as published by the Free Software Foundation. - */ - -/** - * Example of using interrupts - * - * This is an example of how to user interrupts to interact with the radio. - * It builds on the pingpair_pl example, and uses ack payloads. - */ - -#include -#include "nRF24L01.h" -#include "RF24.h" -#include "printf.h" - -// -// Hardware configuration -// - -// Set up nRF24L01 radio on SPI bus plus pins 9 & 10 - -RF24 radio(8,9); - -// sets the role of this unit in hardware. Connect to GND to be the 'pong' receiver -// Leave open to be the 'ping' transmitter -const short role_pin = 7; - -// -// Topology -// - -// Single radio pipe address for the 2 nodes to communicate. -const uint64_t pipe = 0xE8E8F0F0E1LL; - -// -// Role management -// -// Set up role. This sketch uses the same software for all the nodes in this -// system. Doing so greatly simplifies testing. The hardware itself specifies -// which node it is. -// -// This is done through the role_pin -// - -// The various roles supported by this sketch -typedef enum { role_sender = 1, role_receiver } role_e; - -// The debug-friendly names of those roles -const char* role_friendly_name[] = { "invalid", "Sender", "Receiver"}; - -// The role of the current running sketch -role_e role; - -// Interrupt handler, check the radio because we got an IRQ -void check_radio(void); - -void setup(void) -{ - // - // Role - // - - // set up the role pin - pinMode(role_pin, INPUT); - digitalWrite(role_pin,HIGH); - delay(20); // Just to get a solid reading on the role pin - - // read the address pin, establish our role - if ( digitalRead(role_pin) ) - role = role_sender; - else - role = role_receiver; - - // - // Print preamble - // - - Serial.begin(57600); - printf_begin(); - printf("\n\rRF24/examples/pingpair_irq/\n\r"); - printf("ROLE: %s\n\r",role_friendly_name[role]); - - // - // Setup and configure rf radio - // - - radio.begin(); - - // We will be using the Ack Payload feature, so please enable it - radio.enableAckPayload(); - - // - // Open pipes to other nodes for communication - // - - // This simple sketch opens a single pipe for these two nodes to communicate - // back and forth. One listens on it, the other talks to it. - - if ( role == role_sender ) - { - radio.openWritingPipe(pipe); - } - else - { - radio.openReadingPipe(1,pipe); - } - - // - // Start listening - // - - if ( role == role_receiver ) - radio.startListening(); - - // - // Dump the configuration of the rf unit for debugging - // - - radio.printDetails(); - - // - // Attach interrupt handler to interrupt #0 (using pin 2) - // on BOTH the sender and receiver - // - - attachInterrupt(0, check_radio, FALLING); -} - -static uint32_t message_count = 0; - -void loop(void) -{ - // - // Sender role. Repeatedly send the current time - // - - if (role == role_sender) - { - // Take the time, and send it. - unsigned long time = millis(); - printf("Now sending %lu\n\r",time); - radio.startWrite( &time, sizeof(unsigned long) ); - - // Try again soon - delay(2000); - } - - // - // Receiver role: Does nothing! All the work is in IRQ - // - -} - -void check_radio(void) -{ - // What happened? - bool tx,fail,rx; - radio.whatHappened(tx,fail,rx); - - // Have we successfully transmitted? - if ( tx ) - { - if ( role == role_sender ) - printf("Send:OK\n\r"); - - if ( role == role_receiver ) - printf("Ack Payload:Sent\n\r"); - } - - // Have we failed to transmit? - if ( fail ) - { - if ( role == role_sender ) - printf("Send:Failed\n\r"); - - if ( role == role_receiver ) - printf("Ack Payload:Failed\n\r"); - } - - // Transmitter can power down for now, because - // the transmission is done. - if ( ( tx || fail ) && ( role == role_sender ) ) - radio.powerDown(); - - // Did we receive a message? - if ( rx ) - { - // If we're the sender, we've received an ack payload - if ( role == role_sender ) - { - radio.read(&message_count,sizeof(message_count)); - printf("Ack:%lu\n\r",message_count); - } - - // If we're the receiver, we've received a time message - if ( role == role_receiver ) - { - // Get this payload and dump it - static unsigned long got_time; - radio.read( &got_time, sizeof(got_time) ); - printf("Got payload %lu\n\r",got_time); - - // Add an ack packet for the next time around. This is a simple - // packet counter - radio.writeAckPayload( 1, &message_count, sizeof(message_count) ); - ++message_count; - } - } -} - -// vim:ai:cin:sts=2 sw=2 ft=cpp diff --git a/AVR/lib/RF24/examples/pingpair_irq/printf.h b/AVR/lib/RF24/examples/pingpair_irq/printf.h deleted file mode 100644 index b2efd56..0000000 --- a/AVR/lib/RF24/examples/pingpair_irq/printf.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - Copyright (C) 2011 J. Coliz - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - version 2 as published by the Free Software Foundation. - */ - -/** - * @file printf.h - * - * Setup necessary to direct stdout to the Arduino Serial library, which - * enables 'printf' - */ - -#ifndef __PRINTF_H__ -#define __PRINTF_H__ - -#ifdef ARDUINO - -int serial_putc( char c, FILE * ) -{ - Serial.write( c ); - - return c; -} - -void printf_begin(void) -{ - fdevopen( &serial_putc, 0 ); -} - -#else -#error This example is only for use on Arduino. -#endif // ARDUINO - -#endif // __PRINTF_H__ diff --git a/AVR/lib/RF24/examples/pingpair_maple/Jamfile b/AVR/lib/RF24/examples/pingpair_maple/Jamfile deleted file mode 100644 index 798096c..0000000 --- a/AVR/lib/RF24/examples/pingpair_maple/Jamfile +++ /dev/null @@ -1,182 +0,0 @@ -MCU = cortex-m3 ; -CHIP = STM32F103ZE ; -BOARD = maple_native ; - -#CHIP = at91sam3u4 ; -#BOARD = sam3u-ek ; - -if ! $(TOOLSET) -{ - TOOLSET = devkit ; - Echo "Assuming TOOLSET=devkit" ; -} - -if $(TOOLSET) = yagarto -{ - TOOLS_PATH = ~/Source/yagarto-4.6.2/bin ; - TOOLS_ARCH = arm-none-eabi- ; -} -if $(TOOLSET) = yagarto-install -{ - TOOLS_PATH = ~/Source/yagarto/install/bin ; - TOOLS_ARCH = arm-none-eabi- ; -} -else if $(TOOLSET) = devkit -{ - TOOLS_PATH = /opt/devkitARM/bin ; - TOOLS_ARCH = arm-eabi- ; -} -else if $(TOOLSET) = maple -{ - TOOLS_PATH = /opt/Maple/Resources/Java/hardware/tools/arm/bin ; - TOOLS_ARCH = arm-none-eabi- ; -} -else if $(TOOLSET) = ports -{ - TOOLS_PATH = /opt/local/bin ; - TOOLS_ARCH = arm-none-eabi- ; -} - -CC = $(TOOLS_PATH)/$(TOOLS_ARCH)gcc ; -C++ = $(TOOLS_PATH)/$(TOOLS_ARCH)g++ ; -AS = $(TOOLS_PATH)/$(TOOLS_ARCH)gcc -c ; -LINK = $(TOOLS_PATH)/$(TOOLS_ARCH)g++ ; -OBJCOPY = $(TOOLS_PATH)/$(TOOLS_ARCH)objcopy ; -DFU = dfu-util ; - -DEFINES += VECT_TAB_FLASH BOARD_$(BOARD) MCU_$(CHIP) ERROR_LED_PORT=GPIOC ERROR_LED_PIN=15 STM32_HIGH_DENSITY MAPLE_IDE ; -OPTIM = -Os ; -MFLAGS = cpu=$(MCU) thumb arch=armv7-m ; -CCFLAGS = -Wall -m$(MFLAGS) -g -nostdlib -ffunction-sections -fdata-sections -Wl,--gc-sections ; -C++FLAGS = $(CCFLAGS) -fno-rtti -fno-exceptions ; -LINKFLAGS += -m$(MFLAGS) -Xlinker --gc-sections ; -DFUFLAGS = -a1 -d 0x1eaf:0x0003 -R ; - -MAPLE_DIR = $(HOME)/Source/SAM3U/libmaple ; -MAPLE_LIBS = Servo LiquidCrystal Wire FreeRTOS ; -MAPLE_SUBDIRS = wirish wirish/comm wirish/boards libmaple libmaple/usb libmaple/usb/usb_lib ; - -SKETCH_DIR = $(HOME)/Source/Arduino ; -SKETCH_LIBS = RF24 ; - -MODULE_DIRS = . $(MAPLE_DIR)/$(MAPLE_SUBDIRS) $(MAPLE_DIR)/libraries/$(MAPLE_LIBS) $(SKETCH_DIR)/libraries/$(SKETCH_LIBS) ; -HDRS = $(MODULE_DIRS) ; -LOCATE_TARGET = out/$(TOOLSET) ; -LOCATE_SOURCE = $(LOCATE_TARGET) ; - -rule Pde -{ - Depends $(<) : $(>) ; - MakeLocate $(<) : $(LOCATE_SOURCE) ; - Clean clean : $(<) ; -} - -if ( $(ARDUINO_VERSION) < 100 ) -{ - ARDUINO_H = WProgram.h ; -} -else -{ - ARDUINO_H = Arduino.h ; -} - -actions Pde -{ - echo "#include <$(ARDUINO_H)>" > $(<) - echo "#line 1 \"$(>)\"" >> $(<) - cat $(>) >> $(<) -} - -rule C++Pde -{ - local _CPP = $(>:B).cpp ; - Pde $(_CPP) : $(>) ; - C++ $(<) : $(_CPP) ; -} - -rule Hex -{ - Depends $(<) : $(>) ; - MakeLocate $(<) : $(LOCATE_TARGET) ; - Depends hex : $(<) ; - Clean clean : $(<) ; -} - -actions Hex -{ - $(OBJCOPY) -O ihex $(>) $(<) -} - -rule Binary -{ - Depends $(<) : $(>) ; - MakeLocate $(<) : $(LOCATE_TARGET) ; - Depends binary : $(<) ; - Clean clean : $(<) ; -} - -actions Binary -{ - $(OBJCOPY) -O binary $(>) $(<) -} - -rule UserObject -{ - switch $(>:S) - { - case .S : As $(<) : $(>) ; - case .ino : C++Pde $(<) : $(>) ; - case .pde : C++Pde $(<) : $(>) ; - } -} - -rule Upload -{ - Depends up : $(<) ; - NotFile up ; - Always $(<) ; - Always up ; -} - -actions Upload -{ - $(DFU) $(DFUFLAGS) -D $(<) -} - -# Override base objects rule, so all output can go in the output dir -rule Objects -{ - local _i ; - - for _i in [ FGristFiles $(<) ] - { - local _b = $(_i:B)$(SUFOBJ) ; - local _o = $(_b:G=$(SOURCE_GRIST:E)) ; - Object $(_o) : $(_i) ; - Depends obj : $(_o) ; - } -} - -# Override base main rule, so all output can go in the output dir -rule Main -{ - MainFromObjects $(<) : $(>:B)$(SUFOBJ) ; - Objects $(>) ; -} - -# Modules -MODULES = [ GLOB $(MODULE_DIRS) : *.pde *.c *.cpp *.S ] ; - -# Main output executable -MAIN = $(PWD:B).elf ; - -# Linker script -LINK_DIR = $(MAPLE_DIR)/support/ld ; -LINKSCRIPT = $(LINK_DIR)/$(BOARD)/flash.ld ; - -# Bring in the map and link script -LINKFLAGS += -Wl,-Map=$(LOCATE_TARGET)/$(MAIN:B).map -T$(LINKSCRIPT) -L$(LINK_DIR) ; - -Main $(MAIN) : $(MODULES) ; -Binary $(MAIN:B).bin : $(MAIN) ; -Upload $(MAIN:B).bin ; diff --git a/AVR/lib/RF24/examples/pingpair_maple/main.cpp b/AVR/lib/RF24/examples/pingpair_maple/main.cpp deleted file mode 100644 index b4f976d..0000000 --- a/AVR/lib/RF24/examples/pingpair_maple/main.cpp +++ /dev/null @@ -1,87 +0,0 @@ -#ifdef MAPLE_IDE - -#include -#include "wirish.h" - -extern void setup(void); -extern void loop(void); - -void board_start(const char* program_name) -{ - // Set up the LED to steady on - pinMode(BOARD_LED_PIN, OUTPUT); - digitalWrite(BOARD_LED_PIN, HIGH); - - // Setup the button as input - pinMode(BOARD_BUTTON_PIN, INPUT); - digitalWrite(BOARD_BUTTON_PIN, HIGH); - - SerialUSB.begin(); - SerialUSB.println("Press BUT"); - - // Wait for button press - while ( !isButtonPressed() ) - { - } - - SerialUSB.println("Welcome!"); - SerialUSB.println(program_name); - - int i = 11; - while (i--) - { - toggleLED(); - delay(50); - } -} - -/** - * Custom version of _write, which will print to the USB. - * In order to use it you MUST ADD __attribute__((weak)) - * to _write in libmaple/syscalls.c -*/ -extern "C" int _write (int file, char * ptr, int len) -{ - if ( (file != 1) && (file != 2) ) - return 0; - else - SerialUSB.write(ptr,len); - return len; -} - -/** - * Re-entrant version of _write. Yagarto and Devkit now use - * the re-entrant newlib, so these get called instead of the - * non_r versions. - */ -extern "C" int _write_r (void*, int file, char * ptr, int len) -{ - return _write( file, ptr, len); -} - -__attribute__((constructor)) __attribute__ ((weak)) void premain() -{ - init(); -} - -__attribute__((weak)) void setup(void) -{ - board_start("No program defined"); -} - -__attribute__((weak)) void loop(void) -{ -} - -__attribute__((weak)) int main(void) -{ - setup(); - - while (true) - { - loop(); - } - return 0; -} -#endif // ifdef MAPLE_IDE -// vim:cin:ai:sts=2 sw=2 ft=cpp diff --git a/AVR/lib/RF24/examples/pingpair_maple/pingpair_maple.pde b/AVR/lib/RF24/examples/pingpair_maple/pingpair_maple.pde deleted file mode 100644 index 2d3925b..0000000 --- a/AVR/lib/RF24/examples/pingpair_maple/pingpair_maple.pde +++ /dev/null @@ -1,242 +0,0 @@ -/* - Copyright (C) 2011 J. Coliz - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - version 2 as published by the Free Software Foundation. - */ - -/** - * Example RF Radio Ping Pair ... for Maple - * - * This is an example of how to use the RF24 class. Write this sketch to two different nodes, - * connect the role_pin to ground on one. The ping node sends the current time to the pong node, - * which responds by sending the value back. The ping node can then see how long the whole cycle - * took. - */ - -#include "WProgram.h" -#include -#include "nRF24L01.h" -#include "RF24.h" - -// -// Maple specific setup. Other than this section, the sketch is the same on Maple as on -// Arduino -// - -#ifdef MAPLE_IDE - -// External startup function -extern void board_start(const char* program_name); - -// Use SPI #2. -HardwareSPI SPI(2); - -#else -#define board_startup printf -#define toggleLED(x) (x) -#endif - -// -// Hardware configuration -// - -// Set up nRF24L01 radio on SPI bus plus pins 7 & 6 -// (This works for the Getting Started board plugged into the -// Maple Native backwards.) - -RF24 radio(7,6); - -// sets the role of this unit in hardware. Connect to GND to be the 'pong' receiver -// Leave open to be the 'ping' transmitter -const int role_pin = 10; - -// -// Topology -// - -// Radio pipe addresses for the 2 nodes to communicate. -const uint64_t pipes[2] = { 0xF0F0F0F0E1LL, 0xF0F0F0F0D2LL }; - -// -// Role management -// -// Set up role. This sketch uses the same software for all the nodes -// in this system. Doing so greatly simplifies testing. The hardware itself specifies -// which node it is. -// -// This is done through the role_pin -// - -// The various roles supported by this sketch -typedef enum { role_ping_out = 1, role_pong_back } role_e; - -// The debug-friendly names of those roles -const char* role_friendly_name[] = { "invalid", "Ping out", "Pong back"}; - -// The role of the current running sketch -role_e role; - -void setup(void) -{ - // - // Role - // - - // set up the role pin - pinMode(role_pin, INPUT); - digitalWrite(role_pin,HIGH); - delay(20); // Just to get a solid reading on the role pin - - // read the address pin, establish our role - if ( digitalRead(role_pin) ) - role = role_ping_out; - else - role = role_pong_back; - - // - // Print preamble - // - - board_start("\n\rRF24/examples/pingpair/\n\r"); - printf("ROLE: %s\n\r",role_friendly_name[role]); - - // - // Setup and configure rf radio - // - - radio.begin(); - - // optionally, increase the delay between retries & # of retries - radio.setRetries(15,15); - - // optionally, reduce the payload size. seems to - // improve reliability - radio.setPayloadSize(8); - - // - // Open pipes to other nodes for communication - // - - // This simple sketch opens two pipes for these two nodes to communicate - // back and forth. - // Open 'our' pipe for writing - // Open the 'other' pipe for reading, in position #1 (we can have up to 5 pipes open for reading) - - if ( role == role_ping_out ) - { - radio.openWritingPipe(pipes[0]); - radio.openReadingPipe(1,pipes[1]); - } - else - { - radio.openWritingPipe(pipes[1]); - radio.openReadingPipe(1,pipes[0]); - } - - // - // Start listening - // - - radio.startListening(); - - // - // Dump the configuration of the rf unit for debugging - // - - radio.printDetails(); -} - -void loop(void) -{ - // - // Ping out role. Repeatedly send the current time - // - - if (role == role_ping_out) - { - toggleLED(); - - // First, stop listening so we can talk. - radio.stopListening(); - - // Take the time, and send it. This will block until complete - unsigned long time = millis(); - printf("Now sending %lu...",time); - bool ok = radio.write( &time, sizeof(unsigned long) ); - - if (ok) - printf("ok...\r\n"); - else - printf("failed.\r\n"); - - // Now, continue listening - radio.startListening(); - - // Wait here until we get a response, or timeout (250ms) - unsigned long started_waiting_at = millis(); - bool timeout = false; - while ( ! radio.available() && ! timeout ) - if (millis() - started_waiting_at > 200 ) - timeout = true; - - // Describe the results - if ( timeout ) - { - printf("Failed, response timed out.\r\n"); - } - else - { - // Grab the response, compare, and send to debugging spew - unsigned long got_time; - radio.read( &got_time, sizeof(unsigned long) ); - - // Spew it - printf("Got response %lu, round-trip delay: %lu\r\n",got_time,millis()-got_time); - } - - toggleLED(); - - // Try again 1s later - delay(1000); - } - - // - // Pong back role. Receive each packet, dump it out, and send it back - // - - if ( role == role_pong_back ) - { - // if there is data ready - if ( radio.available() ) - { - // Dump the payloads until we've gotten everything - unsigned long got_time; - bool done = false; - while (!done) - { - // Fetch the payload, and see if this was the last one. - done = radio.read( &got_time, sizeof(unsigned long) ); - - // Spew it - printf("Got payload %lu...",got_time); - - // Delay just a little bit to let the other unit - // make the transition to receiver - delay(20); - } - - // First, stop listening so we can talk - radio.stopListening(); - - // Send the final one back. - radio.write( &got_time, sizeof(unsigned long) ); - printf("Sent response.\r\n"); - - // Now, resume listening so we catch the next packets. - radio.startListening(); - } - } -} -// vim:cin:ai:sts=2 sw=2 ft=cpp diff --git a/AVR/lib/RF24/examples/pingpair_pl/Jamfile b/AVR/lib/RF24/examples/pingpair_pl/Jamfile deleted file mode 100644 index 901f8da..0000000 --- a/AVR/lib/RF24/examples/pingpair_pl/Jamfile +++ /dev/null @@ -1,206 +0,0 @@ -PROJECT_NAME = $(PWD:B) ; -PROJECT_DIR = . ; -PROJECT_LIBS = SPI RF24 ; - -OUT_DIR = ojam ; -F_CPU = 16000000 ; -MCU = atmega328p ; -PORTS = /dev/tty.usbserial-A600eHIs /dev/tty.usbserial-A40081RP /dev/tty.usbserial-A9007LmI ; - -UPLOAD_RATE = 57600 ; -AVRDUDE_PROTOCOL = stk500v1 ; -COM = 33 ; - -# Host-specific overrides for locations -if $(OS) = MACOSX -{ -ARDUINO_VERSION = 22 ; -OLD_DIR = /opt/arduino-0021 ; -AVR_TOOLS_PATH = $(OLD_DIR)/hardware/tools/avr/bin ; -AVRDUDECONFIG_PATH = $(OLD_DIR)/hardware/tools/avr/etc ; -ARDUINO_DIR = /opt/Arduino ; -ARDUINO_AVR = /usr/lib/avr/include ; -} - -# Where is everything? -ARDUINO_VERSION ?= 22 ; -AVR_TOOLS_PATH ?= /usr/bin ; -ARDUINO_DIR ?= /opt/arduino-00$(ARDUINO_VERSION) ; -ARDUINO_AVR ?= $(ARDUINO_DIR)/hardware/tools/avr/avr/include/avr ; -AVRDUDECONFIG_PATH ?= $(ARDUINO_DIR)/hardware/tools ; -ARDUINO_CORE = $(ARDUINO_DIR)/hardware/arduino/cores/arduino ; -ARDUINO_LIB = $(ARDUINO_DIR)/libraries ; -SKETCH_LIB = $(HOME)/Source/Arduino/libraries ; -AVR_CC = $(AVR_TOOLS_PATH)/avr-gcc ; -AVR_CXX = $(AVR_TOOLS_PATH)/avr-g++ ; -AVR_LD = $(AVR_TOOLS_PATH)/avr-gcc ; -AVR_OBJCOPY = $(AVR_TOOLS_PATH)/avr-objcopy ; -AVRDUDE = $(AVR_TOOLS_PATH)/avrdude ; - -DEFINES = F_CPU=$(F_CPU)L ARDUINO=$(ARDUINO_VERSION) VERSION_H ; -CTUNING = -ffunction-sections -fdata-sections ; -CXXTUNING = -fno-exceptions -fno-strict-aliasing ; -CFLAGS = -Os -Wall -Wextra -mmcu=$(MCU) $(CTUNING) ; -CXXFLAGS = $(CFLAGS) $(CXXTUNING) ; -LDFLAGS = -Os -lm -Wl,--gc-sections -mmcu=atmega328p ; - -# Search everywhere for headers -HDRS = $(PROJECT_DIR) $(ARDUINO_AVR) $(ARDUINO_CORE) [ GLOB $(ARDUINO_LIB) $(SKETCH_LIB) : [^.]* ] ; - -# Grab everything from the core directory -CORE_MODULES = [ GLOB $(ARDUINO_CORE) : *.c *.cpp ] ; - -# Grab everything from libraries. To avoid this "grab everything" behaviour, you -# can specify specific modules to pick up in PROJECT_MODULES -LIB_MODULES = [ GLOB $(ARDUINO_LIB)/$(PROJECT_LIBS) $(SKETCH_LIB)/$(PROJECT_LIBS) : *.cpp ] ; - -# In addition to explicitly-specified program modules, pick up anything from the current -# dir. -PROJECT_MODULES += [ GLOB $(PROJECT_DIR) : *.c *.cpp *.pde ] ; - -# Shortcut for the out files -OUT = $(OUT_DIR)/$(PROJECT_NAME) ; - -# AvrDude setup -AVRDUDE_FLAGS = -V -F -D -C $(AVRDUDECONFIG_PATH)/avrdude.conf -p $(MCU) -c $(AVRDUDE_PROTOCOL) -b $(UPLOAD_RATE) ; - -rule GitVersion -{ - Always $(<) ; - Depends all : $(<) ; -} - -actions GitVersion -{ - echo "const char program_version[] = \"\\" > $(<) - git log -1 --pretty=format:%h >> $(<) - echo "\";" >> $(<) -} - -GitVersion version.h ; - -rule AvrCc -{ - Depends $(<) : $(>) ; - Depends $(<) : $(<:D) ; - Clean clean : $(<) ; - - CCHDRS on $(<) = [ on $(<) FIncludes $(HDRS) ] ; - CCDEFS on $(<) = [ on $(<) FDefines $(DEFINES) ] ; -} - -actions AvrCc -{ - $(AVR_CC) -c -o $(<) $(CCHDRS) $(CCDEFS) $(CFLAGS) $(>) -} - -rule AvrC++ -{ - Depends $(<) : $(>) ; - Depends $(<) : $(<:D) ; - Clean clean : $(<) ; - - CCHDRS on $(<) = [ on $(<) FIncludes $(HDRS) ] ; - CCDEFS on $(<) = [ on $(<) FDefines $(DEFINES) ] ; -} - -actions AvrC++ -{ - $(AVR_CXX) -c -o $(<) $(CCHDRS) $(CCDEFS) $(CXXFLAGS) $(>) -} - -rule Pde -{ - Depends $(<) : $(>) ; - Depends $(<) : $(<:D) ; - Clean clean : $(<) ; - -} - -actions Pde -{ - echo "#include " > $(<) - echo "#line 1 \"$(>)\"" >> $(<) - cat $(>) >> $(<) -} - -rule AvrPde -{ - local _CPP = $(OUT_DIR)/$(_I:B).cpp ; - Pde $(_CPP) : $(>) ; - AvrC++ $(<) : $(_CPP) ; -} - -rule AvrObject -{ - switch $(>:S) - { - case .c : AvrCc $(<) : $(>) ; - case .cpp : AvrC++ $(<) : $(>) ; - case .pde : AvrPde $(<) : $(>) ; - } -} - -rule AvrObjects -{ - for _I in $(<) - { - AvrObject $(OUT_DIR)/$(_I:B).o : $(_I) ; - } -} - -rule AvrMainFromObjects -{ - Depends $(<) : $(>) ; - Depends $(<) : $(<:D) ; - MkDir $(<:D) ; - Depends all : $(<) ; - Clean clean : $(<) ; -} - -actions AvrMainFromObjects -{ - $(AVR_LD) $(LDFLAGS) -o $(<) $(>) -} - -rule AvrMain -{ - AvrMainFromObjects $(<) : $(OUT_DIR)/$(>:B).o ; - AvrObjects $(>) ; -} - -rule AvrHex -{ - Depends $(<) : $(>) ; - Depends $(<) : $(<:D) ; - Depends hex : $(<) ; - Clean clean : $(<) ; -} - -actions AvrHex -{ - $(AVR_OBJCOPY) -O ihex -R .eeprom $(>) $(<) -} - -rule AvrUpload -{ - Depends $(1) : $(2) ; - Depends $(2) : $(3) ; - NotFile $(1) ; - Always $(1) ; - Always $(2) ; - AvrUploadAction $(2) : $(3) ; -} - -actions AvrUploadAction -{ - $(AVRDUDE) $(AVRDUDE_FLAGS) -P $(<) $(AVRDUDE_WRITE_FLASH) -U flash:w:$(>):i -} - -AvrMain $(OUT).elf : $(CORE_MODULES) $(LIB_MODULES) $(PROJECT_MODULES) ; -AvrHex $(OUT).hex : $(OUT).elf ; - -AvrUpload p6 : /dev/tty.usbserial-A600eHIs : $(OUT).hex ; -AvrUpload p4 : /dev/tty.usbserial-A40081RP : $(OUT).hex ; -AvrUpload p9 : /dev/tty.usbserial-A9007LmI : $(OUT).hex ; - diff --git a/AVR/lib/RF24/examples/pingpair_pl/pingpair_pl.pde b/AVR/lib/RF24/examples/pingpair_pl/pingpair_pl.pde deleted file mode 100644 index 70aed6e..0000000 --- a/AVR/lib/RF24/examples/pingpair_pl/pingpair_pl.pde +++ /dev/null @@ -1,180 +0,0 @@ -/* - Copyright (C) 2011 J. Coliz - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - version 2 as published by the Free Software Foundation. - */ - -/** - * Example of using Ack Payloads - * - * This is an example of how to do two-way communication without changing - * transmit/receive modes. Here, a payload is set to the transmitter within - * the Ack packet of each transmission. Note that the payload is set BEFORE - * the sender's message arrives. - */ - -#include -#include "nRF24L01.h" -#include "RF24.h" -#include "printf.h" - -// -// Hardware configuration -// - -// Set up nRF24L01 radio on SPI bus plus pins 9 & 10 - -RF24 radio(9,10); - -// sets the role of this unit in hardware. Connect to GND to be the 'pong' receiver -// Leave open to be the 'ping' transmitter -const short role_pin = 7; - -// -// Topology -// - -// Single radio pipe address for the 2 nodes to communicate. -const uint64_t pipe = 0xE8E8F0F0E1LL; - -// -// Role management -// -// Set up role. This sketch uses the same software for all the nodes in this -// system. Doing so greatly simplifies testing. The hardware itself specifies -// which node it is. -// -// This is done through the role_pin -// - -// The various roles supported by this sketch -typedef enum { role_sender = 1, role_receiver } role_e; - -// The debug-friendly names of those roles -const char* role_friendly_name[] = { "invalid", "Sender", "Receiver"}; - -// The role of the current running sketch -role_e role; - -void setup(void) -{ - // - // Role - // - - // set up the role pin - pinMode(role_pin, INPUT); - digitalWrite(role_pin,HIGH); - delay(20); // Just to get a solid reading on the role pin - - // read the address pin, establish our role - if ( digitalRead(role_pin) ) - role = role_sender; - else - role = role_receiver; - - // - // Print preamble - // - - Serial.begin(57600); - printf_begin(); - printf("\n\rRF24/examples/pingpair_pl/\n\r"); - printf("ROLE: %s\n\r",role_friendly_name[role]); - - // - // Setup and configure rf radio - // - - radio.begin(); - - // We will be using the Ack Payload feature, so please enable it - radio.enableAckPayload(); - - // - // Open pipes to other nodes for communication - // - - // This simple sketch opens a single pipes for these two nodes to communicate - // back and forth. One listens on it, the other talks to it. - - if ( role == role_sender ) - { - radio.openWritingPipe(pipe); - } - else - { - radio.openReadingPipe(1,pipe); - } - - // - // Start listening - // - - if ( role == role_receiver ) - radio.startListening(); - - // - // Dump the configuration of the rf unit for debugging - // - - radio.printDetails(); -} - -void loop(void) -{ - static uint32_t message_count = 0; - - // - // Sender role. Repeatedly send the current time - // - - if (role == role_sender) - { - // Take the time, and send it. This will block until complete - unsigned long time = millis(); - printf("Now sending %lu...",time); - radio.write( &time, sizeof(unsigned long) ); - - if ( radio.isAckPayloadAvailable() ) - { - radio.read(&message_count,sizeof(message_count)); - printf("Ack: [%lu] ",message_count); - } - printf("OK\n\r"); - - // Try again soon - delay(2000); - } - - // - // Receiver role. Receive each packet, dump it out, add ack payload for next time - // - - if ( role == role_receiver ) - { - // if there is data ready - if ( radio.available() ) - { - // Dump the payloads until we've gotten everything - static unsigned long got_time; - bool done = false; - while (!done) - { - // Fetch the payload, and see if this was the last one. - done = radio.read( &got_time, sizeof(unsigned long) ); - - // Spew it - printf("Got payload %lu\n",got_time); - } - - // Add an ack packet for the next time around. This is a simple - // packet counter - radio.writeAckPayload( 1, &message_count, sizeof(message_count) ); - ++message_count; - } - } -} -// vim:ai:cin:sts=2 sw=2 ft=cpp diff --git a/AVR/lib/RF24/examples/pingpair_pl/printf.h b/AVR/lib/RF24/examples/pingpair_pl/printf.h deleted file mode 100644 index b2efd56..0000000 --- a/AVR/lib/RF24/examples/pingpair_pl/printf.