/* * The MySensors Arduino library handles the wireless radio link and protocol * between your home built sensors/actuators and HA controller of choice. * The sensors forms a self healing radio network with optional repeaters. Each * repeater and gateway builds a routing tables in EEPROM which keeps track of the * network topology allowing messages to be routed to nodes. * * Created by Henrik Ekblad * Copyright (C) 2013-2016 Sensnology AB * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors * * Documentation: http://www.mysensors.org * Support Forum: http://forum.mysensors.org * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * * Based on Mike McCauley's RFM95 library, Copyright (C) 2014 Mike McCauley * Radiohead http://www.airspayce.com/mikem/arduino/RadioHead/index.html * RFM95 driver refactored and optimized for MySensors, Copyright (C) 2016 Olivier Mauti * * Changelog: * - ACK with sequenceNumber * - ATC control * * Definitions for HopeRF LoRa radios: * http://www.hoperf.com/upload/rf/RFM95_96_97_98W.pdf * http://www.hoperf.cn/upload/rfchip/RF96_97_98.pdf * */ /** * @file RFM95.h * * @defgroup RFM95grp RFM95 * @ingroup internals * @{ * * RFM95 driver-related log messages, format: [!]SYSTEM:[SUB SYSTEM:]MESSAGE * - [!] Exclamation mark is prepended in case of error * * This section is WIP! * * |E| SYS | SUB | Message | Comment * |-|-------|----------|-----------------------------------|--------------------------------------------------------------------- * | | RFM95 | INIT | | Initialise RFM95 radio * | | RFM95 | RCV | SEND ACK | ACK request received, sending ACK back * | | RFM95 | PTC | LEVEL=%d | Set TX power level * | | RFM95 | SAC | SEND ACK TO=%d,RSSI=%d | Send ACK to node (TO), RSSI of received message (RSSI) * | | RFM95 | ATC | ADJ TXL,cR=%d,tR=%d,TXL=%d | Adjust TX level, current RSSI (cR), target RSSI (tR), TX level (TXL) * | | RFM95 | SWR | SEND TO=%d,RETRY=%d | Send message to (TO), NACK retry counter (RETRY) * | | RFM95 | SWR | ACK FROM=%d,SEQ=%d,RSSI=%d,SNR=%d | ACK received from node (FROM), seq ID (SEQ), (RSSI), (SNR) * |!| RFM95 | SWR | NACK | No ACK received * * * RFM95 modem configuration * * BW = Bandwidth in kHz * CR = Error correction code * SF = Spreading factor, chips / symbol * * | CONFIG | REG_1D | REG_1E | REG_26 | BW | CR | SF | Comment * |------------------|--------|--------|--------|-------|-----|------|----------------------------- * | BW125CR45SF128 | 0x72 | 0x74 | 0x04 | 125 | 4/5 | 128 | Default, medium range * | BW500CR45SF128 | 0x92 | 0x74 | 0x04 | 500 | 4/5 | 128 | Fast, short range * | BW31_25CR48SF512 | 0x48 | 0x94 | 0x04 | 31.25 | 4/8 | 512 | Slow, long range * | BW125CR48SF4096 | 0x78 | 0xC4 | 0x0C | 125 | 4/8 | 4096 | Slow, long range * * @brief API declaration for RFM95 * */ #ifndef _RFM95_h #define _RFM95_h #if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328PB__) || defined(__AVR_ATmega88) || defined(__AVR_ATmega8__) || defined(__AVR_ATmega88__) #define RFM95_IRQ_PIN (2) #define RFM95_RST_PIN (9) #elif defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__) #define RFM95_IRQ_PIN (2) #define RFM95_RST_PIN (9) #elif defined(__AVR_ATmega32U4__) #define RFM95_IRQ_PIN (3) #define RFM95_RST_PIN (9) #elif defined(__arm__) #define RFM95_IRQ_PIN (10) #define RFM95_RST_PIN (27) #else #define RFM95_IRQ_PIN (2) //!