Merge pull request #109 from thozza/development-leds

Add LEDs blinking into base MySensor class without any library dependency

libraries/MySensors/MyConfig.h

@@ -45,6 +45,26 @@
 #define MY_OTA_FLASH_JDECID 0x1F65
 
 
+/**********************************
+*  Information LEDs blinking
+***********************************/
+// This feature enables LEDs blinking on message receive, transmit
+// or if some error occured. This was commonly used only in gateways,
+// but now can be used in any sensor node. Also the LEDs can now be
+// disabled in the gateway.
+
+// #define WITH_LEDS_BLINKING
+
+// default LEDs blinking period in milliseconds
+#define DEFAULT_LED_BLINK_PERIOD 300
+// The RX LED default pin
+#define DEFAULT_RX_LED_PIN 8
+// The TX LED default pin
+#define DEFAULT_TX_LED_PIN 9
+// The Error LED default pin
+#define DEFAULT_ERR_LED_PIN 7
+
+
 /**********************************
 *  Message Signing Settings
 ***********************************/

libraries/MySensors/MySensor.cpp

@@ -52,6 +52,9 @@ static inline bool isValidDistance( const uint8_t distance ) {
 MySensor::MySensor(MyTransport &_radio, MyHw &_hw
 #ifdef MY_SIGNING_FEATURE
 	, MySigning &_signer
+#endif
+#ifdef WITH_LEDS_BLINKING
+		, uint8_t _rx, uint8_t _tx, uint8_t _er, unsigned long _blink_period
 #endif
 	)
 	:
@@ -59,6 +62,9 @@ MySensor::MySensor(MyTransport &_radio, MyHw &_hw
 #ifdef MY_SIGNING_FEATURE
 	signer(_signer),
 #endif
+#ifdef WITH_LEDS_BLINKING
+	pinRx(_rx), pinTx(_tx), pinEr(_er), ledBlinkPeriod(_blink_period),
+#endif
 #ifdef MY_OTA_FIRMWARE_FEATURE
  	flash(MY_OTA_FLASH_SS, MY_OTA_FLASH_JDECID),
 #endif
@@ -90,6 +96,64 @@ bool MySensor::isValidFirmware() {
 
 #endif
 
+#ifdef WITH_LEDS_BLINKING
+void MySensor::handleLedsBlinking() {
+	static unsigned long next_time = hw_millis() + ledBlinkPeriod;
+
+	// Just return if it is not the time...
+	// http://playground.arduino.cc/Code/TimingRollover
+	if ((long)(hw_millis() - next_time) < 0)
+		return;
+	else
+		next_time = hw_millis() + ledBlinkPeriod;
+
+	// do the actual blinking
+	if(countRx && countRx != 255) {
+		// switch led on
+		digitalWrite(pinRx, LOW);
+	}
+	else if(!countRx) {
+		// switching off
+		digitalWrite(pinRx, HIGH);
+	}
+	if(countRx != 255)
+		--countRx;
+
+	if(countTx && countTx != 255) {
+		// switch led on
+		digitalWrite(pinTx, LOW);
+	}
+	else if(!countTx) {
+		// switching off
+		digitalWrite(pinTx, HIGH);
+	}
+	if(countTx != 255)
+		--countTx;
+
+	if(countErr && countErr != 255) {
+		// switch led on
+		digitalWrite(pinEr, LOW);
+	}
+	else if(!countErr) {
+		// switching off
+		digitalWrite(pinEr, HIGH);
+	}
+	if(countErr != 255)
+		--countErr;
+}
+
+void MySensor::rxBlink(uint8_t cnt) {
+  if(countRx == 255) { countRx = cnt; }
+}
+
+void MySensor::txBlink(uint8_t cnt) {
+  if(countTx == 255) { countTx = cnt; }
+}
+
+void MySensor::errBlink(uint8_t cnt) {
+  if(countErr == 255) { countErr = cnt; }
+}
+#endif
 
 void MySensor::begin(void (*_msgCallback)(const MyMessage &), uint8_t _nodeId, boolean _repeaterMode, uint8_t _parentNodeId) {
 	hw_init();
@@ -111,6 +175,23 @@ void MySensor::begin(void (*_msgCallback)(const MyMessage &), uint8_t _nodeId, b
 	hw_readConfigBlock((void*)doSign, (void*)EEPROM_SIGNING_REQUIREMENT_TABLE_ADDRESS, sizeof(doSign));
 #endif
 
