Commit Graph
32 Commits
Author SHA1 Message Date
Mikael Falkvidd bb80732ead Add keywords that already have Doxygen (#1108)
Found some keywords that already have Doxygen comments
but were not present in keywords.txt
2018-04-09 23:27:19 +02:00
tekka eaf1b9452b ESP32: Support HW (#865)
This fixes https://github.com/mysensors/MySensors/issues/968
2018-04-07 14:46:01 +02:00
Mikael Falkvidd 9809eb6270 Add missing keywords 2 (#1087)
* Add missing keywords and blacklist

These keywords already exist in Doxygen and should be highlighted
in the Arduino IDE.

Some keywords should not be highlighed and are therefore added
to the blacklists at end of keywords.txt

* Sort keywords in each section

* Add blacklist of MY_MQTT_TOPIC_PREFIX
2018-04-05 22:25:05 +02:00
thucar 4d90c00f98 MY_GATEWAY_TINYGSM support. GSM gateway using a modem module (#1097)
Added TinyGSM driver and GatewayGSMMQTTClient example
2018-04-04 16:40:11 +02:00
Mikael Falkvidd c9c461846a Add missing keywords (#1084)
A blacklist is available at the end of keywords.txt

I decided to blacklist all the LINUX keywords. I guess people
could use the Arduino IDE to edit the sketch for the raspberry
pi gateway, but I'm not sure we should encourage that.

I'll add gitler support for auto-detecting missing keywords
in a separate PR.
2018-03-21 15:08:02 +01:00
tekka 0bc3ac9cb3 RFM95: Updates and optimizations (#1063) 2018-02-18 21:05:25 +01:00
Patrick Fallberg 8a1f5f4cf9 Revamp the simple password flag and rPi fixes (#1056)
MY_SIGNING_SIMPLE_PASSWD is now
called MY_SECURITY_SIMPLE_PASSWD.
MY_SIGNING_SIMPLE_PASSWD only affects signing,
and a new flag, MY_ENCRYPTION_SIMPLE_PASSWD
only affects encryption.
MY_SECURITY_SIMPLE_PASSWD enable both these flags.

The rPi port has been improved to support more
security settings and it is now also possible to
enable encryption for RFM69 transport.

Documentation has been improved to provide a
"Security" section under "Library customisation"
which has a table that summarize all security
related configuration flags, and the corresponding
rPi configuration flags.

The signing personalization documentation has been
updated to include the procedure for rPi.

Fixes #1055
2018-02-11 11:22:48 +01:00
Miloslav Kazda 7ed54423fb RFM69 - add keyword MY_RFM69_IRQ_PIN (#1052)
* Add MY_RFM69_IRQ_PIN keyword

Add MY_RFM69_IRQ_PIN into keywords.txt
2018-02-02 12:37:53 +01:00
rejoe2 b148d828ad Add MY_RS485_SOH_COUNT option (#1014) 2017-12-18 16:57:53 +01:00
per1234 6337b8bf71 Use correct separator in keywords.txt (#1008)
The Arduino IDE currently requires the use of a tab separator between
the name and identifier. Without this tab the keyword is not
highlighted.
2017-12-06 23:03:39 +01:00
Lee Nelson bfcb125e72 Add MY_DEBUGDEVICE to redirect debug output (#1006)
* Add MY_DEBUGDEVICE to redirect debug output

MY_DEBUGDEVICE, if defined, will replace MY_SERIALDEVICE
for the purpose of printing debug messages. This only
applies to debugging.
2017-12-03 19:34:58 +01:00
Mikael Falkvidd 3ebeb4fea1 Add MY_ESP8266_BSSID parameter (#953)
To use this feature, add the following to a sketch, for example
GatewayESP8266MQTTClient:
  const uint8_t bssid[] = {0x00, 0xDE, 0xAD, 0xBE, 0xEF, 0x00};
  #define MY_ESP8266_BSSID bssid