< RFM95_IRQ_PIN #define RFM95_RST_PIN (9) //!< RFM95_IRQ_PIN #endif // SPI settings #define RFM95_SPI_CS (SS) //!< SPI CS/SS pin #if !defined(MY_RFM95_SPI_MAX_SPEED) #define MY_RFM95_SPI_MAX_SPEED 4000000 //!< SPI speed #endif #define MY_RFM95_SPI_DATA_ORDER MSBFIRST //!< SPI data order #define MY_RFM95_SPI_DATA_MODE SPI_MODE0 //!< SPI mode #if defined (ARDUINO) && !defined (__arm__) && !defined (_SPI) #include #if defined(MY_SOFTSPI) SoftSPI _SPI; #else #define _SPI SPI #endif #else #if defined(__arm__) #include #else extern HardwareSPI SPI; //!< SPI #endif #if !defined(_SPI) #define _SPI SPI //!< SPI #endif #endif // debug #if defined(MY_DEBUG_VERBOSE_RFM95) #define RFM95_DEBUG(x,...) debug(x, ##__VA_ARGS__) //!< Debug print #else #define RFM95_DEBUG(x,...) //!< Debug null #endif #define RFM95_FIFO_SIZE (0xFFu) //!< Max number of bytes the LORA Rx/Tx FIFO can hold #define RFM95_RX_FIFO_ADDR (0x00u) //!< RX FIFO addr pointer #define RFM95_TX_FIFO_ADDR (0x80u) //!< TX FIFO addr pointer #define RFM95_MAX_PACKET_LEN (0x40u) //!< This is the maximum number of bytes that can be carried by the LORA #define RFM95_PREAMBLE_LENGTH (8u) //!< Preamble length, default=8 #define RFM95_CAD_TIMEOUT_MS (2*1000ul) //!< channel activity detection timeout #define RFM95_FXOSC (32000000.0f) //!< The crystal oscillator frequency of the module #define RFM95_FSTEP (RFM95_FXOSC / 524288ul) //!< The Frequency Synthesizer step = RFM95_FXOSC / #define RFM95_PACKET_HEADER_VERSION (1u) //!< RFM95 packet header version #define RFM95_MIN_PACKET_HEADER_VERSION (1u) //!< Minimal RFM95 packet header version #define RFM95_RETRIES (2u) //!< Retries in case of failed transmission #define RFM95_RETRY_TIMEOUT_MS (500ul) //!< Timeout for ACK, adjustments needed if modem configuration changed (air time different) #define RFM95_BIT_ACK_REQUESTED (7u) //!< RFM95 header, controlFlag, bit 7 #define RFM95_BIT_ACK_RECEIVED (6u) //!< RFM95 header, controlFlag, bit 6 #define RFM95_BIT_ACK_RSSI_REPORT (5u) //!< RFM95 header, controlFlag, bit 5 #define RFM95_BROADCAST_ADDRESS (255u) //!< Broadcasting address #define RFM95_RSSI_OFFSET (137u) //!< RSSI offset #define RFM95_TARGET_RSSI (-60) //!< RSSI target #define RFM95_PROMISCUOUS (false) //!< RFM95 promiscuous mode #define RFM95_getACKRequested(__value) ((bool)bitRead(__value, RFM95_BIT_ACK_REQUESTED)) //!< getACKRequested #define RFM95_setACKRequested(__value, __flag) bitWrite(__value, RFM95_BIT_ACK_REQUESTED,__flag) //!< setACKRequested #define RFM95_getACKReceived(__value) ((bool)bitRead(__value, RFM95_BIT_ACK_RECEIVED)) //!< getACKReceived #define RFM95_setACKReceived(__value, __flag) bitWrite(__value, RFM95_BIT_ACK_RECEIVED,__flag) //!< setACKReceived #define RFM95_setACKRSSIReport(__value, __flag) bitWrite(__value, RFM95_BIT_ACK_RSSI_REPORT,__flag) //!< setACKRSSIReport #define RFM95_getACKRSSIReport(__value) ((bool)bitRead(__value, RFM95_BIT_ACK_RSSI_REPORT)) //!