305 lines
9.3 KiB
C++
305 lines
9.3 KiB
C++
/*
|
|
* The MySensors Arduino library handles the wireless radio link and protocol
|
|
* between your home built sensors/actuators and HA controller of choice.
|
|
* The sensors forms a self healing radio network with optional repeaters. Each
|
|
* repeater and gateway builds a routing tables in EEPROM which keeps track of the
|
|
* network topology allowing messages to be routed to nodes.
|
|
*
|
|
* Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
|
|
* Copyright (C) 2013-2015 Sensnology AB
|
|
* Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
|
|
*
|
|
* Documentation: http://www.mysensors.org
|
|
* Support Forum: http://forum.mysensors.org
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* version 2 as published by the Free Software Foundation.
|
|
*
|
|
* Based on maniacbug's RF24 library, copyright (C) 2011 J. Coliz <maniacbug@ymail.com>
|
|
* RF24 driver refactored and optimized for speed and size, copyright (C) 2016 Olivier Mauti <olivier@mysensors.org>
|
|
*/
|
|
|
|
#include "RF24.h"
|
|
|
|
LOCAL uint8_t MY_RF24_BASE_ADDR[MY_RF24_ADDR_WIDTH] = { MY_RF24_BASE_RADIO_ID };
|
|
LOCAL uint8_t MY_RF24_NODE_ADDRESS = AUTO;
|
|
|
|
LOCAL void RF24_csn(bool level) {
|
|
digitalWrite(MY_RF24_CS_PIN, level);
|
|
}
|
|
|
|
LOCAL void RF24_ce(bool level) {
|
|
digitalWrite(MY_RF24_CE_PIN, level);
|
|
}
|
|
|
|
LOCAL uint8_t RF24_spiMultiByteTransfer(uint8_t cmd, uint8_t* buf, uint8_t len, bool aReadMode) {
|
|
uint8_t* current = buf;
|
|
#if !defined(MY_SOFTSPI)
|
|
_SPI.beginTransaction(SPISettings(MY_RF24_SPI_MAX_SPEED, MY_RF24_SPI_DATA_ORDER, MY_RF24_SPI_DATA_MODE));
|
|
#endif
|
|
RF24_csn(LOW);
|
|
// timing
|
|
delayMicroseconds(10);
|
|
uint8_t status = _SPI.transfer( cmd );
|
|
while ( len-- ) {
|
|
if (aReadMode) {
|
|
status = _SPI.transfer( NOP );
|
|
if(buf != NULL) *current++ = status;
|
|
} else status = _SPI.transfer(*current++);
|
|
}
|
|
RF24_csn(HIGH);
|
|
#if !defined(MY_SOFTSPI)
|
|
_SPI.endTransaction();
|
|
#endif
|
|
// timing
|
|
delayMicroseconds(10);
|
|
return status;
|
|
}
|
|
|
|
LOCAL uint8_t RF24_spiByteTransfer(uint8_t cmd) {
|
|
return RF24_spiMultiByteTransfer( cmd, NULL, 0, false);
|
|
}
|
|
|
|
LOCAL uint8_t RF24_RAW_readByteRegister(uint8_t cmd) {
|
|
uint8_t value = RF24_spiMultiByteTransfer( cmd, NULL, 1, true);
|
|
RF24_DEBUG(PSTR("RF24:read register, reg=%d, value=%d\n"), cmd & (R_REGISTER ^ 0xFF), value);
|
|
return value;
|
|
}
|
|
|
|
LOCAL uint8_t RF24_RAW_writeByteRegister(uint8_t cmd, uint8_t value) {
|
|
RF24_DEBUG(PSTR("RF24:write register, reg=%d, value=%d\n"), cmd & (W_REGISTER ^ 0xFF), value);
