- The following settings can be use on the config file:
- verbose=[debug,info,notice,warn,err] - Logging verbosity.
- log_file[0|1] - Enable logging to a file.
- log_filepath=(FILE) - Log file path.
- log_pipe=[0|1] - Enable logging to a named pipe(aka fifo).
Use this option to view your gateway's log messages from the
log_pipe_file (defined below).
To do so, run the following command on another terminal:
- $ cat "log_pipe_file"
- log_pipe_file=(FILE)
- syslog=[0|1] - Enable logging to syslog.
- eeprom_file=[/etc/mysensors.eeprom]
- eeprom_size=[1024]
- Change some mysgw parameters:
- Added:
- -q, --quiet: for quiet mode, disable log messages written to the
terminal.
- Removed:
- -d, --debug: removed, log messages are now enabled by default.
- Replaced:
- -b, --background: replaced by --daemon
- isatty() is no longer used, log messages by default are printed to
stderr unless the gateway is started with --quiet (#1022)
- MY_LINUX_CONFIG_FILE: no longer holds the path to the eeprom file,
but to the configuration file
* Derive default interrupt from configured instead of default pin
Derive DEFAULT_RFM69_IRQ_NUM from MY_RFM69_IRQ_PIN instead of
DEFAULT_RFM69_IRQ_PIN so that _NUM does not have to be defined
if _PIN is redefined
* Change default IRQ pin for RFM69/95 on ESP8266 to GPIO5=D1
The originally defined pin GPIO2 prevent ESP8266 from booting,
since it has to be pulled high for booting and DIO0 from the
RFM69 is defaul low.
For this reason, it is improbably that anyone is using the default
and would be affected by this change.
* New Firmware OTA for NVM/mcuboot (nRF5)
- Support for mcuboot (nRF5)
- Support for run length encoded data
- Support for smaller FIRMWARE_BLOCK_SIZE, if required
* Update NVM
* New MY_LOCK_MCU for NRF5
* Test with Sensebender GW + Sensebender Micro was successful
- The symlink name for the PTY device is set using --my-serial-port
making --my-serial-pty deprecated
- Replace MY_LINUX_IS_SERIAL_PTY with MY_LINUX_SERIAL_IS_PTY
- MY_DEBUGDEVICE can be used to print debug messages from MySensors
(as it is currently in the other architectures)
- Rename SerialSimulator class to StdInOutStream
- Remove old deprecated option --my-radio
This log message makes the Serial gateway print the serial port path,
similar to how the Ethernet gateway prints IP and port.
Example log output:
mysgw: Serial port /dev/MyCoolTTY (115200 baud) created
* Fix NRF5_ESB_readMessage, allways enable radio
* NRF5: fixes and improvements
- Compiles with arduino core for nRF52 (primo)
MY_RADIO_NRF5_ESB stays unsupported with primo!
- Split ACK negation flag into
MY_NRF5_ESB_REVERSE_ACK_TX
MY_NRF5_ESB_REVERSE_ACK_RX
- MY_RADIO_NRF5_ESB changes to act more than NRF24
- MY_RADIO_NRF5_ESB better support for powerdown/standby
- Moved initialization from MyMainNRF5 to hwInit()
* Added support for I2C EEPROM OTA
* EEPROM OTA now uses extEEPROM as driver
* Compiler warning fix
* Style check fixes
* Fix doxygen warnings of I2CEeprom
* Use bool instead of boolean in I2CEeprom shim
* Fix re-merged style problem
In the Arduino IDE, boolean is an alias for bool.
The Arduino IDE might deprecate boolean in the future. See
https://github.com/arduino/Arduino/issues/4673 for details.
Command:
find drivers -type f | xargs sed -i 's/boolean/bool/g'
* Sha256 driver cosmetics
cosmetic cleanups:
- use actual define that was used to allocate the array
- remove unused file globals
* Save memory by eliminating sha256_hash array
eliminated sha256_hash array to save memory. Instead pass the
Sha256Class result pointer.
There seems to be no use for the extra sha256_hash array as it was
zeroed exactly at the same time, the Sha256Class result was invalidated
(by calling signerSha256Init)
If the result needs to stay around while another sha is calculated,
it's better to have the user taking care of this.
* Moved hmac methods and buffers to separate class
This allows saving the buffer memory if no hmac is needed ... eg. with
the public Signing API.
* Signing support with MAX_PAYLOAD>32
Support in the signing backends to handle configurations
where MAX_PAYLOAD is more than 32 bytes.
Fixes#748
* Support big message signatures
Support for signing messages larger than 32 bytes.
This is not fully testable with the current version of
the library but the change would add theoretical support
for signing any sized messages.
Fixes#749
* Have gw properly indicate whitelisting preferences
If the gateway hold a signing whitelist, inform all
nodes of this requirement and not just nodes that hold
whitelists themselves.
Fixes#806
* Harden security
The flag MY_SIGNING_GW_REQUEST_SIGNATURES_FROM_ALL
has been removed. Gateway will now request signatures
from everyone by default.
In addition to this, no nodes in the network will allow
clearing of signing/whitelisting preferences by OTA
commands by default.
If the old behaviour is needed (suitable for gradual
signing roll out and development purposes) a new flag,
MY_SIGNING_WEAK_SECURITY can be set.
Fixes#807
* Signing debug messages rewritten
All signing related debug has been rewritten to
better match other core debug printouts.
Also, backends are updated to have a smaller
implementation delta.
* Simplified signing option implemented
Enable by MY_SIGNING_SIMPLE_PASSWD. Signing, and signing requirements
will be enabled, as will encryption. Whitelisting is optional.
The value provided to MY_SIGNING_SIMPLE_PASSWD is used as HMAC and AES
key. Whitelists use the first 8 bytes of the password and the ninth
byte from the node ID as serial.
Password is required to be at least 8 characters wide. It is zero
padded if it is not long enough to cover the AES (16 bytes) and HMAC
(32 bytes) keys. It is not recommended to have a password shorter than
32 bytes, and there is no need for a password longer than 32 bytes.
* Add documentation section for signing debug
* Add nRF5 encryption to simple signing option
* Restructure MySigning documentation
* Minor fixes for Linux
tekka
Marcelo Aquino
thucar
kvoit
d00616
Mikael Falkvidd
Patrick Fallberg
bilbolodz
Krister W
Mikael Falkvidd git@mjo.se
Rainer Clasen