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - Copyright (C) 2011 J. Coliz - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - version 2 as published by the Free Software Foundation. - */ - -/** - * @file printf.h - * - * Setup necessary to direct stdout to the Arduino Serial library, which - * enables 'printf' - */ - -#ifndef __PRINTF_H__ -#define __PRINTF_H__ - -#ifdef ARDUINO - -int serial_putc( char c, FILE * ) -{ - Serial.write( c ); - - return c; -} - -void printf_begin(void) -{ - fdevopen( &serial_putc, 0 ); -} - -#else -#error This example is only for use on Arduino. -#endif // ARDUINO - -#endif // __PRINTF_H__ diff --git a/AVR/lib/RF24/examples/pingpair_sleepy/Jamfile b/AVR/lib/RF24/examples/pingpair_sleepy/Jamfile deleted file mode 100644 index 901f8da..0000000 --- a/AVR/lib/RF24/examples/pingpair_sleepy/Jamfile +++ /dev/null @@ -1,206 +0,0 @@ -PROJECT_NAME = $(PWD:B) ; -PROJECT_DIR = . ; -PROJECT_LIBS = SPI RF24 ; - -OUT_DIR = ojam ; -F_CPU = 16000000 ; -MCU = atmega328p ; -PORTS = /dev/tty.usbserial-A600eHIs /dev/tty.usbserial-A40081RP /dev/tty.usbserial-A9007LmI ; - -UPLOAD_RATE = 57600 ; -AVRDUDE_PROTOCOL = stk500v1 ; -COM = 33 ; - -# Host-specific overrides for locations -if $(OS) = MACOSX -{ -ARDUINO_VERSION = 22 ; -OLD_DIR = /opt/arduino-0021 ; -AVR_TOOLS_PATH = $(OLD_DIR)/hardware/tools/avr/bin ; -AVRDUDECONFIG_PATH = $(OLD_DIR)/hardware/tools/avr/etc ; -ARDUINO_DIR = /opt/Arduino ; -ARDUINO_AVR = /usr/lib/avr/include ; -} - -# Where is everything? -ARDUINO_VERSION ?= 22 ; -AVR_TOOLS_PATH ?= /usr/bin ; -ARDUINO_DIR ?= /opt/arduino-00$(ARDUINO_VERSION) ; -ARDUINO_AVR ?= $(ARDUINO_DIR)/hardware/tools/avr/avr/include/avr ; -AVRDUDECONFIG_PATH ?= $(ARDUINO_DIR)/hardware/tools ; -ARDUINO_CORE = $(ARDUINO_DIR)/hardware/arduino/cores/arduino ; -ARDUINO_LIB = $(ARDUINO_DIR)/libraries ; -SKETCH_LIB = $(HOME)/Source/Arduino/libraries ; -AVR_CC = $(AVR_TOOLS_PATH)/avr-gcc ; -AVR_CXX = $(AVR_TOOLS_PATH)/avr-g++ ; -AVR_LD = $(AVR_TOOLS_PATH)/avr-gcc ; -AVR_OBJCOPY = $(AVR_TOOLS_PATH)/avr-objcopy ; -AVRDUDE = $(AVR_TOOLS_PATH)/avrdude ; - -DEFINES = F_CPU=$(F_CPU)L ARDUINO=$(ARDUINO_VERSION) VERSION_H ; -CTUNING = -ffunction-sections -fdata-sections ; -CXXTUNING = -fno-exceptions -fno-strict-aliasing ; -CFLAGS = -Os -Wall -Wextra -mmcu=$(MCU) $(CTUNING) ; -CXXFLAGS = $(CFLAGS) $(CXXTUNING) ; -LDFLAGS = -Os -lm -Wl,--gc-sections -mmcu=atmega328p ; - -# Search everywhere for headers -HDRS = $(PROJECT_DIR) $(ARDUINO_AVR) $(ARDUINO_CORE) [ GLOB $(ARDUINO_LIB) $(SKETCH_LIB) : [^.]* ] ; - -# Grab everything from the core directory -CORE_MODULES = [ GLOB $(ARDUINO_CORE) : *.c *.cpp ] ; - -# Grab everything from libraries. To avoid this "grab everything" behaviour, you -# can specify specific modules to pick up in PROJECT_MODULES -LIB_MODULES = [ GLOB $(ARDUINO_LIB)/$(PROJECT_LIBS) $(SKETCH_LIB)/$(PROJECT_LIBS) : *.cpp ] ; - -# In addition to explicitly-specified program modules, pick up anything from the current -# dir. -PROJECT_MODULES += [ GLOB $(PROJECT_DIR) : *.c *.cpp *.pde ] ; - -# Shortcut for the out files -OUT = $(OUT_DIR)/$(PROJECT_NAME) ; - -# AvrDude setup -AVRDUDE_FLAGS = -V -F -D -C $(AVRDUDECONFIG_PATH)/avrdude.conf -p $(MCU) -c $(AVRDUDE_PROTOCOL) -b $(UPLOAD_RATE) ; - -rule GitVersion -{ - Always $(<) ; - Depends all : $(<) ; -} - -actions GitVersion -{ - echo "const char program_version[] = \"\\" > $(<) - git log -1 --pretty=format:%h >> $(<) - echo "\";" >> $(<) -} - -GitVersion version.h ; - -rule AvrCc -{ - Depends $(<) : $(>) ; - Depends $(<) : $(<:D) ; - Clean clean : $(<) ; - - CCHDRS on $(<) = [ on $(<) FIncludes $(HDRS) ] ; - CCDEFS on $(<) = [ on $(<) FDefines $(DEFINES) ] ; -} - -actions AvrCc -{ - $(AVR_CC) -c -o $(<) $(CCHDRS) $(CCDEFS) $(CFLAGS) $(>) -} - -rule AvrC++ -{ - Depends $(<) : $(>) ; - Depends $(<) : $(<:D) ; - Clean clean : $(<) ; - - CCHDRS on $(<) = [ on $(<) FIncludes $(HDRS) ] ; - CCDEFS on $(<) = [ on $(<) FDefines $(DEFINES) ] ; -} - -actions AvrC++ -{ - $(AVR_CXX) -c -o $(<) $(CCHDRS) $(CCDEFS) $(CXXFLAGS) $(>) -} - -rule Pde -{ - Depends $(<) : $(>) ; - Depends $(<) : $(<:D) ; - Clean clean : $(<) ; - -} - -actions Pde -{ - echo "#include " > $(<) - echo "#line 1 \"$(>)\"" >> $(<) - cat $(>) >> $(<) -} - -rule AvrPde -{ - local _CPP = $(OUT_DIR)/$(_I:B).cpp ; - Pde $(_CPP) : $(>) ; - AvrC++ $(<) : $(_CPP) ; -} - -rule AvrObject -{ - switch $(>:S) - { - case .c : AvrCc $(<) : $(>) ; - case .cpp : AvrC++ $(<) : $(>) ; - case .pde : AvrPde $(<) : $(>) ; - } -} - -rule AvrObjects -{ - for _I in $(<) - { - AvrObject $(OUT_DIR)/$(_I:B).o : $(_I) ; - } -} - -rule AvrMainFromObjects -{ - Depends $(<) : $(>) ; - Depends $(<) : $(<:D) ; - MkDir $(<:D) ; - Depends all : $(<) ; - Clean clean : $(<) ; -} - -actions AvrMainFromObjects -{ - $(AVR_LD) $(LDFLAGS) -o $(<) $(>) -} - -rule AvrMain -{ - AvrMainFromObjects $(<) : $(OUT_DIR)/$(>:B).o ; - AvrObjects $(>) ; -} - -rule AvrHex -{ - Depends $(<) : $(>) ; - Depends $(<) : $(<:D) ; - Depends hex : $(<) ; - Clean clean : $(<) ; -} - -actions AvrHex -{ - $(AVR_OBJCOPY) -O ihex -R .eeprom $(>) $(<) -} - -rule AvrUpload -{ - Depends $(1) : $(2) ; - Depends $(2) : $(3) ; - NotFile $(1) ; - Always $(1) ; - Always $(2) ; - AvrUploadAction $(2) : $(3) ; -} - -actions AvrUploadAction -{ - $(AVRDUDE) $(AVRDUDE_FLAGS) -P $(<) $(AVRDUDE_WRITE_FLASH) -U flash:w:$(>):i -} - -AvrMain $(OUT).elf : $(CORE_MODULES) $(LIB_MODULES) $(PROJECT_MODULES) ; -AvrHex $(OUT).hex : $(OUT).elf ; - -AvrUpload p6 : /dev/tty.usbserial-A600eHIs : $(OUT).hex ; -AvrUpload p4 : /dev/tty.usbserial-A40081RP : $(OUT).hex ; -AvrUpload p9 : /dev/tty.usbserial-A9007LmI : $(OUT).hex ; - diff --git a/AVR/lib/RF24/examples/pingpair_sleepy/pingpair_sleepy.pde b/AVR/lib/RF24/examples/pingpair_sleepy/pingpair_sleepy.pde deleted file mode 100644 index 49daa69..0000000 --- a/AVR/lib/RF24/examples/pingpair_sleepy/pingpair_sleepy.pde +++ /dev/null @@ -1,288 +0,0 @@ -/* - Copyright (C) 2011 J. Coliz - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - version 2 as published by the Free Software Foundation. - */ - -/** - * Example RF Radio Ping Pair which Sleeps between Sends - * - * This is an example of how to use the RF24 class to create a battery- - * efficient system. It is just like the pingpair.pde example, but the - * ping node powers down the radio and sleeps the MCU after every - * ping/pong cycle. - * - * As with the pingpair.pde example, write this sketch to two different nodes, - * connect the role_pin to ground on one. The ping node sends the current - * time to the pong node, which responds by sending the value back. The ping - * node can then see how long the whole cycle took. - */ - -#include -#include -#include -#include "nRF24L01.h" -#include "RF24.h" -#include "printf.h" - -// -// Hardware configuration -// - -// Set up nRF24L01 radio on SPI bus plus pins 9 & 10 - -RF24 radio(9,10); - -// sets the role of this unit in hardware. Connect to GND to be the 'pong' receiver -// Leave open to be the 'ping' transmitter -const int role_pin = 7; - -// -// Topology -// - -// Radio pipe addresses for the 2 nodes to communicate. -const uint64_t pipes[2] = { 0xF0F0F0F0E1LL, 0xF0F0F0F0D2LL }; - -// -// Role management -// -// Set up role. This sketch uses the same software for all the nodes -// in this system. Doing so greatly simplifies testing. The hardware itself specifies -// which node it is. -// -// This is done through the role_pin -// - -// The various roles supported by this sketch -typedef enum { role_ping_out = 1, role_pong_back } role_e; - -// The debug-friendly names of those roles -const char* role_friendly_name[] = { "invalid", "Ping out", "Pong back"}; - -// The role of the current running sketch -role_e role; - -// -// Sleep declarations -// - -typedef enum { wdt_16ms = 0, wdt_32ms, wdt_64ms, wdt_128ms, wdt_250ms, wdt_500ms, wdt_1s, wdt_2s, wdt_4s, wdt_8s } wdt_prescalar_e; - -void setup_watchdog(uint8_t prescalar); -void do_sleep(void); - -const short sleep_cycles_per_transmission = 4; -volatile short sleep_cycles_remaining = sleep_cycles_per_transmission; - -// -// Normal operation -// - -void setup(void) -{ - // - // Role - // - - // set up the role pin - pinMode(role_pin, INPUT); - digitalWrite(role_pin,HIGH); - delay(20); // Just to get a solid reading on the role pin - - // read the address pin, establish our role - if ( digitalRead(role_pin) ) - role = role_ping_out; - else - role = role_pong_back; - - // - // Print preamble - // - - Serial.begin(57600); - printf_begin(); - printf("\n\rRF24/examples/pingpair_sleepy/\n\r"); - printf("ROLE: %s\n\r",role_friendly_name[role]); - - // - // Prepare sleep parameters - // - - // Only the ping out role sleeps. Wake up every 4s to send a ping - if ( role == role_ping_out ) - setup_watchdog(wdt_1s); - - // - // Setup and configure rf radio - // - - radio.begin(); - - // - // Open pipes to other nodes for communication - // - - // This simple sketch opens two pipes for these two nodes to communicate - // back and forth. - // Open 'our' pipe for writing - // Open the 'other' pipe for reading, in position #1 (we can have up to 5 pipes open for reading) - - if ( role == role_ping_out ) - { - radio.openWritingPipe(pipes[0]); - radio.openReadingPipe(1,pipes[1]); - } - else - { - radio.openWritingPipe(pipes[1]); - radio.openReadingPipe(1,pipes[0]); - } - - // - // Start listening - // - - radio.startListening(); - - // - // Dump the configuration of the rf unit for debugging - // - - radio.printDetails(); -} - -void loop(void) -{ - // - // Ping out role. Repeatedly send the current time - // - - if (role == role_ping_out) - { - // First, stop listening so we can talk. - radio.stopListening(); - - // Take the time, and send it. This will block until complete - unsigned long time = millis(); - printf("Now sending %lu...",time); - radio.write( &time, sizeof(unsigned long) ); - - // Now, continue listening - radio.startListening(); - - // Wait here until we get a response, or timeout (250ms) - unsigned long started_waiting_at = millis(); - bool timeout = false; - while ( ! radio.available() && ! timeout ) - if (millis() - started_waiting_at > 250 ) - timeout = true; - - // Describe the results - if ( timeout ) - { - printf("Failed, response timed out.\n\r"); - } - else - { - // Grab the response, compare, and send to debugging spew - unsigned long got_time; - radio.read( &got_time, sizeof(unsigned long) ); - - // Spew it - printf("Got response %lu, round-trip delay: %lu\n\r",got_time,millis()-got_time); - } - - // - // Shut down the system - // - - // Experiment with some delay here to see if it has an effect - delay(500); - - // Power down the radio. Note that the radio will get powered back up - // on the next write() call. - radio.powerDown(); - - // Sleep the MCU. The watchdog timer will awaken in a short while, and - // continue execution here. - while( sleep_cycles_remaining ) - do_sleep(); - - sleep_cycles_remaining = sleep_cycles_per_transmission; - } - - // - // Pong back role. Receive each packet, dump it out, and send it back - // - // This is untouched from the pingpair example. - // - - if ( role == role_pong_back ) - { - // if there is data ready - if ( radio.available() ) - { - // Dump the payloads until we've gotten everything - unsigned long got_time; - bool done = false; - while (!done) - { - // Fetch the payload, and see if this was the last one. - done = radio.read( &got_time, sizeof(unsigned long) ); - - // Spew it. Include our time, because the ping_out millis counter is unreliable - // due to it sleeping - printf("Got payload %lu @ %lu...",got_time,millis()); - } - - // First, stop listening so we can talk - radio.stopListening(); - - // Send the final one back. - radio.write( &got_time, sizeof(unsigned long) ); - printf("Sent response.\n\r"); - - // Now, resume listening so we catch the next packets. - radio.startListening(); - } - } -} - -// -// Sleep helpers -// - -// 0=16ms, 1=32ms,2=64ms,3=125ms,4=250ms,5=500ms -// 6=1 sec,7=2 sec, 8=4 sec, 9= 8sec - -void setup_watchdog(uint8_t prescalar) -{ - prescalar = min(9,prescalar); - uint8_t wdtcsr = prescalar & 7; - if ( prescalar & 8 ) - wdtcsr |= _BV(WDP3); - - MCUSR &= ~_BV(WDRF); - WDTCSR = _BV(WDCE) | _BV(WDE); - WDTCSR = _BV(WDCE) | wdtcsr | _BV(WDIE); -} - -ISR(WDT_vect) -{ - --sleep_cycles_remaining; -} - -void do_sleep(void) -{ - set_sleep_mode(SLEEP_MODE_PWR_DOWN); // sleep mode is set here - sleep_enable(); - - sleep_mode(); // System sleeps here - - sleep_disable(); // System continues execution here when watchdog timed out -} - -// vim:ai:cin:sts=2 sw=2 ft=cpp diff --git a/AVR/lib/RF24/examples/pingpair_sleepy/printf.h b/AVR/lib/RF24/examples/pingpair_sleepy/printf.h deleted file mode 100644 index b2efd56..0000000 --- a/AVR/lib/RF24/examples/pingpair_sleepy/printf.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - Copyright (C) 2011 J. Coliz - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - version 2 as published by the Free Software Foundation. - */ - -/** - * @file printf.h - * - * Setup necessary to direct stdout to the Arduino Serial library, which - * enables 'printf' - */ - -#ifndef __PRINTF_H__ -#define __PRINTF_H__ - -#ifdef ARDUINO - -int serial_putc( char c, FILE * ) -{ - Serial.write( c ); - - return c; -} - -void printf_begin(void) -{ - fdevopen( &serial_putc, 0 ); -} - -#else -#error This example is only for use on Arduino. -#endif // ARDUINO - -#endif // __PRINTF_H__ diff --git a/AVR/lib/RF24/examples/scanner/Jamfile b/AVR/lib/RF24/examples/scanner/Jamfile deleted file mode 100644 index 1bf541e..0000000 --- a/AVR/lib/RF24/examples/scanner/Jamfile +++ /dev/null @@ -1,210 +0,0 @@ -# (1) Project Information - -PROJECT_LIBS = SPI RF24 ; - -# (2) Board Information - -UPLOAD_PROTOCOL ?= stk500v1 ; -UPLOAD_SPEED ?= 57600 ; -MCU ?= atmega328p ; -F_CPU ?= 16000000 ; -CORE ?= arduino ; -VARIANT ?= standard ; -ARDUINO_VERSION ?= 100 ; - -# (3) USB Ports - -PORTS = p4 p6 p9 u0 u1 u2 ; -PORT_p6 = /dev/tty.usbserial-A600eHIs ; -PORT_p4 = /dev/tty.usbserial-A40081RP ; -PORT_p9 = /dev/tty.usbserial-A9007LmI ; -PORT_u0 = /dev/ttyUSB0 ; -PORT_u1 = /dev/ttyUSB1 ; -PORT_u2 = /dev/ttyUSB2 ; - -# (4) Location of AVR tools -# -# This configuration assumes using avr-tools that were obtained separate from the Arduino -# distribution. - -if $(OS) = MACOSX -{ - AVR_BIN = /usr/local/avrtools/bin ; - AVR_ETC = /usr/local/avrtools/etc ; - AVR_INCLUDE = /usr/local/avrtools/include ; -} -else -{ - AVR_BIN = /usr/bin ; - AVR_INCLUDE = /usr/lib/avr/include ; - AVR_ETC = /etc ; -} - -# (5) Directories where Arduino core and libraries are located - -ARDUINO_DIR ?= /opt/Arduino ; -ARDUINO_CORE = $(ARDUINO_DIR)/hardware/arduino/cores/$(CORE) $(ARDUINO_DIR)/hardware/arduino/variants/$(VARIANT) ; -ARDUINO_LIB = $(ARDUINO_DIR)/libraries ; -SKETCH_LIB = $(HOME)/Source/Arduino/libraries ; - -# -# -------------------------------------------------- -# Below this line usually never needs to be modified -# - -# Tool locations - -CC = $(AVR_BIN)/avr-gcc ; -C++ = $(AVR_BIN)/avr-g++ ; -LINK = $(AVR_BIN)/avr-gcc ; -OBJCOPY = $(AVR_BIN)/avr-objcopy ; -AVRDUDE = $(AVR_BIN)/avrdude ; - -# Flags - -DEFINES += F_CPU=$(F_CPU)L ARDUINO=$(ARDUINO_VERSION) VERSION_H ; -OPTIM = -Os ; -CCFLAGS = -Wall -Wextra -mmcu=$(MCU) -ffunction-sections -fdata-sections ; -C++FLAGS = $(CCFLAGS) -fno-exceptions -fno-strict-aliasing ; -LINKFLAGS = $(OPTIM) -lm -Wl,--gc-sections -mmcu=$(MCU) ; -AVRDUDEFLAGS = -V -F -D -C $(AVR_ETC)/avrdude.conf -p $(MCU) -c $(UPLOAD_PROTOCOL) -b $(UPLOAD_SPEED) ; - -# Search everywhere for headers - -HDRS = $(PWD) $(AVR_INCLUDE) $(ARDUINO_CORE) $(ARDUINO_LIB)/$(PROJECT_LIBS) $(ARDUINO_LIB)/$(PROJECT_LIBS)/utility $(SKETCH_LIB)/$(PROJECT_LIBS) ; - -# Output locations - -LOCATE_TARGET = $(F_CPU) ; -LOCATE_SOURCE = $(F_CPU) ; - -# -# Custom rules -# - -rule GitVersion -{ - Always $(<) ; - Depends all : $(<) ; -} - -actions GitVersion -{ - echo "const char program_version[] = \"\\" > $(<) - git log -1 --pretty=format:%h >> $(<) - echo "\";" >> $(<) -} - -GitVersion version.h ; - -rule Pde -{ - Depends $(<) : $(>) ; - MakeLocate $(<) : $(LOCATE_SOURCE) ; - Clean clean : $(<) ; -} - -if ( $(ARDUINO_VERSION) < 100 ) -{ - ARDUINO_H = WProgram.h ; -} -else -{ - ARDUINO_H = Arduino.h ; -} - -actions Pde -{ - echo "#include <$(ARDUINO_H)>" > $(<) - echo "#line 1 \"$(>)\"" >> $(<) - cat $(>) >> $(<) -} - -rule C++Pde -{ - local _CPP = $(>:B).cpp ; - Pde $(_CPP) : $(>) ; - C++ $(<) : $(_CPP) ; -} - -rule UserObject -{ - switch $(>:S) - { - case .ino : C++Pde $(<) : $(>) ; - case .pde : C++Pde $(<) : $(>) ; - } -} - -rule Objects -{ - local _i ; - - for _i in [ FGristFiles $(<) ] - { - local _b = $(_i:B)$(SUFOBJ) ; - local _o = $(_b:G=$(SOURCE_GRIST:E)) ; - Object $(_o) : $(_i) ; - Depends obj : $(_o) ; - } -} - -rule Main -{ - MainFromObjects $(<) : $(>:B)$(SUFOBJ) ; - Objects $(>) ; -} - -rule Hex -{ - Depends $(<) : $(>) ; - MakeLocate $(<) : $(LOCATE_TARGET) ; - Depends hex : $(<) ; - Clean clean : $(<) ; -} - -actions Hex -{ - $(OBJCOPY) -O ihex -R .eeprom $(>) $(<) -} - -rule Upload -{ - Depends $(1) : $(2) ; - Depends $(2) : $(3) ; - NotFile $(1) ; - Always $(1) ; - Always $(2) ; - UploadAction $(2) : $(3) ; -} - -actions UploadAction -{ - $(AVRDUDE) $(AVRDUDEFLAGS) -P $(<) $(AVRDUDE_WRITE_FLASH) -U flash:w:$(>):i -} - -# -# Targets -# - -# Grab everything from the core directory -CORE_MODULES = [ GLOB $(ARDUINO_CORE) : *.c *.cpp ] ; - -# Grab everything from libraries. To avoid this "grab everything" behaviour, you -# can specify specific modules to pick up in PROJECT_MODULES -LIB_MODULES = [ GLOB $(ARDUINO_LIB)/$(PROJECT_LIBS) $(ARDUINO_LIB)/$(PROJECT_LIBS)/utility $(SKETCH_LIB)/$(PROJECT_LIBS) : *.cpp *.c ] ; - -# Grab everything from the current dir -PROJECT_MODULES += [ GLOB $(PWD) : *.c *.cpp *.pde *.ino ] ; - -# Main output executable -MAIN = $(PWD:B).elf ; - -Main $(MAIN) : $(CORE_MODULES) $(LIB_MODULES) $(PROJECT_MODULES) ; -Hex $(MAIN:B).hex : $(MAIN) ; - -# Upload targets -for _p in $(PORTS) -{ - Upload $(_p) : $(PORT_$(_p)) : $(MAIN:B).hex ; -} diff --git a/AVR/lib/RF24/examples/scanner/output/core.a b/AVR/lib/RF24/examples/scanner/output/core.a deleted file mode 100644 index 6ae105d..0000000 Binary files a/AVR/lib/RF24/examples/scanner/output/core.a and /dev/null differ diff --git a/AVR/lib/RF24/examples/scanner/output/scanner.cpp b/AVR/lib/RF24/examples/scanner/output/scanner.cpp deleted file mode 100644 index 5eb1627..0000000 --- a/AVR/lib/RF24/examples/scanner/output/scanner.cpp +++ /dev/null @@ -1,128 +0,0 @@ -#include -#line 1 "scanner.pde" - -/* - Copyright (C) 2011 James Coliz, Jr. - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - version 2 as published by the Free Software Foundation. - */ - -/** - * Channel scanner - * - * Example to detect interference on the various channels available. - * This is a good diagnostic tool to check whether you're picking a - * good channel for your application. - * - * Inspired by cpixip. - * See http://arduino.cc/forum/index.php/topic,54795.0.html - */ - -#include -#include "nRF24L01.h" -#include "RF24.h" -#include "printf.h" - -// -// Hardware configuration -// - -// Set up nRF24L01 radio on SPI bus plus pins 8 & 9 - -RF24 radio(8,9); - -// -// Channel info -// - -const short num_channels = 128; -short values[num_channels]; - -// -// Setup -// - -void setup(void) -{ - // - // Print preamble - // - - Serial.begin(57600); - printf_begin(); - printf("\n\rRF24/examples/scanner/\n\r"); - - // - // Setup and configure rf radio - // - - radio.begin(); - radio.setAutoAck(false); - - // Get into standby mode - radio.startListening(); - radio.stopListening(); - - // Print out header, high then low digit - int i = 0; - while ( i < num_channels ) - { - printf("%x",i>>4); - ++i; - } - printf("\n\r"); - i = 0; - while ( i < num_channels ) - { - printf("%x",i&0xf); - ++i; - } - printf("\n\r"); -} - -// -// Loop -// - -const short num_reps = 100; - -void loop(void) -{ - // Clear measurement values - memset(values,0,num_channels); - - // Scan all channels num_reps times - int rep_counter = num_reps; - while (rep_counter--) - { - int i = num_channels; - while (i--) - { - // Select this channel - radio.setChannel(i); - - // Listen for a little - radio.startListening(); - delayMicroseconds(128); - radio.stopListening(); - - // Did we get a carrier? - if ( radio.testCarrier() ) - ++values[i]; - } - } - - // Print out channel measurements, clamped to a single hex digit - int i = 0; - while ( i < num_channels ) - { - printf("%x",min(0xf,values[i]&0xf)); - ++i; - } - printf("\n\r"); -} - - -// vim:ai:cin:sts=2 sw=2 ft=cpp diff --git a/AVR/lib/RF24/examples/scanner/output/scanner.elf b/AVR/lib/RF24/examples/scanner/output/scanner.elf deleted file mode 100644 index 5e0f4b1..0000000 Binary files a/AVR/lib/RF24/examples/scanner/output/scanner.elf and /dev/null differ diff --git a/AVR/lib/RF24/examples/scanner/output/scanner.hex b/AVR/lib/RF24/examples/scanner/output/scanner.hex deleted file mode 100644 index 45c37db..0000000 --- a/AVR/lib/RF24/examples/scanner/output/scanner.hex +++ /dev/null @@ -1,325 +0,0 @@ -:100000000C9463000C948B000C948B000C948B006C -:100010000C948B000C948B000C948B000C948B0034 -:100020000C948B000C948B000C948B000C948B0024 -:100030000C948B000C948B000C948B000C948B0014 -:100040000C948F050C948B000C9423060C948B005D -:100050000C948B000C948B000C948B000C948B00F4 -:100060000C948B000C948B000000000024002700EF -:100070002A0000000000250028002B0000000000DE -:1000800023002600290004040404040404040202DA -:100090000202020203030303030301020408102007 -:1000A0004080010204081020010204081020000012 -:1000B0000007000201000003040600000000000029 -:1000C000000090043B0711241FBECFEFD8E0DEBF35 -:1000D000CDBF11E0A0E0B1E0E6EFF3E102C0059092 -:1000E0000D92AA33B107D9F712E0AAE3B1E001C03B -:1000F0001D92A13FB107E1F710E0C6ECD0E004C0CB -:100100002297FE010E94F509C23CD107C9F70E945F -:100110001C060C94F9090C9400000F931F93CF93C5 -:10012000DF938C01EB01009731F46115710519F42F -:1001300020E030E038C081E090E06EE070E00E94A6 -:10014000CB02FC019C01009771F180E8838320972A -:1001500071F0D387C28781E883838091E702909111 -:10016000E802892B21F4F093E802E093E7020115FD -:100170001105C9F011870087838182608383809194 -:10018000E9029091EA02892B71F4F093EA02E0937C -:10019000E9028091EB029091EC02892B21F4F0931B -:1001A000EC02E093EB02C901DF91CF911F910F9117 -:1001B0000895A0E0B0E0EFEDF0E00C94CC09FE0172 -:1001C0003596619171918091E9029091EA02AF01B7 -:1001D0000E94EE002096E2E00C94E809ABE0B0E06B -:1001E000E4EFF0E00C94BC093C012B015A01FC0146 -:1001F00017821682838181FD03C06FEF7FEFC6C136 -:100200009AE0892E1E010894211C311CF3012381E0 -:10021000F20123FD859123FF81912F01882309F4A9 -:10022000B2C1853239F423FD859123FF81912F01DD -:10023000853229F490E0B3010E940604E7CF982F9D -:10024000FF24EE249924FFE1FF15D0F09B3269F0E2 -:100250009C3228F4903259F0933291F40EC09D32C2 -:1002600049F0903369F441E024C052E0F52A84E07B -:10027000F82A28C098E0F92A25C0E0E1FE2A22C029 -:10028000F7FC29C0892F80538A3070F4F6FE05C030 -:10029000989C902C1124980E15C0E89CE02C1124F9 -:1002A000E80EF0E2FF2A0EC09E3229F4F6FC6BC184 -:1002B00040E4F42A07C09C3619F450E8F52A02C03D -:1002C000983649F4F20123FD959123FF91912F0176 -:1002D000992309F0B8CF892F8554833018F08052C4 -:1002E000833038F444E050E0A40EB51E5FE3598338 -:1002F0000FC0933631F0933779F0933509F056C03B -:1003000020C0F5018081898342E050E0A40EB51E33 -:10031000610101E010E012C0F501C080D180F6FC5F -:1003200003C06FEF7FEF02C0692D70E042E050E044 -:10033000A40EB51EC6010E94FB038C015FE7F522E7 -:1003400014C0F501C080D180F6FC03C06FEF7FEFD1 -:1003500002C0692D70E042E050E0A40EB51EC60157 -:100360000E94E9038C0150E8F52AF3FE07C01AC089 -:1003700080E290E0B3010E940604EA948E2D90E0A2 -:1003800008171907A8F30EC0F601F7FC8591F7FED0 -:1003900081916F0190E0B3010E940604E110EA949C -:1003A000015010400115110579F7EAC0943611F09B -:1003B000993669F5F7FE08C0F50120813181428147 -:1003C000538184E090E00AC0F501808191819C0115 -:1003D000442737FD4095542F82E090E0A80EB91EC7 -:1003E0009FE6F92257FF09C0509540953095219519 -:1003F0003F4F4F4F5F4FE0E8FE2ACA01B901A1010C -:100400002AE030E00E943204D82ED21840C095373E -:1004100029F41F2D1F7E2AE030E01DC01F2D197FFB -:100420009F3661F0903720F4983509F0ACC00FC0CA -:10043000903739F0983709F0A6C004C028E030E0C2 -:100440000AC0106114FD146020E130E004C014FD06 -:10045000166020E132E017FF08C0F501608171816C -:100460008281938144E050E008C0F5018081918150 -:10047000BC0180E090E042E050E0A40EB51EA10176 -:100480000E943204D82ED2188FE7F82EF122F6FE01 -:100490000BC05EEFF522D91438F4F4FE07C0F2FC6D -:1004A00005C08FEEF82202C01D2D01C0192DF4FEEB -:1004B0000DC0FE01ED0DF11D8081803319F499EE20 -:1004C000F92208C01F5FF2FE05C003C08F2D867899 -:1004D00009F01F5F0F2DF3FC14C0F0FE0FC01E15B6 -:1004E00010F09D2C0BC09D2C9E0C911A1E2D06C049 -:1004F00080E290E0B3010E9406041F5F1E15C0F366 -:1005000004C01E1510F4E11A01C0EE2404FF0FC050 -:1005100080E390E0B3010E94060402FF1DC001FDCC -:1005200003C088E790E00EC088E590E00BC0802F04 -:10053000867891F001FF02C08BE201C080E2F7FCF7 -:100540008DE290E0B3010E94060406C080E390E0D3 -:10055000B3010E9406049A94D914C0F3DA94F1010D -:10056000ED0DF11D808190E0B3010E940604DD20B5 -:10057000A9F706C080E290E0B3010E940604EA9465 -:10058000EE20C1F743CEF30166817781CB012B9634 -:10059000E2E10C94D8090F931F93CF93DF93689FE8 -:1005A0008001699F100D789F100D1124C8010E94D1 -:1005B000E702EC01009729F060E070E0A8010E94DA -:1005C000F403CE01DF91CF911F910F910895CF9346 -:1005D000DF93BC018230910510F462E070E0A091DD -:1005E000EF02B091F002ED01E0E0F0E040E050E019 -:1005F00021C0888199818617970769F48A819B8138 -:10060000309719F09383828304C09093F002809313 -:10061000EF02FE0134C06817790738F4411551051F -:1006200019F08417950708F4AC01FE018A819B81BB -:100630009C01E9012097E9F641155105A9F1CA018C -:10064000861B970B049708F4BA01E0E0F0E02AC09B -:100650008D919C91119784179507F9F4641775078C -:1006600081F412968D919C911397309719F0938392 -:10067000828304C09093F0028093EF02FD013296D2 -:100680004CC0CA01861B970BFD01E80FF91F61934F -:10069000719302978D939C9340C0FD018281938159 -:1006A0009C01D9011097A1F68091ED029091EE0284 -:1006B000892B41F480912301909124019093EE02C3 -:1006C0008093ED024091250150912601411551057D -:1006D00041F44DB75EB78091210190912201481BF2 -:1006E000590B2091ED023091EE02CA01821B930B4F -:1006F0008617970780F0AB014E5F5F4F8417950711 -:1007000050F0420F531F5093EE024093ED02F90157 -:100710006193719302C0E0E0F0E0CF01DF91CF91EF -:100720000895CF93DF93009709F450C0EC0122970E -:100730001B821A82A091EF02B091F002109709F18A -:1007400040E050E0AC17BD0708F1BB83AA83FE016F -:1007500021913191E20FF31FAE17BF0779F48D910C -:100760009C911197280F391F2E5F3F4F39832883A3 -:1007700012968D919C9113979B838A834115510505 -:1007800071F4D093F002C093EF0220C012968D91C5 -:100790009C911397AD01009711F0DC01D3CFFA01C2 -:1007A000D383C28321913191E20FF31FCE17DF076C -:1007B00069F488819981280F391F2E5F3F4FFA0114 -:1007C000318320838A819B8193838283DF91CF91C0 -:1007D0000895FC010590615070400110D8F7809594 -:1007E00090958E0F9F1F0895DC0101C06D934150BD -:1007F0005040E0F70895FC016150704001900110F5 -:10080000D8F7809590958E0F9F1F08950F931F9393 -:10081000CF93DF938C01EB018B8181FF1BC082FFA3 -:100820000DC02E813F818C819D812817390764F48A -:10083000E881F9810193F983E88306C0E885F985A9 -:10084000802F0995892B31F48E819F8101969F839A -:100850008E8302C00FEF1FEFC801DF91CF911F9170 -:100860000F910895FA01AA27283051F1203181F122 -:10087000E8946F936E7F6E5F7F4F8F4F9F4FAF4FA8 -:10088000B1E03ED0B4E03CD0670F781F891F9A1FBB -:10089000A11D680F791F8A1F911DA11D6A0F711D6F -:1008A000811D911DA11D20D009F468943F912AE07B -:1008B000269F11243019305D3193DEF6CF01089563 -:1008C000462F4770405D4193B3E00FD0C9F7F6CF94 -:1008D000462F4F70405D4A3318F0495D31FD40525C -:1008E000419302D0A9F7EACFB4E0A69597958795F2 -:1008F00077956795BA95C9F70097610571050895D1 -:100900009B01AC010A2E069457954795379527957C -:10091000BA95C9F7620F731F841F951FA01D089514 -:100920008AE391E068E049E00E9475070895FF922C -:100930000F931F93CF93DF9380E8E7E4F1E0DF01AB -:100940001D928A95E9F704E610E021C08AE391E060 -:100950006F2D0E94F2078AE391E00E94840880E8EC -:1009600090E00E94D7058AE391E00E947C078AE329 -:1009700091E00E944608882329F088819981019698 -:10098000998388832297FA94BFEFFB16F9F60150FA -:100990001040EFEF0F3F1E0729F0C5E4D2E08FE7CC -:1009A000F82ED4CFC7E4D1E000E011E000D000D0B1 -:1009B000ADB7BEB712961C930E931197899199917A -:1009C0008F70907014969C938E9313970E94D90009 -:1009D0000F900F900F900F90B2E0C734DB0731F704 -:1009E00000D083E091E0EDB7FEB7928381830E944F -:1009F000D9000F900F90DF91CF911F910F91FF9031 -:100A0000089580E895E060E070E00E948D00089510 -:100A10000F931F93CF93DF9384ED92E040E051EE6C -:100A200060E070E00E9454060E94010500D086E05C -:100A300091E0EDB7FEB7928381830E94D9000F90B9 -:100A40000F908AE391E00E944B088AE391E060E016 -:100A50000E94E8078AE391E00E9484088AE391E01B -:100A60000E947C07C0E0D0E000E011E000D000D0A0 -:100A7000EDB7FEB712830183CE0124E095958795EB -:100A80002A95E1F7948383830E94D90021960F90E1 -:100A90000F900F900F90C038D10541F700D083E040 -:100AA00091E0EDB7FEB7928381830E94D900C0E048 -:100AB000D0E00F900F9000D000D0EDB7FEB70183CB -:100AC0001283CE018F709070948383830E94D9002B -:100AD00021960F900F900F900F90C038D10559F7C5 -:100AE00000D083E091E0EDB7FEB7928381830E944E -:100AF000D9000F900F90DF91CF911F910F91089522 -:100B00000F931F93082F84ED92E0602F0E94280717 -:100B1000112707FD1095C8011F910F9108951F928D -:100B20000F920FB60F9211242F933F938F939F93A1 -:100B3000AF93BF9380914B0290914C02A0914D02D4 -:100B4000B0914E0230914F020196A11DB11D232F8D -:100B50002D5F2D3720F02D570196A11DB11D20933B -:100B60004F0280934B0290934C02A0934D02B0939E -:100B70004E028091470290914802A0914902B091A3 -:100B80004A020196A11DB11D80934702909348022D -:100B9000A0934902B0934A02BF91AF919F918F9168 -:100BA0003F912F910F900FBE0F901F9018950197B6 -:100BB00039F0880F991F880F991F02970197F1F755 -:100BC0000895789484B5826084BD84B5816084BDC5 -:100BD00085B5826085BD85B5816085BDEEE6F0E0B6 -:100BE000808181608083E1E8F0E010828081826012 -:100BF0008083808181608083E0E8F0E08081816093 -:100C00008083E1EBF0E0808184608083E0EBF0E0C2 -:100C1000808181608083EAE7F0E080818460808366 -:100C20008081826080838081816080838081806810 -:100C300080831092C10008950E94E1050E9408057A -:100C40000E949704FDCF1F920F920FB60F921124AE -:100C50002F933F934F938F939F93EF93FF934091E5 -:100C6000C600E091D002F091D10231969F012F771A -:100C7000307031978091D2029091D30228173907B2 -:100C800039F0E05BFD4F40833093D1022093D002D6 -:100C9000FF91EF919F918F914F913F912F910F90E5 -:100CA0000FBE0F901F901895AF92BF92DF92EF92F8 -:100CB000FF920F931F93CF93DF93EC017A018B0187 -:100CC000DD24403081EE580780E0680780E0780737 -:100CD00011F0DD24D39491E0A92EB12CE885F9859B -:100CE000DD2069F0C5010A8802C0880F991F0A94A7 -:100CF000E2F7808360E079E08DE390E005C0108248 -:100D000060E874E88EE190E0A80197010E949A09DA -:100D10002150304040405040569547953795279593 -:100D200080E12030380720F0DD2011F0DD24D6CF1F -:100D3000EC81FD813083EE81FF812083EA85FB8594 -:100D4000208141E050E0CA010E8402C0880F991F43 -:100D50000A94E2F7282B2083EA85FB852081CA01CB -:100D60000F8402C0880F991F0A94E2F7282B208372 -:100D7000EA85FB858081088802C0440F551F0A94CC -:100D8000E2F7842B8083DF91CF911F910F91FF9029 -:100D9000EF90DF90BF90AF900895DC011296ED9137 -:100DA000FC911397E058FF4F2191319180819181FF -:100DB000281B390B2F773070C9010895DC0112967A -:100DC000ED91FC911397EE57FF4F20813181929165 -:100DD0008291E058F0408217930719F42FEF3FEF0C -:100DE00005C0E20FF31F8081282F30E0C90108956C -:100DF000DC011296ED91FC911397DF01AE57BF4FC6 -:100E00002D913C911197E058FF4F80819181E058DE -:100E1000F0408217930719F42FEF3FEF0BC0E20F5A -:100E2000F31F80812F5F3F4F2F7730702D933C93BE -:100E3000282F30E0C9010895DC011296ED91FC9154 -:100E40001397EE57FF4F808191819293829308957B -:100E5000FC01A085B18521898C9190E0022E02C011 -:100E6000959587950A94E2F780FFF6CF0484F5857F -:100E7000E02D608308958BE291E09093D5028093FA -:100E8000D40280E592E09093D7028093D60285EC5D -:100E900090E09093D9028093D80284EC90E09093F4 -:100EA000DB028093DA0280EC90E09093DD02809385 -:100EB000DC0281EC90E09093DF028093DE0286EC0E -:100EC00090E09093E1028093E00284E08093E2025C -:100ED00083E08093E30287E08093E40285E08093DF -:100EE000E50281E08093E6020895FC01608341837E -:100EF00080E2828313820895FC01808160E00E9479 -:100F0000CD080895FF920F931F938C01F62E80E079 -:100F10000E94650985E00E946A09F80181816F2DB0 -:100F20000E94CD081F910F91FF9008951F93CF93BA -:100F3000DF93EC0160E070E00E94820781EE8EBDDD -:100F40000DB407FEFDCF1EB5CE0161E070E00E943A -:100F50008207812FDF91CF911F9108951F93CF9327 -:100F6000DF93EC0160E070E00E94820782EE8EBDAC -:100F70000DB407FEFDCF1EB5CE0161E070E00E940A -:100F80008207812FDF91CF911F9108950F931F93B7 -:100F9000CF93DF93EC01162F042F60E070E00E94E6 -:100FA00082071F7110621EBD0DB407FEFDCF1EB576 -:100FB0000EBD0DB407FEFDCF8EB5CE0161E070E031 -:100FC0000E948207812FDF91CF911F910F91089589 -:100FD000662319F061E04FE302C061E040E00E9447 -:100FE000C6070895462F603808F04FE765E00E9475 -:100FF000C6070895EF92FF920F931F93CF93DF934D -:101000007C01162FEA01022F60E070E00E94820747 -:101010001F7110621EBD0DB407FEFDCF1EB508C0C6 -:1010200088818EBD0DB407FEFDCF21968EB501508F -:101030000023B1F7C70161E070E00E948207812FB1 -:10104000DF91CF911F910F91FF90EF9008951F9323 -:10105000CF93DF93EC01162F60E070E00E948207CF -:101060001F711EBD0DB407FEFDCF8EB58FEF8EBD77 -:101070000DB407FEFDCF1EB5CE0161E070E00E9409 -:101080008207812FDF91CF911F91089569E00E941F -:101090002708817008950F931F938C01FC018081B4 -:1010A00061E00E94A708F801818161E00E94A70821 -:1010B000F801808160E00E94CD08C80161E070E025 -:1010C0000E9482070E947B0981E00E945C0980E007 -:1010D0000E94650985E00E946A09C80164E04FEF3B -:1010E0000E94C607C80167E040E70E94C607C80122 -:1010F0000E94AE07C8010E949607C80161E00E94E5 -:10110000F2071F910F9108950F931F938C0160E0D8 -:101110004BE00E94C607C80167E040E70E94C6078F -:10112000A8014B5F5F4FC8016AE025E00E94FA0703 -:10113000C8010E94AE07F801808161E00E94CD08DD -:1011400082E890E00E94D7051F910F910895482FE3 -:1011500050E0CA0186569F4FFC0124914A575F4FC9 -:10116000FA0184918823C1F0E82FF0E0EE0FFF1F11 -:10117000E859FF4FA591B491662341F49FB7F894C5 -:101180008C91209582238C939FBF08959FB7F894EC -:101190008C91822B8C939FBF0895482F50E0CA01F9 -:1011A00082559F4FFC012491CA0186569F4FFC0136 -:1011B00034914A575F4FFA019491992309F444C03E -:1011C000222351F1233071F0243028F42130A1F092 -:1011D000223011F514C02630B1F02730C1F0243090 -:1011E000D9F404C0809180008F7703C08091800083 -:1011F0008F7D8093800010C084B58F7702C084B546 -:101200008F7D84BD09C08091B0008F7703C080912D -:10121000B0008F7D8093B000E92FF0E0EE0FFF1F4C -:10122000EE58FF4FA591B491662341F49FB7F8940F -:101230008C91309583238C939FBF08959FB7F8942A -:101240008C91832B8C939FBF08950F931F93CF9303 -:10125000DF938C01EB0109C02196D801ED91FC913F -:101260000190F081E02DC801099568816623A1F7FE -:10127000DF91CF911F910F910895EF92FF920F93FD -:101280001F93CF93DF938C017B01EA010CC0D70140 -:101290006D917D01D801ED91FC910190F081E02DDF -:1012A000C80109952197209791F7DF91CF911F9160 -:1012B0000F91FF90EF900895882319F48CB5806208 -:1012C00002C08CB58F7D8CBD08959CB5937F982B03 -:1012D0009CBD08952CB5382F33702C7F322B3CBD2C -:1012E0002DB590E0959587959595879581702E7F82 -:1012F000822B8DBD08958DE061E00E94A7088BE0F0 -:1013000061E00E94A7088AE061E00E94A7088DE0E2 -:1013100060E00E94CD088BE060E00E94CD088AE08A -:1013200061E00E94CD088CB580618CBD8CB5806475 -:101330008CBD0895A1E21A2EAA1BBB1BFD010DC096 -:10134000AA1FBB1FEE1FFF1FA217B307E407F50775 -:1013500020F0A21BB30BE40BF50B661F771F881F51 -:10136000991F1A9469F760957095809590959B01E7 -:10137000AC01BD01CF0108952F923F924F925F9231 -:101380006F927F928F929F92AF92BF92CF92DF9295 -:10139000EF92FF920F931F93CF93DF93CDB7DEB7FA -:1013A000CA1BDB0B0FB6F894DEBF0FBECDBF09948E -:1013B0002A88398848885F846E847D848C849B84E5 -:1013C000AA84B984C884DF80EE80FD800C811B81F3 -:1013D000AA81B981CE0FD11D0FB6F894DEBF0FBE22 -:1013E000CDBFED010895EE0FFF1F0590F491E02DA4 -:0613F0000994F894FFCF00 -:1013F6002578000A0D000A0D524632342F657861B1 -:101406006D706C65732F7363616E6E65722F0A0D56 -:10141600002000F102000000000000280725093D19 -:0A14260009CD06F806DE061C0700DB -:00000001FF diff --git a/AVR/lib/RF24/examples/scanner/printf.h b/AVR/lib/RF24/examples/scanner/printf.h deleted file mode 100644 index 66f6438..0000000 --- a/AVR/lib/RF24/examples/scanner/printf.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - Copyright (C) 2011 J. Coliz - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - version 2 as published by the Free Software Foundation. - */ - -/** - * @file printf.h - * - * Setup necessary to direct stdout to the Arduino Serial library, which - * enables 'printf' - */ - -#ifndef __PRINTF_H__ -#define __PRINTF_H__ - -int serial_putc( char c, FILE * ) -{ - Serial.write( c ); - - return c; -} - -void printf_begin(void) -{ - fdevopen( &serial_putc, 0 ); -} - -#endif // __PRINTF_H__ diff --git a/AVR/lib/RF24/examples/scanner/scanner.pde b/AVR/lib/RF24/examples/scanner/scanner.pde deleted file mode 100644 index 1a43d72..0000000 --- a/AVR/lib/RF24/examples/scanner/scanner.pde +++ /dev/null @@ -1,124 +0,0 @@ -/* - Copyright (C) 2011 J. Coliz - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - version 2 as published by the Free Software Foundation. - */ - -/** - * Channel scanner - * - * Example to detect interference on the various channels available. - * This is a good diagnostic tool to check whether you're picking a - * good channel for your application. - * - * Inspired by cpixip. - * See http://arduino.cc/forum/index.php/topic,54795.0.html - */ - -#include -#include "nRF24L01.h" -#include "RF24.h" -#include "printf.h" - -// -// Hardware configuration -// - -// Set up nRF24L01 radio on SPI bus plus pins 9 & 10 - -RF24 radio(9,10); - -// -// Channel info -// - -const uint8_t num_channels = 128; -uint8_t values[num_channels]; - -// -// Setup -// - -void setup(void) -{ - // - // Print preamble - // - - Serial.begin(57600); - printf_begin(); - printf("\n\rRF24/examples/scanner/\n\r"); - - // - // Setup and configure rf radio - // - - radio.begin(); - radio.setAutoAck(false); - - // Get into standby mode - radio.startListening(); - radio.stopListening(); - - // Print out header, high then low digit - int i = 0; - while ( i < num_channels ) - { - printf("%x",i>>4); - ++i; - } - printf("\n\r"); - i = 0; - while ( i < num_channels ) - { - printf("%x",i&0xf); - ++i; - } - printf("\n\r"); -} - -// -// Loop -// - -const int num_reps = 100; - -void loop(void) -{ - // Clear measurement values - memset(values,0,sizeof(values)); - - // Scan all channels num_reps times - int rep_counter = num_reps; - while (rep_counter--) - { - int i = num_channels; - while (i--) - { - // Select this channel - radio.setChannel(i); - - // Listen for a little - radio.startListening(); - delayMicroseconds(128); - radio.stopListening(); - - // Did we get a carrier? - if ( radio.testCarrier() ) - ++values[i]; - } - } - - // Print out channel measurements, clamped to a single hex digit - int i = 0; - while ( i < num_channels ) - { - printf("%x",min(0xf,values[i]&0xf)); - ++i; - } - printf("\n\r"); -} - -// vim:ai:cin:sts=2 sw=2 ft=cpp diff --git a/AVR/lib/RF24/examples/starping/Jamfile b/AVR/lib/RF24/examples/starping/Jamfile deleted file mode 100644 index de9b1f6..0000000 --- a/AVR/lib/RF24/examples/starping/Jamfile +++ /dev/null @@ -1,206 +0,0 @@ -PROJECT_NAME = $(PWD:B) ; -PROJECT_DIR = . ; -PROJECT_LIBS = EEPROM SPI RF24 ; - -OUT_DIR = ojam ; -F_CPU = 16000000 ; -MCU = atmega328p ; -PORTS = /dev/tty.usbserial-A600eHIs /dev/tty.usbserial-A40081RP /dev/tty.usbserial-A9007LmI ; - -UPLOAD_RATE = 57600 ; -AVRDUDE_PROTOCOL = stk500v1 ; -COM = 33 ; - -# Host-specific overrides for locations -if $(OS) = MACOSX -{ -ARDUINO_VERSION = 22 ; -OLD_DIR = /opt/arduino-0021 ; -AVR_TOOLS_PATH = $(OLD_DIR)/hardware/tools/avr/bin ; -AVRDUDECONFIG_PATH = $(OLD_DIR)/hardware/tools/avr/etc ; -ARDUINO_DIR = /opt/Arduino ; -ARDUINO_AVR = /usr/lib/avr/include ; -} - -# Where is everything? -ARDUINO_VERSION ?= 22 ; -AVR_TOOLS_PATH ?= /usr/bin ; -ARDUINO_DIR ?= /opt/arduino-00$(ARDUINO_VERSION) ; -ARDUINO_AVR ?= $(ARDUINO_DIR)/hardware/tools/avr/avr/include/avr ; -AVRDUDECONFIG_PATH ?= $(ARDUINO_DIR)/hardware/tools ; -ARDUINO_CORE = $(ARDUINO_DIR)/hardware/arduino/cores/arduino ; -ARDUINO_LIB = $(ARDUINO_DIR)/libraries ; -SKETCH_LIB = $(HOME)/Source/Arduino/libraries ; -AVR_CC = $(AVR_TOOLS_PATH)/avr-gcc ; -AVR_CXX = $(AVR_TOOLS_PATH)/avr-g++ ; -AVR_LD = $(AVR_TOOLS_PATH)/avr-gcc ; -AVR_OBJCOPY = $(AVR_TOOLS_PATH)/avr-objcopy ; -AVRDUDE = $(AVR_TOOLS_PATH)/avrdude ; - -DEFINES = F_CPU=$(F_CPU)L ARDUINO=$(ARDUINO_VERSION) VERSION_H ; -CTUNING = -ffunction-sections -fdata-sections ; -CXXTUNING = -fno-exceptions -fno-strict-aliasing ; -CFLAGS = -Os -Wall -Wextra -mmcu=$(MCU) $(CTUNING) ; -CXXFLAGS = $(CFLAGS) $(CXXTUNING) ; -LDFLAGS = -Os -lm -Wl,--gc-sections -mmcu=atmega328p ; - -# Search everywhere for headers -HDRS = $(PROJECT_DIR) $(ARDUINO_AVR) $(ARDUINO_CORE) [ GLOB $(ARDUINO_LIB) $(SKETCH_LIB) : [^.]* ] ; - -# Grab everything from the core directory -CORE_MODULES = [ GLOB $(ARDUINO_CORE) : *.c *.cpp ] ; - -# Grab everything from libraries. To avoid this "grab everything" behaviour, you -# can specify specific modules to pick up in PROJECT_MODULES -LIB_MODULES = [ GLOB $(ARDUINO_LIB)/$(PROJECT_LIBS) $(SKETCH_LIB)/$(PROJECT_LIBS) : *.cpp ] ; - -# In addition to explicitly-specified program modules, pick up anything from the current -# dir. -PROJECT_MODULES += [ GLOB $(PROJECT_DIR) : *.c *.cpp *.pde ] ; - -# Shortcut for the out files -OUT = $(OUT_DIR)/$(PROJECT_NAME) ; - -# AvrDude setup -AVRDUDE_FLAGS = -V -F -D -C $(AVRDUDECONFIG_PATH)/avrdude.conf -p $(MCU) -c $(AVRDUDE_PROTOCOL) -b $(UPLOAD_RATE) ; - -rule GitVersion -{ - Always $(<) ; - Depends all : $(<) ; -} - -actions GitVersion -{ - echo "const char program_version[] = \"\\" > $(<) - git log -1 --pretty=format:%h >> $(<) - echo "\";" >> $(<) -} - -GitVersion version.h ; - -rule AvrCc -{ - Depends $(<) : $(>) ; - Depends $(<) : $(<:D) ; - Clean clean : $(<) ; - - CCHDRS on $(<) = [ on $(<) FIncludes $(HDRS) ] ; - CCDEFS on $(<) = [ on $(<) FDefines $(DEFINES) ] ; -} - -actions AvrCc -{ - $(AVR_CC) -c -o $(<) $(CCHDRS) $(CCDEFS) $(CFLAGS) $(>) -} - -rule AvrC++ -{ - Depends $(<) : $(>) ; - Depends $(<) : $(<:D) ; - Clean clean : $(<) ; - - CCHDRS on $(<) = [ on $(<) FIncludes $(HDRS) ] ; - CCDEFS on $(<) = [ on $(<) FDefines $(DEFINES) ] ; -} - -actions AvrC++ -{ - $(AVR_CXX) -c -o $(<) $(CCHDRS) $(CCDEFS) $(CXXFLAGS) $(>) -} - -rule Pde -{ - Depends $(<) : $(>) ; - Depends $(<) : $(<:D) ; - Clean clean : $(<) ; - -} - -actions Pde -{ - echo "#include " > $(<) - echo "#line 1 \"$(>)\"" >> $(<) - cat $(>) >> $(<) -} - -rule AvrPde -{ - local _CPP = $(OUT_DIR)/$(_I:B).cpp ; - Pde $(_CPP) : $(>) ; - AvrC++ $(<) : $(_CPP) ; -} - -rule AvrObject -{ - switch $(>:S) - { - case .c : AvrCc $(<) : $(>) ; - case .cpp : AvrC++ $(<) : $(>) ; - case .pde : AvrPde $(<) : $(>) ; - } -} - -rule AvrObjects -{ - for _I in $(<) - { - AvrObject $(OUT_DIR)/$(_I:B).o : $(_I) ; - } -} - -rule AvrMainFromObjects -{ - Depends $(<) : $(>) ; - Depends $(<) : $(<:D) ; - MkDir $(<:D) ; - Depends all : $(<) ; - Clean clean : $(<) ; -} - -actions AvrMainFromObjects -{ - $(AVR_LD) $(LDFLAGS) -o $(<) $(>) -} - -rule AvrMain -{ - AvrMainFromObjects $(<) : $(OUT_DIR)/$(>:B).o ; - AvrObjects $(>) ; -} - -rule AvrHex -{ - Depends $(<) : $(>) ; - Depends $(<) : $(<:D) ; - Depends hex : $(<) ; - Clean clean : $(<) ; -} - -actions AvrHex -{ - $(AVR_OBJCOPY) -O ihex -R .eeprom $(>) $(<) -} - -rule AvrUpload -{ - Depends $(1) : $(2) ; - Depends $(2) : $(3) ; - NotFile $(1) ; - Always $(1) ; - Always $(2) ; - AvrUploadAction $(2) : $(3) ; -} - -actions AvrUploadAction -{ - $(AVRDUDE) $(AVRDUDE_FLAGS) -P $(<) $(AVRDUDE_WRITE_FLASH) -U flash:w:$(>):i -} - -AvrMain $(OUT).elf : $(CORE_MODULES) $(LIB_MODULES) $(PROJECT_MODULES) ; -AvrHex $(OUT).hex : $(OUT).elf ; - -AvrUpload p6 : /dev/tty.usbserial-A600eHIs : $(OUT).hex ; -AvrUpload p4 : /dev/tty.usbserial-A40081RP : $(OUT).hex ; -AvrUpload p9 : /dev/tty.usbserial-A9007LmI : $(OUT).hex ; - diff --git a/AVR/lib/RF24/examples/starping/printf.h b/AVR/lib/RF24/examples/starping/printf.h deleted file mode 100644 index b2efd56..0000000 --- a/AVR/lib/RF24/examples/starping/printf.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - Copyright (C) 2011 J. Coliz - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - version 2 as published by the Free Software Foundation. - */ - -/** - * @file printf.h - * - * Setup necessary to direct stdout to the Arduino Serial library, which - * enables 'printf' - */ - -#ifndef __PRINTF_H__ -#define __PRINTF_H__ - -#ifdef ARDUINO - -int serial_putc( char c, FILE * ) -{ - Serial.write( c ); - - return c; -} - -void printf_begin(void) -{ - fdevopen( &serial_putc, 0 ); -} - -#else -#error This example is only for use on Arduino. -#endif // ARDUINO - -#endif // __PRINTF_H__ diff --git a/AVR/lib/RF24/examples/starping/starping.pde b/AVR/lib/RF24/examples/starping/starping.pde deleted file mode 100644 index 4813a77..0000000 --- a/AVR/lib/RF24/examples/starping/starping.pde +++ /dev/null @@ -1,293 +0,0 @@ -/* - Copyright (C) 2011 J. Coliz - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - version 2 as published by the Free Software Foundation. - */ - -/** - * Example RF Radio Ping Star Group - * - * This sketch is a more complex example of using the RF24 library for Arduino. - * Deploy this on up to six nodes. Set one as the 'pong receiver' by tying the - * role_pin low, and the others will be 'ping transmit' units. The ping units - * unit will send out the value of millis() once a second. The pong unit will - * respond back with a copy of the value. Each ping unit can get that response - * back, and determine how long the whole cycle took. - * - * This example requires a bit more complexity to determine which unit is which. - * The pong receiver is identified by having its role_pin tied to ground. - * The ping senders are further differentiated by a byte in eeprom. - */ - -#include -#include -#include "nRF24L01.h" -#include "RF24.h" -#include "printf.h" - -// -// Hardware configuration -// - -// Set up nRF24L01 radio on SPI bus plus pins 9 & 10 - -RF24 radio(9,10); - -// sets the role of this unit in hardware. Connect to GND to be the 'pong' receiver -// Leave open to be the 'pong' receiver. -const int role_pin = 7; - -// -// Topology -// - -// Radio pipe addresses for the nodes to communicate. Only ping nodes need -// dedicated pipes in this topology. Each ping node has a talking pipe -// that it will ping into, and a listening pipe that it will listen for -// the pong. The pong node listens on all the ping node talking pipes -// and sends the pong back on the sending node's specific listening pipe. - -const uint64_t talking_pipes[5] = { 0xF0F0F0F0D2LL, 0xF0F0F0F0C3LL, 0xF0F0F0F0B4LL, 0xF0F0F0F0A5LL, 0xF0F0F0F096LL }; -const uint64_t listening_pipes[5] = { 0x3A3A3A3AD2LL, 0x3A3A3A3AC3LL, 0x3A3A3A3AB4LL, 0x3A3A3A3AA5LL, 0x3A3A3A3A96LL }; - -// -// Role management -// -// Set up role. This sketch uses the same software for all the nodes -// in this system. Doing so greatly simplifies testing. The hardware itself specifies -// which node it is. -// -// This is done through the role_pin -// - -// The various roles supported by this sketch -typedef enum { role_invalid = 0, role_ping_out, role_pong_back } role_e; - -// The debug-friendly names of those roles -const char* role_friendly_name[] = { "invalid", "Ping out", "Pong back"}; - -// The role of the current running sketch -role_e role; - -// -// Address management -// - -// Where in EEPROM is the address stored? -const uint8_t address_at_eeprom_location = 0; - -// What is our address (SRAM cache of the address from EEPROM) -// Note that zero is an INVALID address. The pong back unit takes address -// 1, and the rest are 2-6 -uint8_t node_address; - -void setup(void) -{ - // - // Role - // - - // set up the role pin - pinMode(role_pin, INPUT); - digitalWrite(role_pin,HIGH); - delay(20); // Just to get a solid reading on the role pin - - // read the address pin, establish our role - if ( digitalRead(role_pin) ) - role = role_ping_out; - else - role = role_pong_back; - - // - // Address - // - - if ( role == role_pong_back ) - node_address = 1; - else - { - // Read the address from EEPROM - uint8_t reading = EEPROM.read(address_at_eeprom_location); - - // If it is in a valid range for node addresses, it is our - // address. - if ( reading >= 2 && reading <= 6 ) - node_address = reading; - - // Otherwise, it is invalid, so set our address AND ROLE to 'invalid' - else - { - node_address = 0; - role = role_invalid; - } - } - - // - // Print preamble - // - - Serial.begin(57600); - printf_begin(); - printf("\n\rRF24/examples/starping/\n\r"); - printf("ROLE: %s\n\r",role_friendly_name[role]); - printf("ADDRESS: %i\n\r",node_address); - - // - // Setup and configure rf radio - // - - radio.begin(); - - // - // Open pipes to other nodes for communication - // - - // The pong node listens on all the ping node talking pipes - // and sends the pong back on the sending node's specific listening pipe. - if ( role == role_pong_back ) - { - radio.openReadingPipe(1,talking_pipes[0]); - radio.openReadingPipe(2,talking_pipes[1]); - radio.openReadingPipe(3,talking_pipes[2]); - radio.openReadingPipe(4,talking_pipes[3]); - radio.openReadingPipe(5,talking_pipes[4]); - } - - // Each ping node has a talking pipe that it will ping into, and a listening - // pipe that it will listen for the pong. - if ( role == role_ping_out ) - { - // Write on our talking pipe - radio.openWritingPipe(talking_pipes[node_address-2]); - // Listen on our listening pipe - radio.openReadingPipe(1,listening_pipes[node_address-2]); - } - - // - // Start listening - // - - radio.startListening(); - - // - // Dump the configuration of the rf unit for debugging - // - - radio.printDetails(); - - // - // Prompt the user to assign a node address if we don't have one - // - - if ( role == role_invalid ) - { - printf("\n\r*** NO NODE ADDRESS ASSIGNED *** Send 1 through 6 to assign an address\n\r"); - } -} - -void loop(void) -{ - // - // Ping out role. Repeatedly send the current time - // - - if (role == role_ping_out) - { - // First, stop listening so we can talk. - radio.stopListening(); - - // Take the time, and send it. This will block until complete - unsigned long time = millis(); - printf("Now sending %lu...",time); - radio.write( &time, sizeof(unsigned long) ); - - // Now, continue listening - radio.startListening(); - - // Wait here until we get a response, or timeout (250ms) - unsigned long started_waiting_at = millis(); - bool timeout = false; - while ( ! radio.available() && ! timeout ) - if (millis() - started_waiting_at > 250 ) - timeout = true; - - // Describe the results - if ( timeout ) - { - printf("Failed, response timed out.