Initial Commit.

MySmartHomeBase.ino

@@ -0,0 +1,149 @@
+
+#include <nodemanager_config.h>
+#include <MySensors.h>
+#include <NodeManager.h>
+
+
+#define SENSOR_CHECK_INTERVAL	4000
+#define MSG_SEND_CYCLES			15
+#define MSG_SEND_INTERVAL		60000
+
+#define PIN_DHT					8
+#define PIN_LDR					A7
+#define PIN_MOTION				2
+#define PIN_DOOR0				7
+#define PIN_DOOR1				6
+#define PIN_DOOR2				5
+#define PIN_DOOR3				4
+#define PIN_BACKLIGHT			A0
+
+#define SENSOR_ID_DHT_TEMP		0
+#define SENSOR_ID_DHT_HUM		1
+#define SENSOR_ID_BMP_TEMP		2
+#define SENSOR_ID_BMP_BARO		3
+#define SENSOR_ID_LDR			4
+#define SENSOR_ID_MQ			5
+//#define SENSOR_ID_SOUND			6
+#define SENSOR_ID_MOTION		7
+#define SENSOR_ID_DOOR0			8
+#define SENSOR_ID_DOOR1			9
+#define SENSOR_ID_DOOR2			10
+#define SENSOR_ID_DOOR3			11
+#define SENSOR_ID_BACKLIGHT		100
+#define SENSOR_ID_VCC			210
+
+#define ADS_CHANNEL_MQ			0
+#define ADS_CHANNEL_SOUND		1
+
+#define I2C_ADDR_ADS			0x48
+#define I2C_ADDR_BMP			0x76
+
+#define DIN_DEBOUNCE			6
+
+#define MQ_RL					1000
+#define MQ_EEPROM_BASE			0
+
+
+
+// We need to subclass here to enable temperature/humidity compensation
+template<
+	uint8_t _tchannel,
+	uint8_t _tsensorId,
+	unsigned _trl = 1000,
+	unsigned _teepromBase = 0,
+	unsigned long _checkInterval = 2000,
+	unsigned long _msgSendTimeout = 30
+> class CustomADS1115ChannelMQ135Module : public ADS1115ChannelMQ135Module<_tchannel, _tsensorId, _trl, _teepromBase, _checkInterval, _msgSendTimeout> {
+public:
+	virtual bool getTempAndHum(float& temp, float& hum) override;
+};
+
+
+// For convenience
+
+typedef SensorDHT<DHT22, PIN_DHT, SENSOR_ID_DHT_TEMP, SENSOR_ID_DHT_HUM, SENSOR_CHECK_INTERVAL, MSG_SEND_CYCLES> MySensorDHT;
+
+typedef SensorADS1115<
+	Tuple<
+		CustomADS1115ChannelMQ135Module<ADS_CHANNEL_MQ, SENSOR_ID_MQ, MQ_RL, MQ_EEPROM_BASE, SENSOR_CHECK_INTERVAL, MSG_SEND_CYCLES>
+	>, I2C_ADDR_ADS
+> MySensorADS1115;
+
+
+
+// create a NodeManager instance
+typedef NodeManager<
+	Tuple<
+		MySensorDHT,
+		SensorBMP280<I2C_ADDR_BMP, SENSOR_ID_BMP_TEMP, SENSOR_ID_BMP_BARO, SENSOR_CHECK_INTERVAL, MSG_SEND_CYCLES>,
+		SensorLDR<PIN_LDR, SENSOR_ID_LDR, SENSOR_CHECK_INTERVAL, MSG_SEND_CYCLES>,
+		MySensorADS1115,
+		SensorMotion<PIN_MOTION, SENSOR_ID_MOTION, INPUT_PULLUP, DIN_DEBOUNCE, MSG_SEND_INTERVAL>,
+		SensorDoor<PIN_DOOR0, SENSOR_ID_DOOR0, INPUT_PULLUP, DIN_DEBOUNCE, MSG_SEND_INTERVAL>,
+		SensorDoor<PIN_DOOR1, SENSOR_ID_DOOR1, INPUT_PULLUP, DIN_DEBOUNCE, MSG_SEND_INTERVAL>,
+		SensorDoor<PIN_DOOR2, SENSOR_ID_DOOR2, INPUT_PULLUP, DIN_DEBOUNCE, MSG_SEND_INTERVAL>,
+		SensorDoor<PIN_DOOR3, SENSOR_ID_DOOR3, INPUT_PULLUP, DIN_DEBOUNCE, MSG_SEND_INTERVAL>,
+		SwitchBacklight<PIN_BACKLIGHT, SENSOR_ID_BACKLIGHT, MSG_SEND_INTERVAL>,
+		SensorVcc<SENSOR_ID_VCC, SENSOR_CHECK_INTERVAL, MSG_SEND_CYCLES>
+	>
+> MyNodeManagerBase;
+
+
+class MyNodeManager : public MyNodeManagerBase {
+protected:
+    virtual void processCommand(const char * message) override {
+		if (strcmp_P(message, PSTR("MQ_CAL")) == 0) {
+			getSensor<3, MySensorADS1115>().calibrateSubmodule<0>();
+		} else {
+			MyNodeManagerBase::processCommand(message);
+		}
+    }
+} nodeManager;
+
+
+
+template<
+	uint8_t _tchannel,
+	uint8_t _tsensorId,
+	unsigned _trl,
+	unsigned _teepromBase,
+	unsigned long _checkInterval,
+	unsigned long _msgSendTimeout
+> bool CustomADS1115ChannelMQ135Module<_tchannel, _tsensorId, _trl, _teepromBase, _checkInterval, _msgSendTimeout>::getTempAndHum(float& temp, float& hum) {
+	auto& dht = nodeManager.getSensor<0, MySensorDHT>();
+	temp = dht.getTemperature();
+	hum = dht.getHumidity();
+	return true;
+}
+
+
+
+void before() {
+	//nodeManager.setSleep(ALWAYS_ON, 2, SECONDS);
+	nodeManager.before();
+}
+
+
+void setup() {
+	nodeManager.setup();
+}
+
+
+void presentation() {
+	nodeManager.presentation();
+}
+
+
+void receive(const MyMessage &message) {
+	nodeManager.receive(message);
+}
+
+
+void receiveTime(unsigned long ts) {
+	nodeManager.receiveTime(ts);
+}
+
+
+void loop() {
+	nodeManager.loop();
+}