Modified all example sketches to report the sketch info to the gateway/controller.

libraries/MySensors/examples/BatteryPoweredSensor/BatteryPoweredSensor.ino

@@ -1,5 +1,5 @@
-// This is an example on how to send in battery measurement for a sensor
+// This is an example that demonstrates how to report the battery level for a sensor
-// For instruction how to measure battery power on A0 see the follwoing forum
+// Instructions for measuring battery capacity on A0 are available in the follwoing forum
 // thread: http://forum.micasaverde.com/index.php/topic,20078.0.html
 
 
@@ -21,6 +21,9 @@ void setup()
    // use the 1.1 V internal reference
    analogReference(INTERNAL);
    gw.begin();
+
+   // Send the sketch version information to the gateway and Controller
+   gw.sendSketchInfo("Battery Meter", "1.0");
 }
 
 void loop()

libraries/MySensors/examples/DallasTemperatureSensor/DallasTemperatureSensor.ino

@@ -23,6 +23,10 @@ void setup()
   sensors.begin();
   gw.begin(); 
 
+   // Send the sketch version information to the gateway and Controller
+   gw.sendSketchInfo("Temperature Sensor", "1.0");
+
+
   // Fetch the number of attached sensors  
   numSensors = sensors.getDeviceCount();
   // Register all sensors to gw (they will be created as child devices)

libraries/MySensors/examples/DistanceSensor/DistanceSensor.ino

@@ -21,6 +21,9 @@ void setup()
 { 
   gw.begin();
 
+  // Send the sketch version information to the gateway and Controller
+  gw.sendSketchInfo("Distance Sensor", "1.0");
+
   // Register all sensors to gw (they will be created as child devices)
   gw.sendSensorPresentation(0, S_DISTANCE);
   metric = gw.isMetricSystem();

libraries/MySensors/examples/EnergyMeterPulseSensor/EnergyMeterPulseSensor.ino

@@ -39,6 +39,10 @@ void setup()
 {  
   gw.begin();
 
+  // Send the sketch version information to the gateway and Controller
+  gw.sendSketchInfo("Energy Meter", "1.0");
+
+
   // Register this device as power sensor
   gw.sendSensorPresentation(CHILD_ID, S_POWER);
 

libraries/MySensors/examples/IrSensor/IrSensor.ino

@@ -26,6 +26,9 @@ void setup()
   irrecv.enableIRIn(); // Start the ir receiver
   gw.begin();
 
+  // Send the sketch version information to the gateway and Controller
+  gw.sendSketchInfo("IR Sensor", "1.0");
+
   // Register a sensors to gw. Use binary light for test purposes.
   gw.sendSensorPresentation(CHILD_1, S_LIGHT);
 }

libraries/MySensors/examples/LightLuxSensor/LightLuxSensor.ino

@@ -38,6 +38,9 @@ void setup()
 { 
   gw.begin();
 
+  // Send the sketch version information to the gateway and Controller
+  gw.sendSketchInfo("Light Lux Sensor", "1.0");
+
   // Register all sensors to gateway (they will be created as child devices)
   gw.sendSensorPresentation(CHILD_ID_LIGHT, S_LIGHT_LEVEL);
   

libraries/MySensors/examples/LightSensor/LightSensor.ino

@@ -17,6 +17,9 @@ void setup()
 { 
   gw.begin();
 