\n\r"); - } - else - { - // Grab the response, compare, and send to debugging spew - unsigned long got_time; - radio.read( &got_time, sizeof(unsigned long) ); - - // Spew it - printf("Got response %lu, round-trip delay: %lu\n\r",got_time,millis()-got_time); - } - - // Try again 1s later - delay(1000); - } - - // - // Pong back role. Receive each packet, dump it out, and send it back - // - - if ( role == role_pong_back ) - { - // if there is data ready - uint8_t pipe_num; - if ( radio.available(&pipe_num) ) - { - // Dump the payloads until we've gotten everything - unsigned long got_time; - bool done = false; - while (!done) - { - // Fetch the payload, and see if this was the last one. - done = radio.read( &got_time, sizeof(unsigned long) ); - - // Spew it - printf("Got payload %lu from node %i...",got_time,pipe_num+1); - } - - // First, stop listening so we can talk - radio.stopListening(); - - // Open the correct pipe for writing - radio.openWritingPipe(listening_pipes[pipe_num-1]); - - // Retain the low 2 bytes to identify the pipe for the spew - uint16_t pipe_id = listening_pipes[pipe_num-1] & 0xffff; - - // Send the final one back. - radio.write( &got_time, sizeof(unsigned long) ); - printf("Sent response to %04x.\n\r",pipe_id); - - // Now, resume listening so we catch the next packets. - radio.startListening(); - } - } - - // - // Listen for serial input, which is how we set the address - // - if (Serial.available()) - { - // If the character on serial input is in a valid range... - char c = Serial.read(); - if ( c >= '1' && c <= '6' ) - { - // It is our address - EEPROM.write(address_at_eeprom_location,c-'0'); - - // And we are done right now (no easy way to soft reset) - printf("\n\rManually reset address to: %c\n\rPress RESET to continue!",c); - while(1) ; - } - } -} -// vim:ai:ci sts=2 sw=2 ft=cpp diff --git a/AVR/lib/RF24/keywords.txt b/AVR/lib/RF24/keywords.txt deleted file mode 100644 index d0bd557..0000000 --- a/AVR/lib/RF24/keywords.txt +++ /dev/null @@ -1,13 +0,0 @@ - RF24 KEYWORD1 - begin KEYWORD2 - setChannel KEYWORD2 - setPayloadSize KEYWORD2 - getPayloadSize KEYWORD2 - print_details KEYWORD2 - startListening KEYWORD2 - stopListening KEYWORD2 - write KEYWORD2 - available KEYWORD2 - read KEYWORD2 - openWritingPipe KEYWORD2 - openReadingPipe KEYWORD2 \ No newline at end of file diff --git a/AVR/lib/RF24/nRF24L01.h b/AVR/lib/RF24/nRF24L01.h deleted file mode 100644 index 2012ce6..0000000 --- a/AVR/lib/RF24/nRF24L01.h +++ /dev/null @@ -1,125 +0,0 @@ -/* - Copyright (c) 2007 Stefan Engelke - - Permission is hereby granted, free of charge, to any person - obtaining a copy of this software and associated documentation - files (the "Software"), to deal in the Software without - restriction, including without limitation the rights to use, copy, - modify, merge, publish, distribute, sublicense, and/or sell copies - of the Software, and to permit persons to whom the Software is - furnished to do so, subject to the following conditions: - - The above copyright notice and this permission notice shall be - included in all copies or substantial portions of the Software. - - THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - DEALINGS IN THE SOFTWARE. -*/ - -/* Memory Map */ -#define CONFIG 0x00 -#define EN_AA 0x01 -#define EN_RXADDR 0x02 -#define SETUP_AW 0x03 -#define SETUP_RETR 0x04 -#define RF_CH 0x05 -#define RF_SETUP 0x06 -#define STATUS 0x07 -#define OBSERVE_TX 0x08 -#define CD 0x09 -#define RX_ADDR_P0 0x0A -#define RX_ADDR_P1 0x0B -#define RX_ADDR_P2 0x0C -#define RX_ADDR_P3 0x0D -#define RX_ADDR_P4 0x0E -#define RX_ADDR_P5 0x0F -#define TX_ADDR 0x10 -#define RX_PW_P0 0x11 -#define RX_PW_P1 0x12 -#define RX_PW_P2 0x13 -#define RX_PW_P3 0x14 -#define RX_PW_P4 0x15 -#define RX_PW_P5 0x16 -#define FIFO_STATUS 0x17 -#define DYNPD 0x1C -#define FEATURE 0x1D - -/* Bit Mnemonics */ -#define MASK_RX_DR 6 -#define MASK_TX_DS 5 -#define MASK_MAX_RT 4 -#define EN_CRC 3 -#define CRCO 2 -#define PWR_UP 1 -#define PRIM_RX 0 -#define ENAA_P5 5 -#define ENAA_P4 4 -#define ENAA_P3 3 -#define ENAA_P2 2 -#define ENAA_P1 1 -#define ENAA_P0 0 -#define ERX_P5 5 -#define ERX_P4 4 -#define ERX_P3 3 -#define ERX_P2 2 -#define ERX_P1 1 -#define ERX_P0 0 -#define AW 0 -#define ARD 4 -#define ARC 0 -#define PLL_LOCK 4 -#define RF_DR 3 -#define RF_PWR 6 -#define RX_DR 6 -#define TX_DS 5 -#define MAX_RT 4 -#define RX_P_NO 1 -#define TX_FULL 0 -#define PLOS_CNT 4 -#define ARC_CNT 0 -#define TX_REUSE 6 -#define FIFO_FULL 5 -#define TX_EMPTY 4 -#define RX_FULL 1 -#define RX_EMPTY 0 -#define DPL_P5 5 -#define DPL_P4 4 -#define DPL_P3 3 -#define DPL_P2 2 -#define DPL_P1 1 -#define DPL_P0 0 -#define EN_DPL 2 -#define EN_ACK_PAY 1 -#define EN_DYN_ACK 0 - -/* Instruction Mnemonics */ -#define R_REGISTER 0x00 -#define W_REGISTER 0x20 -#define REGISTER_MASK 0x1F -#define ACTIVATE 0x50 -#define R_RX_PL_WID 0x60 -#define R_RX_PAYLOAD 0x61 -#define W_TX_PAYLOAD 0xA0 -#define W_ACK_PAYLOAD 0xA8 -#define FLUSH_TX 0xE1 -#define FLUSH_RX 0xE2 -#define REUSE_TX_PL 0xE3 -#define NOP 0xFF - -/* Non-P omissions */ -#define LNA_HCURR 0 - -/* P model memory Map */ -#define RPD 0x09 - -/* P model bit Mnemonics */ -#define RF_DR_LOW 5 -#define RF_DR_HIGH 3 -#define RF_PWR_LOW 1 -#define RF_PWR_HIGH 2 diff --git a/AVR/lib/RF24/tests/README b/AVR/lib/RF24/tests/README deleted file mode 100644 index 43ceaf5..0000000 --- a/AVR/lib/RF24/tests/README +++ /dev/null @@ -1,7 +0,0 @@ -The sketches in this directory are intended to be checkin tests. -No code should be pushed to github without these tests passing. - -See "runtests.sh" script inside each sketch dir. This script is fully compatible with -git bisest. - -Note that this requires python and py-serial diff --git a/AVR/lib/RF24/tests/native/Jamfile b/AVR/lib/RF24/tests/native/Jamfile deleted file mode 100644 index 10d0336..0000000 --- a/AVR/lib/RF24/tests/native/Jamfile +++ /dev/null @@ -1,300 +0,0 @@ -PROJECT_NAME = $(PWD:B) ; -PROJECT_DIR = . ; -PROJECT_LIBS = RF24 ; - -OUT_DIR = ojam ; -F_CPU = 16000000 ; -MCU = atmega328p ; -PORTS = /dev/tty.usbserial-A600eHIs /dev/tty.usbserial-A40081RP /dev/tty.usbserial-A9007LmI ; - -UPLOAD_RATE = 57600 ; -AVRDUDE_PROTOCOL = stk500v1 ; -COM = 33 ; - -# Host-specific overrides for locations -if $(OS) = MACOSX -{ -ARDUINO_VERSION = 22 ; -OLD_DIR = /opt/arduino-0021 ; -AVR_TOOLS_PATH = $(OLD_DIR)/hardware/tools/avr/bin ; -AVRDUDECONFIG_PATH = $(OLD_DIR)/hardware/tools/avr/etc ; -ARDUINO_DIR = /opt/Arduino ; -ARDUINO_AVR = /usr/lib/avr/include ; -} - -# Where is everything? -ARDUINO_VERSION ?= 22 ; -SKETCH_DIR = $(HOME)/Source/Arduino ; -AVR_TOOLS_PATH ?= /usr/bin ; -ARDUINO_DIR ?= /opt/arduino-00$(ARDUINO_VERSION) ; -ARDUINO_AVR ?= $(ARDUINO_DIR)/hardware/tools/avr/avr/include/avr ; -AVRDUDECONFIG_PATH ?= $(ARDUINO_DIR)/hardware/tools ; -ARDUINO_CORE = $(ARDUINO_DIR)/hardware/arduino/cores/arduino ; -ARDUINO_LIB = $(ARDUINO_DIR)/libraries ; -SKETCH_LIB = $(SKETCH_DIR)/libraries ; -AVR_AS = $(AVR_TOOLS_PATH)/avr-as ; -AVR_CC = $(AVR_TOOLS_PATH)/avr-gcc ; -AVR_CXX = $(AVR_TOOLS_PATH)/avr-g++ ; -AVR_LD = $(AVR_TOOLS_PATH)/avr-gcc ; -AVR_OBJCOPY = $(AVR_TOOLS_PATH)/avr-objcopy ; -AVRDUDE = $(AVR_TOOLS_PATH)/avrdude ; - -DEFINES = F_CPU=$(F_CPU)L ARDUINO=$(ARDUINO_VERSION) VERSION_H HAL=1 ; -CTUNING = -ffunction-sections -fdata-sections ; -CXXTUNING = -fno-exceptions -fno-strict-aliasing ; -ASFLAGS = -mmcu=$(MCU) ; -CFLAGS = -Os -Wall -Wextra $(ASFLAGS) $(CTUNING) ; -CXXFLAGS = $(CFLAGS) $(CXXTUNING) ; -LDFLAGS = -Os -lm -Wl,--gc-sections -mmcu=atmega328p ; - -# Search everywhere for headers -HDRS = $(PROJECT_DIR) $(ARDUINO_AVR) $(ARDUINO_CORE) [ GLOB $(ARDUINO_LIB) $(SKETCH_LIB) : [^.]* ] ; -HDRS += [ GLOB $(HDRS) : utility ] ; - -# Grab everything from the core directory -CORE_MODULES = [ GLOB $(ARDUINO_CORE) : *.c *.cpp ] ; - -# Grab everything from libraries. To avoid this "grab everything" behaviour, you -# can specify specific modules to pick up in PROJECT_MODULES -LIB_MODULES = [ GLOB $(ARDUINO_LIB)/$(PROJECT_LIBS) $(ARDUINO_LIB)/$(PROJECT_LIBS)/utility $(SKETCH_LIB)/$(PROJECT_LIBS) : *.cpp *.c ] ; - -# In addition to explicitly-specified program modules, pick up anything from the current -# dir. -PROJECT_MODULES += [ GLOB $(PROJECT_DIR) : *.c *.cpp *.pde ] ; - -# Shortcut for the out files -OUT = $(OUT_DIR)/$(PROJECT_NAME) ; - -# AvrDude setup -AVRDUDE_FLAGS = -V -F -D -C $(AVRDUDECONFIG_PATH)/avrdude.conf -p $(MCU) -c $(AVRDUDE_PROTOCOL) -b $(UPLOAD_RATE) ; - -rule GitVersion -{ - Always $(<) ; - Depends all : $(<) ; -} - -actions GitVersion -{ - echo "const char program_version[] = \"\\" > $(<) - git log -1 --pretty=format:%h >> $(<) - echo "\";" >> $(<) -} - -# GitVersion version.h ; - -rule AvrAsm -{ - Depends $(<) : $(>) ; - Depends $(<) : $(<:D) ; - Clean clean : $(<) ; - - CCHDRS on $(<) = [ on $(<) FIncludes $(HDRS) ] ; - CCDEFS on $(<) = [ on $(<) FDefines $(DEFINES) ] ; -} - -actions AvrAsm -{ - $(AVR_AS) $(ASFLAGS) -o $(<) $(>) -} - -rule AvrCc -{ - Depends $(<) : $(>) ; - Depends $(<) : $(<:D) ; - Clean clean : $(<) ; - - CCHDRS on $(<) = [ on $(<) FIncludes $(HDRS) ] ; - CCDEFS on $(<) = [ on $(<) FDefines $(DEFINES) ] ; -} - -actions AvrCc -{ - $(AVR_CC) -c -o $(<) $(CCHDRS) $(CCDEFS) $(CFLAGS) $(>) -} - -rule AvrC++ -{ - Depends $(<) : $(>) ; - Depends $(<) : $(<:D) ; - Clean clean : $(<) ; - - CCHDRS on $(<) = [ on $(<) FIncludes $(HDRS) ] ; - CCDEFS on $(<) = [ on $(<) FDefines $(DEFINES) ] ; -} - -actions AvrC++ -{ - $(AVR_CXX) -c -o $(<) $(CCHDRS) $(CCDEFS) $(CXXFLAGS) $(>) -} - -rule AvrAsmFromC++ -{ - Depends $(<) : $(>) ; - Depends $(<) : $(<:D) ; - Clean clean : $(<) ; - - CCHDRS on $(<) = [ on $(<) FIncludes $(HDRS) ] ; - CCDEFS on $(<) = [ on $(<) FDefines $(DEFINES) ] ; -} - -actions AvrAsmFromC++ -{ - $(AVR_CXX) -S -fverbose-asm -o $(<) $(CCHDRS) $(CCDEFS) $(CXXFLAGS) $(>) -} - -rule Pde -{ - Depends $(<) : $(>) ; - Depends $(<) : $(<:D) ; - Clean clean : $(<) ; -} - -actions Pde -{ - echo "#include " > $(<) - echo "#line 1 \"$(>)\"" >> $(<) - cat $(>) >> $(<) -} - -rule AvrPde -{ - local _CPP = $(OUT_DIR)/$(_I:B).cpp ; - Pde $(_CPP) : $(>) ; - AvrC++ $(<) : $(_CPP) ; -} - -rule AvrObject -{ - switch $(>:S) - { - case .S : AvrAsm $(<) : $(>) ; - case .c : AvrCc $(<) : $(>) ; - case .cpp : AvrC++ $(<) : $(>) ; - case .pde : AvrPde $(<) : $(>) ; - } -} - -rule AvrObjects -{ - for _I in $(<) - { - AvrObject $(OUT_DIR)/$(_I:B).o : $(_I) ; - } -} - -rule AvrMainFromObjects -{ - Depends $(<) : $(>) ; - Depends $(<) : $(<:D) ; - MkDir $(<:D) ; - Depends all : $(<) ; - Clean clean : $(<) ; -} - -actions AvrMainFromObjects -{ - $(AVR_LD) $(LDFLAGS) -o $(<) $(>) -} - -rule AvrMain -{ - AvrMainFromObjects $(<) : $(OUT_DIR)/$(>:B).o ; - AvrObjects $(>) ; -} - -rule AvrHex -{ - Depends $(<) : $(>) ; - Depends $(<) : $(<:D) ; - Depends hex : $(<) ; - Clean clean : $(<) ; -} - -actions AvrHex -{ - $(AVR_OBJCOPY) -O ihex -R .eeprom $(>) $(<) -} - -rule AvrUpload -{ - Depends $(1) : $(2) ; - Depends $(2) : $(3) ; - NotFile $(1) ; - Always $(1) ; - Always $(2) ; - AvrUploadAction $(2) : $(3) ; -} - -actions AvrUploadAction -{ - $(AVRDUDE) $(AVRDUDE_FLAGS) -P $(<) $(AVRDUDE_WRITE_FLASH) -U flash:w:$(>):i -} - -AvrMain $(OUT).elf : $(CORE_MODULES) $(LIB_MODULES) $(PROJECT_MODULES) -AvrHex $(OUT).hex : $(OUT).elf ; - -AvrUpload p6 : /dev/tty.usbserial-A600eHIs : $(OUT).hex ; -AvrUpload p4 : /dev/tty.usbserial-A40081RP : $(OUT).hex ; -AvrUpload p9 : /dev/tty.usbserial-A9007LmI : $(OUT).hex ; - -# -# Native -# - -OUT_DIR_NATIVE = out_native ; -OUT_NATIVE = $(OUT_DIR_NATIVE)/$(PROJECT_NAME) ; -NATIVE_CORE = $(SKETCH_DIR)/hardware/native ; -HDRS = $(NATIVE_CORE) $(HDRS) ; -NATIVE_CORE_MODULES = [ GLOB $(NATIVE_CORE) : *.c *.cpp ] ; -NATIVE_MODULES = ; -DEFINES += NATIVE ; - -rule NativePde -{ - local _CPP = $(OUT_DIR_NATIVE)/$(_I:B).cpp ; - Pde $(_CPP) : $(>) ; - C++ $(<) : $(_CPP) ; -} - -rule UserObject -{ - switch $(>) - { - case *.pde : NativePde $(<) : $(>) ; - } -} - -rule Objects -{ - for _I in $(<) - { - local _O = $(OUT_DIR_NATIVE)/$(_I:B).o ; - Object $(_O) : $(_I) ; - } -} - -rule Main -{ - MainFromObjects $(<) : $(OUT_DIR_NATIVE)/$(>:B).o ; - Objects $(>) ; -} - -actions C++ -{ - c++ -c -o $(<) $(CCHDRS) $(CCDEFS) $(>) -} - -actions Link -{ - c++ -o $(<) $(>) -} - - - -MkDir $(OUT_DIR_NATIVE) ; -Depends $(OUT_NATIVE) : $(OUT_DIR_NATIVE) ; -Main $(OUT_NATIVE) : $(NATIVE_CORE_MODULES) $(NATIVE_MODULES) $(LIB_MODULES) $(PROJECT_MODULES) ; - -Depends native : $(OUT_NATIVE) ; - diff --git a/AVR/lib/RF24/tests/native/pingpair_irq.pde b/AVR/lib/RF24/tests/native/pingpair_irq.pde deleted file mode 100644 index 99c2cdf..0000000 --- a/AVR/lib/RF24/tests/native/pingpair_irq.pde +++ /dev/null @@ -1,223 +0,0 @@ -/* - Copyright (C) 2011 James Coliz, Jr. - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - version 2 as published by the Free Software Foundation. - */ - -/** - * Interrupt-driven test for native target - * - * This example is the friendliest for the native target because it doesn't do - * any polling. Made a slight change to call done() at the end of setup. - */ - -#include -#include "nRF24L01.h" -#include "RF24.h" -#include "printf.h" - -// -// Hardware configuration -// - -// Set up nRF24L01 radio on SPI bus plus pins 8 & 9 - -RF24 radio(8,9); - -// sets the role of this unit in hardware. Connect to GND to be the 'pong' receiver -// Leave open to be the 'ping' transmitter -const short role_pin = 7; - -// -// Topology -// - -// Single radio pipe address for the 2 nodes to communicate. -const uint64_t pipe = 0xE8E8F0F0E1LL; - -// -// Role management -// -// Set up role. This sketch uses the same software for all the nodes in this -// system. Doing so greatly simplifies testing. The hardware itself specifies -// which node it is. -// -// This is done through the role_pin -// - -// The various roles supported by this sketch -typedef enum { role_sender = 1, role_receiver } role_e; - -// The debug-friendly names of those roles -const char* role_friendly_name[] = { "invalid", "Sender", "Receiver"}; - -// The role of the current running sketch -role_e role; - -// Interrupt handler, check the radio because we got an IRQ -void check_radio(void); - -void setup(void) -{ - // - // Role - // - - // set up the role pin - pinMode(role_pin, INPUT); - digitalWrite(role_pin,HIGH); - delay(20); // Just to get a solid reading on the role pin - - // read the address pin, establish our role - if ( digitalRead(role_pin) ) - role = role_sender; - else - role = role_receiver; - - // - // Print preamble - // - - Serial.begin(57600); - printf_begin(); - printf("\n\rRF24/examples/pingpair_irq/\n\r"); - printf("ROLE: %s\n\r",role_friendly_name[role]); - - // - // Setup and configure rf radio - // - - radio.begin(); - - // We will be using the Ack Payload feature, so please enable it - radio.enableAckPayload(); - - // - // Open pipes to other nodes for communication - // - - // This simple sketch opens a single pipe for these two nodes to communicate - // back and forth. One listens on it, the other talks to it. - - if ( role == role_sender ) - { - radio.openWritingPipe(pipe); - } - else - { - radio.openReadingPipe(1,pipe); - } - - // - // Start listening - // - - if ( role == role_receiver ) - radio.startListening(); - - // - // Dump the configuration of the rf unit for debugging - // - - radio.printDetails(); - - // - // Attach interrupt handler to interrupt #0 (using pin 2) - // on BOTH the sender and receiver - // - - attachInterrupt(0, check_radio, FALLING); - - // - // On the native target, this is as far as we get - // -#if NATIVE - done(); -#endif -} - -static uint32_t message_count = 0; - -void loop(void) -{ - // - // Sender role. Repeatedly send the current time - // - - if (role == role_sender) - { - // Take the time, and send it. - unsigned long time = millis(); - printf("Now sending %lu\n\r",time); - radio.startWrite( &time, sizeof(unsigned long) ); - - // Try again soon - delay(2000); - } - - // - // Receiver role: Does nothing! All the work is in IRQ - // - -} - -void check_radio(void) -{ - // What happened? - bool tx,fail,rx; - radio.whatHappened(tx,fail,rx); - - // Have we successfully transmitted? - if ( tx ) - { - if ( role == role_sender ) - printf("Send:OK\n\r"); - - if ( role == role_receiver ) - printf("Ack Payload:Sent\n\r"); - } - - // Have we failed to transmit? - if ( fail ) - { - if ( role == role_sender ) - printf("Send:Failed\n\r"); - - if ( role == role_receiver ) - printf("Ack Payload:Failed\n\r"); - } - - // Transmitter can power down for now, because - // the transmission is done. - if ( ( tx || fail ) && ( role == role_sender ) ) - radio.powerDown(); - - // Did we receive a message? - if ( rx ) - { - // If we're the sender, we've received an ack payload - if ( role == role_sender ) - { - radio.read(&message_count,sizeof(message_count)); - printf("Ack:%lu\n\r",(unsigned long)message_count); - } - - // If we're the receiver, we've received a time message - if ( role == role_receiver ) - { - // Get this payload and dump it - static unsigned long got_time; - radio.read( &got_time, sizeof(got_time) ); - printf("Got payload %lu\n\r",got_time); - - // Add an ack packet for the next time around. This is a simple - // packet counter - radio.writeAckPayload( 1, &message_count, sizeof(message_count) ); - ++message_count; - } - } -} - -// vim:ai:cin:sts=2 sw=2 ft=cpp diff --git a/AVR/lib/RF24/tests/native/printf.h b/AVR/lib/RF24/tests/native/printf.h deleted file mode 100644 index df6c46a..0000000 --- a/AVR/lib/RF24/tests/native/printf.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - Copyright (C) 2011 James Coliz, Jr. - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - version 2 as published by the Free Software Foundation. - */ - -/** - * @file printf.h - * - * Setup necessary to direct stdout to the Arduino Serial library, which - * enables 'printf' - */ - -#ifndef __PRINTF_H__ -#define __PRINTF_H__ - -#include "WProgram.h" - -int serial_putc( char c, FILE * ) -{ - Serial.write( c ); - - return c; -} - -void printf_begin(void) -{ - fdevopen( &serial_putc, 0 ); -} - -#endif // __PRINTF_H__ diff --git a/AVR/lib/RF24/tests/pingpair_blocking/Jamfile b/AVR/lib/RF24/tests/pingpair_blocking/Jamfile deleted file mode 100644 index 18244ec..0000000 --- a/AVR/lib/RF24/tests/pingpair_blocking/Jamfile +++ /dev/null @@ -1,219 +0,0 @@ -# (1) Project Information - -PROJECT_LIBS = SPI RF24 ; -PROJECT_DIRS = $(PWD) ; - -# (2) Board Information - -UPLOAD_PROTOCOL ?= arduino ; -UPLOAD_SPEED ?= 115200 ; -MCU ?= atmega328p ; -F_CPU ?= 16000000 ; -CORE ?= arduino ; -VARIANT ?= standard ; -ARDUINO_VERSION ?= 100 ; - -# (3) USB Ports - -PORTS = p4 p6 p9 u0 u1 u2 ; -PORT_p6 = /dev/tty.usbserial-A600eHIs ; -PORT_p4 = /dev/tty.usbserial-A40081RP ; -PORT_p9 = /dev/tty.usbserial-A9007LmI ; -PORT_u0 = /dev/ttyUSB0 ; -PORT_u1 = /dev/ttyUSB1 ; -PORT_u2 = /dev/ttyUSB2 ; - -# (4) Location of AVR tools -# -# This configuration assumes using avr-tools that were obtained separate from the Arduino -# distribution. - -if $(OS) = MACOSX -{ - AVR_BIN ?= /usr/local/avrtools/bin ; - AVR_ETC = /usr/local/avrtools/etc ; - AVR_INCLUDE = /usr/local/avrtools/include ; -} -else -{ - AVR_BIN ?= /usr/bin ; - AVR_INCLUDE = /usr/lib/avr/include ; - AVR_ETC = /etc ; -} - -# (5) Directories where Arduino core and libraries are located - -ARDUINO_DIR ?= /opt/Arduino ; -ARDUINO_CORE = $(ARDUINO_DIR)/hardware/arduino/cores/$(CORE) $(ARDUINO_DIR)/hardware/arduino/variants/$(VARIANT) ; -ARDUINO_LIB = $(ARDUINO_DIR)/libraries ; -SKETCH_LIB = $(HOME)/Source/Arduino/libraries ; - -# -# -------------------------------------------------- -# Below this line usually never needs to be modified -# - -# Tool locations - -CC = $(AVR_BIN)/avr-gcc ; -C++ = $(AVR_BIN)/avr-g++ ; -LINK = $(AVR_BIN)/avr-gcc ; -AR = $(AVR_BIN)/avr-ar rcs ; -RANLIB = ; -OBJCOPY = $(AVR_BIN)/avr-objcopy ; -AVRDUDE ?