|
|
return RF24_spiMultiByteTransfer( cmd , &value, 1, false);
|
|
}
|
|
|
|
LOCAL void RF24_flushRX(void) {
|
|
RF24_DEBUG(PSTR("RF24:flushRX\n"));
|
|
RF24_spiByteTransfer( FLUSH_RX );
|
|
}
|
|
|
|
LOCAL void RF24_flushTX(void) {
|
|
RF24_DEBUG(PSTR("RF24:flushTX\n"));
|
|
RF24_spiByteTransfer( FLUSH_TX );
|
|
}
|
|
|
|
LOCAL uint8_t RF24_getStatus(void) {
|
|
return RF24_spiByteTransfer( NOP );
|
|
}
|
|
|
|
LOCAL void RF24_setChannel(uint8_t channel) {
|
|
RF24_writeByteRegister(RF_CH, channel);
|
|
}
|
|
|
|
LOCAL void RF24_setRetries(uint8_t retransmitDelay, uint8_t retransmitCount) {
|
|
RF24_writeByteRegister(SETUP_RETR, retransmitDelay << ARD | retransmitCount << ARC);
|
|
}
|
|
|
|
LOCAL void RF24_setAddressWidth(uint8_t width) {
|
|
RF24_writeByteRegister(SETUP_AW, width - 2);
|
|
}
|
|
|
|
LOCAL void RF24_setRFSetup(uint8_t RFsetup) {
|
|
RF24_writeByteRegister(RF_SETUP, RFsetup);
|
|
}
|
|
|
|
LOCAL void RF24_setFeature(uint8_t feature) {
|
|
RF24_writeByteRegister(FEATURE, feature);
|
|
}
|
|
|
|
LOCAL void RF24_setPipe(uint8_t pipe) {
|
|
RF24_writeByteRegister(EN_RXADDR, pipe);
|
|
}
|
|
|
|
LOCAL void RF24_setAutoACK(uint8_t pipe) {
|
|
RF24_writeByteRegister(EN_AA, pipe);
|
|
}
|
|
|
|
LOCAL void RF24_setDynamicPayload(uint8_t pipe) {
|
|
RF24_writeByteRegister(DYNPD, pipe);
|
|
}
|
|
|
|
LOCAL void RF24_setRFConfiguration(uint8_t configuration) {
|
|
RF24_writeByteRegister(NRF_CONFIG, configuration);
|
|
}
|
|
|
|
LOCAL void RF24_setPipeAddress(uint8_t pipe, uint8_t* address, uint8_t width) {
|
|
RF24_writeMultiByteRegister(pipe, address, width);
|
|
}
|
|
|
|
LOCAL void RF24_setPipeLSB(uint8_t pipe, uint8_t LSB) {
|
|
RF24_writeByteRegister(pipe, LSB);
|
|
}
|
|
|
|
LOCAL void RF24_setStatus(uint8_t status) {
|
|
RF24_writeByteRegister(RF24_STATUS, status);
|
|
}
|
|
LOCAL void RF24_enableFeatures(void) {
|
|
RF24_RAW_writeByteRegister(ACTIVATE, 0x73);
|
|
}
|
|
|
|
LOCAL void RF24_openWritingPipe(uint8_t recipient) {
|
|
RF24_DEBUG(PSTR("RF24:open writing pipe, recipient=%d\n"), recipient);
|
|
// only write LSB of RX0 and TX pipe
|
|
RF24_setPipeLSB(RX_ADDR_P0, recipient);
|
|
RF24_setPipeLSB(TX_ADDR, recipient);
|
|
}
|
|
|
|
LOCAL void RF24_startListening(void) {
|
|
RF24_DEBUG(PSTR("RF24:start listening\n"));
|
|
// toggle PRX
|
|
RF24_setRFConfiguration(MY_RF24_CONFIGURATION | _BV(PWR_UP) | _BV(PRIM_RX) );
|
|
// all RX pipe addresses must be unique, therefore skip if node ID is 0xFF
|
|
if(MY_RF24_NODE_ADDRESS!=AUTO) RF24_setPipeLSB(RX_ADDR_P0, MY_RF24_NODE_ADDRESS);
|
|
// start listening
|
|
RF24_ce(HIGH);