+#ifdef WITH_LEDS_BLINKING
+	// Setup led pins
+	pinMode(pinRx, OUTPUT);
+	pinMode(pinTx, OUTPUT);
+	pinMode(pinEr, OUTPUT);
+
+	// Set initial state of leds
+	digitalWrite(pinRx, HIGH);
+	digitalWrite(pinTx, HIGH);
+	digitalWrite(pinEr, HIGH);
+
+	// initialize counters
+	countRx = 0;
+	countTx = 0;
+	countErr = 0;
+#endif
+
 	if (isGateway) {
 		// Set configuration for gateway
 		nc.parentNodeId = GATEWAY_ADDRESS;
@@ -246,12 +327,18 @@ boolean MySensor::sendRoute(MyMessage &message) {
 	// If we still don't have any parent id, re-request and skip this message.
 	if (nc.parentNodeId == AUTO) {
 		findParentNode();
+#ifdef WITH_LEDS_BLINKING
+		errBlink(1);
+#endif
 		return false;
 	}
 
 	// If we still don't have any node id, re-request and skip this message.
 	if (nc.nodeId == AUTO) {
 		requestNodeId();
+#ifdef WITH_LEDS_BLINKING
+		errBlink(1);
+#endif
 		return false;
 	}
 
@@ -288,10 +375,16 @@ boolean MySensor::sendRoute(MyMessage &message) {
 		}
 		if (hw_millis() - enter > MY_VERIFICATION_TIMEOUT_MS) {
 			debug(PSTR("nonce tmo\n"));
+#ifdef WITH_LEDS_BLINKING
+			errBlink(1);
+#endif
 			return false;
 		}
 		if (!signOk) {
 			debug(PSTR("sign fail\n"));
+#ifdef WITH_LEDS_BLINKING
+			errBlink(1);
+#endif
 			return false;
 		}
 		// After this point, only the 'last' member of the message structure is allowed to be altered if the message has been signed,
@@ -350,6 +443,9 @@ boolean MySensor::sendRoute(MyMessage &message) {
 	if (!ok) {
 		// Failure when sending to parent node. The parent node might be down and we
 		// need to find another route to gateway.
+#ifdef WITH_LEDS_BLINKING
+		errBlink(1);
+#endif
 		failedTransmissions++;
 		if (autoFindParent && failedTransmissions > SEARCH_FAILURES) {
 			findParentNode();
@@ -364,6 +460,9 @@ boolean MySensor::sendWrite(uint8_t to, MyMessage &message) {
 	mSetVersion(message, PROTOCOL_VERSION);
 	uint8_t length = mGetSigned(message) ? MAX_MESSAGE_LENGTH : mGetLength(message);
 	message.last = nc.nodeId;
+#ifdef WITH_LEDS_BLINKING
+	txBlink(1);
+#endif
 	bool ok = radio.send(to, &message, min(MAX_MESSAGE_LENGTH, HEADER_SIZE + length));
 
 	debug(PSTR("send: %d-%d-%d-%d s=%d,c=%d,t=%d,pt=%d,l=%d,sg=%d,st=%s:%s\n"),
@@ -408,6 +507,11 @@ void MySensor::requestTime(void (* _timeCallback)(unsigned long)) {
 
 boolean MySensor::process() {
 	hw_watchdogReset();
+
+#ifdef WITH_LEDS_BLINKING
+	handleLedsBlinking();
+#endif
+
 	uint8_t to = 0;
 	if (!radio.available(&to))
 	{
@@ -418,6 +522,9 @@ boolean MySensor::process() {
 				debug(PSTR("fw upd fail\n"));
 				// Give up. We have requested MY_OTA_RETRY times without any packet in return.
 				fwUpdateOngoing = false;
+#ifdef WITH_LEDS_BLINKING
+				errBlink(1);
+#endif
 				return false;
 			}
 			fwRetry--;
@@ -439,6 +546,9 @@ boolean MySensor::process() {
 #endif
 
 	uint8_t len = radio.receive((uint8_t *)&msg);
+#ifdef WITH_LEDS_BLINKING
+	rxBlink(1);
+#endif
 