This feature was requested in
https://github.com/mysensors/MySensors/issues/947
2017-10-27 18:52:21 +02:00
d00616 8412a3d360 New OTA debugging and logging feature (#913) (#913) 2017-09-18 20:58:44 +02:00
Marcelo Aquino e5221689af Fix keywords.txt (#883)
Replace spaces with tabs.
2017-06-21 20:04:12 +02:00
d00616 e6925f69e8 Update more usage of hwGetentropy() (#869)
* Update more usage of hwGetentropy()

* Add hwGetentropy() to Teensy 3.5/3.6
2017-06-03 21:58:40 +02:00
Marcelo Aquino 28c4f3f19e Signing improvements package (#871)
* Signing support with MAX_PAYLOAD>32

Support in the signing backends to handle configurations
where MAX_PAYLOAD is more than 32 bytes.

Fixes #748

* Support big message signatures

Support for signing messages larger than 32 bytes.
This is not fully testable with the current version of
the library but the change would add theoretical support
for signing any sized messages.

Fixes #749

* Have gw properly indicate whitelisting preferences

If the gateway hold a signing whitelist, inform all
nodes of this requirement and not just nodes that hold
whitelists themselves.

Fixes #806

* Harden security

The flag MY_SIGNING_GW_REQUEST_SIGNATURES_FROM_ALL
has been removed. Gateway will now request signatures
from everyone by default.
In addition to this, no nodes in the network will allow
clearing of signing/whitelisting preferences by OTA
commands by default.
If the old behaviour is needed (suitable for gradual
signing roll out and development purposes) a new flag,
MY_SIGNING_WEAK_SECURITY can be set.

Fixes #807

* Signing debug messages rewritten

All signing related debug has been rewritten to
better match other core debug printouts.
Also, backends are updated to have a smaller
implementation delta.

* Simplified signing option implemented

Enable by MY_SIGNING_SIMPLE_PASSWD. Signing, and signing requirements
will be enabled, as will encryption. Whitelisting is optional.
The value provided to MY_SIGNING_SIMPLE_PASSWD is used as HMAC and AES
key. Whitelists use the first 8 bytes of the password and the ninth
byte from the node ID as serial.
Password is required to be at least 8 characters wide. It is zero
padded if it is not long enough to cover the AES (16 bytes) and HMAC
(32 bytes) keys. It is not recommended to have a password shorter than
32 bytes, and there is no need for a password longer than 32 bytes.

* Add documentation section for signing debug

* Add nRF5 encryption to simple signing option

* Restructure MySigning documentation

* Minor fixes for Linux
2017-05-31 17:13:29 +02:00
d00616 726a20dad9 Add nrf5 platform (#830)
* Add NVRAM support

This is an EEPROM replacement based on MCU's internal Flash memory.
The NVRAM class is designed to be stateless. Each operation is
written to flash immediately.

The last 16k(nRF51)/32k(nRF52) of Flash memory are managed by the
VirtualPage class.  This class allows writing a single emulated 4k
page up 40,000 times.

The NVRAM class is a log based byte-wise storage allowing up to
40,000,000 writes depending on the number of used addresses.  Each
four allocated addresses from the beginning of the NVRAM reduce the
write log by one.

When first 256 bytes of the emulated storage are used, there is an
average writing capacity of 145,000 cycles per byte.

When the write log is full, the NVRAM is compressed into a new flash
page. After a new page is ready, the old page is released. This
process can take up to 4500 ms and cannot be interrupted.

The NVRAM functionality can easily be ported to ESP8266 or SAMD by
providing a Flash interface.

* Add NRF5 platform support

This is the support of the Nordic Semiconductor NRF51 (nrf51822,
nrf51422) and NRF52 (nrf52832) platform. Based on arduino-nRF5
(https://github.com/sandeepmistry/arduino-nRF5).

