diff --git a/systemd/hddfancontrol.conf b/systemd/hddfancontrol.conf
new file mode 100644
index 0000000..1867b62
--- /dev/null
+++ b/systemd/hddfancontrol.conf
@@ -0,0 +1,44 @@
+# HDD fan control daemon startup arguments
+
+# -d DRIVE_FILEPATHS [DRIVE_FILEPATHS ...], --drives DRIVE_FILEPATHS [DRIVE_FILEPATHS ...]
+#                       Drive(s) to get temperature from (ie. /dev/sdX)
+#                       (default: None)
+# -p FAN_PWM_FILEPATH [FAN_PWM_FILEPATH ...], --pwm FAN_PWM_FILEPATH [FAN_PWM_FILEPATH ...]
+#                       PWM filepath(s) to control fan speed (under /sys)
+#                       (default: None)
+# --pwm-start-value FAN_START_VALUE [FAN_START_VALUE ...]
+#                       PWM value (0-255), at which the fan starts moving. Use
+#                       the -t parameter, or run pwmconfig to find this value.
+#                       (default: None)
+# --pwm-stop-value FAN_STOP_VALUE [FAN_STOP_VALUE ...]
+#                       PWM value (0-255), at which the fan stop moving. Use
+#                       the -t parameter, or run pwmconfig to find this value.
+#                       Often 20-40 lower than start speed. (default: None)
+# --min-temp MIN_TEMP   Temperature in Celcius at which the fan(s) will be set
+#                       to minimum speed. (default: 30)
+# --max-temp MAX_TEMP   Temperature in Celcius at which the fan(s) will be set
+#                       to maximum speed. (default: 50)
+# --min-fan-speed-prct MIN_FAN_SPEED_PRCT
+#                       Minimum percentage of full fan speed to set the fan
+#                       to. Never set to 0 unless you have other fans to cool
+#                       down your system, or a case specially designed for
+#                       passive cooling. (default: 20)
+# -i INTERVAL_S, --interval INTERVAL_S
+#                       Interval in seconds to check temperature and adjust
+#                       fan speed. (default: 60)
+# --spin-down-time SPIN_DOWN_TIME_S
+#                       Interval in seconds after which inactive drives will
+#                       be put to standby state. (default: None)
+# -v {warning,normal,debug}, --verbosity {warning,normal,debug}
+#                       Level of logging output (default: normal)
+# -l LOG_FILEPATH, --log-file LOG_FILEPATH
+#                       Filepath for log output when using daemon mode, if
+#                       omitted, logging goes to syslog. (default: None)
+# --hddtemp-daemon      Get drive temperature from hddtemp daemon instead of
+#                       spawning a new process each time temperature is probed
+#                       (default: False)
+# --hddtemp-daemon-port HDDTEMP_DAEMON_PORT
+#                       hddtemp daemon port if option --hddtemp-daemon is used
+#                       (default: 7634)
+
+HDDFANCONTROL_ARGS=""
diff --git a/systemd/hddfancontrol.service b/systemd/hddfancontrol.service
new file mode 100644
index 0000000..07f556a
--- /dev/null
+++ b/systemd/hddfancontrol.service
@@ -0,0 +1,9 @@
+[Unit]
+Description=HDD fan control
+
+[Service]
+EnvironmentFile=/etc/conf.d/hddfancontrol
+ExecStart=/usr/bin/hddfancontrol $HDDFANCONTROL_ARGS
+
+[Install]
+WantedBy=multi-user.target