 #ifdef MY_SIGNING_FEATURE
 	// Before processing message, reject unsigned messages if signing is required and check signature (if it is signed and addressed to us)
@@ -451,10 +561,16 @@ boolean MySensor::process() {
 		if (!mGetSigned(msg)) {
 			// Got unsigned message that should have been signed
 			debug(PSTR("no sign\n"));
+#ifdef WITH_LEDS_BLINKING
+			errBlink(1);
+#endif
 			return false;
 		}
 		else if (!signer.verifyMsg(msg)) {
 			debug(PSTR("verify fail\n"));
+#ifdef WITH_LEDS_BLINKING
+			errBlink(1);
+#endif
 			return false; // This signed message has been tampered with!
 		}
 	}
@@ -468,6 +584,9 @@ boolean MySensor::process() {
 
 	if(!(mGetVersion(msg) == PROTOCOL_VERSION)) {
 		debug(PSTR("ver mismatch\n"));
+#ifdef WITH_LEDS_BLINKING
+		errBlink(1);
+#endif
 		return false;
 	}
 

libraries/MySensors/MySensor.h

@@ -145,6 +145,12 @@ class MySensor
 	MySensor(MyTransport &radio =*new MyTransportNRF24(), MyHw &hw=*new MyHwDriver()
 #ifdef MY_SIGNING_FEATURE
 		, MySigning &signer=*new MySigningNone()
+#endif
+#ifdef WITH_LEDS_BLINKING
+		, uint8_t _rx=DEFAULT_RX_LED_PIN,
+		uint8_t _tx=DEFAULT_TX_LED_PIN,
+		uint8_t _er=DEFAULT_ERR_LED_PIN,
+		unsigned long _blink_period=DEFAULT_LED_BLINK_PERIOD
 #endif
 		);
 
@@ -299,6 +305,15 @@ class MySensor
 	 */
 	int8_t sleep(uint8_t interrupt1, uint8_t mode1, uint8_t interrupt2, uint8_t mode2, unsigned long ms=0);
 
+#ifdef WITH_LEDS_BLINKING
+	/**
+	 * Blink with LEDs
+	 * @param cnt how many blink cycles to keep the LED on. Default cycle is 300ms
+	 */
+	void rxBlink(uint8_t cnt);
+	void txBlink(uint8_t cnt);
+	void errBlink(uint8_t cnt);
+#endif
 
   protected:
 	NodeConfig nc; // Essential settings for node to work
@@ -324,6 +339,20 @@ class MySensor
 	MySigning& signer;
 #endif
 
+#ifdef WITH_LEDS_BLINKING
+	uint8_t pinRx; // Rx led pin
+	uint8_t pinTx; // Tx led pin
+	uint8_t pinEr; // Err led pin
+
+	// these variables don't need to be volatile, since we are not using interrupts
+	uint8_t countRx;
+	uint8_t countTx;
+	uint8_t countErr;
+
+	unsigned long ledBlinkPeriod;
+	void handleLedsBlinking(); // do the actual blinking
+#endif
+
 	MyTransport& radio;
 	MyHw& hw;
 	

libraries/MySensors/examples/EthernetGateway/EthernetGateway.ino

@@ -46,6 +46,7 @@
  * E.g. If you want to use the defualt values in this sketch enter: 192.168.178.66:5003
  *
  * LED purposes:
+ * - To use the feature, uncomment WITH_LEDS_BLINKING in MyConfig.h
  * - RX (green) - blink fast on radio message recieved. In inclusion mode will blink fast only on presentation recieved
  * - TX (yellow) - blink fast on radio message transmitted. In inclusion mode will blink slowly
  * - ERR (red) - fast blink on error during transmission error or recieve crc error  
@@ -68,7 +69,6 @@
 #include <MyParserSerial.h>  
 #include <MySensor.h>  
 #include <stdarg.h>
-#include <MsTimer2.h>
 #include <PinChangeInt.h>
 #include "GatewayUtil.h"
 