The included radio driver is compatible with the NRF24 devices.
Using a SoftDevice (BLE)is not supported and must be removed before
flashing MySensors with a "mass_erase" operation.
2017-05-14 11:53:01 +02:00
Olivier 818f887926 Polishing code (#803) 2017-04-02 20:03:59 +02:00
Olivier b132a8a81e Transport update (#722)
* Major transport rework

* Adjust signal report calculations

* Minor driver optimizations

* Implement sanity check in legacy RFM69 driver

* Additional RFM69 rework

* RFM95 encryption

* Polishing
2017-03-28 20:31:08 +02:00
Dustin ef42b3b534 MQTT Client Retain Feature (#793)
Optionally allow MQTT client to publish specific messages with
the retain flag set.

default/current behavior should not be impacted.
2017-03-21 14:47:07 +01:00
Olivier 37b7885c7e Merge development & additional optimizations 2016-11-20 21:09:00 +01:00
Henrik Ekblad 9037924f06 Merge pull request #621 from tekka007/TransportRFM95
Implement RFM95 transport layer
2016-11-16 20:40:34 +01:00
Olivier 144c7b9d2f Implement RFM95 transport layer 2016-11-14 21:33:11 +01:00
Marcelo Aquino 76dea1532c RPi: Add support for RS485 transport
Remove serial print from MyTransportRS485.cpp to increase speed.
2016-10-21 09:01:37 -02:00
Patrick Fallberg afd7b7abbb Add MY_SIGNING_GW_REQUEST_SIGNATURES_FROM_ALL flag
This flag, when set in a gateway sketch will make the gateway
require all nodes to sign messages sent to it.
2016-10-18 22:02:19 +02:00
Marcelo Aquino ebdaedb514 Add ESP8266 Serial modes
SERIAL_TX_ONLY allows to use RX (GPIO3) as a general purpose
input/output
SERIAL_RX_ONLY allows to use TX (GPIO1) as a general purpose
input/output
2016-08-28 09:37:31 -03:00
Thomas Mørch 15b46f8023 Fixes LED issues as discussed in #562
Removing MY_LED_BLINKING_FEATURE, as we now are
using MY_DEFAULT_LED_xx_PIN defines to enable
LED blinking feature.

updated Gateway sketches to not refer to
MY_LED_BLINKING_FEATURE any more

fixes #562
2016-08-20 09:35:49 +02:00
tekka007 9dcb06cdc5 Reorganize RX message buffering checks
- fix doxygen warning
2016-08-13 13:07:16 +02:00
tekka007 6bc113208c MySensor keyword obsolete 2016-08-06 09:13:38 +02:00
Embedded Innovation 99973a346e Add nRF24 receive message buffering (#538)
* Add critical section support

Allows defining a code block which is executed as a critical section.
Supports AVR, ESP8266 & SAMD.

* Add receive message buffering

When MY_RF24_IRQ_PIN is defined (and connected), a buffer will be used
to retrieve & store messages received by nRF24 as fast as possible.
This reduces the chance of losing messages due to a busy
microcontroller.
nRF24 SPI rx message transfer is running from interrupt context when
MY_RF24_IRQ_PIN is defined. If this transfer takes too long, serial
characters received will get lost. Therefore serial rx is enabled during
SPI transfer of nRF messages.

Limitations: Only AVR/SAMD & nRF24L01+ combinations can buffer rx
messages.
nRF24L01+ IRQ pin should be connected to AVR.
Tested on W5100- & Serial-gateway.

SAMD has not been tested yet!

* Fix Doxygen warnings

* Fix more Doxygen warnings
2016-08-02 22:20:25 +02:00
Brenda Wallace ea99e4735d Added MY_CONTROLLER_URL_ADDRESS to keywords
Signed-off-by: Brenda Wallace <brenda@wallace.net.nz>
2016-07-31 16:43:58 +12:00
Thomas Mørch ba6bb915c2 Reorganizing library structure, prep for 2.0.0 2016-07-09 21:17:37 +02:00