= $(AVR_BIN)/avrdude ; - -# Flags - -DEFINES += F_CPU=$(F_CPU)L ARDUINO=$(ARDUINO_VERSION) VERSION_H ; -OPTIM = -Os ; -CCFLAGS = -Wall -Wextra -Wno-strict-aliasing -mmcu=$(MCU) -ffunction-sections -fdata-sections ; -C++FLAGS = $(CCFLAGS) -fno-exceptions -fno-strict-aliasing ; -LINKFLAGS = $(OPTIM) -lm -Wl,--gc-sections -mmcu=$(MCU) ; -AVRDUDEFLAGS = -V -F -D -C $(AVR_ETC)/avrdude.conf -p $(MCU) -c $(UPLOAD_PROTOCOL) -b $(UPLOAD_SPEED) ; - -# Search everywhere for headers - -HDRS = $(PROJECT_DIRS) $(AVR_INCLUDE) $(ARDUINO_CORE) $(ARDUINO_LIB)/$(PROJECT_LIBS) $(ARDUINO_LIB)/$(PROJECT_LIBS)/utility $(SKETCH_LIB)/$(PROJECT_LIBS) ; - -# Output locations - -LOCATE_TARGET = $(F_CPU) ; -LOCATE_SOURCE = $(F_CPU) ; - -# -# Custom rules -# - -rule GitVersion -{ - Always $(<) ; - Depends all : $(<) ; -} - -actions GitVersion -{ - echo "const char program_version[] = \"\\" > $(<) - git log -1 --pretty=format:%h >> $(<) - echo "\";" >> $(<) -} - -GitVersion version.h ; - -rule Pde -{ - Depends $(<) : $(>) ; - MakeLocate $(<) : $(LOCATE_SOURCE) ; - Clean clean : $(<) ; -} - -if ( $(ARDUINO_VERSION) < 100 ) -{ - ARDUINO_H = WProgram.h ; -} -else -{ - ARDUINO_H = Arduino.h ; -} - -actions Pde -{ - echo "#include <$(ARDUINO_H)>" > $(<) - echo "#line 1 \"$(>)\"" >> $(<) - cat $(>) >> $(<) -} - -rule C++Pde -{ - local _CPP = $(>:B).cpp ; - Pde $(_CPP) : $(>) ; - C++ $(<) : $(_CPP) ; -} - -rule UserObject -{ - switch $(>:S) - { - case .ino : C++Pde $(<) : $(>) ; - case .pde : C++Pde $(<) : $(>) ; - } -} - -rule Objects -{ - local _i ; - - for _i in [ FGristFiles $(<) ] - { - local _b = $(_i:B)$(SUFOBJ) ; - local _o = $(_b:G=$(SOURCE_GRIST:E)) ; - Object $(_o) : $(_i) ; - Depends obj : $(_o) ; - } -} - -rule Library -{ - LibraryFromObjects $(<) : $(>:B)$(SUFOBJ) ; - Objects $(>) ; -} - -rule Main -{ - MainFromObjects $(<) : $(>:B)$(SUFOBJ) ; - Objects $(>) ; -} - -rule Hex -{ - Depends $(<) : $(>) ; - MakeLocate $(<) : $(LOCATE_TARGET) ; - Depends hex : $(<) ; - Clean clean : $(<) ; -} - -actions Hex -{ - $(OBJCOPY) -O ihex -R .eeprom $(>) $(<) -} - -rule Upload -{ - Depends $(1) : $(2) ; - Depends $(2) : $(3) ; - NotFile $(1) ; - Always $(1) ; - Always $(2) ; - UploadAction $(2) : $(3) ; -} - -actions UploadAction -{ - $(AVRDUDE) $(AVRDUDEFLAGS) -P $(<) $(AVRDUDE_WRITE_FLASH) -U flash:w:$(>):i -} - -rule Arduino -{ - LINKFLAGS on $(<) = $(LINKFLAGS) -Wl,-Map=$(LOCATE_TARGET)/$(<:B).map ; - Main $(<) : $(>) ; - LinkLibraries $(<) : core libs ; - Hex $(<:B).hex : $(<) ; - for _p in $(PORTS) - { - Upload $(_p) : $(PORT_$(_p)) : $(<:B).hex ; - } -} - -# -# Targets -# - -# Grab everything from the core directory -Library core : [ GLOB $(ARDUINO_CORE) : *.c *.cpp ] ; - -# Grab everything from libraries. To avoid this "grab everything" behaviour, you -# can specify specific modules to pick up in PROJECT_MODULES -Library libs : [ GLOB $(ARDUINO_LIB)/$(PROJECT_LIBS) $(ARDUINO_LIB)/$(PROJECT_LIBS)/utility $(SKETCH_LIB)/$(PROJECT_LIBS) : *.cpp *.c ] ; - -# Main output executable -Arduino $(PWD:B).elf : $(PROJECT_MODULES) [ GLOB $(PROJECT_DIRS) : *.c *.cpp *.pde *.ino ] ; diff --git a/AVR/lib/RF24/tests/pingpair_blocking/pingpair_blocking.pde b/AVR/lib/RF24/tests/pingpair_blocking/pingpair_blocking.pde deleted file mode 100644 index 1501d37..0000000 --- a/AVR/lib/RF24/tests/pingpair_blocking/pingpair_blocking.pde +++ /dev/null @@ -1,273 +0,0 @@ -/* - Copyright (C) 2011 James Coliz, Jr. - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - version 2 as published by the Free Software Foundation. - */ - -#include -#include "nRF24L01.h" -#include "RF24.h" -#include "printf.h" - -// -// Test version of RF24, exposes some protected interface -// - -class RF24Test: public RF24 -{ -public: RF24Test(int a, int b): RF24(a,b) {} -}; - - -// -// Hardware configuration -// - -// Set up nRF24L01 radio on SPI bus plus pins 8 & 9 - -RF24Test radio(8,9); - -// sets the role of this unit in hardware. Connect to GND to be the 'pong' receiver -// Leave open to be the 'ping' transmitter -const int role_pin = 7; - -// -// Topology -// - -// Radio pipe addresses for the 2 nodes to communicate. -const uint64_t pipes[2] = { 0xF0F0F0F0E1LL, 0xF0F0F0F0D2LL }; - -// -// Role management -// -// Set up role. This sketch uses the same software for all the nodes -// in this system. Doing so greatly simplifies testing. The hardware itself specifies -// which node it is. -// -// This is done through the role_pin -// - -// The various roles supported by this sketch -typedef enum { role_ping_out = 1, role_pong_back } role_e; - -// The debug-friendly names of those roles -const char* role_friendly_name[] = { "invalid", "Ping out", "Pong back"}; - -// The role of the current running sketch -role_e role; - -// -// Test state -// - -bool done; //*< Are we done with the test? */ -bool passed; //*< Have we passed the test? */ -bool notified; //*< Have we notified the user we're done? */ -const int num_needed = 10; //*< How many success/failures until we're done? */ -int receives_remaining = num_needed; //*< How many ack packets until we declare victory? */ -int failures_remaining = num_needed; //*< How many more failed sends until we declare failure? */ -const int interval = 100; //*< ms to wait between sends */ - -char configuration = '1'; //*< Configuration key, one char sent in by the test framework to tell us how to configure, this is the default */ - -void one_ok(void) -{ - // Have we received enough yet? - if ( ! --receives_remaining ) - { - done = true; - passed = true; - } -} - -void one_failed(void) -{ - // Have we failed enough yet? - if ( ! --failures_remaining ) - { - done = true; - passed = false; - } -} - -void setup(void) -{ - // - // Role - // - - // set up the role pin - pinMode(role_pin, INPUT); - digitalWrite(role_pin,HIGH); - delay(20); // Just to get a solid reading on the role pin - - // read the address pin, establish our role - if ( digitalRead(role_pin) ) - role = role_ping_out; - else - role = role_pong_back; - - // - // Print preamble - // - - Serial.begin(57600); - printf_begin(); - printf("\n\rRF24/tests/pingpair_blocking/\n\r"); - printf("ROLE: %s\n\r",role_friendly_name[role]); - - // - // get test config - // - - printf("+READY press any key to start\n\r\n\r"); - - while (! Serial.available() ) {} - configuration = Serial.read(); - printf("Configuration\t = %c\n\r",configuration); - - // - // Setup and configure rf radio - // - - radio.begin(); - - // - // Open pipes to other nodes for communication - // - - // This simple sketch opens two pipes for these two nodes to communicate - // back and forth. - // Open 'our' pipe for writing - // Open the 'other' pipe for reading, in position #1 (we can have up to 5 pipes open for reading) - - if ( role == role_ping_out ) - { - radio.openWritingPipe(pipes[0]); - radio.openReadingPipe(1,pipes[1]); - } - else - { - radio.openWritingPipe(pipes[1]); - radio.openReadingPipe(1,pipes[0]); - } - - // - // Start listening - // - - radio.startListening(); - - // - // Dump the configuration of the rf unit for debugging - // - - radio.printDetails(); - - if ( role == role_pong_back ) - printf("\n\r+OK "); -} - -void loop(void) -{ - // - // Ping out role. Repeatedly send the current time - // - - if (role == role_ping_out) - { - // First, stop listening so we can talk. - radio.stopListening(); - - // Take the time, and send it. This will block until complete - unsigned long time = millis(); - printf("Now sending %lu...",time); - radio.write( &time, sizeof(unsigned long) ); - - // Now, continue listening - radio.startListening(); - - // Wait here until we get a response, or timeout (250ms) - unsigned long started_waiting_at = millis(); - bool timeout = false; - while ( ! radio.available() && ! timeout ) - if (millis() - started_waiting_at > 200 ) - timeout = true; - - // Describe the results - if ( timeout ) - { - printf("Failed, response timed out.\n\r"); - one_failed(); - } - else - { - // Grab the response, compare, and send to debugging spew - unsigned long got_time; - radio.read( &got_time, sizeof(unsigned long) ); - - // Spew it - printf("Got response %lu, round-trip delay: %lu\n\r",got_time,millis()-got_time); - one_ok(); - } - - // Try again later - delay(250); - } - - // - // Pong back role. Receive each packet, dump it out, and send it back - // - - if ( role == role_pong_back ) - { - // if there is data ready - if ( radio.available() ) - { - // Dump the payloads until we've gotten everything - unsigned long got_time; - bool done = false; - while (!done) - { - // Fetch the payload, and see if this was the last one. - done = radio.read( &got_time, sizeof(unsigned long) ); - - // Spew it - printf("Got payload %lu...",got_time); - - // Delay just a little bit to let the other unit - // make the transition to receiver - delay(20); - } - - // First, stop listening so we can talk - radio.stopListening(); - - // Send the final one back. - radio.write( &got_time, sizeof(unsigned long) ); - printf("Sent response.\n\r"); - - // Now, resume listening so we catch the next packets. - radio.startListening(); - - } - } - - // - // Stop the test if we're done and report results - // - if ( done && ! notified ) - { - notified = true; - - printf("\n\r+OK "); - if ( passed ) - printf("PASS\n\r\n\r"); - else - printf("FAIL\n\r\n\r"); - } -} -// vim:cin:ai:sts=2 sw=2 ft=cpp diff --git a/AVR/lib/RF24/tests/pingpair_blocking/printf.h b/AVR/lib/RF24/tests/pingpair_blocking/printf.h deleted file mode 100644 index b2efd56..0000000 --- a/AVR/lib/RF24/tests/pingpair_blocking/printf.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - Copyright (C) 2011 J. Coliz - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - version 2 as published by the Free Software Foundation. - */ - -/** - * @file printf.h - * - * Setup necessary to direct stdout to the Arduino Serial library, which - * enables 'printf' - */ - -#ifndef __PRINTF_H__ -#define __PRINTF_H__ - -#ifdef ARDUINO - -int serial_putc( char c, FILE * ) -{ - Serial.write( c ); - - return c; -} - -void printf_begin(void) -{ - fdevopen( &serial_putc, 0 ); -} - -#else -#error This example is only for use on Arduino. -#endif // ARDUINO - -#endif // __PRINTF_H__ diff --git a/AVR/lib/RF24/tests/pingpair_blocking/runtest.py b/AVR/lib/RF24/tests/pingpair_blocking/runtest.py deleted file mode 100644 index 0772f95..0000000 --- a/AVR/lib/RF24/tests/pingpair_blocking/runtest.py +++ /dev/null @@ -1,25 +0,0 @@ -#!/usr/bin/python - -import sys,serial - -def read_until(token): - while 1: - line = ser.readline(None) - sys.stdout.write(line) - - if (line.startswith(token)): - break - return line - - -ser = serial.Serial(sys.argv[1], 57600, timeout=5, dsrdtr=False, rtscts=False) - -read_until("+READY") -ser.write(sys.argv[2]) - -line = read_until("+OK") -ser.close() -if (line.find("PASS") != -1): - sys.exit(0) -else: - sys.exit(1) diff --git a/AVR/lib/RF24/tests/pingpair_blocking/runtests.sh b/AVR/lib/RF24/tests/pingpair_blocking/runtests.sh deleted file mode 100644 index e106448..0000000 --- a/AVR/lib/RF24/tests/pingpair_blocking/runtests.sh +++ /dev/null @@ -1,5 +0,0 @@ -#!/bin/sh - -# Connect u0 to receiver, u1 to sender - -jam u0 u1 && expect test.ex diff --git a/AVR/lib/RF24/tests/pingpair_blocking/test.ex b/AVR/lib/RF24/tests/pingpair_blocking/test.ex deleted file mode 100644 index ea992ad..0000000 --- a/AVR/lib/RF24/tests/pingpair_blocking/test.ex +++ /dev/null @@ -1,11 +0,0 @@ -#/usr/bin/expect - -set timeout 100 -spawn picocom -b 57600 /dev/ttyUSB0 -expect "+READY" -send "1" -expect "+OK" -spawn picocom -b 57600 /dev/ttyUSB1 -expect "+READY" -send "1" -expect "+OK" diff --git a/AVR/lib/RF24/tests/pingpair_test/Jamfile b/AVR/lib/RF24/tests/pingpair_test/Jamfile deleted file mode 100644 index 18244ec..0000000 --- a/AVR/lib/RF24/tests/pingpair_test/Jamfile +++ /dev/null @@ -1,219 +0,0 @@ -# (1) Project Information - -PROJECT_LIBS = SPI RF24 ; -PROJECT_DIRS = $(PWD) ; - -# (2) Board Information - -UPLOAD_PROTOCOL ?= arduino ; -UPLOAD_SPEED ?= 115200 ; -MCU ?= atmega328p ; -F_CPU ?= 16000000 ; -CORE ?= arduino ; -VARIANT ?= standard ; -ARDUINO_VERSION ?= 100 ; - -# (3) USB Ports - -PORTS = p4 p6 p9 u0 u1 u2 ; -PORT_p6 = /dev/tty.usbserial-A600eHIs ; -PORT_p4 = /dev/tty.usbserial-A40081RP ; -PORT_p9 = /dev/tty.usbserial-A9007LmI ; -PORT_u0 = /dev/ttyUSB0 ; -PORT_u1 = /dev/ttyUSB1 ; -PORT_u2 = /dev/ttyUSB2 ; - -# (4) Location of AVR tools -# -# This configuration assumes using avr-tools that were obtained separate from the Arduino -# distribution. - -if $(OS) = MACOSX -{ - AVR_BIN ?= /usr/local/avrtools/bin ; - AVR_ETC = /usr/local/avrtools/etc ; - AVR_INCLUDE = /usr/local/avrtools/include ; -} -else -{ - AVR_BIN ?= /usr/bin ; - AVR_INCLUDE = /usr/lib/avr/include ; - AVR_ETC = /etc ; -} - -# (5) Directories where Arduino core and libraries are located - -ARDUINO_DIR ?= /opt/Arduino ; -ARDUINO_CORE = $(ARDUINO_DIR)/hardware/arduino/cores/$(CORE) $(ARDUINO_DIR)/hardware/arduino/variants/$(VARIANT) ; -ARDUINO_LIB = $(ARDUINO_DIR)/libraries ; -SKETCH_LIB = $(HOME)/Source/Arduino/libraries ; - -# -# -------------------------------------------------- -# Below this line usually never needs to be modified -# - -# Tool locations - -CC = $(AVR_BIN)/avr-gcc ; -C++ = $(AVR_BIN)/avr-g++ ; -LINK = $(AVR_BIN)/avr-gcc ; -AR = $(AVR_BIN)/avr-ar rcs ; -RANLIB = ; -OBJCOPY = $(AVR_BIN)/avr-objcopy ; -AVRDUDE ?= $(AVR_BIN)/avrdude ; - -# Flags - -DEFINES += F_CPU=$(F_CPU)L ARDUINO=$(ARDUINO_VERSION) VERSION_H ; -OPTIM = -Os ; -CCFLAGS = -Wall -Wextra -Wno-strict-aliasing -mmcu=$(MCU) -ffunction-sections -fdata-sections ; -C++FLAGS = $(CCFLAGS) -fno-exceptions -fno-strict-aliasing ; -LINKFLAGS = $(OPTIM) -lm -Wl,--gc-sections -mmcu=$(MCU) ; -AVRDUDEFLAGS = -V -F -D -C $(AVR_ETC)/avrdude.conf -p $(MCU) -c $(UPLOAD_PROTOCOL) -b $(UPLOAD_SPEED) ; - -# Search everywhere for headers - -HDRS = $(PROJECT_DIRS) $(AVR_INCLUDE) $(ARDUINO_CORE) $(ARDUINO_LIB)/$(PROJECT_LIBS) $(ARDUINO_LIB)/$(PROJECT_LIBS)/utility $(SKETCH_LIB)/$(PROJECT_LIBS) ; - -# Output locations - -LOCATE_TARGET = $(F_CPU) ; -LOCATE_SOURCE = $(F_CPU) ; - -# -# Custom rules -# - -rule GitVersion -{ - Always $(<) ; - Depends all : $(<) ; -} - -actions GitVersion -{ - echo "const char program_version[] = \"\\" > $(<) - git log -1 --pretty=format:%h >> $(<) - echo "\";" >> $(<) -} - -GitVersion version.h ; - -rule Pde -{ - Depends $(<) : $(>) ; - MakeLocate $(<) : $(LOCATE_SOURCE) ; - Clean clean : $(<) ; -} - -if ( $(ARDUINO_VERSION) < 100 ) -{ - ARDUINO_H = WProgram.h ; -} -else -{ - ARDUINO_H = Arduino.h ; -} - -actions Pde -{ - echo "#include <$(ARDUINO_H)>" > $(<) - echo "#line 1 \"$(>)\"" >> $(<) - cat $(>) >> $(<) -} - -rule C++Pde -{ - local _CPP = $(>:B).cpp ; - Pde $(_CPP) : $(>) ; - C++ $(<) : $(_CPP) ; -} - -rule UserObject -{ - switch $(>:S) - { - case .ino : C++Pde $(<) : $(>) ; - case .pde : C++Pde $(<) : $(>) ; - } -} - -rule Objects -{ - local _i ; - - for _i in [ FGristFiles $(<) ] - { - local _b = $(_i:B)$(SUFOBJ) ; - local _o = $(_b:G=$(SOURCE_GRIST:E)) ; - Object $(_o) : $(_i) ; - Depends obj : $(_o) ; - } -} - -rule Library -{ - LibraryFromObjects $(<) : $(>:B)$(SUFOBJ) ; - Objects $(>) ; -} - -rule Main -{ - MainFromObjects $(<) : $(>:B)$(SUFOBJ) ; - Objects $(>) ; -} - -rule Hex -{ - Depends $(<) : $(>) ; - MakeLocate $(<) : $(LOCATE_TARGET) ; - Depends hex : $(<) ; - Clean clean : $(<) ; -} - -actions Hex -{ - $(OBJCOPY) -O ihex -R .eeprom $(>) $(<) -} - -rule Upload -{ - Depends $(1) : $(2) ; - Depends $(2) : $(3) ; - NotFile $(1) ; - Always $(1) ; - Always $(2) ; - UploadAction $(2) : $(3) ; -} - -actions UploadAction -{ - $(AVRDUDE) $(AVRDUDEFLAGS) -P $(<) $(AVRDUDE_WRITE_FLASH) -U flash:w:$(>):i -} - -rule Arduino -{ - LINKFLAGS on $(<) = $(LINKFLAGS) -Wl,-Map=$(LOCATE_TARGET)/$(<:B).map ; - Main $(<) : $(>) ; - LinkLibraries $(<) : core libs ; - Hex $(<:B).hex : $(<) ; - for _p in $(PORTS) - { - Upload $(_p) : $(PORT_$(_p)) : $(<:B).hex ; - } -} - -# -# Targets -# - -# Grab everything from the core directory -Library core : [ GLOB $(ARDUINO_CORE) : *.c *.cpp ] ; - -# Grab everything from libraries. To avoid this "grab everything" behaviour, you -# can specify specific modules to pick up in PROJECT_MODULES -Library libs : [ GLOB $(ARDUINO_LIB)/$(PROJECT_LIBS) $(ARDUINO_LIB)/$(PROJECT_LIBS)/utility $(SKETCH_LIB)/$(PROJECT_LIBS) : *.cpp *.c ] ; - -# Main output executable -Arduino $(PWD:B).elf : $(PROJECT_MODULES) [ GLOB $(PROJECT_DIRS) : *.c *.cpp *.pde *.ino ] ; diff --git a/AVR/lib/RF24/tests/pingpair_test/pingpair_test.pde b/AVR/lib/RF24/tests/pingpair_test/pingpair_test.pde deleted file mode 100644 index 6acbf51..0000000 --- a/AVR/lib/RF24/tests/pingpair_test/pingpair_test.pde +++ /dev/null @@ -1,435 +0,0 @@ -/* - Copyright (C) 2011 James Coliz, Jr. - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - version 2 as published by the Free Software Foundation. - */ - -/** - * Full test on single RF pair - * - * This sketches uses as many RF24 methods as possible in a single test. - * - * To operate: - * Upload this sketch on two nodes, each with IRQ -> pin 2 - * One node needs pin 7 -> GND, the other NC. That's the receiving node - * Monitor the sending node's serial output - * Look for "+OK PASS" or "+OK FAIL" - */ - -#include -#include "nRF24L01.h" -#include "RF24.h" -#include "printf.h" - -// -// Hardware configuration -// - -// Set up nRF24L01 radio on SPI bus plus pins 8 & 9 - -RF24 radio(8,9); - -// sets the role of this unit in hardware. Connect to GND to be the 'pong' receiver -// Leave open to be the 'ping' transmitter -const short role_pin = 7; - -// -// Topology -// - -// Single radio pipe address for the 2 nodes to communicate. -const uint64_t pipe = 0xE8E8F0F0E1LL; - -// -// Role management -// -// Set up role. This sketch uses the same software for all the nodes in this -// system. Doing so greatly simplifies testing. The hardware itself specifies -// which node it is. -// -// This is done through the role_pin -// - -// The various roles supported by this sketch -typedef enum { role_sender = 1, role_receiver } role_e; - -// The debug-friendly names of those roles -const char* role_friendly_name[] = { "invalid", "Sender", "Receiver"}; - -// The role of the current running sketch -role_e role; - -// Interrupt handler, check the radio because we got an IRQ -void check_radio(void); - -// -// Payload -// - -const int min_payload_size = 4; -const int max_payload_size = 32; -int payload_size_increments_by = 2; -int next_payload_size = min_payload_size; - -char receive_payload[max_payload_size+1]; // +1 to allow room for a terminating NULL char - -// -// Test state -// - -bool done; //*< Are we done with the test? */ -bool passed; //*< Have we passed the test? */ -bool notified; //*< Have we notified the user we're done? */ -const int num_needed = 10; //*< How many success/failures until we're done? */ -int receives_remaining = num_needed; //*< How many ack packets until we declare victory? */ -int failures_remaining = num_needed; //*< How many more failed sends until we declare failure? */ -const int interval = 100; //*< ms to wait between sends */ - -char configuration = '1'; //*< Configuration key, one char sent in by the test framework to tell us how to configure, this is the default */ - -uint8_t pipe_number = 1; // Which pipe to send on. - -void one_ok(void) -{ - // Have we received enough yet? - if ( ! --receives_remaining ) - { - done = true; - passed = true; - } -} - -void one_failed(void) -{ - // Have we failed enough yet? - if ( ! --failures_remaining ) - { - done = true; - passed = false; - } -} - -// -// Setup -// - -void setup(void) -{ - // - // Role - // - - // set up the role pin - pinMode(role_pin, INPUT); - digitalWrite(role_pin,HIGH); - delay(20); // Just to get a solid reading on the role pin - - // read the address pin, establish our role - if ( digitalRead(role_pin) ) - role = role_sender; - else - role = role_receiver; - - // - // Print preamble - // - - Serial.begin(57600); - printf_begin(); - printf("\n\rRF24/tests/pingpair_test/\n\r"); - printf("ROLE: %s\n\r",role_friendly_name[role]); - - // - // Read configuration from serial - // - // It would be a much better test if this program could accept configuration - // from the serial port. Then it would be possible to run the same test under - // lots of different circumstances. - // - // The idea is that we will print "+READY" at this point. The python script - // will wait for it, and then send down a configuration script that we - // execute here and then run with. - // - // The test controller will need to configure the receiver first, then go run - // the test on the sender. - // - - printf("+READY press any key to start\n\r\n\r"); - - while (! Serial.available() ) {} - configuration = Serial.read(); - printf("Configuration\t = %c\n\r",configuration); - - // - // Setup and configure rf radio - // - - radio.begin(); - - // We will be using the Ack Payload feature, so please enable it - radio.enableAckPayload(); - - // Config 2 is special radio config - if (configuration=='2') - { - radio.setCRCLength(RF24_CRC_8); - radio.setDataRate(RF24_250KBPS); - radio.setChannel(10); - } - else - { - //Otherwise, default radio config - - // Optional: Increase CRC length for improved reliability - radio.setCRCLength(RF24_CRC_16); - - // Optional: Decrease data rate for improved reliability - radio.setDataRate(RF24_1MBPS); - - // Optional: Pick a high channel - radio.setChannel(90); - } - - // Config 3 is static payloads only - if (configuration == '3') - { - next_payload_size = 16; - payload_size_increments_by = 0; - radio.setPayloadSize(next_payload_size); - } - else - { - // enable dynamic payloads - radio.enableDynamicPayloads(); - } - - // Config 4 tests out a higher pipe ## - if (configuration == '4' && role == role_sender) - { - // Set top 4 bytes of the address in pipe 1 - radio.openReadingPipe(1,pipe & 0xFFFFFFFF00ULL); - - // indicate the pipe to use - pipe_number = 5; - } - else if ( role == role_sender ) - { - radio.openReadingPipe(5,0); - } - - // - // Open pipes to other nodes for communication - // - - // This simple sketch opens a single pipe for these two nodes to communicate - // back and forth. One listens on it, the other talks to it. - - if ( role == role_sender ) - { - radio.openWritingPipe(pipe); - } - else - { - radio.openReadingPipe(pipe_number,pipe); - } - - // - // Start listening - // - - if ( role == role_receiver ) - radio.startListening(); - - // - // Dump the configuration of the rf unit for debugging - // - - radio.printDetails(); - - // - // Attach interrupt handler to interrupt #0 (using pin 2) - // on BOTH the sender and receiver - // - - attachInterrupt(0, check_radio, FALLING); - - if ( role == role_receiver ) - printf("\n\r+OK "); -} - -// -// Print buffer -// -// Printing from the interrupt handler is a bad idea, so we print from there -// to this intermediate buffer -// - -char prbuf[1000]; -char *prbuf_end = prbuf + sizeof(prbuf); -char *prbuf_in = prbuf; -char *prbuf_out = prbuf; - -// -// Loop -// - -static uint32_t message_count = 0; -static uint32_t last_message_count = 0; - -void loop(void) -{ - // - // Sender role. Repeatedly send the current time - // - - if (role == role_sender && !done) - { - // The payload will always be the same, what will change is how much of it we send. - static char send_payload[] = "ABCDEFGHIJKLMNOPQRSTUVWXYZ789012"; - - // First, stop listening so we can talk. - radio.stopListening(); - - // Send it. This will block until complete - printf("\n\rNow sending length %i...",next_payload_size); - radio.startWrite( send_payload, next_payload_size ); - - // Update size for next time. - next_payload_size += payload_size_increments_by; - if ( next_payload_size > max_payload_size ) - next_payload_size = min_payload_size; - - // Try again soon - delay(interval); - - // Timeout if we have not received anything back ever - if ( ! last_message_count && millis() > interval * 100 ) - { - printf("No responses received. Are interrupts connected??\n\r"); - done = true; - } - } - - // - // Receiver role: Does nothing! All the work is in IRQ - // - - // - // Spew print buffer - // - - size_t write_length = prbuf_in - prbuf_out; - if ( write_length ) - { - Serial.write(reinterpret_cast(prbuf_out),write_length); - prbuf_out += write_length; - } - - // - // Stop the test if we're done and report results - // - if ( done && ! notified ) - { - notified = true; - - printf("\n\r+OK "); - if ( passed ) - printf("PASS\n\r\n\r"); - else - printf("FAIL\n\r\n\r"); - } - -} - -void check_radio(void) -{ - // What happened? - bool tx,fail,rx; - radio.whatHappened(tx,fail,rx); - - // Have we successfully transmitted? - if ( tx ) - { - if ( role == role_sender ) - prbuf_in += sprintf(prbuf_in,"Send:OK "); - - if ( role == role_receiver ) - prbuf_in += sprintf(prbuf_in,"Ack Payload:Sent\n\r"); - } - - // Have we failed to transmit? - if ( fail ) - { - if ( role == role_sender ) - { - prbuf_in += sprintf(prbuf_in,"Send:Failed "); - - // log status of this line - one_failed(); - } - - if ( role == role_receiver ) - prbuf_in += sprintf(prbuf_in,"Ack Payload:Failed\n\r"); - } - - // Transmitter can power down for now, because - // the transmission is done. - if ( ( tx || fail ) && ( role == role_sender ) ) - radio.powerDown(); - - // Did we receive a message? - if ( rx ) - { - // If we're the sender, we've received an ack payload - if ( role == role_sender ) - { - radio.read(&message_count,sizeof(message_count)); - prbuf_in += sprintf(prbuf_in,"Ack:%lu ",message_count); - - // is this ack what we were expecting? to account - // for failures, we simply want to make sure we get a - // DIFFERENT ack every time. - if ( ( message_count != last_message_count ) || ( configuration=='3' && message_count == 16 ) ) - { - prbuf_in += sprintf(prbuf_in,"OK "); - one_ok(); - } - else - { - prbuf_in += sprintf(prbuf_in,"FAILED "); - one_failed(); - } - last_message_count = message_count; - } - - // If we're the receiver, we've received a time message - if ( role == role_receiver ) - { - // Get this payload and dump it - size_t len = max_payload_size; - memset(receive_payload,0,max_payload_size); - - if ( configuration == '3' ) - len = next_payload_size; - else - len = radio.getDynamicPayloadSize(); - - radio.read( receive_payload, len ); - - // Put a zero at the end for easy printing - receive_payload[len] = 0; - - // Spew it - prbuf_in += sprintf(prbuf_in,"Recv size=%i val=%s len=%u\n\r",len,receive_payload,strlen(receive_payload)); - - // Add an ack packet for the next time around. - // Here we will report back how many bytes we got this time. - radio.writeAckPayload( pipe_number, &len, sizeof(len) ); - ++message_count; - } - } -} - -// vim:ai:cin:sts=2 sw=2 ft=cpp diff --git a/AVR/lib/RF24/tests/pingpair_test/printf.h b/AVR/lib/RF24/tests/pingpair_test/printf.h deleted file mode 100644 index b2efd56..0000000 --- a/AVR/lib/RF24/tests/pingpair_test/printf.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - Copyright (C) 2011 J. Coliz - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - version 2 as published by the Free Software Foundation. - */ - -/** - * @file printf.h - * - * Setup necessary to direct stdout to the Arduino Serial library, which - * enables 'printf' - */ - -#ifndef __PRINTF_H__ -#define __PRINTF_H__ - -#ifdef ARDUINO - -int serial_putc( char c, FILE * ) -{ - Serial.write( c ); - - return c; -} - -void printf_begin(void) -{ - fdevopen( &serial_putc, 0 ); -} - -#else -#error This example is only for use on Arduino. -#endif // ARDUINO - -#endif // __PRINTF_H__ diff --git a/AVR/lib/RF24/tests/pingpair_test/runtest.py b/AVR/lib/RF24/tests/pingpair_test/runtest.py deleted file mode 100644 index 45fb65c..0000000 --- a/AVR/lib/RF24/tests/pingpair_test/runtest.py +++ /dev/null @@ -1,25 +0,0 @@ -#!