@@ -104,7 +104,12 @@ MyTransportNRF24 transport(RF24_CE_PIN, RF24_CS_PIN, RF24_PA_LEVEL_GW);
 MyHwATMega328 hw;
 
 // Construct MySensors library (signer needed if MY_SIGNING_FEATURE is turned on in MyConfig.h)
+// To use LEDs blinking, uncomment WITH_LEDS_BLINKING in MyConfig.h
+#ifdef WITH_LEDS_BLINKING
+MySensor gw(transport, hw /*, signer*/, RADIO_RX_LED_PIN, RADIO_TX_LED_PIN, RADIO_ERROR_LED_PIN);
+#else
 MySensor gw(transport, hw /*, signer*/);
+#endif
 
 
 #define IP_PORT 5003        // The port you want to open 
@@ -136,11 +141,8 @@ void output(const char *fmt, ... ) {
 void setup()  
 { 
   Ethernet.begin(mac, myIp);
-  setupGateway(RADIO_RX_LED_PIN, RADIO_TX_LED_PIN, RADIO_ERROR_LED_PIN, INCLUSION_MODE_PIN, INCLUSION_MODE_TIME, output);
 
-  // Add led timer interrupt
+  setupGateway(INCLUSION_MODE_PIN, INCLUSION_MODE_TIME, output);
-  MsTimer2::set(300, ledTimersInterrupt);
-  MsTimer2::start();
 
   // Add interrupt for inclusion button to pin
   PCintPort::attachInterrupt(pinInclusion, startInclusionInterrupt, RISING);

libraries/MySensors/examples/EthernetGateway/GatewayUtil.h

@@ -7,9 +7,6 @@
 #ifdef ARDUINO
 
 
-uint8_t pinRx = 8; // Rx led pin
-uint8_t pinTx = 9; // Tx led pin
-uint8_t pinEr = 7; // Err led pin
 uint8_t inclusionTime = 1; // Number of minutes inclusion mode is enabled
 uint8_t pinInclusion =  3; // Input pin that should trigger inclusion mode
 
@@ -17,56 +14,28 @@ uint8_t pinInclusion =  3; // Input pin that should trigger inclusion mode
 #define MAX_SEND_LENGTH 120 // Max buffersize needed for messages destined for controller
 
 volatile boolean buttonTriggeredInclusion;
-volatile uint8_t countRx;
-volatile uint8_t countTx;
-volatile uint8_t countErr;
 boolean inclusionMode; // Keeps track on inclusion mode
 void (*serial)(const char *fmt, ... );
 
 MyParserSerial parser;
 
 void setInclusionMode(boolean newMode);
-void txBlink(uint8_t cnt);
-void rxBlink(uint8_t cnt);
-void errBlink(uint8_t cnt);
 
 char convBuf[MAX_PAYLOAD*2+1];
 char serialBuffer[MAX_SEND_LENGTH]; // Buffer for building string when sending data to vera
 unsigned long inclusionStartTime;
 
-void setupGateway(uint8_t _rx, uint8_t _tx, uint8_t _er, uint8_t _inc, uint8_t _incTime, void (* _serial)(const char *, ... )) {
+void setupGateway(uint8_t _inc, uint8_t _incTime, void (* _serial)(const char *, ... )) {
   inclusionMode = 0;
   buttonTriggeredInclusion = false;
   serial = _serial;
 
-  pinRx = _rx;
-  pinTx = _tx;
-  pinEr = _er;
   pinInclusion = _inc;
   inclusionTime = _incTime;
   
-  countRx = 0;
-  countTx = 0;
-  countErr = 0;
-
-
-  // Setup led pins
-  pinMode(pinRx, OUTPUT);
-  pinMode(pinTx, OUTPUT);
-  pinMode(pinEr, OUTPUT);
-  digitalWrite(pinRx, LOW);
-  digitalWrite(pinTx, LOW);
-  digitalWrite(pinEr, LOW);
-
   // Setup digital in that triggers inclusion mode
   pinMode(pinInclusion, INPUT);
   digitalWrite(pinInclusion, HIGH);
-
-  // Set initial state of leds
-  digitalWrite(pinRx, HIGH);
-  digitalWrite(pinTx, HIGH);
-  digitalWrite(pinEr, HIGH);
-
 }
 