+  // Send the sketch version information to the gateway and Controller
+  gw.sendSketchInfo("Light Sensor", "1.0");
+
   // Register all sensors to gateway (they will be created as child devices)
   gw.sendSensorPresentation(CHILD_ID_LIGHT, S_LIGHT_LEVEL);
 }

libraries/MySensors/examples/MotionSensor/MotionSensor.ino

@@ -14,6 +14,10 @@ Sleep sleep;
 void setup()  
 {  
   gw.begin();
+
+  // Send the sketch version information to the gateway and Controller
+  gw.sendSketchInfo("Motion Sensor", "1.0");
+
   pinMode(DIGITAL_INPUT_SENSOR, INPUT);      // sets the motion sensor digital pin as input
   // Register all sensors to gw (they will be created as child devices)
   gw.sendSensorPresentation(CHILD_ID, S_MOTION);

libraries/MySensors/examples/PressureSensor/PressureSensor.ino

@@ -27,6 +27,10 @@ boolean metric;
 
 void setup() {
   gw.begin();
+
+  // Send the sketch version information to the gateway and Controller
+  gw.sendSketchInfo("Pressure Sensor", "1.0");
+
   if (!bmp.begin()) {
     Serial.println("Could not find a valid BMP085 sensor, check wiring!");
     while (1) { }

libraries/MySensors/examples/RelayActuator/RelayActuator.ino

@@ -16,6 +16,9 @@ void setup()
 {  
   gw.begin();
 
+  // Send the sketch version information to the gateway and Controller
+  gw.sendSketchInfo("Relay", "1.0");
+
   // Register all sensors to gw (they will be created as child devices)
   for (int i=0; i<NUMBER_OF_RELAYS;i++) {
     gw.sendSensorPresentation(RELAY_1+i, S_LIGHT);

libraries/MySensors/examples/RelayWithButtonActuator/RelayWithButtonActuator.ino

@@ -26,6 +26,9 @@ void setup()
 {  
   gw.begin();
 
+  // Send the sketch version information to the gateway and Controller
+  gw.sendSketchInfo("Relay & Button", "1.0");
+
   // Set buttonPin as Input
   pinMode(BUTTON_PIN, INPUT);
   buttVal = digitalRead(BUTTON_PIN); //read initial state

libraries/MySensors/examples/RelayingNode/RelayingNode.ino

@@ -16,7 +16,7 @@ void setup()
   gw.begin();
 
   //Send the sensor node sketch version information to the gateway
-  gw.sendSketchInfo("RelayingNode", "1.2");
+  gw.sendSketchInfo("Relaying Node", "1.0");
 }
 
 void loop() 

libraries/MySensors/examples/ServoActuator/ServoActuator.ino

@@ -29,6 +29,9 @@ void setup()
 { 
   gw.begin();
 
+  // Send the sketch version information to the gateway and Controller
+  gw.sendSketchInfo("Servo", "1.0");
+
   // Register all sensors to gw (they will be created as child devices)
   gw.sendSensorPresentation(CHILD_ID, S_COVER);
 

libraries/MySensors/examples/SoilMoistSensor/SoilMoistSensor.ino

@@ -16,6 +16,9 @@ void setup()
 { 
   gw.begin();
 
+  // Send the sketch version information to the gateway and Controller
+  gw.sendSketchInfo("Soil Moisture Sensor", "1.0");
+
   pinMode(DIGITAL_INPUT_SOIL_SENSOR, INPUT);      // sets the soil sensor digital pin as input
   // Register all sensors to gw (they will be created as child devices)  
   gw.sendSensorPresentation(CHILD_ID, S_MOTION);

libraries/MySensors/examples/TimeAndVariableSensor/TimeAndVariableSensor.ino

@@ -17,6 +17,9 @@ void setup()
 {  
   gw.begin();
 
+  // Send the sketch version information to the gateway and Controller
+  gw.sendSketchInfo("Clock", "1.0");
+
   // Register any sensortype. This example we just create a motion sensor.
   gw.sendSensorPresentation(CHILD_ID, S_MOTION);
 

libraries/MySensors/examples/WaterMeterPulseSensor/WaterMeterPulseSensor.ino

@@ -48,6 +48,9 @@ void setup()
 {  
   gw.begin(); 
 
+  // Send the sketch version information to the gateway and Controller
+  gw.sendSketchInfo("Water Meter", "1.0");
+
   // Register this device as Waterflow sensor
   gw.sendSensorPresentation(CHILD_ID, S_WATER);