/opt/local/bin/python - -import sys,serial - -def read_until(token): - while 1: - line = ser.readline(None,"\r") - sys.stdout.write(line) - - if (line.startswith(token)): - break - return line - - -ser = serial.Serial(sys.argv[1], 57600, timeout=5, dsrdtr=False, rtscts=False) - -read_until("+READY") -ser.write(sys.argv[2]) - -line = read_until("+OK") -ser.close() -if (line.find("PASS") != -1): - sys.exit(0) -else: - sys.exit(1) diff --git a/AVR/lib/RF24/tests/pingpair_test/runtests.sh b/AVR/lib/RF24/tests/pingpair_test/runtests.sh deleted file mode 100644 index 4d02310..0000000 --- a/AVR/lib/RF24/tests/pingpair_test/runtests.sh +++ /dev/null @@ -1,21 +0,0 @@ -#!/bin/sh - -# Connect u0 to receiver, u0 to sender -# WARNING: Test config 2 only works with PLUS units. - -jam u0 u1 && expect test.ex 1 -sleep 1 -stty 57600 raw ignbrk hup < /dev/ttyUSB0 -sleep 1 -stty 57600 raw ignbrk hup < /dev/ttyUSB1 -expect test.ex 2 -sleep 1 -stty 57600 raw ignbrk hup < /dev/ttyUSB0 -sleep 1 -stty 57600 raw ignbrk hup < /dev/ttyUSB1 -expect test.ex 3 -sleep 1 -stty 57600 raw ignbrk hup < /dev/ttyUSB0 -sleep 1 -stty 57600 raw ignbrk hup < /dev/ttyUSB1 -expect test.ex 4 diff --git a/AVR/lib/RF24/tests/pingpair_test/test.ex b/AVR/lib/RF24/tests/pingpair_test/test.ex deleted file mode 100644 index a14ffef..0000000 --- a/AVR/lib/RF24/tests/pingpair_test/test.ex +++ /dev/null @@ -1,11 +0,0 @@ -#/usr/bin/expect - -set timeout 100 -spawn picocom -b 57600 /dev/ttyUSB0 -expect "+READY" -send [lindex $argv 0] -expect "+OK" -spawn picocom -b 57600 /dev/ttyUSB1 -expect "+READY" -send [lindex $argv 0] -expect "+OK" diff --git a/AVR/lib/RF24/uart.c b/AVR/lib/RF24/uart.c deleted file mode 100644 index 3bf2b42..0000000 --- a/AVR/lib/RF24/uart.c +++ /dev/null @@ -1,651 +0,0 @@ -/************************************************************************* -Title: Interrupt UART library with receive/transmit circular buffers -Author: Peter Fleury http://jump.to/fleury -File: $Id: uart.c,v 1.6.2.2 2009/11/29 08:56:12 Peter Exp $ -Software: AVR-GCC 4.1, AVR Libc 1.4.6 or higher -Hardware: any AVR with built-in UART, -License: GNU General Public License - -DESCRIPTION: - An interrupt is generated when the UART has finished transmitting or - receiving a byte. The interrupt handling routines use circular buffers - for buffering received and transmitted data. - - The UART_RX_BUFFER_SIZE and UART_TX_BUFFER_SIZE variables define - the buffer size in bytes. Note that these variables must be a - power of 2. - -USAGE: - Refere to the header file uart.h for a description of the routines. - See also example test_uart.c. - -NOTES: - Based on Atmel Application Note AVR306 - -LICENSE: - Copyright (C) 2006 Peter Fleury - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - -*************************************************************************/ -#include -#include -#include -#include "uart.h" - - -/* - * constants and macros - */ - -/* size of RX/TX buffers */ -#define UART_RX_BUFFER_MASK ( UART_RX_BUFFER_SIZE - 1) -#define UART_TX_BUFFER_MASK ( UART_TX_BUFFER_SIZE - 1) - -#if ( UART_RX_BUFFER_SIZE & UART_RX_BUFFER_MASK ) -#error RX buffer size is not a power of 2 -#endif -#if ( UART_TX_BUFFER_SIZE & UART_TX_BUFFER_MASK ) -#error TX buffer size is not a power of 2 -#endif - -#if defined(__AVR_AT90S2313__) \ - || defined(__AVR_AT90S4414__) || defined(__AVR_AT90S4434__) \ - || defined(__AVR_AT90S8515__) || defined(__AVR_AT90S8535__) \ - || defined(__AVR_ATmega103__) - /* old AVR classic or ATmega103 with one UART */ - #define AT90_UART - #define UART0_RECEIVE_INTERRUPT SIG_UART_RECV - #define UART0_TRANSMIT_INTERRUPT SIG_UART_DATA - #define UART0_STATUS USR - #define UART0_CONTROL UCR - #define UART0_DATA UDR - #define UART0_UDRIE UDRIE -#elif defined(__AVR_AT90S2333__) || defined(__AVR_AT90S4433__) - /* old AVR classic with one UART */ - #define AT90_UART - #define UART0_RECEIVE_INTERRUPT SIG_UART_RECV - #define UART0_TRANSMIT_INTERRUPT SIG_UART_DATA - #define UART0_STATUS UCSRA - #define UART0_CONTROL UCSRB - #define UART0_DATA UDR - #define UART0_UDRIE UDRIE -#elif defined(__AVR_ATmega8__) || defined(__AVR_ATmega16__) || defined(__AVR_ATmega32__) \ - || defined(__AVR_ATmega8515__) || defined(__AVR_ATmega8535__) \ - || defined(__AVR_ATmega323__) - /* ATmega with one USART */ - #define ATMEGA_USART - #define UART0_RECEIVE_INTERRUPT SIG_UART_RECV - #define UART0_TRANSMIT_INTERRUPT SIG_UART_DATA - #define UART0_STATUS UCSRA - #define UART0_CONTROL UCSRB - #define UART0_DATA UDR - #define UART0_UDRIE UDRIE -#elif defined(__AVR_ATmega163__) - /* ATmega163 with one UART */ - #define ATMEGA_UART - #define UART0_RECEIVE_INTERRUPT SIG_UART_RECV - #define UART0_TRANSMIT_INTERRUPT SIG_UART_DATA - #define UART0_STATUS UCSRA - #define UART0_CONTROL UCSRB - #define UART0_DATA UDR - #define UART0_UDRIE UDRIE -#elif defined(__AVR_ATmega162__) - /* ATmega with two USART */ - #define ATMEGA_USART0 - #define ATMEGA_USART1 - #define UART0_RECEIVE_INTERRUPT SIG_USART0_RECV - #define UART1_RECEIVE_INTERRUPT SIG_USART1_RECV - #define UART0_TRANSMIT_INTERRUPT SIG_USART0_DATA - #define UART1_TRANSMIT_INTERRUPT SIG_USART1_DATA - #define UART0_STATUS UCSR0A - #define UART0_CONTROL UCSR0B - #define UART0_DATA UDR0 - #define UART0_UDRIE UDRIE0 - #define UART1_STATUS UCSR1A - #define UART1_CONTROL UCSR1B - #define UART1_DATA UDR1 - #define UART1_UDRIE UDRIE1 -#elif defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__) - /* ATmega with two USART */ - #define ATMEGA_USART0 - #define ATMEGA_USART1 - #define UART0_RECEIVE_INTERRUPT SIG_UART0_RECV - #define UART1_RECEIVE_INTERRUPT SIG_UART1_RECV - #define UART0_TRANSMIT_INTERRUPT SIG_UART0_DATA - #define UART1_TRANSMIT_INTERRUPT SIG_UART1_DATA - #define UART0_STATUS UCSR0A - #define UART0_CONTROL UCSR0B - #define UART0_DATA UDR0 - #define UART0_UDRIE UDRIE0 - #define UART1_STATUS UCSR1A - #define UART1_CONTROL UCSR1B - #define UART1_DATA UDR1 - #define UART1_UDRIE UDRIE1 -#elif defined(__AVR_ATmega161__) - /* ATmega with UART */ - #error "AVR ATmega161 currently not supported by this libaray !" -#elif defined(__AVR_ATmega169__) - /* ATmega with one USART */ - #define ATMEGA_USART - #define UART0_RECEIVE_INTERRUPT SIG_USART_RECV - #define UART0_TRANSMIT_INTERRUPT SIG_USART_DATA - #define UART0_STATUS UCSRA - #define UART0_CONTROL UCSRB - #define UART0_DATA UDR - #define UART0_UDRIE UDRIE -#elif defined(__AVR_ATmega48__) ||defined(__AVR_ATmega88__) || defined(__AVR_ATmega168__) || defined(__AVR_ATmega48P__) || defined(__AVR_ATmega88P__) || defined(__AVR_ATmega168P__) || defined(__AVR_ATmega328P__) - /* ATmega with one USART */ - #define ATMEGA_USART0 - #define UART0_RECEIVE_INTERRUPT USART_RX_vect - #define UART0_TRANSMIT_INTERRUPT USART_TX_vect - #define UART0_STATUS UCSR0A - #define UART0_CONTROL UCSR0B - #define UART0_DATA UDR0 - #define UART0_UDRIE UDRIE0 -#elif defined(__AVR_ATtiny2313__) - #define ATMEGA_USART - #define UART0_RECEIVE_INTERRUPT SIG_USART0_RX - #define UART0_TRANSMIT_INTERRUPT SIG_USART0_UDRE - #define UART0_STATUS UCSRA - #define UART0_CONTROL UCSRB - #define UART0_DATA UDR - #define UART0_UDRIE UDRIE -#elif defined(__AVR_ATmega329__) ||defined(__AVR_ATmega3290__) ||\ - defined(__AVR_ATmega649__) ||defined(__AVR_ATmega6490__) ||\ - defined(__AVR_ATmega325__) ||defined(__AVR_ATmega3250__) ||\ - defined(__AVR_ATmega645__) ||defined(__AVR_ATmega6450__) - /* ATmega with one USART */ - #define ATMEGA_USART0 - #define UART0_RECEIVE_INTERRUPT SIG_UART_RECV - #define UART0_TRANSMIT_INTERRUPT SIG_UART_DATA - #define UART0_STATUS UCSR0A - #define UART0_CONTROL UCSR0B - #define UART0_DATA UDR0 - #define UART0_UDRIE UDRIE0 -#elif defined(__AVR_ATmega2560__) || defined(__AVR_ATmega2561__) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega1281__) || defined(__AVR_ATmega640__) -/* ATmega with two USART */ - #define ATMEGA_USART0 - #define ATMEGA_USART1 - #define UART0_RECEIVE_INTERRUPT SIG_USART0_RECV - #define UART1_RECEIVE_INTERRUPT SIG_USART1_RECV - #define UART0_TRANSMIT_INTERRUPT SIG_USART0_DATA - #define UART1_TRANSMIT_INTERRUPT SIG_USART1_DATA - #define UART0_STATUS UCSR0A - #define UART0_CONTROL UCSR0B - #define UART0_DATA UDR0 - #define UART0_UDRIE UDRIE0 - #define UART1_STATUS UCSR1A - #define UART1_CONTROL UCSR1B - #define UART1_DATA UDR1 - #define UART1_UDRIE UDRIE1 -#elif defined(__AVR_ATmega644__) - /* ATmega with one USART */ - #define ATMEGA_USART0 - #define UART0_RECEIVE_INTERRUPT SIG_USART_RECV - #define UART0_TRANSMIT_INTERRUPT SIG_USART_DATA - #define UART0_STATUS UCSR0A - #define UART0_CONTROL UCSR0B - #define UART0_DATA UDR0 - #define UART0_UDRIE UDRIE0 -#elif defined(__AVR_ATmega164P__) || defined(__AVR_ATmega324P__) || defined(__AVR_ATmega644P__) - /* ATmega with two USART */ - #define ATMEGA_USART0 - #define ATMEGA_USART1 - #define UART0_RECEIVE_INTERRUPT SIG_USART_RECV - #define UART1_RECEIVE_INTERRUPT SIG_USART1_RECV - #define UART0_TRANSMIT_INTERRUPT SIG_USART_DATA - #define UART1_TRANSMIT_INTERRUPT SIG_USART1_DATA - #define UART0_STATUS UCSR0A - #define UART0_CONTROL UCSR0B - #define UART0_DATA UDR0 - #define UART0_UDRIE UDRIE0 - #define UART1_STATUS UCSR1A - #define UART1_CONTROL UCSR1B - #define UART1_DATA UDR1 - #define UART1_UDRIE UDRIE1 -#else - #error "no UART definition for MCU available" -#endif - - -/* - * module global variables - */ -static volatile unsigned char UART_TxBuf[UART_TX_BUFFER_SIZE]; -static volatile unsigned char UART_RxBuf[UART_RX_BUFFER_SIZE]; -static volatile unsigned char UART_TxHead; -static volatile unsigned char UART_TxTail; -static volatile unsigned char UART_RxHead; -static volatile unsigned char UART_RxTail; -static volatile unsigned char UART_LastRxError; - -#if defined( ATMEGA_USART1 ) -static volatile unsigned char UART1_TxBuf[UART_TX_BUFFER_SIZE]; -static volatile unsigned char UART1_RxBuf[UART_RX_BUFFER_SIZE]; -static volatile unsigned char UART1_TxHead; -static volatile unsigned char UART1_TxTail; -static volatile unsigned char UART1_RxHead; -static volatile unsigned char UART1_RxTail; -static volatile unsigned char UART1_LastRxError; -#endif - - - -ISR(UART0_RECEIVE_INTERRUPT) -/************************************************************************* -Function: UART Receive Complete interrupt -Purpose: called when the UART has received a character -**************************************************************************/ -{ - unsigned char tmphead; - unsigned char data; - unsigned char usr; - unsigned char lastRxError; - - - /* read UART status register and UART data register */ - usr = UART0_STATUS; - data = UART0_DATA; - - /* */ -#if defined( AT90_UART ) - lastRxError = (usr & (_BV(FE)|_BV(DOR)) ); -#elif defined( ATMEGA_USART ) - lastRxError = (usr & (_BV(FE)|_BV(DOR)) ); -#elif defined( ATMEGA_USART0 ) - lastRxError = (usr & (_BV(FE0)|_BV(DOR0)) ); -#elif defined ( ATMEGA_UART ) - lastRxError = (usr & (_BV(FE)|_BV(DOR)) ); -#endif - - /* calculate buffer index */ - tmphead = ( UART_RxHead + 1) & UART_RX_BUFFER_MASK; - - if ( tmphead == UART_RxTail ) { - /* error: receive buffer overflow */ - lastRxError = UART_BUFFER_OVERFLOW >> 8; - }else{ - /* store new index */ - UART_RxHead = tmphead; - /* store received data in buffer */ - UART_RxBuf[tmphead] = data; - } - UART_LastRxError = lastRxError; -} - - -ISR(UART0_TRANSMIT_INTERRUPT) -/************************************************************************* -Function: UART Data Register Empty interrupt -Purpose: called when the UART is ready to transmit the next byte -**************************************************************************/ -{ - unsigned char tmptail; - - - if ( UART_TxHead != UART_TxTail) { - /* calculate and store new buffer index */ - tmptail = (UART_TxTail + 1) & UART_TX_BUFFER_MASK; - UART_TxTail = tmptail; - /* get one byte from buffer and write it to UART */ - UART0_DATA = UART_TxBuf[tmptail]; /* start transmission */ - }else{ - /* tx buffer empty, disable UDRE interrupt */ - UART0_CONTROL &= ~_BV(UART0_UDRIE); - } -} - - -/************************************************************************* -Function: uart_init() -Purpose: initialize UART and set baudrate -Input: baudrate using macro UART_BAUD_SELECT() -Returns: none -**************************************************************************/ -void uart_init(unsigned int baudrate) -{ - UART_TxHead = 0; - UART_TxTail = 0; - UART_RxHead = 0; - UART_RxTail = 0; - -#if defined( AT90_UART ) - /* set baud rate */ - UBRR = (unsigned char)baudrate; - - /* enable UART receiver and transmmitter and receive complete interrupt */ - UART0_CONTROL = _BV(RXCIE)|_BV(RXEN)|_BV(TXEN); - -#elif defined (ATMEGA_USART) - /* Set baud rate */ - if ( baudrate & 0x8000 ) - { - UART0_STATUS = (1<>8); - UBRRL = (unsigned char) baudrate; - - /* Enable USART receiver and transmitter and receive complete interrupt */ - UART0_CONTROL = _BV(RXCIE)|(1<>8); - UBRR0L = (unsigned char) baudrate; - - /* Enable USART receiver and transmitter and receive complete interrupt */ - UART0_CONTROL = _BV(RXCIE0)|(1<>8); - UBRR = (unsigned char) baudrate; - - /* Enable UART receiver and transmitter and receive complete interrupt */ - UART0_CONTROL = _BV(RXCIE)|(1<> 8; - }else{ - /* store new index */ - UART1_RxHead = tmphead; - /* store received data in buffer */ - UART1_RxBuf[tmphead] = data; - } - UART1_LastRxError = lastRxError; -} - - -ISR(UART1_TRANSMIT_INTERRUPT) -/************************************************************************* -Function: UART1 Data Register Empty interrupt -Purpose: called when the UART1 is ready to transmit the next byte -**************************************************************************/ -{ - unsigned char tmptail; - - - if ( UART1_TxHead != UART1_TxTail) { - /* calculate and store new buffer index */ - tmptail = (UART1_TxTail + 1) & UART_TX_BUFFER_MASK; - UART1_TxTail = tmptail; - /* get one byte from buffer and write it to UART */ - UART1_DATA = UART1_TxBuf[tmptail]; /* start transmission */ - }else{ - /* tx buffer empty, disable UDRE interrupt */ - UART1_CONTROL &= ~_BV(UART1_UDRIE); - } -} - - -/************************************************************************* -Function: uart1_init() -Purpose: initialize UART1 and set baudrate -Input: baudrate using macro UART_BAUD_SELECT() -Returns: none -**************************************************************************/ -void uart1_init(unsigned int baudrate) -{ - UART1_TxHead = 0; - UART1_TxTail = 0; - UART1_RxHead = 0; - UART1_RxTail = 0; - - - /* Set baud rate */ - if ( baudrate & 0x8000 ) - { - UART1_STATUS = (1<>8); - UBRR1L = (unsigned char) baudrate; - - /* Enable USART receiver and transmitter and receive complete interrupt */ - UART1_CONTROL = _BV(RXCIE1)|(1< http://jump.to/fleury -File: $Id: uart.h,v 1.8.2.1 2007/07/01 11:14:38 peter Exp $ -Software: AVR-GCC 4.1, AVR Libc 1.4 -Hardware: any AVR with built-in UART, tested on AT90S8515 & ATmega8 at 4 Mhz -License: GNU General Public License -Usage: see Doxygen manual - -LICENSE: - Copyright (C) 2006 Peter Fleury - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - -************************************************************************/ - -/** - * @defgroup pfleury_uart UART Library - * @code #include @endcode - * - * @brief Interrupt UART library using the built-in UART with transmit and receive circular buffers. - * - * This library can be used to transmit and receive data through the built in UART. - * - * An interrupt is generated when the UART has finished transmitting or - * receiving a byte. The interrupt handling routines use circular buffers - * for buffering received and transmitted data. - * - * The UART_RX_BUFFER_SIZE and UART_TX_BUFFER_SIZE constants define - * the size of the circular buffers in bytes. Note that these constants must be a power of 2. - * You may need to adapt this constants to your target and your application by adding - * CDEFS += -DUART_RX_BUFFER_SIZE=nn -DUART_RX_BUFFER_SIZE=nn to your Makefile. - * - * @note Based on Atmel Application Note AVR306 - * @author Peter Fleury pfleury@gmx.ch http://jump.to/fleury - */ - -/**@{*/ - - -#if (__GNUC__ * 100 + __GNUC_MINOR__) < 304 -#error "This library requires AVR-GCC 3.4 or later, update to newer AVR-GCC compiler !" -#endif - - -/* -** constants and macros -*/ - -/** @brief UART Baudrate Expression - * @param xtalcpu system clock in Mhz, e.g. 4000000L for 4Mhz - * @param baudrate baudrate in bps, e.g. 1200, 2400, 9600 - */ -#define UART_BAUD_SELECT(baudRate,xtalCpu) ((xtalCpu)/((baudRate)*16l)-1) - -/** @brief UART Baudrate Expression for ATmega double speed mode - * @param xtalcpu system clock in Mhz, e.g. 4000000L for 4Mhz - * @param baudrate baudrate in bps, e.g. 1200, 2400, 9600 - */ -#define UART_BAUD_SELECT_DOUBLE_SPEED(baudRate,xtalCpu) (((xtalCpu)/((baudRate)*8l)-1)|0x8000) - - -/** Size of the circular receive buffer, must be power of 2 */ -#ifndef UART_RX_BUFFER_SIZE -#define UART_RX_BUFFER_SIZE 32 -#endif -/** Size of the circular transmit buffer, must be power of 2 */ -#ifndef UART_TX_BUFFER_SIZE -#define UART_TX_BUFFER_SIZE 32 -#endif - -/* test if the size of the circular buffers fits into SRAM */ -#if ( (UART_RX_BUFFER_SIZE+UART_TX_BUFFER_SIZE) >= (RAMEND-0x60 ) ) -#error "size of UART_RX_BUFFER_SIZE + UART_TX_BUFFER_SIZE larger than size of SRAM" -#endif - -/* -** high byte error return code of uart_getc() -*/ -#define UART_FRAME_ERROR 0x0800 /* Framing Error by UART */ -#define UART_OVERRUN_ERROR 0x0400 /* Overrun condition by UART */ -#define UART_BUFFER_OVERFLOW 0x0200 /* receive ringbuffer overflow */ -#define UART_NO_DATA 0x0100 /* no receive data available */ - - -/* -** function prototypes -*/ - -/** - @brief Initialize UART and set baudrate - @param baudrate Specify baudrate using macro UART_BAUD_SELECT() - @return none -*/ -extern void uart_init(unsigned int baudrate); - - -/** - * @brief Get received byte from ringbuffer - * - * Returns in the lower byte the received character and in the - * higher byte the last receive error. - * UART_NO_DATA is returned when no data is available. - * - * @param void - * @return lower byte: received byte from ringbuffer - * @return higher byte: last receive status - * - \b 0 successfully received data from UART - * - \b UART_NO_DATA - *
no receive data available - * - \b UART_BUFFER_OVERFLOW - *
Receive ringbuffer overflow. - * We are not reading the receive buffer fast enough, - * one or more received character have been dropped - * - \b UART_OVERRUN_ERROR - *
Overrun condition by UART. - * A character already present in the UART UDR register was - * not read by the interrupt handler before the next character arrived, - * one or more received characters have been dropped. - * - \b UART_FRAME_ERROR - *
Framing Error by UART - */ -extern unsigned int uart_getc(void); - - -/** - * @brief Put byte to ringbuffer for transmitting via UART - * @param data byte to be transmitted - * @return none - */ -extern void uart_putc(unsigned char data); - - -/** - * @brief Put string to ringbuffer for transmitting via UART - * - * The string is buffered by the uart library in a circular buffer - * and one character at a time is transmitted to the UART using interrupts. - * Blocks if it can not write the whole string into the circular buffer. - * - * @param s string to be transmitted - * @return none - */ -extern void uart_puts(const char *s ); - - -/** - * @brief Put string from program memory to ringbuffer for transmitting via UART. - * - * The string is buffered by the uart library in a circular buffer - * and one character at a time is transmitted to the UART using interrupts. - * Blocks if it can not write the whole string into the circular buffer. - * - * @param s program memory string to be transmitted - * @return none - * @see uart_puts_P - */ -extern void uart_puts_p(const char *s ); - -/** - * @brief Macro to automatically put a string constant into program memory - */ -#define uart_puts_P(__s) uart_puts_p(PSTR(__s)) - - - -/** @brief Initialize USART1 (only available on selected ATmegas) @see uart_init */ -extern void uart1_init(unsigned int baudrate); -/** @brief Get received byte of USART1 from ringbuffer. (only available on selected ATmega) @see uart_getc */ -extern unsigned int uart1_getc(void); -/** @brief Put byte to ringbuffer for transmitting via USART1 (only available on selected ATmega) @see uart_putc */ -extern void uart1_putc(unsigned char data); -/** @brief Put string to ringbuffer for transmitting via USART1 (only available on selected ATmega) @see uart_puts */ -extern void uart1_puts(const char *s ); -/** @brief Put string from program memory to ringbuffer for transmitting via USART1 (only available on selected ATmega) @see uart_puts_p */ -extern void uart1_puts_p(const char *s ); -/** @brief Macro to automatically put a string constant into program memory */ -#define uart1_puts_P(__s) uart1_puts_p(PSTR(__s)) - -/**@}*/ - -#include "uart.c" -#endif // UART_H - diff --git a/AVR/lib/RF24/util.c b/AVR/lib/RF24/util.c deleted file mode 100644 index 39bbd1e..0000000 --- a/AVR/lib/RF24/util.c +++ /dev/null @@ -1,62 +0,0 @@ -/* - Copyright (C) 2012 jaseg - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - version 3 as published by the Free Software Foundation. - */ - -#include "util.h" -#include "uart.h" - -void uart_puthex_nibble(uint8_t nibble){ - if(nibble < 0xA) - uart_putc('0'+nibble); - else - uart_putc('A'+nibble-0xA); -} - -void uart_puthex(uint8_t data){ - uart_puthex_nibble(data>4); - uart_puthex_nibble(data&0xF); -} - -void uart_puthex_16(uint16_t data){ - uart_puthex(data>>8); - uart_puthex(data&0xFF); -} - -void uart_puthex_flip_16(uint16_t data){ - uart_puthex(data&0xFF); - uart_puthex(data>>8); -} - -void uart_puthex_32(uint32_t data){ - uint16_t high = data>>16; - uart_puthex_16(high); - uint16_t low = data&0xFFFF; - uart_puthex_16(low); -} - -void uart_puthex_flip_32(uint32_t data){ - uint16_t low = data&0xFFFF; - uart_puthex_flip_16(low); - uint16_t high = data>>16; - uart_puthex_flip_16(high); -} - -void uart_putdec(uint8_t data){ - if(data >= 100){ - if(data >= 200){ - uart_putc('2'); - data -= 200; - }else{ - uart_putc('1'); - data -= 100; - } - } - uint8_t d2 = data/10; - data %= 10; - uart_putc('0'+d2); - uart_putc('0'+data); -} diff --git a/AVR/lib/RF24/util.h b/AVR/lib/RF24/util.h deleted file mode 100644 index d54e8a1..0000000 --- a/AVR/lib/RF24/util.