< getACKRSSIReport // RFM95 radio configurations: reg_1d, reg_1e, reg_26 (see datasheet) #define RFM95_BW125CR45SF128 RFM95_BW_125KHZ | RFM95_CODING_RATE_4_5, RFM95_SPREADING_FACTOR_128CPS | RFM95_RX_PAYLOAD_CRC_ON, RFM95_AGC_AUTO_ON //!< 0x72,0x74,0x04 #define RFM95_BW500CR45SF128 RFM95_BW_500KHZ | RFM95_CODING_RATE_4_5, RFM95_SPREADING_FACTOR_128CPS | RFM95_RX_PAYLOAD_CRC_ON, RFM95_AGC_AUTO_ON //!< 0x92,0x74,0x04 #define RFM95_BW31_25CR48SF512 RFM95_BW_31_25KHZ | RFM95_CODING_RATE_4_8, RFM95_SPREADING_FACTOR_512CPS | RFM95_RX_PAYLOAD_CRC_ON, RFM95_AGC_AUTO_ON //!< 0x48,0x94,0x04 #define RFM95_BW125CR48SF4096 RFM95_BW_125KHZ | RFM95_CODING_RATE_4_8, RFM95_SPREADING_FACTOR_4096CPS | RFM95_RX_PAYLOAD_CRC_ON, RFM95_AGC_AUTO_ON | RFM95_LOW_DATA_RATE_OPTIMIZE //!< 0x78,0xc4,0x0C #define RFM95_MIN_POWER_LEVEL_DBM (5u) //!< min. power level #define RFM95_MAX_POWER_LEVEL_DBM (23u) //!< max. power level /** * @brief Radio modes */ typedef enum { RFM95_RADIO_MODE_RX = 0, //!< RX mode RFM95_RADIO_MODE_TX = 1, //!< TX mode RFM95_RADIO_MODE_CAD = 2, //!< CAD mode RFM95_RADIO_MODE_SLEEP = 3, //!< SLEEP mode RFM95_RADIO_MODE_STDBY = 4 //!< STDBY mode } rfm95_radioMode_t; /** * @brief RFM95 modem config registers */ typedef struct { uint8_t reg_1d; //!< Value for register REG_1D_MODEM_CONFIG1 uint8_t reg_1e; //!< Value for register REG_1E_MODEM_CONFIG2 uint8_t reg_26; //!< Value for register REG_26_MODEM_CONFIG3 } rfm95_modemConfig_t; /** * @brief Sequence number data type */ typedef uint16_t rfm95_sequenceNumber_t; /** * @brief RSSI data type */ typedef uint8_t rfm95_RSSI_t; /** * @brief SNR data type */ typedef int8_t rfm95_SNR_t; /** * @brief Control flag data type */ typedef uint8_t rfm95_flag_t; /** * @brief RFM95 LoRa header */ typedef struct { uint8_t version; //!< Header version uint8_t recipient; //!< Payload recipient uint8_t sender; //!< Payload sender rfm95_flag_t controlFlags; //!< Control flags, used for ACK rfm95_sequenceNumber_t sequenceNumber; //!< Packet sequence number, used for ACK } __attribute__((packed)) rfm95_header_t; /** * @brief RFM95 LoRa ACK packet structure */ typedef struct { rfm95_sequenceNumber_t sequenceNumber; //!< sequence number rfm95_RSSI_t RSSI; //!< RSSI rfm95_SNR_t SNR; //!< SNR } __attribute__((packed)) rfm95_ack_t; #define RFM95_HEADER_LEN sizeof(rfm95_header_t) //!< Size header inside LoRa payload #define RFM95_MAX_PAYLOAD_LEN (RFM95_MAX_PACKET_LEN - RFM95_HEADER_LEN) //!< Max payload length /** * @brief LoRa packet structure */ typedef struct { union { struct { rfm95_header_t header; //!< LoRa header union { uint8_t payload[RFM95_MAX_PAYLOAD_LEN]; //!< Payload, i.e. MySensors message rfm95_ack_t ACK; //!< Union: ACK }; }; uint8_t data[RFM95_MAX_PACKET_LEN]; //!< RAW }; uint8_t payloadLen; //!< Length of payload (excluding header) rfm95_RSSI_t RSSI; //!< RSSI of current packet, RSSI = value - 137 rfm95_SNR_t SNR; //!< SNR of current packet } __attribute__((packed)) rfm95_packet_t; /** * @brief RFM95 internal variables */ typedef struct { uint8_t address; //!< Node address rfm95_packet_t currentPacket; //!< Buffer for current packet rfm95_sequenceNumber_t txSequenceNumber; //!< RFM95_txSequenceNumber uint8_t powerLevel; //!