|
|
}
|
|
|
|
LOCAL void RF24_stopListening(void) {
|
|
RF24_DEBUG(PSTR("RF24:stop listening\n"));
|
|
RF24_ce(LOW);
|
|
// timing
|
|
delayMicroseconds(130);
|
|
RF24_setRFConfiguration(MY_RF24_CONFIGURATION | _BV(PWR_UP) );
|
|
// timing
|
|
delayMicroseconds(100);
|
|
}
|
|
|
|
LOCAL void RF24_powerDown(void) {
|
|
RF24_ce(LOW);
|
|
RF24_setRFConfiguration(MY_RF24_CONFIGURATION);
|
|
RF24_DEBUG(PSTR("RF24:power down\n"));
|
|
}
|
|
|
|
LOCAL bool RF24_sendMessage( uint8_t recipient, const void* buf, uint8_t len ) {
|
|
uint8_t status;
|
|
|
|
RF24_stopListening();
|
|
RF24_openWritingPipe( recipient );
|
|
RF24_DEBUG(PSTR("RF24:send message to %d, len=%d\n"),recipient,len);
|
|
// flush TX FIFO
|
|
RF24_flushTX();
|
|
// this command is affected in clones (e.g. Si24R1): flipped NoACK bit when using W_TX_PAYLOAD_NO_ACK / W_TX_PAYLOAD
|
|
// RF24_spiMultiByteTransfer( recipient==BROADCAST_ADDRESS ? W_TX_PAYLOAD_NO_ACK : W_TX_PAYLOAD, (uint8_t*)buf, len, false );
|
|
// we are safe by disabling AutoACK on the broadcasting pipe
|
|
RF24_spiMultiByteTransfer( W_TX_PAYLOAD, (uint8_t*)buf, len, false );
|
|
// go, TX starts after ~10us
|
|
RF24_ce(HIGH);
|
|
// timeout counter to detect HW issues
|
|
uint16_t timeout = 0xFFFF;
|
|
do {
|
|
status = RF24_getStatus();
|
|
} while (!(status & ( _BV(MAX_RT) | _BV(TX_DS) )) && timeout--);
|
|
// timeout value after successful TX on 16Mhz AVR ~ 65500, i.e. msg is transmitted after ~36 loop cycles
|
|
RF24_ce(LOW);
|
|
// reset interrupts
|
|
RF24_setStatus(_BV(TX_DS) | _BV(MAX_RT) );
|
|
// Max retries exceeded
|
|
if( status & _BV(MAX_RT)){
|
|
// flush packet
|
|
RF24_DEBUG(PSTR("RF24:MAX_RT\n"));
|
|
RF24_flushTX();
|
|
}
|
|
|
|
RF24_startListening();
|
|
// true if message sent and not timeout
|
|
return (status & _BV(TX_DS) && timeout);
|
|
}
|
|
|
|
LOCAL uint8_t RF24_getDynamicPayloadSize(void) {
|
|
uint8_t result = RF24_spiMultiByteTransfer(R_RX_PL_WID, NULL, 1, true);
|
|
// check if payload size invalid
|
|
if(result > 32) {
|
|
RF24_DEBUG(PSTR("RF24:invalid payload length = %d\n"),result);
|
|
RF24_flushRX();
|
|
result = 0;
|
|
}
|
|
return result;
|
|
}
|
|
|
|
|
|
LOCAL bool RF24_isDataAvailable() {
|
|
uint8_t status = RF24_getStatus();
|
|
return (((status >> RX_P_NO) & 0b0111) <= 5);
|
|
}
|
|
|
|
|
|
LOCAL uint8_t RF24_readMessage( void* buf) {
|
|
uint8_t len = RF24_getDynamicPayloadSize();
|
|
RF24_DEBUG(PSTR("RF24:read message, len=%d\n"), len);
|
|
RF24_spiMultiByteTransfer( R_RX_PAYLOAD , (uint8_t*)buf, len, true );
|
|
// clear RX interrupt
|
|
RF24_setStatus(_BV(RX_DR) );
|
|
return len;
|
|
}