 
@@ -76,11 +45,11 @@ void startInclusionInterrupt() {
 }
 
 void incomingMessage(const MyMessage &message) {
-  if (mGetCommand(message) == C_PRESENTATION && inclusionMode) {
+//  if (mGetCommand(message) == C_PRESENTATION && inclusionMode) {
-	rxBlink(3);
+//	gw.rxBlink(3);
-   } else {
+//   } else {
-	rxBlink(1);
+//	gw.rxBlink(1);
-   }
+//   }
    // Pass along the message from sensors to serial line
    serial(PSTR("%d;%d;%d;%d;%d;%s\n"),message.sender, message.sensor, mGetCommand(message), mGetAck(message), message.type, message.getString(convBuf));
 } 
@@ -106,7 +75,7 @@ void checkInclusionFinished() {
   }
 }
 
-void parseAndSend(MySensor gw, char *commandBuffer) {
+void parseAndSend(MySensor &gw, char *commandBuffer) {
   boolean ok;
   MyMessage &msg = gw.getLastMessage();
 
@@ -123,10 +92,14 @@ void parseAndSend(MySensor gw, char *commandBuffer) {
         setInclusionMode(atoi(msg.data) == 1);
       }
     } else {
-      txBlink(1);
+      #ifdef WITH_LEDS_BLINKING
+      gw.txBlink(1);
+      #endif
       ok = gw.sendRoute(msg);
       if (!ok) {
-        errBlink(1);
+        #ifdef WITH_LEDS_BLINKING
+        gw.errBlink(1);
+        #endif
       }
     }
   }
@@ -145,50 +118,6 @@ void setInclusionMode(boolean newMode) {
 }
 
 
-
-
-void ledTimersInterrupt() {
-  if(countRx && countRx != 255) {
-    // switch led on
-    digitalWrite(pinRx, LOW);
-  } else if(!countRx) {
-     // switching off
-     digitalWrite(pinRx, HIGH);
-   }
-   if(countRx != 255) { countRx--; }
-
-  if(countTx && countTx != 255) {
-    // switch led on
-    digitalWrite(pinTx, LOW);
-  } else if(!countTx) {
-     // switching off
-     digitalWrite(pinTx, HIGH);
-   }
-   if(countTx != 255) { countTx--; }
-   else if(inclusionMode) { countTx = 8; }
-
-  if(countErr && countErr != 255) {
-    // switch led on
-    digitalWrite(pinEr, LOW);
-  } else if(!countErr) {
-     // switching off
-     digitalWrite(pinEr, HIGH);
-   }
-   if(countErr != 255) { countErr--; }
-}
-
-void rxBlink(uint8_t cnt) {
-  if(countRx == 255) { countRx = cnt; }
-}
-void txBlink(uint8_t cnt) {
-  if(countTx == 255 && !inclusionMode) { countTx = cnt; }
-}
-void errBlink(uint8_t cnt) {
-  if(countErr == 255) { countErr = cnt; }
-}
-
-
-
 #else
 #error This example is only for use on Arduino.
 #endif // ARDUINO

libraries/MySensors/examples/SerialGateway/GatewayUtil.h

@@ -27,9 +27,6 @@
 #ifdef ARDUINO
 
 
-uint8_t pinRx = 8; // Rx led pin
-uint8_t pinTx = 9; // Tx led pin
-uint8_t pinEr = 7; // Err led pin
 uint8_t inclusionTime = 1; // Number of minutes inclusion mode is enabled
 uint8_t pinInclusion =  3; // Input pin that should trigger inclusion mode
 
