45 lines
2.6 KiB
Plaintext
45 lines
2.6 KiB
Plaintext
# HDD fan control daemon startup arguments
|
|
|
|
# -d DRIVE_FILEPATHS [DRIVE_FILEPATHS ...], --drives DRIVE_FILEPATHS [DRIVE_FILEPATHS ...]
|
|
# Drive(s) to get temperature from (ie. /dev/sdX)
|
|
# (default: None)
|
|
# -p FAN_PWM_FILEPATH [FAN_PWM_FILEPATH ...], --pwm FAN_PWM_FILEPATH [FAN_PWM_FILEPATH ...]
|
|
# PWM filepath(s) to control fan speed (under /sys)
|
|
# (default: None)
|
|
# --pwm-start-value FAN_START_VALUE [FAN_START_VALUE ...]
|
|
# PWM value (0-255), at which the fan starts moving. Use
|
|
# the -t parameter, or run pwmconfig to find this value.
|
|
# (default: None)
|
|
# --pwm-stop-value FAN_STOP_VALUE [FAN_STOP_VALUE ...]
|
|
# PWM value (0-255), at which the fan stop moving. Use
|
|
# the -t parameter, or run pwmconfig to find this value.
|
|
# Often 20-40 lower than start speed. (default: None)
|
|
# --min-temp MIN_TEMP Temperature in Celcius at which the fan(s) will be set
|
|
# to minimum speed. (default: 30)
|
|
# --max-temp MAX_TEMP Temperature in Celcius at which the fan(s) will be set
|
|
# to maximum speed. (default: 50)
|
|
# --min-fan-speed-prct MIN_FAN_SPEED_PRCT
|
|
# Minimum percentage of full fan speed to set the fan
|
|
# to. Never set to 0 unless you have other fans to cool
|
|
# down your system, or a case specially designed for
|
|
# passive cooling. (default: 20)
|
|
# -i INTERVAL_S, --interval INTERVAL_S
|
|
# Interval in seconds to check temperature and adjust
|
|
# fan speed. (default: 60)
|
|
# --spin-down-time SPIN_DOWN_TIME_S
|
|
# Interval in seconds after which inactive drives will
|
|
# be put to standby state. (default: None)
|
|
# -v {warning,normal,debug}, --verbosity {warning,normal,debug}
|
|
# Level of logging output (default: normal)
|
|
# -l LOG_FILEPATH, --log-file LOG_FILEPATH
|
|
# Filepath for log output when using daemon mode, if
|
|
# omitted, logging goes to syslog. (default: None)
|
|
# --hddtemp-daemon Get drive temperature from hddtemp daemon instead of
|
|
# spawning a new process each time temperature is probed
|
|
# (default: False)
|
|
# --hddtemp-daemon-port HDDTEMP_DAEMON_PORT
|
|
# hddtemp daemon port if option --hddtemp-daemon is used
|
|
# (default: 7634)
|
|
|
|
HDDFANCONTROL_ARGS=""
|