< TX power level dBm uint8_t ATCtargetRSSI; //!< ATC: target RSSI // 8 bit rfm95_radioMode_t radioMode : 3; //!< current transceiver state bool cad : 1; //!< RFM95_cad bool rxBufferValid : 1; //!< RX buffer valid bool ATCenabled : 1; //!< ATC enabled uint8_t reserved : 2; //!< reserved } rfm95_internal_t; #define LOCAL static //!< static /** * @brief Initialise the driver transport hardware and software * @param frequency * @return True if initialisation succeeded */ LOCAL bool RFM95_initialise(const float frequency); /** * @brief Set the driver/node address * @param addr */ LOCAL void RFM95_setAddress(const uint8_t addr); /** * @brief Get driver/node address * @return Node address */ LOCAL uint8_t RFM95_getAddress(void); /** * @brief Sets all the registered required to configure the data modem in the RF95/96/97/98, including the * bandwidth, spreading factor etc. * @param config See modemConfig_t and references therein */ LOCAL void RFM95_setModemRegisters(const rfm95_modemConfig_t config); /** * @brief Tests whether a new message is available * @return True if a new, complete, error-free uncollected message is available to be retreived by @ref RFM95_recv() */ LOCAL bool RFM95_available(void); /** * @brief If a valid message is received, copy it to buf and return length. 0 byte messages are permitted. * @param buf Location to copy the received message * @return Number of bytes */ LOCAL uint8_t RFM95_recv(uint8_t* buf); /** * @brief RFM95_send * @param packet * @return True if packet sent */ LOCAL bool RFM95_send(rfm95_packet_t &packet); /** * @brief RFM95_sendFrame * @param recipient * @param data * @param len * @param flags * @return True if frame sent */ LOCAL bool RFM95_sendFrame(const uint8_t recipient, uint8_t* data, const uint8_t len, const rfm95_flag_t flags); /** * @brief RFM95_setPreambleLength * @param preambleLength */ LOCAL void RFM95_setPreambleLength(const uint16_t preambleLength); /** * @brief Sets the transmitter and receiver centre frequency * @param centre Frequency in MHz (137.0 to 1020.0) */ LOCAL void RFM95_setFrequency(const float centre); /** * @brief Sets the transmitter power output level, and configures the transmitter pin * @param powerLevel Transmitter power level in dBm (+5 to +23) * @return True power level adjusted */ LOCAL bool RFM95_setTxPower(uint8_t powerLevel); /** * @brief Sets the radio into low-power sleep mode * @return true if sleep mode was successfully entered */ LOCAL bool RFM95_sleep(void); /** * @brief Use the radio's Channel Activity Detect (CAD) function to detect channel activity * @return true if channel is in use */ LOCAL bool RFM95_isChannelActive(void); /** * @brief RFM95_sendACK * @param recipient * @param sequenceNumber * @param RSSI (rfm95_RSSI_t) * @param SNR (rfm95_RSSI_t) */ LOCAL void RFM95_sendACK(const uint8_t recipient, const rfm95_sequenceNumber_t sequenceNumber, const rfm95_RSSI_t RSSI, const rfm95_RSSI_t SNR); /** * @brief RFM95_sendWithRetry * @param recipient * @param buffer * @param bufferSize * @param retries * @param retryWaitTime * @return True if packet successfully sent */ LOCAL bool RFM95_sendWithRetry(const uint8_t recipient, const