@@ -37,56 +34,28 @@ uint8_t pinInclusion =  3; // Input pin that should trigger inclusion mode
 #define MAX_SEND_LENGTH 120 // Max buffersize needed for messages destined for controller
 
 volatile boolean buttonTriggeredInclusion;
-volatile uint8_t countRx;
-volatile uint8_t countTx;
-volatile uint8_t countErr;
 boolean inclusionMode; // Keeps track on inclusion mode
 void (*serial)(const char *fmt, ... );
 
 MyParserSerial parser;
 
 void setInclusionMode(boolean newMode);
-void txBlink(uint8_t cnt);
-void rxBlink(uint8_t cnt);
-void errBlink(uint8_t cnt);
 
 char convBuf[MAX_PAYLOAD*2+1];
 char serialBuffer[MAX_SEND_LENGTH]; // Buffer for building string when sending data to vera
 unsigned long inclusionStartTime;
 
-void setupGateway(uint8_t _rx, uint8_t _tx, uint8_t _er, uint8_t _inc, uint8_t _incTime, void (* _serial)(const char *, ... )) {
+void setupGateway(uint8_t _inc, uint8_t _incTime, void (* _serial)(const char *, ... )) {
   inclusionMode = 0;
   buttonTriggeredInclusion = false;
   serial = _serial;
 
-  pinRx = _rx;
-  pinTx = _tx;
-  pinEr = _er;
   pinInclusion = _inc;
   inclusionTime = _incTime;
   
-  countRx = 0;
-  countTx = 0;
-  countErr = 0;
-
-
-  // Setup led pins
-  pinMode(pinRx, OUTPUT);
-  pinMode(pinTx, OUTPUT);
-  pinMode(pinEr, OUTPUT);
-  digitalWrite(pinRx, LOW);
-  digitalWrite(pinTx, LOW);
-  digitalWrite(pinEr, LOW);
-
   // Setup digital in that triggers inclusion mode
   pinMode(pinInclusion, INPUT);
   digitalWrite(pinInclusion, HIGH);
-
-  // Set initial state of leds
-  digitalWrite(pinRx, HIGH);
-  digitalWrite(pinTx, HIGH);
-  digitalWrite(pinEr, HIGH);
-
 }
 
 
@@ -96,11 +65,11 @@ void startInclusionInterrupt() {
 }
 
 void incomingMessage(const MyMessage &message) {
-  if (mGetCommand(message) == C_PRESENTATION && inclusionMode) {
+//  if (mGetCommand(message) == C_PRESENTATION && inclusionMode) {
-	rxBlink(3);
+//	gw.rxBlink(3);
-   } else {
+//   } else {
-	rxBlink(1);
+//	gw.rxBlink(1);
-   }
+//   }
    // Pass along the message from sensors to serial line
    serial(PSTR("%d;%d;%d;%d;%d;%s\n"),message.sender, message.sensor, mGetCommand(message), mGetAck(message), message.type, message.getString(convBuf));
 } 
@@ -126,7 +95,7 @@ void checkInclusionFinished() {
   }
 }
 
-void parseAndSend(MySensor gw, char *commandBuffer) {
+void parseAndSend(MySensor &gw, char *commandBuffer) {
   boolean ok;
   MyMessage &msg = gw.getLastMessage();
 
@@ -143,10 +112,14 @@ void parseAndSend(MySensor gw, char *commandBuffer) {
         setInclusionMode(atoi(msg.data) == 1);
       }
     } else {
-      txBlink(1);
+      #ifdef WITH_LEDS_BLINKING
+      gw.txBlink(1);
+      #endif
       ok = gw.sendRoute(msg);
       if (!ok) {
-        errBlink(1);
+        #ifdef WITH_LEDS_BLINKING
+        gw.errBlink(1);
+        #endif
       }
     }
   }
@@ -165,50 +138,6 @@ void setInclusionMode(boolean newMode) {
 }
 