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - Copyright (C) 2012 jaseg - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - version 3 as published by the Free Software Foundation. - */ - -#ifndef __UTIL_H__ -#define __UTIL_H__ -#include - -void uart_puthex_nibble(uint8_t nibble); -void uart_puthex(uint8_t data); -void uart_puthex_16(uint16_t data); -void uart_puthex_32(uint32_t data); -void uart_puthex_flip_16(uint16_t data); -void uart_puthex_flip_32(uint32_t data); -void uart_putdec(uint8_t data); -inline uint8_t min(uint8_t a, uint8_t b){ - return a>b?b:a; -} - -#endif//__UTIL_H__ diff --git a/AVR/lib/RF24/wikidoc.xslt b/AVR/lib/RF24/wikidoc.xslt deleted file mode 100644 index b94d3ef..0000000 --- a/AVR/lib/RF24/wikidoc.xslt +++ /dev/null @@ -1,41 +0,0 @@ - - - - - - - - === === - - - - - '''' - -Parameters: - - - - * '''': - - - - - -Returns: - -* - - -Warning: - - - - <pre> </pre> - - - - - - - diff --git a/AVR/lib/Vera/VeraAVR.c b/AVR/lib/Vera/VeraAVR.c deleted file mode 100644 index 564cf05..0000000 --- a/AVR/lib/Vera/VeraAVR.c +++ /dev/null @@ -1,252 +0,0 @@ -/* - Vera Arduino library is used to communicate sensor data to your Vera receiver sketch using RF24 library. - The maximum amount of transferrable data is 336 characters from a sensor to receiver. - - Created by Henrik Ekblad - Version 1.0 - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - version 2 as published by the Free Software Foundation. - - modification by axillent@gmail.com to run on pure AVR - */ - -#include "VeraAVR.h" -#include -#include -#include - -uint8_t ee_radio_id EEMEM = 255; - -struct { - uint16_t radioId; - uint16_t relayId; - message_s msg; // Buffer for incoming messages. - char convBuffer[20]; -} _veraavr_data; - -/*uint8_t VeraAVR_eeprom_radioid() { - return eeprom_read_byte(&ee_radio_id); -}*/ -/*static void VeraAVR_delay_ms(uint16_t delay) { - for(; delay >= 50; delay -= 50) { - _delay_ms(50); - wdt_reset(); - } - wdt_reset(); -}*/ - -void VeraAVR_begin(uint16_t _radioId) { - VeraAVR_begin2(_radioId, GATEWAY_ADDRESS); -} - -void VeraAVR_begin2(uint16_t _radioId, uint16_t _relayId) { - _veraavr_data.radioId = _radioId; - _veraavr_data.relayId = _relayId; - // Start up the radio library - nrf24_begin(); - nrf24_enableDynamicPayloads(); - nrf24_setAutoAck(1) ; - nrf24_setRetries(15, 15); - nrf24_setChannel(VERA_CHANNEL); - nrf24_setDataRate(RF24_1MBPS); - nrf24_setCRCLength(RF24_CRC_16); - if (_veraavr_data.radioId == GATEWAY_ADDRESS) { - nrf24_openReadingPipe(1, BASE_RADIO_ID); - } else { - if (_veraavr_data.radioId == AUTO) { - _veraavr_data.radioId = eeprom_read_byte(&ee_radio_id); - if (_veraavr_data.radioId == 0xFFF || _veraavr_data.radioId == 0x00) { - // No radio id has been fetched yet. EEPROM is unwritten. - // Request new id from Vera. Use radio address 255 temporarily. - //nrf24_openReadingPipe(0,0); // Don't listen to other nodes - nrf24_openReadingPipe(1, BASE_RADIO_ID+_veraavr_data.radioId); - nrf24_openWritingPipe(BASE_RADIO_ID); - _veraavr_data.radioId = atoi(VeraAVR_getConfiguration(V_REQUEST_ID)); - // Write id to EEPROM - if (_veraavr_data.radioId == AUTO) { // Vera will return 255 if all sensor id are taken - // wait a minute before possible wdt reset - for(uint8_t i=0; i < 120; i++) { - wdt_reset(); - _delay_ms(500); - } - // wait for a while ot until wdt reset - while (1) {} - } else { - eeprom_write_byte(&ee_radio_id, _veraavr_data.radioId); - } - } - } - //eeprom_write_byte(&ee_radio_id, _veraavr_data.radioId); - nrf24_openReadingPipe(1, BASE_RADIO_ID+_veraavr_data.radioId); - } - nrf24_startListening(); - wdt_reset(); -} - -uint8_t VeraAVR_sendDataGW(uint8_t childId, messageType messageType, uint8_t type, const char *data) { - return VeraAVR_sendData(_veraavr_data.radioId, _veraavr_data.relayId, GATEWAY_ADDRESS, childId, messageType, type, data); -} - -uint8_t VeraAVR_sendData(uint16_t from, uint16_t next, uint16_t to, uint8_t childId, messageType messageType, uint8_t type, const char *data) { - uint8_t ok = 0; - if (strlen(data) < sizeof(_veraavr_data.msg.data)) { - _veraavr_data.msg.header.version = PROTOCOL_VERSION; - _veraavr_data.msg.header.binary = 0; - _veraavr_data.msg.header.from = from; - _veraavr_data.msg.header.to = to; - _veraavr_data.msg.header.childId = childId; - _veraavr_data.msg.header.messageType = messageType; - _veraavr_data.msg.header.type = type; - - strncpy(_veraavr_data.msg.data, data, sizeof(_veraavr_data.msg.data)-1); - _veraavr_data.msg.header.crc = VeraAVR_crc8Message(_veraavr_data.msg); - - - nrf24_stopListening(); - nrf24_openWritingPipe(BASE_RADIO_ID + next); - uint8_t retry = 5; - do { - ok = nrf24_write(&_veraavr_data.msg, min(MAX_MESSAGE_LENGTH, sizeof(_veraavr_data.msg.header) + strlen(_veraavr_data.msg.data) + 1)); - wdt_reset(); - } - while ( !ok && --retry ); - nrf24_startListening(); - } - return ok; -} - -void VeraAVR_sendVariable_char(uint8_t childId, uint8_t variableType, - const char *value) { - VeraAVR_sendDataGW(childId, M_VARIABLE, variableType, value); -} - -void VeraAVR_sendVariable_float(uint8_t childId, uint8_t variableType, float value, int decimals) { - VeraAVR_sendVariable_char(childId, variableType, dtostrf(value,2,decimals,_veraavr_data.convBuffer)); -} - -void VeraAVR_sendVariable_int(uint8_t childId, uint8_t variableType, int value) { - VeraAVR_sendVariable_char(childId, variableType, itoa(value, _veraavr_data.convBuffer, 10)); -} -void VeraAVR_sendVariable_long(uint8_t childId, uint8_t variableType, long value) { - VeraAVR_sendVariable_char(childId, variableType, ltoa(value, _veraavr_data.convBuffer, 10)); -} - -void VeraAVR_requestStatus(uint8_t childId, uint8_t variableType) { - VeraAVR_sendDataGW(childId, M_STATUS, variableType, ""); -} - -char* VeraAVR_getStatus(uint8_t childId, uint8_t variableType) { - while (1) { - VeraAVR_requestStatus(childId, variableType); - uint8_t i = 0; - while (i < 100) { // 5 seconds timeout before re-sending status request - while (VeraAVR_messageAvailable()) { - // Check that it is right type of message and not a routing message - if ((_veraavr_data.msg.header.messageType == M_REQUEST_STATUS_RESPONSE) && - (_veraavr_data.msg.header.type == variableType) && - (_veraavr_data.msg.header.to == childId)) { - return _veraavr_data.msg.data; - } - } - _delay_ms(50); - wdt_reset(); - i++; - } - } - return NULL; -} - -void VeraAVR_requestConfiguration(uint8_t variableType) { - VeraAVR_requestStatus(NODE_CHILD_ID, variableType); -} - -char* VeraAVR_getConfiguration(uint8_t variableType) { - return VeraAVR_getStatus(NODE_CHILD_ID, variableType); -} - -unsigned long VeraAVR_getTime() { - return atol(VeraAVR_getConfiguration(V_TIME)); -} - -void VeraAVR_sendSensorPresentation(uint8_t childId, uint8_t sensorType) { - VeraAVR_sendDataGW(childId, M_PRESENTATION, sensorType, LIBRARY_VERSION); -} - - -uint8_t VeraAVR_messageAvailable() { - while (nrf24_available()) { - VeraAVR_readMessage(); - // Check that message was addressed for me. Could be a message from some other sensor - // as we«re automatically listening to pipe 0 (our writing pipe) where all sensors - // send their data - if (_veraavr_data.msg.header.to == _veraavr_data.radioId && VeraAVR_validate() == VALIDATE_OK) - return 1; - wdt_reset(); - } - return 0; -} - - -message_s VeraAVR_waitForMessage() { - while (1) { - if (VeraAVR_messageAvailable()) { - return _veraavr_data.msg; - } - wdt_reset(); - } -} - -message_s VeraAVR_getMessage() { - return _veraavr_data.msg; -} - - -message_s VeraAVR_readMessage() { - uint8_t len = nrf24_getDynamicPayloadSize(); - //uint8_t done = - nrf24_read(&_veraavr_data.msg, len); - // Make sure string gets terminated ok. - _veraavr_data.msg.data[sizeof(_veraavr_data.msg.data)-1] = '\0'; - return _veraavr_data.msg; -} - -/* - * calculate CRC8 on message_s data taking care of data structure and protocol version - */ -uint8_t VeraAVR_crc8Message(message_s var_msg) { - struct { - message_s msg; - uint8_t protocol_version; - } crc_data; - memcpy(&crc_data, &var_msg, sizeof(var_msg)); - crc_data.protocol_version = PROTOCOL_VERSION; - // some clean up needed for repeated result - crc_data.msg.header.crc = 0; - // fill unused space by zeroes for string data only - if(!crc_data.msg.header.binary) { - uint8_t len = strlen(crc_data.msg.data); - if(len < sizeof(crc_data.msg.data)-1) { - memset(&crc_data.msg.data[len], 0, sizeof(crc_data.msg.data) - 1 - len); - } - } - return crc8((uint8_t*)&crc_data, (uint8_t)sizeof(crc_data)); -} -/* - * true if message is consistent * - */ -uint8_t VeraAVR_checkCRCMessage(message_s var_msg) { - return (var_msg.header.crc == VeraAVR_crc8Message(var_msg))?1:0; -} -uint8_t VeraAVR_checkCRC() { - return VeraAVR_checkCRCMessage(_veraavr_data.msg); -} - -uint8_t VeraAVR_validate() { - uint8_t crc_check = VeraAVR_checkCRC(); - uint8_t version_check = (_veraavr_data.msg.header.version == PROTOCOL_VERSION); - if(crc_check && version_check) return VALIDATE_OK; - if(!crc_check) return VALIDATE_BAD_CRC; - return VALIDATE_BAD_VERSION; -} diff --git a/AVR/lib/Vera/VeraAVR.h b/AVR/lib/Vera/VeraAVR.h deleted file mode 100644 index f6fb3a9..0000000 --- a/AVR/lib/Vera/VeraAVR.h +++ /dev/null @@ -1,157 +0,0 @@ -/* - Vera Arduino library is used to communicate sensor data to your Vera receiver sketch using RF24 library. - - Created by Henrik Ekblad - Version 1.0 - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - version 2 as published by the Free Software Foundation. - - modification by axillent@gmail.com to run on pure AVR - - before running this you need to configure properly RF24-avrlib -*/ - -#ifndef Vera_h -#define Vera_h - -#include -#include -#include -#include - -#define LIBRARY_VERSION "1.2+" -#define PROTOCOL_VERSION 1 -#define BAUD_RATE 115200 -#define AUTO 0xFFF // Id 4095 is reserved for auto initialization of radioId. -#define NODE_CHILD_ID 0xFF // Node child id is always created for when a new sensor is detected - -#define VERA_CHANNEL 76 - -// This is the radioId for Vera receiver sketch (where all sensors should send their data). -// This is also act as base value for sensor radioId -#define BASE_RADIO_ID 0xABCDABC000LL -#define GATEWAY_ADDRESS ((uint16_t)0) - -#define MAX_MESSAGE_LENGTH 32 - -#define CRC8INIT 0x00 -#define CRC8POLY 0x18 //0X18 = X^8+X^5+X^4+X^0 - -typedef enum { M_PRESENTATION = 0, M_VARIABLE, M_STATUS, M_CUSTOM, M_GATEWAY_MESSAGE, M_REQUEST_STATUS_RESPONSE } messageType; - -// Adding new variable- and device types should be done at the end of enum -typedef enum { V_TEMP,V_HUM, V_LIGHT, V_DIMMER, V_PRESSURE, V_FORECAST, V_RAIN, V_RAINRATE, V_WIND, V_GUST, - V_DIRECTION, V_UV, V_WEIGHT, V_DISTANCE, V_IMPEDANCE, V_BATTERY_LEVEL, V_BATTERY_DATE, - V_ARMED, V_TRIPPED, V_LAST_TRIP, V_WATT, V_KWH, V_SCENE_ON, V_SCENE_OFF, V_HEATER, - V_HEATER_SW, V_LIGHT_LEVEL, V_VAR1, V_VAR2, V_VAR3, V_VAR4, V_VAR5, V_TIME, V_VERSION, - V_REQUEST_ID, V_INCLUSION_MODE, V_INCLUSION_COUNT, V_INCLUSION_RESULT, V_NEIGHBORS, - V_RELAY_MODE, V_LAST_UPDATE} variable; - -typedef enum { S_DOOR, S_MOTION, S_SMOKE, S_LIGHT, S_DIMMER, S_COVER, S_TEMP, S_HUM, S_BARO, S_WIND, - S_RAIN, S_UV, S_WEIGHT, S_POWER, S_HEATER, S_DISTANCE, S_LIGHT_LEVEL, S_ARDUINO_NODE} senosr; - -// result of validate() -enum { VALIDATE_OK=0, VALIDATE_BAD_CRC, VALIDATE_BAD_VERSION }; - - -typedef struct { - uint8_t crc : 8; // 8 bits crc - uint8_t version : 3; // 3 bits protocol version - uint8_t binary : 1; // 1 bit. Data is binary and should be encoded when sent to vera - uint16_t from : 12; // 12 bits. RadioId of sender node - uint16_t to : 12; // 12 bits. RadioId of destination node - uint8_t childId : 8; // 1 byte. Up to MAX_CHILD_DEVICES child sensors per radioId - uint8_t messageType : 4; // 4 bits. Type of message. See messageType - uint8_t type : 8; // 8 bits. variableType or deviceType depending on messageType -} header_s; - -typedef struct { - header_s header; - char data[MAX_MESSAGE_LENGTH - sizeof(header_s) + 1]; // Each message can transfer a payload. Add one extra byte for \0 -} message_s; - - - -/** -* Begin operation of the vera library -* -* Call this in setup(), before calling any other vera library methods. -*/ -void VeraAVR_begin(uint16_t _radioId); -void VeraAVR_begin2(uint16_t _radioId, uint16_t _relayId); - -/** -* Sends a variable change to vera -* -* @param childId The child id for which to update variable. Value can be 0-127. -* @param variableType The variableType to update -* @param value New value of the variable -*/ -void VeraAVR_sendVariable_char (uint8_t childId, uint8_t variableType, const char *value); -void VeraAVR_sendVariable_float (uint8_t childId, uint8_t variableType, float value, int decimals); -void VeraAVR_sendVariable_long(uint8_t childId, uint8_t variableType, long value); -void VeraAVR_sendVariable_int(uint8_t childId, uint8_t variableType, int value); - -/** -* Requests status for a vera variable (sent from an actuator) -* -* @param childId The unique child id for the different sensors connected to this arduino. 0-127. -* @param variableType The variableType to update -*/ -void VeraAVR_requestStatus (uint8_t childId, uint8_t variableType); - -/** -* Requests configuration parameter -* -* @param variableType The variableType to fetch -*/ -void VeraAVR_requestConfiguration(uint8_t variableType); -char * VeraAVR_getConfiguration(uint8_t variableType); -/** - * Fetches time from vera - */ -unsigned long VeraAVR_getTime(); -/* -* The arduino must send a presentation of all the sensors connected before any variable changes will be registrered on Vera side. -* Usually it's good to present all sensors when Arduino starts up (setup). -* Waits until all data has been transmitted and acknowledged by Vera receiver (retries RESEND_PRESENTATION times). -* -* @param childId The unique child id for the different sensors connected to this arduino. 0-254. -* @param sensorType Sensor types to create. They will be numbered from 0 up to 127. -*/ -void VeraAVR_sendSensorPresentation (uint8_t childId, uint8_t sensorType); - -/** -* Registers this arduino device as a relay. This requires this node to call -* api methods regularly to relay messages that could be passing this node and -* answer to any neighbor-discovery messages. -* Basically all api methods relays messages (waitForMessage, messageAvailable, ..) -* When this method is called vera will be informed that this node acts as relay. -*/ -void VeraAVR_registerNodeAsRelay(); -/** -* Busy waits until there is a message available to be read (used for actuators, like relays) -*/ -message_s VeraAVR_waitForVeraMessage(void); -/** -* Returns true if there is a message addressed for this node is available to be read (used by VeraGateway) -*/ -uint8_t VeraAVR_messageAvailable(); - /** - * Returns the last received message - */ -message_s VeraAVR_getMessage(); -uint8_t sendData(uint16_t from, uint16_t next, uint16_t to, uint8_t childId, messageType messageType, uint8_t type, const char *data); -uint8_t VeraAVR_validate(); -uint8_t VeraAVR_crc8Message(message_s); -uint8_t VeraAVR_checkCRCMessage(message_s); -uint8_t VeraAVR_checkCRC(); -message_s VeraAVR_readMessage(void); -uint8_t VeraAVR_sendDataGW(uint8_t childId, messageType messageType, uint8_t type, const char *data); -uint8_t VeraAVR_sendData(uint16_t from, uint16_t next, uint16_t to, uint8_t childId, messageType messageType, uint8_t type, const char *data); - -#include "VeraAVR.c" - -#endif diff --git a/AVR/lib/crc8/crc8.c b/AVR/lib/crc8/crc8.c deleted file mode 100644 index 6a0fc00..0000000 --- a/AVR/lib/crc8/crc8.c +++ /dev/null @@ -1,63 +0,0 @@ -/* please read copyright-notice at EOF */ - -#include - -#define CRC8INIT 0x00 -#define CRC8POLY 0x18 //0X18 = X^8+X^5+X^4+X^0 - -uint8_t crc8( uint8_t *data, uint16_t number_of_bytes_in_data ) -{ - uint8_t crc; - uint16_t loop_count; - uint8_t bit_counter; - uint8_t b; - uint8_t feedback_bit; - - crc = CRC8INIT; - - for (loop_count = 0; loop_count != number_of_bytes_in_data; loop_count++) - { - b = data[loop_count]; - - bit_counter = 8; - do { - feedback_bit = (crc ^ b) & 0x01; - - if ( feedback_bit == 0x01 ) { - crc = crc ^ CRC8POLY; - } - crc = (crc >> 1) & 0x7F; - if ( feedback_bit == 0x01 ) { - crc = crc | 0x80; - } - - b = b >> 1; - bit_counter--; - - } while (bit_counter > 0); - } - - return crc; -} - -/* -This code is from Colin O'Flynn - Copyright (c) 2002 -only minor changes by M.Thomas 9/2004 - -Permission is hereby granted, free of charge, to any person obtaining a copy of -this software and associated documentation files (the "Software"), to deal in -the Software without restriction, including without limitation the rights to -use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of -the Software, and to permit persons to whom the Software is furnished to do so, -subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS -FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR -COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER -IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN -CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. -*/ diff --git a/AVR/lib/crc8/crc8.h b/AVR/lib/crc8/crc8.h deleted file mode 100644 index 1b27cd4..0000000 --- a/AVR/lib/crc8/crc8.h +++ /dev/null @@ -1,42 +0,0 @@ -#ifndef CRC8_H_ -#define CRC8_H_ - -#ifdef __cplusplus -extern "C" { -#endif - -#include - -uint8_t crc8( uint8_t* data, uint16_t number_of_bytes_in_data ); - -#ifdef __cplusplus -} -#endif - -#include "crc8.c" - -#endif - -/* -This is based on code from : - -Copyright (c) 2002 Colin O'Flynn - -Permission is hereby granted, free of charge, to any person obtaining a copy of -this software and associated documentation files (the "Software"), to deal in -the Software without restriction, including without limitation the rights to -use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of -the Software, and to permit persons to whom the Software is furnished to do so, -subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS -FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR -COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER -IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN -CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. -*/ - diff --git a/AVR/lib/spi/Arduino/DS1305/ds1305.c b/AVR/lib/spi/Arduino/DS1305/ds1305.c deleted file mode 100644 index fbafeb4..0000000 --- a/AVR/lib/spi/Arduino/DS1305/ds1305.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * Copyright (c) 2009 Andrew Smallbone - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - */ - -#include - -#ifdef __cplusplus -extern "C"{ -#endif - -unsigned char ds1305_transfer(unsigned char address, unsigned char data) -{ - select_ds1305(); - send_spi(address); - unsigned char out = send_spi(data); - deselect_ds1305(); - return out; -} - -void ds1305_write_block(unsigned char address, unsigned char *data, int length) -{ - select_ds1305(); - send_spi(address+DS1305_WRITE); - int i; - for (i=0; i - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - */ -#ifndef _ds1305_h__ -#define _ds1305_h__ - -#include - -#ifdef __cplusplus -extern "C"{ -#endif - -// these should be defined to the operation used to select/deselect the DS1305 -void select_ds1305(void); -void deselect_ds1305(void); - -#define DS1305_WRITE 0x80 -#define DS1305_TIME 0x00 -#define DS1305_ALARM0 0x07 -#define DS1305_ALARM1 0x0B -#define DS1305_CONTROL 0x0F -#define DS1305_STATUS 0x010 -#define DS1305_CHARGER 0x11 -#define DS1305_USERRAM 0x20 - -#define DS1305_ALARM_SET 0x80 - -// send the address and a byte and returns the byte returned by the DS1305 -unsigned char ds1305_transfer(unsigned char address, unsigned char data); -// write a block of bytes - will add 0x80 to the address -void ds1305_write_block(unsigned char address, unsigned char *data, int length); -// read a block of bytes -void ds1305_read_block(unsigned char address, unsigned char *data, int length); - -typedef struct _DS1305_DATETIME -{ - unsigned char seconds; - unsigned char minutes; - unsigned char hours; - unsigned char dayofweek; - unsigned char date; - unsigned char month; - unsigned char year; -} DS1305_DATETIME; - -/* set/get the current time/date passed the address of a DS1305_DATETIME struct - To set the current time/date to "20:11:32 Sunday 29/07/2009" - DS1305_DATETIME current = {0x32, 0x11, 0x20, 0x01, 0x29, 0x05, 0x09}; - set_time(¤t); -*/ -#define set_time(datetime) ds1305_write_block(DS1305_TIME, (unsigned char *)datetime, 7) -#define get_time(datetime) ds1305_read_block(DS1305_TIME, (unsigned char *)datetime, 7) - -/* set/get the time of alarm0/alarm1 passed the address of a DS1305_DATETIME struct, - although only the seconds/minutes/hours/dayofweek are sent/received -*/ -#define set_alarm0(time) ds1305_write_block(DS1305_ALARM0, (unsigned char *)time, 4) -#define get_alarm0(time) ds1305_read_block(DS1305_ALARM0, (unsigned char *)time, 4) -#define set_alarm1(time) ds1305_write_block(DS1305_ALARM1, (unsigned char *)time, 4) -#define get_alarm1(time) ds1305_read_block(DS1305_ALARM1, (unsigned char *)time, 4) - -// flags used in set_control/get_control -#define DS1305_EOSC 0x80 // enable oscillator, note this is inverse of ^EOSC bit value on chip -#define DS1305_WP 0x40 // write protect -#define DS1305_INTCN 0x04 // enable interrupts -#define DS1305_AIE1 0x02 // alarm0 interrupt enable -#define DS1305_AIE0 0x01 // alarm1 interrupt enable - -/* get/set the control register. To enable the oscillator, turn on write protection - and enable all interrupts the following would be used: - set_control(DS1305_EOSC | DS1305_WP | DS1305_INTCN | DS1305_AIE1 | DS1305_AIE0); -*/ -#define set_control(data) ds1305_transfer(DS1305_CONTROL+DS1305_WRITE, (data) ^ DS1305_EOSC) -#define get_control(data) (ds1305_transfer(DS1305_CONTROL, 0xFF) ^ DS1305_EOSC) - -// flags used in get_status -#define DS1305_IRQF0 0x01 // interrupt 0 request flag - current time has matched alarm 0 -#define DS1305_IRQF1 0x02 // interrupt 1 request flag - current time has matched alarm 1 -#define get_status(data) ds1305_transfer(DS1305_STATUS, 0xFF) - -// flags used in set_charger/get_charger -#define DS1305_CHARGER_OFF 0x5C // no charge - don't combine with other values -#define DS1305_CHARGER_1D2K 0xA5 // 1 diode 2K resistor -#define DS1305_CHARGER_1D4K 0xA6 // 1 diode 4K resistor -#define DS1305_CHARGER_1D8K 0xA7 // 1 diode 8K resistor -#define DS1305_CHARGER_2D2K 0xA1 // 2 diode 2K resistor -#define DS1305_CHARGER_2D4K 0xA2 // 2 diode 4K resistor -#define DS1305_CHARGER_2D8K 0xA3 // 2 diode 8K resistor -/* get/set the charger register */ -#define set_charger(data) ds1305_transfer(DS1305_CHARGE+DS1305_WRITE, data) -#define get_charger(data) ds1305_transfer(DS1305_CHARGE, 0xFF) - -#ifdef __cplusplus -} // extern "C" -#endif - -#endif diff --git a/AVR/lib/spi/Arduino/DS1305/keywords.txt b/AVR/lib/spi/Arduino/DS1305/keywords.txt deleted file mode 100644 index bfaf490..0000000 --- a/AVR/lib/spi/Arduino/DS1305/keywords.txt +++ /dev/null @@ -1,53 +0,0 @@ -####################################### -# Syntax Coloring Map For SPI -####################################### - -####################################### -# Datatypes (KEYWORD1) -####################################### -DS1305_DATETIME KEYWORD1 - -####################################### -# Methods and Functions (KEYWORD2) -####################################### - -select_ds1305 KEYWORD2 -deselect_ds1305 KEYWORD2 -set_time KEYWORD2 -get_time KEYWORD2 -set_control KEYWORD2 -get_control KEYWORD2 -set_charger KEYWORD2 -get_charger KEYWORD2 -get_alarm0 KEYWORD2 -set_alarm1 KEYWORD2 -get_alarm1 KEYWORD2 -get_status KEYWORD2 - -####################################### -# Constants KEYWORD2 -####################################### -DS1305_WRITE LITERAL1 -DS1305_TIME LITERAL1 -DS1305_ALARM0 LITERAL1 -DS1305_ALARM1 LITERAL1 -DS1305_CONTROL LITERAL1 -DS1305_STATUS LITERAL1 -DS1305_CHARGER LITERAL1 -DS1305_USERRAM LITERAL1 -DS1305_ALARM_SET LITERAL1 -DS1305_EOSC LITERAL1 -DS1305_WP LITERAL1 -DS1305_INTCN LITERAL1 -DS1305_AIE1 LITERAL1 -DS1305_AIE0 LITERAL1 -DS1305_IRQF0 LITERAL1 -DS1305_IRQF1 LITERAL1 -DS1305_CHARGER_OFF LITERAL1 -DS1305_CHARGER_1D2K LITERAL1 -DS1305_CHARGER_1D4K LITERAL1 -DS1305_CHARGER_1D8K LITERAL1 -DS1305_CHARGER_2D2K LITERAL1 -DS1305_CHARGER_2D4K LITERAL1 -DS1305_CHARGER_2D8K LITERAL1 - diff --git a/AVR/lib/spi/Arduino/SPI/examples/DS1305_Alarm/DS1305_Alarm.pde b/AVR/lib/spi/Arduino/SPI/examples/DS1305_Alarm/DS1305_Alarm.pde deleted file mode 100644 index 601672a..0000000 --- a/AVR/lib/spi/Arduino/SPI/examples/DS1305_Alarm/DS1305_Alarm.pde +++ /dev/null @@ -1,79 +0,0 @@ -#include -#include - -#define DS1305_PIN 4 -#define LED_PIN 3 - -// following two methods required by DS1305 library to select/deselect device -void select_ds1305(void) -{ - digitalWrite(DS1305_PIN, HIGH); -} - -void deselect_ds1305(void) -{ - digitalWrite(DS1305_PIN, LOW); -} - -// flash led that's connected to pin 3 -void flash_led(void) -{ - pinMode(LED_PIN, OUTPUT); - for (int i=0; i<10; i++) { - digitalWrite(LED_PIN, i%2==0); - delay(50); - } -} - -// called when pin INT0 goes from 1 to 0 -ISR(INT0_vect) -{ - // get alarm value to clear alarm interrupt flag on DS1305 - DS1305_DATETIME alarm; - get_alarm0(&alarm); - flash_led(); -} - -void setup() -{ - // flash LED at start to indicate were about to start - flash_led(); - flash_led(); - - // pin used to enable DS1305 - pinMode(DS1305_PIN, OUTPUT); - - // Make sure ADC is unselected and setup spi - deselect_ds1305(); - setup_spi(SPI_MODE_1, SPI_MSB, SPI_NO_INTERRUPT, SPI_MSTR_CLK16); - set_control(0); - - // set current date/time to Thursday 06/05/09 20:32:30 - DS1305_DATETIME current = {0x30, 0x32, 0x20, 0x05, 0x06, 0x05, 0x09}; - set_time(¤t); - - // change the value of alarm to the required time/granularity: - // raise alarm every day (at 20:32:00): - // DS1305_DATETIME alarm = {0x00, 0x32, 0x20, 0x00 | DS1305_ALARM_SET}; - // raise alarm every minute (when seconds = 00): - // DS1305_DATETIME alarm = {0x00, 0x32 | DS1305_ALARM_SET, - // 0x20 | DS1305_ALARM_SET, 0x05 | DS1305_ALARM_SET}; - // raise alarm every second: - DS1305_DATETIME alarm = {0x55 | DS1305_ALARM_SET, 0x32 | DS1305_ALARM_SET, - 0x20 | DS1305_ALARM_SET, 0x05 | DS1305_ALARM_SET}; - set_alarm0(&alarm); - // turn on timer and make alarm0 lower INT0 pin when alarm is triggered - set_control(DS1305_EOSC | DS1305_INTCN | DS1305_AIE0); - - // raise interrupt when INT0 pin falls (pin PD0 at AT90usbXXX, pin PD2 on ATmegaXXX (arduino pin 2)) - // the code in ISR(INT0_vect) above will be called - EICRA = (1< - -// MAX6675 connected to pin D9 -#define MAX6675_SELECT_PIN 8 -#define DESELECT_MAX6675 digitalWrite(MAX6675_SELECT_PIN, HIGH) -#define SELECT_MAX6675 digitalWrite(MAX6675_SELECT_PIN, LOW) - -void setup() -{ - pinMode(MAX6675_SELECT_PIN, OUTPUT); - DESELECT_MAX6675; - setup_spi(SPI_MODE_1, SPI_MSB, SPI_NO_INTERRUPT, SPI_MSTR_CLK8); - Serial.begin(19200); -} - -void loop() -{ - delay(500); - - // select the device, wait > 100nS, read two bytes, deselect - SELECT_MAX6675; - delayMicroseconds(1); - unsigned char highByte = send_spi(0); - unsigned char lowByte = send_spi(0); - DESELECT_MAX6675; - - // if bit 3 is high thermocouple is unconnected - if (lowByte & (1<<2)) { - Serial.print("Not connected "); - Serial.print(highByte, HEX); Serial.print(" "); - Serial.println(lowByte, HEX); - } else { - // temperature value is in bits 6-0 of highByte and 7-2 of lowByte - short value = (highByte << 5 | lowByte>>3); - // 1 bit is 0.25 degree 'divide' by 4 to show degrees - Serial.print(value/4); Serial.print("."); Serial.println(value%4 *25); - } -} diff --git a/AVR/lib/spi/Arduino/SPI/examples/MCP3201_ADC/MCP3201_ADC.pde b/AVR/lib/spi/Arduino/SPI/examples/MCP3201_ADC/MCP3201_ADC.pde deleted file mode 100644 