Henrik Ekblad
2fd948fc66
Upgraded RF24 to latest version which supports SoftSPI. Added DigitalIO and UTFT libraries to support the new example. Fix problem reported in RelayWithButtonActuator example.
62 lines
3.1 KiB
C
62 lines
3.1 KiB
C
case ILI9325D_16ALT:
|
|
LCD_Write_COM_DATA(0xE5, 0x78F0); // set SRAM internal timing
|
|
LCD_Write_COM_DATA(0x01, 0x0100); // set Driver Output Control
|
|
LCD_Write_COM_DATA(0x02, 0x0700); // set 1 line inversion
|
|
LCD_Write_COM_DATA(0x03, 0x1030); // set GRAM write direction and BGR=1.
|
|
LCD_Write_COM_DATA(0x04, 0x0000); // Resize register
|
|
LCD_Write_COM_DATA(0x08, 0x0207); // set the back porch and front porch
|
|
LCD_Write_COM_DATA(0x09, 0x0000); // set non-display area refresh cycle ISC[3:0]
|
|
LCD_Write_COM_DATA(0x0A, 0x0000); // FMARK function
|
|
LCD_Write_COM_DATA(0x0C, 0x0000); // RGB interface setting
|
|
LCD_Write_COM_DATA(0x0D, 0x0000); // Frame marker Position
|
|
LCD_Write_COM_DATA(0x0F, 0x0000); // RGB interface polarity
|
|
//*************Power On sequence ****************//
|
|
LCD_Write_COM_DATA(0x10, 0x0000); // SAP, BT[3:0], AP, DSTB, SLP, STB
|
|
LCD_Write_COM_DATA(0x11, 0x0007); // DC1[2:0], DC0[2:0], VC[2:0]
|
|
LCD_Write_COM_DATA(0x12, 0x0000); // VREG1OUT voltage
|
|
LCD_Write_COM_DATA(0x13, 0x0000); // VDV[4:0] for VCOM amplitude
|
|
LCD_Write_COM_DATA(0x07, 0x0001);
|
|
delay(200); // Dis-charge capacitor power voltage
|
|
LCD_Write_COM_DATA(0x10, 0x1590); // SAP, BT[3:0], AP, DSTB, SLP, STB
|
|
LCD_Write_COM_DATA(0x11, 0x0227); // Set DC1[2:0], DC0[2:0], VC[2:0]
|
|
delay(50); // Delay 50ms
|
|
LCD_Write_COM_DATA(0x12, 0x009C); // 0012
|
|
delay(50); // Delay 50ms
|
|
LCD_Write_COM_DATA(0x13, 0x1900); // VDV[4:0] for VCOM amplitude
|
|
LCD_Write_COM_DATA(0x29, 0x0023); // 04 VCM[5:0] for VCOMH
|
|
LCD_Write_COM_DATA(0x2B, 0x000E); // Set Frame Rate
|
|
delay(50); // Delay 50ms
|
|
LCD_Write_COM_DATA(0x20, 0x0000); // GRAM horizontal Address
|
|
LCD_Write_COM_DATA(0x21, 0x0000); // GRAM Vertical Address
|
|
// ----------- Adjust the Gamma Curve ----------//
|
|
LCD_Write_COM_DATA(0x30, 0x0000);
|
|
LCD_Write_COM_DATA(0x31, 0x0404);
|
|
LCD_Write_COM_DATA(0x32, 0x0003);
|
|
LCD_Write_COM_DATA(0x35, 0x0405);
|
|
LCD_Write_COM_DATA(0x36, 0x0808);
|
|
LCD_Write_COM_DATA(0x37, 0x0407);
|
|
LCD_Write_COM_DATA(0x38, 0x0303);
|
|
LCD_Write_COM_DATA(0x39, 0x0707);
|
|
LCD_Write_COM_DATA(0x3C, 0x0504);
|
|
LCD_Write_COM_DATA(0x3D, 0x0808);
|
|
//------------------ Set GRAM area ---------------//
|
|
LCD_Write_COM_DATA(0x50, 0x0000); // Horizontal GRAM Start Address
|
|
LCD_Write_COM_DATA(0x51, 0x00EF); // Horizontal GRAM End Address
|
|
LCD_Write_COM_DATA(0x52, 0x0000); // Vertical GRAM Start Address
|
|
LCD_Write_COM_DATA(0x53, 0x013F); // Vertical GRAM Start Address
|
|
LCD_Write_COM_DATA(0x60, 0xA700); // Gate Scan Line
|
|
LCD_Write_COM_DATA(0x61, 0x0001); // NDL,VLE, REV
|
|
LCD_Write_COM_DATA(0x6A, 0x0000); // set scrolling line
|
|
//-------------- Partial Display Control ---------//
|
|
LCD_Write_COM_DATA(0x80, 0x0000);
|
|
LCD_Write_COM_DATA(0x81, 0x0000);
|
|
LCD_Write_COM_DATA(0x82, 0x0000);
|
|
LCD_Write_COM_DATA(0x83, 0x0000);
|
|
LCD_Write_COM_DATA(0x84, 0x0000);
|
|
LCD_Write_COM_DATA(0x85, 0x0000);
|
|
//-------------- Panel Control -------------------//
|
|
LCD_Write_COM_DATA(0x90, 0x0010);
|
|
LCD_Write_COM_DATA(0x92, 0x0000);
|
|
LCD_Write_COM_DATA(0x07, 0x0133); // 262K color and display ON
|
|
break;
|