void* buffer, const uint8_t bufferSize, const uint8_t retries = RFM95_RETRIES, const uint32_t retryWaitTime = RFM95_RETRY_TIMEOUT_MS); /** * @brief RFM95_waitCAD * @return True if no channel activity detected */ LOCAL bool RFM95_waitCAD(void); /** * @brief RFM95_waitPacketSent * @return True if packet sent */ LOCAL bool RFM95_waitPacketSent(void); /** * @brief RFM95_setRadioMode * @param newRadioMode * @return True if mode changed */ LOCAL bool RFM95_setRadioMode(const rfm95_radioMode_t newRadioMode); /** * @brief Low level interrupt handler */ LOCAL void RFM95_interruptHandler(void); /** * @brief RFM95_clearRxBuffer */ LOCAL void RFM95_clearRxBuffer(void); /** * @brief RFM95_getSNR * @return SNR Signal strength of last packet */ LOCAL int16_t RFM95_getSNR(void); /** * @brief RFM95_getRSSI * @return RSSI Signal strength of last packet */ LOCAL int16_t RFM95_getRSSI(void); /** * @brief RFM_executeATC * @param currentRSSI * @param targetRSSI * @return True if power level adjusted */ LOCAL bool RFM95_executeATC(const rfm95_RSSI_t currentRSSI, const rfm95_RSSI_t targetRSSI); /** * @brief RFM95_getTxPower * @return Current power level */ LOCAL int8_t RFM95_getTxPower(void); /** * @brief RFM95_ATCmode * @param targetRSSI Target RSSI for transmitter (default -60) * @param OnOff True to enable ATC */ LOCAL void RFM95_ATCmode(const bool OnOff, const int16_t targetRSSI = RFM95_TARGET_RSSI); volatile rfm95_internal_t RFM95; //!< internal variables // Register access #define RFM95_READ_REGISTER (0x7Fu) //!< reading register #define RFM95_WRITE_REGISTER (0x80u) //!< writing register // Registers, available LoRa mode #define RFM95_REG_00_FIFO 0x00 //!< REG_00_FIFO #define RFM95_REG_01_OP_MODE 0x01 //!< REG_01_OP_MODE #define RFM95_REG_02_RESERVED 0x02 //!< REG_02_RESERVED #define RFM95_REG_03_RESERVED 0x03 //!< REG_03_RESERVED #define RFM95_REG_04_RESERVED 0x04 //!< REG_04_RESERVED #define RFM95_REG_05_RESERVED 0x05 //!< REG_05_RESERVED #define RFM95_REG_06_FRF_MSB 0x06 //!< REG_06_FRF_MSB #define RFM95_REG_07_FRF_MID 0x07 //!< REG_07_FRF_MID #define RFM95_REG_08_FRF_LSB 0x08 //!< REG_08_FRF_LSB #define RFM95_REG_09_PA_CONFIG 0x09 //!< REG_09_PA_CONFIG #define RFM95_REG_0A_PA_RAMP 0x0a //!< REG_0A_PA_RAMP #define RFM95_REG_0B_OCP 0x0b //!< REG_0B_OCP #define RFM95_REG_0C_LNA 0x0c //!< REG_0C_LNA #define RFM95_REG_0D_FIFO_ADDR_PTR 0x0d //!< REG_0D_FIFO_ADDR_PTR #define RFM95_REG_0E_FIFO_TX_BASE_ADDR 0x0e //!< REG_0E_FIFO_TX_BASE_ADDR #define RFM95_REG_0F_FIFO_RX_BASE_ADDR 0x0f //!< REG_0F_FIFO_RX_BASE_ADDR #define RFM95_REG_10_FIFO_RX_CURRENT_ADDR 0x10 //!< REG_10_FIFO_RX_CURRENT_ADDR #define RFM95_REG_11_IRQ_FLAGS_MASK 0x11 //!< REG_11_IRQ_FLAGS_MASK #define RFM95_REG_12_IRQ_FLAGS 0x12 //!< REG_12_IRQ_FLAGS #define RFM95_REG_13_RX_NB_BYTES 0x13 //!< REG_13_RX_NB_BYTES #define RFM95_REG_14_RX_HEADER_CNT_VALUE_MSB 0x14 //!< REG_14_RX_HEADER_CNT_VALUE_MSB #define RFM95_REG_15_RX_HEADER_CNT_VALUE_LSB 0x15 //!< REG_15_RX_HEADER_CNT_VALUE_LSB #define RFM95_REG_16_RX_PACKET_CNT_VALUE_MSB 0x16 //!< REG_16_RX_PACKET_CNT_VALUE_MSB #define RFM95_REG_17_RX_PACKET_CNT_VALUE_LSB 0x17 //!< REG_17_RX_PACKET_CNT_VALUE_LSB #define RFM95_REG_18_MODEM_STAT 0x18 //!