 
-
-
-void ledTimersInterrupt() {
-  if(countRx && countRx != 255) {
-    // switch led on
-    digitalWrite(pinRx, LOW);
-  } else if(!countRx) {
-     // switching off
-     digitalWrite(pinRx, HIGH);
-   }
-   if(countRx != 255) { countRx--; }
-
-  if(countTx && countTx != 255) {
-    // switch led on
-    digitalWrite(pinTx, LOW);
-  } else if(!countTx) {
-     // switching off
-     digitalWrite(pinTx, HIGH);
-   }
-   if(countTx != 255) { countTx--; }
-   else if(inclusionMode) { countTx = 8; }
-
-  if(countErr && countErr != 255) {
-    // switch led on
-    digitalWrite(pinEr, LOW);
-  } else if(!countErr) {
-     // switching off
-     digitalWrite(pinEr, HIGH);
-   }
-   if(countErr != 255) { countErr--; }
-}
-
-void rxBlink(uint8_t cnt) {
-  if(countRx == 255) { countRx = cnt; }
-}
-void txBlink(uint8_t cnt) {
-  if(countTx == 255 && !inclusionMode) { countTx = cnt; }
-}
-void errBlink(uint8_t cnt) {
-  if(countErr == 255) { countErr = cnt; }
-}
-
-
-
 #else
 #error This example is only for use on Arduino.
 #endif // ARDUINO

libraries/MySensors/examples/SerialGateway/SerialGateway.ino

@@ -29,6 +29,7 @@
  * - RX/TX/ERR leds need to be connected between +5V (anode) and digital pin 6/5/4 with resistor 270-330R in a series
  *
  * LEDs (OPTIONAL):
+ * - To use the feature, uncomment WITH_LEDS_BLINKING in MyConfig.h
  * - RX (green) - blink fast on radio message recieved. In inclusion mode will blink fast only on presentation recieved
  * - TX (yellow) - blink fast on radio message transmitted. In inclusion mode will blink slowly
  * - ERR (red) - fast blink on error during transmission error or recieve crc error 
@@ -48,7 +49,6 @@
 #include <MyParserSerial.h>  
 #include <MySensor.h>  
 #include <stdarg.h>
-#include <MsTimer2.h>
 #include <PinChangeInt.h>
 #include "GatewayUtil.h"
 
@@ -59,7 +59,7 @@
 #define RADIO_TX_LED_PIN    5  // the PCB, on board LED
 
 // NRFRF24L01 radio driver (set low transmit power by default) 
-MyTransportNRF24 transport(RF24_CE_PIN, RF24_CS_PIN, RF24_PA_LEVEL_GW);  
+MyTransportNRF24 transport(RF24_CE_PIN, RF24_CS_PIN, RF24_PA_LEVEL_GW);
 //MyTransportRFM69 transport;
 
 // Message signing driver (signer needed if MY_SIGNING_FEATURE is turned on in MyConfig.h)
@@ -71,7 +71,12 @@ MyTransportNRF24 transport(RF24_CE_PIN, RF24_CS_PIN, RF24_PA_LEVEL_GW);
 MyHwATMega328 hw;
 
 // Construct MySensors library (signer needed if MY_SIGNING_FEATURE is turned on in MyConfig.h)
+// To use LEDs blinking, uncomment WITH_LEDS_BLINKING in MyConfig.h
+#ifdef WITH_LEDS_BLINKING
+MySensor gw(transport, hw /*, signer*/, RADIO_RX_LED_PIN, RADIO_TX_LED_PIN, RADIO_ERROR_LED_PIN);
+#else
 MySensor gw(transport, hw /*, signer*/);
+#endif
 
 char inputString[MAX_RECEIVE_LENGTH] = "";    // A string to hold incoming commands from serial/ethernet interface
 int inputPos = 0;
@@ -92,11 +97,7 @@ void setup()
 { 
   gw.begin(incomingMessage, 0, true, 0);
 
-  setupGateway(RADIO_RX_LED_PIN, RADIO_TX_LED_PIN, RADIO_ERROR_LED_PIN, INCLUSION_MODE_PIN, INCLUSION_MODE_TIME, output);  
+  setupGateway(INCLUSION_MODE_PIN, INCLUSION_MODE_TIME, output);
-
-  // Add led timer interrupt
-  MsTimer2::set(300, ledTimersInterrupt);
-  MsTimer2::start();
 
   // Add interrupt for inclusion button to pin
   PCintPort::attachInterrupt(pinInclusion, startInclusionInterrupt, RISING);