|
|
|
|
LOCAL void RF24_setNodeAddress(uint8_t address) {
|
|
if(address!=AUTO){
|
|
MY_RF24_NODE_ADDRESS = address;
|
|
// enable node pipe
|
|
RF24_setPipe(_BV(ERX_P0 + BROADCAST_PIPE) | _BV(ERX_P0) );
|
|
// enable autoACK on pipe 0
|
|
RF24_setAutoACK(_BV(ENAA_P0) );
|
|
}
|
|
}
|
|
|
|
LOCAL uint8_t RF24_getNodeID(void) {
|
|
return MY_RF24_NODE_ADDRESS;
|
|
}
|
|
|
|
LOCAL bool RF24_sanityCheck(void) {
|
|
// detect HW defect, configuration errors or interrupted SPI line, CE disconnect cannot be detected
|
|
bool status = RF24_readByteRegister(RF_SETUP) == MY_RF24_RF_SETUP;
|
|
status &= RF24_readByteRegister(RF_CH) == MY_RF24_CHANNEL;
|
|
return status;
|
|
}
|
|
|
|
LOCAL bool RF24_initialize(void) {
|
|
// Initialize pins
|
|
pinMode(MY_RF24_CE_PIN,OUTPUT);
|
|
pinMode(MY_RF24_CS_PIN,OUTPUT);
|
|
// Initialize SPI
|
|
_SPI.begin();
|
|
RF24_ce(LOW);
|
|
RF24_csn(HIGH);
|
|
// CRC and power up
|
|
RF24_setRFConfiguration(MY_RF24_CONFIGURATION | _BV(PWR_UP) ) ;
|
|
// settle >2ms
|
|
delay(5);
|
|
// set address width
|
|
RF24_setAddressWidth(MY_RF24_ADDR_WIDTH);
|
|
// auto retransmit delay 1500us, auto retransmit count 15
|
|
RF24_setRetries(RF24_ARD, RF24_ARC);
|
|
// set channel
|
|
RF24_setChannel(MY_RF24_CHANNEL);
|
|
// set data rate and pa level
|
|
RF24_setRFSetup(MY_RF24_RF_SETUP);
|
|
// toggle features (necessary on some clones and non-P versions)
|
|
RF24_enableFeatures();
|
|
// enable ACK payload and dynamic payload
|
|
RF24_setFeature(MY_RF24_FEATURE);
|
|
// sanity check (this function is P/non-P independent)
|
|
if (!RF24_sanityCheck()) {
|
|
RF24_DEBUG(PSTR("!RF24:Sanity check failed: configuration mismatch! Check wiring or replace module\n"));
|
|
return false;
|
|
}
|
|
// enable broadcasting pipe
|
|
RF24_setPipe(_BV(ERX_P0 + BROADCAST_PIPE));
|
|
// disable AA on all pipes, activate when node pipe set
|
|
RF24_setAutoACK(0x00);
|
|
// enable dynamic payloads on used pipes
|
|
RF24_setDynamicPayload(_BV(DPL_P0 + BROADCAST_PIPE) | _BV(DPL_P0));
|
|
// listen to broadcast pipe
|
|
MY_RF24_BASE_ADDR[0] = BROADCAST_ADDRESS;
|
|
RF24_setPipeAddress(RX_ADDR_P0 + BROADCAST_PIPE, (uint8_t*)&MY_RF24_BASE_ADDR, BROADCAST_PIPE > 1 ? 1 : MY_RF24_ADDR_WIDTH);
|
|
// pipe 0, set full address, later only LSB is updated
|
|
RF24_setPipeAddress(RX_ADDR_P0, (uint8_t*)&MY_RF24_BASE_ADDR, MY_RF24_ADDR_WIDTH);
|
|
RF24_setPipeAddress(TX_ADDR, (uint8_t*)&MY_RF24_BASE_ADDR, MY_RF24_ADDR_WIDTH);
|
|
// reset FIFO
|
|
RF24_flushRX();
|
|
RF24_flushTX();
|
|
// reset interrupts
|
|
RF24_setStatus(_BV(TX_DS) | _BV(MAX_RT) | _BV(RX_DR));
|
|
return true;
|
|
}
|
|
|