< REG_18_MODEM_STAT #define RFM95_REG_19_PKT_SNR_VALUE 0x19 //!< REG_19_PKT_SNR_VALUE #define RFM95_REG_1A_PKT_RSSI_VALUE 0x1a //!< REG_1A_PKT_RSSI_VALUE #define RFM95_REG_1B_RSSI_VALUE 0x1b //!< REG_1B_RSSI_VALUE #define RFM95_REG_1C_HOP_CHANNEL 0x1c //!< REG_1C_HOP_CHANNEL #define RFM95_REG_1D_MODEM_CONFIG1 0x1d //!< REG_1D_MODEM_CONFIG1 #define RFM95_REG_1E_MODEM_CONFIG2 0x1e //!< REG_1E_MODEM_CONFIG2 #define RFM95_REG_1F_SYMB_TIMEOUT_LSB 0x1f //!< REG_1F_SYMB_TIMEOUT_LSB #define RFM95_REG_20_PREAMBLE_MSB 0x20 //!< REG_20_PREAMBLE_MSB #define RFM95_REG_21_PREAMBLE_LSB 0x21 //!< REG_21_PREAMBLE_LSB #define RFM95_REG_22_PAYLOAD_LENGTH 0x22 //!< REG_22_PAYLOAD_LENGTH #define RFM95_REG_23_MAX_PAYLOAD_LENGTH 0x23 //!< REG_23_MAX_PAYLOAD_LENGTH #define RFM95_REG_24_HOP_PERIOD 0x24 //!< REG_24_HOP_PERIOD #define RFM95_REG_25_FIFO_RX_BYTE_ADDR 0x25 //!< REG_25_FIFO_RX_BYTE_ADDR #define RFM95_REG_26_MODEM_CONFIG3 0x26 //!< REG_26_MODEM_CONFIG3 // Reserved when in LoRa mode #define RFM95_REG_40_DIO_MAPPING1 0x40 //!< REG_40_DIO_MAPPING1 #define RFM95_REG_41_DIO_MAPPING2 0x41 //!< REG_41_DIO_MAPPING2 #define RFM95_REG_42_VERSION 0x42 //!< REG_42_VERSION #define RFM95_REG_4B_TCXO 0x4b //!< REG_4B_TCXO #define RFM95_REG_4D_PA_DAC 0x4d //!< REG_4D_PA_DAC #define RFM95_REG_5B_FORMER_TEMP 0x5b //!< REG_5B_FORMER_TEMP #define RFM95_REG_61_AGC_REF 0x61 //!< REG_61_AGC_REF #define RFM95_REG_62_AGC_THRESH1 0x62 //!< REG_62_AGC_THRESH1 #define RFM95_REG_63_AGC_THRESH2 0x63 //!< REG_63_AGC_THRESH2 #define RFM95_REG_64_AGC_THRESH3 0x64 //!< REG_64_AGC_THRESH3 // RFM95_REG_01_OP_MODE 0x01 #define RFM95_LONG_RANGE_MODE 0x80 //!< LONG_RANGE_MODE #define RFM95_ACCESS_SHARED_REG 0x40 //!< ACCESS_SHARED_REG #define RFM95_MODE_SLEEP 0x00 //!< MODE_SLEEP #define RFM95_MODE_STDBY 0x01 //!< MODE_STDBY #define RFM95_MODE_FSTX 0x02 //!< MODE_FSTX #define RFM95_MODE_TX 0x03 //!< MODE_TX #define RFM95_MODE_FSRX 0x04 //!< MODE_FSRX #define RFM95_MODE_RXCONTINUOUS 0x05 //!< MODE_RXCONTINUOUS #define RFM95_MODE_RXSINGLE 0x06 //!< MODE_RXSINGLE #define RFM95_MODE_CAD 0x07 //!< MODE_CAD // RFM95_REG_09_PA_CONFIG 0x09 #define RFM95_OUTPUT_POWER 0x0F //!< OUTPUT_POWER #define RFM95_MAX_POWER 0x70 //!< MAX_POWER #define RFM95_PA_SELECT 0x80 //!< PA_SELECT // RFM95_REG_0A_PA_RAMP 0x0a #define RFM95_PA_RAMP_3_4MS 0x00 //!< PA_RAMP_3_4MS #define RFM95_PA_RAMP_2MS 0x01 //!< PA_RAMP_2MS #define RFM95_PA_RAMP_1MS 0x02 //!< PA_RAMP_1MS #define RFM95_PA_RAMP_500US 0x03 //!< PA_RAMP_500US #define RFM95_PA_RAMP_250US 0x04 //!< PA_RAMP_250US #define RFM95_PA_RAMP_125US 0x05 //!< PA_RAMP_125US #define RFM95_PA_RAMP_100US 0x06 //!< PA_RAMP_100US #define RFM95_PA_RAMP_62US 0x07 //!< PA_RAMP_62US #define RFM95_PA_RAMP_50US 0x08 //!< PA_RAMP_50US #define RFM95_PA_RAMP_40US 0x09 //!< PA_RAMP_40US #define RFM95_PA_RAMP_31US 0x0A //!< PA_RAMP_31US #define RFM95_PA_RAMP_25US 0x0B //!< PA_RAMP_25US #define RFM95_PA_RAMP_20US 0x0C //!< PA_RAMP_20US #define RFM95_PA_RAMP_15US 0x0D //!< PA_RAMP_15US #define RFM95_PA_RAMP_12US 0x0E //!< PA_RAMP_12US #define RFM95_PA_RAMP_10US 0x0F //!< PA_RAMP_10US #define RFM95_LOW_PN_TX_PLL_OFF 0x10 //!