index 2380dfb..0000000 --- a/AVR/lib/spi/Arduino/SPI/examples/MCP3201_ADC/MCP3201_ADC.pde +++ /dev/null @@ -1,32 +0,0 @@ -#include - -#define SELECT_ADC digitalWrite(8, LOW); -#define DESELECT_ADC digitalWrite(8, HIGH); - -unsigned short read_adc(void) -{ - // select ADC wait 100microseconds then read two bytes - SELECT_ADC; - unsigned char one = send_spi(0xFF); - unsigned char two = send_spi(0xFF); - DESELECT_ADC; - // 12 bits of ADC value is bottom 5 bits of first - // byte and top 7 bits of second, move into 16 bit int - return ((0x1F & one) << 7) | (two >> 1); -} - -void setup() -{ - pinMode(8, OUTPUT); - Serial.begin(19200); - // make sure ADC is not selected and setup spi - DESELECT_ADC; - setup_spi(SPI_MODE_0, SPI_MSB, SPI_NO_INTERRUPT, SPI_MSTR_CLK16); -} - -void loop() -{ - unsigned short num = read_adc(); - Serial.println(num); - delay(1000); -} diff --git a/AVR/lib/spi/Arduino/SPI/examples/MasterSlave/MasterSlave.pde b/AVR/lib/spi/Arduino/SPI/examples/MasterSlave/MasterSlave.pde deleted file mode 100644 index 6c3ca03..0000000 --- a/AVR/lib/spi/Arduino/SPI/examples/MasterSlave/MasterSlave.pde +++ /dev/null @@ -1,91 +0,0 @@ -#include -#include - -#define BUTTON_PIN 2 -#define LED_PIN 3 -#define FLASH_LED_COMMAND 0x01 - -#define OTHER_SELECT_PIN 7 -#define SELECT_OTHER digitalWrite(OTHER_SELECT_PIN, LOW); -#define DESELECT_OTHER digitalWrite(OTHER_SELECT_PIN, HIGH); - -#define BUFSIZE 20 -volatile unsigned char incoming[BUFSIZE]; -volatile short int received=0; - -// flash led that's connected to pin PD7 -void flash_led(int count) -{ - pinMode(LED_PIN, OUTPUT); - for (int i=0; i - -void reportError(int line, char *message, uint8_t expected, uint8_t actual) -{ - Serial.print("Test "); Serial.print(message); - Serial.print(" failed at line "); Serial.print(line-3); - Serial.print(", expected="); Serial.print(expected, BIN); - Serial.print(", actual="); Serial.println(actual, BIN); -} - -#define assertEquals(message, expected, actual) \ - if (expected != actual) { reportError(__LINE__, message, expected, actual); return; } - - -#define test_setup_spi(message, eSPCR, eSPSR, mode, dord, interrupt, clock) \ - setup_spi(mode, dord, interrupt, clock); \ - assertEquals(message, eSPCR, SPCR); \ - assertEquals(message, eSPSR, SPSR & 0x01); - - -void test_registers() -{ - // top 4 bits of SPCR - enabled, interrupt, lsb/msb, master/slave - disable_spi(); - assertEquals("0", 0x00, SPCR); - - test_setup_spi("1", 0xE0, 0x00, SPI_MODE_0, SPI_LSB, SPI_INTERRUPT, SPI_SLAVE); - test_setup_spi("2", 0x60, 0x00, SPI_MODE_0, SPI_LSB, SPI_NO_INTERRUPT, SPI_SLAVE); - test_setup_spi("3", 0x40, 0x00, SPI_MODE_0, SPI_MSB, SPI_NO_INTERRUPT, SPI_SLAVE); - - // CPOL/CPHA bits - timing mode - test_setup_spi("4", 0x40, 0x00, SPI_MODE_0, SPI_MSB, SPI_NO_INTERRUPT, SPI_SLAVE); - test_setup_spi("5", 0x44, 0x00, SPI_MODE_1, SPI_MSB, SPI_NO_INTERRUPT, SPI_SLAVE); - test_setup_spi("6", 0x48, 0x00, SPI_MODE_2, SPI_MSB, SPI_NO_INTERRUPT, SPI_SLAVE); - test_setup_spi("7", 0x4C, 0x00, SPI_MODE_3, SPI_MSB, SPI_NO_INTERRUPT, SPI_SLAVE); - - // clock - test_setup_spi("9", 0xE0, 1, SPI_MODE_0, SPI_LSB, SPI_INTERRUPT, SPI_MSTR_CLK2); - test_setup_spi("10", 0xE0, 0, SPI_MODE_0, SPI_LSB, SPI_INTERRUPT, SPI_MSTR_CLK4); - test_setup_spi("11", 0xE1, 1, SPI_MODE_0, SPI_LSB, SPI_INTERRUPT, SPI_MSTR_CLK8); - test_setup_spi("12", 0xE1, 0, SPI_MODE_0, SPI_LSB, SPI_INTERRUPT, SPI_MSTR_CLK16); - test_setup_spi("13", 0xE2, 1, SPI_MODE_0, SPI_LSB, SPI_INTERRUPT, SPI_MSTR_CLK32); - test_setup_spi("14", 0xE2, 0, SPI_MODE_0, SPI_LSB, SPI_INTERRUPT, SPI_MSTR_CLK64); - test_setup_spi("15", 0xE3, 0, SPI_MODE_0, SPI_LSB, SPI_INTERRUPT, SPI_MSTR_CLK128); -} - -void setup() -{ - Serial.begin(19200); -} - -void loop() -{ - delay(5000); - Serial.println("Running tests"); - test_registers(); - Serial.println("Run tests"); - while(true); -} diff --git a/AVR/lib/spi/Arduino/SPI/keywords.txt b/AVR/lib/spi/Arduino/SPI/keywords.txt deleted file mode 100644 index 96faa4c..0000000 --- a/AVR/lib/spi/Arduino/SPI/keywords.txt +++ /dev/null @@ -1,39 +0,0 @@ -####################################### -# Syntax Coloring Map For SPI -####################################### - -####################################### -# Datatypes (KEYWORD1) -####################################### - -####################################### -# Methods and Functions (KEYWORD2) -####################################### - -setup_spi KEYWORD2 -disable_spi KEYWORD2 -send_spi KEYWORD2 - -####################################### -# Constants (LITERAL1) -####################################### -SPI_SS_PIN LITERAL1 -SPI_SCK_PIN LITERAL1 -SPI_MOSI_PIN LITERAL1 -SPI_MISO_PIN LITERAL1 -SPI_MODE_0 LITERAL1 -SPI_MODE_1 LITERAL1 -SPI_MODE_2 LITERAL1 -SPI_MODE_3 LITERAL1 -SPI_LSB LITERAL1 -SPI_MSB LITERAL1 -SPI_NO_INTERRUPT LITERAL1 -SPI_INTERRUPT LITERAL1 -SPI_SLAVE LITERAL1 -SPI_MSTR_CLK2 LITERAL1 -SPI_MSTR_CLK4 LITERAL1 -SPI_MSTR_CLK8 LITERAL1 -SPI_MSTR_CLK16 LITERAL1 -SPI_MSTR_CLK32 LITERAL1 -SPI_MSTR_CLK64 LITERAL1 -SPI_MSTR_CLK128 LITERAL1 diff --git a/AVR/lib/spi/Arduino/SPI/spi.c b/AVR/lib/spi/Arduino/SPI/spi.c deleted file mode 100644 index 27b0518..0000000 --- a/AVR/lib/spi/Arduino/SPI/spi.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - * Copyright (c) 2009 Andrew Smallbone - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - */ - -#include - -#ifdef __cplusplus -extern "C"{ -#endif - -#ifdef __ARDUINO__ -#include -#endif - -void setup_spi(uint8_t mode, int dord, int interrupt, uint8_t clock) -{ - // specify pin directions for SPI pins on port B - if (clock == SPI_SLAVE) { // if slave SS and SCK is input - DDRB &= ~(1< - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - */ -#ifndef _spi_h__ -#define _spi_h__ - -#include - -#ifdef __cplusplus -extern "C"{ -#endif - -// create alias for the different SPI chip pins - code assumes all on port B -#if (defined(__AVR_AT90USB82__) || defined(__AVR_AT90USB162__)) - #define SPI_SS_PIN PORTB0 - #define SPI_SCK_PIN PORTB1 - #define SPI_MOSI_PIN PORTB2 - #define SPI_MISO_PIN PORTB3 -#elif (defined(__AVR_ATmega48__) || defined(_AVR_ATmega88__) || defined(__AVR_ATmega168__) || defined(__AVR_ATmega328__) || defined(__AVR_ATmega328P__)) - #define SPI_SS_PIN PORTB2 - #define SPI_SCK_PIN PORTB5 - #define SPI_MOSI_PIN PORTB3 - #define SPI_MISO_PIN PORTB4 -#else - #error unknown processor - add to spi.h -#endif - -// SPI clock modes -#define SPI_MODE_0 0x00 /* Sample (Rising) Setup (Falling) CPOL=0, CPHA=0 */ -#define SPI_MODE_1 0x01 /* Setup (Rising) Sample (Falling) CPOL=0, CPHA=1 */ -#define SPI_MODE_2 0x02 /* Sample (Falling) Setup (Rising) CPOL=1, CPHA=0 */ -#define SPI_MODE_3 0x03 /* Setup (Falling) Sample (Rising) CPOL=1, CPHA=1 */ - -// data direction -#define SPI_LSB 1 /* send least significant bit (bit 0) first */ -#define SPI_MSB 0 /* send most significant bit (bit 7) first */ - -// whether to raise interrupt when data received (SPIF bit received) -#define SPI_NO_INTERRUPT 0 -#define SPI_INTERRUPT 1 - -// slave or master with clock diviser -#define SPI_SLAVE 0xF0 -#define SPI_MSTR_CLK4 0x00 /* chip clock/4 */ -#define SPI_MSTR_CLK16 0x01 /* chip clock/16 */ -#define SPI_MSTR_CLK64 0x02 /* chip clock/64 */ -#define SPI_MSTR_CLK128 0x03 /* chip clock/128 */ -#define SPI_MSTR_CLK2 0x04 /* chip clock/2 */ -#define SPI_MSTR_CLK8 0x05 /* chip clock/8 */ -#define SPI_MSTR_CLK32 0x06 /* chip clock/32 */ - - - -// setup spi -void setup_spi(uint8_t mode, // timing mode SPI_MODE[0-4] - int dord, // data direction SPI_LSB|SPI_MSB - int interrupt, // whether to raise interrupt on recieve - uint8_t clock); // clock diviser - -// disable spi -void disable_spi(void); - -// send and receive a byte of data (master mode) -uint8_t send_spi(uint8_t out); - -// receive the byte of data waiting on the SPI buffer and -// set the next byte to transfer - for use in slave mode -// when interrupts are enabled. -uint8_t received_from_spi(uint8_t out); - -#ifdef __cplusplus -} // extern "C" -#endif - -#endif - diff --git a/AVR/lib/spi/Makefile b/AVR/lib/spi/Makefile deleted file mode 100644 index 69e620d..0000000 --- a/AVR/lib/spi/Makefile +++ /dev/null @@ -1,17 +0,0 @@ -# -*- makefile -*- - -#TARGET = spi-test-adc -#TARGET = spi-test-rtc -TARGET = spi-test-masterslave - -OBJECTS = $(TARGET).o spi.o -CFLAGS = -I../libs -include ./Makefile.mf - -DEVICE = at90usb162 -CLOCK = 16000000 - -examples: - make -k TARGET=spi-test-adc clean all - make -k TARGET=spi-test-rtc OBJECTS="spi-test-rtc.o spi.o ds1305.o" clean all - make -k TARGET=spi-test-masterslave clean all \ No newline at end of file diff --git a/AVR/lib/spi/Makefile.mf b/AVR/lib/spi/Makefile.mf deleted file mode 100644 index aeb6d4e..0000000 --- a/AVR/lib/spi/Makefile.mf +++ /dev/null @@ -1,109 +0,0 @@ -# Name: Makefile - -# This is a prototype Makefile. Modify it according to your needs. -# You should at least check the settings for -# DEVICE ....... The AVR device you compile for -# CLOCK ........ Target AVR clock rate in Hertz -# OBJECTS ...... The object files created from your source files. This list is -# usually the same as the list of source files with suffix ".o". -# PROGRAMMER ... Options to avrdude which define the hardware you use for -# uploading to the AVR and the interface where this hardware -# is connected. -# FUSES ........ Parameters for avrdude to flash the fuses appropriately. - -DEVICE = at90usb162 -CLOCK = 16000000 -PROGRAMMER = -c stk500v2 -P avrdoper -#OBJECTS = $(TARGET).o -FUSES = -U hfuse:w:0xd9:m -U lfuse:w:0x24:m -# ATMega8 fuse bits (fuse bits for other devices are different!): -# Example for 8 MHz internal oscillator -# Fuse high byte: -# 0xd9 = 1 1 0 1 1 0 0 1 <-- BOOTRST (boot reset vector at 0x0000) -# ^ ^ ^ ^ ^ ^ ^------ BOOTSZ0 -# | | | | | +-------- BOOTSZ1 -# | | | | +---------- EESAVE (set to 0 to preserve EEPROM over chip erase) -# | | | +-------------- CKOPT (clock option, depends on oscillator type) -# | | +---------------- SPIEN (if set to 1, serial programming is disabled) -# | +------------------ WDTON (if set to 0, watchdog is always on) -# +-------------------- RSTDISBL (if set to 0, RESET pin is disabled) -# Fuse low byte: -# 0x24 = 0 0 1 0 0 1 0 0 -# ^ ^ \ / \--+--/ -# | | | +------- CKSEL 3..0 (8M internal RC) -# | | +--------------- SUT 1..0 (slowly rising power) -# | +------------------ BODEN (if 0, brown-out detector is enabled) -# +-------------------- BODLEVEL (if 0: 4V, if 1: 2.7V) - -# Example for 12 MHz external crystal: -# Fuse high byte: -# 0xc9 = 1 1 0 0 1 0 0 1 <-- BOOTRST (boot reset vector at 0x0000) -# ^ ^ ^ ^ ^ ^ ^------ BOOTSZ0 -# | | | | | +-------- BOOTSZ1 -# | | | | +---------- EESAVE (set to 0 to preserve EEPROM over chip erase) -# | | | +-------------- CKOPT (clock option, depends on oscillator type) -# | | +---------------- SPIEN (if set to 1, serial programming is disabled) -# | +------------------ WDTON (if set to 0, watchdog is always on) -# +-------------------- RSTDISBL (if set to 0, RESET pin is disabled) -# Fuse low byte: -# 0x9f = 1 0 0 1 1 1 1 1 -# ^ ^ \ / \--+--/ -# | | | +------- CKSEL 3..0 (external >8M crystal) -# | | +--------------- SUT 1..0 (crystal osc, BOD enabled) -# | +------------------ BODEN (if 0, brown-out detector is enabled) -# +-------------------- BODLEVEL (if 0: 4V, if 1: 2.7V) - - -# Tune the lines below only if you know what you are doing: - -AVRDUDE = avrdude $(PROGRAMMER) -p $(DEVICE) -COMPILE = avr-gcc $(CFLAGS) -Wall -std=gnu99 -funsigned-char -funsigned-bitfields -ffunction-sections -fpack-struct -fshort-enums -I. -Os -DF_CPU=$(CLOCK) -mmcu=$(DEVICE) - -# symbolic targets: -all: $(TARGET).hex - -.c.o: - $(COMPILE) -c $< -o $@ - -.S.o: - $(COMPILE) -x assembler-with-cpp -c $< -o $@ -# "-x assembler-with-cpp" should not be necessary since this is the default -# file type for the .S (with capital S) extension. However, upper case -# characters are not always preserved on Windows. To ensure WinAVR -# compatibility define the file type manually. - -.c.s: - $(COMPILE) -S $< -o $@ - -flash: all - $(AVRDUDE) -U flash:w:$(TARGET).hex:i - -fuse: - $(AVRDUDE) $(FUSES) - -# Xcode uses the Makefile targets "", "clean" and "install" -install: flash fuse - -# if you use a bootloader, change the command below appropriately: -load: all - bootloadHID $(TARGET).hex - -clean: - rm -f $(TARGET).hex $(TARGET).elf $(OBJECTS) - -# file targets: -$(TARGET).elf: $(OBJECTS) - $(COMPILE) -o $(TARGET).elf $(OBJECTS) - -$(TARGET).hex: $(TARGET).elf - rm -f $(TARGET).hex - avr-objcopy -j .text -j .data -O ihex $(TARGET).elf $(TARGET).hex -# If you have an EEPROM section, you must also create a hex file for the -# EEPROM and add it to the "flash" target. - -# Targets for code debugging and analysis: -disasm: $(TARGET).elf - avr-objdump -d $(TARGET).elf - -cpp: - $(COMPILE) -E $(TARGET).c diff --git a/AVR/lib/spi/ds1305.c b/AVR/lib/spi/ds1305.c deleted file mode 100644 index fbafeb4..0000000 --- a/AVR/lib/spi/ds1305.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * Copyright (c) 2009 Andrew Smallbone - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - */ - -#include - -#ifdef __cplusplus -extern "C"{ -#endif - -unsigned char ds1305_transfer(unsigned char address, unsigned char data) -{ - select_ds1305(); - send_spi(address); - unsigned char out = send_spi(data); - deselect_ds1305(); - return out; -} - -void ds1305_write_block(unsigned char address, unsigned char *data, int length) -{ - select_ds1305(); - send_spi(address+DS1305_WRITE); - int i; - for (i=0; i - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - */ -#ifndef _ds1305_h__ -#define _ds1305_h__ - -#include - -#ifdef __cplusplus -extern "C"{ -#endif - -// these should be defined to the operation used to select/deselect the DS1305 -void select_ds1305(void); -void deselect_ds1305(void); - -#define DS1305_WRITE 0x80 -#define DS1305_TIME 0x00 -#define DS1305_ALARM0 0x07 -#define DS1305_ALARM1 0x0B -#define DS1305_CONTROL 0x0F -#define DS1305_STATUS 0x010 -#define DS1305_CHARGER 0x11 -#define DS1305_USERRAM 0x20 - -#define DS1305_ALARM_SET 0x80 - -// send the address and a byte and returns the byte returned by the DS1305 -unsigned char ds1305_transfer(unsigned char address, unsigned char data); -// write a block of bytes - will add 0x80 to the address -void ds1305_write_block(unsigned char address, unsigned char *data, int length); -// read a block of bytes -void ds1305_read_block(unsigned char address, unsigned char *data, int length); - -typedef struct _DS1305_DATETIME -{ - unsigned char seconds; - unsigned char minutes; - unsigned char hours; - unsigned char dayofweek; - unsigned char date; - unsigned char month; - unsigned char year; -} DS1305_DATETIME; - -/* set/get the current time/date passed the address of a DS1305_DATETIME struct - To set the current time/date to "20:11:32 Sunday 29/07/2009" - DS1305_DATETIME current = {0x32, 0x11, 0x20, 0x01, 0x29, 0x05, 0x09}; - set_time(¤t); -*/ -#define set_time(datetime) ds1305_write_block(DS1305_TIME, (unsigned char *)datetime, 7) -#define get_time(datetime) ds1305_read_block(DS1305_TIME, (unsigned char *)datetime, 7) - -/* set/get the time of alarm0/alarm1 passed the address of a DS1305_DATETIME struct, - although only the seconds/minutes/hours/dayofweek are sent/received -*/ -#define set_alarm0(time) ds1305_write_block(DS1305_ALARM0, (unsigned char *)time, 4) -#define get_alarm0(time) ds1305_read_block(DS1305_ALARM0, (unsigned char *)time, 4) -#define set_alarm1(time) ds1305_write_block(DS1305_ALARM1, (unsigned char *)time, 4) -#define get_alarm1(time) ds1305_read_block(DS1305_ALARM1, (unsigned char *)time, 4) - -// flags used in set_control/get_control -#define DS1305_EOSC 0x80 // enable oscillator, note this is inverse of ^EOSC bit value on chip -#define DS1305_WP 0x40 // write protect -#define DS1305_INTCN 0x04 // enable interrupts -#define DS1305_AIE1 0x02 // alarm0 interrupt enable -#define DS1305_AIE0 0x01 // alarm1 interrupt enable - -/* get/set the control register. To enable the oscillator, turn on write protection - and enable all interrupts the following would be used: - set_control(DS1305_EOSC | DS1305_WP | DS1305_INTCN | DS1305_AIE1 | DS1305_AIE0); -*/ -#define set_control(data) ds1305_transfer(DS1305_CONTROL+DS1305_WRITE, (data) ^ DS1305_EOSC) -#define get_control(data) (ds1305_transfer(DS1305_CONTROL, 0xFF) ^ DS1305_EOSC) - -// flags used in get_status -#define DS1305_IRQF0 0x01 // interrupt 0 request flag - current time has matched alarm 0 -#define DS1305_IRQF1 0x02 // interrupt 1 request flag - current time has matched alarm 1 -#define get_status(data) ds1305_transfer(DS1305_STATUS, 0xFF) - -// flags used in set_charger/get_charger -#define DS1305_CHARGER_OFF 0x5C // no charge - don't combine with other values -#define DS1305_CHARGER_1D2K 0xA5 // 1 diode 2K resistor -#define DS1305_CHARGER_1D4K 0xA6 // 1 diode 4K resistor -#define DS1305_CHARGER_1D8K 0xA7 // 1 diode 8K resistor -#define DS1305_CHARGER_2D2K 0xA1 // 2 diode 2K resistor -#define DS1305_CHARGER_2D4K 0xA2 // 2 diode 4K resistor -#define DS1305_CHARGER_2D8K 0xA3 // 2 diode 8K resistor -/* get/set the charger register */ -#define set_charger(data) ds1305_transfer(DS1305_CHARGE+DS1305_WRITE, data) -#define get_charger(data) ds1305_transfer(DS1305_CHARGE, 0xFF) - -#ifdef __cplusplus -} // extern "C" -#endif - -#endif diff --git a/AVR/lib/spi/readme.txt b/AVR/lib/spi/readme.txt deleted file mode 100644 index 350bbe3..0000000 --- a/AVR/lib/spi/readme.txt +++ /dev/null @@ -1,111 +0,0 @@ -This directory contains a simple AVR spi helper library that should -run on most AVR microcontrollers which support SPI. - -The code is further described at: -http://www.rocketnumbernine.com/2009/04/26/using-spi-on-an-avr-1/ (basics & ADC) -http://www.rocketnumbernine.com/2009/05/12/using-spi-on-an-avr-2/ (RTC) - -Any comments/questions to - -Make sure viewing this text in a fixed width font for the tables and diagrams - - ----------------------------------- -Arduino ----------------------------------- -The Arduino Directory contains all code required to run on the Arduino. -Simply copy the Arduino/SPI and Arduino/DS1305 directories to the -"hardware/libraries" directory of your Arduino IDE installation and -restart the Arduino IDE. Once restarted there should be -"Sketch->Import Library->SPI" and "Sketch->Import Library->DS1305" menu -entries which can be used to include the spi header files into your project. -"File->Sketchbook->Examples->Library SPI" contains 3 example projects - - ----------------------------------- -AVR GCC ----------------------------------- -To use, just copy spi.h and spi.c (and ds1305.c and ds1305.h if using -the DS1305 Real Time Clock chip) to your own project and compile. - -Makefile.mf - 'standard' generated make file from AVR GCC -Makefile - Makefile "make examples" will make example programs below: - -spi-test-adc.c MC3201 Analogue to Digital convertor example -spi-test-rtc.c DS1305 - Real-Time-Clock/Alarm example -spi-test-masterslave.c Master/Slave communication example - - ----------------------------------- -PINS ----------------------------------- -Following are the AVR pins used in the circuits below - - ATmegaXXX Arduino AT90usbXXX -MISO PB4 12 PB3 -MOSI PB3 11 PB2 -SCK PB5 13 PB1 -SS PB2 10 PB0 - -INT0 PD2 2 PD0 - - ----------------------------------- -MC3201 12-bit ADC Circuit ----------------------------------- -See http://ww1.microchip.com/downloads/en/DeviceDoc/21290D.pdf for full details. - - +-----------------+ - | MC3201 | - +5V [| Vref Vdd |] +5V - | | -Analogue In [| IN+ CLK |] AVR SCK - | | - Ground [| IN- Dout |] AVR MOSI - | | - Ground [| Vss ^CS |] AVR CE - +-----------------+ - - -For testing purposes "Analogue In" can be connected to the middle wire -of a potentiometer with one outer wire being connected to +5 and the -other to Ground. A 1uF Capacitor should be placed between the analogue -input and ground, and +5V and ground as close to the chip as possible, -but in a pinch the circuit will likely work without. - - -MOSI/SLCK/CE to the relevant pin on the AVR (MISO is not used) - see above. - ----------------------------------- -DS1305 Real Time Clock Circuit ----------------------------------- -See http://datasheets.maxim-ic.com/en/ds/DS1305.pdf for full details. - -Without a battery the following connections can be used: - - +-----------------+ - | DS1305 | - Ground [| Vcc2 Vcc1 |] +5V - | | - Ground [| Vbat ^PF |] Not Connected - | | - Crystal [| X1 Vccif |] +5V - | | - Crystal [| X2 SDO |] AVR MISO - | | - Not Connected [| N.C. SDI |] AVR MOSI - | | - AVR INT0 [| INT0 SLCK |] AVR SLCK - | | - Not Connected [| INT1 CE |] AVR CE - | | - Ground [| GND SERMODE |] +5V - +-----------------+ - - -MISO/MOSI/SLCK/CE/INT0 to the relevant pin on the AVR - see above. - - - - - diff --git a/AVR/lib/spi/spi-test-adc.c b/AVR/lib/spi/spi-test-adc.c deleted file mode 100644 index a68bfb7..0000000 --- a/AVR/lib/spi/spi-test-adc.c +++ /dev/null @@ -1,61 +0,0 @@ -/* - * Copyright (c) 2009 Andrew Smallbone - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - */ - -#include -#include -#include - -#define SELECT_ADC PORTB &= ~(1<> 1); -} - -int main(void) -{ - DDRB |= (1<> 9)); // use the top 3 bytes to turn on LED - _delay_ms(1); - } -} - diff --git a/AVR/lib/spi/spi-test-masterslave.c b/AVR/lib/spi/spi-test-masterslave.c deleted file mode 100644 index 21a7dbe..0000000 --- a/AVR/lib/spi/spi-test-masterslave.c +++ /dev/null @@ -1,88 +0,0 @@ -#include -#include -#include - -#define FLASH_LED_COMMAND 0x01 -#define OTHER_SELECT_PIN PB6 -#define SELECT_OTHER PORTB &= ~(1<= BUFSIZE || incoming[received-1] == 0x00) { - parse_message(); - received = 0; - } -} - -int main(void) -{ - // make sure other device is unselected (pin is HIGH) and setup spi - DESELECT_OTHER; - DDRB |= (1< - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - */ - -#include -#include -#include -#include - -#include - -// following two methods required by DS1305 library to select/deselect device -void select_ds1305(void) -{ - PORTD |= (1< - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - */ - -#include "spi.h" - -#ifdef __cplusplus -extern "C"{ -#endif - -#ifdef __ARDUINO__ -#include -#endif - -#ifndef SPI_SOFT_DRIVER - -// hardware driver - -void setup_spi(uint8_t mode, int dord, int interrupt, uint8_t clock) -{ - // specify pin directions for SPI pins on port B - if (clock == SPI_SLAVE) { // if slave SS and SCK is input - DDRB &= ~(1< - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - */ -#ifndef _spi_h__ -#define _spi_h__ - -#include - -#ifdef __cplusplus -extern "C"{ -#endif - - -// create alias for the different SPI chip pins - code assumes all on port B -#if (defined(__AVR_AT90USB82__) || defined(__AVR_AT90USB162__)) - #define SPI_SS_PIN PORTB0 - #define SPI_SCK_PIN PORTB1 - #define SPI_MOSI_PIN PORTB2 - #define SPI_MISO_PIN PORTB3 -#elif (defined(__AVR_ATmega48__) || defined(_AVR_ATmega88__) || defined(__AVR_ATmega168__) || defined(__AVR_ATmega328__) || defined(__AVR_ATmega328P__)) \ - || defined(__AVR_ATmega168PA__) || defined(__AVR_ATmega8A__) - #define SPI_PORT PORTB - #define SPI_PIN PINB - #define SPI_DDR DDRB - #define SPI_SS_PIN PORTB2 - #define SPI_SCK_PIN PORTB5 - #define SPI_MOSI_PIN PORTB3 - #define SPI_MISO_PIN PORTB4 -#else - #error unknown processor - add to spi.h -#endif - -// SPI clock modes -#define SPI_MODE_0 0x00 /* Sample (Rising) Setup (Falling) CPOL=0, CPHA=0 */ -#define SPI_MODE_1 0x01 /* Setup (Rising) Sample (Falling) CPOL=0, CPHA=1 */ -#define SPI_MODE_2 0x02 /* Sample (Falling) Setup (Rising) CPOL=1, CPHA=0 */ -#define SPI_MODE_3 0x03 /* Setup (Falling) Sample (Rising) CPOL=1, CPHA=1 */ - -// data direction -#define SPI_LSB 1 /* send least significant bit (bit 0) first */ -#define SPI_MSB 0 /* send most significant bit (bit 7) first */ - -// whether to raise interrupt when data received (SPIF bit received) -#define SPI_NO_INTERRUPT 0 -#define SPI_INTERRUPT 1 - -// slave or master with clock diviser -#define SPI_SLAVE 0xF0 -#define SPI_MSTR_CLK4 0x00 /* chip clock/4 */ -#define SPI_MSTR_CLK16 0x01 /* chip clock/16 */ -#define SPI_MSTR_CLK64 0x02 /* chip clock/64 */ -#define SPI_MSTR_CLK128 0x03 /* chip clock/128 */ -#define SPI_MSTR_CLK2 0x04 /* chip clock/2 */ -#define SPI_MSTR_CLK8 0x05 /* chip clock/8 */ -#define SPI_MSTR_CLK32 0x06 /* chip clock/32 */ - - - -// setup spi -void setup_spi(uint8_t mode, // timing mode SPI_MODE[0-4] - int dord, // data direction SPI_LSB|SPI_MSB - int interrupt, // whether to raise interrupt on recieve - uint8_t clock); // clock diviser - -// disable spi -void disable_spi(void); - -// send and receive a byte of data (master mode) -uint8_t send_spi(uint8_t out); - -// receive the byte of data waiting on the SPI buffer and -// set the next byte to transfer - for use in slave mode -// when interrupts are enabled. -uint8_t received_from_spi(uint8_t out); - -#ifdef __cplusplus -} // extern "C" -#endif - -#include "spi.c" - -#endif -